| /* |
| * ARM Generic Interrupt Controller using KVM in-kernel support |
| * |
| * Copyright (c) 2015 Samsung Electronics Co., Ltd. |
| * Written by Pavel Fedin |
| * Based on vGICv2 code by Peter Maydell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/intc/arm_gicv3_common.h" |
| #include "qemu/error-report.h" |
| #include "qemu/module.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/runstate.h" |
| #include "kvm_arm.h" |
| #include "gicv3_internal.h" |
| #include "vgic_common.h" |
| #include "migration/blocker.h" |
| #include "qom/object.h" |
| #include "target/arm/cpregs.h" |
| |
| |
| #ifdef DEBUG_GICV3_KVM |
| #define DPRINTF(fmt, ...) \ |
| do { fprintf(stderr, "kvm_gicv3: " fmt, ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) \ |
| do { } while (0) |
| #endif |
| |
| #define TYPE_KVM_ARM_GICV3 "kvm-arm-gicv3" |
| typedef struct KVMARMGICv3Class KVMARMGICv3Class; |
| /* This is reusing the GICv3State typedef from ARM_GICV3_ITS_COMMON */ |
| DECLARE_OBJ_CHECKERS(GICv3State, KVMARMGICv3Class, |
| KVM_ARM_GICV3, TYPE_KVM_ARM_GICV3) |
| |
| #define KVM_DEV_ARM_VGIC_SYSREG(op0, op1, crn, crm, op2) \ |
| (ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \ |
| ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \ |
| ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \ |
| ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \ |
| ARM64_SYS_REG_SHIFT_MASK(op2, OP2)) |
| |
| #define ICC_PMR_EL1 \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 4, 6, 0) |
| #define ICC_BPR0_EL1 \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 3) |
| #define ICC_AP0R_EL1(n) \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 8, 4 | n) |
| #define ICC_AP1R_EL1(n) \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 9, n) |
| #define ICC_BPR1_EL1 \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 3) |
| #define ICC_CTLR_EL1 \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 4) |
| #define ICC_SRE_EL1 \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 5) |
| #define ICC_IGRPEN0_EL1 \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 6) |
| #define ICC_IGRPEN1_EL1 \ |
| KVM_DEV_ARM_VGIC_SYSREG(3, 0, 12, 12, 7) |
| |
| struct KVMARMGICv3Class { |
| ARMGICv3CommonClass parent_class; |
| DeviceRealize parent_realize; |
| ResettablePhases parent_phases; |
| }; |
| |
| static void kvm_arm_gicv3_set_irq(void *opaque, int irq, int level) |
| { |
| GICv3State *s = (GICv3State *)opaque; |
| |
| kvm_arm_gic_set_irq(s->num_irq, irq, level); |
| } |
| |
| #define KVM_VGIC_ATTR(reg, typer) \ |
| ((typer & KVM_DEV_ARM_VGIC_V3_MPIDR_MASK) | (reg)) |
| |
| static inline void kvm_gicd_access(GICv3State *s, int offset, |
| uint32_t *val, bool write) |
| { |
| kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, |
| KVM_VGIC_ATTR(offset, 0), |
| val, write, &error_abort); |
| } |
| |
| static inline void kvm_gicr_access(GICv3State *s, int offset, int cpu, |
| uint32_t *val, bool write) |
| { |
| kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS, |
| KVM_VGIC_ATTR(offset, s->cpu[cpu].gicr_typer), |
| val, write, &error_abort); |
| } |
| |
| static inline void kvm_gicc_access(GICv3State *s, uint64_t reg, int cpu, |
| uint64_t *val, bool write) |
| { |
| kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, |
| KVM_VGIC_ATTR(reg, s->cpu[cpu].gicr_typer), |
| val, write, &error_abort); |
| } |
| |
| static inline void kvm_gic_line_level_access(GICv3State *s, int irq, int cpu, |
| uint32_t *val, bool write) |
| { |
| kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO, |
| KVM_VGIC_ATTR(irq, s->cpu[cpu].gicr_typer) | |
| (VGIC_LEVEL_INFO_LINE_LEVEL << |
| KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT), |
