| /* |
| * Renesas SH7751R R2D-PLUS emulation |
| * |
| * Copyright (c) 2007 Magnus Damm |
| * Copyright (c) 2008 Paul Mundt |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "hw.h" |
| #include "sh.h" |
| #include "devices.h" |
| #include "sysemu.h" |
| #include "boards.h" |
| #include "pci.h" |
| #include "sh_pci.h" |
| #include "net.h" |
| #include "sh7750_regs.h" |
| #include "ide.h" |
| #include "loader.h" |
| #include "usb.h" |
| #include "flash.h" |
| #include "blockdev.h" |
| |
| #define FLASH_BASE 0x00000000 |
| #define FLASH_SIZE 0x02000000 |
| |
| #define SDRAM_BASE 0x0c000000 /* Physical location of SDRAM: Area 3 */ |
| #define SDRAM_SIZE 0x04000000 |
| |
| #define SM501_VRAM_SIZE 0x800000 |
| |
| #define BOOT_PARAMS_OFFSET 0x0010000 |
| /* CONFIG_BOOT_LINK_OFFSET of Linux kernel */ |
| #define LINUX_LOAD_OFFSET 0x0800000 |
| #define INITRD_LOAD_OFFSET 0x1800000 |
| |
| #define PA_IRLMSK 0x00 |
| #define PA_POWOFF 0x30 |
| #define PA_VERREG 0x32 |
| #define PA_OUTPORT 0x36 |
| |
| typedef struct { |
| uint16_t bcr; |
| uint16_t irlmsk; |
| uint16_t irlmon; |
| uint16_t cfctl; |
| uint16_t cfpow; |
| uint16_t dispctl; |
| uint16_t sdmpow; |
| uint16_t rtcce; |
| uint16_t pcicd; |
| uint16_t voyagerrts; |
| uint16_t cfrst; |
| uint16_t admrts; |
| uint16_t extrst; |
| uint16_t cfcdintclr; |
| uint16_t keyctlclr; |
| uint16_t pad0; |
| uint16_t pad1; |
| uint16_t verreg; |
| uint16_t inport; |
| uint16_t outport; |
| uint16_t bverreg; |
| |
| /* output pin */ |
| qemu_irq irl; |
| } r2d_fpga_t; |
| |
| enum r2d_fpga_irq { |
| PCI_INTD, CF_IDE, CF_CD, PCI_INTC, SM501, KEY, RTC_A, RTC_T, |
| SDCARD, PCI_INTA, PCI_INTB, EXT, TP, |
| NR_IRQS |
| }; |
| |
| static const struct { short irl; uint16_t msk; } irqtab[NR_IRQS] = { |
| [CF_IDE] = { 1, 1<<9 }, |
| [CF_CD] = { 2, 1<<8 }, |
| [PCI_INTA] = { 9, 1<<14 }, |
| [PCI_INTB] = { 10, 1<<13 }, |
| [PCI_INTC] = { 3, 1<<12 }, |
| [PCI_INTD] = { 0, 1<<11 }, |
| [SM501] = { 4, 1<<10 }, |
| [KEY] = { 5, 1<<6 }, |
| [RTC_A] = { 6, 1<<5 }, |
| [RTC_T] = { 7, 1<<4 }, |
| [SDCARD] = { 8, 1<<7 }, |
| [EXT] = { 11, 1<<0 }, |
| [TP] = { 12, 1<<15 }, |
| }; |
| |
| static void update_irl(r2d_fpga_t *fpga) |
| { |
| int i, irl = 15; |
| for (i = 0; i < NR_IRQS; i++) |
| if (fpga->irlmon & fpga->irlmsk & irqtab[i].msk) |
| if (irqtab[i].irl < irl) |
| irl = irqtab[i].irl; |
| qemu_set_irq(fpga->irl, irl ^ 15); |
| } |
| |
| static void r2d_fpga_irq_set(void *opaque, int n, int level) |
| { |
| r2d_fpga_t *fpga = opaque; |
| if (level) |
| fpga->irlmon |= irqtab[n].msk; |
| else |
| fpga->irlmon &= ~irqtab[n].msk; |
| update_irl(fpga); |
| } |
| |
