| /* |
| * QEMU ATI SVGA emulation |
| * |
| * Copyright (c) 2019 BALATON Zoltan |
| * |
| * This work is licensed under the GNU GPL license version 2 or later. |
| */ |
| |
| /* |
| * WARNING: |
| * This is very incomplete and only enough for Linux console and some |
| * unaccelerated X output at the moment. |
| * Currently it's little more than a frame buffer with minimal functions, |
| * other more advanced features of the hardware are yet to be implemented. |
| * We only aim for Rage 128 Pro (and some RV100) and 2D only at first, |
| * No 3D at all yet (maybe after 2D works, but feel free to improve it) |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "ati_int.h" |
| #include "ati_regs.h" |
| #include "vga-access.h" |
| #include "hw/qdev-properties.h" |
| #include "vga_regs.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "ui/console.h" |
| #include "hw/display/i2c-ddc.h" |
| #include "trace.h" |
| |
| #define ATI_DEBUG_HW_CURSOR 0 |
| |
| #ifdef CONFIG_PIXMAN |
| #define DEFAULT_X_PIXMAN 3 |
| #else |
| #define DEFAULT_X_PIXMAN 0 |
| #endif |
| |
| static const struct { |
| const char *name; |
| uint16_t dev_id; |
| } ati_model_aliases[] = { |
| { "rage128p", PCI_DEVICE_ID_ATI_RAGE128_PF }, |
| { "rv100", PCI_DEVICE_ID_ATI_RADEON_QY }, |
| }; |
| |
| enum { VGA_MODE, EXT_MODE }; |
| |
| static void ati_vga_switch_mode(ATIVGAState *s) |
| { |
| DPRINTF("%d -> %d\n", |
| s->mode, !!(s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN)); |
| if (s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN) { |
| /* Extended mode enabled */ |
| s->mode = EXT_MODE; |
| if (s->regs.crtc_gen_cntl & CRTC2_EN) { |
| /* CRT controller enabled, use CRTC values */ |
| /* FIXME Should these be the same as VGA CRTC regs? */ |
| uint32_t offs = s->regs.crtc_offset & 0x07ffffff; |
| int stride = (s->regs.crtc_pitch & 0x7ff) * 8; |
| int bpp = 0; |
| int h, v; |
| |
| if (s->regs.crtc_h_total_disp == 0) { |
| s->regs.crtc_h_total_disp = ((640 / 8) - 1) << 16; |
| } |
| if (s->regs.crtc_v_total_disp == 0) { |
| s->regs.crtc_v_total_disp = (480 - 1) << 16; |
| } |
| h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; |
| v = (s->regs.crtc_v_total_disp >> 16) + 1; |
| switch (s->regs.crtc_gen_cntl & CRTC_PIX_WIDTH_MASK) { |
| case CRTC_PIX_WIDTH_4BPP: |
| bpp = 4; |
| break; |
| case CRTC_PIX_WIDTH_8BPP: |
| bpp = 8; |
| break; |
| case CRTC_PIX_WIDTH_15BPP: |
| bpp = 15; |
| break; |
| case CRTC_PIX_WIDTH_16BPP: |
| bpp = 16; |
| break; |
| case CRTC_PIX_WIDTH_24BPP: |
| bpp = 24; |
| break; |
| case CRTC_PIX_WIDTH_32BPP: |
| bpp = 32; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "Unsupported bpp value\n"); |
| return; |
| } |
| DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs); |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); |
| vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); |
| s->vga.big_endian_fb = (s->regs.config_cntl & APER_0_ENDIAN || |
| s->regs.config_cntl & APER_1_ENDIAN ? |
| true : false); |
| /* reset VBE regs then set up mode */ |
| s->vga.vbe_regs[VBE_DISPI_INDEX_XRES] = h; |
| s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] = v; |
| s->vga.vbe_regs[VBE_DISPI_INDEX_BPP] = bpp; |
| /* enable mode via ioport so it updates vga regs */ |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); |
| vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_ENABLED | |
| VBE_DISPI_LFB_ENABLED | VBE_DISPI_NOCLEARMEM | |
| (s->regs.dac_cntl & DAC_8BIT_EN ? VBE_DISPI_8BIT_DAC : 0)); |
| /* now set offset and stride after enable as that resets these */ |
| if (stride) { |
| int bypp = DIV_ROUND_UP(bpp, BITS_PER_BYTE); |
| |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_VIRT_WIDTH); |
| vbe_ioport_write_data(&s->vga, 0, stride); |
| stride *= bypp; |
| if (offs % stride) { |
| DPRINTF("CRTC offset is not multiple of pitch\n"); |
| vbe_ioport_write_index(&s->vga, 0, |
| VBE_DISPI_INDEX_X_OFFSET); |
| vbe_ioport_write_data(&s->vga, 0, offs % stride / bypp); |
| } |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_Y_OFFSET); |
| vbe_ioport_write_data(&s->vga, 0, offs / stride); |
| DPRINTF("VBE offset (%d,%d), vbe_start_addr=%x\n", |
