| /* |
| * QEMU live migration |
| * |
| * Copyright IBM, Corp. 2008 |
| * |
| * Authors: |
| * Anthony Liguori <aliguori@us.ibm.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/cutils.h" |
| #include "qemu/error-report.h" |
| #include "qemu/main-loop.h" |
| #include "migration/migration.h" |
| #include "migration/qemu-file.h" |
| #include "sysemu/sysemu.h" |
| #include "block/block.h" |
| #include "qapi/qmp/qerror.h" |
| #include "qapi/util.h" |
| #include "qemu/sockets.h" |
| #include "qemu/rcu.h" |
| #include "migration/block.h" |
| #include "migration/postcopy-ram.h" |
| #include "qemu/thread.h" |
| #include "qmp-commands.h" |
| #include "trace.h" |
| #include "qapi-event.h" |
| #include "qom/cpu.h" |
| #include "exec/memory.h" |
| #include "exec/address-spaces.h" |
| #include "io/channel-buffer.h" |
| #include "io/channel-tls.h" |
| #include "migration/colo.h" |
| |
| #define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */ |
| |
| /* Amount of time to allocate to each "chunk" of bandwidth-throttled |
| * data. */ |
| #define BUFFER_DELAY 100 |
| #define XFER_LIMIT_RATIO (1000 / BUFFER_DELAY) |
| |
| /* Time in milliseconds we are allowed to stop the source, |
| * for sending the last part */ |
| #define DEFAULT_MIGRATE_SET_DOWNTIME 300 |
| |
| /* Maximum migrate downtime set to 2000 seconds */ |
| #define MAX_MIGRATE_DOWNTIME_SECONDS 2000 |
| #define MAX_MIGRATE_DOWNTIME (MAX_MIGRATE_DOWNTIME_SECONDS * 1000) |
| |
| /* Default compression thread count */ |
| #define DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT 8 |
| /* Default decompression thread count, usually decompression is at |
| * least 4 times as fast as compression.*/ |
| #define DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT 2 |
| /*0: means nocompress, 1: best speed, ... 9: best compress ratio */ |
| #define DEFAULT_MIGRATE_COMPRESS_LEVEL 1 |
| /* Define default autoconverge cpu throttle migration parameters */ |
| #define DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL 20 |
| #define DEFAULT_MIGRATE_CPU_THROTTLE_INCREMENT 10 |
| |
| /* Migration XBZRLE default cache size */ |
| #define DEFAULT_MIGRATE_CACHE_SIZE (64 * 1024 * 1024) |
| |
| /* The delay time (in ms) between two COLO checkpoints |
| * Note: Please change this default value to 10000 when we support hybrid mode. |
| */ |
| #define DEFAULT_MIGRATE_X_CHECKPOINT_DELAY 200 |
| |
| static NotifierList migration_state_notifiers = |
| NOTIFIER_LIST_INITIALIZER(migration_state_notifiers); |
| |
| static bool deferred_incoming; |
| |
| /* |
| * Current state of incoming postcopy; note this is not part of |
| * MigrationIncomingState since it's state is used during cleanup |
| * at the end as MIS is being freed. |
| */ |
| static PostcopyState incoming_postcopy_state; |
| |
| /* When we add fault tolerance, we could have several |
| migrations at once. For now we don't need to add |
| dynamic creation of migration */ |
| |
| /* For outgoing */ |
| MigrationState *migrate_get_current(void) |
| { |
| static bool once; |
| static MigrationState current_migration = { |
| .state = MIGRATION_STATUS_NONE, |
| .xbzrle_cache_size = DEFAULT_MIGRATE_CACHE_SIZE, |
| .mbps = -1, |
| .parameters = { |
| .compress_level = DEFAULT_MIGRATE_COMPRESS_LEVEL, |
| .compress_threads = DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT, |
| .decompress_threads = DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT, |
| .cpu_throttle_initial = DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL, |
| .cpu_throttle_increment = DEFAULT_MIGRATE_CPU_THROTTLE_INCREMENT, |
| .max_bandwidth = MAX_THROTTLE, |
| .downtime_limit = DEFAULT_MIGRATE_SET_DOWNTIME, |
| .x_checkpoint_delay = DEFAULT_MIGRATE_X_CHECKPOINT_DELAY, |
| }, |
| }; |
| |
| if (!once) { |
| qemu_mutex_init(¤t_migration.src_page_req_mutex); |
| current_migration.parameters.tls_creds = g_strdup(""); |
| current_migration.parameters.tls_hostname = g_strdup(""); |
| once = true; |
| } |
| return ¤t_migration; |
| } |
| |
| MigrationIncomingState *migration_incoming_get_current(void) |
| { |
| static bool once; |
| static MigrationIncomingState mis_current; |
| |
| if (!once) { |
| mis_current.state = MIGRATION_STATUS_NONE; |
| memset(&mis_current, 0, sizeof(MigrationIncomingState)); |
| QLIST_INIT(&mis_current.loadvm_handlers); |
| qemu_mutex_init(&mis_current.rp_mutex); |
| qemu_event_init(&mis_current.main_thread_load_event, false); |
| once = true; |
| } |
| return &mis_current; |
| } |
| |
| void migration_incoming_state_destroy(void) |
| { |
| struct MigrationIncomingState *mis = migration_incoming_get_current(); |
| |
| qemu_event_destroy(&mis->main_thread_load_event); |
| loadvm_free_handlers(mis); |
| } |
| |
| |
| typedef struct { |
| bool optional; |
| uint32_t size; |
| uint8_t runstate[100]; |
| RunState state; |
| bool received; |
| } GlobalState; |
| |
| static GlobalState global_state; |
| |
| int global_state_store(void) |
| { |
| if (!runstate_store((char *)global_state.runstate, |
| sizeof(global_state.runstate))) { |
| error_report("runstate name too big: %s", global_state.runstate); |
| trace_migrate_state_too_big(); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| void global_state_store_running(void) |
| { |
| const char *state = RunState_lookup[RUN_STATE_RUNNING]; |
| strncpy((char *)global_state.runstate, |
| state, sizeof(global_state.runstate)); |
| } |
| |
| static bool global_state_received(void) |
| { |
| return global_state.received; |
| } |
| |
| static RunState global_state_get_runstate(void) |
| { |
| return global_state.state; |
| } |
| |
| void global_state_set_optional(void) |
| { |
| global_state.optional = true; |
| } |
| |
| static bool global_state_needed(void *opaque) |
| { |
| GlobalState *s = opaque; |
| char *runstate = (char *)s->runstate; |
| |
| /* If it is not optional, it is mandatory */ |
| |
| if (s->optional == false) { |
| return true; |
| } |
| |
| /* If state is running or paused, it is not needed */ |
| |
| if (strcmp(runstate, "running") == 0 || |
| strcmp(runstate, "paused") == 0) { |
| return false; |
| } |
| |
| /* for any other state it is needed */ |
| return true; |
| } |
| |
| static int global_state_post_load(void *opaque, int version_id) |
| { |
| GlobalState *s = opaque; |
| Error *local_err = NULL; |
| int r; |
| char *runstate = (char *)s->runstate; |
| |
| s->received = true; |
| trace_migrate_global_state_post_load(runstate); |
| |
| r = qapi_enum_parse(RunState_lookup, runstate, RUN_STATE__MAX, |
| -1, &local_err); |
| |
| if (r == -1) { |
| if (local_err) { |
| error_report_err(local_err); |
| } |
| return -EINVAL; |
| } |
| s->state = r; |
| |
| return 0; |
| } |
| |
| static void global_state_pre_save(void *opaque) |
| { |
| GlobalState *s = opaque; |
| |
| trace_migrate_global_state_pre_save((char *)s->runstate); |
| s->size = strlen((char *)s->runstate) + 1; |
| } |
| |
| static const VMStateDescription vmstate_globalstate = { |
| .name = "globalstate", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .post_load = global_state_post_load, |
| .pre_save = global_state_pre_save, |
| .needed = global_state_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(size, GlobalState), |
| VMSTATE_BUFFER(runstate, GlobalState), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| void register_global_state(void) |
| { |
| /* We would use it independently that we receive it */ |
| strcpy((char *)&global_state.runstate, ""); |
| global_state.received = false; |
| vmstate_register(NULL, 0, &vmstate_globalstate, &global_state); |
| } |
| |
| static void migrate_generate_event(int new_state) |
| { |
| if (migrate_use_events()) { |
| qapi_event_send_migration(new_state, &error_abort); |
| } |
| } |
| |
| /* |
| * Called on -incoming with a defer: uri. |
| * The migration can be started later after any parameters have been |