| static uint32_t r2d_fpga_read(void *opaque, target_phys_addr_t addr) |
| { |
| r2d_fpga_t *s = opaque; |
| |
| switch (addr) { |
| case PA_IRLMSK: |
| return s->irlmsk; |
| case PA_OUTPORT: |
| return s->outport; |
| case PA_POWOFF: |
| return 0x00; |
| case PA_VERREG: |
| return 0x10; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| r2d_fpga_write(void *opaque, target_phys_addr_t addr, uint32_t value) |
| { |
| r2d_fpga_t *s = opaque; |
| |
| switch (addr) { |
| case PA_IRLMSK: |
| s->irlmsk = value; |
| update_irl(s); |
| break; |
| case PA_OUTPORT: |
| s->outport = value; |
| break; |
| case PA_POWOFF: |
| if (value & 1) { |
| qemu_system_shutdown_request(); |
| } |
| break; |
| case PA_VERREG: |
| /* Discard writes */ |
| break; |
| } |
| } |
| |
| static CPUReadMemoryFunc * const r2d_fpga_readfn[] = { |
| r2d_fpga_read, |
| r2d_fpga_read, |
| NULL, |
| }; |
| |
| static CPUWriteMemoryFunc * const r2d_fpga_writefn[] = { |
| r2d_fpga_write, |
| r2d_fpga_write, |
| NULL, |
| }; |
| |
| static qemu_irq *r2d_fpga_init(target_phys_addr_t base, qemu_irq irl) |
| { |
| int iomemtype; |
| r2d_fpga_t *s; |
| |
| s = qemu_mallocz(sizeof(r2d_fpga_t)); |
| |
| s->irl = irl; |
| |
| iomemtype = cpu_register_io_memory(r2d_fpga_readfn, |
| r2d_fpga_writefn, s, |
| DEVICE_NATIVE_ENDIAN); |
| cpu_register_physical_memory(base, 0x40, iomemtype); |
| return qemu_allocate_irqs(r2d_fpga_irq_set, s, NR_IRQS); |
| } |
| |
| static void r2d_pci_set_irq(void *opaque, int n, int l) |
| { |
| qemu_irq *p = opaque; |
| |
| qemu_set_irq(p[n], l); |
| } |
| |
| static int r2d_pci_map_irq(PCIDevice *d, int irq_num) |
| { |
| const int intx[] = { PCI_INTA, PCI_INTB, PCI_INTC, PCI_INTD }; |
| return intx[d->devfn >> 3]; |
| } |
| |
| static struct __attribute__((__packed__)) |
| { |
| int mount_root_rdonly; |
| int ramdisk_flags; |
| int orig_root_dev; |
| int loader_type; |
| int initrd_start; |
| int initrd_size; |
| |
| char pad[232]; |
| |
| char kernel_cmdline[256]; |
| } boot_params; |
| |
| static void r2d_init(ram_addr_t ram_size, |
| const char *boot_device, |
| const char *kernel_filename, const char *kernel_cmdline, |
| const char *initrd_filename, const char *cpu_model) |
| { |
| CPUState *env; |
| struct SH7750State *s; |
| ram_addr_t sdram_addr; |
| qemu_irq *irq; |
| DriveInfo *dinfo; |
| int i; |
| |
| if (!cpu_model) |
| cpu_model = "SH7751R"; |
| |
| env = cpu_init(cpu_model); |
| if (!env) { |
| fprintf(stderr, "Unable to find CPU definition\n"); |
| exit(1); |
| } |
| |
| /* Allocate memory space */ |
| sdram_addr = qemu_ram_alloc(NULL, "r2d.sdram", SDRAM_SIZE); |
