| HXCOMM QMP dispatch table and documentation |
| HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and |
| HXCOMM does not show up in the other formats. |
| |
| SQMP |
| QMP Supported Commands |
| ---------------------- |
| |
| This document describes all commands currently supported by QMP. |
| |
| Most of the time their usage is exactly the same as in the user Monitor, this |
| means that any other document which also describe commands (the manpage, |
| QEMU's manual, etc) can and should be consulted. |
| |
| QMP has two types of commands: regular and query commands. Regular commands |
| usually change the Virtual Machine's state someway, while query commands just |
| return information. The sections below are divided accordingly. |
| |
| It's important to observe that all communication examples are formatted in |
| a reader-friendly way, so that they're easier to understand. However, in real |
| protocol usage, they're emitted as a single line. |
| |
| Also, the following notation is used to denote data flow: |
| |
| -> data issued by the Client |
| <- Server data response |
| |
| Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed |
| information on the Server command and response formats. |
| |
| NOTE: This document is temporary and will be replaced soon. |
| |
| 1. Stability Considerations |
| =========================== |
| |
| The current QMP command set (described in this file) may be useful for a |
| number of use cases, however it's limited and several commands have bad |
| defined semantics, specially with regard to command completion. |
| |
| These problems are going to be solved incrementally in the next QEMU releases |
| and we're going to establish a deprecation policy for badly defined commands. |
| |
| If you're planning to adopt QMP, please observe the following: |
| |
| 1. The deprecation policy will take effect and be documented soon, please |
| check the documentation of each used command as soon as a new release of |
| QEMU is available |
| |
| 2. DO NOT rely on anything which is not explicit documented |
| |
| 3. Errors, in special, are not documented. Applications should NOT check |
| for specific errors classes or data (it's strongly recommended to only |
| check for the "error" key) |
| |
| 2. Regular Commands |
| =================== |
| |
| Server's responses in the examples below are always a success response, please |
| refer to the QMP specification for more details on error responses. |
| |
| EQMP |
| |
| { |
| .name = "quit", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_quit, |
| }, |
| |
| SQMP |
| quit |
| ---- |
| |
| Quit the emulator. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "quit" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "eject", |
| .args_type = "force:-f,device:B", |
| .mhandler.cmd_new = qmp_marshal_input_eject, |
| }, |
| |
| SQMP |
| eject |
| ----- |
| |
| Eject a removable medium. |
| |
| Arguments: |
| |
| - force: force ejection (json-bool, optional) |
| - device: device name (json-string) |
| |
| Example: |
| |
| -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } } |
| <- { "return": {} } |
| |
| Note: The "force" argument defaults to false. |
| |
| EQMP |
| |
| { |
| .name = "change", |
| .args_type = "device:B,target:F,arg:s?", |
| .mhandler.cmd_new = qmp_marshal_input_change, |
| }, |
| |
| SQMP |
| change |
| ------ |
| |
| Change a removable medium or VNC configuration. |
| |
| Arguments: |
| |
| - "device": device name (json-string) |
| - "target": filename or item (json-string) |
| - "arg": additional argument (json-string, optional) |
| |
| Examples: |
| |
| 1. Change a removable medium |
| |
| -> { "execute": "change", |
| "arguments": { "device": "ide1-cd0", |
| "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } } |
| <- { "return": {} } |
| |
| 2. Change VNC password |
| |
| -> { "execute": "change", |
| "arguments": { "device": "vnc", "target": "password", |
| "arg": "foobar1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "screendump", |
| .args_type = "filename:F", |
| .mhandler.cmd_new = qmp_marshal_input_screendump, |
| }, |
| |
| SQMP |
| screendump |
| ---------- |
| |
| Save screen into PPM image. |
| |
| Arguments: |
| |
| - "filename": file path (json-string) |
| |
| Example: |
| |
| -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "stop", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_stop, |
| }, |
| |
| SQMP |
| stop |
| ---- |
| |
| Stop the emulator. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "stop" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "cont", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_cont, |
| }, |
| |
| SQMP |
| cont |
| ---- |
| |
| Resume emulation. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "cont" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "system_wakeup", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_system_wakeup, |
| }, |
| |
| SQMP |
| system_wakeup |
| ------------- |
| |
| Wakeup guest from suspend. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "system_wakeup" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "system_reset", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_system_reset, |