| val, write, &error_abort); |
| } |
| |
| /* Loop through each distributor IRQ related register; since bits |
| * corresponding to SPIs and PPIs are RAZ/WI when affinity routing |
| * is enabled, we skip those. |
| */ |
| #define for_each_dist_irq_reg(_irq, _max, _field_width) \ |
| for (_irq = GIC_INTERNAL; _irq < _max; _irq += (32 / _field_width)) |
| |
| static void kvm_dist_get_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) |
| { |
| uint32_t reg, *field; |
| int irq; |
| |
| /* For the KVM GICv3, affinity routing is always enabled, and the first 8 |
| * GICD_IPRIORITYR<n> registers are always RAZ/WI. The corresponding |
| * functionality is replaced by GICR_IPRIORITYR<n>. It doesn't need to |
| * sync them. So it needs to skip the field of GIC_INTERNAL irqs in bmp and |
| * offset. |
| */ |
| field = (uint32_t *)(bmp + GIC_INTERNAL); |
| offset += (GIC_INTERNAL * 8) / 8; |
| for_each_dist_irq_reg(irq, s->num_irq, 8) { |
| kvm_gicd_access(s, offset, ®, false); |
| *field = reg; |
| offset += 4; |
| field++; |
| } |
| } |
| |
| static void kvm_dist_put_priority(GICv3State *s, uint32_t offset, uint8_t *bmp) |
| { |
| uint32_t reg, *field; |
| int irq; |
| |
| /* For the KVM GICv3, affinity routing is always enabled, and the first 8 |
| * GICD_IPRIORITYR<n> registers are always RAZ/WI. The corresponding |
| * functionality is replaced by GICR_IPRIORITYR<n>. It doesn't need to |
| * sync them. So it needs to skip the field of GIC_INTERNAL irqs in bmp and |
| * offset. |
| */ |
| field = (uint32_t *)(bmp + GIC_INTERNAL); |
| offset += (GIC_INTERNAL * 8) / 8; |
| for_each_dist_irq_reg(irq, s->num_irq, 8) { |
| reg = *field; |
| kvm_gicd_access(s, offset, ®, true); |
| offset += 4; |
| field++; |
| } |
| } |
| |
| static void kvm_dist_get_edge_trigger(GICv3State *s, uint32_t offset, |
| uint32_t *bmp) |
| { |
| uint32_t reg; |
| int irq; |
| |
| /* For the KVM GICv3, affinity routing is always enabled, and the first 2 |
| * GICD_ICFGR<n> registers are always RAZ/WI. The corresponding |
| * functionality is replaced by GICR_ICFGR<n>. It doesn't need to sync |
| * them. So it should increase the offset to skip GIC_INTERNAL irqs. |
| * This matches the for_each_dist_irq_reg() macro which also skips the |
| * first GIC_INTERNAL irqs. |
| */ |
| offset += (GIC_INTERNAL * 2) / 8; |
| for_each_dist_irq_reg(irq, s->num_irq, 2) { |
| kvm_gicd_access(s, offset, ®, false); |
| reg = half_unshuffle32(reg >> 1); |
| if (irq % 32 != 0) { |
| reg = (reg << 16); |
| } |
| *gic_bmp_ptr32(bmp, irq) |= reg; |
| offset += 4; |
| } |
| } |
| |
| static void kvm_dist_put_edge_trigger(GICv3State *s, uint32_t offset, |
| uint32_t *bmp) |
| { |
| uint32_t reg; |
| int irq; |
| |
| /* For the KVM GICv3, affinity routing is always enabled, and the first 2 |
| * GICD_ICFGR<n> registers are always RAZ/WI. The corresponding |
| * functionality is replaced by GICR_ICFGR<n>. It doesn't need to sync |
| * them. So it should increase the offset to skip GIC_INTERNAL irqs. |
| * This matches the for_each_dist_irq_reg() macro which also skips the |
| * first GIC_INTERNAL irqs. |
| */ |
| offset += (GIC_INTERNAL * 2) / 8; |
| for_each_dist_irq_reg(irq, s->num_irq, 2) { |
| reg = *gic_bmp_ptr32(bmp, irq); |
| if (irq % 32 != 0) { |
| reg = (reg & 0xffff0000) >> 16; |
| } else { |
| reg = reg & 0xffff; |
| } |
| reg = half_shuffle32(reg) << 1; |
| kvm_gicd_access(s, offset, ®, true); |
| offset += 4; |
| } |
| } |
| |
| static void kvm_gic_get_line_level_bmp(GICv3State *s, uint32_t *bmp) |
| { |
| uint32_t reg; |
| int irq; |
| |
| for_each_dist_irq_reg(irq, s->num_irq, 1) { |
| kvm_gic_line_level_access(s, irq, 0, ®, false); |
