| /* |
| * QEMU S390x KVM floating interrupt controller (flic) |
| * |
| * Copyright 2014 IBM Corp. |
| * Author(s): Jens Freimann <jfrei@linux.vnet.ibm.com> |
| * Cornelia Huck <cornelia.huck@de.ibm.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or (at |
| * your option) any later version. See the COPYING file in the top-level |
| * directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "kvm/kvm_s390x.h" |
| #include <sys/ioctl.h> |
| #include "qemu/error-report.h" |
| #include "qemu/module.h" |
| #include "qapi/error.h" |
| #include "sysemu/kvm.h" |
| #include "hw/s390x/s390_flic.h" |
| #include "hw/s390x/adapter.h" |
| #include "hw/s390x/css.h" |
| #include "migration/qemu-file-types.h" |
| #include "trace.h" |
| #include "qom/object.h" |
| |
| #define FLIC_SAVE_INITIAL_SIZE qemu_real_host_page_size() |
| #define FLIC_FAILED (-1UL) |
| #define FLIC_SAVEVM_VERSION 1 |
| |
| struct KVMS390FLICState{ |
| S390FLICState parent_obj; |
| |
| uint32_t fd; |
| bool clear_io_supported; |
| }; |
| |
| static KVMS390FLICState *s390_get_kvm_flic(S390FLICState *fs) |
| { |
| static KVMS390FLICState *flic; |
| |
| if (!flic) { |
| /* we only have one flic device, so this is fine to cache */ |
| flic = KVM_S390_FLIC(fs); |
| } |
| return flic; |
| } |
| |
| /** |
| * flic_get_all_irqs - store all pending irqs in buffer |
| * @buf: pointer to buffer which is passed to kernel |
| * @len: length of buffer |
| * @flic: pointer to flic device state |
| * |
| * Returns: -ENOMEM if buffer is too small, |
| * -EINVAL if attr.group is invalid, |
| * -EFAULT if copying to userspace failed, |
| * on success return number of stored interrupts |
| */ |
| static int flic_get_all_irqs(KVMS390FLICState *flic, |
| void *buf, int len) |
| { |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_GET_ALL_IRQS, |
| .addr = (uint64_t) buf, |
| .attr = len, |
| }; |
| int rc; |
| |
| rc = ioctl(flic->fd, KVM_GET_DEVICE_ATTR, &attr); |
| |
| return rc == -1 ? -errno : rc; |
| } |
| |
| static void flic_enable_pfault(KVMS390FLICState *flic) |
| { |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_APF_ENABLE, |
| }; |
| int rc; |
| |
| rc = ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr); |
| |
| if (rc) { |
| fprintf(stderr, "flic: couldn't enable pfault\n"); |
| } |
| } |
| |
| static void flic_disable_wait_pfault(KVMS390FLICState *flic) |
| { |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_APF_DISABLE_WAIT, |
| }; |
| int rc; |
| |
| rc = ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr); |
| |
| if (rc) { |
| fprintf(stderr, "flic: couldn't disable pfault\n"); |
| } |
| } |
| |
| /** flic_enqueue_irqs - returns 0 on success |
| * @buf: pointer to buffer which is passed to kernel |
| * @len: length of buffer |
| * @flic: pointer to flic device state |
| * |
| * Returns: -EINVAL if attr.group is unknown |
| */ |
| static int flic_enqueue_irqs(void *buf, uint64_t len, |
| KVMS390FLICState *flic) |
| { |
| int rc; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_ENQUEUE, |
| .addr = (uint64_t) buf, |
| .attr = len, |
| }; |
| |
| rc = ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr); |
| |
| return rc ? -errno : 0; |