| s->vga.vbe_regs[VBE_DISPI_INDEX_X_OFFSET], |
| s->vga.vbe_regs[VBE_DISPI_INDEX_Y_OFFSET], |
| s->vga.vbe_start_addr); |
| } |
| } |
| } else { |
| /* VGA mode enabled */ |
| s->mode = VGA_MODE; |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); |
| vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); |
| } |
| } |
| |
| /* Used by host side hardware cursor */ |
| static void ati_cursor_define(ATIVGAState *s) |
| { |
| uint8_t data[1024]; |
| uint32_t srcoff; |
| int i, j, idx = 0; |
| |
| if ((s->regs.cur_offset & BIT(31)) || s->cursor_guest_mode) { |
| return; /* Do not update cursor if locked or rendered by guest */ |
| } |
| /* FIXME handle cur_hv_offs correctly */ |
| srcoff = s->regs.cur_offset - |
| (s->regs.cur_hv_offs >> 16) - (s->regs.cur_hv_offs & 0xffff) * 16; |
| for (i = 0; i < 64; i++) { |
| for (j = 0; j < 8; j++, idx++) { |
| data[idx] = vga_read_byte(&s->vga, srcoff + i * 16 + j); |
| data[512 + idx] = vga_read_byte(&s->vga, srcoff + i * 16 + j + 8); |
| } |
| } |
| if (!s->cursor) { |
| s->cursor = cursor_alloc(64, 64); |
| } |
| cursor_set_mono(s->cursor, s->regs.cur_color1, s->regs.cur_color0, |
| &data[512], 1, &data[0]); |
| dpy_cursor_define(s->vga.con, s->cursor); |
| } |
| |
| /* Alternatively support guest rendered hardware cursor */ |
| static void ati_cursor_invalidate(VGACommonState *vga) |
| { |
| ATIVGAState *s = container_of(vga, ATIVGAState, vga); |
| int size = (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) ? 64 : 0; |
| |
| if (s->regs.cur_offset & BIT(31)) { |
| return; /* Do not update cursor if locked */ |
| } |
| if (s->cursor_size != size || |
| vga->hw_cursor_x != s->regs.cur_hv_pos >> 16 || |
| vga->hw_cursor_y != (s->regs.cur_hv_pos & 0xffff) || |
| s->cursor_offset != s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - |
| (s->regs.cur_hv_offs & 0xffff) * 16) { |
| /* Remove old cursor then update and show new one if needed */ |
| vga_invalidate_scanlines(vga, vga->hw_cursor_y, vga->hw_cursor_y + 63); |
| vga->hw_cursor_x = s->regs.cur_hv_pos >> 16; |
| vga->hw_cursor_y = s->regs.cur_hv_pos & 0xffff; |
| s->cursor_offset = s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - |
| (s->regs.cur_hv_offs & 0xffff) * 16; |
| s->cursor_size = size; |
| if (size) { |
| vga_invalidate_scanlines(vga, |
| vga->hw_cursor_y, vga->hw_cursor_y + 63); |
| } |
| } |
| } |
| |
| static void ati_cursor_draw_line(VGACommonState *vga, uint8_t *d, int scr_y) |
| { |
| ATIVGAState *s = container_of(vga, ATIVGAState, vga); |
| uint32_t srcoff; |
| uint32_t *dp = (uint32_t *)d; |
| int i, j, h; |
| |
| if (!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN) || |
| scr_y < vga->hw_cursor_y || scr_y >= vga->hw_cursor_y + 64 || |
| scr_y > s->regs.crtc_v_total_disp >> 16) { |
| return; |
| } |
| /* FIXME handle cur_hv_offs correctly */ |
| srcoff = s->cursor_offset + (scr_y - vga->hw_cursor_y) * 16; |
| dp = &dp[vga->hw_cursor_x]; |
| h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; |
| for (i = 0; i < 8; i++) { |
| uint32_t color; |
| uint8_t abits = vga_read_byte(vga, srcoff + i); |
| uint8_t xbits = vga_read_byte(vga, srcoff + i + 8); |
| for (j = 0; j < 8; j++, abits <<= 1, xbits <<= 1) { |
| if (abits & BIT(7)) { |
| if (xbits & BIT(7)) { |
| color = dp[i * 8 + j] ^ 0xffffffff; /* complement */ |
| } else { |
| continue; /* transparent, no change */ |
| } |
| } else { |
| color = (xbits & BIT(7) ? s->regs.cur_color1 : |
| s->regs.cur_color0) | 0xff000000; |
| } |
| if (vga->hw_cursor_x + i * 8 + j >= h) { |
| return; /* end of screen, don't span to next line */ |
| } |
| dp[i * 8 + j] = color; |
| } |
| } |
| } |
| |
| static uint64_t ati_i2c(bitbang_i2c_interface *i2c, uint64_t data, int base) |
| { |
| bool c = (data & BIT(base + 17) ? !!(data & BIT(base + 1)) : 1); |
| bool d = (data & BIT(base + 16) ? !!(data & BIT(base)) : 1); |
| |
| bitbang_i2c_set(i2c, BITBANG_I2C_SCL, c); |
| d = bitbang_i2c_set(i2c, BITBANG_I2C_SDA, d); |
| |
| data &= ~0xf00ULL; |
| if (c) { |
| data |= BIT(base + 9); |
| } |
| if (d) { |
| data |= BIT(base + 8); |
| } |
| return data; |
| } |
| |
| static void ati_vga_update_irq(ATIVGAState *s) |