| * changed. |
| */ |
| static void deferred_incoming_migration(Error **errp) |
| { |
| if (deferred_incoming) { |
| error_setg(errp, "Incoming migration already deferred"); |
| } |
| deferred_incoming = true; |
| } |
| |
| /* Request a range of pages from the source VM at the given |
| * start address. |
| * rbname: Name of the RAMBlock to request the page in, if NULL it's the same |
| * as the last request (a name must have been given previously) |
| * Start: Address offset within the RB |
| * Len: Length in bytes required - must be a multiple of pagesize |
| */ |
| void migrate_send_rp_req_pages(MigrationIncomingState *mis, const char *rbname, |
| ram_addr_t start, size_t len) |
| { |
| uint8_t bufc[12 + 1 + 255]; /* start (8), len (4), rbname up to 256 */ |
| size_t msglen = 12; /* start + len */ |
| |
| *(uint64_t *)bufc = cpu_to_be64((uint64_t)start); |
| *(uint32_t *)(bufc + 8) = cpu_to_be32((uint32_t)len); |
| |
| if (rbname) { |
| int rbname_len = strlen(rbname); |
| assert(rbname_len < 256); |
| |
| bufc[msglen++] = rbname_len; |
| memcpy(bufc + msglen, rbname, rbname_len); |
| msglen += rbname_len; |
| migrate_send_rp_message(mis, MIG_RP_MSG_REQ_PAGES_ID, msglen, bufc); |
| } else { |
| migrate_send_rp_message(mis, MIG_RP_MSG_REQ_PAGES, msglen, bufc); |
| } |
| } |
| |
| void qemu_start_incoming_migration(const char *uri, Error **errp) |
| { |
| const char *p; |
| |
| qapi_event_send_migration(MIGRATION_STATUS_SETUP, &error_abort); |
| if (!strcmp(uri, "defer")) { |
| deferred_incoming_migration(errp); |
| } else if (strstart(uri, "tcp:", &p)) { |
| tcp_start_incoming_migration(p, errp); |
| #ifdef CONFIG_RDMA |
| } else if (strstart(uri, "rdma:", &p)) { |
| rdma_start_incoming_migration(p, errp); |
| #endif |
| } else if (strstart(uri, "exec:", &p)) { |
| exec_start_incoming_migration(p, errp); |
| } else if (strstart(uri, "unix:", &p)) { |
| unix_start_incoming_migration(p, errp); |
| } else if (strstart(uri, "fd:", &p)) { |
| fd_start_incoming_migration(p, errp); |
| } else { |
| error_setg(errp, "unknown migration protocol: %s", uri); |
| } |
| } |
| |
| static void process_incoming_migration_bh(void *opaque) |
| { |
| Error *local_err = NULL; |
| MigrationIncomingState *mis = opaque; |
| |
| /* Make sure all file formats flush their mutable metadata */ |
| bdrv_invalidate_cache_all(&local_err); |
| if (local_err) { |
| migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE, |
| MIGRATION_STATUS_FAILED); |
| error_report_err(local_err); |
| migrate_decompress_threads_join(); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* If we get an error here, just don't restart the VM yet. */ |
| blk_resume_after_migration(&local_err); |
| if (local_err) { |
| error_free(local_err); |
| local_err = NULL; |
| autostart = false; |
| } |
| |
| /* |
| * This must happen after all error conditions are dealt with and |
| * we're sure the VM is going to be running on this host. |
| */ |
| qemu_announce_self(); |
| |
| /* If global state section was not received or we are in running |
| state, we need to obey autostart. Any other state is set with |
| runstate_set. */ |
| |
| if (!global_state_received() || |
| global_state_get_runstate() == RUN_STATE_RUNNING) { |
| if (autostart) { |
| vm_start(); |
| } else { |
| runstate_set(RUN_STATE_PAUSED); |
| } |
| } else { |
| runstate_set(global_state_get_runstate()); |
| } |
| migrate_decompress_threads_join(); |
| /* |
| * This must happen after any state changes since as soon as an external |
| * observer sees this event they might start to prod at the VM assuming |
| * it's ready to use. |
| */ |
| migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE, |
| MIGRATION_STATUS_COMPLETED); |
| qemu_bh_delete(mis->bh); |
| migration_incoming_state_destroy(); |
| } |
| |
| static void process_incoming_migration_co(void *opaque) |
| { |
| QEMUFile *f = opaque; |
| MigrationIncomingState *mis = migration_incoming_get_current(); |
| PostcopyState ps; |
| int ret; |
| |
| mis->from_src_file = f; |
| mis->largest_page_size = qemu_ram_pagesize_largest(); |
| postcopy_state_set(POSTCOPY_INCOMING_NONE); |
| migrate_set_state(&mis->state, MIGRATION_STATUS_NONE, |
| MIGRATION_STATUS_ACTIVE); |
| ret = qemu_loadvm_state(f); |
| |
| ps = postcopy_state_get(); |
| trace_process_incoming_migration_co_end(ret, ps); |
| if (ps != POSTCOPY_INCOMING_NONE) { |
| if (ps == POSTCOPY_INCOMING_ADVISE) { |
| /* |
| * Where a migration had postcopy enabled (and thus went to advise) |
| * but managed to complete within the precopy period, we can use |
| * the normal exit. |
| */ |
| postcopy_ram_incoming_cleanup(mis); |
| } else if (ret >= 0) { |
| /* |
| * Postcopy was started, cleanup should happen at the end of the |
| * postcopy thread. |
| */ |
| trace_process_incoming_migration_co_postcopy_end_main(); |
| return; |
| } |
| /* Else if something went wrong then just fall out of the normal exit */ |
| } |
| |
| /* we get COLO info, and know if we are in COLO mode */ |
| if (!ret && migration_incoming_enable_colo()) { |
| mis->migration_incoming_co = qemu_coroutine_self(); |
| qemu_thread_create(&mis->colo_incoming_thread, "COLO incoming", |
| colo_process_incoming_thread, mis, QEMU_THREAD_JOINABLE); |
| mis->have_colo_incoming_thread = true; |
| qemu_coroutine_yield(); |
| |
| /* Wait checkpoint incoming thread exit before free resource */ |
| qemu_thread_join(&mis->colo_incoming_thread); |
| } |
| |
| qemu_fclose(f); |
| free_xbzrle_decoded_buf(); |
| |
| if (ret < 0) { |
| migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE, |
| MIGRATION_STATUS_FAILED); |
| error_report("load of migration failed: %s", strerror(-ret)); |
| migrate_decompress_threads_join(); |
| exit(EXIT_FAILURE); |
| } |
| |
| mis->bh = qemu_bh_new(process_incoming_migration_bh, mis); |
| qemu_bh_schedule(mis->bh); |
| } |
| |
| void migration_fd_process_incoming(QEMUFile *f) |
| { |
| Coroutine *co = qemu_coroutine_create(process_incoming_migration_co, f); |
| |
| migrate_decompress_threads_create(); |
| qemu_file_set_blocking(f, false); |
| qemu_coroutine_enter(co); |
| } |
| |
| |
| void migration_channel_process_incoming(MigrationState *s, |
| QIOChannel *ioc) |
| { |
| trace_migration_set_incoming_channel( |
| ioc, object_get_typename(OBJECT(ioc))); |
| |
| if (s->parameters.tls_creds && |
| *s->parameters.tls_creds && |
| !object_dynamic_cast(OBJECT(ioc), |
| TYPE_QIO_CHANNEL_TLS)) { |
| Error *local_err = NULL; |
| migration_tls_channel_process_incoming(s, ioc, &local_err); |
| if (local_err) { |
| error_report_err(local_err); |
| } |
| } else { |
| QEMUFile *f = qemu_fopen_channel_input(ioc); |
| migration_fd_process_incoming(f); |
| } |
| } |
| |
| |
| void migration_channel_connect(MigrationState *s, |
| QIOChannel *ioc, |
| const char *hostname) |
| { |
| trace_migration_set_outgoing_channel( |
| ioc, object_get_typename(OBJECT(ioc)), hostname); |
| |
| if (s->parameters.tls_creds && |
| *s->parameters.tls_creds && |
| !object_dynamic_cast(OBJECT(ioc), |
| TYPE_QIO_CHANNEL_TLS)) { |
| Error *local_err = NULL; |
| migration_tls_channel_connect(s, ioc, hostname, &local_err); |
| if (local_err) { |
| migrate_fd_error(s, local_err); |
| error_free(local_err); |
| } |
| } else { |
| QEMUFile *f = qemu_fopen_channel_output(ioc); |
| |
| s->to_dst_file = f; |
| |
| migrate_fd_connect(s); |
| } |
| } |
| |
| |
| /* |
| * Send a message on the return channel back to the source |
| * of the migration. |
| */ |
| void migrate_send_rp_message(MigrationIncomingState *mis, |
| enum mig_rp_message_type message_type, |
| uint16_t len, void *data) |
| { |
| trace_migrate_send_rp_message((int)message_type, len); |
| qemu_mutex_lock(&mis->rp_mutex); |
| qemu_put_be16(mis->to_src_file, (unsigned int)message_type); |
