| /* |
| * QEMU model of the Xilinx BBRAM Battery Backed RAM |
| * |
| * Copyright (c) 2014-2021 Xilinx Inc. |
| * Copyright (c) 2023 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/nvram/xlnx-bbram.h" |
| |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qapi/error.h" |
| #include "sysemu/blockdev.h" |
| #include "migration/vmstate.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "hw/nvram/xlnx-efuse.h" |
| |
| #ifndef XLNX_BBRAM_ERR_DEBUG |
| #define XLNX_BBRAM_ERR_DEBUG 0 |
| #endif |
| |
| REG32(BBRAM_STATUS, 0x0) |
| FIELD(BBRAM_STATUS, AES_CRC_PASS, 9, 1) |
| FIELD(BBRAM_STATUS, AES_CRC_DONE, 8, 1) |
| FIELD(BBRAM_STATUS, BBRAM_ZEROIZED, 4, 1) |
| FIELD(BBRAM_STATUS, PGM_MODE, 0, 1) |
| REG32(BBRAM_CTRL, 0x4) |
| FIELD(BBRAM_CTRL, ZEROIZE, 0, 1) |
| REG32(PGM_MODE, 0x8) |
| REG32(BBRAM_AES_CRC, 0xc) |
| REG32(BBRAM_0, 0x10) |
| REG32(BBRAM_1, 0x14) |
| REG32(BBRAM_2, 0x18) |
| REG32(BBRAM_3, 0x1c) |
| REG32(BBRAM_4, 0x20) |
| REG32(BBRAM_5, 0x24) |
| REG32(BBRAM_6, 0x28) |
| REG32(BBRAM_7, 0x2c) |
| REG32(BBRAM_8, 0x30) |
| REG32(BBRAM_SLVERR, 0x34) |
| FIELD(BBRAM_SLVERR, ENABLE, 0, 1) |
| REG32(BBRAM_ISR, 0x38) |
| FIELD(BBRAM_ISR, APB_SLVERR, 0, 1) |
| REG32(BBRAM_IMR, 0x3c) |
| FIELD(BBRAM_IMR, APB_SLVERR, 0, 1) |
| REG32(BBRAM_IER, 0x40) |
| FIELD(BBRAM_IER, APB_SLVERR, 0, 1) |
| REG32(BBRAM_IDR, 0x44) |
| FIELD(BBRAM_IDR, APB_SLVERR, 0, 1) |
| REG32(BBRAM_MSW_LOCK, 0x4c) |
| FIELD(BBRAM_MSW_LOCK, VAL, 0, 1) |
| |
| #define R_MAX (R_BBRAM_MSW_LOCK + 1) |
| |
| #define RAM_MAX (A_BBRAM_8 + 4 - A_BBRAM_0) |
| |
| #define BBRAM_PGM_MAGIC 0x757bdf0d |
| |
| QEMU_BUILD_BUG_ON(R_MAX != ARRAY_SIZE(((XlnxBBRam *)0)->regs)); |
| |
| static bool bbram_msw_locked(XlnxBBRam *s) |
| { |
| return ARRAY_FIELD_EX32(s->regs, BBRAM_MSW_LOCK, VAL) != 0; |
| } |
| |
| static bool bbram_pgm_enabled(XlnxBBRam *s) |
| { |
| return ARRAY_FIELD_EX32(s->regs, BBRAM_STATUS, PGM_MODE) != 0; |
| } |
| |
| static void bbram_bdrv_error(XlnxBBRam *s, int rc, gchar *detail) |
| { |
| Error *errp = NULL; |
| |
| error_setg_errno(&errp, -rc, "%s: BBRAM backstore %s failed.", |
| blk_name(s->blk), detail); |
| error_report("%s", error_get_pretty(errp)); |
| error_free(errp); |
| |
| g_free(detail); |
| } |
| |
| static void bbram_bdrv_read(XlnxBBRam *s, Error **errp) |
| { |
| uint32_t *ram = &s->regs[R_BBRAM_0]; |
| int nr = RAM_MAX; |
| |
| if (!s->blk) { |
| return; |
| } |
| |
| s->blk_ro = !blk_supports_write_perm(s->blk); |
| if (!s->blk_ro) { |
| int rc; |
| |
| rc = blk_set_perm(s->blk, |
| (BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE), |
| BLK_PERM_ALL, NULL); |
| if (rc) { |
| s->blk_ro = true; |
| } |
| } |
| if (s->blk_ro) { |
| warn_report("%s: Skip saving updates to read-only BBRAM backstore.", |
| blk_name(s->blk)); |
| } |
| |
| if (blk_pread(s->blk, 0, nr, ram, 0) < 0) { |
| error_setg(errp, |
| "%s: Failed to read %u bytes from BBRAM backstore.", |
| blk_name(s->blk), nr); |
| return; |
| } |
| |
| /* Convert from little-endian backstore for each 32-bit word */ |
| nr /= 4; |
| while (nr--) { |
| ram[nr] = le32_to_cpu(ram[nr]); |
| } |
| } |
| |
| static void bbram_bdrv_sync(XlnxBBRam *s, uint64_t hwaddr) |
| { |
| uint32_t le32; |
| unsigned offset; |
| int rc; |
| |
| assert(A_BBRAM_0 <= hwaddr && hwaddr <= A_BBRAM_8); |