| cpu_register_physical_memory(SDRAM_BASE, SDRAM_SIZE, sdram_addr); |
| /* Register peripherals */ |
| s = sh7750_init(env); |
| irq = r2d_fpga_init(0x04000000, sh7750_irl(s)); |
| sh_pci_register_bus(r2d_pci_set_irq, r2d_pci_map_irq, irq, 0, 4); |
| |
| sm501_init(0x10000000, SM501_VRAM_SIZE, irq[SM501], serial_hds[2]); |
| |
| /* onboard CF (True IDE mode, Master only). */ |
| dinfo = drive_get(IF_IDE, 0, 0); |
| mmio_ide_init(0x14001000, 0x1400080c, irq[CF_IDE], 1, |
| dinfo, NULL); |
| |
| /* onboard flash memory */ |
| dinfo = drive_get(IF_PFLASH, 0, 0); |
| pflash_cfi02_register(0x0, qemu_ram_alloc(NULL, "r2d.flash", FLASH_SIZE), |
| dinfo ? dinfo->bdrv : NULL, (16 * 1024), |
| FLASH_SIZE >> 16, |
| 1, 4, 0x0000, 0x0000, 0x0000, 0x0000, |
| 0x555, 0x2aa, 0); |
| |
| /* NIC: rtl8139 on-board, and 2 slots. */ |
| for (i = 0; i < nb_nics; i++) |
| pci_nic_init_nofail(&nd_table[i], "rtl8139", i==0 ? "2" : NULL); |
| |
| /* USB keyboard */ |
| usbdevice_create("keyboard"); |
| |
| /* Todo: register on board registers */ |
| memset(&boot_params, 0, sizeof(boot_params)); |
| |
| if (kernel_filename) { |
| int kernel_size; |
| |
| kernel_size = load_image_targphys(kernel_filename, |
| SDRAM_BASE + LINUX_LOAD_OFFSET, |
| INITRD_LOAD_OFFSET - LINUX_LOAD_OFFSET); |
| if (kernel_size < 0) { |
| fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename); |
| exit(1); |
| } |
| |
| /* initialization which should be done by firmware */ |
| stl_phys(SH7750_BCR1, 1<<3); /* cs3 SDRAM */ |
| stw_phys(SH7750_BCR2, 3<<(3*2)); /* cs3 32bit */ |
| env->pc = (SDRAM_BASE + LINUX_LOAD_OFFSET) | 0xa0000000; /* Start from P2 area */ |
| } |
| |
| if (initrd_filename) { |
| int initrd_size; |
| |
| initrd_size = load_image_targphys(initrd_filename, |
| SDRAM_BASE + INITRD_LOAD_OFFSET, |
| SDRAM_SIZE - INITRD_LOAD_OFFSET); |
| |
| if (initrd_size < 0) { |
| fprintf(stderr, "qemu: could not load initrd '%s'\n", initrd_filename); |
| exit(1); |
| } |
| |
| /* initialization which should be done by firmware */ |
| boot_params.loader_type = 1; |
| boot_params.initrd_start = INITRD_LOAD_OFFSET; |
| boot_params.initrd_size = initrd_size; |
| } |
| |
| if (kernel_cmdline) { |
| strncpy(boot_params.kernel_cmdline, kernel_cmdline, |
| sizeof(boot_params.kernel_cmdline)); |
| } |
| |
| rom_add_blob_fixed("boot_params", &boot_params, sizeof(boot_params), |
| SDRAM_BASE + BOOT_PARAMS_OFFSET); |
| } |
| |
| static QEMUMachine r2d_machine = { |
| .name = "r2d", |
| .desc = "r2d-plus board", |
| .init = r2d_init, |
| }; |
| |
| static void r2d_machine_init(void) |
| { |
| qemu_register_machine(&r2d_machine); |
| } |
| |
| machine_init(r2d_machine_init); |