| /* |
| * DMA memory preregistration |
| * |
| * Authors: |
| * Alexey Kardashevskiy <aik@ozlabs.ru> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include <sys/ioctl.h> |
| #include <linux/vfio.h> |
| #ifdef CONFIG_KVM |
| #include <linux/kvm.h> |
| #endif |
| #include "sysemu/kvm.h" |
| #include "exec/address-spaces.h" |
| |
| #include "hw/vfio/vfio-common.h" |
| #include "hw/hw.h" |
| #include "exec/ram_addr.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "trace.h" |
| |
| typedef struct VFIOSpaprContainer { |
| VFIOContainer container; |
| MemoryListener prereg_listener; |
| QLIST_HEAD(, VFIOHostDMAWindow) hostwin_list; |
| } VFIOSpaprContainer; |
| |
| static bool vfio_prereg_listener_skipped_section(MemoryRegionSection *section) |
| { |
| if (memory_region_is_iommu(section->mr)) { |
| hw_error("Cannot possibly preregister IOMMU memory"); |
| } |
| |
| return !memory_region_is_ram(section->mr) || |
| memory_region_is_ram_device(section->mr); |
| } |
| |
| static void *vfio_prereg_gpa_to_vaddr(MemoryRegionSection *section, hwaddr gpa) |
| { |
| return memory_region_get_ram_ptr(section->mr) + |
| section->offset_within_region + |
| (gpa - section->offset_within_address_space); |
| } |
| |
| static void vfio_prereg_listener_region_add(MemoryListener *listener, |
| MemoryRegionSection *section) |
| { |
| VFIOSpaprContainer *scontainer = container_of(listener, VFIOSpaprContainer, |
| prereg_listener); |
| VFIOContainer *container = &scontainer->container; |
| VFIOContainerBase *bcontainer = &container->bcontainer; |
| const hwaddr gpa = section->offset_within_address_space; |
| hwaddr end; |
| int ret; |
| hwaddr page_mask = qemu_real_host_page_mask(); |
| struct vfio_iommu_spapr_register_memory reg = { |
| .argsz = sizeof(reg), |
| .flags = 0, |
| }; |
| |
| if (vfio_prereg_listener_skipped_section(section)) { |
| trace_vfio_prereg_listener_region_add_skip( |
| section->offset_within_address_space, |
| section->offset_within_address_space + |
| int128_get64(int128_sub(section->size, int128_one()))); |
| return; |
| } |
| |
| if (unlikely((section->offset_within_address_space & ~page_mask) || |
| (section->offset_within_region & ~page_mask) || |
| (int128_get64(section->size) & ~page_mask))) { |
| error_report("%s received unaligned region", __func__); |
| return; |
| } |
| |
| end = section->offset_within_address_space + int128_get64(section->size); |
| if (gpa >= end) { |
| return; |
| } |
| |
| memory_region_ref(section->mr); |
| |
| reg.vaddr = (uintptr_t) vfio_prereg_gpa_to_vaddr(section, gpa); |
| reg.size = end - gpa; |
| |
| ret = ioctl(container->fd, VFIO_IOMMU_SPAPR_REGISTER_MEMORY, ®); |
| trace_vfio_prereg_register(reg.vaddr, reg.size, ret ? -errno : 0); |
| if (ret) { |
| /* |
| * On the initfn path, store the first error in the container so we |
| * can gracefully fail. Runtime, there's not much we can do other |
| * than throw a hardware error. |
| */ |
| if (!bcontainer->initialized) { |
| if (!bcontainer->error) { |
| error_setg_errno(&bcontainer->error, -ret, |
| "Memory registering failed"); |
| } |
| } else { |
| hw_error("vfio: Memory registering failed, unable to continue"); |
| } |
| } |
| } |
| |
| static void vfio_prereg_listener_region_del(MemoryListener *listener, |
| MemoryRegionSection *section) |
| { |
| VFIOSpaprContainer *scontainer = container_of(listener, VFIOSpaprContainer, |
| prereg_listener); |
| VFIOContainer *container = &scontainer->container; |
| const hwaddr gpa = section->offset_within_address_space; |
| hwaddr end; |