| }, |
| |
| SQMP |
| system_reset |
| ------------ |
| |
| Reset the system. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "system_reset" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "system_powerdown", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_system_powerdown, |
| }, |
| |
| SQMP |
| system_powerdown |
| ---------------- |
| |
| Send system power down event. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "system_powerdown" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "device_add", |
| .args_type = "device:O", |
| .params = "driver[,prop=value][,...]", |
| .help = "add device, like -device on the command line", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_device_add, |
| }, |
| |
| SQMP |
| device_add |
| ---------- |
| |
| Add a device. |
| |
| Arguments: |
| |
| - "driver": the name of the new device's driver (json-string) |
| - "bus": the device's parent bus (device tree path, json-string, optional) |
| - "id": the device's ID, must be unique (json-string) |
| - device properties |
| |
| Example: |
| |
| -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } } |
| <- { "return": {} } |
| |
| Notes: |
| |
| (1) For detailed information about this command, please refer to the |
| 'docs/qdev-device-use.txt' file. |
| |
| (2) It's possible to list device properties by running QEMU with the |
| "-device DEVICE,\?" command-line argument, where DEVICE is the device's name |
| |
| EQMP |
| |
| { |
| .name = "device_del", |
| .args_type = "id:s", |
| .mhandler.cmd_new = qmp_marshal_input_device_del, |
| }, |
| |
| SQMP |
| device_del |
| ---------- |
| |
| Remove a device. |
| |
| Arguments: |
| |
| - "id": the device's ID (json-string) |
| |
| Example: |
| |
| -> { "execute": "device_del", "arguments": { "id": "net1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "send-key", |
| .args_type = "keys:O,hold-time:i?", |
| .mhandler.cmd_new = qmp_marshal_input_send_key, |
| }, |
| |
| SQMP |
| send-key |
| ---------- |
| |
| Send keys to VM. |
| |
| Arguments: |
| |
| keys array: |
| - "key": key sequence (a json-array of key enum values) |
| |
| - hold-time: time to delay key up events, milliseconds. Defaults to 100 |
| (json-int, optional) |
| |
| Example: |
| |
| -> { "execute": "send-key", |
| "arguments": { 'keys': [ 'ctrl', 'alt', 'delete' ] } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "cpu", |
| .args_type = "index:i", |
| .mhandler.cmd_new = qmp_marshal_input_cpu, |
| }, |
| |
| SQMP |
| cpu |
| --- |
| |
| Set the default CPU. |
| |
| Arguments: |
| |
| - "index": the CPU's index (json-int) |
| |
| Example: |
| |
| -> { "execute": "cpu", "arguments": { "index": 0 } } |
| <- { "return": {} } |
| |
| Note: CPUs' indexes are obtained with the 'query-cpus' command. |
| |
| EQMP |
| |
| { |
| .name = "memsave", |
| .args_type = "val:l,size:i,filename:s,cpu:i?", |
| .mhandler.cmd_new = qmp_marshal_input_memsave, |
| }, |
| |
| SQMP |
| memsave |
| ------- |
| |
| Save to disk virtual memory dump starting at 'val' of size 'size'. |
| |
| Arguments: |
| |
| - "val": the starting address (json-int) |
| - "size": the memory size, in bytes (json-int) |
| - "filename": file path (json-string) |
| - "cpu": virtual CPU index (json-int, optional) |
| |
| Example: |
| |
| -> { "execute": "memsave", |
| "arguments": { "val": 10, |
| "size": 100, |
| "filename": "/tmp/virtual-mem-dump" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "pmemsave", |
| .args_type = "val:l,size:i,filename:s", |
| .mhandler.cmd_new = qmp_marshal_input_pmemsave, |
| }, |
| |
| SQMP |
| pmemsave |
| -------- |
| |
| Save to disk physical memory dump starting at 'val' of size 'size'. |
| |
| Arguments: |
| |
| - "val": the starting address (json-int) |
| - "size": the memory size, in bytes (json-int) |
| - "filename": file path (json-string) |
| |
| Example: |
| |
| -> { "execute": "pmemsave", |
| "arguments": { "val": 10, |
| "size": 100, |
| "filename": "/tmp/physical-mem-dump" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "inject-nmi", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_inject_nmi, |
| }, |
| |
| SQMP |
| inject-nmi |
| ---------- |
| |
| Inject an NMI on guest's CPUs. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "inject-nmi" } |
| <- { "return": {} } |
| |
| Note: inject-nmi fails when the guest doesn't support injecting. |
| Currently, only x86 guests do. |
| |
| EQMP |
| |
| { |
| .name = "ringbuf-write", |
| .args_type = "device:s,data:s,format:s?", |
| .mhandler.cmd_new = qmp_marshal_input_ringbuf_write, |
| }, |
| |
| SQMP |
| ringbuf-write |
| ------------- |
| |
| Write to a ring buffer character device. |
| |
| Arguments: |
| |
| - "device": ring buffer character device name (json-string) |
| - "data": data to write (json-string) |
| - "format": data format (json-string, optional) |
| - Possible values: "utf8" (default), "base64" |
| Bug: invalid base64 is currently not rejected. |
| Whitespace *is* invalid. |
| |
| Example: |
| |
| -> { "execute": "ringbuf-write", |
| "arguments": { "device": "foo", |
| "data": "abcdefgh", |
| "format": "utf8" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "ringbuf-read", |