| qemu_put_be16(mis->to_src_file, len); |
| qemu_put_buffer(mis->to_src_file, data, len); |
| qemu_fflush(mis->to_src_file); |
| qemu_mutex_unlock(&mis->rp_mutex); |
| } |
| |
| /* |
| * Send a 'SHUT' message on the return channel with the given value |
| * to indicate that we've finished with the RP. Non-0 value indicates |
| * error. |
| */ |
| void migrate_send_rp_shut(MigrationIncomingState *mis, |
| uint32_t value) |
| { |
| uint32_t buf; |
| |
| buf = cpu_to_be32(value); |
| migrate_send_rp_message(mis, MIG_RP_MSG_SHUT, sizeof(buf), &buf); |
| } |
| |
| /* |
| * Send a 'PONG' message on the return channel with the given value |
| * (normally in response to a 'PING') |
| */ |
| void migrate_send_rp_pong(MigrationIncomingState *mis, |
| uint32_t value) |
| { |
| uint32_t buf; |
| |
| buf = cpu_to_be32(value); |
| migrate_send_rp_message(mis, MIG_RP_MSG_PONG, sizeof(buf), &buf); |
| } |
| |
| MigrationCapabilityStatusList *qmp_query_migrate_capabilities(Error **errp) |
| { |
| MigrationCapabilityStatusList *head = NULL; |
| MigrationCapabilityStatusList *caps; |
| MigrationState *s = migrate_get_current(); |
| int i; |
| |
| caps = NULL; /* silence compiler warning */ |
| for (i = 0; i < MIGRATION_CAPABILITY__MAX; i++) { |
| if (i == MIGRATION_CAPABILITY_X_COLO && !colo_supported()) { |
| continue; |
| } |
| if (head == NULL) { |
| head = g_malloc0(sizeof(*caps)); |
| caps = head; |
| } else { |
| caps->next = g_malloc0(sizeof(*caps)); |
| caps = caps->next; |
| } |
| caps->value = |
| g_malloc(sizeof(*caps->value)); |
| caps->value->capability = i; |
| caps->value->state = s->enabled_capabilities[i]; |
| } |
| |
| return head; |
| } |
| |
| MigrationParameters *qmp_query_migrate_parameters(Error **errp) |
| { |
| MigrationParameters *params; |
| MigrationState *s = migrate_get_current(); |
| |
| params = g_malloc0(sizeof(*params)); |
| params->has_compress_level = true; |
| params->compress_level = s->parameters.compress_level; |
| params->has_compress_threads = true; |
| params->compress_threads = s->parameters.compress_threads; |
| params->has_decompress_threads = true; |
| params->decompress_threads = s->parameters.decompress_threads; |
| params->has_cpu_throttle_initial = true; |
| params->cpu_throttle_initial = s->parameters.cpu_throttle_initial; |
| params->has_cpu_throttle_increment = true; |
| params->cpu_throttle_increment = s->parameters.cpu_throttle_increment; |
| params->has_tls_creds = !!s->parameters.tls_creds; |
| params->tls_creds = g_strdup(s->parameters.tls_creds); |
| params->has_tls_hostname = !!s->parameters.tls_hostname; |
| params->tls_hostname = g_strdup(s->parameters.tls_hostname); |
| params->has_max_bandwidth = true; |
| params->max_bandwidth = s->parameters.max_bandwidth; |
| params->has_downtime_limit = true; |
| params->downtime_limit = s->parameters.downtime_limit; |
| params->has_x_checkpoint_delay = true; |
| params->x_checkpoint_delay = s->parameters.x_checkpoint_delay; |
| |
| return params; |
| } |
| |
| /* |
| * Return true if we're already in the middle of a migration |
| * (i.e. any of the active or setup states) |
| */ |
| static bool migration_is_setup_or_active(int state) |
| { |
| switch (state) { |
| case MIGRATION_STATUS_ACTIVE: |
| case MIGRATION_STATUS_POSTCOPY_ACTIVE: |
| case MIGRATION_STATUS_SETUP: |
| return true; |
| |
| default: |
| return false; |
| |
| } |
| } |
| |
| static void get_xbzrle_cache_stats(MigrationInfo *info) |
| { |
| if (migrate_use_xbzrle()) { |
| info->has_xbzrle_cache = true; |
| info->xbzrle_cache = g_malloc0(sizeof(*info->xbzrle_cache)); |
| info->xbzrle_cache->cache_size = migrate_xbzrle_cache_size(); |
| info->xbzrle_cache->bytes = xbzrle_mig_bytes_transferred(); |
| info->xbzrle_cache->pages = xbzrle_mig_pages_transferred(); |
| info->xbzrle_cache->cache_miss = xbzrle_mig_pages_cache_miss(); |
| info->xbzrle_cache->cache_miss_rate = xbzrle_mig_cache_miss_rate(); |
| info->xbzrle_cache->overflow = xbzrle_mig_pages_overflow(); |
| } |
| } |
| |
| static void populate_ram_info(MigrationInfo *info, MigrationState *s) |
| { |
| info->has_ram = true; |
| info->ram = g_malloc0(sizeof(*info->ram)); |
| info->ram->transferred = ram_bytes_transferred(); |
| info->ram->total = ram_bytes_total(); |
| info->ram->duplicate = dup_mig_pages_transferred(); |
| info->ram->skipped = skipped_mig_pages_transferred(); |
| info->ram->normal = norm_mig_pages_transferred(); |
| info->ram->normal_bytes = norm_mig_bytes_transferred(); |
| info->ram->mbps = s->mbps; |
| info->ram->dirty_sync_count = s->dirty_sync_count; |
| info->ram->postcopy_requests = s->postcopy_requests; |
| |
| if (s->state != MIGRATION_STATUS_COMPLETED) { |
| info->ram->remaining = ram_bytes_remaining(); |
| info->ram->dirty_pages_rate = s->dirty_pages_rate; |
| } |
| } |
| |
| MigrationInfo *qmp_query_migrate(Error **errp) |
| { |
| MigrationInfo *info = g_malloc0(sizeof(*info)); |
| MigrationState *s = migrate_get_current(); |
| |
| switch (s->state) { |
| case MIGRATION_STATUS_NONE: |
| /* no migration has happened ever */ |
| break; |
| case MIGRATION_STATUS_SETUP: |
| info->has_status = true; |
| info->has_total_time = false; |
| break; |
| case MIGRATION_STATUS_ACTIVE: |
| case MIGRATION_STATUS_CANCELLING: |
| info->has_status = true; |
| info->has_total_time = true; |
| info->total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) |
| - s->total_time; |
| info->has_expected_downtime = true; |
| info->expected_downtime = s->expected_downtime; |
| info->has_setup_time = true; |
| info->setup_time = s->setup_time; |
| |
| populate_ram_info(info, s); |
| |
| if (blk_mig_active()) { |
| info->has_disk = true; |
| info->disk = g_malloc0(sizeof(*info->disk)); |
| info->disk->transferred = blk_mig_bytes_transferred(); |
| info->disk->remaining = blk_mig_bytes_remaining(); |
| info->disk->total = blk_mig_bytes_total(); |
| } |
| |
| if (cpu_throttle_active()) { |
| info->has_cpu_throttle_percentage = true; |
| info->cpu_throttle_percentage = cpu_throttle_get_percentage(); |
| } |
| |
| get_xbzrle_cache_stats(info); |
| break; |
| case MIGRATION_STATUS_POSTCOPY_ACTIVE: |
| /* Mostly the same as active; TODO add some postcopy stats */ |
| info->has_status = true; |
| info->has_total_time = true; |
| info->total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) |
| - s->total_time; |
| info->has_expected_downtime = true; |
| info->expected_downtime = s->expected_downtime; |
| info->has_setup_time = true; |
| info->setup_time = s->setup_time; |
| |
| populate_ram_info(info, s); |
| |
| if (blk_mig_active()) { |
| info->has_disk = true; |
| info->disk = g_malloc0(sizeof(*info->disk)); |
| info->disk->transferred = blk_mig_bytes_transferred(); |
| info->disk->remaining = blk_mig_bytes_remaining(); |
| info->disk->total = blk_mig_bytes_total(); |
| } |
| |
| get_xbzrle_cache_stats(info); |
| break; |
| case MIGRATION_STATUS_COLO: |
| info->has_status = true; |
| /* TODO: display COLO specific information (checkpoint info etc.) */ |
| break; |
| case MIGRATION_STATUS_COMPLETED: |
| get_xbzrle_cache_stats(info); |
| |
| info->has_status = true; |
| info->has_total_time = true; |
| info->total_time = s->total_time; |
| info->has_downtime = true; |
| info->downtime = s->downtime; |
| info->has_setup_time = true; |
| info->setup_time = s->setup_time; |
| |
| populate_ram_info(info, s); |
| break; |
| case MIGRATION_STATUS_FAILED: |
| info->has_status = true; |
| if (s->error) { |
| info->has_error_desc = true; |
| info->error_desc = g_strdup(error_get_pretty(s->error)); |
| } |
| break; |
| case MIGRATION_STATUS_CANCELLED: |
| info->has_status = true; |
| break; |
| } |
| info->status = s->state; |
| |
| return info; |
| } |
| |
| void qmp_migrate_set_capabilities(MigrationCapabilityStatusList *params, |
| Error **errp) |
| { |
| MigrationState *s = migrate_get_current(); |