| int ret; |
| hwaddr page_mask = qemu_real_host_page_mask(); |
| struct vfio_iommu_spapr_register_memory reg = { |
| .argsz = sizeof(reg), |
| .flags = 0, |
| }; |
| |
| if (vfio_prereg_listener_skipped_section(section)) { |
| trace_vfio_prereg_listener_region_del_skip( |
| section->offset_within_address_space, |
| section->offset_within_address_space + |
| int128_get64(int128_sub(section->size, int128_one()))); |
| return; |
| } |
| |
| if (unlikely((section->offset_within_address_space & ~page_mask) || |
| (section->offset_within_region & ~page_mask) || |
| (int128_get64(section->size) & ~page_mask))) { |
| error_report("%s received unaligned region", __func__); |
| return; |
| } |
| |
| end = section->offset_within_address_space + int128_get64(section->size); |
| if (gpa >= end) { |
| return; |
| } |
| |
| reg.vaddr = (uintptr_t) vfio_prereg_gpa_to_vaddr(section, gpa); |
| reg.size = end - gpa; |
| |
| ret = ioctl(container->fd, VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY, ®); |
| trace_vfio_prereg_unregister(reg.vaddr, reg.size, ret ? -errno : 0); |
| } |
| |
| static const MemoryListener vfio_prereg_listener = { |
| .name = "vfio-pre-reg", |
| .region_add = vfio_prereg_listener_region_add, |
| .region_del = vfio_prereg_listener_region_del, |
| }; |
| |
| static void vfio_host_win_add(VFIOSpaprContainer *scontainer, hwaddr min_iova, |
| hwaddr max_iova, uint64_t iova_pgsizes) |
| { |
| VFIOHostDMAWindow *hostwin; |
| |
| QLIST_FOREACH(hostwin, &scontainer->hostwin_list, hostwin_next) { |
| if (ranges_overlap(hostwin->min_iova, |
| hostwin->max_iova - hostwin->min_iova + 1, |
| min_iova, |
| max_iova - min_iova + 1)) { |
| hw_error("%s: Overlapped IOMMU are not enabled", __func__); |
| } |
| } |
| |
| hostwin = g_malloc0(sizeof(*hostwin)); |
| |
| hostwin->min_iova = min_iova; |
| hostwin->max_iova = max_iova; |
| hostwin->iova_pgsizes = iova_pgsizes; |
| QLIST_INSERT_HEAD(&scontainer->hostwin_list, hostwin, hostwin_next); |
| } |
| |
| static int vfio_host_win_del(VFIOSpaprContainer *scontainer, |
| hwaddr min_iova, hwaddr max_iova) |
| { |
| VFIOHostDMAWindow *hostwin; |
| |
| QLIST_FOREACH(hostwin, &scontainer->hostwin_list, hostwin_next) { |
| if (hostwin->min_iova == min_iova && hostwin->max_iova == max_iova) { |
| QLIST_REMOVE(hostwin, hostwin_next); |
| g_free(hostwin); |
| return 0; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static VFIOHostDMAWindow *vfio_find_hostwin(VFIOSpaprContainer *container, |
| hwaddr iova, hwaddr end) |
| { |
| VFIOHostDMAWindow *hostwin; |
| bool hostwin_found = false; |
| |
| QLIST_FOREACH(hostwin, &container->hostwin_list, hostwin_next) { |
| if (hostwin->min_iova <= iova && end <= hostwin->max_iova) { |
| hostwin_found = true; |
| break; |
| } |
| } |
| |
| return hostwin_found ? hostwin : NULL; |
| } |
| |
| static int vfio_spapr_remove_window(VFIOContainer *container, |
| hwaddr offset_within_address_space) |
| { |
| struct vfio_iommu_spapr_tce_remove remove = { |
| .argsz = sizeof(remove), |
| .start_addr = offset_within_address_space, |
| }; |
| int ret; |
| |
| ret = ioctl(container->fd, VFIO_IOMMU_SPAPR_TCE_REMOVE, &remove); |
| if (ret) { |
| error_report("Failed to remove window at %"PRIx64, |
| (uint64_t)remove.start_addr); |
| return -errno; |
| } |
| |
| trace_vfio_spapr_remove_window(offset_within_address_space); |
| |
| return 0; |
| } |
| |
| static int vfio_spapr_create_window(VFIOContainer *container, |
| MemoryRegionSection *section, |
| hwaddr *pgsize) |
| { |
| int ret = 0; |
