hw/intc/arm_gicv3_common.c - qemu - Git at Google

 /*
  * ARM GICv3 support - common bits of emulated and KVM kernel model
  *
  * Copyright (c) 2012 Linaro Limited
  * Copyright (c) 2015 Huawei.
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  * Written by Peter Maydell
  * Reworked for GICv3 by Shlomo Pongratz and Pavel Fedin
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, see <http://www.gnu.org/licenses/>.
  */

 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "qemu/module.h"
 #include "qemu/error-report.h"
 #include "hw/core/cpu.h"
 #include "hw/intc/arm_gicv3_common.h"
 #include "hw/qdev-properties.h"
 #include "migration/vmstate.h"
 #include "gicv3_internal.h"
 #include "hw/arm/linux-boot-if.h"
 #include "sysemu/kvm.h"


 static void gicv3_gicd_no_migration_shift_bug_post_load(GICv3State *cs)
 {
     if (cs->gicd_no_migration_shift_bug) {
         return;
     }

     /* Older versions of QEMU had a bug in the handling of state save/restore
      * to the KVM GICv3: they got the offset in the bitmap arrays wrong,
      * so that instead of the data for external interrupts 32 and up
      * starting at bit position 32 in the bitmap, it started at bit
      * position 64. If we're receiving data from a QEMU with that bug,
      * we must move the data down into the right place.
      */
     memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8,
             sizeof(cs->group) - GIC_INTERNAL / 8);
     memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8,
             sizeof(cs->grpmod) - GIC_INTERNAL / 8);
     memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8,
             sizeof(cs->enabled) - GIC_INTERNAL / 8);
     memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8,
             sizeof(cs->pending) - GIC_INTERNAL / 8);
     memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8,
             sizeof(cs->active) - GIC_INTERNAL / 8);
     memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8,
             sizeof(cs->edge_trigger) - GIC_INTERNAL / 8);

     /*
      * While this new version QEMU doesn't have this kind of bug as we fix it,
      * so it needs to set the flag to true to indicate that and it's necessary
      * for next migration to work from this new version QEMU.
      */
     cs->gicd_no_migration_shift_bug = true;
 }

 static int gicv3_pre_save(void *opaque)
 {
     GICv3State *s = (GICv3State *)opaque;
     ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);

     if (c->pre_save) {
         c->pre_save(s);
     }

     return 0;
 }

 static int gicv3_post_load(void *opaque, int version_id)
 {
     GICv3State *s = (GICv3State *)opaque;
     ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);

     gicv3_gicd_no_migration_shift_bug_post_load(s);

     if (c->post_load) {
         c->post_load(s);
     }
     return 0;
 }

 static bool virt_state_needed(void *opaque)
 {
     GICv3CPUState *cs = opaque;

     return cs->num_list_regs != 0;
 }

 static const VMStateDescription vmstate_gicv3_cpu_virt = {
     .name = "arm_gicv3_cpu/virt",
     .version_id = 1,
     .minimum_version_id = 1,
     .needed = virt_state_needed,
     .fields = (const VMStateField[]) {
         VMSTATE_UINT64_2DARRAY(ich_apr, GICv3CPUState, 3, 4),
         VMSTATE_UINT64(ich_hcr_el2, GICv3CPUState),
         VMSTATE_UINT64_ARRAY(ich_lr_el2, GICv3CPUState, GICV3_LR_MAX),
         VMSTATE_UINT64(ich_vmcr_el2, GICv3CPUState),
         VMSTATE_END_OF_LIST()
     }
 };

 static int vmstate_gicv3_cpu_pre_load(void *opaque)
 {
     GICv3CPUState *cs = opaque;

    /*
     * If the sre_el1 subsection is not transferred this
     * means SRE_EL1 is 0x7 (which might not be the same as
     * our reset value).
     */
     cs->icc_sre_el1 = 0x7;
     return 0;
 }

 static bool icc_sre_el1_reg_needed(void *opaque)
 {
     GICv3CPUState *cs = opaque;

     return cs->icc_sre_el1 != 7;
 }

 const VMStateDescription vmstate_gicv3_cpu_sre_el1 = {
     .name = "arm_gicv3_cpu/sre_el1",
     .version_id = 1,
     .minimum_version_id = 1,
     .needed = icc_sre_el1_reg_needed,
     .fields = (const VMStateField[]) {
         VMSTATE_UINT64(icc_sre_el1, GICv3CPUState),
         VMSTATE_END_OF_LIST()
     }
 };

 static bool gicv4_needed(void *opaque)
 {
     GICv3CPUState *cs = opaque;

     return cs->gic->revision > 3;
 }

 const VMStateDescription vmstate_gicv3_gicv4 = {
     .name = "arm_gicv3_cpu/gicv4",
     .version_id = 1,
     .minimum_version_id = 1,
     .needed = gicv4_needed,
     .fields = (const VMStateField[]) {
         VMSTATE_UINT64(gicr_vpropbaser, GICv3CPUState),
         VMSTATE_UINT64(gicr_vpendbaser, GICv3CPUState),
         VMSTATE_END_OF_LIST()
     }
 };