| .args_type = "device:s,size:i,format:s?", |
| .mhandler.cmd_new = qmp_marshal_input_ringbuf_read, |
| }, |
| |
| SQMP |
| ringbuf-read |
| ------------- |
| |
| Read from a ring buffer character device. |
| |
| Arguments: |
| |
| - "device": ring buffer character device name (json-string) |
| - "size": how many bytes to read at most (json-int) |
| - Number of data bytes, not number of characters in encoded data |
| - "format": data format (json-string, optional) |
| - Possible values: "utf8" (default), "base64" |
| - Naturally, format "utf8" works only when the ring buffer |
| contains valid UTF-8 text. Invalid UTF-8 sequences get |
| replaced. Bug: replacement doesn't work. Bug: can screw |
| up on encountering NUL characters, after the ring buffer |
| lost data, and when reading stops because the size limit |
| is reached. |
| |
| Example: |
| |
| -> { "execute": "ringbuf-read", |
| "arguments": { "device": "foo", |
| "size": 1000, |
| "format": "utf8" } } |
| <- {"return": "abcdefgh"} |
| |
| EQMP |
| |
| { |
| .name = "xen-save-devices-state", |
| .args_type = "filename:F", |
| .mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state, |
| }, |
| |
| SQMP |
| xen-save-devices-state |
| ------- |
| |
| Save the state of all devices to file. The RAM and the block devices |
| of the VM are not saved by this command. |
| |
| Arguments: |
| |
| - "filename": the file to save the state of the devices to as binary |
| data. See xen-save-devices-state.txt for a description of the binary |
| format. |
| |
| Example: |
| |
| -> { "execute": "xen-save-devices-state", |
| "arguments": { "filename": "/tmp/save" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "xen-set-global-dirty-log", |
| .args_type = "enable:b", |
| .mhandler.cmd_new = qmp_marshal_input_xen_set_global_dirty_log, |
| }, |
| |
| SQMP |
| xen-set-global-dirty-log |
| ------- |
| |
| Enable or disable the global dirty log mode. |
| |
| Arguments: |
| |
| - "enable": Enable it or disable it. |
| |
| Example: |
| |
| -> { "execute": "xen-set-global-dirty-log", |
| "arguments": { "enable": true } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "migrate", |
| .args_type = "detach:-d,blk:-b,inc:-i,uri:s", |
| .mhandler.cmd_new = qmp_marshal_input_migrate, |
| }, |
| |
| SQMP |
| migrate |
| ------- |
| |
| Migrate to URI. |
| |
| Arguments: |
| |
| - "blk": block migration, full disk copy (json-bool, optional) |
| - "inc": incremental disk copy (json-bool, optional) |
| - "uri": Destination URI (json-string) |
| |
| Example: |
| |
| -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } } |
| <- { "return": {} } |
| |
| Notes: |
| |
| (1) The 'query-migrate' command should be used to check migration's progress |
| and final result (this information is provided by the 'status' member) |
| (2) All boolean arguments default to false |
| (3) The user Monitor's "detach" argument is invalid in QMP and should not |
| be used |
| |
| EQMP |
| |
| { |
| .name = "migrate_cancel", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_migrate_cancel, |
| }, |
| |
| SQMP |
| migrate_cancel |
| -------------- |
| |
| Cancel the current migration. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "migrate_cancel" } |
| <- { "return": {} } |
| |
| EQMP |
| { |
| .name = "migrate-set-cache-size", |
| .args_type = "value:o", |
| .mhandler.cmd_new = qmp_marshal_input_migrate_set_cache_size, |
| }, |
| |
| SQMP |
| migrate-set-cache-size |
| --------------------- |
| |
| Set cache size to be used by XBZRLE migration, the cache size will be rounded |
| down to the nearest power of 2 |
| |
| Arguments: |
| |
| - "value": cache size in bytes (json-int) |
| |
| Example: |
| |
| -> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } } |
| <- { "return": {} } |
| |
| EQMP |
| { |
| .name = "query-migrate-cache-size", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_migrate_cache_size, |
| }, |
| |
| SQMP |
| query-migrate-cache-size |
| --------------------- |
| |
| Show cache size to be used by XBZRLE migration |
| |
| returns a json-object with the following information: |
| - "size" : json-int |
| |
| Example: |
| |
| -> { "execute": "query-migrate-cache-size" } |
| <- { "return": 67108864 } |
| |
| EQMP |
| |
| { |
| .name = "migrate_set_speed", |
| .args_type = "value:o", |
| .mhandler.cmd_new = qmp_marshal_input_migrate_set_speed, |
| }, |
| |
| SQMP |
| migrate_set_speed |
| ----------------- |
| |
| Set maximum speed for migrations. |
| |
| Arguments: |
| |
| - "value": maximum speed, in bytes per second (json-int) |
| |
| Example: |
| |
| -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "migrate_set_downtime", |
| .args_type = "value:T", |
| .mhandler.cmd_new = qmp_marshal_input_migrate_set_downtime, |
| }, |
| |
| SQMP |
| migrate_set_downtime |
| -------------------- |
| |
| Set maximum tolerated downtime (in seconds) for migrations. |
| |
| Arguments: |
| |
| - "value": maximum downtime (json-number) |
| |
| Example: |
| |
| -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "client_migrate_info", |
| .args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?", |
