| /* |
| * Semihosting support for systems modeled on the Arm "Angel" |
| * semihosting syscalls design. This includes Arm and RISC-V processors |
| * |
| * Copyright (c) 2005, 2007 CodeSourcery. |
| * Copyright (c) 2019 Linaro |
| * Written by Paul Brook. |
| * |
| * Copyright © 2020 by Keith Packard <keithp@keithp.com> |
| * Adapted for systems other than ARM, including RISC-V, by Keith Packard |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * ARM Semihosting is documented in: |
| * Semihosting for AArch32 and AArch64 Release 2.0 |
| * https://static.docs.arm.com/100863/0200/semihosting.pdf |
| * |
| * RISC-V Semihosting is documented in: |
| * RISC-V Semihosting |
| * https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc |
| */ |
| |
| #include "qemu/osdep.h" |
| |
| #include "semihosting/semihost.h" |
| #include "semihosting/console.h" |
| #include "semihosting/common-semi.h" |
| #include "qemu/timer.h" |
| #include "exec/gdbstub.h" |
| #ifdef CONFIG_USER_ONLY |
| #include "qemu.h" |
| |
| #define COMMON_SEMI_HEAP_SIZE (128 * 1024 * 1024) |
| #else |
| #include "qemu/cutils.h" |
| #include "hw/loader.h" |
| #ifdef TARGET_ARM |
| #include "hw/arm/boot.h" |
| #endif |
| #include "hw/boards.h" |
| #endif |
| |
| #define TARGET_SYS_OPEN 0x01 |
| #define TARGET_SYS_CLOSE 0x02 |
| #define TARGET_SYS_WRITEC 0x03 |
| #define TARGET_SYS_WRITE0 0x04 |
| #define TARGET_SYS_WRITE 0x05 |
| #define TARGET_SYS_READ 0x06 |
| #define TARGET_SYS_READC 0x07 |
| #define TARGET_SYS_ISERROR 0x08 |
| #define TARGET_SYS_ISTTY 0x09 |
| #define TARGET_SYS_SEEK 0x0a |
| #define TARGET_SYS_FLEN 0x0c |
| #define TARGET_SYS_TMPNAM 0x0d |
| #define TARGET_SYS_REMOVE 0x0e |
| #define TARGET_SYS_RENAME 0x0f |
| #define TARGET_SYS_CLOCK 0x10 |
| #define TARGET_SYS_TIME 0x11 |
| #define TARGET_SYS_SYSTEM 0x12 |
| #define TARGET_SYS_ERRNO 0x13 |
| #define TARGET_SYS_GET_CMDLINE 0x15 |
| #define TARGET_SYS_HEAPINFO 0x16 |
| #define TARGET_SYS_EXIT 0x18 |
| #define TARGET_SYS_SYNCCACHE 0x19 |
| #define TARGET_SYS_EXIT_EXTENDED 0x20 |
| #define TARGET_SYS_ELAPSED 0x30 |
| #define TARGET_SYS_TICKFREQ 0x31 |
| |
| /* ADP_Stopped_ApplicationExit is used for exit(0), |
| * anything else is implemented as exit(1) */ |
| #define ADP_Stopped_ApplicationExit (0x20026) |
| |
| #ifndef O_BINARY |
| #define O_BINARY 0 |
| #endif |
| |
| #define GDB_O_RDONLY 0x000 |
| #define GDB_O_WRONLY 0x001 |
| #define GDB_O_RDWR 0x002 |
| #define GDB_O_APPEND 0x008 |
| #define GDB_O_CREAT 0x200 |
| #define GDB_O_TRUNC 0x400 |
| #define GDB_O_BINARY 0 |
| |
| static int gdb_open_modeflags[12] = { |
| GDB_O_RDONLY, |
| GDB_O_RDONLY | GDB_O_BINARY, |
| GDB_O_RDWR, |
| GDB_O_RDWR | GDB_O_BINARY, |
| GDB_O_WRONLY | GDB_O_CREAT | GDB_O_TRUNC, |
| GDB_O_WRONLY | GDB_O_CREAT | GDB_O_TRUNC | GDB_O_BINARY, |
| GDB_O_RDWR | GDB_O_CREAT | GDB_O_TRUNC, |
| GDB_O_RDWR | GDB_O_CREAT | GDB_O_TRUNC | GDB_O_BINARY, |
| GDB_O_WRONLY | GDB_O_CREAT | GDB_O_APPEND, |
| GDB_O_WRONLY | GDB_O_CREAT | GDB_O_APPEND | GDB_O_BINARY, |
| GDB_O_RDWR | GDB_O_CREAT | GDB_O_APPEND, |
| GDB_O_RDWR | GDB_O_CREAT | GDB_O_APPEND | GDB_O_BINARY |
| }; |
| |
| static int open_modeflags[12] = { |
| O_RDONLY, |
| O_RDONLY | O_BINARY, |
| O_RDWR, |
| O_RDWR | O_BINARY, |
| O_WRONLY | O_CREAT | O_TRUNC, |
| O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, |
| O_RDWR | O_CREAT | O_TRUNC, |
| O_RDWR | O_CREAT | O_TRUNC | O_BINARY, |
| O_WRONLY | O_CREAT | O_APPEND, |
| O_WRONLY | O_CREAT | O_APPEND | O_BINARY, |
| O_RDWR | O_CREAT | O_APPEND, |
| O_RDWR | O_CREAT | O_APPEND | O_BINARY |
| }; |
| |
| typedef enum GuestFDType { |
| GuestFDUnused = 0, |
| GuestFDHost = 1, |
| GuestFDGDB = 2, |
| GuestFDFeatureFile = 3, |
| } GuestFDType; |
| |
| /* |
| * Guest file descriptors are integer indexes into an array of |
| * these structures (we will dynamically resize as necessary). |
| */ |
| typedef struct GuestFD { |
| GuestFDType type; |
| union { |
| int hostfd; |
| target_ulong featurefile_offset; |
| }; |
| } GuestFD; |
| |
| static GArray *guestfd_array; |
| |
| #ifndef CONFIG_USER_ONLY |
| |
| /** |
| * common_semi_find_bases: find information about ram and heap base |
| * |
| * This function attempts to provide meaningful numbers for RAM and |