| } |
| |
| static void kvm_s390_inject_flic(S390FLICState *fs, struct kvm_s390_irq *irq) |
| { |
| static bool use_flic = true; |
| int r; |
| |
| if (use_flic) { |
| r = flic_enqueue_irqs(irq, sizeof(*irq), s390_get_kvm_flic(fs)); |
| if (r == -ENOSYS) { |
| use_flic = false; |
| } |
| if (!r) { |
| return; |
| } |
| } |
| /* fallback to legacy KVM IOCTL in case FLIC fails */ |
| kvm_s390_floating_interrupt_legacy(irq); |
| } |
| |
| static void kvm_s390_inject_service(S390FLICState *fs, uint32_t parm) |
| { |
| struct kvm_s390_irq irq = { |
| .type = KVM_S390_INT_SERVICE, |
| .u.ext.ext_params = parm, |
| }; |
| |
| kvm_s390_inject_flic(fs, &irq); |
| } |
| |
| static void kvm_s390_inject_io(S390FLICState *fs, uint16_t subchannel_id, |
| uint16_t subchannel_nr, uint32_t io_int_parm, |
| uint32_t io_int_word) |
| { |
| struct kvm_s390_irq irq = { |
| .u.io.subchannel_id = subchannel_id, |
| .u.io.subchannel_nr = subchannel_nr, |
| .u.io.io_int_parm = io_int_parm, |
| .u.io.io_int_word = io_int_word, |
| }; |
| |
| if (io_int_word & IO_INT_WORD_AI) { |
| irq.type = KVM_S390_INT_IO(1, 0, 0, 0); |
| } else { |
| irq.type = KVM_S390_INT_IO(0, (subchannel_id & 0xff00) >> 8, |
| (subchannel_id & 0x0006), |
| subchannel_nr); |
| } |
| kvm_s390_inject_flic(fs, &irq); |
| } |
| |
| static void kvm_s390_inject_crw_mchk(S390FLICState *fs) |
| { |
| struct kvm_s390_irq irq = { |
| .type = KVM_S390_MCHK, |
| .u.mchk.cr14 = CR14_CHANNEL_REPORT_SC, |
| .u.mchk.mcic = s390_build_validity_mcic() | MCIC_SC_CP, |
| }; |
| |
| kvm_s390_inject_flic(fs, &irq); |
| } |
| |
| static int kvm_s390_clear_io_flic(S390FLICState *fs, uint16_t subchannel_id, |
| uint16_t subchannel_nr) |
| { |
| KVMS390FLICState *flic = s390_get_kvm_flic(fs); |
| int rc; |
| uint32_t sid = subchannel_id << 16 | subchannel_nr; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_CLEAR_IO_IRQ, |
| .addr = (uint64_t) &sid, |
| .attr = sizeof(sid), |
| }; |
| if (unlikely(!flic->clear_io_supported)) { |
| return -ENOSYS; |
| } |
| rc = ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr); |
| return rc ? -errno : 0; |
| } |
| |
| static int kvm_s390_modify_ais_mode(S390FLICState *fs, uint8_t isc, |
| uint16_t mode) |
| { |
| KVMS390FLICState *flic = s390_get_kvm_flic(fs); |
| struct kvm_s390_ais_req req = { |
| .isc = isc, |
| .mode = mode, |
| }; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_AISM, |
| .addr = (uint64_t)&req, |
| }; |
| |
| if (!fs->ais_supported) { |
| return -ENOSYS; |
| } |
| |
| return ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr) ? -errno : 0; |
| } |
| |
| static int kvm_s390_inject_airq(S390FLICState *fs, uint8_t type, |
| uint8_t isc, uint8_t flags) |
| { |
| KVMS390FLICState *flic = s390_get_kvm_flic(fs); |
| uint32_t id = css_get_adapter_id(type, isc); |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_AIRQ_INJECT, |
| .attr = id, |
| }; |
| |
| if (!fs->ais_supported) { |
| return -ENOSYS; |
| } |
| |
| return ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr) ? -errno : 0; |
| } |
| |
| /** |
| * __get_all_irqs - store all pending irqs in buffer |
| * @flic: pointer to flic device state |
