| #ifndef QEMU_I2C_H |
| #define QEMU_I2C_H |
| |
| /* The QEMU I2C implementation only supports simple transfers that complete |
| immediately. It does not support slave devices that need to be able to |
| defer their response (eg. CPU slave interfaces where the data is supplied |
| by the device driver in response to an interrupt). */ |
| |
| enum i2c_event { |
| I2C_START_RECV, |
| I2C_START_SEND, |
| I2C_FINISH, |
| I2C_NACK /* Masker NACKed a receive byte. */ |
| }; |
| |
| /* Master to slave. */ |
| typedef int (*i2c_send_cb)(i2c_slave *s, uint8_t data); |
| /* Slave to master. */ |
| typedef int (*i2c_recv_cb)(i2c_slave *s); |
| /* Notify the slave of a bus state change. */ |
| typedef void (*i2c_event_cb)(i2c_slave *s, enum i2c_event event); |
| |
| struct i2c_slave |
| { |
| /* Callbacks to be set by the device. */ |
| i2c_event_cb event; |
| i2c_recv_cb recv; |
| i2c_send_cb send; |
| |
| /* Remaining fields for internal use by the I2C code. */ |
| int address; |
| void *next; |
| }; |
| |
| i2c_bus *i2c_init_bus(void); |
| i2c_slave *i2c_slave_init(i2c_bus *bus, int address, int size); |
| void i2c_set_slave_address(i2c_slave *dev, int address); |
| int i2c_bus_busy(i2c_bus *bus); |
| int i2c_start_transfer(i2c_bus *bus, int address, int recv); |
| void i2c_end_transfer(i2c_bus *bus); |
| void i2c_nack(i2c_bus *bus); |
| int i2c_send(i2c_bus *bus, uint8_t data); |
| int i2c_recv(i2c_bus *bus); |
| void i2c_bus_save(QEMUFile *f, i2c_bus *bus); |
| void i2c_bus_load(QEMUFile *f, i2c_bus *bus); |
| void i2c_slave_save(QEMUFile *f, i2c_slave *dev); |
| void i2c_slave_load(QEMUFile *f, i2c_slave *dev); |
| |
| /* max111x.c */ |
| struct max111x_s; |
| uint32_t max111x_read(void *opaque); |
| void max111x_write(void *opaque, uint32_t value); |
| struct max111x_s *max1110_init(qemu_irq cb); |
| struct max111x_s *max1111_init(qemu_irq cb); |
| void max111x_set_input(struct max111x_s *s, int line, uint8_t value); |
| |
| /* max7310.c */ |
| i2c_slave *max7310_init(i2c_bus *bus); |
| void max7310_reset(i2c_slave *i2c); |
| qemu_irq *max7310_gpio_in_get(i2c_slave *i2c); |
| void max7310_gpio_out_set(i2c_slave *i2c, int line, qemu_irq handler); |
| |
| /* wm8750.c */ |
| i2c_slave *wm8750_init(i2c_bus *bus, AudioState *audio); |
| void wm8750_reset(i2c_slave *i2c); |
| void wm8750_data_req_set(i2c_slave *i2c, |
| void (*data_req)(void *, int, int), void *opaque); |
| void wm8750_dac_dat(void *opaque, uint32_t sample); |
| uint32_t wm8750_adc_dat(void *opaque); |
| |
| /* ssd0303.c */ |
| void ssd0303_init(DisplayState *ds, i2c_bus *bus, int address); |
| |
| #endif |