| .params = "protocol hostname port tls-port cert-subject", |
| .help = "send migration info to spice/vnc client", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_async = client_migrate_info, |
| .flags = MONITOR_CMD_ASYNC, |
| }, |
| |
| SQMP |
| client_migrate_info |
| ------------------ |
| |
| Set the spice/vnc connection info for the migration target. The spice/vnc |
| server will ask the spice/vnc client to automatically reconnect using the |
| new parameters (if specified) once the vm migration finished successfully. |
| |
| Arguments: |
| |
| - "protocol": protocol: "spice" or "vnc" (json-string) |
| - "hostname": migration target hostname (json-string) |
| - "port": spice/vnc tcp port for plaintext channels (json-int, optional) |
| - "tls-port": spice tcp port for tls-secured channels (json-int, optional) |
| - "cert-subject": server certificate subject (json-string, optional) |
| |
| Example: |
| |
| -> { "execute": "client_migrate_info", |
| "arguments": { "protocol": "spice", |
| "hostname": "virt42.lab.kraxel.org", |
| "port": 1234 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "dump-guest-memory", |
| .args_type = "paging:b,protocol:s,begin:i?,end:i?", |
| .params = "-p protocol [begin] [length]", |
| .help = "dump guest memory to file", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = qmp_marshal_input_dump_guest_memory, |
| }, |
| |
| SQMP |
| dump |
| |
| |
| Dump guest memory to file. The file can be processed with crash or gdb. |
| |
| Arguments: |
| |
| - "paging": do paging to get guest's memory mapping (json-bool) |
| - "protocol": destination file(started with "file:") or destination file |
| descriptor (started with "fd:") (json-string) |
| - "begin": the starting physical address. It's optional, and should be specified |
| with length together (json-int) |
| - "length": the memory size, in bytes. It's optional, and should be specified |
| with begin together (json-int) |
| |
| Example: |
| |
| -> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } } |
| <- { "return": {} } |
| |
| Notes: |
| |
| (1) All boolean arguments default to false |
| |
| EQMP |
| |
| { |
| .name = "netdev_add", |
| .args_type = "netdev:O", |
| .mhandler.cmd_new = qmp_netdev_add, |
| }, |
| |
| SQMP |
| netdev_add |
| ---------- |
| |
| Add host network device. |
| |
| Arguments: |
| |
| - "type": the device type, "tap", "user", ... (json-string) |
| - "id": the device's ID, must be unique (json-string) |
| - device options |
| |
| Example: |
| |
| -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } |
| <- { "return": {} } |
| |
| Note: The supported device options are the same ones supported by the '-net' |
| command-line argument, which are listed in the '-help' output or QEMU's |
| manual |
| |
| EQMP |
| |
| { |
| .name = "netdev_del", |
| .args_type = "id:s", |
| .mhandler.cmd_new = qmp_marshal_input_netdev_del, |
| }, |
| |
| SQMP |
| netdev_del |
| ---------- |
| |
| Remove host network device. |
| |
| Arguments: |
| |
| - "id": the device's ID, must be unique (json-string) |
| |
| Example: |
| |
| -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } |
| <- { "return": {} } |
| |
| |
| EQMP |
| |
| { |
| .name = "block_resize", |
| .args_type = "device:B,size:o", |
| .mhandler.cmd_new = qmp_marshal_input_block_resize, |
| }, |
| |
| SQMP |
| block_resize |
| ------------ |
| |
| Resize a block image while a guest is running. |
| |
| Arguments: |
| |
| - "device": the device's ID, must be unique (json-string) |
| - "size": new size |
| |
| Example: |
| |
| -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "block-stream", |
| .args_type = "device:B,base:s?,speed:o?,on-error:s?", |
| .mhandler.cmd_new = qmp_marshal_input_block_stream, |
| }, |
| |
| { |
| .name = "block-commit", |
| .args_type = "device:B,base:s?,top:s,speed:o?", |
| .mhandler.cmd_new = qmp_marshal_input_block_commit, |
| }, |
| |
| { |
| .name = "block-job-set-speed", |
| .args_type = "device:B,speed:o", |
| .mhandler.cmd_new = qmp_marshal_input_block_job_set_speed, |
| }, |
| |
| { |
| .name = "block-job-cancel", |
| .args_type = "device:B,force:b?", |
| .mhandler.cmd_new = qmp_marshal_input_block_job_cancel, |
| }, |
| { |
| .name = "block-job-pause", |
| .args_type = "device:B", |
| .mhandler.cmd_new = qmp_marshal_input_block_job_pause, |
| }, |
| { |
| .name = "block-job-resume", |
| .args_type = "device:B", |
| .mhandler.cmd_new = qmp_marshal_input_block_job_resume, |
| }, |
| { |
| .name = "block-job-complete", |
| .args_type = "device:B", |
| .mhandler.cmd_new = qmp_marshal_input_block_job_complete, |
| }, |
| { |
| .name = "transaction", |
| .args_type = "actions:q", |
| .mhandler.cmd_new = qmp_marshal_input_transaction, |
| }, |
| |
| SQMP |
| transaction |
| ----------- |
| |
| Atomically operate on one or more block devices. The only supported |
| operation for now is snapshotting. If there is any failure performing |
| any of the operations, all snapshots for the group are abandoned, and |
| the original disks pre-snapshot attempt are used. |
| |
| A list of dictionaries is accepted, that contains the actions to be performed. |
| For snapshots this is the device, the file to use for the new snapshot, |