 static const VMStateDescription vmstate_gicv3_cpu = {
     .name = "arm_gicv3_cpu",
     .version_id = 1,
     .minimum_version_id = 1,
     .pre_load = vmstate_gicv3_cpu_pre_load,
     .fields = (const VMStateField[]) {
         VMSTATE_UINT32(level, GICv3CPUState),
         VMSTATE_UINT32(gicr_ctlr, GICv3CPUState),
         VMSTATE_UINT32_ARRAY(gicr_statusr, GICv3CPUState, 2),
         VMSTATE_UINT32(gicr_waker, GICv3CPUState),
         VMSTATE_UINT64(gicr_propbaser, GICv3CPUState),
         VMSTATE_UINT64(gicr_pendbaser, GICv3CPUState),
         VMSTATE_UINT32(gicr_igroupr0, GICv3CPUState),
         VMSTATE_UINT32(gicr_ienabler0, GICv3CPUState),
         VMSTATE_UINT32(gicr_ipendr0, GICv3CPUState),
         VMSTATE_UINT32(gicr_iactiver0, GICv3CPUState),
         VMSTATE_UINT32(edge_trigger, GICv3CPUState),
         VMSTATE_UINT32(gicr_igrpmodr0, GICv3CPUState),
         VMSTATE_UINT32(gicr_nsacr, GICv3CPUState),
         VMSTATE_UINT8_ARRAY(gicr_ipriorityr, GICv3CPUState, GIC_INTERNAL),
         VMSTATE_UINT64_ARRAY(icc_ctlr_el1, GICv3CPUState, 2),
         VMSTATE_UINT64(icc_pmr_el1, GICv3CPUState),
         VMSTATE_UINT64_ARRAY(icc_bpr, GICv3CPUState, 3),
         VMSTATE_UINT64_2DARRAY(icc_apr, GICv3CPUState, 3, 4),
         VMSTATE_UINT64_ARRAY(icc_igrpen, GICv3CPUState, 3),
         VMSTATE_UINT64(icc_ctlr_el3, GICv3CPUState),
         VMSTATE_END_OF_LIST()
     },
     .subsections = (const VMStateDescription * const []) {
         &vmstate_gicv3_cpu_virt,
         &vmstate_gicv3_cpu_sre_el1,
         &vmstate_gicv3_gicv4,
         NULL
     }
 };

 static int gicv3_pre_load(void *opaque)
 {
     GICv3State *cs = opaque;

    /*
     * The gicd_no_migration_shift_bug flag is used for migration compatibility
     * for old version QEMU which may have the GICD bmp shift bug under KVM mode.
     * Strictly, what we want to know is whether the migration source is using
     * KVM. Since we don't have any way to determine that, we look at whether the
     * destination is using KVM; this is close enough because for the older QEMU
     * versions with this bug KVM -> TCG migration didn't work anyway. If the
     * source is a newer QEMU without this bug it will transmit the migration
     * subsection which sets the flag to true; otherwise it will remain set to
     * the value we select here.
     */
     if (kvm_enabled()) {
         cs->gicd_no_migration_shift_bug = false;
     }

     return 0;
 }

 static bool needed_always(void *opaque)
 {
     return true;
 }

 const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = {
     .name = "arm_gicv3/gicd_no_migration_shift_bug",
     .version_id = 1,
     .minimum_version_id = 1,
     .needed = needed_always,
     .fields = (const VMStateField[]) {
         VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State),
         VMSTATE_END_OF_LIST()
     }
 };

 static const VMStateDescription vmstate_gicv3 = {
     .name = "arm_gicv3",
     .version_id = 1,
     .minimum_version_id = 1,
     .pre_load = gicv3_pre_load,
     .pre_save = gicv3_pre_save,
     .post_load = gicv3_post_load,
     .priority = MIG_PRI_GICV3,
     .fields = (const VMStateField[]) {
         VMSTATE_UINT32(gicd_ctlr, GICv3State),
         VMSTATE_UINT32_ARRAY(gicd_statusr, GICv3State, 2),
         VMSTATE_UINT32_ARRAY(group, GICv3State, GICV3_BMP_SIZE),
         VMSTATE_UINT32_ARRAY(grpmod, GICv3State, GICV3_BMP_SIZE),
         VMSTATE_UINT32_ARRAY(enabled, GICv3State, GICV3_BMP_SIZE),
         VMSTATE_UINT32_ARRAY(pending, GICv3State, GICV3_BMP_SIZE),
         VMSTATE_UINT32_ARRAY(active, GICv3State, GICV3_BMP_SIZE),
         VMSTATE_UINT32_ARRAY(level, GICv3State, GICV3_BMP_SIZE),
         VMSTATE_UINT32_ARRAY(edge_trigger, GICv3State, GICV3_BMP_SIZE),
         VMSTATE_UINT8_ARRAY(gicd_ipriority, GICv3State, GICV3_MAXIRQ),
         VMSTATE_UINT64_ARRAY(gicd_irouter, GICv3State, GICV3_MAXIRQ),
         VMSTATE_UINT32_ARRAY(gicd_nsacr, GICv3State,
                              DIV_ROUND_UP(GICV3_MAXIRQ, 16)),
         VMSTATE_STRUCT_VARRAY_POINTER_UINT32(cpu, GICv3State, num_cpu,
                                              vmstate_gicv3_cpu, GICv3CPUState),
         VMSTATE_END_OF_LIST()
     },
     .subsections = (const VMStateDescription * const []) {
         &vmstate_gicv3_gicd_no_migration_shift_bug,
         NULL
     }
 };

 void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
                               const MemoryRegionOps *ops)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(s);
     int i;
     int cpuidx;

     /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
      * GPIO array layout is thus:
      *  [0..N-1] spi
      *  [N..N+31] PPIs for CPU 0
      *  [N+32..N+63] PPIs for CPU 1
      *   ...
      */
     i = s->num_irq - GIC_INTERNAL + GIC_INTERNAL * s->num_cpu;
     qdev_init_gpio_in(DEVICE(s), handler, i);

     for (i = 0; i < s->num_cpu; i++) {
         sysbus_init_irq(sbd, &s->cpu[i].parent_irq);
     }
     for (i = 0; i < s->num_cpu; i++) {
         sysbus_init_irq(sbd, &s->cpu[i].parent_fiq);
     }
     for (i = 0; i < s->num_cpu; i++) {
         sysbus_init_irq(sbd, &s->cpu[i].parent_virq);
     }
     for (i = 0; i < s->num_cpu; i++) {
         sysbus_init_irq(sbd, &s->cpu[i].parent_vfiq);
     }

     memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s,
                           "gicv3_dist", 0x10000);
     sysbus_init_mmio(sbd, &s->iomem_dist);

     s->redist_regions = g_new0(GICv3RedistRegion, s->nb_redist_regions);
     cpuidx = 0;
     for (i = 0; i < s->nb_redist_regions; i++) {
         char *name = g_strdup_printf("gicv3_redist_region[%d]", i);
         GICv3RedistRegion *region = &s->redist_regions[i];

         region->gic = s;
         region->cpuidx = cpuidx;
         cpuidx += s->redist_region_count[i];

         memory_region_init_io(&region->iomem, OBJECT(s),
                               ops ? &ops[1] : NULL, region, name,
                               s->redist_region_count[i] * gicv3_redist_size(s));
         sysbus_init_mmio(sbd, &region->iomem);
         g_free(name);
     }
 }

 static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
 {
     GICv3State *s = ARM_GICV3_COMMON(dev);
     int i, rdist_capacity, cpuidx;

