| # Trace events for debugging and performance instrumentation |
| # |
| # This file is processed by the tracetool script during the build. |
| # |
| # To add a new trace event: |
| # |
| # 1. Choose a name for the trace event. Declare its arguments and format |
| # string. |
| # |
| # 2. Call the trace event from code using trace_##name, e.g. multiwrite_cb() -> |
| # trace_multiwrite_cb(). The source file must #include "trace.h". |
| # |
| # Format of a trace event: |
| # |
| # [disable] <name>(<type1> <arg1>[, <type2> <arg2>] ...) "<format-string>" |
| # |
| # Example: qemu_malloc(size_t size) "size %zu" |
| # |
| # The "disable" keyword will build without the trace event. |
| # In case of 'simple' trace backend, it will allow the trace event to be |
| # compiled, but this would be turned off by default. It can be toggled on via |
| # the monitor. |
| # |
| # The <name> must be a valid as a C function name. |
| # |
| # Types should be standard C types. Use void * for pointers because the trace |
| # system may not have the necessary headers included. |
| # |
| # The <format-string> should be a sprintf()-compatible format string. |
| |
| # qemu-malloc.c |
| disable qemu_malloc(size_t size, void *ptr) "size %zu ptr %p" |
| disable qemu_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p" |
| disable qemu_free(void *ptr) "ptr %p" |
| |
| # osdep.c |
| disable qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p" |
| disable qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p" |
| disable qemu_vfree(void *ptr) "ptr %p" |
| |
| # hw/virtio.c |
| disable virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u" |
| disable virtqueue_flush(void *vq, unsigned int count) "vq %p count %u" |
| disable virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u" |
| disable virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p" |
| disable virtio_irq(void *vq) "vq %p" |
| disable virtio_notify(void *vdev, void *vq) "vdev %p vq %p" |
| |
| # block.c |
| disable multiwrite_cb(void *mcb, int ret) "mcb %p ret %d" |
| disable bdrv_aio_multiwrite(void *mcb, int num_callbacks, int num_reqs) "mcb %p num_callbacks %d num_reqs %d" |
| disable bdrv_aio_multiwrite_earlyfail(void *mcb) "mcb %p" |
| disable bdrv_aio_multiwrite_latefail(void *mcb, int i) "mcb %p i %d" |
| disable bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p" |
| disable bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p" |
| |
| # hw/virtio-blk.c |
| disable virtio_blk_req_complete(void *req, int status) "req %p status %d" |
| disable virtio_blk_rw_complete(void *req, int ret) "req %p ret %d" |
| disable virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu" |
| |
| # posix-aio-compat.c |
| disable paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d" |
| |
| # ioport.c |
| disable cpu_in(unsigned int addr, unsigned int val) "addr %#x value %u" |
| disable cpu_out(unsigned int addr, unsigned int val) "addr %#x value %u" |
| |
| # balloon.c |
| # Since requests are raised via monitor, not many tracepoints are needed. |
| disable balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu" |
| |
| # hw/apic.c |
| disable apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d" |
| disable apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t polarity, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d polarity %d trigger_mode %d" |
| disable cpu_set_apic_base(uint64_t val) "%016"PRIx64"" |
| disable cpu_get_apic_base(uint64_t val) "%016"PRIx64"" |
| disable apic_mem_readl(uint64_t addr, uint32_t val) "%"PRIx64" = %08x" |
| disable apic_mem_writel(uint64_t addr, uint32_t val) "%"PRIx64" = %08x" |
| # coalescing |
| disable apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d" |
| disable apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d" |
| disable apic_set_irq(int apic_irq_delivered) "coalescing %d" |
| |
| # hw/cs4231.c |
| disable cs4231_mem_readl_dreg(uint32_t reg, uint32_t ret) "read dreg %d: 0x%02x" |
| disable cs4231_mem_readl_reg(uint32_t reg, uint32_t ret) "read reg %d: 0x%08x" |
| disable cs4231_mem_writel_reg(uint32_t reg, uint32_t old, uint32_t val) "write reg %d: 0x%08x -> 0x%08x" |
| disable cs4231_mem_writel_dreg(uint32_t reg, uint32_t old, uint32_t val) "write dreg %d: 0x%02x -> 0x%02x" |
| |
| # hw/eccmemctl.c |
| disable ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x" |
| disable ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x" |
| disable ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x" |
| disable ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x" |
| disable ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x" |
| disable ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x" |
| disable ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x" |
| disable ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x" |
| disable ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x" |
| disable ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x" |
| disable ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x" |
| disable ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x" |
| disable ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x" |
| disable ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x" |
| disable ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x" |
| disable ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x" |
| disable ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x" |
| disable ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x" |
| |
| # hw/lance.c |
| disable lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x" |
| disable lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x" |
| |
| # hw/slavio_intctl.c |
| disable slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = %x" |
| disable slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = %x" |
| disable slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask %x, curmask %x" |
| disable slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask %x, curmask %x" |
| disable slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = %x" |