| { |
| pci_set_irq(&s->dev, !!(s->regs.gen_int_status & s->regs.gen_int_cntl)); |
| } |
| |
| static void ati_vga_vblank_irq(void *opaque) |
| { |
| ATIVGAState *s = opaque; |
| |
| timer_mod(&s->vblank_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| NANOSECONDS_PER_SECOND / 60); |
| s->regs.gen_int_status |= CRTC_VBLANK_INT; |
| ati_vga_update_irq(s); |
| } |
| |
| static inline uint64_t ati_reg_read_offs(uint32_t reg, int offs, |
| unsigned int size) |
| { |
| if (offs == 0 && size == 4) { |
| return reg; |
| } else { |
| return extract32(reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE); |
| } |
| } |
| |
| static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size) |
| { |
| ATIVGAState *s = opaque; |
| uint64_t val = 0; |
| |
| switch (addr) { |
| case MM_INDEX: |
| val = s->regs.mm_index; |
| break; |
| case MM_DATA ... MM_DATA + 3: |
| /* indexed access to regs or memory */ |
| if (s->regs.mm_index & BIT(31)) { |
| uint32_t idx = s->regs.mm_index & ~BIT(31); |
| if (idx <= s->vga.vram_size - size) { |
| val = ldn_le_p(s->vga.vram_ptr + idx, size); |
| } |
| } else if (s->regs.mm_index > MM_DATA + 3) { |
| val = ati_mm_read(s, s->regs.mm_index + addr - MM_DATA, size); |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "ati_mm_read: mm_index too small: %u\n", s->regs.mm_index); |
| } |
| break; |
| case BIOS_0_SCRATCH ... BUS_CNTL - 1: |
| { |
| int i = (addr - BIOS_0_SCRATCH) / 4; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { |
| break; |
| } |
| val = ati_reg_read_offs(s->regs.bios_scratch[i], |
| addr - (BIOS_0_SCRATCH + i * 4), size); |
| break; |
| } |
| case GEN_INT_CNTL: |
| val = s->regs.gen_int_cntl; |
| break; |
| case GEN_INT_STATUS: |
| val = s->regs.gen_int_status; |
| break; |
| case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: |
| val = ati_reg_read_offs(s->regs.crtc_gen_cntl, |
| addr - CRTC_GEN_CNTL, size); |
| break; |
| case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: |
| val = ati_reg_read_offs(s->regs.crtc_ext_cntl, |
| addr - CRTC_EXT_CNTL, size); |
| break; |
| case DAC_CNTL: |
| val = s->regs.dac_cntl; |
| break; |
| case GPIO_VGA_DDC ... GPIO_VGA_DDC + 3: |
| val = ati_reg_read_offs(s->regs.gpio_vga_ddc, |
| addr - GPIO_VGA_DDC, size); |
| break; |
| case GPIO_DVI_DDC ... GPIO_DVI_DDC + 3: |
| val = ati_reg_read_offs(s->regs.gpio_dvi_ddc, |
| addr - GPIO_DVI_DDC, size); |
| break; |
| case GPIO_MONID ... GPIO_MONID + 3: |
| val = ati_reg_read_offs(s->regs.gpio_monid, |
| addr - GPIO_MONID, size); |
| break; |
| case PALETTE_INDEX: |
| /* FIXME unaligned access */ |
| val = vga_ioport_read(&s->vga, VGA_PEL_IR) << 16; |
| val |= vga_ioport_read(&s->vga, VGA_PEL_IW) & 0xff; |
| break; |
| case PALETTE_DATA: |
| val = vga_ioport_read(&s->vga, VGA_PEL_D); |
| break; |
| case PALETTE_30_DATA: |
| val = s->regs.palette[vga_ioport_read(&s->vga, VGA_PEL_IR)]; |
| break; |
| case CNFG_CNTL: |
| val = s->regs.config_cntl; |
| break; |
| case CNFG_MEMSIZE: |
| val = s->vga.vram_size; |
| break; |
| case CONFIG_APER_0_BASE: |
| case CONFIG_APER_1_BASE: |
| val = pci_default_read_config(&s->dev, |
| PCI_BASE_ADDRESS_0, size) & 0xfffffff0; |
| break; |
| case CONFIG_APER_SIZE: |
| val = s->vga.vram_size / 2; |
| break; |
| case CONFIG_REG_1_BASE: |
| val = pci_default_read_config(&s->dev, |
| PCI_BASE_ADDRESS_2, size) & 0xfffffff0; |
| break; |
| case CONFIG_REG_APER_SIZE: |
| val = memory_region_size(&s->mm) / 2; |
| break; |
| case HOST_PATH_CNTL: |
| val = BIT(23); /* Radeon HDP_APER_CNTL */ |
| break; |
| case MC_STATUS: |
| val = 5; |
| break; |
| case MEM_SDRAM_MODE_REG: |
| if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| val = BIT(28) | BIT(20); |
| } |
| break; |
| case RBBM_STATUS: |
| case GUI_STAT: |
| val = 64; /* free CMDFIFO entries */ |
| break; |
| case CRTC_H_TOTAL_DISP: |
| val = s->regs.crtc_h_total_disp; |
| break; |
| case CRTC_H_SYNC_STRT_WID: |
| val = s->regs.crtc_h_sync_strt_wid; |
| break; |
| case CRTC_V_TOTAL_DISP: |
| val = s->regs.crtc_v_total_disp; |
| break; |
| case CRTC_V_SYNC_STRT_WID: |
| val = s->regs.crtc_v_sync_strt_wid; |
| break; |
| case CRTC_OFFSET: |