     /*
      * This GIC device supports only revisions 3 and 4. The GICv1/v2
      * is a separate device.
      * Note that subclasses of this device may impose further restrictions
      * on the GIC revision: notably, the in-kernel KVM GIC doesn't
      * support GICv4.
      */
     if (s->revision != 3 && s->revision != 4) {
         error_setg(errp, "unsupported GIC revision %d", s->revision);
         return;
     }

     if (s->num_irq > GICV3_MAXIRQ) {
         error_setg(errp,
                    "requested %u interrupt lines exceeds GIC maximum %d",
                    s->num_irq, GICV3_MAXIRQ);
         return;
     }
     if (s->num_irq < GIC_INTERNAL) {
         error_setg(errp,
                    "requested %u interrupt lines is below GIC minimum %d",
                    s->num_irq, GIC_INTERNAL);
         return;
     }
     if (s->num_cpu == 0) {
         error_setg(errp, "num-cpu must be at least 1");
         return;
     }

     /* ITLinesNumber is represented as (N / 32) - 1, so this is an
      * implementation imposed restriction, not an architectural one,
      * so we don't have to deal with bitfields where only some of the
      * bits in a 32-bit word should be valid.
      */
     if (s->num_irq % 32) {
         error_setg(errp,
                    "%d interrupt lines unsupported: not divisible by 32",
                    s->num_irq);
         return;
     }

     if (s->lpi_enable && !s->dma) {
         error_setg(errp, "Redist-ITS: Guest 'sysmem' reference link not set");
         return;
     }

     rdist_capacity = 0;
     for (i = 0; i < s->nb_redist_regions; i++) {
         rdist_capacity += s->redist_region_count[i];
     }
     if (rdist_capacity != s->num_cpu) {
         error_setg(errp, "Capacity of the redist regions(%d) "
                    "does not match the number of vcpus(%d)",
                    rdist_capacity, s->num_cpu);
         return;
     }

     if (s->lpi_enable) {
         address_space_init(&s->dma_as, s->dma,
                            "gicv3-its-sysmem");
     }

     s->cpu = g_new0(GICv3CPUState, s->num_cpu);

     for (i = 0; i < s->num_cpu; i++) {
         CPUState *cpu = qemu_get_cpu(i);
         uint64_t cpu_affid;

         s->cpu[i].cpu = cpu;
         s->cpu[i].gic = s;
         /* Store GICv3CPUState in CPUARMState gicv3state pointer */
         gicv3_set_gicv3state(cpu, &s->cpu[i]);

         /* Pre-construct the GICR_TYPER:
          * For our implementation:
          *  Top 32 bits are the affinity value of the associated CPU
          *  CommonLPIAff == 01 (redistributors with same Aff3 share LPI table)
          *  Processor_Number == CPU index starting from 0
          *  DPGS == 0 (GICR_CTLR.DPG* not supported)
          *  Last == 1 if this is the last redistributor in a series of
          *            contiguous redistributor pages
          *  DirectLPI == 0 (direct injection of LPIs not supported)
          *  VLPIS == 1 if vLPIs supported (GICv4 and up)
          *  PLPIS == 1 if LPIs supported
          */
         cpu_affid = object_property_get_uint(OBJECT(cpu), "mp-affinity", NULL);

         /* The CPU mp-affinity property is in MPIDR register format; squash
          * the affinity bytes into 32 bits as the GICR_TYPER has them.
          */
         cpu_affid = ((cpu_affid & 0xFF00000000ULL) >> 8) |
                      (cpu_affid & 0xFFFFFF);
         s->cpu[i].gicr_typer = (cpu_affid << 32) |
             (1 << 24) |
             (i << 8);

         if (s->lpi_enable) {
             s->cpu[i].gicr_typer |= GICR_TYPER_PLPIS;
             if (s->revision > 3) {
                 s->cpu[i].gicr_typer |= GICR_TYPER_VLPIS;
             }
         }
     }

     /*
      * Now go through and set GICR_TYPER.Last for the final
      * redistributor in each region.
      */
     cpuidx = 0;
     for (i = 0; i < s->nb_redist_regions; i++) {
         cpuidx += s->redist_region_count[i];
         s->cpu[cpuidx - 1].gicr_typer |= GICR_TYPER_LAST;
     }

     s->itslist = g_ptr_array_new();
 }

 static void arm_gicv3_finalize(Object *obj)
 {
     GICv3State *s = ARM_GICV3_COMMON(obj);

     g_free(s->redist_region_count);
 }

 static void arm_gicv3_common_reset_hold(Object *obj)
 {
     GICv3State *s = ARM_GICV3_COMMON(obj);
     int i;

     for (i = 0; i < s->num_cpu; i++) {
         GICv3CPUState *cs = &s->cpu[i];

