| /* |
| * QEMU USB OHCI Emulation |
| * Copyright (c) 2004 Gianni Tedesco |
| * Copyright (c) 2006 CodeSourcery |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * TODO: |
| * o Isochronous transfers |
| * o Allocate bandwidth in frames properly |
| * o Disable timers when nothing needs to be done, or remove timer usage |
| * all together. |
| * o Handle unrecoverable errors properly |
| * o BIOS work to boot from USB storage |
| */ |
| |
| #include "hw.h" |
| #include "qemu-timer.h" |
| #include "usb.h" |
| #include "pci.h" |
| |
| //#define DEBUG_OHCI |
| /* Dump packet contents. */ |
| //#define DEBUG_PACKET |
| //#define DEBUG_ISOCH |
| /* This causes frames to occur 1000x slower */ |
| //#define OHCI_TIME_WARP 1 |
| |
| #ifdef DEBUG_OHCI |
| #define dprintf printf |
| #else |
| #define dprintf(...) |
| #endif |
| |
| /* Number of Downstream Ports on the root hub. */ |
| |
| #define OHCI_MAX_PORTS 15 |
| |
| static int64_t usb_frame_time; |
| static int64_t usb_bit_time; |
| |
| typedef struct OHCIPort { |
| USBPort port; |
| uint32_t ctrl; |
| } OHCIPort; |
| |
| enum ohci_type { |
| OHCI_TYPE_PCI, |
| OHCI_TYPE_PXA |
| }; |
| |
| typedef struct { |
| qemu_irq irq; |
| enum ohci_type type; |
| target_phys_addr_t mem_base; |
| int mem; |
| int num_ports; |
| const char *name; |
| |
| QEMUTimer *eof_timer; |
| int64_t sof_time; |
| |
| /* OHCI state */ |
| /* Control partition */ |
| uint32_t ctl, status; |
| uint32_t intr_status; |
| uint32_t intr; |
| |
| /* memory pointer partition */ |
| uint32_t hcca; |
| uint32_t ctrl_head, ctrl_cur; |
| uint32_t bulk_head, bulk_cur; |
| uint32_t per_cur; |
| uint32_t done; |
| int done_count; |
| |
| /* Frame counter partition */ |
| uint32_t fsmps:15; |
| uint32_t fit:1; |
| uint32_t fi:14; |
| uint32_t frt:1; |
| uint16_t frame_number; |
| uint16_t padding; |
| uint32_t pstart; |
| uint32_t lst; |
| |
| /* Root Hub partition */ |
| uint32_t rhdesc_a, rhdesc_b; |
| uint32_t rhstatus; |
| OHCIPort rhport[OHCI_MAX_PORTS]; |
| |
| /* PXA27x Non-OHCI events */ |
| uint32_t hstatus; |
| uint32_t hmask; |
| uint32_t hreset; |
| uint32_t htest; |
| |
| /* Active packets. */ |
| uint32_t old_ctl; |
| USBPacket usb_packet; |
| uint8_t usb_buf[8192]; |
| uint32_t async_td; |
| int async_complete; |
| |
| } OHCIState; |
| |
| /* Host Controller Communications Area */ |
| struct ohci_hcca { |
| uint32_t intr[32]; |
| uint16_t frame, pad; |
| uint32_t done; |
| }; |
| |
| static void ohci_bus_stop(OHCIState *ohci); |
| |
| /* Bitfields for the first word of an Endpoint Desciptor. */ |
| #define OHCI_ED_FA_SHIFT 0 |
| #define OHCI_ED_FA_MASK (0x7f<<OHCI_ED_FA_SHIFT) |
| #define OHCI_ED_EN_SHIFT 7 |
| #define OHCI_ED_EN_MASK (0xf<<OHCI_ED_EN_SHIFT) |
| #define OHCI_ED_D_SHIFT 11 |
| #define OHCI_ED_D_MASK (3<<OHCI_ED_D_SHIFT) |
| #define OHCI_ED_S (1<<13) |
| #define OHCI_ED_K (1<<14) |
| #define OHCI_ED_F (1<<15) |
| #define OHCI_ED_MPS_SHIFT 16 |
| #define OHCI_ED_MPS_MASK (0x7ff<<OHCI_ED_MPS_SHIFT) |
| |
| /* Flags in the head field of an Endpoint Desciptor. */ |
| #define OHCI_ED_H 1 |
| #define OHCI_ED_C 2 |
| |
| /* Bitfields for the first word of a Transfer Desciptor. */ |
| #define OHCI_TD_R (1<<18) |
| #define OHCI_TD_DP_SHIFT 19 |
| #define OHCI_TD_DP_MASK (3<<OHCI_TD_DP_SHIFT) |
| #define OHCI_TD_DI_SHIFT 21 |
| #define OHCI_TD_DI_MASK (7<<OHCI_TD_DI_SHIFT) |
| #define OHCI_TD_T0 (1<<24) |
| #define OHCI_TD_T1 (1<<24) |
| #define OHCI_TD_EC_SHIFT 26 |
| #define OHCI_TD_EC_MASK (3<<OHCI_TD_EC_SHIFT) |
| #define OHCI_TD_CC_SHIFT 28 |
| #define OHCI_TD_CC_MASK (0xf<<OHCI_TD_CC_SHIFT) |
| |
| /* Bitfields for the first word of an Isochronous Transfer Desciptor. */ |
| /* CC & DI - same as in the General Transfer Desciptor */ |
| #define OHCI_TD_SF_SHIFT 0 |
| #define OHCI_TD_SF_MASK (0xffff<<OHCI_TD_SF_SHIFT) |
| #define OHCI_TD_FC_SHIFT 24 |
| #define OHCI_TD_FC_MASK (7<<OHCI_TD_FC_SHIFT) |
| |
| /* Isochronous Transfer Desciptor - Offset / PacketStatusWord */ |
| #define OHCI_TD_PSW_CC_SHIFT 12 |
| #define OHCI_TD_PSW_CC_MASK (0xf<<OHCI_TD_PSW_CC_SHIFT) |
| #define OHCI_TD_PSW_SIZE_SHIFT 0 |
| #define OHCI_TD_PSW_SIZE_MASK (0xfff<<OHCI_TD_PSW_SIZE_SHIFT) |
| |
| #define OHCI_PAGE_MASK 0xfffff000 |
| #define OHCI_OFFSET_MASK 0xfff |
| |
| #define OHCI_DPTR_MASK 0xfffffff0 |
| |
| #define OHCI_BM(val, field) \ |
| (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT) |
| |
| #define OHCI_SET_BM(val, field, newval) do { \ |
| val &= ~OHCI_##field##_MASK; \ |
| val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ |
| } while(0) |
| |
| /* endpoint descriptor */ |
| struct ohci_ed { |
| uint32_t flags; |
| uint32_t tail; |
| uint32_t head; |
| uint32_t next; |
| }; |
| |
| /* General transfer descriptor */ |
| struct ohci_td { |
| uint32_t flags; |
| uint32_t cbp; |
| uint32_t next; |
| uint32_t be; |
| }; |
| |
| /* Isochronous transfer descriptor */ |
| struct ohci_iso_td { |
| uint32_t flags; |
| uint32_t bp; |
| uint32_t next; |
| uint32_t be; |
| uint16_t offset[8]; |
| }; |
| |
| #define USB_HZ 12000000 |
| |
| /* OHCI Local stuff */ |
| #define OHCI_CTL_CBSR ((1<<0)|(1<<1)) |
| #define OHCI_CTL_PLE (1<<2) |
| #define OHCI_CTL_IE (1<<3) |
| #define OHCI_CTL_CLE (1<<4) |
| #define OHCI_CTL_BLE (1<<5) |
| #define OHCI_CTL_HCFS ((1<<6)|(1<<7)) |
| #define OHCI_USB_RESET 0x00 |
| #define OHCI_USB_RESUME 0x40 |
| #define OHCI_USB_OPERATIONAL 0x80 |
| #define OHCI_USB_SUSPEND 0xc0 |
| #define OHCI_CTL_IR (1<<8) |
| #define OHCI_CTL_RWC (1<<9) |
| #define OHCI_CTL_RWE (1<<10) |
| |
| #define OHCI_STATUS_HCR (1<<0) |
| #define OHCI_STATUS_CLF (1<<1) |
| #define OHCI_STATUS_BLF (1<<2) |