| |
| /* Backstore is always in little-endian */ |
| le32 = cpu_to_le32(s->regs[hwaddr / 4]); |
| |
| /* Update zeroized flag */ |
| if (le32 && (hwaddr != A_BBRAM_8 || s->bbram8_wo)) { |
| ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, BBRAM_ZEROIZED, 0); |
| } |
| |
| if (!s->blk || s->blk_ro) { |
| return; |
| } |
| |
| offset = hwaddr - A_BBRAM_0; |
| rc = blk_pwrite(s->blk, offset, 4, &le32, 0); |
| if (rc < 0) { |
| bbram_bdrv_error(s, rc, g_strdup_printf("write to offset %u", offset)); |
| } |
| } |
| |
| static void bbram_bdrv_zero(XlnxBBRam *s) |
| { |
| int rc; |
| |
| ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, BBRAM_ZEROIZED, 1); |
| |
| if (!s->blk || s->blk_ro) { |
| return; |
| } |
| |
| rc = blk_make_zero(s->blk, 0); |
| if (rc < 0) { |
| bbram_bdrv_error(s, rc, g_strdup("zeroizing")); |
| } |
| |
| /* Restore bbram8 if it is non-zero */ |
| if (s->regs[R_BBRAM_8]) { |
| bbram_bdrv_sync(s, A_BBRAM_8); |
| } |
| } |
| |
| static void bbram_zeroize(XlnxBBRam *s) |
| { |
| int nr = RAM_MAX - (s->bbram8_wo ? 0 : 4); /* only wo bbram8 is cleared */ |
| |
| memset(&s->regs[R_BBRAM_0], 0, nr); |
| bbram_bdrv_zero(s); |
| } |
| |
| static void bbram_update_irq(XlnxBBRam *s) |
| { |
| bool pending = s->regs[R_BBRAM_ISR] & ~s->regs[R_BBRAM_IMR]; |
| |
| qemu_set_irq(s->irq_bbram, pending); |
| } |
| |
| static void bbram_ctrl_postw(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| uint32_t val = val64; |
| |
| if (val & R_BBRAM_CTRL_ZEROIZE_MASK) { |
| bbram_zeroize(s); |
| /* The bit is self clearing */ |
| s->regs[R_BBRAM_CTRL] &= ~R_BBRAM_CTRL_ZEROIZE_MASK; |
| } |
| } |
| |
| static void bbram_pgm_mode_postw(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| uint32_t val = val64; |
| |
| if (val == BBRAM_PGM_MAGIC) { |
| bbram_zeroize(s); |
| |
| /* The status bit is cleared only by POR */ |
| ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, PGM_MODE, 1); |
| } |
| } |
| |
| static void bbram_aes_crc_postw(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| uint32_t calc_crc; |
| |
| if (!bbram_pgm_enabled(s)) { |
| /* We are not in programming mode, don't do anything */ |
| return; |
| } |
| |
| /* Perform the AES integrity check */ |
| s->regs[R_BBRAM_STATUS] |= R_BBRAM_STATUS_AES_CRC_DONE_MASK; |
| |
| /* |
| * Set check status. |
| * |
| * ZynqMP BBRAM check has a zero-u32 prepended; see: |
| * https://github.com/Xilinx/embeddedsw/blob/release-2019.2/lib/sw_services/xilskey/src/xilskey_bbramps_zynqmp.c#L311 |
| */ |
| calc_crc = xlnx_efuse_calc_crc(&s->regs[R_BBRAM_0], |
| (R_BBRAM_8 - R_BBRAM_0), s->crc_zpads); |
| |
| ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, AES_CRC_PASS, |
| (s->regs[R_BBRAM_AES_CRC] == calc_crc)); |
| } |
| |
| static uint64_t bbram_key_prew(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| uint32_t original_data = *(uint32_t *) reg->data; |
| |
| if (bbram_pgm_enabled(s)) { |
| return val64; |
| } else { |
| /* We are not in programming mode, don't do anything */ |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Not in programming mode, dropping the write\n"); |
| return original_data; |
| } |
| } |
| |
| static void bbram_key_postw(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| |
| bbram_bdrv_sync(s, reg->access->addr); |
| } |
| |