| MigrationCapabilityStatusList *cap; |
| bool old_postcopy_cap = migrate_postcopy_ram(); |
| |
| if (migration_is_setup_or_active(s->state)) { |
| error_setg(errp, QERR_MIGRATION_ACTIVE); |
| return; |
| } |
| |
| for (cap = params; cap; cap = cap->next) { |
| if (cap->value->capability == MIGRATION_CAPABILITY_X_COLO) { |
| if (!colo_supported()) { |
| error_setg(errp, "COLO is not currently supported, please" |
| " configure with --enable-colo option in order to" |
| " support COLO feature"); |
| continue; |
| } |
| } |
| s->enabled_capabilities[cap->value->capability] = cap->value->state; |
| } |
| |
| if (migrate_postcopy_ram()) { |
| if (migrate_use_compression()) { |
| /* The decompression threads asynchronously write into RAM |
| * rather than use the atomic copies needed to avoid |
| * userfaulting. It should be possible to fix the decompression |
| * threads for compatibility in future. |
| */ |
| error_report("Postcopy is not currently compatible with " |
| "compression"); |
| s->enabled_capabilities[MIGRATION_CAPABILITY_POSTCOPY_RAM] = |
| false; |
| } |
| /* This check is reasonably expensive, so only when it's being |
| * set the first time, also it's only the destination that needs |
| * special support. |
| */ |
| if (!old_postcopy_cap && runstate_check(RUN_STATE_INMIGRATE) && |
| !postcopy_ram_supported_by_host()) { |
| /* postcopy_ram_supported_by_host will have emitted a more |
| * detailed message |
| */ |
| error_report("Postcopy is not supported"); |
| s->enabled_capabilities[MIGRATION_CAPABILITY_POSTCOPY_RAM] = |
| false; |
| } |
| } |
| } |
| |
| void qmp_migrate_set_parameters(MigrationParameters *params, Error **errp) |
| { |
| MigrationState *s = migrate_get_current(); |
| |
| if (params->has_compress_level && |
| (params->compress_level < 0 || params->compress_level > 9)) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "compress_level", |
| "is invalid, it should be in the range of 0 to 9"); |
| return; |
| } |
| if (params->has_compress_threads && |
| (params->compress_threads < 1 || params->compress_threads > 255)) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, |
| "compress_threads", |
| "is invalid, it should be in the range of 1 to 255"); |
| return; |
| } |
| if (params->has_decompress_threads && |
| (params->decompress_threads < 1 || params->decompress_threads > 255)) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, |
| "decompress_threads", |
| "is invalid, it should be in the range of 1 to 255"); |
| return; |
| } |
| if (params->has_cpu_throttle_initial && |
| (params->cpu_throttle_initial < 1 || |
| params->cpu_throttle_initial > 99)) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, |
| "cpu_throttle_initial", |
| "an integer in the range of 1 to 99"); |
| return; |
| } |
| if (params->has_cpu_throttle_increment && |
| (params->cpu_throttle_increment < 1 || |
| params->cpu_throttle_increment > 99)) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, |
| "cpu_throttle_increment", |
| "an integer in the range of 1 to 99"); |
| return; |
| } |
| if (params->has_max_bandwidth && |
| (params->max_bandwidth < 0 || params->max_bandwidth > SIZE_MAX)) { |
| error_setg(errp, "Parameter 'max_bandwidth' expects an integer in the" |
| " range of 0 to %zu bytes/second", SIZE_MAX); |
| return; |
| } |
| if (params->has_downtime_limit && |
| (params->downtime_limit < 0 || |
| params->downtime_limit > MAX_MIGRATE_DOWNTIME)) { |
| error_setg(errp, "Parameter 'downtime_limit' expects an integer in " |
| "the range of 0 to %d milliseconds", |
| MAX_MIGRATE_DOWNTIME); |
| return; |
| } |
| if (params->has_x_checkpoint_delay && (params->x_checkpoint_delay < 0)) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, |
| "x_checkpoint_delay", |
| "is invalid, it should be positive"); |
| } |
| |
| if (params->has_compress_level) { |
| s->parameters.compress_level = params->compress_level; |
| } |
| if (params->has_compress_threads) { |
| s->parameters.compress_threads = params->compress_threads; |
| } |
| if (params->has_decompress_threads) { |
| s->parameters.decompress_threads = params->decompress_threads; |
| } |
| if (params->has_cpu_throttle_initial) { |
| s->parameters.cpu_throttle_initial = params->cpu_throttle_initial; |
| } |
| if (params->has_cpu_throttle_increment) { |
| s->parameters.cpu_throttle_increment = params->cpu_throttle_increment; |
| } |
| if (params->has_tls_creds) { |
| g_free(s->parameters.tls_creds); |
| s->parameters.tls_creds = g_strdup(params->tls_creds); |
| } |
| if (params->has_tls_hostname) { |
| g_free(s->parameters.tls_hostname); |
| s->parameters.tls_hostname = g_strdup(params->tls_hostname); |
| } |
| if (params->has_max_bandwidth) { |
| s->parameters.max_bandwidth = params->max_bandwidth; |
| if (s->to_dst_file) { |
| qemu_file_set_rate_limit(s->to_dst_file, |
| s->parameters.max_bandwidth / XFER_LIMIT_RATIO); |
| } |
| } |
| if (params->has_downtime_limit) { |
| s->parameters.downtime_limit = params->downtime_limit; |
| } |
| |
| if (params->has_x_checkpoint_delay) { |
| s->parameters.x_checkpoint_delay = params->x_checkpoint_delay; |
| if (migration_in_colo_state()) { |
| colo_checkpoint_notify(s); |
| } |
| } |
| } |
| |
| |
| void qmp_migrate_start_postcopy(Error **errp) |
| { |
| MigrationState *s = migrate_get_current(); |
| |
| if (!migrate_postcopy_ram()) { |
| error_setg(errp, "Enable postcopy with migrate_set_capability before" |
| " the start of migration"); |
| return; |
| } |
| |
| if (s->state == MIGRATION_STATUS_NONE) { |
| error_setg(errp, "Postcopy must be started after migration has been" |
| " started"); |
| return; |
| } |
| /* |
| * we don't error if migration has finished since that would be racy |
| * with issuing this command. |
| */ |
| atomic_set(&s->start_postcopy, true); |
| } |
| |
| /* shared migration helpers */ |
| |
| void migrate_set_state(int *state, int old_state, int new_state) |
| { |
| if (atomic_cmpxchg(state, old_state, new_state) == old_state) { |
| trace_migrate_set_state(new_state); |
| migrate_generate_event(new_state); |
| } |
| } |
| |
| static void migrate_fd_cleanup(void *opaque) |
| { |
| MigrationState *s = opaque; |
| |
| qemu_bh_delete(s->cleanup_bh); |
| s->cleanup_bh = NULL; |
| |
| flush_page_queue(s); |
| |
| if (s->to_dst_file) { |
| trace_migrate_fd_cleanup(); |
| qemu_mutex_unlock_iothread(); |
| if (s->migration_thread_running) { |
| qemu_thread_join(&s->thread); |
| s->migration_thread_running = false; |
| } |
| qemu_mutex_lock_iothread(); |
| |
| migrate_compress_threads_join(); |
| qemu_fclose(s->to_dst_file); |
| s->to_dst_file = NULL; |
| } |
| |
| assert((s->state != MIGRATION_STATUS_ACTIVE) && |
| (s->state != MIGRATION_STATUS_POSTCOPY_ACTIVE)); |
| |
| if (s->state == MIGRATION_STATUS_CANCELLING) { |
| migrate_set_state(&s->state, MIGRATION_STATUS_CANCELLING, |
| MIGRATION_STATUS_CANCELLED); |
| } |
| |
| notifier_list_notify(&migration_state_notifiers, s); |
| } |
| |
| void migrate_fd_error(MigrationState *s, const Error *error) |
| { |
| trace_migrate_fd_error(error_get_pretty(error)); |
| assert(s->to_dst_file == NULL); |
| migrate_set_state(&s->state, MIGRATION_STATUS_SETUP, |
| MIGRATION_STATUS_FAILED); |
| if (!s->error) { |
| s->error = error_copy(error); |
| } |
| notifier_list_notify(&migration_state_notifiers, s); |
| } |
| |
| static void migrate_fd_cancel(MigrationState *s) |
| { |
| int old_state ; |
| QEMUFile *f = migrate_get_current()->to_dst_file; |
| trace_migrate_fd_cancel(); |
| |
| if (s->rp_state.from_dst_file) { |
| /* shutdown the rp socket, so causing the rp thread to shutdown */ |
| qemu_file_shutdown(s->rp_state.from_dst_file); |
| } |
| |
| do { |
| old_state = s->state; |
| if (!migration_is_setup_or_active(old_state)) { |
| break; |
| } |