| VFIOContainerBase *bcontainer = &container->bcontainer; |
| IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr); |
| uint64_t pagesize = memory_region_iommu_get_min_page_size(iommu_mr), pgmask; |
| unsigned entries, bits_total, bits_per_level, max_levels; |
| struct vfio_iommu_spapr_tce_create create = { .argsz = sizeof(create) }; |
| long rampagesize = qemu_minrampagesize(); |
| |
| /* |
| * The host might not support the guest supported IOMMU page size, |
| * so we will use smaller physical IOMMU pages to back them. |
| */ |
| if (pagesize > rampagesize) { |
| pagesize = rampagesize; |
| } |
| pgmask = bcontainer->pgsizes & (pagesize | (pagesize - 1)); |
| pagesize = pgmask ? (1ULL << (63 - clz64(pgmask))) : 0; |
| if (!pagesize) { |
| error_report("Host doesn't support page size 0x%"PRIx64 |
| ", the supported mask is 0x%lx", |
| memory_region_iommu_get_min_page_size(iommu_mr), |
| bcontainer->pgsizes); |
| return -EINVAL; |
| } |
| |
| /* |
| * FIXME: For VFIO iommu types which have KVM acceleration to |
| * avoid bouncing all map/unmaps through qemu this way, this |
| * would be the right place to wire that up (tell the KVM |
| * device emulation the VFIO iommu handles to use). |
| */ |
| create.window_size = int128_get64(section->size); |
| create.page_shift = ctz64(pagesize); |
| /* |
| * SPAPR host supports multilevel TCE tables. We try to guess optimal |
| * levels number and if this fails (for example due to the host memory |
| * fragmentation), we increase levels. The DMA address structure is: |
| * rrrrrrrr rxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx iiiiiiii |
| * where: |
| * r = reserved (bits >= 55 are reserved in the existing hardware) |
| * i = IOMMU page offset (64K in this example) |
| * x = bits to index a TCE which can be split to equal chunks to index |
| * within the level. |
| * The aim is to split "x" to smaller possible number of levels. |
| */ |
| entries = create.window_size >> create.page_shift; |
| /* bits_total is number of "x" needed */ |
| bits_total = ctz64(entries * sizeof(uint64_t)); |
| /* |
| * bits_per_level is a safe guess of how much we can allocate per level: |
| * 8 is the current minimum for CONFIG_FORCE_MAX_ZONEORDER and MAX_ORDER |
| * is usually bigger than that. |
| * Below we look at qemu_real_host_page_size as TCEs are allocated from |
| * system pages. |
| */ |
| bits_per_level = ctz64(qemu_real_host_page_size()) + 8; |
| create.levels = bits_total / bits_per_level; |
| if (bits_total % bits_per_level) { |
| ++create.levels; |
| } |
| max_levels = (64 - create.page_shift) / ctz64(qemu_real_host_page_size()); |
| for ( ; create.levels <= max_levels; ++create.levels) { |
| ret = ioctl(container->fd, VFIO_IOMMU_SPAPR_TCE_CREATE, &create); |
| if (!ret) { |
| break; |
| } |
| } |
| if (ret) { |
| error_report("Failed to create a window, ret = %d (%m)", ret); |
| return -errno; |
| } |
| |
| if (create.start_addr != section->offset_within_address_space) { |
| vfio_spapr_remove_window(container, create.start_addr); |
| |
| error_report("Host doesn't support DMA window at %"HWADDR_PRIx", must be %"PRIx64, |
| section->offset_within_address_space, |
| (uint64_t)create.start_addr); |
| return -EINVAL; |
| } |
| trace_vfio_spapr_create_window(create.page_shift, |
| create.levels, |
| create.window_size, |
| create.start_addr); |
| *pgsize = pagesize; |
| |
| return 0; |
| } |
| |
| static int |
| vfio_spapr_container_add_section_window(VFIOContainerBase *bcontainer, |
| MemoryRegionSection *section, |
| Error **errp) |
| { |