| val = s->regs.crtc_offset; |
| break; |
| case CRTC_OFFSET_CNTL: |
| val = s->regs.crtc_offset_cntl; |
| break; |
| case CRTC_PITCH: |
| val = s->regs.crtc_pitch; |
| break; |
| case 0xf00 ... 0xfff: |
| val = pci_default_read_config(&s->dev, addr - 0xf00, size); |
| break; |
| case CUR_OFFSET ... CUR_OFFSET + 3: |
| val = ati_reg_read_offs(s->regs.cur_offset, addr - CUR_OFFSET, size); |
| break; |
| case CUR_HORZ_VERT_POSN ... CUR_HORZ_VERT_POSN + 3: |
| val = ati_reg_read_offs(s->regs.cur_hv_pos, |
| addr - CUR_HORZ_VERT_POSN, size); |
| if (addr + size > CUR_HORZ_VERT_POSN + 3) { |
| val |= (s->regs.cur_offset & BIT(31)) >> (4 - size); |
| } |
| break; |
| case CUR_HORZ_VERT_OFF ... CUR_HORZ_VERT_OFF + 3: |
| val = ati_reg_read_offs(s->regs.cur_hv_offs, |
| addr - CUR_HORZ_VERT_OFF, size); |
| if (addr + size > CUR_HORZ_VERT_OFF + 3) { |
| val |= (s->regs.cur_offset & BIT(31)) >> (4 - size); |
| } |
| break; |
| case CUR_CLR0 ... CUR_CLR0 + 3: |
| val = ati_reg_read_offs(s->regs.cur_color0, addr - CUR_CLR0, size); |
| break; |
| case CUR_CLR1 ... CUR_CLR1 + 3: |
| val = ati_reg_read_offs(s->regs.cur_color1, addr - CUR_CLR1, size); |
| break; |
| case DST_OFFSET: |
| val = s->regs.dst_offset; |
| break; |
| case DST_PITCH: |
| val = s->regs.dst_pitch; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| val &= s->regs.dst_tile << 16; |
| } |
| break; |
| case DST_WIDTH: |
| val = s->regs.dst_width; |
| break; |
| case DST_HEIGHT: |
| val = s->regs.dst_height; |
| break; |
| case SRC_X: |
| val = s->regs.src_x; |
| break; |
| case SRC_Y: |
| val = s->regs.src_y; |
| break; |
| case DST_X: |
| val = s->regs.dst_x; |
| break; |
| case DST_Y: |
| val = s->regs.dst_y; |
| break; |
| case DP_GUI_MASTER_CNTL: |
| val = s->regs.dp_gui_master_cntl; |
| break; |
| case SRC_OFFSET: |
| val = s->regs.src_offset; |
| break; |
| case SRC_PITCH: |
| val = s->regs.src_pitch; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| val &= s->regs.src_tile << 16; |
| } |
| break; |
| case DP_BRUSH_BKGD_CLR: |
| val = s->regs.dp_brush_bkgd_clr; |
| break; |
| case DP_BRUSH_FRGD_CLR: |
| val = s->regs.dp_brush_frgd_clr; |
| break; |
| case DP_SRC_FRGD_CLR: |
| val = s->regs.dp_src_frgd_clr; |
| break; |
| case DP_SRC_BKGD_CLR: |
| val = s->regs.dp_src_bkgd_clr; |
| break; |
| case DP_CNTL: |
| val = s->regs.dp_cntl; |
| break; |
| case DP_DATATYPE: |
| val = s->regs.dp_datatype; |
| break; |
| case DP_MIX: |
| val = s->regs.dp_mix; |
| break; |
| case DP_WRITE_MASK: |
| val = s->regs.dp_write_mask; |
| break; |
| case DEFAULT_OFFSET: |
| val = s->regs.default_offset; |
| if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| val >>= 10; |
| val |= s->regs.default_pitch << 16; |
| val |= s->regs.default_tile << 30; |
| } |
| break; |
| case DEFAULT_PITCH: |
| val = s->regs.default_pitch; |
| val |= s->regs.default_tile << 16; |
| break; |
| case DEFAULT_SC_BOTTOM_RIGHT: |
| val = s->regs.default_sc_bottom_right; |
| break; |
| default: |
| break; |
| } |
| if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { |
| trace_ati_mm_read(size, addr, ati_reg_name(addr & ~3ULL), val); |
| } |
| return val; |
| } |
| |
| static inline void ati_reg_write_offs(uint32_t *reg, int offs, |
| uint64_t data, unsigned int size) |
| { |
| if (offs == 0 && size == 4) { |
| *reg = data; |
| } else { |
| *reg = deposit32(*reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE, |
| data); |
| } |
| } |
| |
| static void ati_mm_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned int size) |
| { |
| ATIVGAState *s = opaque; |
| |
| if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { |
| trace_ati_mm_write(size, addr, ati_reg_name(addr & ~3ULL), data); |
| } |
| switch (addr) { |
| case MM_INDEX: |
| s->regs.mm_index = data & ~3; |
| break; |
| case MM_DATA ... MM_DATA + 3: |
| /* indexed access to regs or memory */ |
| if (s->regs.mm_index & BIT(31)) { |
| uint32_t idx = s->regs.mm_index & ~BIT(31); |
| if (idx <= s->vga.vram_size - size) { |
| stn_le_p(s->vga.vram_ptr + idx, size, data); |
| } |
| } else if (s->regs.mm_index > MM_DATA + 3) { |