| * HEAP base addresses. The rambase is simply the lowest addressable |
| * RAM position. For the heapbase we ask the loader to scan the |
| * address space and the largest available gap by querying the "ROM" |
| * regions. |
| * |
| * Returns: a structure with the numbers we need. |
| */ |
| |
| typedef struct LayoutInfo { |
| target_ulong rambase; |
| size_t ramsize; |
| hwaddr heapbase; |
| hwaddr heaplimit; |
| } LayoutInfo; |
| |
| static bool find_ram_cb(Int128 start, Int128 len, const MemoryRegion *mr, |
| hwaddr offset_in_region, void *opaque) |
| { |
| LayoutInfo *info = (LayoutInfo *) opaque; |
| uint64_t size = int128_get64(len); |
| |
| if (!mr->ram || mr->readonly) { |
| return false; |
| } |
| |
| if (size > info->ramsize) { |
| info->rambase = int128_get64(start); |
| info->ramsize = size; |
| } |
| |
| /* search exhaustively for largest RAM */ |
| return false; |
| } |
| |
| static LayoutInfo common_semi_find_bases(CPUState *cs) |
| { |
| FlatView *fv; |
| LayoutInfo info = { 0, 0, 0, 0 }; |
| |
| RCU_READ_LOCK_GUARD(); |
| |
| fv = address_space_to_flatview(cs->as); |
| flatview_for_each_range(fv, find_ram_cb, &info); |
| |
| /* |
| * If we have found the RAM lets iterate through the ROM blobs to |
| * work out the best place for the remainder of RAM and split it |
| * equally between stack and heap. |
| */ |
| if (info.rambase || info.ramsize > 0) { |
| RomGap gap = rom_find_largest_gap_between(info.rambase, info.ramsize); |
| info.heapbase = gap.base; |
| info.heaplimit = gap.base + gap.size; |
| } |
| |
| return info; |
| } |
| |
| #endif |
| |
| #ifdef TARGET_ARM |
| static inline target_ulong |
| common_semi_arg(CPUState *cs, int argno) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| if (is_a64(env)) { |
| return env->xregs[argno]; |
| } else { |
| return env->regs[argno]; |
| } |
| } |
| |
| static inline void |
| common_semi_set_ret(CPUState *cs, target_ulong ret) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| if (is_a64(env)) { |
| env->xregs[0] = ret; |
| } else { |
| env->regs[0] = ret; |
| } |
| } |
| |
| static inline bool |
| common_semi_sys_exit_extended(CPUState *cs, int nr) |
| { |
| return (nr == TARGET_SYS_EXIT_EXTENDED || is_a64(cs->env_ptr)); |
| } |
| |
| #endif /* TARGET_ARM */ |
| |
| #ifdef TARGET_RISCV |
| static inline target_ulong |
| common_semi_arg(CPUState *cs, int argno) |
| { |
| RISCVCPU *cpu = RISCV_CPU(cs); |
| CPURISCVState *env = &cpu->env; |
| return env->gpr[xA0 + argno]; |
| } |
| |
| static inline void |
| common_semi_set_ret(CPUState *cs, target_ulong ret) |
| { |
| RISCVCPU *cpu = RISCV_CPU(cs); |
| CPURISCVState *env = &cpu->env; |
| env->gpr[xA0] = ret; |
| } |
| |
| static inline bool |
| common_semi_sys_exit_extended(CPUState *cs, int nr) |
| { |
| return (nr == TARGET_SYS_EXIT_EXTENDED || sizeof(target_ulong) == 8); |
| } |
| |
| #endif |
| |
| /* |
| * Allocate a new guest file descriptor and return it; if we |
| * couldn't allocate a new fd then return -1. |
| * This is a fairly simplistic implementation because we don't |
| * expect that most semihosting guest programs will make very |
| * heavy use of opening and closing fds. |
| */ |
| static int alloc_guestfd(void) |
| { |
| guint i; |
| |
| if (!guestfd_array) { |
| /* New entries zero-initialized, i.e. type GuestFDUnused */ |
| guestfd_array = g_array_new(FALSE, TRUE, sizeof(GuestFD)); |
| } |
| |
| /* SYS_OPEN should return nonzero handle on success. Start guestfd from 1 */ |
| for (i = 1; i < guestfd_array->len; i++) { |
| GuestFD *gf = &g_array_index(guestfd_array, GuestFD, i); |
| |
| if (gf->type == GuestFDUnused) { |
| return i; |
| } |
| } |
| |
| /* All elements already in use: expand the array */ |
| g_array_set_size(guestfd_array, i + 1); |
| return i; |
| } |
| |
| /* |
| * Look up the guestfd in the data structure; return NULL |
| * for out of bounds, but don't check whether the slot is unused. |
| * This is used internally by the other guestfd functions. |
| */ |
| static GuestFD *do_get_guestfd(int guestfd) |
| { |
| if (!guestfd_array) { |
| return NULL; |
| } |
| |
| if (guestfd <= 0 || guestfd >= guestfd_array->len) { |
| return NULL; |
| } |
| |
| return &g_array_index(guestfd_array, GuestFD, guestfd); |
| } |
| |
| /* |
| * Associate the specified guest fd (which must have been |