| and the format. The default format, if not specified, is qcow2. |
| |
| Each new snapshot defaults to being created by QEMU (wiping any |
| contents if the file already exists), but it is also possible to reuse |
| an externally-created file. In the latter case, you should ensure that |
| the new image file has the same contents as the current one; QEMU cannot |
| perform any meaningful check. Typically this is achieved by using the |
| current image file as the backing file for the new image. |
| |
| Arguments: |
| |
| actions array: |
| - "type": the operation to perform. The only supported |
| value is "blockdev-snapshot-sync". (json-string) |
| - "data": a dictionary. The contents depend on the value |
| of "type". When "type" is "blockdev-snapshot-sync": |
| - "device": device name to snapshot (json-string) |
| - "snapshot-file": name of new image file (json-string) |
| - "format": format of new image (json-string, optional) |
| - "mode": whether and how QEMU should create the snapshot file |
| (NewImageMode, optional, default "absolute-paths") |
| |
| Example: |
| |
| -> { "execute": "transaction", |
| "arguments": { "actions": [ |
| { 'type': 'blockdev-snapshot-sync', 'data' : { "device": "ide-hd0", |
| "snapshot-file": "/some/place/my-image", |
| "format": "qcow2" } }, |
| { 'type': 'blockdev-snapshot-sync', 'data' : { "device": "ide-hd1", |
| "snapshot-file": "/some/place/my-image2", |
| "mode": "existing", |
| "format": "qcow2" } } ] } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "blockdev-snapshot-sync", |
| .args_type = "device:B,snapshot-file:s,format:s?,mode:s?", |
| .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync, |
| }, |
| |
| SQMP |
| blockdev-snapshot-sync |
| ---------------------- |
| |
| Synchronous snapshot of a block device. snapshot-file specifies the |
| target of the new image. If the file exists, or if it is a device, the |
| snapshot will be created in the existing file/device. If does not |
| exist, a new file will be created. format specifies the format of the |
| snapshot image, default is qcow2. |
| |
| Arguments: |
| |
| - "device": device name to snapshot (json-string) |
| - "snapshot-file": name of new image file (json-string) |
| - "mode": whether and how QEMU should create the snapshot file |
| (NewImageMode, optional, default "absolute-paths") |
| - "format": format of new image (json-string, optional) |
| |
| Example: |
| |
| -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0", |
| "snapshot-file": |
| "/some/place/my-image", |
| "format": "qcow2" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "drive-mirror", |
| .args_type = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?," |
| "on-source-error:s?,on-target-error:s?," |
| "granularity:i?,buf-size:i?", |
| .mhandler.cmd_new = qmp_marshal_input_drive_mirror, |
| }, |
| |
| SQMP |
| drive-mirror |
| ------------ |
| |
| Start mirroring a block device's writes to a new destination. target |
| specifies the target of the new image. If the file exists, or if it is |
| a device, it will be used as the new destination for writes. If it does not |
| exist, a new file will be created. format specifies the format of the |
| mirror image, default is to probe if mode='existing', else the format |
| of the source. |
| |
| Arguments: |
| |
| - "device": device name to operate on (json-string) |
| - "target": name of new image file (json-string) |
| - "format": format of new image (json-string, optional) |
| - "mode": how an image file should be created into the target |
| file/device (NewImageMode, optional, default 'absolute-paths') |
| - "speed": maximum speed of the streaming job, in bytes per second |
| (json-int) |
| - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional) |
| - "buf_size": maximum amount of data in flight from source to target, in bytes |
| (json-int, default 10M) |
| - "sync": what parts of the disk image should be copied to the destination; |
| possibilities include "full" for all the disk, "top" for only the sectors |
| allocated in the topmost image, or "none" to only replicate new I/O |
| (MirrorSyncMode). |
| - "on-source-error": the action to take on an error on the source |
| (BlockdevOnError, default 'report') |
| - "on-target-error": the action to take on an error on the target |
| (BlockdevOnError, default 'report') |
| |
| The default value of the granularity is the image cluster size clamped |
| between 4096 and 65536, if the image format defines one. If the format |
| does not define a cluster size, the default value of the granularity |
| is 65536. |
| |
| |
| Example: |
| |
| -> { "execute": "drive-mirror", "arguments": { "device": "ide-hd0", |
| "target": "/some/place/my-image", |
| "sync": "full", |
| "format": "qcow2" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "balloon", |
| .args_type = "value:M", |
| .mhandler.cmd_new = qmp_marshal_input_balloon, |
| }, |
| |
| SQMP |
| balloon |
| ------- |
| |
| Request VM to change its memory allocation (in bytes). |
| |
| Arguments: |
| |
| - "value": New memory allocation (json-int) |
| |
| Example: |
| |