| #define OHCI_STATUS_OCR (1<<3) |
| #define OHCI_STATUS_SOC ((1<<6)|(1<<7)) |
| |
| #define OHCI_INTR_SO (1<<0) /* Scheduling overrun */ |
| #define OHCI_INTR_WD (1<<1) /* HcDoneHead writeback */ |
| #define OHCI_INTR_SF (1<<2) /* Start of frame */ |
| #define OHCI_INTR_RD (1<<3) /* Resume detect */ |
| #define OHCI_INTR_UE (1<<4) /* Unrecoverable error */ |
| #define OHCI_INTR_FNO (1<<5) /* Frame number overflow */ |
| #define OHCI_INTR_RHSC (1<<6) /* Root hub status change */ |
| #define OHCI_INTR_OC (1<<30) /* Ownership change */ |
| #define OHCI_INTR_MIE (1<<31) /* Master Interrupt Enable */ |
| |
| #define OHCI_HCCA_SIZE 0x100 |
| #define OHCI_HCCA_MASK 0xffffff00 |
| |
| #define OHCI_EDPTR_MASK 0xfffffff0 |
| |
| #define OHCI_FMI_FI 0x00003fff |
| #define OHCI_FMI_FSMPS 0xffff0000 |
| #define OHCI_FMI_FIT 0x80000000 |
| |
| #define OHCI_FR_RT (1<<31) |
| |
| #define OHCI_LS_THRESH 0x628 |
| |
| #define OHCI_RHA_RW_MASK 0x00000000 /* Mask of supported features. */ |
| #define OHCI_RHA_PSM (1<<8) |
| #define OHCI_RHA_NPS (1<<9) |
| #define OHCI_RHA_DT (1<<10) |
| #define OHCI_RHA_OCPM (1<<11) |
| #define OHCI_RHA_NOCP (1<<12) |
| #define OHCI_RHA_POTPGT_MASK 0xff000000 |
| |
| #define OHCI_RHS_LPS (1<<0) |
| #define OHCI_RHS_OCI (1<<1) |
| #define OHCI_RHS_DRWE (1<<15) |
| #define OHCI_RHS_LPSC (1<<16) |
| #define OHCI_RHS_OCIC (1<<17) |
| #define OHCI_RHS_CRWE (1<<31) |
| |
| #define OHCI_PORT_CCS (1<<0) |
| #define OHCI_PORT_PES (1<<1) |
| #define OHCI_PORT_PSS (1<<2) |
| #define OHCI_PORT_POCI (1<<3) |
| #define OHCI_PORT_PRS (1<<4) |
| #define OHCI_PORT_PPS (1<<8) |
| #define OHCI_PORT_LSDA (1<<9) |
| #define OHCI_PORT_CSC (1<<16) |
| #define OHCI_PORT_PESC (1<<17) |
| #define OHCI_PORT_PSSC (1<<18) |
| #define OHCI_PORT_OCIC (1<<19) |
| #define OHCI_PORT_PRSC (1<<20) |
| #define OHCI_PORT_WTC (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ |
| |OHCI_PORT_OCIC|OHCI_PORT_PRSC) |
| |
| #define OHCI_TD_DIR_SETUP 0x0 |
| #define OHCI_TD_DIR_OUT 0x1 |
| #define OHCI_TD_DIR_IN 0x2 |
| #define OHCI_TD_DIR_RESERVED 0x3 |
| |
| #define OHCI_CC_NOERROR 0x0 |
| #define OHCI_CC_CRC 0x1 |
| #define OHCI_CC_BITSTUFFING 0x2 |
| #define OHCI_CC_DATATOGGLEMISMATCH 0x3 |
| #define OHCI_CC_STALL 0x4 |
| #define OHCI_CC_DEVICENOTRESPONDING 0x5 |
| #define OHCI_CC_PIDCHECKFAILURE 0x6 |
| #define OHCI_CC_UNDEXPETEDPID 0x7 |
| #define OHCI_CC_DATAOVERRUN 0x8 |
| #define OHCI_CC_DATAUNDERRUN 0x9 |
| #define OHCI_CC_BUFFEROVERRUN 0xc |
| #define OHCI_CC_BUFFERUNDERRUN 0xd |
| |
| #define OHCI_HRESET_FSBIR (1 << 0) |
| |
| /* Update IRQ levels */ |
| static inline void ohci_intr_update(OHCIState *ohci) |
| { |
| int level = 0; |
| |
| if ((ohci->intr & OHCI_INTR_MIE) && |
| (ohci->intr_status & ohci->intr)) |
| level = 1; |
| |
| qemu_set_irq(ohci->irq, level); |
| } |
| |
| /* Set an interrupt */ |
| static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) |
| { |
| ohci->intr_status |= intr; |
| ohci_intr_update(ohci); |
| } |
| |
| /* Attach or detach a device on a root hub port. */ |
| static void ohci_attach(USBPort *port1, USBDevice *dev) |
| { |
| OHCIState *s = port1->opaque; |
| OHCIPort *port = &s->rhport[port1->index]; |
| uint32_t old_state = port->ctrl; |
| |
| if (dev) { |
| if (port->port.dev) { |
| usb_attach(port1, NULL); |
| } |
| /* set connect status */ |
| port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; |
| |
| /* update speed */ |
| if (dev->speed == USB_SPEED_LOW) |
| port->ctrl |= OHCI_PORT_LSDA; |
| else |
| port->ctrl &= ~OHCI_PORT_LSDA; |
| port->port.dev = dev; |
| |
| /* notify of remote-wakeup */ |
| if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) |
| ohci_set_interrupt(s, OHCI_INTR_RD); |
| |
| /* send the attach message */ |
| usb_send_msg(dev, USB_MSG_ATTACH); |
| dprintf("usb-ohci: Attached port %d\n", port1->index); |
| } else { |
| /* set connect status */ |
| if (port->ctrl & OHCI_PORT_CCS) { |
| port->ctrl &= ~OHCI_PORT_CCS; |
| port->ctrl |= OHCI_PORT_CSC; |
| } |
| /* disable port */ |
| if (port->ctrl & OHCI_PORT_PES) { |
| port->ctrl &= ~OHCI_PORT_PES; |
| port->ctrl |= OHCI_PORT_PESC; |
| } |
| dev = port->port.dev; |
| if (dev) { |
| /* send the detach message */ |
| usb_send_msg(dev, USB_MSG_DETACH); |
| } |
| port->port.dev = NULL; |
| dprintf("usb-ohci: Detached port %d\n", port1->index); |
| } |
| |
| if (old_state != port->ctrl) |
| ohci_set_interrupt(s, OHCI_INTR_RHSC); |
| } |
| |
| /* Reset the controller */ |
| static void ohci_reset(void *opaque) |
| { |
| OHCIState *ohci = opaque; |
| OHCIPort *port; |
| int i; |
| |
| ohci_bus_stop(ohci); |
| ohci->ctl = 0; |
| ohci->old_ctl = 0; |
| ohci->status = 0; |
| ohci->intr_status = 0; |
| ohci->intr = OHCI_INTR_MIE; |
| |
| ohci->hcca = 0; |
| ohci->ctrl_head = ohci->ctrl_cur = 0; |
| ohci->bulk_head = ohci->bulk_cur = 0; |
| ohci->per_cur = 0; |
| ohci->done = 0; |
| ohci->done_count = 7; |
| |
| /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? |
| * I took the value linux sets ... |
| */ |
| ohci->fsmps = 0x2778; |
| ohci->fi = 0x2edf; |
| ohci->fit = 0; |
| ohci->frt = 0; |
| ohci->frame_number = 0; |
| ohci->pstart = 0; |
| ohci->lst = OHCI_LS_THRESH; |
| |
| ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; |
| ohci->rhdesc_b = 0x0; /* Impl. specific */ |
| ohci->rhstatus = 0; |
| |
| for (i = 0; i < ohci->num_ports; i++) |
| { |
| port = &ohci->rhport[i]; |
| port->ctrl = 0; |
| if (port->port.dev) |
| ohci_attach(&port->port, port->port.dev); |
| } |
| if (ohci->async_td) { |
| usb_cancel_packet(&ohci->usb_packet); |
| ohci->async_td = 0; |
| } |
| dprintf("usb-ohci: Reset %s\n", ohci->name); |
| } |
| |
| /* Get an array of dwords from main memory */ |