| * allocated via alloc_fd() and not previously used) with |
| * the specified host/gdb fd. |
| */ |
| static void associate_guestfd(int guestfd, int hostfd) |
| { |
| GuestFD *gf = do_get_guestfd(guestfd); |
| |
| assert(gf); |
| gf->type = use_gdb_syscalls() ? GuestFDGDB : GuestFDHost; |
| gf->hostfd = hostfd; |
| } |
| |
| /* |
| * Deallocate the specified guest file descriptor. This doesn't |
| * close the host fd, it merely undoes the work of alloc_fd(). |
| */ |
| static void dealloc_guestfd(int guestfd) |
| { |
| GuestFD *gf = do_get_guestfd(guestfd); |
| |
| assert(gf); |
| gf->type = GuestFDUnused; |
| } |
| |
| /* |
| * Given a guest file descriptor, get the associated struct. |
| * If the fd is not valid, return NULL. This is the function |
| * used by the various semihosting calls to validate a handle |
| * from the guest. |
| * Note: calling alloc_guestfd() or dealloc_guestfd() will |
| * invalidate any GuestFD* obtained by calling this function. |
| */ |
| static GuestFD *get_guestfd(int guestfd) |
| { |
| GuestFD *gf = do_get_guestfd(guestfd); |
| |
| if (!gf || gf->type == GuestFDUnused) { |
| return NULL; |
| } |
| return gf; |
| } |
| |
| /* |
| * The semihosting API has no concept of its errno being thread-safe, |
| * as the API design predates SMP CPUs and was intended as a simple |
| * real-hardware set of debug functionality. For QEMU, we make the |
| * errno be per-thread in linux-user mode; in softmmu it is a simple |
| * global, and we assume that the guest takes care of avoiding any races. |
| */ |
| #ifndef CONFIG_USER_ONLY |
| static target_ulong syscall_err; |
| |
| #include "exec/softmmu-semi.h" |
| #endif |
| |
| static inline uint32_t set_swi_errno(CPUState *cs, uint32_t code) |
| { |
| if (code == (uint32_t)-1) { |
| #ifdef CONFIG_USER_ONLY |
| TaskState *ts = cs->opaque; |
| |
| ts->swi_errno = errno; |
| #else |
| syscall_err = errno; |
| #endif |
| } |
| return code; |
| } |
| |
| static inline uint32_t get_swi_errno(CPUState *cs) |
| { |
| #ifdef CONFIG_USER_ONLY |
| TaskState *ts = cs->opaque; |
| |
| return ts->swi_errno; |
| #else |
| return syscall_err; |
| #endif |
| } |
| |
| static target_ulong common_semi_syscall_len; |
| |
| static void common_semi_cb(CPUState *cs, target_ulong ret, target_ulong err) |
| { |
| target_ulong reg0 = common_semi_arg(cs, 0); |
| |
| if (ret == (target_ulong)-1) { |
| errno = err; |
| set_swi_errno(cs, -1); |
| reg0 = ret; |
| } else { |
| /* Fixup syscalls that use nonstardard return conventions. */ |
| switch (reg0) { |
| case TARGET_SYS_WRITE: |
| case TARGET_SYS_READ: |
| reg0 = common_semi_syscall_len - ret; |
| break; |
| case TARGET_SYS_SEEK: |
| reg0 = 0; |
| break; |
| default: |
| reg0 = ret; |
| break; |
| } |
| } |
| common_semi_set_ret(cs, reg0); |
| } |
| |
| static target_ulong common_semi_flen_buf(CPUState *cs) |
| { |
| target_ulong sp; |
| #ifdef TARGET_ARM |
| /* Return an address in target memory of 64 bytes where the remote |
| * gdb should write its stat struct. (The format of this structure |
| * is defined by GDB's remote protocol and is not target-specific.) |
| * We put this on the guest's stack just below SP. |
| */ |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| if (is_a64(env)) { |
| sp = env->xregs[31]; |
| } else { |
| sp = env->regs[13]; |
| } |
| #endif |
| #ifdef TARGET_RISCV |
| RISCVCPU *cpu = RISCV_CPU(cs); |
| CPURISCVState *env = &cpu->env; |
| |
| sp = env->gpr[xSP]; |
| #endif |
| |
| return sp - 64; |
| } |
| |
| static void |
| common_semi_flen_cb(CPUState *cs, target_ulong ret, target_ulong err) |
| { |
| /* The size is always stored in big-endian order, extract |
| the value. We assume the size always fit in 32 bits. */ |
| uint32_t size; |
| cpu_memory_rw_debug(cs, common_semi_flen_buf(cs) + 32, |
| (uint8_t *)&size, 4, 0); |
| size = be32_to_cpu(size); |
| common_semi_set_ret(cs, size); |
| errno = err; |
| set_swi_errno(cs, -1); |
| } |
| |
| static int common_semi_open_guestfd; |
| |
| static void |
| common_semi_open_cb(CPUState *cs, target_ulong ret, target_ulong err) |
| { |
| if (ret == (target_ulong)-1) { |
| errno = err; |
| set_swi_errno(cs, -1); |
| dealloc_guestfd(common_semi_open_guestfd); |
| } else { |