| -> { "execute": "balloon", "arguments": { "value": 536870912 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "set_link", |
| .args_type = "name:s,up:b", |
| .mhandler.cmd_new = qmp_marshal_input_set_link, |
| }, |
| |
| SQMP |
| set_link |
| -------- |
| |
| Change the link status of a network adapter. |
| |
| Arguments: |
| |
| - "name": network device name (json-string) |
| - "up": status is up (json-bool) |
| |
| Example: |
| |
| -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "getfd", |
| .args_type = "fdname:s", |
| .params = "getfd name", |
| .help = "receive a file descriptor via SCM rights and assign it a name", |
| .mhandler.cmd_new = qmp_marshal_input_getfd, |
| }, |
| |
| SQMP |
| getfd |
| ----- |
| |
| Receive a file descriptor via SCM rights and assign it a name. |
| |
| Arguments: |
| |
| - "fdname": file descriptor name (json-string) |
| |
| Example: |
| |
| -> { "execute": "getfd", "arguments": { "fdname": "fd1" } } |
| <- { "return": {} } |
| |
| Notes: |
| |
| (1) If the name specified by the "fdname" argument already exists, |
| the file descriptor assigned to it will be closed and replaced |
| by the received file descriptor. |
| (2) The 'closefd' command can be used to explicitly close the file |
| descriptor when it is no longer needed. |
| |
| EQMP |
| |
| { |
| .name = "closefd", |
| .args_type = "fdname:s", |
| .params = "closefd name", |
| .help = "close a file descriptor previously passed via SCM rights", |
| .mhandler.cmd_new = qmp_marshal_input_closefd, |
| }, |
| |
| SQMP |
| closefd |
| ------- |
| |
| Close a file descriptor previously passed via SCM rights. |
| |
| Arguments: |
| |
| - "fdname": file descriptor name (json-string) |
| |
| Example: |
| |
| -> { "execute": "closefd", "arguments": { "fdname": "fd1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "add-fd", |
| .args_type = "fdset-id:i?,opaque:s?", |
| .params = "add-fd fdset-id opaque", |
| .help = "Add a file descriptor, that was passed via SCM rights, to an fd set", |
| .mhandler.cmd_new = qmp_marshal_input_add_fd, |
| }, |
| |
| SQMP |
| add-fd |
| ------- |
| |
| Add a file descriptor, that was passed via SCM rights, to an fd set. |
| |
| Arguments: |
| |
| - "fdset-id": The ID of the fd set to add the file descriptor to. |
| (json-int, optional) |
| - "opaque": A free-form string that can be used to describe the fd. |
| (json-string, optional) |
| |
| Return a json-object with the following information: |
| |
| - "fdset-id": The ID of the fd set that the fd was added to. (json-int) |
| - "fd": The file descriptor that was received via SCM rights and added to the |
| fd set. (json-int) |
| |
| Example: |
| |
| -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } } |
| <- { "return": { "fdset-id": 1, "fd": 3 } } |
| |
| Notes: |
| |
| (1) The list of fd sets is shared by all monitor connections. |
| (2) If "fdset-id" is not specified, a new fd set will be created. |
| |
| EQMP |
| |
| { |
| .name = "remove-fd", |
| .args_type = "fdset-id:i,fd:i?", |
| .params = "remove-fd fdset-id fd", |
| .help = "Remove a file descriptor from an fd set", |
| .mhandler.cmd_new = qmp_marshal_input_remove_fd, |
| }, |
| |
| SQMP |
| remove-fd |
| --------- |
| |
| Remove a file descriptor from an fd set. |
| |
| Arguments: |
| |
| - "fdset-id": The ID of the fd set that the file descriptor belongs to. |
| (json-int) |
| - "fd": The file descriptor that is to be removed. (json-int, optional) |
| |
| Example: |
| |
| -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } } |
| <- { "return": {} } |
| |
| Notes: |
| |
| (1) The list of fd sets is shared by all monitor connections. |
| (2) If "fd" is not specified, all file descriptors in "fdset-id" will be |
| removed. |
| |
| EQMP |
| |
| { |
| .name = "query-fdsets", |
| .args_type = "", |
| .help = "Return information describing all fd sets", |
| .mhandler.cmd_new = qmp_marshal_input_query_fdsets, |
| }, |
| |
| SQMP |
| query-fdsets |
| ------------- |
| |
| Return information describing all fd sets. |
| |
| Arguments: None |
| |
| Example: |
| |
| -> { "execute": "query-fdsets" } |
| <- { "return": [ |
| { |
| "fds": [ |
| { |
| "fd": 30, |
| "opaque": "rdonly:/path/to/file" |
| }, |
| { |
| "fd": 24, |
| "opaque": "rdwr:/path/to/file" |
| } |
| ], |
| "fdset-id": 1 |
| }, |
| { |
| "fds": [ |
| { |
| "fd": 28 |
| }, |
| { |
| "fd": 29 |
| } |
| ], |
| "fdset-id": 0 |
| } |
| ] |
| } |
| |
| Note: The list of fd sets is shared by all monitor connections. |
| |
| EQMP |
| |
| { |
| .name = "block_passwd", |
| .args_type = "device:B,password:s", |
| .mhandler.cmd_new = qmp_marshal_input_block_passwd, |
| }, |
| |
| SQMP |
| block_passwd |
| ------------ |
| |
| Set the password of encrypted block devices. |
| |
| Arguments: |
| |
| - "device": device name (json-string) |
| - "password": password (json-string) |
| |
| Example: |
| |
| -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0", |
| "password": "12345" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "block_set_io_throttle", |
| .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l", |
| .mhandler.cmd_new = qmp_marshal_input_block_set_io_throttle, |
| }, |
| |
| SQMP |
| block_set_io_throttle |
| ------------ |
| |