| disable slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = %x" |
| disable slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask %x, curmask %x" |
| disable slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask %x, curmask %x" |
| disable slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d" |
| disable slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending %x disabled %x" |
| disable slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d" |
| disable slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d" |
| |
| # hw/slavio_misc.c |
| disable slavio_misc_update_irq_raise(void) "Raise IRQ" |
| disable slavio_misc_update_irq_lower(void) "Lower IRQ" |
| disable slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d" |
| disable slavio_cfg_mem_writeb(uint32_t val) "Write config %02x" |
| disable slavio_cfg_mem_readb(uint32_t ret) "Read config %02x" |
| disable slavio_diag_mem_writeb(uint32_t val) "Write diag %02x" |
| disable slavio_diag_mem_readb(uint32_t ret) "Read diag %02x" |
| disable slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x" |
| disable slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x" |
| disable slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x" |
| disable slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x" |
| disable slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x" |
| disable slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x" |
| disable apc_mem_writeb(uint32_t val) "Write power management %02x" |
| disable apc_mem_readb(uint32_t ret) "Read power management %02x" |
| disable slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x" |
| disable slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x" |
| disable slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x" |
| disable slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x" |
| |
| # hw/slavio_timer.c |
| disable slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x" |
| disable slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x" |
| disable slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64"" |
| disable slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x" |
| disable slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x" |
| disable slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64"" |
| disable slavio_timer_mem_writel_counter_invalid(void) "not user timer" |
| disable slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started" |
| disable slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped" |
| disable slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer" |
| disable slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter" |
| disable slavio_timer_mem_writel_mode_invalid(void) "not system timer" |
| disable slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64"" |
| |
| # hw/sparc32_dma.c |
| disable ledma_memory_read(uint64_t addr) "DMA read addr 0x%"PRIx64"" |
| disable ledma_memory_write(uint64_t addr) "DMA write addr 0x%"PRIx64"" |
| disable sparc32_dma_set_irq_raise(void) "Raise IRQ" |
| disable sparc32_dma_set_irq_lower(void) "Lower IRQ" |
| disable espdma_memory_read(uint32_t addr) "DMA read addr 0x%08x" |
| disable espdma_memory_write(uint32_t addr) "DMA write addr 0x%08x" |
| disable sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg %"PRIx64": 0x%08x" |
| disable sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg %"PRIx64": 0x%08x -> 0x%08x" |
| disable sparc32_dma_enable_raise(void) "Raise DMA enable" |
| disable sparc32_dma_enable_lower(void) "Lower DMA enable" |
| |
| # hw/sun4m.c |
| disable sun4m_cpu_interrupt(unsigned int level) "Set CPU IRQ %d" |
| disable sun4m_cpu_reset_interrupt(unsigned int level) "Reset CPU IRQ %d" |
| disable sun4m_cpu_set_irq_raise(int level) "Raise CPU IRQ %d" |
| disable sun4m_cpu_set_irq_lower(int level) "Lower CPU IRQ %d" |
| |
| # hw/sun4m_iommu.c |
| disable sun4m_iommu_mem_readl(uint64_t addr, uint32_t ret) "read reg[%"PRIx64"] = %x" |
| disable sun4m_iommu_mem_writel(uint64_t addr, uint32_t val) "write reg[%"PRIx64"] = %x" |
| disable sun4m_iommu_mem_writel_ctrl(uint64_t iostart) "iostart = %"PRIx64"" |
| disable sun4m_iommu_mem_writel_tlbflush(uint32_t val) "tlb flush %x" |
| disable sun4m_iommu_mem_writel_pgflush(uint32_t val) "page flush %x" |
| disable sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags addr %"PRIx64" => pte %"PRIx64", *pte = %x" |
| disable sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x" |
| disable sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64"" |
| |
| # vl.c |
| disable vm_state_notify(int running, int reason) "running %d reason %d" |
| |
| # block/qed-l2-cache.c |
| disable qed_alloc_l2_cache_entry(void *l2_cache, void *entry) "l2_cache %p entry %p" |
| disable qed_unref_l2_cache_entry(void *entry, int ref) "entry %p ref %d" |
| disable qed_find_l2_cache_entry(void *l2_cache, void *entry, uint64_t offset, int ref) "l2_cache %p entry %p offset %"PRIu64" ref %d" |
| |
| # block/qed-table.c |
| disable qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRIu64" table %p" |
| disable qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d" |
| disable qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u" |
| disable qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d" |
| |
| # block/qed.c |
| disable qed_aio_complete(void *s, void *acb, int ret) "s %p acb %p ret %d" |
| disable qed_aio_setup(void *s, void *acb, int64_t sector_num, int nb_sectors, void *opaque, int is_write) "s %p acb %p sector_num %"PRId64" nb_sectors %d opaque %p is_write %d" |
| disable qed_aio_next_io(void *s, void *acb, int ret, uint64_t cur_pos) "s %p acb %p ret %d cur_pos %"PRIu64"" |
| disable qed_aio_read_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" |
| disable qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" |
| disable qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64"" |
| disable qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64"" |
| disable qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu" |
