| /* |
| * Analog Devices ADM1266 Cascadable Super Sequencer with Margin Control and |
| * Fault Recording with PMBus |
| * |
| * https://www.analog.com/media/en/technical-documentation/data-sheets/adm1266.pdf |
| * |
| * Copyright 2023 Google LLC |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/i2c/pmbus_device.h" |
| #include "hw/irq.h" |
| #include "migration/vmstate.h" |
| #include "qapi/error.h" |
| #include "qapi/visitor.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| |
| #define TYPE_ADM1266 "adm1266" |
| OBJECT_DECLARE_SIMPLE_TYPE(ADM1266State, ADM1266) |
| |
| #define ADM1266_BLACKBOX_CONFIG 0xD3 |
| #define ADM1266_PDIO_CONFIG 0xD4 |
| #define ADM1266_READ_STATE 0xD9 |
| #define ADM1266_READ_BLACKBOX 0xDE |
| #define ADM1266_SET_RTC 0xDF |
| #define ADM1266_GPIO_SYNC_CONFIGURATION 0xE1 |
| #define ADM1266_BLACKBOX_INFORMATION 0xE6 |
| #define ADM1266_PDIO_STATUS 0xE9 |
| #define ADM1266_GPIO_STATUS 0xEA |
| |
| /* Defaults */ |
| #define ADM1266_OPERATION_DEFAULT 0x80 |
| #define ADM1266_CAPABILITY_DEFAULT 0xA0 |
| #define ADM1266_CAPABILITY_NO_PEC 0x20 |
| #define ADM1266_PMBUS_REVISION_DEFAULT 0x22 |
| #define ADM1266_MFR_ID_DEFAULT "ADI" |
| #define ADM1266_MFR_ID_DEFAULT_LEN 32 |
| #define ADM1266_MFR_MODEL_DEFAULT "ADM1266-A1" |
| #define ADM1266_MFR_MODEL_DEFAULT_LEN 32 |
| #define ADM1266_MFR_REVISION_DEFAULT "25" |
| #define ADM1266_MFR_REVISION_DEFAULT_LEN 8 |
| |
| #define ADM1266_NUM_PAGES 17 |
| /** |
| * PAGE Index |
| * Page 0 VH1. |
| * Page 1 VH2. |
| * Page 2 VH3. |
| * Page 3 VH4. |
| * Page 4 VP1. |
| * Page 5 VP2. |
| * Page 6 VP3. |
| * Page 7 VP4. |
| * Page 8 VP5. |
| * Page 9 VP6. |
| * Page 10 VP7. |
| * Page 11 VP8. |
| * Page 12 VP9. |
| * Page 13 VP10. |
| * Page 14 VP11. |
| * Page 15 VP12. |
| * Page 16 VP13. |
| */ |
| typedef struct ADM1266State { |
| PMBusDevice parent; |
| |
| char mfr_id[32]; |
| char mfr_model[32]; |
| char mfr_rev[8]; |
| } ADM1266State; |
| |
| static const uint8_t adm1266_ic_device_id[] = {0x03, 0x41, 0x12, 0x66}; |
| static const uint8_t adm1266_ic_device_rev[] = {0x08, 0x01, 0x08, 0x07, 0x0, |
| 0x0, 0x07, 0x41, 0x30}; |
| |
| static void adm1266_exit_reset(Object *obj) |
| { |
| ADM1266State *s = ADM1266(obj); |
| PMBusDevice *pmdev = PMBUS_DEVICE(obj); |
| |
| pmdev->page = 0; |
| pmdev->capability = ADM1266_CAPABILITY_NO_PEC; |
| |
| for (int i = 0; i < ADM1266_NUM_PAGES; i++) { |
| pmdev->pages[i].operation = ADM1266_OPERATION_DEFAULT; |
| pmdev->pages[i].revision = ADM1266_PMBUS_REVISION_DEFAULT; |
| pmdev->pages[i].vout_mode = 0; |
| pmdev->pages[i].read_vout = pmbus_data2linear_mode(12, 0); |
| pmdev->pages[i].vout_margin_high = pmbus_data2linear_mode(15, 0); |
| pmdev->pages[i].vout_margin_low = pmbus_data2linear_mode(3, 0); |
| pmdev->pages[i].vout_ov_fault_limit = pmbus_data2linear_mode(16, 0); |
| pmdev->pages[i].revision = ADM1266_PMBUS_REVISION_DEFAULT; |
| } |
| |
| strncpy(s->mfr_id, ADM1266_MFR_ID_DEFAULT, 4); |
| strncpy(s->mfr_model, ADM1266_MFR_MODEL_DEFAULT, 11); |
| strncpy(s->mfr_rev, ADM1266_MFR_REVISION_DEFAULT, 3); |
| } |
| |
| static uint8_t adm1266_read_byte(PMBusDevice *pmdev) |
| { |
| ADM1266State *s = ADM1266(pmdev); |
| |
| switch (pmdev->code) { |
| case PMBUS_MFR_ID: /* R/W block */ |
| pmbus_send_string(pmdev, s->mfr_id); |
| break; |
| |
| case PMBUS_MFR_MODEL: /* R/W block */ |
| pmbus_send_string(pmdev, s->mfr_model); |
| break; |
| |
| case PMBUS_MFR_REVISION: /* R/W block */ |
| pmbus_send_string(pmdev, s->mfr_rev); |
| break; |
| |
| case PMBUS_IC_DEVICE_ID: |