| VFIOContainer *container = container_of(bcontainer, VFIOContainer, |
| bcontainer); |
| VFIOSpaprContainer *scontainer = container_of(container, VFIOSpaprContainer, |
| container); |
| VFIOHostDMAWindow *hostwin; |
| hwaddr pgsize = 0; |
| int ret; |
| |
| /* |
| * VFIO_SPAPR_TCE_IOMMU supports a single host window between |
| * [dma32_window_start, dma32_window_size), we need to ensure |
| * the section fall in this range. |
| */ |
| if (container->iommu_type == VFIO_SPAPR_TCE_IOMMU) { |
| hwaddr iova, end; |
| |
| iova = section->offset_within_address_space; |
| end = iova + int128_get64(section->size) - 1; |
| |
| if (!vfio_find_hostwin(scontainer, iova, end)) { |
| error_setg(errp, "Container %p can't map guest IOVA region" |
| " 0x%"HWADDR_PRIx"..0x%"HWADDR_PRIx, container, |
| iova, end); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| if (container->iommu_type != VFIO_SPAPR_TCE_v2_IOMMU) { |
| return 0; |
| } |
| |
| /* For now intersections are not allowed, we may relax this later */ |
| QLIST_FOREACH(hostwin, &scontainer->hostwin_list, hostwin_next) { |
| if (ranges_overlap(hostwin->min_iova, |
| hostwin->max_iova - hostwin->min_iova + 1, |
| section->offset_within_address_space, |
| int128_get64(section->size))) { |
| error_setg(errp, |
| "region [0x%"PRIx64",0x%"PRIx64"] overlaps with existing" |
| "host DMA window [0x%"PRIx64",0x%"PRIx64"]", |
| section->offset_within_address_space, |
| section->offset_within_address_space + |
| int128_get64(section->size) - 1, |
| hostwin->min_iova, hostwin->max_iova); |
| return -EINVAL; |
| } |
| } |
| |
| ret = vfio_spapr_create_window(container, section, &pgsize); |
| if (ret) { |
| error_setg_errno(errp, -ret, "Failed to create SPAPR window"); |
| return ret; |
| } |
| |
| vfio_host_win_add(scontainer, section->offset_within_address_space, |
| section->offset_within_address_space + |
| int128_get64(section->size) - 1, pgsize); |
| #ifdef CONFIG_KVM |
| if (kvm_enabled()) { |
| VFIOGroup *group; |
| IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr); |
| struct kvm_vfio_spapr_tce param; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_VFIO_GROUP, |
| .attr = KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE, |
| .addr = (uint64_t)(unsigned long)¶m, |
| }; |
| |
| if (!memory_region_iommu_get_attr(iommu_mr, IOMMU_ATTR_SPAPR_TCE_FD, |
| ¶m.tablefd)) { |
| QLIST_FOREACH(group, &container->group_list, container_next) { |
| param.groupfd = group->fd; |
| if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) { |
| error_setg_errno(errp, errno, |
| "vfio: failed GROUP_SET_SPAPR_TCE for " |
| "KVM VFIO device %d and group fd %d", |
| param.tablefd, param.groupfd); |
| return -errno; |
| } |
| trace_vfio_spapr_group_attach(param.groupfd, param.tablefd); |
| } |
| } |
| } |
| #endif |
| return 0; |
| } |
| |
| static void |
| vfio_spapr_container_del_section_window(VFIOContainerBase *bcontainer, |
| MemoryRegionSection *section) |
| { |
| VFIOContainer *container = container_of(bcontainer, VFIOContainer, |
| bcontainer); |
| VFIOSpaprContainer *scontainer = container_of(container, VFIOSpaprContainer, |
| container); |
| |
| if (container->iommu_type != VFIO_SPAPR_TCE_v2_IOMMU) { |
| return; |
| } |
| |
| vfio_spapr_remove_window(container, |
| section->offset_within_address_space); |
| if (vfio_host_win_del(scontainer, |
| section->offset_within_address_space, |
| section->offset_within_address_space + |
| int128_get64(section->size) - 1) < 0) { |
| hw_error("%s: Cannot delete missing window at %"HWADDR_PRIx, |