| * @buf: pointer to pointer to a buffer |
| * @len: length of buffer |
| * |
| * Returns: return value of flic_get_all_irqs |
| * Note: Retry and increase buffer size until flic_get_all_irqs |
| * either returns a value >= 0 or a negative error code. |
| * -ENOMEM is an exception, which means the buffer is too small |
| * and we should try again. Other negative error codes can be |
| * -EFAULT and -EINVAL which we ignore at this point |
| */ |
| static int __get_all_irqs(KVMS390FLICState *flic, |
| void **buf, int len) |
| { |
| int r; |
| |
| do { |
| /* returns -ENOMEM if buffer is too small and number |
| * of queued interrupts on success */ |
| r = flic_get_all_irqs(flic, *buf, len); |
| if (r >= 0) { |
| break; |
| } |
| len *= 2; |
| *buf = g_try_realloc(*buf, len); |
| if (!buf) { |
| return -ENOMEM; |
| } |
| } while (r == -ENOMEM && len <= KVM_S390_FLIC_MAX_BUFFER); |
| |
| return r; |
| } |
| |
| static int kvm_s390_register_io_adapter(S390FLICState *fs, uint32_t id, |
| uint8_t isc, bool swap, |
| bool is_maskable, uint8_t flags) |
| { |
| struct kvm_s390_io_adapter adapter = { |
| .id = id, |
| .isc = isc, |
| .maskable = is_maskable, |
| .swap = swap, |
| .flags = flags, |
| }; |
| KVMS390FLICState *flic = KVM_S390_FLIC(fs); |
| int r; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_ADAPTER_REGISTER, |
| .addr = (uint64_t)&adapter, |
| }; |
| |
| if (!kvm_gsi_routing_enabled()) { |
| /* nothing to do */ |
| return 0; |
| } |
| |
| r = ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr); |
| |
| return r ? -errno : 0; |
| } |
| |
| static int kvm_s390_io_adapter_map(S390FLICState *fs, uint32_t id, |
| uint64_t map_addr, bool do_map) |
| { |
| struct kvm_s390_io_adapter_req req = { |
| .id = id, |
| .type = do_map ? KVM_S390_IO_ADAPTER_MAP : KVM_S390_IO_ADAPTER_UNMAP, |
| .addr = map_addr, |
| }; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_ADAPTER_MODIFY, |
| .addr = (uint64_t)&req, |
| }; |
| KVMS390FLICState *flic = s390_get_kvm_flic(fs); |
| int r; |
| |
| if (!kvm_gsi_routing_enabled()) { |
| /* nothing to do */ |
| return 0; |
| } |
| |
| r = ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr); |
| return r ? -errno : 0; |
| } |
| |
| static int kvm_irqchip_add_adapter_route(KVMState *s, AdapterInfo *adapter) |
| { |
| struct kvm_irq_routing_entry kroute = {}; |
| int virq; |
| |
| if (!kvm_gsi_routing_enabled()) { |
| return -ENOSYS; |
| } |
| |
| virq = kvm_irqchip_get_virq(s); |
| if (virq < 0) { |
| return virq; |
| } |
| |
| kroute.gsi = virq; |
| kroute.type = KVM_IRQ_ROUTING_S390_ADAPTER; |
| kroute.flags = 0; |
| kroute.u.adapter.summary_addr = adapter->summary_addr; |
| kroute.u.adapter.ind_addr = adapter->ind_addr; |
| kroute.u.adapter.summary_offset = adapter->summary_offset; |
| kroute.u.adapter.ind_offset = adapter->ind_offset; |
| kroute.u.adapter.adapter_id = adapter->adapter_id; |
| |
| kvm_add_routing_entry(s, &kroute); |
| |
| return virq; |
| } |
| |
| static int kvm_s390_add_adapter_routes(S390FLICState *fs, |
| AdapterRoutes *routes) |
| { |
| int ret, i; |
| uint64_t ind_offset = routes->adapter.ind_offset; |
| |
| if (!kvm_gsi_routing_enabled()) { |
| return -ENOSYS; |
| } |
| |