| pmbus_send(pmdev, adm1266_ic_device_id, sizeof(adm1266_ic_device_id)); |
| break; |
| |
| case PMBUS_IC_DEVICE_REV: |
| pmbus_send(pmdev, adm1266_ic_device_rev, sizeof(adm1266_ic_device_rev)); |
| break; |
| |
| default: |
| qemu_log_mask(LOG_UNIMP, |
| "%s: reading from unimplemented register: 0x%02x\n", |
| __func__, pmdev->code); |
| return 0xFF; |
| } |
| |
| return 0; |
| } |
| |
| static int adm1266_write_data(PMBusDevice *pmdev, const uint8_t *buf, |
| uint8_t len) |
| { |
| ADM1266State *s = ADM1266(pmdev); |
| |
| switch (pmdev->code) { |
| case PMBUS_MFR_ID: /* R/W block */ |
| pmbus_receive_block(pmdev, (uint8_t *)s->mfr_id, sizeof(s->mfr_id)); |
| break; |
| |
| case PMBUS_MFR_MODEL: /* R/W block */ |
| pmbus_receive_block(pmdev, (uint8_t *)s->mfr_model, |
| sizeof(s->mfr_model)); |
| break; |
| |
| case PMBUS_MFR_REVISION: /* R/W block*/ |
| pmbus_receive_block(pmdev, (uint8_t *)s->mfr_rev, sizeof(s->mfr_rev)); |
| break; |
| |
| case ADM1266_SET_RTC: /* do nothing */ |
| break; |
| |
| default: |
| qemu_log_mask(LOG_UNIMP, |
| "%s: writing to unimplemented register: 0x%02x\n", |
| __func__, pmdev->code); |
| break; |
| } |
| return 0; |
| } |
| |
| static void adm1266_get(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| uint16_t value; |
| PMBusDevice *pmdev = PMBUS_DEVICE(obj); |
| PMBusVoutMode *mode = (PMBusVoutMode *)&pmdev->pages[0].vout_mode; |
| |
| if (strcmp(name, "vout") == 0) { |
| value = pmbus_linear_mode2data(*(uint16_t *)opaque, mode->exp); |
| } else { |
| value = *(uint16_t *)opaque; |
| } |
| |
| visit_type_uint16(v, name, &value, errp); |
| } |
| |
| static void adm1266_set(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| uint16_t *internal = opaque; |
| uint16_t value; |
| PMBusDevice *pmdev = PMBUS_DEVICE(obj); |
| PMBusVoutMode *mode = (PMBusVoutMode *)&pmdev->pages[0].vout_mode; |
| |
| if (!visit_type_uint16(v, name, &value, errp)) { |
| return; |
| } |
| |
| *internal = pmbus_data2linear_mode(value, mode->exp); |
| pmbus_check_limits(pmdev); |
| } |
| |
| static const VMStateDescription vmstate_adm1266 = { |
| .name = "ADM1266", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (const VMStateField[]){ |
| VMSTATE_PMBUS_DEVICE(parent, ADM1266State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void adm1266_init(Object *obj) |
| { |
| PMBusDevice *pmdev = PMBUS_DEVICE(obj); |
| uint64_t flags = PB_HAS_VOUT_MODE | PB_HAS_VOUT | PB_HAS_VOUT_MARGIN | |
| PB_HAS_VOUT_RATING | PB_HAS_STATUS_MFR_SPECIFIC; |
| |
| for (int i = 0; i < ADM1266_NUM_PAGES; i++) { |
| pmbus_page_config(pmdev, i, flags); |
| |
| object_property_add(obj, "vout[*]", "uint16", |
| adm1266_get, |
| adm1266_set, NULL, &pmdev->pages[i].read_vout); |
| } |
| } |
| |
| static void adm1266_class_init(ObjectClass *klass, void *data) |
| { |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PMBusDeviceClass *k = PMBUS_DEVICE_CLASS(klass); |
| |
| dc->desc = "Analog Devices ADM1266 Hot Swap controller"; |
| dc->vmsd = &vmstate_adm1266; |
| k->write_data = adm1266_write_data; |
| k->receive_byte = adm1266_read_byte; |
| k->device_num_pages = 17; |
| |
| rc->phases.exit = adm1266_exit_reset; |
| } |
| |
| static const TypeInfo adm1266_info = { |
| .name = TYPE_ADM1266, |
| .parent = TYPE_PMBUS_DEVICE, |
| .instance_size = sizeof(ADM1266State), |
| .instance_init = adm1266_init, |
| .class_init = adm1266_class_init, |
| }; |
| |
| static void adm1266_register_types(void) |
| { |
| type_register_static(&adm1266_info); |
| } |
| |
| type_init(adm1266_register_types) |