| *gic_bmp_ptr32(bmp, irq) = reg; |
| } |
| } |
| |
| static void kvm_gic_put_line_level_bmp(GICv3State *s, uint32_t *bmp) |
| { |
| uint32_t reg; |
| int irq; |
| |
| for_each_dist_irq_reg(irq, s->num_irq, 1) { |
| reg = *gic_bmp_ptr32(bmp, irq); |
| kvm_gic_line_level_access(s, irq, 0, ®, true); |
| } |
| } |
| |
| /* Read a bitmap register group from the kernel VGIC. */ |
| static void kvm_dist_getbmp(GICv3State *s, uint32_t offset, uint32_t *bmp) |
| { |
| uint32_t reg; |
| int irq; |
| |
| /* For the KVM GICv3, affinity routing is always enabled, and the |
| * GICD_IGROUPR0/GICD_IGRPMODR0/GICD_ISENABLER0/GICD_ISPENDR0/ |
| * GICD_ISACTIVER0 registers are always RAZ/WI. The corresponding |
| * functionality is replaced by the GICR registers. It doesn't need to sync |
| * them. So it should increase the offset to skip GIC_INTERNAL irqs. |
| * This matches the for_each_dist_irq_reg() macro which also skips the |
| * first GIC_INTERNAL irqs. |
| */ |
| offset += (GIC_INTERNAL * 1) / 8; |
| for_each_dist_irq_reg(irq, s->num_irq, 1) { |
| kvm_gicd_access(s, offset, ®, false); |
| *gic_bmp_ptr32(bmp, irq) = reg; |
| offset += 4; |
| } |
| } |
| |
| static void kvm_dist_putbmp(GICv3State *s, uint32_t offset, |
| uint32_t clroffset, uint32_t *bmp) |
| { |
| uint32_t reg; |
| int irq; |
| |
| /* For the KVM GICv3, affinity routing is always enabled, and the |
| * GICD_IGROUPR0/GICD_IGRPMODR0/GICD_ISENABLER0/GICD_ISPENDR0/ |
| * GICD_ISACTIVER0 registers are always RAZ/WI. The corresponding |
| * functionality is replaced by the GICR registers. It doesn't need to sync |
| * them. So it should increase the offset and clroffset to skip GIC_INTERNAL |
| * irqs. This matches the for_each_dist_irq_reg() macro which also skips the |
| * first GIC_INTERNAL irqs. |
| */ |
| offset += (GIC_INTERNAL * 1) / 8; |
| if (clroffset != 0) { |
| clroffset += (GIC_INTERNAL * 1) / 8; |
| } |
| |
| for_each_dist_irq_reg(irq, s->num_irq, 1) { |
| /* If this bitmap is a set/clear register pair, first write to the |
| * clear-reg to clear all bits before using the set-reg to write |
| * the 1 bits. |
| */ |
| if (clroffset != 0) { |
| reg = 0; |
| kvm_gicd_access(s, clroffset, ®, true); |
| clroffset += 4; |
| } |
| reg = *gic_bmp_ptr32(bmp, irq); |
| kvm_gicd_access(s, offset, ®, true); |
| offset += 4; |
| } |
| } |
| |
| static void kvm_arm_gicv3_check(GICv3State *s) |
| { |
| uint32_t reg; |
| uint32_t num_irq; |
| |
| /* Sanity checking s->num_irq */ |
| kvm_gicd_access(s, GICD_TYPER, ®, false); |
| num_irq = ((reg & 0x1f) + 1) * 32; |
| |
| if (num_irq < s->num_irq) { |
| error_report("Model requests %u IRQs, but kernel supports max %u", |
| s->num_irq, num_irq); |
| abort(); |
| } |
| } |
| |
| static void kvm_arm_gicv3_put(GICv3State *s) |
| { |
| uint32_t regl, regh, reg; |
| uint64_t reg64, redist_typer; |
| int ncpu, i; |
| |
| kvm_arm_gicv3_check(s); |
| |
| kvm_gicr_access(s, GICR_TYPER, 0, ®l, false); |
| kvm_gicr_access(s, GICR_TYPER + 4, 0, ®h, false); |
| redist_typer = ((uint64_t)regh << 32) | regl; |
| |
| reg = s->gicd_ctlr; |
| kvm_gicd_access(s, GICD_CTLR, ®, true); |
| |
| if (redist_typer & GICR_TYPER_PLPIS) { |
| /* |
| * Restore base addresses before LPIs are potentially enabled by |
| * GICR_CTLR write |
| */ |
| for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { |
| GICv3CPUState *c = &s->cpu[ncpu]; |
| |
| reg64 = c->gicr_propbaser; |
| regl = (uint32_t)reg64; |
| kvm_gicr_access(s, GICR_PROPBASER, ncpu, ®l, true); |
| regh = (uint32_t)(reg64 >> 32); |
| kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, ®h, true); |
| |
| reg64 = c->gicr_pendbaser; |
| regl = (uint32_t)reg64; |
| kvm_gicr_access(s, GICR_PENDBASER, ncpu, ®l, true); |