| for (i = 0; i < routes->num_routes; i++) { |
| ret = kvm_irqchip_add_adapter_route(kvm_state, &routes->adapter); |
| if (ret < 0) { |
| goto out_undo; |
| } |
| routes->gsi[i] = ret; |
| routes->adapter.ind_offset++; |
| } |
| kvm_irqchip_commit_routes(kvm_state); |
| |
| /* Restore passed-in structure to original state. */ |
| routes->adapter.ind_offset = ind_offset; |
| return 0; |
| out_undo: |
| while (--i >= 0) { |
| kvm_irqchip_release_virq(kvm_state, routes->gsi[i]); |
| routes->gsi[i] = -1; |
| } |
| routes->adapter.ind_offset = ind_offset; |
| return ret; |
| } |
| |
| static void kvm_s390_release_adapter_routes(S390FLICState *fs, |
| AdapterRoutes *routes) |
| { |
| int i; |
| |
| if (!kvm_gsi_routing_enabled()) { |
| return; |
| } |
| |
| for (i = 0; i < routes->num_routes; i++) { |
| if (routes->gsi[i] >= 0) { |
| kvm_irqchip_release_virq(kvm_state, routes->gsi[i]); |
| routes->gsi[i] = -1; |
| } |
| } |
| } |
| |
| /** |
| * kvm_flic_save - Save pending floating interrupts |
| * @f: QEMUFile containing migration state |
| * @opaque: pointer to flic device state |
| * @size: ignored |
| * |
| * Note: Pass buf and len to kernel. Start with one page and |
| * increase until buffer is sufficient or maximum size is |
| * reached |
| */ |
| static int kvm_flic_save(QEMUFile *f, void *opaque, size_t size, |
| const VMStateField *field, JSONWriter *vmdesc) |
| { |
| KVMS390FLICState *flic = opaque; |
| int len = FLIC_SAVE_INITIAL_SIZE; |
| void *buf; |
| int count; |
| int r = 0; |
| |
| flic_disable_wait_pfault((struct KVMS390FLICState *) opaque); |
| |
| buf = g_try_malloc0(len); |
| if (!buf) { |
| /* Storing FLIC_FAILED into the count field here will cause the |
| * target system to fail when attempting to load irqs from the |
| * migration state */ |
| error_report("flic: couldn't allocate memory"); |
| qemu_put_be64(f, FLIC_FAILED); |
| return -ENOMEM; |
| } |
| |
| count = __get_all_irqs(flic, &buf, len); |
| if (count < 0) { |
| error_report("flic: couldn't retrieve irqs from kernel, rc %d", |
| count); |
| /* Storing FLIC_FAILED into the count field here will cause the |
| * target system to fail when attempting to load irqs from the |
| * migration state */ |
| qemu_put_be64(f, FLIC_FAILED); |
| r = count; |
| } else { |
| qemu_put_be64(f, count); |
| qemu_put_buffer(f, (uint8_t *) buf, |
| count * sizeof(struct kvm_s390_irq)); |
| } |
| g_free(buf); |
| |
| return r; |
| } |
| |
| /** |
| * kvm_flic_load - Load pending floating interrupts |
| * @f: QEMUFile containing migration state |
| * @opaque: pointer to flic device state |
| * @size: ignored |
| * |
| * Returns: value of flic_enqueue_irqs, -EINVAL on error |
| * Note: Do nothing when no interrupts where stored |
| * in QEMUFile |
| */ |
| static int kvm_flic_load(QEMUFile *f, void *opaque, size_t size, |
| const VMStateField *field) |
| { |
| uint64_t len = 0; |
| uint64_t count = 0; |
| void *buf = NULL; |
| int r = 0; |
| |
| flic_enable_pfault((struct KVMS390FLICState *) opaque); |
| |
| count = qemu_get_be64(f); |
| len = count * sizeof(struct kvm_s390_irq); |
| if (count == FLIC_FAILED) { |
| return -EINVAL; |
| } |
| if (count == 0) { |