| static inline int get_dwords(uint32_t addr, uint32_t *buf, int num) |
| { |
| int i; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| cpu_physical_memory_rw(addr, (uint8_t *)buf, sizeof(*buf), 0); |
| *buf = le32_to_cpu(*buf); |
| } |
| |
| return 1; |
| } |
| |
| /* Put an array of dwords in to main memory */ |
| static inline int put_dwords(uint32_t addr, uint32_t *buf, int num) |
| { |
| int i; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| uint32_t tmp = cpu_to_le32(*buf); |
| cpu_physical_memory_rw(addr, (uint8_t *)&tmp, sizeof(tmp), 1); |
| } |
| |
| return 1; |
| } |
| |
| /* Get an array of words from main memory */ |
| static inline int get_words(uint32_t addr, uint16_t *buf, int num) |
| { |
| int i; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| cpu_physical_memory_rw(addr, (uint8_t *)buf, sizeof(*buf), 0); |
| *buf = le16_to_cpu(*buf); |
| } |
| |
| return 1; |
| } |
| |
| /* Put an array of words in to main memory */ |
| static inline int put_words(uint32_t addr, uint16_t *buf, int num) |
| { |
| int i; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| uint16_t tmp = cpu_to_le16(*buf); |
| cpu_physical_memory_rw(addr, (uint8_t *)&tmp, sizeof(tmp), 1); |
| } |
| |
| return 1; |
| } |
| |
| static inline int ohci_read_ed(uint32_t addr, struct ohci_ed *ed) |
| { |
| return get_dwords(addr, (uint32_t *)ed, sizeof(*ed) >> 2); |
| } |
| |
| static inline int ohci_read_td(uint32_t addr, struct ohci_td *td) |
| { |
| return get_dwords(addr, (uint32_t *)td, sizeof(*td) >> 2); |
| } |
| |
| static inline int ohci_read_iso_td(uint32_t addr, struct ohci_iso_td *td) |
| { |
| return (get_dwords(addr, (uint32_t *)td, 4) && |
| get_words(addr + 16, td->offset, 8)); |
| } |
| |
| static inline int ohci_put_ed(uint32_t addr, struct ohci_ed *ed) |
| { |
| return put_dwords(addr, (uint32_t *)ed, sizeof(*ed) >> 2); |
| } |
| |
| static inline int ohci_put_td(uint32_t addr, struct ohci_td *td) |
| { |
| return put_dwords(addr, (uint32_t *)td, sizeof(*td) >> 2); |
| } |
| |
| static inline int ohci_put_iso_td(uint32_t addr, struct ohci_iso_td *td) |
| { |
| return (put_dwords(addr, (uint32_t *)td, 4) && |
| put_words(addr + 16, td->offset, 8)); |
| } |
| |
| /* Read/Write the contents of a TD from/to main memory. */ |
| static void ohci_copy_td(struct ohci_td *td, uint8_t *buf, int len, int write) |
| { |
| uint32_t ptr; |
| uint32_t n; |
| |
| ptr = td->cbp; |
| n = 0x1000 - (ptr & 0xfff); |
| if (n > len) |
| n = len; |
| cpu_physical_memory_rw(ptr, buf, n, write); |
| if (n == len) |
| return; |
| ptr = td->be & ~0xfffu; |
| buf += n; |
| cpu_physical_memory_rw(ptr, buf, len - n, write); |
| } |
| |
| /* Read/Write the contents of an ISO TD from/to main memory. */ |
| static void ohci_copy_iso_td(uint32_t start_addr, uint32_t end_addr, |
| uint8_t *buf, int len, int write) |
| { |
| uint32_t ptr; |
| uint32_t n; |
| |
| ptr = start_addr; |
| n = 0x1000 - (ptr & 0xfff); |
| if (n > len) |
| n = len; |
| cpu_physical_memory_rw(ptr, buf, n, write); |
| if (n == len) |
| return; |
| ptr = end_addr & ~0xfffu; |
| buf += n; |
| cpu_physical_memory_rw(ptr, buf, len - n, write); |
| } |
| |
| static void ohci_process_lists(OHCIState *ohci, int completion); |
| |
| static void ohci_async_complete_packet(USBPacket *packet, void *opaque) |
| { |
| OHCIState *ohci = opaque; |
| #ifdef DEBUG_PACKET |
| dprintf("Async packet complete\n"); |
| #endif |
| ohci->async_complete = 1; |
| ohci_process_lists(ohci, 1); |
| } |
| |
| #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) |
| |
| static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, |
| int completion) |
| { |
| int dir; |
| size_t len = 0; |
| char *str = NULL; |
| int pid; |
| int ret; |
| int i; |
| USBDevice *dev; |
| struct ohci_iso_td iso_td; |
| uint32_t addr; |
| uint16_t starting_frame; |
| int16_t relative_frame_number; |
| int frame_count; |
| uint32_t start_offset, next_offset, end_offset = 0; |
| uint32_t start_addr, end_addr; |
| |
| addr = ed->head & OHCI_DPTR_MASK; |
| |
| if (!ohci_read_iso_td(addr, &iso_td)) { |
| printf("usb-ohci: ISO_TD read error at %x\n", addr); |
| return 0; |
| } |
| |
| starting_frame = OHCI_BM(iso_td.flags, TD_SF); |
| frame_count = OHCI_BM(iso_td.flags, TD_FC); |
| relative_frame_number = USUB(ohci->frame_number, starting_frame); |
| |
| #ifdef DEBUG_ISOCH |
| printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n" |
| "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" |
| "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" |
| "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" |
| "frame_number 0x%.8x starting_frame 0x%.8x\n" |
| "frame_count 0x%.8x relative %d\n" |
| "di 0x%.8x cc 0x%.8x\n", |
| ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, |
| iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, |
| iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3], |
| iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7], |
| ohci->frame_number, starting_frame, |
| frame_count, relative_frame_number, |
| OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC)); |
| #endif |
| |
| if (relative_frame_number < 0) { |
| dprintf("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number); |
| return 1; |
| } else if (relative_frame_number > frame_count) { |
| /* ISO TD expired - retire the TD to the Done Queue and continue with |
| the next ISO TD of the same ED */ |
| dprintf("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, |
| frame_count); |
| OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); |
| ed->head &= ~OHCI_DPTR_MASK; |
| ed->head |= (iso_td.next & OHCI_DPTR_MASK); |