| regh = (uint32_t)(reg64 >> 32); |
| kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, ®h, true); |
| } |
| } |
| |
| /* Redistributor state (one per CPU) */ |
| |
| for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { |
| GICv3CPUState *c = &s->cpu[ncpu]; |
| |
| reg = c->gicr_ctlr; |
| kvm_gicr_access(s, GICR_CTLR, ncpu, ®, true); |
| |
| reg = c->gicr_statusr[GICV3_NS]; |
| kvm_gicr_access(s, GICR_STATUSR, ncpu, ®, true); |
| |
| reg = c->gicr_waker; |
| kvm_gicr_access(s, GICR_WAKER, ncpu, ®, true); |
| |
| reg = c->gicr_igroupr0; |
| kvm_gicr_access(s, GICR_IGROUPR0, ncpu, ®, true); |
| |
| reg = ~0; |
| kvm_gicr_access(s, GICR_ICENABLER0, ncpu, ®, true); |
| reg = c->gicr_ienabler0; |
| kvm_gicr_access(s, GICR_ISENABLER0, ncpu, ®, true); |
| |
| /* Restore config before pending so we treat level/edge correctly */ |
| reg = half_shuffle32(c->edge_trigger >> 16) << 1; |
| kvm_gicr_access(s, GICR_ICFGR1, ncpu, ®, true); |
| |
| reg = c->level; |
| kvm_gic_line_level_access(s, 0, ncpu, ®, true); |
| |
| reg = ~0; |
| kvm_gicr_access(s, GICR_ICPENDR0, ncpu, ®, true); |
| reg = c->gicr_ipendr0; |
| kvm_gicr_access(s, GICR_ISPENDR0, ncpu, ®, true); |
| |
| reg = ~0; |
| kvm_gicr_access(s, GICR_ICACTIVER0, ncpu, ®, true); |
| reg = c->gicr_iactiver0; |
| kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, ®, true); |
| |
| for (i = 0; i < GIC_INTERNAL; i += 4) { |
| reg = c->gicr_ipriorityr[i] | |
| (c->gicr_ipriorityr[i + 1] << 8) | |
| (c->gicr_ipriorityr[i + 2] << 16) | |
| (c->gicr_ipriorityr[i + 3] << 24); |
| kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, ®, true); |
| } |
| } |
| |
| /* Distributor state (shared between all CPUs */ |
| reg = s->gicd_statusr[GICV3_NS]; |
| kvm_gicd_access(s, GICD_STATUSR, ®, true); |
| |
| /* s->enable bitmap -> GICD_ISENABLERn */ |
| kvm_dist_putbmp(s, GICD_ISENABLER, GICD_ICENABLER, s->enabled); |
| |
| /* s->group bitmap -> GICD_IGROUPRn */ |
| kvm_dist_putbmp(s, GICD_IGROUPR, 0, s->group); |
| |
| /* Restore targets before pending to ensure the pending state is set on |
| * the appropriate CPU interfaces in the kernel |
| */ |
| |
| /* s->gicd_irouter[irq] -> GICD_IROUTERn |
| * We can't use kvm_dist_put() here because the registers are 64-bit |
| */ |
| for (i = GIC_INTERNAL; i < s->num_irq; i++) { |
| uint32_t offset; |
| |
| offset = GICD_IROUTER + (sizeof(uint32_t) * i); |
| reg = (uint32_t)s->gicd_irouter[i]; |
| kvm_gicd_access(s, offset, ®, true); |
| |
| offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; |
| reg = (uint32_t)(s->gicd_irouter[i] >> 32); |
| kvm_gicd_access(s, offset, ®, true); |
| } |
| |
| /* s->trigger bitmap -> GICD_ICFGRn |
| * (restore configuration registers before pending IRQs so we treat |
| * level/edge correctly) |
| */ |
| kvm_dist_put_edge_trigger(s, GICD_ICFGR, s->edge_trigger); |
| |
| /* s->level bitmap -> line_level */ |
| kvm_gic_put_line_level_bmp(s, s->level); |
| |
| /* s->pending bitmap -> GICD_ISPENDRn */ |
| kvm_dist_putbmp(s, GICD_ISPENDR, GICD_ICPENDR, s->pending); |
| |
| /* s->active bitmap -> GICD_ISACTIVERn */ |
| kvm_dist_putbmp(s, GICD_ISACTIVER, GICD_ICACTIVER, s->active); |
| |
| /* s->gicd_ipriority[] -> GICD_IPRIORITYRn */ |
| kvm_dist_put_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); |
| |
| /* CPU Interface state (one per CPU) */ |
| |
| for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { |
| GICv3CPUState *c = &s->cpu[ncpu]; |
| int num_pri_bits; |
| |
| kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, true); |
| kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, |
| &c->icc_ctlr_el1[GICV3_NS], true); |
| kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, |