         cs->level = 0;
         cs->gicr_ctlr = 0;
         if (s->lpi_enable) {
             /* Our implementation supports clearing GICR_CTLR.EnableLPIs */
             cs->gicr_ctlr |= GICR_CTLR_CES;
         }
         cs->gicr_statusr[GICV3_S] = 0;
         cs->gicr_statusr[GICV3_NS] = 0;
         cs->gicr_waker = GICR_WAKER_ProcessorSleep | GICR_WAKER_ChildrenAsleep;
         cs->gicr_propbaser = 0;
         cs->gicr_pendbaser = 0;
         cs->gicr_vpropbaser = 0;
         cs->gicr_vpendbaser = 0;
         /* If we're resetting a TZ-aware GIC as if secure firmware
          * had set it up ready to start a kernel in non-secure, we
          * need to set interrupts to group 1 so the kernel can use them.
          * Otherwise they reset to group 0 like the hardware.
          */
         if (s->irq_reset_nonsecure) {
             cs->gicr_igroupr0 = 0xffffffff;
         } else {
             cs->gicr_igroupr0 = 0;
         }

         cs->gicr_ienabler0 = 0;
         cs->gicr_ipendr0 = 0;
         cs->gicr_iactiver0 = 0;
         cs->edge_trigger = 0xffff;
         cs->gicr_igrpmodr0 = 0;
         cs->gicr_nsacr = 0;
         memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));

         cs->hppi.prio = 0xff;
         cs->hpplpi.prio = 0xff;
         cs->hppvlpi.prio = 0xff;

         /* State in the CPU interface must *not* be reset here, because it
          * is part of the CPU's reset domain, not the GIC device's.
          */
     }

     /* For our implementation affinity routing is always enabled */
     if (s->security_extn) {
         s->gicd_ctlr = GICD_CTLR_ARE_S | GICD_CTLR_ARE_NS;
     } else {
         s->gicd_ctlr = GICD_CTLR_DS | GICD_CTLR_ARE;
     }

     s->gicd_statusr[GICV3_S] = 0;
     s->gicd_statusr[GICV3_NS] = 0;

     memset(s->group, 0, sizeof(s->group));
     memset(s->grpmod, 0, sizeof(s->grpmod));
     memset(s->enabled, 0, sizeof(s->enabled));
     memset(s->pending, 0, sizeof(s->pending));
     memset(s->active, 0, sizeof(s->active));
     memset(s->level, 0, sizeof(s->level));
     memset(s->edge_trigger, 0, sizeof(s->edge_trigger));
     memset(s->gicd_ipriority, 0, sizeof(s->gicd_ipriority));
     memset(s->gicd_irouter, 0, sizeof(s->gicd_irouter));
     memset(s->gicd_nsacr, 0, sizeof(s->gicd_nsacr));
     /* GICD_IROUTER are UNKNOWN at reset so in theory the guest must
      * write these to get sane behaviour and we need not populate the
      * pointer cache here; however having the cache be different for
      * "happened to be 0 from reset" and "guest wrote 0" would be
      * too confusing.
      */
     gicv3_cache_all_target_cpustates(s);

     if (s->irq_reset_nonsecure) {
         /* If we're resetting a TZ-aware GIC as if secure firmware
          * had set it up ready to start a kernel in non-secure, we
          * need to set interrupts to group 1 so the kernel can use them.
          * Otherwise they reset to group 0 like the hardware.
          */
         for (i = GIC_INTERNAL; i < s->num_irq; i++) {
             gicv3_gicd_group_set(s, i);
         }
     }
     s->gicd_no_migration_shift_bug = true;
 }

 static void arm_gic_common_linux_init(ARMLinuxBootIf *obj,
                                       bool secure_boot)
 {
     GICv3State *s = ARM_GICV3_COMMON(obj);

     if (s->security_extn && !secure_boot) {
         /* We're directly booting a kernel into NonSecure. If this GIC
          * implements the security extensions then we must configure it
          * to have all the interrupts be NonSecure (this is a job that
          * is done by the Secure boot firmware in real hardware, and in
          * this mode QEMU is acting as a minimalist firmware-and-bootloader
          * equivalent).
          */
         s->irq_reset_nonsecure = true;
     }
 }

 static Property arm_gicv3_common_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
     DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
     DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
     DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
     DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
     /*
      * Compatibility property: force 8 bits of physical priority, even
      * if the CPU being emulated should have fewer.
      */
     DEFINE_PROP_BOOL("force-8-bit-prio", GICv3State, force_8bit_prio, 0),
     DEFINE_PROP_ARRAY("redist-region-count", GICv3State, nb_redist_regions,
                       redist_region_count, qdev_prop_uint32, uint32_t),
     DEFINE_PROP_LINK("sysmem", GICv3State, dma, TYPE_MEMORY_REGION,
                      MemoryRegion *),
     DEFINE_PROP_END_OF_LIST(),
 };

 static void arm_gicv3_common_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
     ResettableClass *rc = RESETTABLE_CLASS(klass);
     ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass);

     rc->phases.hold = arm_gicv3_common_reset_hold;
     dc->realize = arm_gicv3_common_realize;
     device_class_set_props(dc, arm_gicv3_common_properties);
     dc->vmsd = &vmstate_gicv3;
     albifc->arm_linux_init = arm_gic_common_linux_init;
 }

 static const TypeInfo arm_gicv3_common_type = {
     .name = TYPE_ARM_GICV3_COMMON,
     .parent = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(GICv3State),
     .class_size = sizeof(ARMGICv3CommonClass),
     .class_init = arm_gicv3_common_class_init,
     .instance_finalize = arm_gicv3_finalize,
     .abstract = true,
     .interfaces = (InterfaceInfo []) {
         { TYPE_ARM_LINUX_BOOT_IF },
         { },
     },
 };

 static void register_types(void)
 {
     type_register_static(&arm_gicv3_common_type);
 }

 type_init(register_types)

 const char *gicv3_class_name(void)
 {
     if (kvm_irqchip_in_kernel()) {
         return "kvm-arm-gicv3";
     } else {
         if (kvm_enabled()) {
             error_report("Userspace GICv3 is not supported with KVM");
             exit(1);
         }
         return "arm-gicv3";
     }
 }
	/*
	* ARM GICv3 support - common bits of emulated and KVM kernel model
	*
	* Copyright (c) 2012 Linaro Limited
	* Copyright (c) 2015 Huawei.
	* Copyright (c) 2015 Samsung Electronics Co., Ltd.
	* Written by Peter Maydell
	* Reworked for GICv3 by Shlomo Pongratz and Pavel Fedin
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation, either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, see <http://www.gnu.org/licenses/>.
	*/