| Change I/O throttle limits for a block drive. |
| |
| Arguments: |
| |
| - "device": device name (json-string) |
| - "bps": total throughput limit in bytes per second(json-int) |
| - "bps_rd": read throughput limit in bytes per second(json-int) |
| - "bps_wr": read throughput limit in bytes per second(json-int) |
| - "iops": total I/O operations per second(json-int) |
| - "iops_rd": read I/O operations per second(json-int) |
| - "iops_wr": write I/O operations per second(json-int) |
| |
| Example: |
| |
| -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0", |
| "bps": "1000000", |
| "bps_rd": "0", |
| "bps_wr": "0", |
| "iops": "0", |
| "iops_rd": "0", |
| "iops_wr": "0" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "set_password", |
| .args_type = "protocol:s,password:s,connected:s?", |
| .mhandler.cmd_new = qmp_marshal_input_set_password, |
| }, |
| |
| SQMP |
| set_password |
| ------------ |
| |
| Set the password for vnc/spice protocols. |
| |
| Arguments: |
| |
| - "protocol": protocol name (json-string) |
| - "password": password (json-string) |
| - "connected": [ keep | disconnect | fail ] (josn-string, optional) |
| |
| Example: |
| |
| -> { "execute": "set_password", "arguments": { "protocol": "vnc", |
| "password": "secret" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "expire_password", |
| .args_type = "protocol:s,time:s", |
| .mhandler.cmd_new = qmp_marshal_input_expire_password, |
| }, |
| |
| SQMP |
| expire_password |
| --------------- |
| |
| Set the password expire time for vnc/spice protocols. |
| |
| Arguments: |
| |
| - "protocol": protocol name (json-string) |
| - "time": [ now | never | +secs | secs ] (json-string) |
| |
| Example: |
| |
| -> { "execute": "expire_password", "arguments": { "protocol": "vnc", |
| "time": "+60" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "add_client", |
| .args_type = "protocol:s,fdname:s,skipauth:b?,tls:b?", |
| .mhandler.cmd_new = qmp_marshal_input_add_client, |
| }, |
| |
| SQMP |
| add_client |
| ---------- |
| |
| Add a graphics client |
| |
| Arguments: |
| |
| - "protocol": protocol name (json-string) |
| - "fdname": file descriptor name (json-string) |
| - "skipauth": whether to skip authentication (json-bool, optional) |
| - "tls": whether to perform TLS (json-bool, optional) |
| |
| Example: |
| |
| -> { "execute": "add_client", "arguments": { "protocol": "vnc", |
| "fdname": "myclient" } } |
| <- { "return": {} } |
| |
| EQMP |
| { |
| .name = "qmp_capabilities", |
| .args_type = "", |
| .params = "", |
| .help = "enable QMP capabilities", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_qmp_capabilities, |
| }, |
| |
| SQMP |
| qmp_capabilities |
| ---------------- |
| |
| Enable QMP capabilities. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "qmp_capabilities" } |
| <- { "return": {} } |
| |
| Note: This command must be issued before issuing any other command. |
| |
| EQMP |
| |
| { |
| .name = "human-monitor-command", |
| .args_type = "command-line:s,cpu-index:i?", |
| .mhandler.cmd_new = qmp_marshal_input_human_monitor_command, |
| }, |
| |
| SQMP |
| human-monitor-command |
| --------------------- |
| |
| Execute a Human Monitor command. |
| |
| Arguments: |
| |
| - command-line: the command name and its arguments, just like the |
| Human Monitor's shell (json-string) |
| - cpu-index: select the CPU number to be used by commands which access CPU |
| data, like 'info registers'. The Monitor selects CPU 0 if this |
| argument is not provided (json-int, optional) |
| |
| Example: |
| |
| -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } } |
| <- { "return": "kvm support: enabled\r\n" } |
| |
| Notes: |
| |
| (1) The Human Monitor is NOT an stable interface, this means that command |
| names, arguments and responses can change or be removed at ANY time. |
| Applications that rely on long term stability guarantees should NOT |
| use this command |
| |
| (2) Limitations: |
| |
| o This command is stateless, this means that commands that depend |
| on state information (such as getfd) might not work |
| |
| o Commands that prompt the user for data (eg. 'cont' when the block |
| device is encrypted) don't currently work |
| |
| 3. Query Commands |
| ================= |
| |
| HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change |
| HXCOMM this! We will possibly move query commands definitions inside those |
| HXCOMM sections, just like regular commands. |
| |
| EQMP |
| |
| SQMP |
| query-version |
| ------------- |
| |
| Show QEMU version. |
| |
| Return a json-object with the following information: |
| |
| - "qemu": A json-object containing three integer values: |
| - "major": QEMU's major version (json-int) |
| - "minor": QEMU's minor version (json-int) |
| - "micro": QEMU's micro version (json-int) |
| - "package": package's version (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-version" } |
| <- { |
| "return":{ |
| "qemu":{ |
| "major":0, |
| "minor":11, |
| "micro":5 |
| }, |
| "package":"" |
| } |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-version", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_version, |
| }, |
| |
| SQMP |