| migrate_set_state(&s->state, old_state, MIGRATION_STATUS_CANCELLING); |
| } while (s->state != MIGRATION_STATUS_CANCELLING); |
| |
| /* |
| * If we're unlucky the migration code might be stuck somewhere in a |
| * send/write while the network has failed and is waiting to timeout; |
| * if we've got shutdown(2) available then we can force it to quit. |
| * The outgoing qemu file gets closed in migrate_fd_cleanup that is |
| * called in a bh, so there is no race against this cancel. |
| */ |
| if (s->state == MIGRATION_STATUS_CANCELLING && f) { |
| qemu_file_shutdown(f); |
| } |
| if (s->state == MIGRATION_STATUS_CANCELLING && s->block_inactive) { |
| Error *local_err = NULL; |
| |
| bdrv_invalidate_cache_all(&local_err); |
| if (local_err) { |
| error_report_err(local_err); |
| } else { |
| s->block_inactive = false; |
| } |
| } |
| } |
| |
| void add_migration_state_change_notifier(Notifier *notify) |
| { |
| notifier_list_add(&migration_state_notifiers, notify); |
| } |
| |
| void remove_migration_state_change_notifier(Notifier *notify) |
| { |
| notifier_remove(notify); |
| } |
| |
| bool migration_in_setup(MigrationState *s) |
| { |
| return s->state == MIGRATION_STATUS_SETUP; |
| } |
| |
| bool migration_has_finished(MigrationState *s) |
| { |
| return s->state == MIGRATION_STATUS_COMPLETED; |
| } |
| |
| bool migration_has_failed(MigrationState *s) |
| { |
| return (s->state == MIGRATION_STATUS_CANCELLED || |
| s->state == MIGRATION_STATUS_FAILED); |
| } |
| |
| bool migration_in_postcopy(MigrationState *s) |
| { |
| return (s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE); |
| } |
| |
| bool migration_in_postcopy_after_devices(MigrationState *s) |
| { |
| return migration_in_postcopy(s) && s->postcopy_after_devices; |
| } |
| |
| bool migration_is_idle(MigrationState *s) |
| { |
| if (!s) { |
| s = migrate_get_current(); |
| } |
| |
| switch (s->state) { |
| case MIGRATION_STATUS_NONE: |
| case MIGRATION_STATUS_CANCELLED: |
| case MIGRATION_STATUS_COMPLETED: |
| case MIGRATION_STATUS_FAILED: |
| return true; |
| case MIGRATION_STATUS_SETUP: |
| case MIGRATION_STATUS_CANCELLING: |
| case MIGRATION_STATUS_ACTIVE: |
| case MIGRATION_STATUS_POSTCOPY_ACTIVE: |
| case MIGRATION_STATUS_COLO: |
| return false; |
| case MIGRATION_STATUS__MAX: |
| g_assert_not_reached(); |
| } |
| |
| return false; |
| } |
| |
| MigrationState *migrate_init(const MigrationParams *params) |
| { |
| MigrationState *s = migrate_get_current(); |
| |
| /* |
| * Reinitialise all migration state, except |
| * parameters/capabilities that the user set, and |
| * locks. |
| */ |
| s->bytes_xfer = 0; |
| s->xfer_limit = 0; |
| s->cleanup_bh = 0; |
| s->to_dst_file = NULL; |
| s->state = MIGRATION_STATUS_NONE; |
| s->params = *params; |
| s->rp_state.from_dst_file = NULL; |
| s->rp_state.error = false; |
| s->mbps = 0.0; |
| s->downtime = 0; |
| s->expected_downtime = 0; |
| s->dirty_pages_rate = 0; |
| s->dirty_bytes_rate = 0; |
| s->setup_time = 0; |
| s->dirty_sync_count = 0; |
| s->start_postcopy = false; |
| s->postcopy_after_devices = false; |
| s->postcopy_requests = 0; |
| s->migration_thread_running = false; |
| s->last_req_rb = NULL; |
| error_free(s->error); |
| s->error = NULL; |
| |
| migrate_set_state(&s->state, MIGRATION_STATUS_NONE, MIGRATION_STATUS_SETUP); |
| |
| QSIMPLEQ_INIT(&s->src_page_requests); |
| |
| s->total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); |
| return s; |
| } |
| |
| static GSList *migration_blockers; |
| |
| int migrate_add_blocker(Error *reason, Error **errp) |
| { |
| if (only_migratable) { |
| error_propagate(errp, error_copy(reason)); |
| error_prepend(errp, "disallowing migration blocker " |
| "(--only_migratable) for: "); |
| return -EACCES; |
| } |
| |
| if (migration_is_idle(NULL)) { |
| migration_blockers = g_slist_prepend(migration_blockers, reason); |
| return 0; |
| } |
| |
| error_propagate(errp, error_copy(reason)); |
| error_prepend(errp, "disallowing migration blocker (migration in " |
| "progress) for: "); |
| return -EBUSY; |
| } |
| |
| void migrate_del_blocker(Error *reason) |
| { |
| migration_blockers = g_slist_remove(migration_blockers, reason); |
| } |
| |
| int check_migratable(Object *obj, Error **err) |
| { |
| DeviceClass *dc = DEVICE_GET_CLASS(obj); |
| if (only_migratable && dc->vmsd) { |
| if (dc->vmsd->unmigratable) { |
| error_setg(err, "Device %s is not migratable, but " |
| "--only-migratable was specified", |
| object_get_typename(obj)); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| void qmp_migrate_incoming(const char *uri, Error **errp) |
| { |
| Error *local_err = NULL; |
| static bool once = true; |
| |
| if (!deferred_incoming) { |
| error_setg(errp, "For use with '-incoming defer'"); |
| return; |
| } |
| if (!once) { |
| error_setg(errp, "The incoming migration has already been started"); |
| } |
| |
| qemu_start_incoming_migration(uri, &local_err); |
| |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| once = false; |
| } |
| |
| bool migration_is_blocked(Error **errp) |
| { |
| if (qemu_savevm_state_blocked(errp)) { |
| return true; |
| } |
| |
| if (migration_blockers) { |
| *errp = error_copy(migration_blockers->data); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void qmp_migrate(const char *uri, bool has_blk, bool blk, |
| bool has_inc, bool inc, bool has_detach, bool detach, |
| Error **errp) |
| { |
| Error *local_err = NULL; |
| MigrationState *s = migrate_get_current(); |
| MigrationParams params; |
| const char *p; |
| |
| params.blk = has_blk && blk; |
| params.shared = has_inc && inc; |
| |
| if (migration_is_setup_or_active(s->state) || |
| s->state == MIGRATION_STATUS_CANCELLING || |
| s->state == MIGRATION_STATUS_COLO) { |
| error_setg(errp, QERR_MIGRATION_ACTIVE); |
| return; |
| } |
| if (runstate_check(RUN_STATE_INMIGRATE)) { |
| error_setg(errp, "Guest is waiting for an incoming migration"); |
| return; |
| } |
| |
| if (migration_is_blocked(errp)) { |
| return; |
| } |
| |
| s = migrate_init(¶ms); |
| |
| if (strstart(uri, "tcp:", &p)) { |
| tcp_start_outgoing_migration(s, p, &local_err); |
| #ifdef CONFIG_RDMA |
| } else if (strstart(uri, "rdma:", &p)) { |
| rdma_start_outgoing_migration(s, p, &local_err); |
| #endif |
| } else if (strstart(uri, "exec:", &p)) { |
| exec_start_outgoing_migration(s, p, &local_err); |
| } else if (strstart(uri, "unix:", &p)) { |
| unix_start_outgoing_migration(s, p, &local_err); |
| } else if (strstart(uri, "fd:", &p)) { |
| fd_start_outgoing_migration(s, p, &local_err); |
| } else { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "uri", |
| "a valid migration protocol"); |
| migrate_set_state(&s->state, MIGRATION_STATUS_SETUP, |
| MIGRATION_STATUS_FAILED); |
| return; |
| } |
| |
| if (local_err) { |
| migrate_fd_error(s, local_err); |
| error_propagate(errp, local_err); |
| return; |
| } |
| } |
| |
| void qmp_migrate_cancel(Error **errp) |
| { |
| migrate_fd_cancel(migrate_get_current()); |
| } |
| |
| void qmp_migrate_set_cache_size(int64_t value, Error **errp) |
| { |
| MigrationState *s = migrate_get_current(); |
| int64_t new_size; |
| |
| /* Check for truncation */ |
| if (value != (size_t)value) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "cache size", |
| "exceeding address space"); |
| return; |
| } |
| |
| /* Cache should not be larger than guest ram size */ |
| if (value > ram_bytes_total()) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "cache size", |
| "exceeds guest ram size "); |
| return; |
| } |
| |
| new_size = xbzrle_cache_resize(value); |
| if (new_size < 0) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "cache size", |
| "is smaller than page size"); |
| return; |
| } |
| |
| s->xbzrle_cache_size = new_size; |
| } |
| |
| int64_t qmp_query_migrate_cache_size(Error **errp) |
| { |
| return migrate_xbzrle_cache_size(); |