	#include "qemu/osdep.h"
	#include "qapi/error.h"
	#include "qemu/module.h"
	#include "qemu/error-report.h"
	#include "hw/core/cpu.h"
	#include "hw/intc/arm_gicv3_common.h"
	#include "hw/qdev-properties.h"
	#include "migration/vmstate.h"
	#include "gicv3_internal.h"
	#include "hw/arm/linux-boot-if.h"
	#include "sysemu/kvm.h"


	static void gicv3_gicd_no_migration_shift_bug_post_load(GICv3State *cs)
	{
	if (cs->gicd_no_migration_shift_bug) {
	return;
	}

	/* Older versions of QEMU had a bug in the handling of state save/restore
	* to the KVM GICv3: they got the offset in the bitmap arrays wrong,
	* so that instead of the data for external interrupts 32 and up
	* starting at bit position 32 in the bitmap, it started at bit
	* position 64. If we're receiving data from a QEMU with that bug,
	* we must move the data down into the right place.
	*/
	memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8,
	sizeof(cs->group) - GIC_INTERNAL / 8);
	memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8,
	sizeof(cs->grpmod) - GIC_INTERNAL / 8);
	memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8,
	sizeof(cs->enabled) - GIC_INTERNAL / 8);
	memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8,
	sizeof(cs->pending) - GIC_INTERNAL / 8);
	memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8,
	sizeof(cs->active) - GIC_INTERNAL / 8);
	memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8,
	sizeof(cs->edge_trigger) - GIC_INTERNAL / 8);

	/*
	* While this new version QEMU doesn't have this kind of bug as we fix it,
	* so it needs to set the flag to true to indicate that and it's necessary
	* for next migration to work from this new version QEMU.
	*/
	cs->gicd_no_migration_shift_bug = true;
	}

	static int gicv3_pre_save(void *opaque)
	{
	GICv3State s = (GICv3State )opaque;
	ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);

	if (c->pre_save) {
	c->pre_save(s);
	}

	return 0;
	}

	static int gicv3_post_load(void *opaque, int version_id)
	{
	GICv3State s = (GICv3State )opaque;
	ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s);

	gicv3_gicd_no_migration_shift_bug_post_load(s);

	if (c->post_load) {
	c->post_load(s);
	}
	return 0;
	}

	static bool virt_state_needed(void *opaque)
	{
	GICv3CPUState *cs = opaque;

	return cs->num_list_regs != 0;
	}

	static const VMStateDescription vmstate_gicv3_cpu_virt = {
	.name = "arm_gicv3_cpu/virt",
	.version_id = 1,
	.minimum_version_id = 1,
	.needed = virt_state_needed,
	.fields = (const VMStateField[]) {
	VMSTATE_UINT64_2DARRAY(ich_apr, GICv3CPUState, 3, 4),
	VMSTATE_UINT64(ich_hcr_el2, GICv3CPUState),
	VMSTATE_UINT64_ARRAY(ich_lr_el2, GICv3CPUState, GICV3_LR_MAX),
	VMSTATE_UINT64(ich_vmcr_el2, GICv3CPUState),
	VMSTATE_END_OF_LIST()
	}
	};

	static int vmstate_gicv3_cpu_pre_load(void *opaque)
	{
	GICv3CPUState *cs = opaque;

	/*
	* If the sre_el1 subsection is not transferred this
	* means SRE_EL1 is 0x7 (which might not be the same as
	* our reset value).
	*/
	cs->icc_sre_el1 = 0x7;
	return 0;
	}

	static bool icc_sre_el1_reg_needed(void *opaque)
	{
	GICv3CPUState *cs = opaque;

	return cs->icc_sre_el1 != 7;
	}

	const VMStateDescription vmstate_gicv3_cpu_sre_el1 = {
	.name = "arm_gicv3_cpu/sre_el1",
	.version_id = 1,
	.minimum_version_id = 1,
	.needed = icc_sre_el1_reg_needed,
	.fields = (const VMStateField[]) {
	VMSTATE_UINT64(icc_sre_el1, GICv3CPUState),
	VMSTATE_END_OF_LIST()
	}
	};

	static bool gicv4_needed(void *opaque)
	{
	GICv3CPUState *cs = opaque;

	return cs->gic->revision > 3;
	}

	const VMStateDescription vmstate_gicv3_gicv4 = {
	.name = "arm_gicv3_cpu/gicv4",
	.version_id = 1,
	.minimum_version_id = 1,
	.needed = gicv4_needed,
	.fields = (const VMStateField[]) {
	VMSTATE_UINT64(gicr_vpropbaser, GICv3CPUState),
	VMSTATE_UINT64(gicr_vpendbaser, GICv3CPUState),
	VMSTATE_END_OF_LIST()
	}
	};