| iso_td.next = ohci->done; |
| ohci->done = addr; |
| i = OHCI_BM(iso_td.flags, TD_DI); |
| if (i < ohci->done_count) |
| ohci->done_count = i; |
| ohci_put_iso_td(addr, &iso_td); |
| return 0; |
| } |
| |
| dir = OHCI_BM(ed->flags, ED_D); |
| switch (dir) { |
| case OHCI_TD_DIR_IN: |
| str = "in"; |
| pid = USB_TOKEN_IN; |
| break; |
| case OHCI_TD_DIR_OUT: |
| str = "out"; |
| pid = USB_TOKEN_OUT; |
| break; |
| case OHCI_TD_DIR_SETUP: |
| str = "setup"; |
| pid = USB_TOKEN_SETUP; |
| break; |
| default: |
| printf("usb-ohci: Bad direction %d\n", dir); |
| return 1; |
| } |
| |
| if (!iso_td.bp || !iso_td.be) { |
| printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be); |
| return 1; |
| } |
| |
| start_offset = iso_td.offset[relative_frame_number]; |
| next_offset = iso_td.offset[relative_frame_number + 1]; |
| |
| if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || |
| ((relative_frame_number < frame_count) && |
| !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { |
| printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n", |
| start_offset, next_offset); |
| return 1; |
| } |
| |
| if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { |
| printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n", |
| start_offset, next_offset); |
| return 1; |
| } |
| |
| if ((start_offset & 0x1000) == 0) { |
| start_addr = (iso_td.bp & OHCI_PAGE_MASK) | |
| (start_offset & OHCI_OFFSET_MASK); |
| } else { |
| start_addr = (iso_td.be & OHCI_PAGE_MASK) | |
| (start_offset & OHCI_OFFSET_MASK); |
| } |
| |
| if (relative_frame_number < frame_count) { |
| end_offset = next_offset - 1; |
| if ((end_offset & 0x1000) == 0) { |
| end_addr = (iso_td.bp & OHCI_PAGE_MASK) | |
| (end_offset & OHCI_OFFSET_MASK); |
| } else { |
| end_addr = (iso_td.be & OHCI_PAGE_MASK) | |
| (end_offset & OHCI_OFFSET_MASK); |
| } |
| } else { |
| /* Last packet in the ISO TD */ |
| end_addr = iso_td.be; |
| } |
| |
| if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { |
| len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 |
| - (start_addr & OHCI_OFFSET_MASK); |
| } else { |
| len = end_addr - start_addr + 1; |
| } |
| |
| if (len && dir != OHCI_TD_DIR_IN) { |
| ohci_copy_iso_td(start_addr, end_addr, ohci->usb_buf, len, 0); |
| } |
| |
| if (completion) { |
| ret = ohci->usb_packet.len; |
| } else { |
| ret = USB_RET_NODEV; |
| for (i = 0; i < ohci->num_ports; i++) { |
| dev = ohci->rhport[i].port.dev; |
| if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) |
| continue; |
| ohci->usb_packet.pid = pid; |
| ohci->usb_packet.devaddr = OHCI_BM(ed->flags, ED_FA); |
| ohci->usb_packet.devep = OHCI_BM(ed->flags, ED_EN); |
| ohci->usb_packet.data = ohci->usb_buf; |
| ohci->usb_packet.len = len; |
| ohci->usb_packet.complete_cb = ohci_async_complete_packet; |
| ohci->usb_packet.complete_opaque = ohci; |
| ret = dev->handle_packet(dev, &ohci->usb_packet); |
| if (ret != USB_RET_NODEV) |
| break; |
| } |
| |
| if (ret == USB_RET_ASYNC) { |
| return 1; |
| } |
| } |
| |
| #ifdef DEBUG_ISOCH |
| printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n", |
| start_offset, end_offset, start_addr, end_addr, str, len, ret); |
| #endif |
| |
| /* Writeback */ |
| if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { |
| /* IN transfer succeeded */ |
| ohci_copy_iso_td(start_addr, end_addr, ohci->usb_buf, ret, 1); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_NOERROR); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); |
| } else if (dir == OHCI_TD_DIR_OUT && ret == len) { |
| /* OUT transfer succeeded */ |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_NOERROR); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); |
| } else { |
| if (ret > (ssize_t) len) { |
| printf("usb-ohci: DataOverrun %d > %zu\n", ret, len); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_DATAOVERRUN); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, |
| len); |
| } else if (ret >= 0) { |
| printf("usb-ohci: DataUnderrun %d\n", ret); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_DATAUNDERRUN); |
| } else { |
| switch (ret) { |
| case USB_RET_NODEV: |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_DEVICENOTRESPONDING); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, |
| 0); |
| break; |
| case USB_RET_NAK: |
| case USB_RET_STALL: |
| printf("usb-ohci: got NAK/STALL %d\n", ret); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_STALL); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, |
| 0); |
| break; |
| default: |
| printf("usb-ohci: Bad device response %d\n", ret); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_UNDEXPETEDPID); |
| break; |
| } |
| } |
| } |
| |
| if (relative_frame_number == frame_count) { |
| /* Last data packet of ISO TD - retire the TD to the Done Queue */ |
| OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); |
| ed->head &= ~OHCI_DPTR_MASK; |
| ed->head |= (iso_td.next & OHCI_DPTR_MASK); |
| iso_td.next = ohci->done; |
| ohci->done = addr; |
| i = OHCI_BM(iso_td.flags, TD_DI); |
| if (i < ohci->done_count) |
| ohci->done_count = i; |
| } |
| ohci_put_iso_td(addr, &iso_td); |
| return 1; |
| } |
| |
| /* Service a transport descriptor. |
| Returns nonzero to terminate processing of this endpoint. */ |
| |
| static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) |
| { |
| int dir; |
| size_t len = 0; |
| char *str = NULL; |
| int pid; |
| int ret; |
| int i; |
| USBDevice *dev; |
| struct ohci_td td; |
| uint32_t addr; |
| int flag_r; |
| int completion; |
| |
| addr = ed->head & OHCI_DPTR_MASK; |
| /* See if this TD has already been submitted to the device. */ |