| } |
| |
| void qmp_migrate_set_speed(int64_t value, Error **errp) |
| { |
| MigrationParameters p = { |
| .has_max_bandwidth = true, |
| .max_bandwidth = value, |
| }; |
| |
| qmp_migrate_set_parameters(&p, errp); |
| } |
| |
| void qmp_migrate_set_downtime(double value, Error **errp) |
| { |
| if (value < 0 || value > MAX_MIGRATE_DOWNTIME_SECONDS) { |
| error_setg(errp, "Parameter 'downtime_limit' expects an integer in " |
| "the range of 0 to %d seconds", |
| MAX_MIGRATE_DOWNTIME_SECONDS); |
| return; |
| } |
| |
| value *= 1000; /* Convert to milliseconds */ |
| value = MAX(0, MIN(INT64_MAX, value)); |
| |
| MigrationParameters p = { |
| .has_downtime_limit = true, |
| .downtime_limit = value, |
| }; |
| |
| qmp_migrate_set_parameters(&p, errp); |
| } |
| |
| bool migrate_release_ram(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_RELEASE_RAM]; |
| } |
| |
| bool migrate_postcopy_ram(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_POSTCOPY_RAM]; |
| } |
| |
| bool migrate_auto_converge(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_AUTO_CONVERGE]; |
| } |
| |
| bool migrate_zero_blocks(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_ZERO_BLOCKS]; |
| } |
| |
| bool migrate_use_compression(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_COMPRESS]; |
| } |
| |
| int migrate_compress_level(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->parameters.compress_level; |
| } |
| |
| int migrate_compress_threads(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->parameters.compress_threads; |
| } |
| |
| int migrate_decompress_threads(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->parameters.decompress_threads; |
| } |
| |
| bool migrate_use_events(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_EVENTS]; |
| } |
| |
| int migrate_use_xbzrle(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_XBZRLE]; |
| } |
| |
| int64_t migrate_xbzrle_cache_size(void) |
| { |
| MigrationState *s; |
| |
| s = migrate_get_current(); |
| |
| return s->xbzrle_cache_size; |
| } |
| |
| /* migration thread support */ |
| /* |
| * Something bad happened to the RP stream, mark an error |
| * The caller shall print or trace something to indicate why |
| */ |
| static void mark_source_rp_bad(MigrationState *s) |
| { |
| s->rp_state.error = true; |
| } |
| |
| static struct rp_cmd_args { |
| ssize_t len; /* -1 = variable */ |
| const char *name; |
| } rp_cmd_args[] = { |
| [MIG_RP_MSG_INVALID] = { .len = -1, .name = "INVALID" }, |
| [MIG_RP_MSG_SHUT] = { .len = 4, .name = "SHUT" }, |
| [MIG_RP_MSG_PONG] = { .len = 4, .name = "PONG" }, |
| [MIG_RP_MSG_REQ_PAGES] = { .len = 12, .name = "REQ_PAGES" }, |
| [MIG_RP_MSG_REQ_PAGES_ID] = { .len = -1, .name = "REQ_PAGES_ID" }, |
| [MIG_RP_MSG_MAX] = { .len = -1, .name = "MAX" }, |
| }; |
| |
| /* |
| * Process a request for pages received on the return path, |
| * We're allowed to send more than requested (e.g. to round to our page size) |
| * and we don't need to send pages that have already been sent. |
| */ |
| static void migrate_handle_rp_req_pages(MigrationState *ms, const char* rbname, |
| ram_addr_t start, size_t len) |
| { |
| long our_host_ps = getpagesize(); |
| |
| trace_migrate_handle_rp_req_pages(rbname, start, len); |
| |
| /* |
| * Since we currently insist on matching page sizes, just sanity check |
| * we're being asked for whole host pages. |
| */ |
| if (start & (our_host_ps-1) || |
| (len & (our_host_ps-1))) { |
| error_report("%s: Misaligned page request, start: " RAM_ADDR_FMT |
| " len: %zd", __func__, start, len); |
| mark_source_rp_bad(ms); |
| return; |
| } |
| |
| if (ram_save_queue_pages(ms, rbname, start, len)) { |
| mark_source_rp_bad(ms); |
| } |
| } |
| |
| /* |
| * Handles messages sent on the return path towards the source VM |
| * |
| */ |
| static void *source_return_path_thread(void *opaque) |
| { |
| MigrationState *ms = opaque; |
| QEMUFile *rp = ms->rp_state.from_dst_file; |
| uint16_t header_len, header_type; |
| uint8_t buf[512]; |
| uint32_t tmp32, sibling_error; |
| ram_addr_t start = 0; /* =0 to silence warning */ |
| size_t len = 0, expected_len; |
| int res; |
| |
| trace_source_return_path_thread_entry(); |
| while (!ms->rp_state.error && !qemu_file_get_error(rp) && |
| migration_is_setup_or_active(ms->state)) { |
| trace_source_return_path_thread_loop_top(); |
| header_type = qemu_get_be16(rp); |
| header_len = qemu_get_be16(rp); |
| |
| if (header_type >= MIG_RP_MSG_MAX || |
| header_type == MIG_RP_MSG_INVALID) { |
| error_report("RP: Received invalid message 0x%04x length 0x%04x", |
| header_type, header_len); |
| mark_source_rp_bad(ms); |
| goto out; |
| } |
| |
| if ((rp_cmd_args[header_type].len != -1 && |
| header_len != rp_cmd_args[header_type].len) || |
| header_len > sizeof(buf)) { |
| error_report("RP: Received '%s' message (0x%04x) with" |
| "incorrect length %d expecting %zu", |
| rp_cmd_args[header_type].name, header_type, header_len, |
| (size_t)rp_cmd_args[header_type].len); |
| mark_source_rp_bad(ms); |
| goto out; |
| } |
| |
| /* We know we've got a valid header by this point */ |
| res = qemu_get_buffer(rp, buf, header_len); |
| if (res != header_len) { |
| error_report("RP: Failed reading data for message 0x%04x" |
| " read %d expected %d", |
| header_type, res, header_len); |
| mark_source_rp_bad(ms); |
| goto out; |
| } |
| |
| /* OK, we have the message and the data */ |
| switch (header_type) { |
| case MIG_RP_MSG_SHUT: |
| sibling_error = ldl_be_p(buf); |
| trace_source_return_path_thread_shut(sibling_error); |
| if (sibling_error) { |
| error_report("RP: Sibling indicated error %d", sibling_error); |
| mark_source_rp_bad(ms); |
| } |
| /* |
| * We'll let the main thread deal with closing the RP |
| * we could do a shutdown(2) on it, but we're the only user |
| * anyway, so there's nothing gained. |
| */ |
| goto out; |
| |
| case MIG_RP_MSG_PONG: |
| tmp32 = ldl_be_p(buf); |
| trace_source_return_path_thread_pong(tmp32); |
| break; |
| |
| case MIG_RP_MSG_REQ_PAGES: |
| start = ldq_be_p(buf); |
| len = ldl_be_p(buf + 8); |
| migrate_handle_rp_req_pages(ms, NULL, start, len); |
| break; |
| |
| case MIG_RP_MSG_REQ_PAGES_ID: |
| expected_len = 12 + 1; /* header + termination */ |
| |
| if (header_len >= expected_len) { |
| start = ldq_be_p(buf); |
| len = ldl_be_p(buf + 8); |
| /* Now we expect an idstr */ |
| tmp32 = buf[12]; /* Length of the following idstr */ |
| buf[13 + tmp32] = '\0'; |
| expected_len += tmp32; |
| } |
| if (header_len != expected_len) { |
| error_report("RP: Req_Page_id with length %d expecting %zd", |
| header_len, expected_len); |
| mark_source_rp_bad(ms); |
| goto out; |
| } |
| migrate_handle_rp_req_pages(ms, (char *)&buf[13], start, len); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| if (qemu_file_get_error(rp)) { |
| trace_source_return_path_thread_bad_end(); |
| mark_source_rp_bad(ms); |
| } |
| |
| trace_source_return_path_thread_end(); |
| out: |
| ms->rp_state.from_dst_file = NULL; |
| qemu_fclose(rp); |
| return NULL; |
| } |
| |
| static int open_return_path_on_source(MigrationState *ms) |
| { |
| |
| ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->to_dst_file); |
| if (!ms->rp_state.from_dst_file) { |
| return -1; |
| } |
| |
| trace_open_return_path_on_source(); |
| qemu_thread_create(&ms->rp_state.rp_thread, "return path", |
| source_return_path_thread, ms, QEMU_THREAD_JOINABLE); |
| |
| trace_open_return_path_on_source_continue(); |
| |
| return 0; |
| } |
| |
| /* Returns 0 if the RP was ok, otherwise there was an error on the RP */ |
| static int await_return_path_close_on_source(MigrationState *ms) |
| { |
| /* |
| * If this is a normal exit then the destination will send a SHUT and the |
| * rp_thread will exit, however if there's an error we need to cause |