	static const VMStateDescription vmstate_gicv3_cpu = {
	.name = "arm_gicv3_cpu",
	.version_id = 1,
	.minimum_version_id = 1,
	.pre_load = vmstate_gicv3_cpu_pre_load,
	.fields = (const VMStateField[]) {
	VMSTATE_UINT32(level, GICv3CPUState),
	VMSTATE_UINT32(gicr_ctlr, GICv3CPUState),
	VMSTATE_UINT32_ARRAY(gicr_statusr, GICv3CPUState, 2),
	VMSTATE_UINT32(gicr_waker, GICv3CPUState),
	VMSTATE_UINT64(gicr_propbaser, GICv3CPUState),
	VMSTATE_UINT64(gicr_pendbaser, GICv3CPUState),
	VMSTATE_UINT32(gicr_igroupr0, GICv3CPUState),
	VMSTATE_UINT32(gicr_ienabler0, GICv3CPUState),
	VMSTATE_UINT32(gicr_ipendr0, GICv3CPUState),
	VMSTATE_UINT32(gicr_iactiver0, GICv3CPUState),
	VMSTATE_UINT32(edge_trigger, GICv3CPUState),
	VMSTATE_UINT32(gicr_igrpmodr0, GICv3CPUState),
	VMSTATE_UINT32(gicr_nsacr, GICv3CPUState),
	VMSTATE_UINT8_ARRAY(gicr_ipriorityr, GICv3CPUState, GIC_INTERNAL),
	VMSTATE_UINT64_ARRAY(icc_ctlr_el1, GICv3CPUState, 2),
	VMSTATE_UINT64(icc_pmr_el1, GICv3CPUState),
	VMSTATE_UINT64_ARRAY(icc_bpr, GICv3CPUState, 3),
	VMSTATE_UINT64_2DARRAY(icc_apr, GICv3CPUState, 3, 4),
	VMSTATE_UINT64_ARRAY(icc_igrpen, GICv3CPUState, 3),
	VMSTATE_UINT64(icc_ctlr_el3, GICv3CPUState),
	VMSTATE_END_OF_LIST()
	},
	.subsections = (const VMStateDescription * const []) {
	&vmstate_gicv3_cpu_virt,
	&vmstate_gicv3_cpu_sre_el1,
	&vmstate_gicv3_gicv4,
	NULL
	}
	};

	static int gicv3_pre_load(void *opaque)
	{
	GICv3State *cs = opaque;

	/*
	* The gicd_no_migration_shift_bug flag is used for migration compatibility
	* for old version QEMU which may have the GICD bmp shift bug under KVM mode.
	* Strictly, what we want to know is whether the migration source is using
	* KVM. Since we don't have any way to determine that, we look at whether the
	* destination is using KVM; this is close enough because for the older QEMU
	* versions with this bug KVM -> TCG migration didn't work anyway. If the
	* source is a newer QEMU without this bug it will transmit the migration
	* subsection which sets the flag to true; otherwise it will remain set to
	* the value we select here.
	*/
	if (kvm_enabled()) {
	cs->gicd_no_migration_shift_bug = false;
	}

	return 0;
	}

	static bool needed_always(void *opaque)
	{
	return true;
	}

	const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = {
	.name = "arm_gicv3/gicd_no_migration_shift_bug",
	.version_id = 1,
	.minimum_version_id = 1,
	.needed = needed_always,
	.fields = (const VMStateField[]) {
	VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State),
	VMSTATE_END_OF_LIST()
	}
	};

	static const VMStateDescription vmstate_gicv3 = {
	.name = "arm_gicv3",
	.version_id = 1,
	.minimum_version_id = 1,
	.pre_load = gicv3_pre_load,
	.pre_save = gicv3_pre_save,
	.post_load = gicv3_post_load,
	.priority = MIG_PRI_GICV3,
	.fields = (const VMStateField[]) {
	VMSTATE_UINT32(gicd_ctlr, GICv3State),
	VMSTATE_UINT32_ARRAY(gicd_statusr, GICv3State, 2),
	VMSTATE_UINT32_ARRAY(group, GICv3State, GICV3_BMP_SIZE),
	VMSTATE_UINT32_ARRAY(grpmod, GICv3State, GICV3_BMP_SIZE),
	VMSTATE_UINT32_ARRAY(enabled, GICv3State, GICV3_BMP_SIZE),
	VMSTATE_UINT32_ARRAY(pending, GICv3State, GICV3_BMP_SIZE),
	VMSTATE_UINT32_ARRAY(active, GICv3State, GICV3_BMP_SIZE),
	VMSTATE_UINT32_ARRAY(level, GICv3State, GICV3_BMP_SIZE),
	VMSTATE_UINT32_ARRAY(edge_trigger, GICv3State, GICV3_BMP_SIZE),
	VMSTATE_UINT8_ARRAY(gicd_ipriority, GICv3State, GICV3_MAXIRQ),
	VMSTATE_UINT64_ARRAY(gicd_irouter, GICv3State, GICV3_MAXIRQ),
	VMSTATE_UINT32_ARRAY(gicd_nsacr, GICv3State,
	DIV_ROUND_UP(GICV3_MAXIRQ, 16)),
	VMSTATE_STRUCT_VARRAY_POINTER_UINT32(cpu, GICv3State, num_cpu,
	vmstate_gicv3_cpu, GICv3CPUState),
	VMSTATE_END_OF_LIST()
	},
	.subsections = (const VMStateDescription * const []) {
	&vmstate_gicv3_gicd_no_migration_shift_bug,
	NULL
	}
	};

	void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
	const MemoryRegionOps *ops)
	{
	SysBusDevice *sbd = SYS_BUS_DEVICE(s);
	int i;
	int cpuidx;

	/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
	* GPIO array layout is thus:
	* [0..N-1] spi
	* [N..N+31] PPIs for CPU 0
	* [N+32..N+63] PPIs for CPU 1
	* ...
	*/
	i = s->num_irq - GIC_INTERNAL + GIC_INTERNAL * s->num_cpu;
	qdev_init_gpio_in(DEVICE(s), handler, i);

	for (i = 0; i < s->num_cpu; i++) {
	sysbus_init_irq(sbd, &s->cpu[i].parent_irq);
	}
	for (i = 0; i < s->num_cpu; i++) {
	sysbus_init_irq(sbd, &s->cpu[i].parent_fiq);
	}
	for (i = 0; i < s->num_cpu; i++) {
	sysbus_init_irq(sbd, &s->cpu[i].parent_virq);
	}
	for (i = 0; i < s->num_cpu; i++) {
	sysbus_init_irq(sbd, &s->cpu[i].parent_vfiq);
	}

	memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s,
	"gicv3_dist", 0x10000);
	sysbus_init_mmio(sbd, &s->iomem_dist);