| completion = (addr == ohci->async_td); |
| if (completion && !ohci->async_complete) { |
| #ifdef DEBUG_PACKET |
| dprintf("Skipping async TD\n"); |
| #endif |
| return 1; |
| } |
| if (!ohci_read_td(addr, &td)) { |
| fprintf(stderr, "usb-ohci: TD read error at %x\n", addr); |
| return 0; |
| } |
| |
| dir = OHCI_BM(ed->flags, ED_D); |
| switch (dir) { |
| case OHCI_TD_DIR_OUT: |
| case OHCI_TD_DIR_IN: |
| /* Same value. */ |
| break; |
| default: |
| dir = OHCI_BM(td.flags, TD_DP); |
| break; |
| } |
| |
| switch (dir) { |
| case OHCI_TD_DIR_IN: |
| str = "in"; |
| pid = USB_TOKEN_IN; |
| break; |
| case OHCI_TD_DIR_OUT: |
| str = "out"; |
| pid = USB_TOKEN_OUT; |
| break; |
| case OHCI_TD_DIR_SETUP: |
| str = "setup"; |
| pid = USB_TOKEN_SETUP; |
| break; |
| default: |
| fprintf(stderr, "usb-ohci: Bad direction\n"); |
| return 1; |
| } |
| if (td.cbp && td.be) { |
| if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { |
| len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); |
| } else { |
| len = (td.be - td.cbp) + 1; |
| } |
| |
| if (len && dir != OHCI_TD_DIR_IN && !completion) { |
| ohci_copy_td(&td, ohci->usb_buf, len, 0); |
| } |
| } |
| |
| flag_r = (td.flags & OHCI_TD_R) != 0; |
| #ifdef DEBUG_PACKET |
| dprintf(" TD @ 0x%.8x %u bytes %s r=%d cbp=0x%.8x be=0x%.8x\n", |
| addr, len, str, flag_r, td.cbp, td.be); |
| |
| if (len > 0 && dir != OHCI_TD_DIR_IN) { |
| dprintf(" data:"); |
| for (i = 0; i < len; i++) |
| printf(" %.2x", ohci->usb_buf[i]); |
| dprintf("\n"); |
| } |
| #endif |
| if (completion) { |
| ret = ohci->usb_packet.len; |
| ohci->async_td = 0; |
| ohci->async_complete = 0; |
| } else { |
| ret = USB_RET_NODEV; |
| for (i = 0; i < ohci->num_ports; i++) { |
| dev = ohci->rhport[i].port.dev; |
| if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) |
| continue; |
| |
| if (ohci->async_td) { |
| /* ??? The hardware should allow one active packet per |
| endpoint. We only allow one active packet per controller. |
| This should be sufficient as long as devices respond in a |
| timely manner. |
| */ |
| #ifdef DEBUG_PACKET |
| dprintf("Too many pending packets\n"); |
| #endif |
| return 1; |
| } |
| ohci->usb_packet.pid = pid; |
| ohci->usb_packet.devaddr = OHCI_BM(ed->flags, ED_FA); |
| ohci->usb_packet.devep = OHCI_BM(ed->flags, ED_EN); |
| ohci->usb_packet.data = ohci->usb_buf; |
| ohci->usb_packet.len = len; |
| ohci->usb_packet.complete_cb = ohci_async_complete_packet; |
| ohci->usb_packet.complete_opaque = ohci; |
| ret = dev->handle_packet(dev, &ohci->usb_packet); |
| if (ret != USB_RET_NODEV) |
| break; |
| } |
| #ifdef DEBUG_PACKET |
| dprintf("ret=%d\n", ret); |
| #endif |
| if (ret == USB_RET_ASYNC) { |
| ohci->async_td = addr; |
| return 1; |
| } |
| } |
| if (ret >= 0) { |
| if (dir == OHCI_TD_DIR_IN) { |
| ohci_copy_td(&td, ohci->usb_buf, ret, 1); |
| #ifdef DEBUG_PACKET |
| dprintf(" data:"); |
| for (i = 0; i < ret; i++) |
| printf(" %.2x", ohci->usb_buf[i]); |
| dprintf("\n"); |
| #endif |
| } else { |
| ret = len; |
| } |
| } |
| |
| /* Writeback */ |
| if (ret == len || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { |
| /* Transmission succeeded. */ |
| if (ret == len) { |
| td.cbp = 0; |
| } else { |
| td.cbp += ret; |
| if ((td.cbp & 0xfff) + ret > 0xfff) { |
| td.cbp &= 0xfff; |
| td.cbp |= td.be & ~0xfff; |
| } |
| } |
| td.flags |= OHCI_TD_T1; |
| td.flags ^= OHCI_TD_T0; |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); |
| OHCI_SET_BM(td.flags, TD_EC, 0); |
| |
| ed->head &= ~OHCI_ED_C; |
| if (td.flags & OHCI_TD_T0) |
| ed->head |= OHCI_ED_C; |
| } else { |
| if (ret >= 0) { |
| dprintf("usb-ohci: Underrun\n"); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); |
| } else { |
| switch (ret) { |
| case USB_RET_NODEV: |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); |
| case USB_RET_NAK: |
| dprintf("usb-ohci: got NAK\n"); |
| return 1; |
| case USB_RET_STALL: |
| dprintf("usb-ohci: got STALL\n"); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); |
| break; |
| case USB_RET_BABBLE: |
| dprintf("usb-ohci: got BABBLE\n"); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); |
| break; |
| default: |
| fprintf(stderr, "usb-ohci: Bad device response %d\n", ret); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); |
| OHCI_SET_BM(td.flags, TD_EC, 3); |
| break; |
| } |
| } |
| ed->head |= OHCI_ED_H; |
| } |
| |
| /* Retire this TD */ |
| ed->head &= ~OHCI_DPTR_MASK; |
| ed->head |= td.next & OHCI_DPTR_MASK; |
| td.next = ohci->done; |
| ohci->done = addr; |
| i = OHCI_BM(td.flags, TD_DI); |
| if (i < ohci->done_count) |
| ohci->done_count = i; |
| ohci_put_td(addr, &td); |
| return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; |
| } |
| |
| /* Service an endpoint list. Returns nonzero if active TD were found. */ |
| static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) |
| { |
| struct ohci_ed ed; |
| uint32_t next_ed; |
| uint32_t cur; |
| int active; |
| |
| active = 0; |
| |
| if (head == 0) |
| return 0; |
| |
| for (cur = head; cur; cur = next_ed) { |
| if (!ohci_read_ed(cur, &ed)) { |
| fprintf(stderr, "usb-ohci: ED read error at %x\n", cur); |
| return 0; |
| } |
| |
| next_ed = ed.next & OHCI_DPTR_MASK; |
| |
| if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { |
| uint32_t addr; |
| /* Cancel pending packets for ED that have been paused. */ |
| addr = ed.head & OHCI_DPTR_MASK; |
| if (ohci->async_td && addr == ohci->async_td) { |
| usb_cancel_packet(&ohci->usb_packet); |
| ohci->async_td = 0; |
| } |
| continue; |
| } |
| |
| while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { |
| #ifdef DEBUG_PACKET |
| dprintf("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u " |