| * it to exit. |
| */ |
| if (qemu_file_get_error(ms->to_dst_file) && ms->rp_state.from_dst_file) { |
| /* |
| * shutdown(2), if we have it, will cause it to unblock if it's stuck |
| * waiting for the destination. |
| */ |
| qemu_file_shutdown(ms->rp_state.from_dst_file); |
| mark_source_rp_bad(ms); |
| } |
| trace_await_return_path_close_on_source_joining(); |
| qemu_thread_join(&ms->rp_state.rp_thread); |
| trace_await_return_path_close_on_source_close(); |
| return ms->rp_state.error; |
| } |
| |
| /* |
| * Switch from normal iteration to postcopy |
| * Returns non-0 on error |
| */ |
| static int postcopy_start(MigrationState *ms, bool *old_vm_running) |
| { |
| int ret; |
| QIOChannelBuffer *bioc; |
| QEMUFile *fb; |
| int64_t time_at_stop = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); |
| bool restart_block = false; |
| migrate_set_state(&ms->state, MIGRATION_STATUS_ACTIVE, |
| MIGRATION_STATUS_POSTCOPY_ACTIVE); |
| |
| trace_postcopy_start(); |
| qemu_mutex_lock_iothread(); |
| trace_postcopy_start_set_run(); |
| |
| qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER); |
| *old_vm_running = runstate_is_running(); |
| global_state_store(); |
| ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); |
| if (ret < 0) { |
| goto fail; |
| } |
| |
| ret = bdrv_inactivate_all(); |
| if (ret < 0) { |
| goto fail; |
| } |
| restart_block = true; |
| |
| /* |
| * Cause any non-postcopiable, but iterative devices to |
| * send out their final data. |
| */ |
| qemu_savevm_state_complete_precopy(ms->to_dst_file, true); |
| |
| /* |
| * in Finish migrate and with the io-lock held everything should |
| * be quiet, but we've potentially still got dirty pages and we |
| * need to tell the destination to throw any pages it's already received |
| * that are dirty |
| */ |
| if (ram_postcopy_send_discard_bitmap(ms)) { |
| error_report("postcopy send discard bitmap failed"); |
| goto fail; |
| } |
| |
| /* |
| * send rest of state - note things that are doing postcopy |
| * will notice we're in POSTCOPY_ACTIVE and not actually |
| * wrap their state up here |
| */ |
| qemu_file_set_rate_limit(ms->to_dst_file, INT64_MAX); |
| /* Ping just for debugging, helps line traces up */ |
| qemu_savevm_send_ping(ms->to_dst_file, 2); |
| |
| /* |
| * While loading the device state we may trigger page transfer |
| * requests and the fd must be free to process those, and thus |
| * the destination must read the whole device state off the fd before |
| * it starts processing it. Unfortunately the ad-hoc migration format |
| * doesn't allow the destination to know the size to read without fully |
| * parsing it through each devices load-state code (especially the open |
| * coded devices that use get/put). |
| * So we wrap the device state up in a package with a length at the start; |
| * to do this we use a qemu_buf to hold the whole of the device state. |
| */ |
| bioc = qio_channel_buffer_new(4096); |
| qio_channel_set_name(QIO_CHANNEL(bioc), "migration-postcopy-buffer"); |
| fb = qemu_fopen_channel_output(QIO_CHANNEL(bioc)); |
| object_unref(OBJECT(bioc)); |
| |
| /* |
| * Make sure the receiver can get incoming pages before we send the rest |
| * of the state |
| */ |
| qemu_savevm_send_postcopy_listen(fb); |
| |
| qemu_savevm_state_complete_precopy(fb, false); |
| qemu_savevm_send_ping(fb, 3); |
| |
| qemu_savevm_send_postcopy_run(fb); |
| |
| /* <><> end of stuff going into the package */ |
| |
| /* Last point of recovery; as soon as we send the package the destination |
| * can open devices and potentially start running. |
| * Lets just check again we've not got any errors. |
| */ |
| ret = qemu_file_get_error(ms->to_dst_file); |
| if (ret) { |
| error_report("postcopy_start: Migration stream errored (pre package)"); |
| goto fail_closefb; |
| } |
| |
| restart_block = false; |
| |
| /* Now send that blob */ |
| if (qemu_savevm_send_packaged(ms->to_dst_file, bioc->data, bioc->usage)) { |
| goto fail_closefb; |
| } |
| qemu_fclose(fb); |
| |
| /* Send a notify to give a chance for anything that needs to happen |
| * at the transition to postcopy and after the device state; in particular |
| * spice needs to trigger a transition now |
| */ |
| ms->postcopy_after_devices = true; |
| notifier_list_notify(&migration_state_notifiers, ms); |
| |
| ms->downtime = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) - time_at_stop; |
| |
| qemu_mutex_unlock_iothread(); |
| |
| /* |
| * Although this ping is just for debug, it could potentially be |
| * used for getting a better measurement of downtime at the source. |
| */ |
| qemu_savevm_send_ping(ms->to_dst_file, 4); |
| |
| if (migrate_release_ram()) { |
| ram_postcopy_migrated_memory_release(ms); |
| } |
| |
| ret = qemu_file_get_error(ms->to_dst_file); |
| if (ret) { |
| error_report("postcopy_start: Migration stream errored"); |
| migrate_set_state(&ms->state, MIGRATION_STATUS_POSTCOPY_ACTIVE, |
| MIGRATION_STATUS_FAILED); |
| } |
| |
| return ret; |
| |
| fail_closefb: |
| qemu_fclose(fb); |
| fail: |
| migrate_set_state(&ms->state, MIGRATION_STATUS_POSTCOPY_ACTIVE, |
| MIGRATION_STATUS_FAILED); |
| if (restart_block) { |
| /* A failure happened early enough that we know the destination hasn't |
| * accessed block devices, so we're safe to recover. |
| */ |
| Error *local_err = NULL; |
| |
| bdrv_invalidate_cache_all(&local_err); |
| if (local_err) { |
| error_report_err(local_err); |
| } |
| } |
| qemu_mutex_unlock_iothread(); |
| return -1; |
| } |
| |
| /** |
| * migration_completion: Used by migration_thread when there's not much left. |
| * The caller 'breaks' the loop when this returns. |
| * |
| * @s: Current migration state |
| * @current_active_state: The migration state we expect to be in |
| * @*old_vm_running: Pointer to old_vm_running flag |
| * @*start_time: Pointer to time to update |
| */ |
| static void migration_completion(MigrationState *s, int current_active_state, |
| bool *old_vm_running, |
| int64_t *start_time) |
| { |
| int ret; |
| |
| if (s->state == MIGRATION_STATUS_ACTIVE) { |
| qemu_mutex_lock_iothread(); |
| *start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); |
| qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER); |
| *old_vm_running = runstate_is_running(); |
| ret = global_state_store(); |
| |
| if (!ret) { |
| ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); |
| /* |
| * Don't mark the image with BDRV_O_INACTIVE flag if |
| * we will go into COLO stage later. |
| */ |
| if (ret >= 0 && !migrate_colo_enabled()) { |
| ret = bdrv_inactivate_all(); |
| } |
| if (ret >= 0) { |
| qemu_file_set_rate_limit(s->to_dst_file, INT64_MAX); |
| qemu_savevm_state_complete_precopy(s->to_dst_file, false); |
| s->block_inactive = true; |
| } |
| } |
| qemu_mutex_unlock_iothread(); |
| |
| if (ret < 0) { |
| goto fail; |
| } |
| } else if (s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE) { |
| trace_migration_completion_postcopy_end(); |
| |
| qemu_savevm_state_complete_postcopy(s->to_dst_file); |
| trace_migration_completion_postcopy_end_after_complete(); |
| } |
| |
| /* |
| * If rp was opened we must clean up the thread before |
| * cleaning everything else up (since if there are no failures |
| * it will wait for the destination to send it's status in |
| * a SHUT command). |
| * Postcopy opens rp if enabled (even if it's not avtivated) |
| */ |
| if (migrate_postcopy_ram()) { |
| int rp_error; |
| trace_migration_completion_postcopy_end_before_rp(); |
| rp_error = await_return_path_close_on_source(s); |
| trace_migration_completion_postcopy_end_after_rp(rp_error); |
| if (rp_error) { |
| goto fail_invalidate; |
| } |
| } |
| |
| if (qemu_file_get_error(s->to_dst_file)) { |
| trace_migration_completion_file_err(); |
| goto fail_invalidate; |
| } |
| |