| &c->icc_igrpen[GICV3_G0], true); |
| kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, |
| &c->icc_igrpen[GICV3_G1NS], true); |
| kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, true); |
| kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], true); |
| kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], true); |
| |
| num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & |
| ICC_CTLR_EL1_PRIBITS_MASK) >> |
| ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; |
| |
| switch (num_pri_bits) { |
| case 7: |
| reg64 = c->icc_apr[GICV3_G0][3]; |
| kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, ®64, true); |
| reg64 = c->icc_apr[GICV3_G0][2]; |
| kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, ®64, true); |
| /* fall through */ |
| case 6: |
| reg64 = c->icc_apr[GICV3_G0][1]; |
| kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, ®64, true); |
| /* fall through */ |
| default: |
| reg64 = c->icc_apr[GICV3_G0][0]; |
| kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, ®64, true); |
| } |
| |
| switch (num_pri_bits) { |
| case 7: |
| reg64 = c->icc_apr[GICV3_G1NS][3]; |
| kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, ®64, true); |
| reg64 = c->icc_apr[GICV3_G1NS][2]; |
| kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, ®64, true); |
| /* fall through */ |
| case 6: |
| reg64 = c->icc_apr[GICV3_G1NS][1]; |
| kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, ®64, true); |
| /* fall through */ |
| default: |
| reg64 = c->icc_apr[GICV3_G1NS][0]; |
| kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, ®64, true); |
| } |
| } |
| } |
| |
| static void kvm_arm_gicv3_get(GICv3State *s) |
| { |
| uint32_t regl, regh, reg; |
| uint64_t reg64, redist_typer; |
| int ncpu, i; |
| |
| kvm_arm_gicv3_check(s); |
| |
| kvm_gicr_access(s, GICR_TYPER, 0, ®l, false); |
| kvm_gicr_access(s, GICR_TYPER + 4, 0, ®h, false); |
| redist_typer = ((uint64_t)regh << 32) | regl; |
| |
| kvm_gicd_access(s, GICD_CTLR, ®, false); |
| s->gicd_ctlr = reg; |
| |
| /* Redistributor state (one per CPU) */ |
| |
| for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { |
| GICv3CPUState *c = &s->cpu[ncpu]; |
| |
| kvm_gicr_access(s, GICR_CTLR, ncpu, ®, false); |
| c->gicr_ctlr = reg; |
| |
| kvm_gicr_access(s, GICR_STATUSR, ncpu, ®, false); |
| c->gicr_statusr[GICV3_NS] = reg; |
| |
| kvm_gicr_access(s, GICR_WAKER, ncpu, ®, false); |
| c->gicr_waker = reg; |
| |
| kvm_gicr_access(s, GICR_IGROUPR0, ncpu, ®, false); |
| c->gicr_igroupr0 = reg; |
| kvm_gicr_access(s, GICR_ISENABLER0, ncpu, ®, false); |
| c->gicr_ienabler0 = reg; |
| kvm_gicr_access(s, GICR_ICFGR1, ncpu, ®, false); |
| c->edge_trigger = half_unshuffle32(reg >> 1) << 16; |
| kvm_gic_line_level_access(s, 0, ncpu, ®, false); |
| c->level = reg; |
| kvm_gicr_access(s, GICR_ISPENDR0, ncpu, ®, false); |
| c->gicr_ipendr0 = reg; |
| kvm_gicr_access(s, GICR_ISACTIVER0, ncpu, ®, false); |
| c->gicr_iactiver0 = reg; |
| |
| for (i = 0; i < GIC_INTERNAL; i += 4) { |
| kvm_gicr_access(s, GICR_IPRIORITYR + i, ncpu, ®, false); |
| c->gicr_ipriorityr[i] = extract32(reg, 0, 8); |
| c->gicr_ipriorityr[i + 1] = extract32(reg, 8, 8); |
| c->gicr_ipriorityr[i + 2] = extract32(reg, 16, 8); |
| c->gicr_ipriorityr[i + 3] = extract32(reg, 24, 8); |
| } |
| } |
| |
| if (redist_typer & GICR_TYPER_PLPIS) { |
| for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { |
| GICv3CPUState *c = &s->cpu[ncpu]; |
| |
| kvm_gicr_access(s, GICR_PROPBASER, ncpu, ®l, false); |
| kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, ®h, false); |
| c->gicr_propbaser = ((uint64_t)regh << 32) | regl; |
| |