| "h=%u c=%u\n head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur, |
| OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), |
| OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, |
| (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, |
| OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0, |
| (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, |
| ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); |
| #endif |
| active = 1; |
| |
| if ((ed.flags & OHCI_ED_F) == 0) { |
| if (ohci_service_td(ohci, &ed)) |
| break; |
| } else { |
| /* Handle isochronous endpoints */ |
| if (ohci_service_iso_td(ohci, &ed, completion)) |
| break; |
| } |
| } |
| |
| ohci_put_ed(cur, &ed); |
| } |
| |
| return active; |
| } |
| |
| /* Generate a SOF event, and set a timer for EOF */ |
| static void ohci_sof(OHCIState *ohci) |
| { |
| ohci->sof_time = qemu_get_clock(vm_clock); |
| qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time); |
| ohci_set_interrupt(ohci, OHCI_INTR_SF); |
| } |
| |
| /* Process Control and Bulk lists. */ |
| static void ohci_process_lists(OHCIState *ohci, int completion) |
| { |
| if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { |
| if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) |
| dprintf("usb-ohci: head %x, cur %x\n", |
| ohci->ctrl_head, ohci->ctrl_cur); |
| if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { |
| ohci->ctrl_cur = 0; |
| ohci->status &= ~OHCI_STATUS_CLF; |
| } |
| } |
| |
| if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { |
| if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { |
| ohci->bulk_cur = 0; |
| ohci->status &= ~OHCI_STATUS_BLF; |
| } |
| } |
| } |
| |
| /* Do frame processing on frame boundary */ |
| static void ohci_frame_boundary(void *opaque) |
| { |
| OHCIState *ohci = opaque; |
| struct ohci_hcca hcca; |
| |
| cpu_physical_memory_rw(ohci->hcca, (uint8_t *)&hcca, sizeof(hcca), 0); |
| |
| /* Process all the lists at the end of the frame */ |
| if (ohci->ctl & OHCI_CTL_PLE) { |
| int n; |
| |
| n = ohci->frame_number & 0x1f; |
| ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); |
| } |
| |
| /* Cancel all pending packets if either of the lists has been disabled. */ |
| if (ohci->async_td && |
| ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { |
| usb_cancel_packet(&ohci->usb_packet); |
| ohci->async_td = 0; |
| } |
| ohci->old_ctl = ohci->ctl; |
| ohci_process_lists(ohci, 0); |
| |
| /* Frame boundary, so do EOF stuf here */ |
| ohci->frt = ohci->fit; |
| |
| /* XXX: endianness */ |
| ohci->frame_number = (ohci->frame_number + 1) & 0xffff; |
| hcca.frame = cpu_to_le32(ohci->frame_number); |
| |
| if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { |
| if (!ohci->done) |
| abort(); |
| if (ohci->intr & ohci->intr_status) |
| ohci->done |= 1; |
| hcca.done = cpu_to_le32(ohci->done); |
| ohci->done = 0; |
| ohci->done_count = 7; |
| ohci_set_interrupt(ohci, OHCI_INTR_WD); |
| } |
| |
| if (ohci->done_count != 7 && ohci->done_count != 0) |
| ohci->done_count--; |
| |
| /* Do SOF stuff here */ |
| ohci_sof(ohci); |
| |
| /* Writeback HCCA */ |
| cpu_physical_memory_rw(ohci->hcca, (uint8_t *)&hcca, sizeof(hcca), 1); |
| } |
| |
| /* Start sending SOF tokens across the USB bus, lists are processed in |
| * next frame |
| */ |
| static int ohci_bus_start(OHCIState *ohci) |
| { |
| ohci->eof_timer = qemu_new_timer(vm_clock, |
| ohci_frame_boundary, |
| ohci); |
| |
| if (ohci->eof_timer == NULL) { |
| fprintf(stderr, "usb-ohci: %s: qemu_new_timer failed\n", ohci->name); |
| /* TODO: Signal unrecoverable error */ |
| return 0; |
| } |
| |
| dprintf("usb-ohci: %s: USB Operational\n", ohci->name); |
| |
| ohci_sof(ohci); |
| |
| return 1; |
| } |
| |
| /* Stop sending SOF tokens on the bus */ |
| static void ohci_bus_stop(OHCIState *ohci) |
| { |
| if (ohci->eof_timer) |
| qemu_del_timer(ohci->eof_timer); |
| ohci->eof_timer = NULL; |
| } |
| |
| /* Sets a flag in a port status register but only set it if the port is |
| * connected, if not set ConnectStatusChange flag. If flag is enabled |
| * return 1. |
| */ |
| static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) |
| { |
| int ret = 1; |
| |
| /* writing a 0 has no effect */ |
| if (val == 0) |
| return 0; |
| |
| /* If CurrentConnectStatus is cleared we set |
| * ConnectStatusChange |
| */ |
| if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { |
| ohci->rhport[i].ctrl |= OHCI_PORT_CSC; |
| if (ohci->rhstatus & OHCI_RHS_DRWE) { |
| /* TODO: CSC is a wakeup event */ |
| } |
| return 0; |
| } |
| |
| if (ohci->rhport[i].ctrl & val) |
| ret = 0; |
| |
| /* set the bit */ |
| ohci->rhport[i].ctrl |= val; |
| |
| return ret; |
| } |
| |
| /* Set the frame interval - frame interval toggle is manipulated by the hcd only */ |
| static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) |
| { |
| val &= OHCI_FMI_FI; |
| |
| if (val != ohci->fi) { |
| dprintf("usb-ohci: %s: FrameInterval = 0x%x (%u)\n", |
| ohci->name, ohci->fi, ohci->fi); |
| } |
| |
| ohci->fi = val; |
| } |
| |
| static void ohci_port_power(OHCIState *ohci, int i, int p) |
| { |
| if (p) { |
| ohci->rhport[i].ctrl |= OHCI_PORT_PPS; |
| } else { |
| ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| |
| OHCI_PORT_CCS| |
| OHCI_PORT_PSS| |
| OHCI_PORT_PRS); |
| } |
| } |
| |
| /* Set HcControlRegister */ |
| static void ohci_set_ctl(OHCIState *ohci, uint32_t val) |
| { |
| uint32_t old_state; |
| uint32_t new_state; |
| |
| old_state = ohci->ctl & OHCI_CTL_HCFS; |
| ohci->ctl = val; |
| new_state = ohci->ctl & OHCI_CTL_HCFS; |
| |
| /* no state change */ |