| if (!migrate_colo_enabled()) { |
| migrate_set_state(&s->state, current_active_state, |
| MIGRATION_STATUS_COMPLETED); |
| } |
| |
| return; |
| |
| fail_invalidate: |
| /* If not doing postcopy, vm_start() will be called: let's regain |
| * control on images. |
| */ |
| if (s->state == MIGRATION_STATUS_ACTIVE) { |
| Error *local_err = NULL; |
| |
| qemu_mutex_lock_iothread(); |
| bdrv_invalidate_cache_all(&local_err); |
| if (local_err) { |
| error_report_err(local_err); |
| } else { |
| s->block_inactive = false; |
| } |
| qemu_mutex_unlock_iothread(); |
| } |
| |
| fail: |
| migrate_set_state(&s->state, current_active_state, |
| MIGRATION_STATUS_FAILED); |
| } |
| |
| bool migrate_colo_enabled(void) |
| { |
| MigrationState *s = migrate_get_current(); |
| return s->enabled_capabilities[MIGRATION_CAPABILITY_X_COLO]; |
| } |
| |
| /* |
| * Master migration thread on the source VM. |
| * It drives the migration and pumps the data down the outgoing channel. |
| */ |
| static void *migration_thread(void *opaque) |
| { |
| MigrationState *s = opaque; |
| /* Used by the bandwidth calcs, updated later */ |
| int64_t initial_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); |
| int64_t setup_start = qemu_clock_get_ms(QEMU_CLOCK_HOST); |
| int64_t initial_bytes = 0; |
| int64_t max_size = 0; |
| int64_t start_time = initial_time; |
| int64_t end_time; |
| bool old_vm_running = false; |
| bool entered_postcopy = false; |
| /* The active state we expect to be in; ACTIVE or POSTCOPY_ACTIVE */ |
| enum MigrationStatus current_active_state = MIGRATION_STATUS_ACTIVE; |
| bool enable_colo = migrate_colo_enabled(); |
| |
| rcu_register_thread(); |
| |
| qemu_savevm_state_header(s->to_dst_file); |
| |
| if (migrate_postcopy_ram()) { |
| /* Now tell the dest that it should open its end so it can reply */ |
| qemu_savevm_send_open_return_path(s->to_dst_file); |
| |
| /* And do a ping that will make stuff easier to debug */ |
| qemu_savevm_send_ping(s->to_dst_file, 1); |
| |
| /* |
| * Tell the destination that we *might* want to do postcopy later; |
| * if the other end can't do postcopy it should fail now, nice and |
| * early. |
| */ |
| qemu_savevm_send_postcopy_advise(s->to_dst_file); |
| } |
| |
| qemu_savevm_state_begin(s->to_dst_file, &s->params); |
| |
| s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start; |
| current_active_state = MIGRATION_STATUS_ACTIVE; |
| migrate_set_state(&s->state, MIGRATION_STATUS_SETUP, |
| MIGRATION_STATUS_ACTIVE); |
| |
| trace_migration_thread_setup_complete(); |
| |
| while (s->state == MIGRATION_STATUS_ACTIVE || |
| s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE) { |
| int64_t current_time; |
| uint64_t pending_size; |
| |
| if (!qemu_file_rate_limit(s->to_dst_file)) { |
| uint64_t pend_post, pend_nonpost; |
| |
| qemu_savevm_state_pending(s->to_dst_file, max_size, &pend_nonpost, |
| &pend_post); |
| pending_size = pend_nonpost + pend_post; |
| trace_migrate_pending(pending_size, max_size, |
| pend_post, pend_nonpost); |
| if (pending_size && pending_size >= max_size) { |
| /* Still a significant amount to transfer */ |
| |
| if (migrate_postcopy_ram() && |
| s->state != MIGRATION_STATUS_POSTCOPY_ACTIVE && |
| pend_nonpost <= max_size && |
| atomic_read(&s->start_postcopy)) { |
| |
| if (!postcopy_start(s, &old_vm_running)) { |
| current_active_state = MIGRATION_STATUS_POSTCOPY_ACTIVE; |
| entered_postcopy = true; |
| } |
| |
| continue; |
| } |
| /* Just another iteration step */ |
| qemu_savevm_state_iterate(s->to_dst_file, entered_postcopy); |
| } else { |
| trace_migration_thread_low_pending(pending_size); |
| migration_completion(s, current_active_state, |
| &old_vm_running, &start_time); |
| break; |
| } |
| } |
| |
| if (qemu_file_get_error(s->to_dst_file)) { |
| migrate_set_state(&s->state, current_active_state, |
| MIGRATION_STATUS_FAILED); |
| trace_migration_thread_file_err(); |
| break; |
| } |
| current_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); |
| if (current_time >= initial_time + BUFFER_DELAY) { |
| uint64_t transferred_bytes = qemu_ftell(s->to_dst_file) - |
| initial_bytes; |
| uint64_t time_spent = current_time - initial_time; |
| double bandwidth = (double)transferred_bytes / time_spent; |
| max_size = bandwidth * s->parameters.downtime_limit; |
| |
| s->mbps = (((double) transferred_bytes * 8.0) / |
| ((double) time_spent / 1000.0)) / 1000.0 / 1000.0; |
| |
| trace_migrate_transferred(transferred_bytes, time_spent, |
| bandwidth, max_size); |
| /* if we haven't sent anything, we don't want to recalculate |
| 10000 is a small enough number for our purposes */ |
| if (s->dirty_bytes_rate && transferred_bytes > 10000) { |
| s->expected_downtime = s->dirty_bytes_rate / bandwidth; |
| } |
| |
| qemu_file_reset_rate_limit(s->to_dst_file); |
| initial_time = current_time; |
| initial_bytes = qemu_ftell(s->to_dst_file); |
| } |
| if (qemu_file_rate_limit(s->to_dst_file)) { |
| /* usleep expects microseconds */ |
| g_usleep((initial_time + BUFFER_DELAY - current_time)*1000); |
| } |
| } |
| |
| trace_migration_thread_after_loop(); |
| /* If we enabled cpu throttling for auto-converge, turn it off. */ |
| cpu_throttle_stop(); |
| end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); |
| |
| qemu_mutex_lock_iothread(); |
| /* |
| * The resource has been allocated by migration will be reused in COLO |
| * process, so don't release them. |
| */ |
| if (!enable_colo) { |
| qemu_savevm_state_cleanup(); |
| } |
| if (s->state == MIGRATION_STATUS_COMPLETED) { |
| uint64_t transferred_bytes = qemu_ftell(s->to_dst_file); |
| s->total_time = end_time - s->total_time; |
| if (!entered_postcopy) { |
| s->downtime = end_time - start_time; |
| } |
| if (s->total_time) { |
| s->mbps = (((double) transferred_bytes * 8.0) / |
| ((double) s->total_time)) / 1000; |
| } |
| runstate_set(RUN_STATE_POSTMIGRATE); |
| } else { |
| if (s->state == MIGRATION_STATUS_ACTIVE && enable_colo) { |
| migrate_start_colo_process(s); |
| qemu_savevm_state_cleanup(); |
| /* |
| * Fixme: we will run VM in COLO no matter its old running state. |
| * After exited COLO, we will keep running. |
| */ |
| old_vm_running = true; |
| } |
| if (old_vm_running && !entered_postcopy) { |
| vm_start(); |
| } else { |
| if (runstate_check(RUN_STATE_FINISH_MIGRATE)) { |
| runstate_set(RUN_STATE_POSTMIGRATE); |
| } |
| } |
| } |
| qemu_bh_schedule(s->cleanup_bh); |
| qemu_mutex_unlock_iothread(); |
| |
| rcu_unregister_thread(); |
| return NULL; |
| } |
| |
| void migrate_fd_connect(MigrationState *s) |
| { |
| s->expected_downtime = s->parameters.downtime_limit; |
| s->cleanup_bh = qemu_bh_new(migrate_fd_cleanup, s); |
| |
| qemu_file_set_blocking(s->to_dst_file, true); |
| qemu_file_set_rate_limit(s->to_dst_file, |
| s->parameters.max_bandwidth / XFER_LIMIT_RATIO); |
| |
| /* Notify before starting migration thread */ |
| notifier_list_notify(&migration_state_notifiers, s); |
| |
| /* |
| * Open the return path; currently for postcopy but other things might |
| * also want it. |
| */ |
| if (migrate_postcopy_ram()) { |
| if (open_return_path_on_source(s)) { |
| error_report("Unable to open return-path for postcopy"); |
| migrate_set_state(&s->state, MIGRATION_STATUS_SETUP, |
| MIGRATION_STATUS_FAILED); |
| migrate_fd_cleanup(s); |
| return; |
| } |
| } |
| |
| migrate_compress_threads_create(); |
| qemu_thread_create(&s->thread, "live_migration", migration_thread, s, |
| QEMU_THREAD_JOINABLE); |
| s->migration_thread_running = true; |
| } |
| |
| PostcopyState postcopy_state_get(void) |
| { |
| return atomic_mb_read(&incoming_postcopy_state); |
| } |
| |
| /* Set the state and return the old state */ |
| PostcopyState postcopy_state_set(PostcopyState new_state) |
| { |
| return atomic_xchg(&incoming_postcopy_state, new_state); |
| } |
| |