| return 0; |
| } |
| buf = g_try_malloc0(len); |
| if (!buf) { |
| return -ENOMEM; |
| } |
| |
| if (qemu_get_buffer(f, (uint8_t *) buf, len) != len) { |
| r = -EINVAL; |
| goto out_free; |
| } |
| r = flic_enqueue_irqs(buf, len, (struct KVMS390FLICState *) opaque); |
| |
| out_free: |
| g_free(buf); |
| return r; |
| } |
| |
| typedef struct KVMS390FLICStateMigTmp { |
| KVMS390FLICState *parent; |
| uint8_t simm; |
| uint8_t nimm; |
| } KVMS390FLICStateMigTmp; |
| |
| static int kvm_flic_ais_pre_save(void *opaque) |
| { |
| KVMS390FLICStateMigTmp *tmp = opaque; |
| KVMS390FLICState *flic = tmp->parent; |
| struct kvm_s390_ais_all ais; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_AISM_ALL, |
| .addr = (uint64_t)&ais, |
| .attr = sizeof(ais), |
| }; |
| |
| if (ioctl(flic->fd, KVM_GET_DEVICE_ATTR, &attr)) { |
| error_report("Failed to retrieve kvm flic ais states"); |
| return -EINVAL; |
| } |
| |
| tmp->simm = ais.simm; |
| tmp->nimm = ais.nimm; |
| |
| return 0; |
| } |
| |
| static int kvm_flic_ais_post_load(void *opaque, int version_id) |
| { |
| KVMS390FLICStateMigTmp *tmp = opaque; |
| KVMS390FLICState *flic = tmp->parent; |
| struct kvm_s390_ais_all ais = { |
| .simm = tmp->simm, |
| .nimm = tmp->nimm, |
| }; |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_AISM_ALL, |
| .addr = (uint64_t)&ais, |
| }; |
| |
| /* This can happen when the user mis-configures its guests in an |
| * incompatible fashion or without a CPU model. For example using |
| * qemu with -cpu host (which is not migration safe) and do a |
| * migration from a host that has AIS to a host that has no AIS. |
| * In that case the target system will reject the migration here. |
| */ |
| if (!ais_needed(flic)) { |
| return -ENOSYS; |
| } |
| |
| return ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr) ? -errno : 0; |
| } |
| |
| static const VMStateDescription kvm_s390_flic_ais_tmp = { |
| .name = "s390-flic-ais-tmp", |
| .pre_save = kvm_flic_ais_pre_save, |
| .post_load = kvm_flic_ais_post_load, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT8(simm, KVMS390FLICStateMigTmp), |
| VMSTATE_UINT8(nimm, KVMS390FLICStateMigTmp), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription kvm_s390_flic_vmstate_ais = { |
| .name = "s390-flic/ais", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .needed = ais_needed, |
| .fields = (const VMStateField[]) { |
| VMSTATE_WITH_TMP(KVMS390FLICState, KVMS390FLICStateMigTmp, |
| kvm_s390_flic_ais_tmp), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription kvm_s390_flic_vmstate = { |
| /* should have been like kvm-s390-flic, |
| * can't change without breaking compat */ |
| .name = "s390-flic", |
| .version_id = FLIC_SAVEVM_VERSION, |
| .minimum_version_id = FLIC_SAVEVM_VERSION, |
| .fields = (const VMStateField[]) { |
| { |
| .name = "irqs", |
| .info = &(const VMStateInfo) { |
| .name = "irqs", |
| .get = kvm_flic_load, |
| .put = kvm_flic_save, |
| }, |
| .flags = VMS_SINGLE, |
| }, |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (const VMStateDescription * const []) { |
| &kvm_s390_flic_vmstate_ais, |
| NULL |
| } |
| }; |
| |
| struct KVMS390FLICStateClass { |
| S390FLICStateClass parent_class; |