| kvm_gicr_access(s, GICR_PENDBASER, ncpu, ®l, false); |
| kvm_gicr_access(s, GICR_PENDBASER + 4, ncpu, ®h, false); |
| c->gicr_pendbaser = ((uint64_t)regh << 32) | regl; |
| } |
| } |
| |
| /* Distributor state (shared between all CPUs */ |
| |
| kvm_gicd_access(s, GICD_STATUSR, ®, false); |
| s->gicd_statusr[GICV3_NS] = reg; |
| |
| /* GICD_IGROUPRn -> s->group bitmap */ |
| kvm_dist_getbmp(s, GICD_IGROUPR, s->group); |
| |
| /* GICD_ISENABLERn -> s->enabled bitmap */ |
| kvm_dist_getbmp(s, GICD_ISENABLER, s->enabled); |
| |
| /* Line level of irq */ |
| kvm_gic_get_line_level_bmp(s, s->level); |
| /* GICD_ISPENDRn -> s->pending bitmap */ |
| kvm_dist_getbmp(s, GICD_ISPENDR, s->pending); |
| |
| /* GICD_ISACTIVERn -> s->active bitmap */ |
| kvm_dist_getbmp(s, GICD_ISACTIVER, s->active); |
| |
| /* GICD_ICFGRn -> s->trigger bitmap */ |
| kvm_dist_get_edge_trigger(s, GICD_ICFGR, s->edge_trigger); |
| |
| /* GICD_IPRIORITYRn -> s->gicd_ipriority[] */ |
| kvm_dist_get_priority(s, GICD_IPRIORITYR, s->gicd_ipriority); |
| |
| /* GICD_IROUTERn -> s->gicd_irouter[irq] */ |
| for (i = GIC_INTERNAL; i < s->num_irq; i++) { |
| uint32_t offset; |
| |
| offset = GICD_IROUTER + (sizeof(uint32_t) * i); |
| kvm_gicd_access(s, offset, ®l, false); |
| offset = GICD_IROUTER + (sizeof(uint32_t) * i) + 4; |
| kvm_gicd_access(s, offset, ®h, false); |
| s->gicd_irouter[i] = ((uint64_t)regh << 32) | regl; |
| } |
| |
| /***************************************************************** |
| * CPU Interface(s) State |
| */ |
| |
| for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { |
| GICv3CPUState *c = &s->cpu[ncpu]; |
| int num_pri_bits; |
| |
| kvm_gicc_access(s, ICC_SRE_EL1, ncpu, &c->icc_sre_el1, false); |
| kvm_gicc_access(s, ICC_CTLR_EL1, ncpu, |
| &c->icc_ctlr_el1[GICV3_NS], false); |
| kvm_gicc_access(s, ICC_IGRPEN0_EL1, ncpu, |
| &c->icc_igrpen[GICV3_G0], false); |
| kvm_gicc_access(s, ICC_IGRPEN1_EL1, ncpu, |
| &c->icc_igrpen[GICV3_G1NS], false); |
| kvm_gicc_access(s, ICC_PMR_EL1, ncpu, &c->icc_pmr_el1, false); |
| kvm_gicc_access(s, ICC_BPR0_EL1, ncpu, &c->icc_bpr[GICV3_G0], false); |
| kvm_gicc_access(s, ICC_BPR1_EL1, ncpu, &c->icc_bpr[GICV3_G1NS], false); |
| num_pri_bits = ((c->icc_ctlr_el1[GICV3_NS] & |
| ICC_CTLR_EL1_PRIBITS_MASK) >> |
| ICC_CTLR_EL1_PRIBITS_SHIFT) + 1; |
| |
| switch (num_pri_bits) { |
| case 7: |
| kvm_gicc_access(s, ICC_AP0R_EL1(3), ncpu, ®64, false); |
| c->icc_apr[GICV3_G0][3] = reg64; |
| kvm_gicc_access(s, ICC_AP0R_EL1(2), ncpu, ®64, false); |
| c->icc_apr[GICV3_G0][2] = reg64; |
| /* fall through */ |
| case 6: |
| kvm_gicc_access(s, ICC_AP0R_EL1(1), ncpu, ®64, false); |
| c->icc_apr[GICV3_G0][1] = reg64; |
| /* fall through */ |
| default: |
| kvm_gicc_access(s, ICC_AP0R_EL1(0), ncpu, ®64, false); |
| c->icc_apr[GICV3_G0][0] = reg64; |
| } |
| |
| switch (num_pri_bits) { |
| case 7: |
| kvm_gicc_access(s, ICC_AP1R_EL1(3), ncpu, ®64, false); |
| c->icc_apr[GICV3_G1NS][3] = reg64; |
| kvm_gicc_access(s, ICC_AP1R_EL1(2), ncpu, ®64, false); |
| c->icc_apr[GICV3_G1NS][2] = reg64; |
| /* fall through */ |
| case 6: |
| kvm_gicc_access(s, ICC_AP1R_EL1(1), ncpu, ®64, false); |
| c->icc_apr[GICV3_G1NS][1] = reg64; |
| /* fall through */ |
| default: |
| kvm_gicc_access(s, ICC_AP1R_EL1(0), ncpu, ®64, false); |
| c->icc_apr[GICV3_G1NS][0] = reg64; |
| } |
| } |
| } |
| |
| static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| GICv3State *s; |
| GICv3CPUState *c; |
| |
| c = (GICv3CPUState *)env->gicv3state; |
| s = c->gic; |
| |
| c->icc_pmr_el1 = 0; |
| /* |
| * Architecturally the reset value of the ICC_BPR registers |
| * is UNKNOWN. We set them all to 0 here; when the kernel |
| * uses these values to program the ICH_VMCR_EL2 fields that |