| associate_guestfd(common_semi_open_guestfd, ret); |
| ret = common_semi_open_guestfd; |
| } |
| common_semi_set_ret(cs, ret); |
| } |
| |
| static target_ulong |
| common_semi_gdb_syscall(CPUState *cs, gdb_syscall_complete_cb cb, |
| const char *fmt, ...) |
| { |
| va_list va; |
| |
| va_start(va, fmt); |
| gdb_do_syscallv(cb, fmt, va); |
| va_end(va); |
| |
| /* |
| * FIXME: in softmmu mode, the gdbstub will schedule our callback |
| * to occur, but will not actually call it to complete the syscall |
| * until after this function has returned and we are back in the |
| * CPU main loop. Therefore callers to this function must not |
| * do anything with its return value, because it is not necessarily |
| * the result of the syscall, but could just be the old value of X0. |
| * The only thing safe to do with this is that the callers of |
| * do_common_semihosting() will write it straight back into X0. |
| * (In linux-user mode, the callback will have happened before |
| * gdb_do_syscallv() returns.) |
| * |
| * We should tidy this up so neither this function nor |
| * do_common_semihosting() return a value, so the mistake of |
| * doing something with the return value is not possible to make. |
| */ |
| |
| return common_semi_arg(cs, 0); |
| } |
| |
| /* |
| * Types for functions implementing various semihosting calls |
| * for specific types of guest file descriptor. These must all |
| * do the work and return the required return value for the guest, |
| * setting the guest errno if appropriate. |
| */ |
| typedef uint32_t sys_closefn(CPUState *cs, GuestFD *gf); |
| typedef uint32_t sys_writefn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len); |
| typedef uint32_t sys_readfn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len); |
| typedef uint32_t sys_isattyfn(CPUState *cs, GuestFD *gf); |
| typedef uint32_t sys_seekfn(CPUState *cs, GuestFD *gf, |
| target_ulong offset); |
| typedef uint32_t sys_flenfn(CPUState *cs, GuestFD *gf); |
| |
| static uint32_t host_closefn(CPUState *cs, GuestFD *gf) |
| { |
| /* |
| * Only close the underlying host fd if it's one we opened on behalf |
| * of the guest in SYS_OPEN. |
| */ |
| if (gf->hostfd == STDIN_FILENO || |
| gf->hostfd == STDOUT_FILENO || |
| gf->hostfd == STDERR_FILENO) { |
| return 0; |
| } |
| return set_swi_errno(cs, close(gf->hostfd)); |
| } |
| |
| static uint32_t host_writefn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len) |
| { |
| CPUArchState *env = cs->env_ptr; |
| uint32_t ret; |
| char *s = lock_user(VERIFY_READ, buf, len, 1); |
| (void) env; /* Used in arm softmmu lock_user implicitly */ |
| if (!s) { |
| /* Return bytes not written on error */ |
| return len; |
| } |
| ret = set_swi_errno(cs, write(gf->hostfd, s, len)); |
| unlock_user(s, buf, 0); |
| if (ret == (uint32_t)-1) { |
| ret = 0; |
| } |
| /* Return bytes not written */ |
| return len - ret; |
| } |
| |
| static uint32_t host_readfn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len) |
| { |
| CPUArchState *env = cs->env_ptr; |
| uint32_t ret; |
| char *s = lock_user(VERIFY_WRITE, buf, len, 0); |
| (void) env; /* Used in arm softmmu lock_user implicitly */ |
| if (!s) { |
| /* return bytes not read */ |
| return len; |
| } |
| do { |
| ret = set_swi_errno(cs, read(gf->hostfd, s, len)); |
| } while (ret == -1 && errno == EINTR); |
| unlock_user(s, buf, len); |
| if (ret == (uint32_t)-1) { |
| ret = 0; |
| } |
| /* Return bytes not read */ |
| return len - ret; |
| } |
| |
| static uint32_t host_isattyfn(CPUState *cs, GuestFD *gf) |
| { |
| return isatty(gf->hostfd); |
| } |
| |
| static uint32_t host_seekfn(CPUState *cs, GuestFD *gf, target_ulong offset) |
| { |
| uint32_t ret = set_swi_errno(cs, lseek(gf->hostfd, offset, SEEK_SET)); |
| if (ret == (uint32_t)-1) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| static uint32_t host_flenfn(CPUState *cs, GuestFD *gf) |
| { |
| struct stat buf; |
| uint32_t ret = set_swi_errno(cs, fstat(gf->hostfd, &buf)); |
| if (ret == (uint32_t)-1) { |
| return -1; |
| } |
| return buf.st_size; |
| } |
| |
| static uint32_t gdb_closefn(CPUState *cs, GuestFD *gf) |
| { |
| return common_semi_gdb_syscall(cs, common_semi_cb, "close,%x", gf->hostfd); |
| } |
| |
| static uint32_t gdb_writefn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len) |