| ati_mm_write(s, s->regs.mm_index + addr - MM_DATA, data, size); |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "ati_mm_write: mm_index too small: %u\n", s->regs.mm_index); |
| } |
| break; |
| case BIOS_0_SCRATCH ... BUS_CNTL - 1: |
| { |
| int i = (addr - BIOS_0_SCRATCH) / 4; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { |
| break; |
| } |
| ati_reg_write_offs(&s->regs.bios_scratch[i], |
| addr - (BIOS_0_SCRATCH + i * 4), data, size); |
| break; |
| } |
| case GEN_INT_CNTL: |
| s->regs.gen_int_cntl = data; |
| if (data & CRTC_VBLANK_INT) { |
| ati_vga_vblank_irq(s); |
| } else { |
| timer_del(&s->vblank_timer); |
| ati_vga_update_irq(s); |
| } |
| break; |
| case GEN_INT_STATUS: |
| data &= (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF ? |
| 0x000f040fUL : 0xfc080effUL); |
| s->regs.gen_int_status &= ~data; |
| ati_vga_update_irq(s); |
| break; |
| case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: |
| { |
| uint32_t val = s->regs.crtc_gen_cntl; |
| ati_reg_write_offs(&s->regs.crtc_gen_cntl, |
| addr - CRTC_GEN_CNTL, data, size); |
| if ((val & CRTC2_CUR_EN) != (s->regs.crtc_gen_cntl & CRTC2_CUR_EN)) { |
| if (s->cursor_guest_mode) { |
| s->vga.force_shadow = !!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN); |
| } else { |
| if (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) { |
| ati_cursor_define(s); |
| } |
| dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, |
| s->regs.cur_hv_pos & 0xffff, |
| (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) != 0); |
| } |
| } |
| if ((val & (CRTC2_EXT_DISP_EN | CRTC2_EN)) != |
| (s->regs.crtc_gen_cntl & (CRTC2_EXT_DISP_EN | CRTC2_EN))) { |
| ati_vga_switch_mode(s); |
| } |
| break; |
| } |
| case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: |
| { |
| uint32_t val = s->regs.crtc_ext_cntl; |
| ati_reg_write_offs(&s->regs.crtc_ext_cntl, |
| addr - CRTC_EXT_CNTL, data, size); |
| if (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS) { |
| DPRINTF("Display disabled\n"); |
| s->vga.ar_index &= ~BIT(5); |
| } else { |
| DPRINTF("Display enabled\n"); |
| s->vga.ar_index |= BIT(5); |
| ati_vga_switch_mode(s); |
| } |
| if ((val & CRT_CRTC_DISPLAY_DIS) != |
| (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS)) { |
| ati_vga_switch_mode(s); |
| } |
| break; |
| } |
| case DAC_CNTL: |
| s->regs.dac_cntl = data & 0xffffe3ff; |
| s->vga.dac_8bit = !!(data & DAC_8BIT_EN); |
| break; |
| /* |
| * GPIO regs for DDC access. Because some drivers access these via |
| * multiple byte writes we have to be careful when we send bits to |
| * avoid spurious changes in bitbang_i2c state. Only do it when either |
| * the enable bits are changed or output bits changed while enabled. |
| */ |
| case GPIO_VGA_DDC ... GPIO_VGA_DDC + 3: |
| if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| /* FIXME: Maybe add a property to select VGA or DVI port? */ |
| } |
| break; |
| case GPIO_DVI_DDC ... GPIO_DVI_DDC + 3: |
| if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| ati_reg_write_offs(&s->regs.gpio_dvi_ddc, |
| addr - GPIO_DVI_DDC, data, size); |
| if ((addr <= GPIO_DVI_DDC + 2 && addr + size > GPIO_DVI_DDC + 2) || |
| (addr == GPIO_DVI_DDC && (s->regs.gpio_dvi_ddc & 0x30000))) { |
| s->regs.gpio_dvi_ddc = ati_i2c(&s->bbi2c, |
| s->regs.gpio_dvi_ddc, 0); |
| } |
| } |
| break; |
| case GPIO_MONID ... GPIO_MONID + 3: |
| /* FIXME What does Radeon have here? */ |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| /* Rage128p accesses DDC via MONID(1-2) with additional mask bit */ |
| ati_reg_write_offs(&s->regs.gpio_monid, |
| addr - GPIO_MONID, data, size); |
| if ((s->regs.gpio_monid & BIT(25)) && |
| ((addr <= GPIO_MONID + 2 && addr + size > GPIO_MONID + 2) || |
| (addr == GPIO_MONID && (s->regs.gpio_monid & 0x60000)))) { |
| s->regs.gpio_monid = ati_i2c(&s->bbi2c, s->regs.gpio_monid, 1); |
| } |
| } |
| break; |
| case PALETTE_INDEX ... PALETTE_INDEX + 3: |
| if (size == 4) { |
| vga_ioport_write(&s->vga, VGA_PEL_IR, (data >> 16) & 0xff); |
| vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); |
| } else { |
| if (addr == PALETTE_INDEX) { |
| vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); |
| } else { |