| static uint64_t bbram_wo_postr(RegisterInfo *reg, uint64_t val) |
| { |
| return 0; |
| } |
| |
| static uint64_t bbram_r8_postr(RegisterInfo *reg, uint64_t val) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| |
| return s->bbram8_wo ? bbram_wo_postr(reg, val) : val; |
| } |
| |
| static bool bbram_r8_readonly(XlnxBBRam *s) |
| { |
| return !bbram_pgm_enabled(s) || bbram_msw_locked(s); |
| } |
| |
| static uint64_t bbram_r8_prew(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| |
| if (bbram_r8_readonly(s)) { |
| val64 = *(uint32_t *)reg->data; |
| } |
| |
| return val64; |
| } |
| |
| static void bbram_r8_postw(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| |
| if (!bbram_r8_readonly(s)) { |
| bbram_bdrv_sync(s, A_BBRAM_8); |
| } |
| } |
| |
| static uint64_t bbram_msw_lock_prew(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| |
| /* Never lock if bbram8 is wo; and, only POR can clear the lock */ |
| if (s->bbram8_wo) { |
| val64 = 0; |
| } else { |
| val64 |= s->regs[R_BBRAM_MSW_LOCK]; |
| } |
| |
| return val64; |
| } |
| |
| static void bbram_isr_postw(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| |
| bbram_update_irq(s); |
| } |
| |
| static uint64_t bbram_ier_prew(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| uint32_t val = val64; |
| |
| s->regs[R_BBRAM_IMR] &= ~val; |
| bbram_update_irq(s); |
| return 0; |
| } |
| |
| static uint64_t bbram_idr_prew(RegisterInfo *reg, uint64_t val64) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(reg->opaque); |
| uint32_t val = val64; |
| |
| s->regs[R_BBRAM_IMR] |= val; |
| bbram_update_irq(s); |
| return 0; |
| } |
| |
| static RegisterAccessInfo bbram_ctrl_regs_info[] = { |
| { .name = "BBRAM_STATUS", .addr = A_BBRAM_STATUS, |
| .rsvd = 0xee, |
| .ro = 0x3ff, |
| },{ .name = "BBRAM_CTRL", .addr = A_BBRAM_CTRL, |
| .post_write = bbram_ctrl_postw, |
| },{ .name = "PGM_MODE", .addr = A_PGM_MODE, |
| .post_write = bbram_pgm_mode_postw, |
| },{ .name = "BBRAM_AES_CRC", .addr = A_BBRAM_AES_CRC, |
| .post_write = bbram_aes_crc_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_0", .addr = A_BBRAM_0, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_1", .addr = A_BBRAM_1, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_2", .addr = A_BBRAM_2, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_3", .addr = A_BBRAM_3, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_4", .addr = A_BBRAM_4, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_5", .addr = A_BBRAM_5, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_6", .addr = A_BBRAM_6, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_7", .addr = A_BBRAM_7, |
| .pre_write = bbram_key_prew, |
| .post_write = bbram_key_postw, |
| .post_read = bbram_wo_postr, |
| },{ .name = "BBRAM_8", .addr = A_BBRAM_8, |
| .pre_write = bbram_r8_prew, |
| .post_write = bbram_r8_postw, |
| .post_read = bbram_r8_postr, |
| },{ .name = "BBRAM_SLVERR", .addr = A_BBRAM_SLVERR, |
| .rsvd = ~1, |
| },{ .name = "BBRAM_ISR", .addr = A_BBRAM_ISR, |
| .w1c = 0x1, |
| .post_write = bbram_isr_postw, |
| },{ .name = "BBRAM_IMR", .addr = A_BBRAM_IMR, |
| .ro = 0x1, |
| },{ .name = "BBRAM_IER", .addr = A_BBRAM_IER, |
| .pre_write = bbram_ier_prew, |
| },{ .name = "BBRAM_IDR", .addr = A_BBRAM_IDR, |
| .pre_write = bbram_idr_prew, |