| { |
| common_semi_syscall_len = len; |
| return common_semi_gdb_syscall(cs, common_semi_cb, "write,%x,%x,%x", |
| gf->hostfd, buf, len); |
| } |
| |
| static uint32_t gdb_readfn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len) |
| { |
| common_semi_syscall_len = len; |
| return common_semi_gdb_syscall(cs, common_semi_cb, "read,%x,%x,%x", |
| gf->hostfd, buf, len); |
| } |
| |
| static uint32_t gdb_isattyfn(CPUState *cs, GuestFD *gf) |
| { |
| return common_semi_gdb_syscall(cs, common_semi_cb, "isatty,%x", gf->hostfd); |
| } |
| |
| static uint32_t gdb_seekfn(CPUState *cs, GuestFD *gf, target_ulong offset) |
| { |
| return common_semi_gdb_syscall(cs, common_semi_cb, "lseek,%x,%x,0", |
| gf->hostfd, offset); |
| } |
| |
| static uint32_t gdb_flenfn(CPUState *cs, GuestFD *gf) |
| { |
| return common_semi_gdb_syscall(cs, common_semi_flen_cb, "fstat,%x,%x", |
| gf->hostfd, common_semi_flen_buf(cs)); |
| } |
| |
| #define SHFB_MAGIC_0 0x53 |
| #define SHFB_MAGIC_1 0x48 |
| #define SHFB_MAGIC_2 0x46 |
| #define SHFB_MAGIC_3 0x42 |
| |
| /* Feature bits reportable in feature byte 0 */ |
| #define SH_EXT_EXIT_EXTENDED (1 << 0) |
| #define SH_EXT_STDOUT_STDERR (1 << 1) |
| |
| static const uint8_t featurefile_data[] = { |
| SHFB_MAGIC_0, |
| SHFB_MAGIC_1, |
| SHFB_MAGIC_2, |
| SHFB_MAGIC_3, |
| SH_EXT_EXIT_EXTENDED | SH_EXT_STDOUT_STDERR, /* Feature byte 0 */ |
| }; |
| |
| static void init_featurefile_guestfd(int guestfd) |
| { |
| GuestFD *gf = do_get_guestfd(guestfd); |
| |
| assert(gf); |
| gf->type = GuestFDFeatureFile; |
| gf->featurefile_offset = 0; |
| } |
| |
| static uint32_t featurefile_closefn(CPUState *cs, GuestFD *gf) |
| { |
| /* Nothing to do */ |
| return 0; |
| } |
| |
| static uint32_t featurefile_writefn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len) |
| { |
| /* This fd can never be open for writing */ |
| |
| errno = EBADF; |
| return set_swi_errno(cs, -1); |
| } |
| |
| static uint32_t featurefile_readfn(CPUState *cs, GuestFD *gf, |
| target_ulong buf, uint32_t len) |
| { |
| CPUArchState *env = cs->env_ptr; |
| uint32_t i; |
| char *s; |
| |
| (void) env; /* Used in arm softmmu lock_user implicitly */ |
| s = lock_user(VERIFY_WRITE, buf, len, 0); |
| if (!s) { |
| return len; |
| } |
| |
| for (i = 0; i < len; i++) { |
| if (gf->featurefile_offset >= sizeof(featurefile_data)) { |
| break; |
| } |
| s[i] = featurefile_data[gf->featurefile_offset]; |
| gf->featurefile_offset++; |
| } |
| |
| unlock_user(s, buf, len); |
| |
| /* Return number of bytes not read */ |
| return len - i; |
| } |
| |
| static uint32_t featurefile_isattyfn(CPUState *cs, GuestFD *gf) |
| { |
| return 0; |
| } |
| |
| static uint32_t featurefile_seekfn(CPUState *cs, GuestFD *gf, |
| target_ulong offset) |
| { |
| gf->featurefile_offset = offset; |
| return 0; |
| } |
| |
| static uint32_t featurefile_flenfn(CPUState *cs, GuestFD *gf) |
| { |
| return sizeof(featurefile_data); |
| } |
| |
| typedef struct GuestFDFunctions { |
| sys_closefn *closefn; |
| sys_writefn *writefn; |
| sys_readfn *readfn; |
| sys_isattyfn *isattyfn; |
| sys_seekfn *seekfn; |
| sys_flenfn *flenfn; |
| } GuestFDFunctions; |
| |
| static const GuestFDFunctions guestfd_fns[] = { |
| [GuestFDHost] = { |
| .closefn = host_closefn, |
| .writefn = host_writefn, |
| .readfn = host_readfn, |
| .isattyfn = host_isattyfn, |
| .seekfn = host_seekfn, |
| .flenfn = host_flenfn, |
| }, |
| [GuestFDGDB] = { |
| .closefn = gdb_closefn, |
| .writefn = gdb_writefn, |
| .readfn = gdb_readfn, |
| .isattyfn = gdb_isattyfn, |
| .seekfn = gdb_seekfn, |
| .flenfn = gdb_flenfn, |
| }, |
| [GuestFDFeatureFile] = { |
| .closefn = featurefile_closefn, |
| .writefn = featurefile_writefn, |
| .readfn = featurefile_readfn, |
| .isattyfn = featurefile_isattyfn, |
| .seekfn = featurefile_seekfn, |
| .flenfn = featurefile_flenfn, |
| }, |
| }; |
| |
| /* |
| * Read the input value from the argument block; fail the semihosting |
| * call if the memory read fails. Eventually we could use a generic |
| * CPUState helper function here. |
| */ |
| static inline bool is_64bit_semihosting(CPUArchState *env) |
| { |
| #if defined(TARGET_ARM) |
| return is_a64(env); |
| #elif defined(TARGET_RISCV) |
| return riscv_cpu_mxl(env) != MXL_RV32; |