| if (old_state == new_state) |
| return; |
| |
| switch (new_state) { |
| case OHCI_USB_OPERATIONAL: |
| ohci_bus_start(ohci); |
| break; |
| case OHCI_USB_SUSPEND: |
| ohci_bus_stop(ohci); |
| dprintf("usb-ohci: %s: USB Suspended\n", ohci->name); |
| break; |
| case OHCI_USB_RESUME: |
| dprintf("usb-ohci: %s: USB Resume\n", ohci->name); |
| break; |
| case OHCI_USB_RESET: |
| ohci_reset(ohci); |
| dprintf("usb-ohci: %s: USB Reset\n", ohci->name); |
| break; |
| } |
| } |
| |
| static uint32_t ohci_get_frame_remaining(OHCIState *ohci) |
| { |
| uint16_t fr; |
| int64_t tks; |
| |
| if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) |
| return (ohci->frt << 31); |
| |
| /* Being in USB operational state guarnatees sof_time was |
| * set already. |
| */ |
| tks = qemu_get_clock(vm_clock) - ohci->sof_time; |
| |
| /* avoid muldiv if possible */ |
| if (tks >= usb_frame_time) |
| return (ohci->frt << 31); |
| |
| tks = muldiv64(1, tks, usb_bit_time); |
| fr = (uint16_t)(ohci->fi - tks); |
| |
| return (ohci->frt << 31) | fr; |
| } |
| |
| |
| /* Set root hub status */ |
| static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) |
| { |
| uint32_t old_state; |
| |
| old_state = ohci->rhstatus; |
| |
| /* write 1 to clear OCIC */ |
| if (val & OHCI_RHS_OCIC) |
| ohci->rhstatus &= ~OHCI_RHS_OCIC; |
| |
| if (val & OHCI_RHS_LPS) { |
| int i; |
| |
| for (i = 0; i < ohci->num_ports; i++) |
| ohci_port_power(ohci, i, 0); |
| dprintf("usb-ohci: powered down all ports\n"); |
| } |
| |
| if (val & OHCI_RHS_LPSC) { |
| int i; |
| |
| for (i = 0; i < ohci->num_ports; i++) |
| ohci_port_power(ohci, i, 1); |
| dprintf("usb-ohci: powered up all ports\n"); |
| } |
| |
| if (val & OHCI_RHS_DRWE) |
| ohci->rhstatus |= OHCI_RHS_DRWE; |
| |
| if (val & OHCI_RHS_CRWE) |
| ohci->rhstatus &= ~OHCI_RHS_DRWE; |
| |
| if (old_state != ohci->rhstatus) |
| ohci_set_interrupt(ohci, OHCI_INTR_RHSC); |
| } |
| |
| /* Set root hub port status */ |
| static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) |
| { |
| uint32_t old_state; |
| OHCIPort *port; |
| |
| port = &ohci->rhport[portnum]; |
| old_state = port->ctrl; |
| |
| /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ |
| if (val & OHCI_PORT_WTC) |
| port->ctrl &= ~(val & OHCI_PORT_WTC); |
| |
| if (val & OHCI_PORT_CCS) |
| port->ctrl &= ~OHCI_PORT_PES; |
| |
| ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); |
| |
| if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) |
| dprintf("usb-ohci: port %d: SUSPEND\n", portnum); |
| |
| if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { |
| dprintf("usb-ohci: port %d: RESET\n", portnum); |
| usb_send_msg(port->port.dev, USB_MSG_RESET); |
| port->ctrl &= ~OHCI_PORT_PRS; |
| /* ??? Should this also set OHCI_PORT_PESC. */ |
| port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; |
| } |
| |
| /* Invert order here to ensure in ambiguous case, device is |
| * powered up... |
| */ |
| if (val & OHCI_PORT_LSDA) |
| ohci_port_power(ohci, portnum, 0); |
| if (val & OHCI_PORT_PPS) |
| ohci_port_power(ohci, portnum, 1); |
| |
| if (old_state != port->ctrl) |
| ohci_set_interrupt(ohci, OHCI_INTR_RHSC); |
| |
| return; |
| } |
| |
| static uint32_t ohci_mem_read(void *ptr, target_phys_addr_t addr) |
| { |
| OHCIState *ohci = ptr; |
| |
| addr -= ohci->mem_base; |
| |
| /* Only aligned reads are allowed on OHCI */ |
| if (addr & 3) { |
| fprintf(stderr, "usb-ohci: Mis-aligned read\n"); |
| return 0xffffffff; |
| } |
| |
| if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { |
| /* HcRhPortStatus */ |
| return ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; |
| } |
| |
| switch (addr >> 2) { |
| case 0: /* HcRevision */ |
| return 0x10; |
| |
| case 1: /* HcControl */ |
| return ohci->ctl; |
| |
| case 2: /* HcCommandStatus */ |
| return ohci->status; |
| |
| case 3: /* HcInterruptStatus */ |
| return ohci->intr_status; |
| |
| case 4: /* HcInterruptEnable */ |
| case 5: /* HcInterruptDisable */ |
| return ohci->intr; |
| |
| case 6: /* HcHCCA */ |
| return ohci->hcca; |
| |
| case 7: /* HcPeriodCurrentED */ |
| return ohci->per_cur; |
| |
| case 8: /* HcControlHeadED */ |
| return ohci->ctrl_head; |
| |
| case 9: /* HcControlCurrentED */ |
| return ohci->ctrl_cur; |
| |
| case 10: /* HcBulkHeadED */ |
| return ohci->bulk_head; |
| |
| case 11: /* HcBulkCurrentED */ |
| return ohci->bulk_cur; |
| |
| case 12: /* HcDoneHead */ |
| return ohci->done; |
| |
| case 13: /* HcFmInterval */ |
| return (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); |
| |
| case 14: /* HcFmRemaining */ |
| return ohci_get_frame_remaining(ohci); |
| |
| case 15: /* HcFmNumber */ |
| return ohci->frame_number; |
| |
| case 16: /* HcPeriodicStart */ |
| return ohci->pstart; |
| |
| case 17: /* HcLSThreshold */ |
| return ohci->lst; |
| |
| case 18: /* HcRhDescriptorA */ |
| return ohci->rhdesc_a; |
| |
| case 19: /* HcRhDescriptorB */ |
| return ohci->rhdesc_b; |
| |
| case 20: /* HcRhStatus */ |
| return ohci->rhstatus; |
| |
| /* PXA27x specific registers */ |
| case 24: /* HcStatus */ |
| return ohci->hstatus & ohci->hmask; |
| |
| case 25: /* HcHReset */ |
| return ohci->hreset; |
| |
| case 26: /* HcHInterruptEnable */ |
| return ohci->hmask; |
| |
| case 27: /* HcHInterruptTest */ |
| return ohci->htest; |
| |
| default: |
| fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr); |
| return 0xffffffff; |
| } |
| } |
| |
| static void ohci_mem_write(void *ptr, target_phys_addr_t addr, uint32_t val) |
| { |
| OHCIState *ohci = ptr; |
| |
| addr -= ohci->mem_base; |
| |
| /* Only aligned reads are allowed on OHCI */ |
| if (addr & 3) { |