| },{ .name = "BBRAM_MSW_LOCK", .addr = A_BBRAM_MSW_LOCK, |
| .pre_write = bbram_msw_lock_prew, |
| .ro = ~R_BBRAM_MSW_LOCK_VAL_MASK, |
| } |
| }; |
| |
| static void bbram_ctrl_reset_hold(Object *obj) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(obj); |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { |
| if (i < R_BBRAM_0 || i > R_BBRAM_8) { |
| register_reset(&s->regs_info[i]); |
| } |
| } |
| |
| bbram_update_irq(s); |
| } |
| |
| static const MemoryRegionOps bbram_ctrl_ops = { |
| .read = register_read_memory, |
| .write = register_write_memory, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static void bbram_ctrl_realize(DeviceState *dev, Error **errp) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(dev); |
| |
| if (s->crc_zpads) { |
| s->bbram8_wo = true; |
| } |
| |
| bbram_bdrv_read(s, errp); |
| } |
| |
| static void bbram_ctrl_init(Object *obj) |
| { |
| XlnxBBRam *s = XLNX_BBRAM(obj); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| RegisterInfoArray *reg_array; |
| |
| reg_array = |
| register_init_block32(DEVICE(obj), bbram_ctrl_regs_info, |
| ARRAY_SIZE(bbram_ctrl_regs_info), |
| s->regs_info, s->regs, |
| &bbram_ctrl_ops, |
| XLNX_BBRAM_ERR_DEBUG, |
| R_MAX * 4); |
| |
| sysbus_init_mmio(sbd, ®_array->mem); |
| sysbus_init_irq(sbd, &s->irq_bbram); |
| } |
| |
| static void bbram_prop_set_drive(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| |
| qdev_prop_drive.set(obj, v, name, opaque, errp); |
| |
| /* Fill initial data if backend is attached after realized */ |
| if (dev->realized) { |
| bbram_bdrv_read(XLNX_BBRAM(obj), errp); |
| } |
| } |
| |
| static void bbram_prop_get_drive(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| qdev_prop_drive.get(obj, v, name, opaque, errp); |
| } |
| |
| static void bbram_prop_release_drive(Object *obj, const char *name, |
| void *opaque) |
| { |
| qdev_prop_drive.release(obj, name, opaque); |
| } |
| |
| static const PropertyInfo bbram_prop_drive = { |
| .name = "str", |
| .description = "Node name or ID of a block device to use as BBRAM backend", |
| .realized_set_allowed = true, |
| .get = bbram_prop_get_drive, |
| .set = bbram_prop_set_drive, |
| .release = bbram_prop_release_drive, |
| }; |
| |
| static const VMStateDescription vmstate_bbram_ctrl = { |
| .name = TYPE_XLNX_BBRAM, |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, XlnxBBRam, R_MAX), |
| VMSTATE_END_OF_LIST(), |
| } |
| }; |
| |
| static Property bbram_ctrl_props[] = { |
| DEFINE_PROP("drive", XlnxBBRam, blk, bbram_prop_drive, BlockBackend *), |
| DEFINE_PROP_UINT32("crc-zpads", XlnxBBRam, crc_zpads, 1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void bbram_ctrl_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| |
| rc->phases.hold = bbram_ctrl_reset_hold; |
| dc->realize = bbram_ctrl_realize; |
| dc->vmsd = &vmstate_bbram_ctrl; |
| device_class_set_props(dc, bbram_ctrl_props); |
| } |
| |
| static const TypeInfo bbram_ctrl_info = { |
| .name = TYPE_XLNX_BBRAM, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(XlnxBBRam), |
| .class_init = bbram_ctrl_class_init, |
| .instance_init = bbram_ctrl_init, |
| }; |
| |
| static void bbram_ctrl_register_types(void) |
| { |
| type_register_static(&bbram_ctrl_info); |
| } |
| |
| type_init(bbram_ctrl_register_types) |