| #else |
| #error un-handled architecture |
| #endif |
| } |
| |
| |
| #define GET_ARG(n) do { \ |
| if (is_64bit_semihosting(env)) { \ |
| if (get_user_u64(arg ## n, args + (n) * 8)) { \ |
| errno = EFAULT; \ |
| return set_swi_errno(cs, -1); \ |
| } \ |
| } else { \ |
| if (get_user_u32(arg ## n, args + (n) * 4)) { \ |
| errno = EFAULT; \ |
| return set_swi_errno(cs, -1); \ |
| } \ |
| } \ |
| } while (0) |
| |
| #define SET_ARG(n, val) \ |
| (is_64bit_semihosting(env) ? \ |
| put_user_u64(val, args + (n) * 8) : \ |
| put_user_u32(val, args + (n) * 4)) |
| |
| |
| /* |
| * Do a semihosting call. |
| * |
| * The specification always says that the "return register" either |
| * returns a specific value or is corrupted, so we don't need to |
| * report to our caller whether we are returning a value or trying to |
| * leave the register unchanged. We use 0xdeadbeef as the return value |
| * when there isn't a defined return value for the call. |
| */ |
| target_ulong do_common_semihosting(CPUState *cs) |
| { |
| CPUArchState *env = cs->env_ptr; |
| target_ulong args; |
| target_ulong arg0, arg1, arg2, arg3; |
| target_ulong ul_ret; |
| char * s; |
| int nr; |
| uint32_t ret; |
| uint32_t len; |
| GuestFD *gf; |
| int64_t elapsed; |
| |
| (void) env; /* Used implicitly by arm lock_user macro */ |
| nr = common_semi_arg(cs, 0) & 0xffffffffU; |
| args = common_semi_arg(cs, 1); |
| |
| switch (nr) { |
| case TARGET_SYS_OPEN: |
| { |
| int guestfd; |
| |
| GET_ARG(0); |
| GET_ARG(1); |
| GET_ARG(2); |
| s = lock_user_string(arg0); |
| if (!s) { |
| errno = EFAULT; |
| return set_swi_errno(cs, -1); |
| } |
| if (arg1 >= 12) { |
| unlock_user(s, arg0, 0); |
| errno = EINVAL; |
| return set_swi_errno(cs, -1); |
| } |
| |
| guestfd = alloc_guestfd(); |
| if (guestfd < 0) { |
| unlock_user(s, arg0, 0); |
| errno = EMFILE; |
| return set_swi_errno(cs, -1); |
| } |
| |
| if (strcmp(s, ":tt") == 0) { |
| int result_fileno; |
| |
| /* |
| * We implement SH_EXT_STDOUT_STDERR, so: |
| * open for read == stdin |
| * open for write == stdout |
| * open for append == stderr |
| */ |
| if (arg1 < 4) { |
| result_fileno = STDIN_FILENO; |
| } else if (arg1 < 8) { |
| result_fileno = STDOUT_FILENO; |
| } else { |
| result_fileno = STDERR_FILENO; |
| } |
| associate_guestfd(guestfd, result_fileno); |
| unlock_user(s, arg0, 0); |
| return guestfd; |
| } |
| if (strcmp(s, ":semihosting-features") == 0) { |
| unlock_user(s, arg0, 0); |
| /* We must fail opens for modes other than 0 ('r') or 1 ('rb') */ |
| if (arg1 != 0 && arg1 != 1) { |
| dealloc_guestfd(guestfd); |
| errno = EACCES; |
| return set_swi_errno(cs, -1); |
| } |
| init_featurefile_guestfd(guestfd); |
| return guestfd; |
| } |
| |
| if (use_gdb_syscalls()) { |
| common_semi_open_guestfd = guestfd; |
| ret = common_semi_gdb_syscall(cs, common_semi_open_cb, |
| "open,%s,%x,1a4", arg0, (int)arg2 + 1, |
| gdb_open_modeflags[arg1]); |
| } else { |
| ret = set_swi_errno(cs, open(s, open_modeflags[arg1], 0644)); |
| if (ret == (uint32_t)-1) { |
| dealloc_guestfd(guestfd); |
| } else { |
| associate_guestfd(guestfd, ret); |
| ret = guestfd; |
| } |
| } |
| unlock_user(s, arg0, 0); |
| return ret; |
| } |
| case TARGET_SYS_CLOSE: |
| GET_ARG(0); |
| |
| gf = get_guestfd(arg0); |
| if (!gf) { |
| errno = EBADF; |
| return set_swi_errno(cs, -1); |
| } |
| |
| ret = guestfd_fns[gf->type].closefn(cs, gf); |
| dealloc_guestfd(arg0); |
| return ret; |
| case TARGET_SYS_WRITEC: |
| qemu_semihosting_console_outc(cs->env_ptr, args); |
| return 0xdeadbeef; |
| case TARGET_SYS_WRITE0: |
| return qemu_semihosting_console_outs(cs->env_ptr, args); |
| case TARGET_SYS_WRITE: |
| GET_ARG(0); |
| GET_ARG(1); |
| GET_ARG(2); |
| len = arg2; |
| |
| gf = get_guestfd(arg0); |
| if (!gf) { |
| errno = EBADF; |
| return set_swi_errno(cs, -1); |
| } |
| |
| return guestfd_fns[gf->type].writefn(cs, gf, arg1, len); |
| case TARGET_SYS_READ: |
| GET_ARG(0); |
| GET_ARG(1); |
| GET_ARG(2); |
| len = arg2; |
| |
| gf = get_guestfd(arg0); |
| if (!gf) { |
| errno = EBADF; |
| return set_swi_errno(cs, -1); |
| } |
| |
| return guestfd_fns[gf->type].readfn(cs, gf, arg1, len); |
| case TARGET_SYS_READC: |
| return qemu_semihosting_console_inc(cs->env_ptr); |
| case TARGET_SYS_ISERROR: |