| DeviceRealize parent_realize; |
| }; |
| typedef struct KVMS390FLICStateClass KVMS390FLICStateClass; |
| |
| DECLARE_CLASS_CHECKERS(KVMS390FLICStateClass, KVM_S390_FLIC, |
| TYPE_KVM_S390_FLIC) |
| |
| |
| static void kvm_s390_flic_realize(DeviceState *dev, Error **errp) |
| { |
| KVMS390FLICState *flic_state = KVM_S390_FLIC(dev); |
| struct kvm_create_device cd = {0}; |
| struct kvm_device_attr test_attr = {0}; |
| int ret; |
| Error *err = NULL; |
| |
| KVM_S390_FLIC_GET_CLASS(dev)->parent_realize(dev, &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| flic_state->fd = -1; |
| |
| cd.type = KVM_DEV_TYPE_FLIC; |
| ret = kvm_vm_ioctl(kvm_state, KVM_CREATE_DEVICE, &cd); |
| if (ret < 0) { |
| error_setg_errno(errp, errno, "Creating the KVM device failed"); |
| trace_flic_create_device(errno); |
| return; |
| } |
| flic_state->fd = cd.fd; |
| |
| /* Check clear_io_irq support */ |
| test_attr.group = KVM_DEV_FLIC_CLEAR_IO_IRQ; |
| flic_state->clear_io_supported = !ioctl(flic_state->fd, |
| KVM_HAS_DEVICE_ATTR, test_attr); |
| } |
| |
| static void kvm_s390_flic_reset(DeviceState *dev) |
| { |
| KVMS390FLICState *flic = KVM_S390_FLIC(dev); |
| S390FLICState *fs = S390_FLIC_COMMON(dev); |
| struct kvm_device_attr attr = { |
| .group = KVM_DEV_FLIC_CLEAR_IRQS, |
| }; |
| int rc = 0; |
| uint8_t isc; |
| |
| if (flic->fd == -1) { |
| return; |
| } |
| |
| flic_disable_wait_pfault(flic); |
| |
| if (fs->ais_supported) { |
| for (isc = 0; isc <= MAX_ISC; isc++) { |
| rc = kvm_s390_modify_ais_mode(fs, isc, SIC_IRQ_MODE_ALL); |
| if (rc) { |
| error_report("Failed to reset ais mode for isc %d: %s", |
| isc, strerror(-rc)); |
| } |
| } |
| } |
| |
| rc = ioctl(flic->fd, KVM_SET_DEVICE_ATTR, &attr); |
| if (rc) { |
| trace_flic_reset_failed(errno); |
| } |
| |
| flic_enable_pfault(flic); |
| } |
| |
| static void kvm_s390_flic_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| S390FLICStateClass *fsc = S390_FLIC_COMMON_CLASS(oc); |
| KVMS390FLICStateClass *kfsc = KVM_S390_FLIC_CLASS(oc); |
| |
| device_class_set_parent_realize(dc, kvm_s390_flic_realize, |
| &kfsc->parent_realize); |
| dc->vmsd = &kvm_s390_flic_vmstate; |
| dc->reset = kvm_s390_flic_reset; |
| fsc->register_io_adapter = kvm_s390_register_io_adapter; |
| fsc->io_adapter_map = kvm_s390_io_adapter_map; |
| fsc->add_adapter_routes = kvm_s390_add_adapter_routes; |
| fsc->release_adapter_routes = kvm_s390_release_adapter_routes; |
| fsc->clear_io_irq = kvm_s390_clear_io_flic; |
| fsc->modify_ais_mode = kvm_s390_modify_ais_mode; |
| fsc->inject_airq = kvm_s390_inject_airq; |
| fsc->inject_service = kvm_s390_inject_service; |
| fsc->inject_io = kvm_s390_inject_io; |
| fsc->inject_crw_mchk = kvm_s390_inject_crw_mchk; |
| } |
| |
| static const TypeInfo kvm_s390_flic_info = { |
| .name = TYPE_KVM_S390_FLIC, |
| .parent = TYPE_S390_FLIC_COMMON, |
| .instance_size = sizeof(KVMS390FLICState), |
| .class_size = sizeof(KVMS390FLICStateClass), |
| .class_init = kvm_s390_flic_class_init, |
| }; |
| |
| static void kvm_s390_flic_register_types(void) |
| { |
| type_register_static(&kvm_s390_flic_info); |
| } |
| |
| type_init(kvm_s390_flic_register_types) |