	s->redist_regions = g_new0(GICv3RedistRegion, s->nb_redist_regions);
	cpuidx = 0;
	for (i = 0; i < s->nb_redist_regions; i++) {
	char *name = g_strdup_printf("gicv3_redist_region[%d]", i);
	GICv3RedistRegion *region = &s->redist_regions[i];

	region->gic = s;
	region->cpuidx = cpuidx;
	cpuidx += s->redist_region_count[i];

	memory_region_init_io(&region->iomem, OBJECT(s),
	ops ? &ops[1] : NULL, region, name,
	s->redist_region_count[i] * gicv3_redist_size(s));
	sysbus_init_mmio(sbd, &region->iomem);
	g_free(name);
	}
	}

	static void arm_gicv3_common_realize(DeviceState dev, Error *errp)
	{
	GICv3State *s = ARM_GICV3_COMMON(dev);
	int i, rdist_capacity, cpuidx;

	/*
	* This GIC device supports only revisions 3 and 4. The GICv1/v2
	* is a separate device.
	* Note that subclasses of this device may impose further restrictions
	* on the GIC revision: notably, the in-kernel KVM GIC doesn't
	* support GICv4.
	*/
	if (s->revision != 3 && s->revision != 4) {
	error_setg(errp, "unsupported GIC revision %d", s->revision);
	return;
	}

	if (s->num_irq > GICV3_MAXIRQ) {
	error_setg(errp,
	"requested %u interrupt lines exceeds GIC maximum %d",
	s->num_irq, GICV3_MAXIRQ);
	return;
	}
	if (s->num_irq < GIC_INTERNAL) {
	error_setg(errp,
	"requested %u interrupt lines is below GIC minimum %d",
	s->num_irq, GIC_INTERNAL);
	return;
	}
	if (s->num_cpu == 0) {
	error_setg(errp, "num-cpu must be at least 1");
	return;
	}

	/* ITLinesNumber is represented as (N / 32) - 1, so this is an
	* implementation imposed restriction, not an architectural one,
	* so we don't have to deal with bitfields where only some of the
	* bits in a 32-bit word should be valid.
	*/
	if (s->num_irq % 32) {
	error_setg(errp,
	"%d interrupt lines unsupported: not divisible by 32",
	s->num_irq);
	return;
	}

	if (s->lpi_enable && !s->dma) {
	error_setg(errp, "Redist-ITS: Guest 'sysmem' reference link not set");
	return;
	}

	rdist_capacity = 0;
	for (i = 0; i < s->nb_redist_regions; i++) {
	rdist_capacity += s->redist_region_count[i];
	}
	if (rdist_capacity != s->num_cpu) {
	error_setg(errp, "Capacity of the redist regions(%d) "
	"does not match the number of vcpus(%d)",
	rdist_capacity, s->num_cpu);
	return;
	}

	if (s->lpi_enable) {
	address_space_init(&s->dma_as, s->dma,
	"gicv3-its-sysmem");
	}

	s->cpu = g_new0(GICv3CPUState, s->num_cpu);

	for (i = 0; i < s->num_cpu; i++) {
	CPUState *cpu = qemu_get_cpu(i);
	uint64_t cpu_affid;

	s->cpu[i].cpu = cpu;
	s->cpu[i].gic = s;
	/* Store GICv3CPUState in CPUARMState gicv3state pointer */
	gicv3_set_gicv3state(cpu, &s->cpu[i]);

	/* Pre-construct the GICR_TYPER:
	* For our implementation:
	* Top 32 bits are the affinity value of the associated CPU
	* CommonLPIAff == 01 (redistributors with same Aff3 share LPI table)
	* Processor_Number == CPU index starting from 0
	* DPGS == 0 (GICR_CTLR.DPG* not supported)
	* Last == 1 if this is the last redistributor in a series of
	* contiguous redistributor pages
	* DirectLPI == 0 (direct injection of LPIs not supported)
	* VLPIS == 1 if vLPIs supported (GICv4 and up)
	* PLPIS == 1 if LPIs supported
	*/
	cpu_affid = object_property_get_uint(OBJECT(cpu), "mp-affinity", NULL);

	/* The CPU mp-affinity property is in MPIDR register format; squash
	* the affinity bytes into 32 bits as the GICR_TYPER has them.
	*/
	cpu_affid = ((cpu_affid & 0xFF00000000ULL) >> 8) \|
	(cpu_affid & 0xFFFFFF);
	s->cpu[i].gicr_typer = (cpu_affid << 32) \|
	(1 << 24) \|
	(i << 8);

	if (s->lpi_enable) {
	s->cpu[i].gicr_typer \|= GICR_TYPER_PLPIS;
	if (s->revision > 3) {
	s->cpu[i].gicr_typer \|= GICR_TYPER_VLPIS;
	}
	}
	}

	/*
	* Now go through and set GICR_TYPER.Last for the final
	* redistributor in each region.
	*/
	cpuidx = 0;
	for (i = 0; i < s->nb_redist_regions; i++) {
	cpuidx += s->redist_region_count[i];
	s->cpu[cpuidx - 1].gicr_typer \|= GICR_TYPER_LAST;
	}

	s->itslist = g_ptr_array_new();
	}

	static void arm_gicv3_finalize(Object *obj)
	{
	GICv3State *s = ARM_GICV3_COMMON(obj);

	g_free(s->redist_region_count);
	}

	static void arm_gicv3_common_reset_hold(Object *obj)
	{
	GICv3State *s = ARM_GICV3_COMMON(obj);
	int i;

	for (i = 0; i < s->num_cpu; i++) {
	GICv3CPUState *cs = &s->cpu[i];