| GET_ARG(0); |
| return (target_long) arg0 < 0 ? 1 : 0; |
| case TARGET_SYS_ISTTY: |
| GET_ARG(0); |
| |
| gf = get_guestfd(arg0); |
| if (!gf) { |
| errno = EBADF; |
| return set_swi_errno(cs, -1); |
| } |
| |
| return guestfd_fns[gf->type].isattyfn(cs, gf); |
| case TARGET_SYS_SEEK: |
| GET_ARG(0); |
| GET_ARG(1); |
| |
| gf = get_guestfd(arg0); |
| if (!gf) { |
| errno = EBADF; |
| return set_swi_errno(cs, -1); |
| } |
| |
| return guestfd_fns[gf->type].seekfn(cs, gf, arg1); |
| case TARGET_SYS_FLEN: |
| GET_ARG(0); |
| |
| gf = get_guestfd(arg0); |
| if (!gf) { |
| errno = EBADF; |
| return set_swi_errno(cs, -1); |
| } |
| |
| return guestfd_fns[gf->type].flenfn(cs, gf); |
| case TARGET_SYS_TMPNAM: |
| GET_ARG(0); |
| GET_ARG(1); |
| GET_ARG(2); |
| if (asprintf(&s, "/tmp/qemu-%x%02x", getpid(), |
| (int) (arg1 & 0xff)) < 0) { |
| return -1; |
| } |
| ul_ret = (target_ulong) -1; |
| |
| /* Make sure there's enough space in the buffer */ |
| if (strlen(s) < arg2) { |
| char *output = lock_user(VERIFY_WRITE, arg0, arg2, 0); |
| strcpy(output, s); |
| unlock_user(output, arg0, arg2); |
| ul_ret = 0; |
| } |
| free(s); |
| return ul_ret; |
| case TARGET_SYS_REMOVE: |
| GET_ARG(0); |
| GET_ARG(1); |
| if (use_gdb_syscalls()) { |
| ret = common_semi_gdb_syscall(cs, common_semi_cb, "unlink,%s", |
| arg0, (int)arg1 + 1); |
| } else { |
| s = lock_user_string(arg0); |
| if (!s) { |
| errno = EFAULT; |
| return set_swi_errno(cs, -1); |
| } |
| ret = set_swi_errno(cs, remove(s)); |
| unlock_user(s, arg0, 0); |
| } |
| return ret; |
| case TARGET_SYS_RENAME: |
| GET_ARG(0); |
| GET_ARG(1); |
| GET_ARG(2); |
| GET_ARG(3); |
| if (use_gdb_syscalls()) { |
| return common_semi_gdb_syscall(cs, common_semi_cb, "rename,%s,%s", |
| arg0, (int)arg1 + 1, arg2, |
| (int)arg3 + 1); |
| } else { |
| char *s2; |
| s = lock_user_string(arg0); |
| s2 = lock_user_string(arg2); |
| if (!s || !s2) { |
| errno = EFAULT; |
| ret = set_swi_errno(cs, -1); |
| } else { |
| ret = set_swi_errno(cs, rename(s, s2)); |
| } |
| if (s2) |
| unlock_user(s2, arg2, 0); |
| if (s) |
| unlock_user(s, arg0, 0); |
| return ret; |
| } |
| case TARGET_SYS_CLOCK: |
| return clock() / (CLOCKS_PER_SEC / 100); |
| case TARGET_SYS_TIME: |
| return set_swi_errno(cs, time(NULL)); |
| case TARGET_SYS_SYSTEM: |
| GET_ARG(0); |
| GET_ARG(1); |
| if (use_gdb_syscalls()) { |
| return common_semi_gdb_syscall(cs, common_semi_cb, "system,%s", |
| arg0, (int)arg1 + 1); |
| } else { |
| s = lock_user_string(arg0); |
| if (!s) { |
| errno = EFAULT; |
| return set_swi_errno(cs, -1); |
| } |
| ret = set_swi_errno(cs, system(s)); |
| unlock_user(s, arg0, 0); |
| return ret; |
| } |
| case TARGET_SYS_ERRNO: |
| return get_swi_errno(cs); |
| case TARGET_SYS_GET_CMDLINE: |
| { |
| /* Build a command-line from the original argv. |
| * |
| * The inputs are: |
| * * arg0, pointer to a buffer of at least the size |
| * specified in arg1. |
| * * arg1, size of the buffer pointed to by arg0 in |
| * bytes. |
| * |
| * The outputs are: |
| * * arg0, pointer to null-terminated string of the |
| * command line. |
| * * arg1, length of the string pointed to by arg0. |
| */ |
| |
| char *output_buffer; |
| size_t input_size; |
| size_t output_size; |
| int status = 0; |
| #if !defined(CONFIG_USER_ONLY) |
| const char *cmdline; |
| #else |
| TaskState *ts = cs->opaque; |
| #endif |
| GET_ARG(0); |
| GET_ARG(1); |
| input_size = arg1; |
| /* Compute the size of the output string. */ |
| #if !defined(CONFIG_USER_ONLY) |
| cmdline = semihosting_get_cmdline(); |
| if (cmdline == NULL) { |
| cmdline = ""; /* Default to an empty line. */ |
| } |
| output_size = strlen(cmdline) + 1; /* Count terminating 0. */ |
| #else |
| unsigned int i; |
| |
| output_size = ts->info->env_strings - ts->info->arg_strings; |
| if (!output_size) { |
| /* |
| * We special-case the "empty command line" case (argc==0). |
| * Just provide the terminating 0. |
| */ |
| output_size = 1; |
| } |
| #endif |
| |
| if (output_size > input_size) { |
| /* Not enough space to store command-line arguments. */ |
| errno = E2BIG; |
| return set_swi_errno(cs, -1); |
| } |
| |
| /* Adjust the command-line length. */ |
| if (SET_ARG(1, output_size - 1)) { |
| /* Couldn't write back to argument block */ |