| vga_ioport_write(&s->vga, VGA_PEL_IR, data & 0xff); |
| } |
| } |
| break; |
| case PALETTE_DATA ... PALETTE_DATA + 3: |
| data <<= addr - PALETTE_DATA; |
| data = bswap32(data) >> 8; |
| vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); |
| data >>= 8; |
| vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); |
| data >>= 8; |
| vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); |
| break; |
| case PALETTE_30_DATA: |
| s->regs.palette[vga_ioport_read(&s->vga, VGA_PEL_IW)] = data; |
| vga_ioport_write(&s->vga, VGA_PEL_D, (data >> 22) & 0xff); |
| vga_ioport_write(&s->vga, VGA_PEL_D, (data >> 12) & 0xff); |
| vga_ioport_write(&s->vga, VGA_PEL_D, (data >> 2) & 0xff); |
| break; |
| case CNFG_CNTL: |
| s->regs.config_cntl = data; |
| break; |
| case CRTC_H_TOTAL_DISP: |
| s->regs.crtc_h_total_disp = data & 0x07ff07ff; |
| break; |
| case CRTC_H_SYNC_STRT_WID: |
| s->regs.crtc_h_sync_strt_wid = data & 0x17bf1fff; |
| break; |
| case CRTC_V_TOTAL_DISP: |
| s->regs.crtc_v_total_disp = data & 0x0fff0fff; |
| break; |
| case CRTC_V_SYNC_STRT_WID: |
| s->regs.crtc_v_sync_strt_wid = data & 0x9f0fff; |
| break; |
| case CRTC_OFFSET: |
| s->regs.crtc_offset = data & 0xc7ffffff; |
| break; |
| case CRTC_OFFSET_CNTL: |
| s->regs.crtc_offset_cntl = data; /* FIXME */ |
| break; |
| case CRTC_PITCH: |
| s->regs.crtc_pitch = data & 0x07ff07ff; |
| break; |
| case 0xf00 ... 0xfff: |
| /* read-only copy of PCI config space so ignore writes */ |
| break; |
| case CUR_OFFSET ... CUR_OFFSET + 3: |
| { |
| uint32_t t = s->regs.cur_offset; |
| |
| ati_reg_write_offs(&t, addr - CUR_OFFSET, data, size); |
| t &= 0x87fffff0; |
| if (s->regs.cur_offset != t) { |
| s->regs.cur_offset = t; |
| ati_cursor_define(s); |
| } |
| break; |
| } |
| case CUR_HORZ_VERT_POSN ... CUR_HORZ_VERT_POSN + 3: |
| { |
| uint32_t t = s->regs.cur_hv_pos | (s->regs.cur_offset & BIT(31)); |
| |
| ati_reg_write_offs(&t, addr - CUR_HORZ_VERT_POSN, data, size); |
| s->regs.cur_hv_pos = t & 0x3fff0fff; |
| if (t & BIT(31)) { |
| s->regs.cur_offset |= t & BIT(31); |
| } else if (s->regs.cur_offset & BIT(31)) { |
| s->regs.cur_offset &= ~BIT(31); |
| ati_cursor_define(s); |
| } |
| if (!s->cursor_guest_mode && |
| (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) && !(t & BIT(31))) { |
| dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, |
| s->regs.cur_hv_pos & 0xffff, true); |
| } |
| break; |
| } |
| case CUR_HORZ_VERT_OFF: |
| { |
| uint32_t t = s->regs.cur_hv_offs | (s->regs.cur_offset & BIT(31)); |
| |
| ati_reg_write_offs(&t, addr - CUR_HORZ_VERT_OFF, data, size); |
| s->regs.cur_hv_offs = t & 0x3f003f; |
| if (t & BIT(31)) { |
| s->regs.cur_offset |= t & BIT(31); |
| } else if (s->regs.cur_offset & BIT(31)) { |
| s->regs.cur_offset &= ~BIT(31); |
| ati_cursor_define(s); |
| } |
| break; |
| } |
| case CUR_CLR0 ... CUR_CLR0 + 3: |
| { |
| uint32_t t = s->regs.cur_color0; |
| |
| ati_reg_write_offs(&t, addr - CUR_CLR0, data, size); |
| t &= 0xffffff; |
| if (s->regs.cur_color0 != t) { |
| s->regs.cur_color0 = t; |
| ati_cursor_define(s); |
| } |
| break; |
| } |
| case CUR_CLR1 ... CUR_CLR1 + 3: |
| /* |
| * Update cursor unconditionally here because some clients set up |
| * other registers before actually writing cursor data to memory at |
| * offset so we would miss cursor change unless always updating here |
| */ |
| ati_reg_write_offs(&s->regs.cur_color1, addr - CUR_CLR1, data, size); |
| s->regs.cur_color1 &= 0xffffff; |
| ati_cursor_define(s); |
| break; |
| case DST_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.dst_offset = data & 0xfffffff0; |
| } else { |
| s->regs.dst_offset = data & 0xfffffc00; |
| } |
| break; |
| case DST_PITCH: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.dst_pitch = data & 0x3fff; |
| s->regs.dst_tile = (data >> 16) & 1; |
| } else { |
| s->regs.dst_pitch = data & 0x3ff0; |
| } |
| break; |
| case DST_TILE: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY) { |
| s->regs.dst_tile = data & 3; |
| } |
| break; |
| case DST_WIDTH: |
| s->regs.dst_width = data & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case DST_HEIGHT: |
| s->regs.dst_height = data & 0x3fff; |
| break; |