| fprintf(stderr, "usb-ohci: Mis-aligned write\n"); |
| return; |
| } |
| |
| if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { |
| /* HcRhPortStatus */ |
| ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); |
| return; |
| } |
| |
| switch (addr >> 2) { |
| case 1: /* HcControl */ |
| ohci_set_ctl(ohci, val); |
| break; |
| |
| case 2: /* HcCommandStatus */ |
| /* SOC is read-only */ |
| val = (val & ~OHCI_STATUS_SOC); |
| |
| /* Bits written as '0' remain unchanged in the register */ |
| ohci->status |= val; |
| |
| if (ohci->status & OHCI_STATUS_HCR) |
| ohci_reset(ohci); |
| break; |
| |
| case 3: /* HcInterruptStatus */ |
| ohci->intr_status &= ~val; |
| ohci_intr_update(ohci); |
| break; |
| |
| case 4: /* HcInterruptEnable */ |
| ohci->intr |= val; |
| ohci_intr_update(ohci); |
| break; |
| |
| case 5: /* HcInterruptDisable */ |
| ohci->intr &= ~val; |
| ohci_intr_update(ohci); |
| break; |
| |
| case 6: /* HcHCCA */ |
| ohci->hcca = val & OHCI_HCCA_MASK; |
| break; |
| |
| case 8: /* HcControlHeadED */ |
| ohci->ctrl_head = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 9: /* HcControlCurrentED */ |
| ohci->ctrl_cur = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 10: /* HcBulkHeadED */ |
| ohci->bulk_head = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 11: /* HcBulkCurrentED */ |
| ohci->bulk_cur = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 13: /* HcFmInterval */ |
| ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; |
| ohci->fit = (val & OHCI_FMI_FIT) >> 31; |
| ohci_set_frame_interval(ohci, val); |
| break; |
| |
| case 15: /* HcFmNumber */ |
| break; |
| |
| case 16: /* HcPeriodicStart */ |
| ohci->pstart = val & 0xffff; |
| break; |
| |
| case 17: /* HcLSThreshold */ |
| ohci->lst = val & 0xffff; |
| break; |
| |
| case 18: /* HcRhDescriptorA */ |
| ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; |
| ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; |
| break; |
| |
| case 19: /* HcRhDescriptorB */ |
| break; |
| |
| case 20: /* HcRhStatus */ |
| ohci_set_hub_status(ohci, val); |
| break; |
| |
| /* PXA27x specific registers */ |
| case 24: /* HcStatus */ |
| ohci->hstatus &= ~(val & ohci->hmask); |
| |
| case 25: /* HcHReset */ |
| ohci->hreset = val & ~OHCI_HRESET_FSBIR; |
| if (val & OHCI_HRESET_FSBIR) |
| ohci_reset(ohci); |
| break; |
| |
| case 26: /* HcHInterruptEnable */ |
| ohci->hmask = val; |
| break; |
| |
| case 27: /* HcHInterruptTest */ |
| ohci->htest = val; |
| break; |
| |
| default: |
| fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr); |
| break; |
| } |
| } |
| |
| /* Only dword reads are defined on OHCI register space */ |
| static CPUReadMemoryFunc *ohci_readfn[3]={ |
| ohci_mem_read, |
| ohci_mem_read, |
| ohci_mem_read |
| }; |
| |
| /* Only dword writes are defined on OHCI register space */ |
| static CPUWriteMemoryFunc *ohci_writefn[3]={ |
| ohci_mem_write, |
| ohci_mem_write, |
| ohci_mem_write |
| }; |
| |
| static void usb_ohci_init(OHCIState *ohci, int num_ports, int devfn, |
| qemu_irq irq, enum ohci_type type, const char *name) |
| { |
| int i; |
| |
| if (usb_frame_time == 0) { |
| #if OHCI_TIME_WARP |
| usb_frame_time = ticks_per_sec; |
| usb_bit_time = muldiv64(1, ticks_per_sec, USB_HZ/1000); |
| #else |
| usb_frame_time = muldiv64(1, ticks_per_sec, 1000); |
| if (ticks_per_sec >= USB_HZ) { |
| usb_bit_time = muldiv64(1, ticks_per_sec, USB_HZ); |
| } else { |
| usb_bit_time = 1; |
| } |
| #endif |
| dprintf("usb-ohci: usb_bit_time=%lli usb_frame_time=%lli\n", |
| usb_frame_time, usb_bit_time); |
| } |
| |
| ohci->mem = cpu_register_io_memory(0, ohci_readfn, ohci_writefn, ohci); |
| ohci->name = name; |
| |
| ohci->irq = irq; |
| ohci->type = type; |
| |
| ohci->num_ports = num_ports; |
| for (i = 0; i < num_ports; i++) { |
| qemu_register_usb_port(&ohci->rhport[i].port, ohci, i, ohci_attach); |
| } |
| |
| ohci->async_td = 0; |
| qemu_register_reset(ohci_reset, ohci); |
| ohci_reset(ohci); |
| } |
| |
| typedef struct { |
| PCIDevice pci_dev; |
| OHCIState state; |
| } OHCIPCIState; |
| |
| static void ohci_mapfunc(PCIDevice *pci_dev, int i, |
| uint32_t addr, uint32_t size, int type) |
| { |
| OHCIPCIState *ohci = (OHCIPCIState *)pci_dev; |
| ohci->state.mem_base = addr; |
| cpu_register_physical_memory(addr, size, ohci->state.mem); |
| } |
| |
| void usb_ohci_init_pci(struct PCIBus *bus, int num_ports, int devfn) |
| { |
| OHCIPCIState *ohci; |
| int vid = 0x106b; |
| int did = 0x003f; |
| |
| ohci = (OHCIPCIState *)pci_register_device(bus, "OHCI USB", sizeof(*ohci), |
| devfn, NULL, NULL); |
| if (ohci == NULL) { |
| fprintf(stderr, "usb-ohci: Failed to register PCI device\n"); |
| return; |
| } |
| |
| ohci->pci_dev.config[0x00] = vid & 0xff; |
| ohci->pci_dev.config[0x01] = (vid >> 8) & 0xff; |
| ohci->pci_dev.config[0x02] = did & 0xff; |
| ohci->pci_dev.config[0x03] = (did >> 8) & 0xff; |
| ohci->pci_dev.config[0x09] = 0x10; /* OHCI */ |
| ohci->pci_dev.config[0x0a] = 0x3; |
| ohci->pci_dev.config[0x0b] = 0xc; |
| ohci->pci_dev.config[0x3d] = 0x01; /* interrupt pin 1 */ |
| |
| usb_ohci_init(&ohci->state, num_ports, devfn, ohci->pci_dev.irq[0], |
| OHCI_TYPE_PCI, ohci->pci_dev.name); |
| |
| pci_register_io_region((struct PCIDevice *)ohci, 0, 256, |
| PCI_ADDRESS_SPACE_MEM, ohci_mapfunc); |
| } |
| |
| void usb_ohci_init_pxa(target_phys_addr_t base, int num_ports, int devfn, |
| qemu_irq irq) |
| { |
| OHCIState *ohci = (OHCIState *)qemu_mallocz(sizeof(OHCIState)); |
| |
| usb_ohci_init(ohci, num_ports, devfn, irq, |
| OHCI_TYPE_PXA, "OHCI USB"); |
| ohci->mem_base = base; |
| |
| cpu_register_physical_memory(ohci->mem_base, 0x1000, ohci->mem); |
| } |