	cs->level = 0;
	cs->gicr_ctlr = 0;
	if (s->lpi_enable) {
	/* Our implementation supports clearing GICR_CTLR.EnableLPIs */
	cs->gicr_ctlr \|= GICR_CTLR_CES;
	}
	cs->gicr_statusr[GICV3_S] = 0;
	cs->gicr_statusr[GICV3_NS] = 0;
	cs->gicr_waker = GICR_WAKER_ProcessorSleep \| GICR_WAKER_ChildrenAsleep;
	cs->gicr_propbaser = 0;
	cs->gicr_pendbaser = 0;
	cs->gicr_vpropbaser = 0;
	cs->gicr_vpendbaser = 0;
	/* If we're resetting a TZ-aware GIC as if secure firmware
	* had set it up ready to start a kernel in non-secure, we
	* need to set interrupts to group 1 so the kernel can use them.
	* Otherwise they reset to group 0 like the hardware.
	*/
	if (s->irq_reset_nonsecure) {
	cs->gicr_igroupr0 = 0xffffffff;
	} else {
	cs->gicr_igroupr0 = 0;
	}

	cs->gicr_ienabler0 = 0;
	cs->gicr_ipendr0 = 0;
	cs->gicr_iactiver0 = 0;
	cs->edge_trigger = 0xffff;
	cs->gicr_igrpmodr0 = 0;
	cs->gicr_nsacr = 0;
	memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));

	cs->hppi.prio = 0xff;
	cs->hpplpi.prio = 0xff;
	cs->hppvlpi.prio = 0xff;

	/* State in the CPU interface must not be reset here, because it
	* is part of the CPU's reset domain, not the GIC device's.
	*/
	}

	/* For our implementation affinity routing is always enabled */
	if (s->security_extn) {
	s->gicd_ctlr = GICD_CTLR_ARE_S \| GICD_CTLR_ARE_NS;
	} else {
	s->gicd_ctlr = GICD_CTLR_DS \| GICD_CTLR_ARE;
	}

	s->gicd_statusr[GICV3_S] = 0;
	s->gicd_statusr[GICV3_NS] = 0;

	memset(s->group, 0, sizeof(s->group));
	memset(s->grpmod, 0, sizeof(s->grpmod));
	memset(s->enabled, 0, sizeof(s->enabled));
	memset(s->pending, 0, sizeof(s->pending));
	memset(s->active, 0, sizeof(s->active));
	memset(s->level, 0, sizeof(s->level));
	memset(s->edge_trigger, 0, sizeof(s->edge_trigger));
	memset(s->gicd_ipriority, 0, sizeof(s->gicd_ipriority));
	memset(s->gicd_irouter, 0, sizeof(s->gicd_irouter));
	memset(s->gicd_nsacr, 0, sizeof(s->gicd_nsacr));
	/* GICD_IROUTER are UNKNOWN at reset so in theory the guest must
	* write these to get sane behaviour and we need not populate the
	* pointer cache here; however having the cache be different for
	* "happened to be 0 from reset" and "guest wrote 0" would be
	* too confusing.
	*/
	gicv3_cache_all_target_cpustates(s);

	if (s->irq_reset_nonsecure) {
	/* If we're resetting a TZ-aware GIC as if secure firmware
	* had set it up ready to start a kernel in non-secure, we
	* need to set interrupts to group 1 so the kernel can use them.
	* Otherwise they reset to group 0 like the hardware.
	*/
	for (i = GIC_INTERNAL; i < s->num_irq; i++) {
	gicv3_gicd_group_set(s, i);
	}
	}
	s->gicd_no_migration_shift_bug = true;
	}

	static void arm_gic_common_linux_init(ARMLinuxBootIf *obj,
	bool secure_boot)
	{
	GICv3State *s = ARM_GICV3_COMMON(obj);

	if (s->security_extn && !secure_boot) {
	/* We're directly booting a kernel into NonSecure. If this GIC
	* implements the security extensions then we must configure it
	* to have all the interrupts be NonSecure (this is a job that
	* is done by the Secure boot firmware in real hardware, and in
	* this mode QEMU is acting as a minimalist firmware-and-bootloader
	* equivalent).
	*/
	s->irq_reset_nonsecure = true;
	}
	}

	static Property arm_gicv3_common_properties[] = {
	DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1),
	DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
	DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
	DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
	DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
	/*
	* Compatibility property: force 8 bits of physical priority, even
	* if the CPU being emulated should have fewer.
	*/
	DEFINE_PROP_BOOL("force-8-bit-prio", GICv3State, force_8bit_prio, 0),
	DEFINE_PROP_ARRAY("redist-region-count", GICv3State, nb_redist_regions,
	redist_region_count, qdev_prop_uint32, uint32_t),
	DEFINE_PROP_LINK("sysmem", GICv3State, dma, TYPE_MEMORY_REGION,
	MemoryRegion *),
	DEFINE_PROP_END_OF_LIST(),
	};

	static void arm_gicv3_common_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);
	ResettableClass *rc = RESETTABLE_CLASS(klass);
	ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass);

	rc->phases.hold = arm_gicv3_common_reset_hold;
	dc->realize = arm_gicv3_common_realize;
	device_class_set_props(dc, arm_gicv3_common_properties);
	dc->vmsd = &vmstate_gicv3;
	albifc->arm_linux_init = arm_gic_common_linux_init;
	}

	static const TypeInfo arm_gicv3_common_type = {
	.name = TYPE_ARM_GICV3_COMMON,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(GICv3State),
	.class_size = sizeof(ARMGICv3CommonClass),
	.class_init = arm_gicv3_common_class_init,
	.instance_finalize = arm_gicv3_finalize,
	.abstract = true,
	.interfaces = (InterfaceInfo []) {
	{ TYPE_ARM_LINUX_BOOT_IF },
	{ },
	},
	};

	static void register_types(void)
	{
	type_register_static(&arm_gicv3_common_type);
	}

	type_init(register_types)

	const char *gicv3_class_name(void)
	{
	if (kvm_irqchip_in_kernel()) {
	return "kvm-arm-gicv3";
	} else {
	if (kvm_enabled()) {
	error_report("Userspace GICv3 is not supported with KVM");
	exit(1);
	}
	return "arm-gicv3";
	}
	}