| errno = EFAULT; |
| return set_swi_errno(cs, -1); |
| } |
| |
| /* Lock the buffer on the ARM side. */ |
| output_buffer = lock_user(VERIFY_WRITE, arg0, output_size, 0); |
| if (!output_buffer) { |
| errno = EFAULT; |
| return set_swi_errno(cs, -1); |
| } |
| |
| /* Copy the command-line arguments. */ |
| #if !defined(CONFIG_USER_ONLY) |
| pstrcpy(output_buffer, output_size, cmdline); |
| #else |
| if (output_size == 1) { |
| /* Empty command-line. */ |
| output_buffer[0] = '\0'; |
| goto out; |
| } |
| |
| if (copy_from_user(output_buffer, ts->info->arg_strings, |
| output_size)) { |
| errno = EFAULT; |
| status = set_swi_errno(cs, -1); |
| goto out; |
| } |
| |
| /* Separate arguments by white spaces. */ |
| for (i = 0; i < output_size - 1; i++) { |
| if (output_buffer[i] == 0) { |
| output_buffer[i] = ' '; |
| } |
| } |
| out: |
| #endif |
| /* Unlock the buffer on the ARM side. */ |
| unlock_user(output_buffer, arg0, output_size); |
| |
| return status; |
| } |
| case TARGET_SYS_HEAPINFO: |
| { |
| target_ulong retvals[4]; |
| int i; |
| #ifdef CONFIG_USER_ONLY |
| TaskState *ts = cs->opaque; |
| target_ulong limit; |
| #else |
| LayoutInfo info = common_semi_find_bases(cs); |
| #endif |
| |
| GET_ARG(0); |
| |
| #ifdef CONFIG_USER_ONLY |
| /* |
| * Some C libraries assume the heap immediately follows .bss, so |
| * allocate it using sbrk. |
| */ |
| if (!ts->heap_limit) { |
| abi_ulong ret; |
| |
| ts->heap_base = do_brk(0); |
| limit = ts->heap_base + COMMON_SEMI_HEAP_SIZE; |
| /* Try a big heap, and reduce the size if that fails. */ |
| for (;;) { |
| ret = do_brk(limit); |
| if (ret >= limit) { |
| break; |
| } |
| limit = (ts->heap_base >> 1) + (limit >> 1); |
| } |
| ts->heap_limit = limit; |
| } |
| |
| retvals[0] = ts->heap_base; |
| retvals[1] = ts->heap_limit; |
| retvals[2] = ts->stack_base; |
| retvals[3] = 0; /* Stack limit. */ |
| #else |
| retvals[0] = info.heapbase; /* Heap Base */ |
| retvals[1] = info.heaplimit; /* Heap Limit */ |
| retvals[2] = info.heaplimit; /* Stack base */ |
| retvals[3] = info.heapbase; /* Stack limit. */ |
| #endif |
| |
| for (i = 0; i < ARRAY_SIZE(retvals); i++) { |
| bool fail; |
| |
| if (is_64bit_semihosting(env)) { |
| fail = put_user_u64(retvals[i], arg0 + i * 8); |
| } else { |
| fail = put_user_u32(retvals[i], arg0 + i * 4); |
| } |
| |
| if (fail) { |
| /* Couldn't write back to argument block */ |
| errno = EFAULT; |
| return set_swi_errno(cs, -1); |
| } |
| } |
| return 0; |
| } |
| case TARGET_SYS_EXIT: |
| case TARGET_SYS_EXIT_EXTENDED: |
| if (common_semi_sys_exit_extended(cs, nr)) { |
| /* |
| * The A64 version of SYS_EXIT takes a parameter block, |
| * so the application-exit type can return a subcode which |
| * is the exit status code from the application. |
| * SYS_EXIT_EXTENDED is an a new-in-v2.0 optional function |
| * which allows A32/T32 guests to also provide a status code. |
| */ |
| GET_ARG(0); |
| GET_ARG(1); |
| |
| if (arg0 == ADP_Stopped_ApplicationExit) { |
| ret = arg1; |
| } else { |
| ret = 1; |
| } |
| } else { |
| /* |
| * The A32/T32 version of SYS_EXIT specifies only |
| * Stopped_ApplicationExit as normal exit, but does not |
| * allow the guest to specify the exit status code. |
| * Everything else is considered an error. |
| */ |
| ret = (args == ADP_Stopped_ApplicationExit) ? 0 : 1; |
| } |
| gdb_exit(ret); |
| exit(ret); |
| case TARGET_SYS_ELAPSED: |
| elapsed = get_clock() - clock_start; |
| if (sizeof(target_ulong) == 8) { |
| SET_ARG(0, elapsed); |
| } else { |
| SET_ARG(0, (uint32_t) elapsed); |
| SET_ARG(1, (uint32_t) (elapsed >> 32)); |
| } |
| return 0; |
| case TARGET_SYS_TICKFREQ: |
| /* qemu always uses nsec */ |
| return 1000000000; |
| case TARGET_SYS_SYNCCACHE: |
| /* |
| * Clean the D-cache and invalidate the I-cache for the specified |
| * virtual address range. This is a nop for us since we don't |
| * implement caches. This is only present on A64. |
| */ |
| #ifdef TARGET_ARM |
| if (is_a64(cs->env_ptr)) { |
| return 0; |
| } |
| #endif |
| #ifdef TARGET_RISCV |
| return 0; |
| #endif |
| /* fall through -- invalid for A32/T32 */ |
| default: |
| fprintf(stderr, "qemu: Unsupported SemiHosting SWI 0x%02x\n", nr); |
| cpu_dump_state(cs, stderr, 0); |
| abort(); |
| } |
| } |