| * determine the guest-visible ICC_BPR register values, the |
| * hardware's "writing a value less than the minimum sets |
| * the field to the minimum value" behaviour will result in |
| * them effectively resetting to the correct minimum value |
| * for the host GIC. |
| */ |
| c->icc_bpr[GICV3_G0] = 0; |
| c->icc_bpr[GICV3_G1] = 0; |
| c->icc_bpr[GICV3_G1NS] = 0; |
| |
| c->icc_sre_el1 = 0x7; |
| memset(c->icc_apr, 0, sizeof(c->icc_apr)); |
| memset(c->icc_igrpen, 0, sizeof(c->icc_igrpen)); |
| |
| if (s->migration_blocker) { |
| return; |
| } |
| |
| /* Initialize to actual HW supported configuration */ |
| kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS, |
| KVM_VGIC_ATTR(ICC_CTLR_EL1, c->gicr_typer), |
| &c->icc_ctlr_el1[GICV3_NS], false, &error_abort); |
| |
| c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; |
| } |
| |
| static void kvm_arm_gicv3_reset_hold(Object *obj, ResetType type) |
| { |
| GICv3State *s = ARM_GICV3_COMMON(obj); |
| KVMARMGICv3Class *kgc = KVM_ARM_GICV3_GET_CLASS(s); |
| |
| DPRINTF("Reset\n"); |
| |
| if (kgc->parent_phases.hold) { |
| kgc->parent_phases.hold(obj, type); |
| } |
| |
| if (s->migration_blocker) { |
| DPRINTF("Cannot put kernel gic state, no kernel interface\n"); |
| return; |
| } |
| |
| kvm_arm_gicv3_put(s); |
| } |
| |
| /* |
| * CPU interface registers of GIC needs to be reset on CPU reset. |
| * For the calling arm_gicv3_icc_reset() on CPU reset, we register |
| * below ARMCPRegInfo. As we reset the whole cpu interface under single |
| * register reset, we define only one register of CPU interface instead |
| * of defining all the registers. |
| */ |
| static const ARMCPRegInfo gicv3_cpuif_reginfo[] = { |
| { .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4, |
| /* |
| * If ARM_CP_NOP is used, resetfn is not called, |
| * So ARM_CP_NO_RAW is appropriate type. |
| */ |
| .type = ARM_CP_NO_RAW, |
| .access = PL1_RW, |
| .readfn = arm_cp_read_zero, |
| .writefn = arm_cp_write_ignore, |
| /* |
| * We hang the whole cpu interface reset routine off here |
| * rather than parcelling it out into one little function |
| * per register |
| */ |
| .resetfn = arm_gicv3_icc_reset, |
| }, |
| }; |
| |
| /** |
| * vm_change_state_handler - VM change state callback aiming at flushing |
| * RDIST pending tables into guest RAM |
| * |
| * The tables get flushed to guest RAM whenever the VM gets stopped. |
| */ |
| static void vm_change_state_handler(void *opaque, bool running, |
| RunState state) |
| { |
| GICv3State *s = (GICv3State *)opaque; |
| Error *err = NULL; |
| int ret; |
| |
| if (running) { |
| return; |
| } |
| |
| ret = kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES, |
| NULL, true, &err); |
| if (err) { |
| error_report_err(err); |
| } |
| if (ret < 0 && ret != -EFAULT) { |
| abort(); |
| } |
| } |
| |
| |
| static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) |
| { |
| GICv3State *s = KVM_ARM_GICV3(dev); |
| KVMARMGICv3Class *kgc = KVM_ARM_GICV3_GET_CLASS(s); |
| bool multiple_redist_region_allowed; |
| Error *local_err = NULL; |
| int i; |
| |
| DPRINTF("kvm_arm_gicv3_realize\n"); |
| |
| kgc->parent_realize(dev, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| if (s->revision != 3) { |
| error_setg(errp, "unsupported GIC revision %d for in-kernel GIC", |
| s->revision); |
| } |
| |
| if (s->security_extn) { |
| error_setg(errp, "the in-kernel VGICv3 does not implement the " |
| "security extensions"); |
| return; |
| } |
| |
| if (s->nmi_support) { |
| error_setg(errp, "NMI is not supported with the in-kernel GIC"); |
| return; |
| } |
| |
| gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); |
| |