| case SRC_X: |
| s->regs.src_x = data & 0x3fff; |
| break; |
| case SRC_Y: |
| s->regs.src_y = data & 0x3fff; |
| break; |
| case DST_X: |
| s->regs.dst_x = data & 0x3fff; |
| break; |
| case DST_Y: |
| s->regs.dst_y = data & 0x3fff; |
| break; |
| case SRC_PITCH_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.src_offset = (data & 0x1fffff) << 5; |
| s->regs.src_pitch = (data & 0x7fe00000) >> 21; |
| s->regs.src_tile = data >> 31; |
| } else { |
| s->regs.src_offset = (data & 0x3fffff) << 10; |
| s->regs.src_pitch = (data & 0x3fc00000) >> 16; |
| s->regs.src_tile = (data >> 30) & 1; |
| } |
| break; |
| case DST_PITCH_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.dst_offset = (data & 0x1fffff) << 5; |
| s->regs.dst_pitch = (data & 0x7fe00000) >> 21; |
| s->regs.dst_tile = data >> 31; |
| } else { |
| s->regs.dst_offset = (data & 0x3fffff) << 10; |
| s->regs.dst_pitch = (data & 0x3fc00000) >> 16; |
| s->regs.dst_tile = data >> 30; |
| } |
| break; |
| case SRC_Y_X: |
| s->regs.src_x = data & 0x3fff; |
| s->regs.src_y = (data >> 16) & 0x3fff; |
| break; |
| case DST_Y_X: |
| s->regs.dst_x = data & 0x3fff; |
| s->regs.dst_y = (data >> 16) & 0x3fff; |
| break; |
| case DST_HEIGHT_WIDTH: |
| s->regs.dst_width = data & 0x3fff; |
| s->regs.dst_height = (data >> 16) & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case DP_GUI_MASTER_CNTL: |
| s->regs.dp_gui_master_cntl = data & 0xf800000f; |
| s->regs.dp_datatype = (data & 0x0f00) >> 8 | (data & 0x30f0) << 4 | |
| (data & 0x4000) << 16; |
| s->regs.dp_mix = (data & GMC_ROP3_MASK) | (data & 0x7000000) >> 16; |
| break; |
| case DST_WIDTH_X: |
| s->regs.dst_x = data & 0x3fff; |
| s->regs.dst_width = (data >> 16) & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case SRC_X_Y: |
| s->regs.src_y = data & 0x3fff; |
| s->regs.src_x = (data >> 16) & 0x3fff; |
| break; |
| case DST_X_Y: |
| s->regs.dst_y = data & 0x3fff; |
| s->regs.dst_x = (data >> 16) & 0x3fff; |
| break; |
| case DST_WIDTH_HEIGHT: |
| s->regs.dst_height = data & 0x3fff; |
| s->regs.dst_width = (data >> 16) & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case DST_HEIGHT_Y: |
| s->regs.dst_y = data & 0x3fff; |
| s->regs.dst_height = (data >> 16) & 0x3fff; |
| break; |
| case SRC_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.src_offset = data & 0xfffffff0; |
| } else { |
| s->regs.src_offset = data & 0xfffffc00; |
| } |
| break; |
| case SRC_PITCH: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.src_pitch = data & 0x3fff; |
| s->regs.src_tile = (data >> 16) & 1; |
| } else { |
| s->regs.src_pitch = data & 0x3ff0; |
| } |
| break; |
| case DP_BRUSH_BKGD_CLR: |
| s->regs.dp_brush_bkgd_clr = data; |
| break; |
| case DP_BRUSH_FRGD_CLR: |
| s->regs.dp_brush_frgd_clr = data; |
| break; |
| case DP_CNTL: |
| s->regs.dp_cntl = data; |
| break; |
| case DP_DATATYPE: |
| s->regs.dp_datatype = data & 0xe0070f0f; |
| break; |
| case DP_MIX: |
| s->regs.dp_mix = data & 0x00ff0700; |
| break; |
| case DP_WRITE_MASK: |
| s->regs.dp_write_mask = data; |
| break; |
| case DEFAULT_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.default_offset = data & 0xfffffff0; |
| } else { |
| /* Radeon has DEFAULT_PITCH_OFFSET here like DST_PITCH_OFFSET */ |
| s->regs.default_offset = (data & 0x3fffff) << 10; |
| s->regs.default_pitch = (data & 0x3fc00000) >> 16; |
| s->regs.default_tile = data >> 30; |
| } |
| break; |
| case DEFAULT_PITCH: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.default_pitch = data & 0x3fff; |
| s->regs.default_tile = (data >> 16) & 1; |
| } |
| break; |
| case DEFAULT_SC_BOTTOM_RIGHT: |
| s->regs.default_sc_bottom_right = data & 0x3fff3fff; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps ati_mm_ops = { |
| .read = ati_mm_read, |
| .write = ati_mm_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void ati_vga_realize(PCIDevice *dev, Error **errp) |
| { |
| ATIVGAState *s = ATI_VGA(dev); |
| VGACommonState *vga = &s->vga; |
| |
| #ifndef CONFIG_PIXMAN |
| if (s->use_pixman != 0) { |
| warn_report("x-pixman != 0, not effective without PIXMAN"); |
| } |
| #endif |
| |
| if (s->model) { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(ati_model_aliases); i++) { |