| __func__, section->offset_within_address_space); |
| } |
| } |
| |
| static void vfio_spapr_container_release(VFIOContainerBase *bcontainer) |
| { |
| VFIOContainer *container = container_of(bcontainer, VFIOContainer, |
| bcontainer); |
| VFIOSpaprContainer *scontainer = container_of(container, VFIOSpaprContainer, |
| container); |
| VFIOHostDMAWindow *hostwin, *next; |
| |
| if (container->iommu_type == VFIO_SPAPR_TCE_v2_IOMMU) { |
| memory_listener_unregister(&scontainer->prereg_listener); |
| } |
| QLIST_FOREACH_SAFE(hostwin, &scontainer->hostwin_list, hostwin_next, |
| next) { |
| QLIST_REMOVE(hostwin, hostwin_next); |
| g_free(hostwin); |
| } |
| } |
| |
| static int vfio_spapr_container_setup(VFIOContainerBase *bcontainer, |
| Error **errp) |
| { |
| VFIOContainer *container = container_of(bcontainer, VFIOContainer, |
| bcontainer); |
| VFIOSpaprContainer *scontainer = container_of(container, VFIOSpaprContainer, |
| container); |
| struct vfio_iommu_spapr_tce_info info; |
| bool v2 = container->iommu_type == VFIO_SPAPR_TCE_v2_IOMMU; |
| int ret, fd = container->fd; |
| |
| QLIST_INIT(&scontainer->hostwin_list); |
| |
| /* |
| * The host kernel code implementing VFIO_IOMMU_DISABLE is called |
| * when container fd is closed so we do not call it explicitly |
| * in this file. |
| */ |
| if (!v2) { |
| ret = ioctl(fd, VFIO_IOMMU_ENABLE); |
| if (ret) { |
| error_setg_errno(errp, errno, "failed to enable container"); |
| return -errno; |
| } |
| } else { |
| scontainer->prereg_listener = vfio_prereg_listener; |
| |
| memory_listener_register(&scontainer->prereg_listener, |
| &address_space_memory); |
| if (bcontainer->error) { |
| ret = -1; |
| error_propagate_prepend(errp, bcontainer->error, |
| "RAM memory listener initialization failed: "); |
| goto listener_unregister_exit; |
| } |
| } |
| |
| info.argsz = sizeof(info); |
| ret = ioctl(fd, VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info); |
| if (ret) { |
| error_setg_errno(errp, errno, |
| "VFIO_IOMMU_SPAPR_TCE_GET_INFO failed"); |
| ret = -errno; |
| goto listener_unregister_exit; |
| } |
| |
| if (v2) { |
| bcontainer->pgsizes = info.ddw.pgsizes; |
| /* |
| * There is a default window in just created container. |
| * To make region_add/del simpler, we better remove this |
| * window now and let those iommu_listener callbacks |
| * create/remove them when needed. |
| */ |
| ret = vfio_spapr_remove_window(container, info.dma32_window_start); |
| if (ret) { |
| error_setg_errno(errp, -ret, |
| "failed to remove existing window"); |
| goto listener_unregister_exit; |
| } |
| } else { |
| /* The default table uses 4K pages */ |
| bcontainer->pgsizes = 0x1000; |
| vfio_host_win_add(scontainer, info.dma32_window_start, |
| info.dma32_window_start + |
| info.dma32_window_size - 1, |
| 0x1000); |
| } |
| |
| return 0; |
| |
| listener_unregister_exit: |
| if (v2) { |
| memory_listener_unregister(&scontainer->prereg_listener); |
| } |
| return ret; |
| } |
| |
| static void vfio_iommu_spapr_class_init(ObjectClass *klass, void *data) |
| { |
| VFIOIOMMUClass *vioc = VFIO_IOMMU_CLASS(klass); |
| |
| vioc->add_window = vfio_spapr_container_add_section_window; |
| vioc->del_window = vfio_spapr_container_del_section_window; |
| vioc->release = vfio_spapr_container_release; |
| vioc->setup = vfio_spapr_container_setup; |
| }; |
| |
| static const TypeInfo types[] = { |
| { |
| .name = TYPE_VFIO_IOMMU_SPAPR, |
| .parent = TYPE_VFIO_IOMMU_LEGACY, |
| .class_init = vfio_iommu_spapr_class_init, |
| }, |
| }; |
| |
| DEFINE_TYPES(types) |