| for (i = 0; i < s->num_cpu; i++) { |
| ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i)); |
| |
| define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); |
| } |
| |
| /* Try to create the device via the device control API */ |
| s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V3, false); |
| if (s->dev_fd < 0) { |
| error_setg_errno(errp, -s->dev_fd, "error creating in-kernel VGIC"); |
| return; |
| } |
| |
| multiple_redist_region_allowed = |
| kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION); |
| |
| if (!multiple_redist_region_allowed && s->nb_redist_regions > 1) { |
| error_setg(errp, "Multiple VGICv3 redistributor regions are not " |
| "supported by this host kernel"); |
| error_append_hint(errp, "A maximum of %d VCPUs can be used", |
| s->redist_region_count[0]); |
| return; |
| } |
| |
| kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_NR_IRQS, |
| 0, &s->num_irq, true, &error_abort); |
| |
| /* Tell the kernel to complete VGIC initialization now */ |
| kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true, &error_abort); |
| |
| kvm_arm_register_device(&s->iomem_dist, -1, KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_DIST, s->dev_fd, 0); |
| |
| if (!multiple_redist_region_allowed) { |
| kvm_arm_register_device(&s->redist_regions[0].iomem, -1, |
| KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST, s->dev_fd, 0); |
| } else { |
| /* we register regions in reverse order as "devices" are inserted at |
| * the head of a QSLIST and the list is then popped from the head |
| * onwards by kvm_arm_machine_init_done() |
| */ |
| for (i = s->nb_redist_regions - 1; i >= 0; i--) { |
| /* Address mask made of the rdist region index and count */ |
| uint64_t addr_ormask = |
| i | ((uint64_t)s->redist_region_count[i] << 52); |
| |
| kvm_arm_register_device(&s->redist_regions[i].iomem, -1, |
| KVM_DEV_ARM_VGIC_GRP_ADDR, |
| KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, |
| s->dev_fd, addr_ormask); |
| } |
| } |
| |
| if (kvm_has_gsi_routing()) { |
| /* set up irq routing */ |
| for (i = 0; i < s->num_irq - GIC_INTERNAL; ++i) { |
| kvm_irqchip_add_irq_route(kvm_state, i, 0, i); |
| } |
| |
| kvm_gsi_routing_allowed = true; |
| |
| kvm_irqchip_commit_routes(kvm_state); |
| } |
| |
| if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_DIST_REGS, |
| GICD_CTLR)) { |
| error_setg(&s->migration_blocker, "This operating system kernel does " |
| "not support vGICv3 migration"); |
| if (migrate_add_blocker(&s->migration_blocker, errp) < 0) { |
| return; |
| } |
| } |
| if (kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, |
| KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES)) { |
| qemu_add_vm_change_state_handler(vm_change_state_handler, s); |
| } |
| } |
| |
| static void kvm_arm_gicv3_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| ARMGICv3CommonClass *agcc = ARM_GICV3_COMMON_CLASS(klass); |
| KVMARMGICv3Class *kgc = KVM_ARM_GICV3_CLASS(klass); |
| |
| agcc->pre_save = kvm_arm_gicv3_get; |
| agcc->post_load = kvm_arm_gicv3_put; |
| device_class_set_parent_realize(dc, kvm_arm_gicv3_realize, |
| &kgc->parent_realize); |
| resettable_class_set_parent_phases(rc, NULL, kvm_arm_gicv3_reset_hold, NULL, |
| &kgc->parent_phases); |
| } |
| |
| static const TypeInfo kvm_arm_gicv3_info = { |
| .name = TYPE_KVM_ARM_GICV3, |
| .parent = TYPE_ARM_GICV3_COMMON, |
| .instance_size = sizeof(GICv3State), |
| .class_init = kvm_arm_gicv3_class_init, |
| .class_size = sizeof(KVMARMGICv3Class), |
| }; |
| |
| static void kvm_arm_gicv3_register_types(void) |
| { |
| type_register_static(&kvm_arm_gicv3_info); |
| } |
| |
| type_init(kvm_arm_gicv3_register_types) |