| if (!strcmp(s->model, ati_model_aliases[i].name)) { |
| s->dev_id = ati_model_aliases[i].dev_id; |
| break; |
| } |
| } |
| if (i >= ARRAY_SIZE(ati_model_aliases)) { |
| warn_report("Unknown ATI VGA model name, " |
| "using default rage128p"); |
| } |
| } |
| if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF && |
| s->dev_id != PCI_DEVICE_ID_ATI_RADEON_QY) { |
| error_setg(errp, "Unknown ATI VGA device id, " |
| "only 0x5046 and 0x5159 are supported"); |
| return; |
| } |
| pci_set_word(dev->config + PCI_DEVICE_ID, s->dev_id); |
| |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY && |
| s->vga.vram_size_mb < 16) { |
| warn_report("Too small video memory for device id"); |
| s->vga.vram_size_mb = 16; |
| } |
| |
| /* init vga bits */ |
| if (!vga_common_init(vga, OBJECT(s), errp)) { |
| return; |
| } |
| vga_init(vga, OBJECT(s), pci_address_space(dev), |
| pci_address_space_io(dev), true); |
| vga->con = graphic_console_init(DEVICE(s), 0, s->vga.hw_ops, vga); |
| if (s->cursor_guest_mode) { |
| vga->cursor_invalidate = ati_cursor_invalidate; |
| vga->cursor_draw_line = ati_cursor_draw_line; |
| } |
| |
| /* ddc, edid */ |
| I2CBus *i2cbus = i2c_init_bus(DEVICE(s), "ati-vga.ddc"); |
| bitbang_i2c_init(&s->bbi2c, i2cbus); |
| I2CSlave *i2cddc = I2C_SLAVE(qdev_new(TYPE_I2CDDC)); |
| i2c_slave_set_address(i2cddc, 0x50); |
| qdev_realize_and_unref(DEVICE(i2cddc), BUS(i2cbus), &error_abort); |
| |
| /* mmio register space */ |
| memory_region_init_io(&s->mm, OBJECT(s), &ati_mm_ops, s, |
| "ati.mmregs", 0x4000); |
| /* io space is alias to beginning of mmregs */ |
| memory_region_init_alias(&s->io, OBJECT(s), "ati.io", &s->mm, 0, 0x100); |
| |
| pci_register_bar(dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &vga->vram); |
| pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io); |
| pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mm); |
| |
| /* most interrupts are not yet emulated but MacOS needs at least VBlank */ |
| dev->config[PCI_INTERRUPT_PIN] = 1; |
| timer_init_ns(&s->vblank_timer, QEMU_CLOCK_VIRTUAL, ati_vga_vblank_irq, s); |
| } |
| |
| static void ati_vga_reset(DeviceState *dev) |
| { |
| ATIVGAState *s = ATI_VGA(dev); |
| |
| timer_del(&s->vblank_timer); |
| ati_vga_update_irq(s); |
| |
| /* reset vga */ |
| vga_common_reset(&s->vga); |
| s->mode = VGA_MODE; |
| } |
| |
| static void ati_vga_exit(PCIDevice *dev) |
| { |
| ATIVGAState *s = ATI_VGA(dev); |
| |
| timer_del(&s->vblank_timer); |
| graphic_console_close(s->vga.con); |
| } |
| |
| static Property ati_vga_properties[] = { |
| DEFINE_PROP_UINT32("vgamem_mb", ATIVGAState, vga.vram_size_mb, 16), |
| DEFINE_PROP_STRING("model", ATIVGAState, model), |
| DEFINE_PROP_UINT16("x-device-id", ATIVGAState, dev_id, |
| PCI_DEVICE_ID_ATI_RAGE128_PF), |
| DEFINE_PROP_BOOL("guest_hwcursor", ATIVGAState, cursor_guest_mode, false), |
| /* this is a debug option, prefer PROP_UINT over PROP_BIT for simplicity */ |
| DEFINE_PROP_UINT8("x-pixman", ATIVGAState, use_pixman, DEFAULT_X_PIXMAN), |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| static void ati_vga_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| dc->reset = ati_vga_reset; |
| device_class_set_props(dc, ati_vga_properties); |
| dc->hotpluggable = false; |
| set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); |
| |
| k->class_id = PCI_CLASS_DISPLAY_VGA; |
| k->vendor_id = PCI_VENDOR_ID_ATI; |
| k->device_id = PCI_DEVICE_ID_ATI_RAGE128_PF; |
| k->romfile = "vgabios-ati.bin"; |
| k->realize = ati_vga_realize; |
| k->exit = ati_vga_exit; |
| } |
| |
| static void ati_vga_init(Object *o) |
| { |
| object_property_set_description(o, "x-pixman", "Use pixman for: " |
| "1: fill, 2: blit"); |
| } |
| |
| static const TypeInfo ati_vga_info = { |
| .name = TYPE_ATI_VGA, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(ATIVGAState), |
| .class_init = ati_vga_class_init, |
| .instance_init = ati_vga_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static void ati_vga_register_types(void) |
| { |
| type_register_static(&ati_vga_info); |
| } |
| |
| type_init(ati_vga_register_types) |