| query-commands |
| -------------- |
| |
| List QMP available commands. |
| |
| Each command is represented by a json-object, the returned value is a json-array |
| of all commands. |
| |
| Each json-object contain: |
| |
| - "name": command's name (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-commands" } |
| <- { |
| "return":[ |
| { |
| "name":"query-balloon" |
| }, |
| { |
| "name":"system_powerdown" |
| } |
| ] |
| } |
| |
| Note: This example has been shortened as the real response is too long. |
| |
| EQMP |
| |
| { |
| .name = "query-commands", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_commands, |
| }, |
| |
| SQMP |
| query-events |
| -------------- |
| |
| List QMP available events. |
| |
| Each event is represented by a json-object, the returned value is a json-array |
| of all events. |
| |
| Each json-object contains: |
| |
| - "name": event's name (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-events" } |
| <- { |
| "return":[ |
| { |
| "name":"SHUTDOWN" |
| }, |
| { |
| "name":"RESET" |
| } |
| ] |
| } |
| |
| Note: This example has been shortened as the real response is too long. |
| |
| EQMP |
| |
| { |
| .name = "query-events", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_events, |
| }, |
| |
| SQMP |
| query-chardev |
| ------------- |
| |
| Each device is represented by a json-object. The returned value is a json-array |
| of all devices. |
| |
| Each json-object contain the following: |
| |
| - "label": device's label (json-string) |
| - "filename": device's file (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-chardev" } |
| <- { |
| "return":[ |
| { |
| "label":"monitor", |
| "filename":"stdio" |
| }, |
| { |
| "label":"serial0", |
| "filename":"vc" |
| } |
| ] |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-chardev", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_chardev, |
| }, |
| |
| SQMP |
| query-block |
| ----------- |
| |
| Show the block devices. |
| |
| Each block device information is stored in a json-object and the returned value |
| is a json-array of all devices. |
| |
| Each json-object contain the following: |
| |
| - "device": device name (json-string) |
| - "type": device type (json-string) |
| - deprecated, retained for backward compatibility |
| - Possible values: "unknown" |
| - "removable": true if the device is removable, false otherwise (json-bool) |
| - "locked": true if the device is locked, false otherwise (json-bool) |
| - "tray_open": only present if removable, true if the device has a tray, |
| and it is open (json-bool) |
| - "inserted": only present if the device is inserted, it is a json-object |
| containing the following: |
| - "file": device file name (json-string) |
| - "ro": true if read-only, false otherwise (json-bool) |
| - "drv": driver format name (json-string) |
| - Possible values: "blkdebug", "bochs", "cloop", "cow", "dmg", |
| "file", "file", "ftp", "ftps", "host_cdrom", |
| "host_device", "host_floppy", "http", "https", |
| "nbd", "parallels", "qcow", "qcow2", "raw", |
| "tftp", "vdi", "vmdk", "vpc", "vvfat" |
| - "backing_file": backing file name (json-string, optional) |
| - "backing_file_depth": number of files in the backing file chain (json-int) |
| - "encrypted": true if encrypted, false otherwise (json-bool) |
| - "bps": limit total bytes per second (json-int) |
| - "bps_rd": limit read bytes per second (json-int) |
| - "bps_wr": limit write bytes per second (json-int) |
| - "iops": limit total I/O operations per second (json-int) |
| - "iops_rd": limit read operations per second (json-int) |
| - "iops_wr": limit write operations per second (json-int) |
| |
| - "io-status": I/O operation status, only present if the device supports it |
| and the VM is configured to stop on errors. It's always reset |
| to "ok" when the "cont" command is issued (json_string, optional) |
| - Possible values: "ok", "failed", "nospace" |
| |
| Example: |
| |
| -> { "execute": "query-block" } |
| <- { |
| "return":[ |
| { |
| "io-status": "ok", |
| "device":"ide0-hd0", |
| "locked":false, |
| "removable":false, |
| "inserted":{ |
| "ro":false, |
| "drv":"qcow2", |
| "encrypted":false, |
| "file":"disks/test.img", |
| "backing_file_depth":0, |
| "bps":1000000, |
| "bps_rd":0, |
| "bps_wr":0, |
| "iops":1000000, |
| "iops_rd":0, |
| "iops_wr":0, |
| }, |
| "type":"unknown" |
| }, |
| { |
| "io-status": "ok", |
| "device":"ide1-cd0", |
| "locked":false, |
| "removable":true, |
| "type":"unknown" |
| }, |
| { |
| "device":"floppy0", |
| "locked":false, |
| "removable":true, |
| "type":"unknown" |
| }, |
| { |
| "device":"sd0", |
| "locked":false, |
| "removable":true, |
| "type":"unknown" |
| } |
| ] |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-block", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_block, |
| }, |
| |
| SQMP |
| query-blockstats |
| ---------------- |
| |
| Show block device statistics. |
| |
| Each device statistic information is stored in a json-object and the returned |
| value is a json-array of all devices. |
| |
| Each json-object contain the following: |
| |
| - "device": device name (json-string) |
| - "stats": A json-object with the statistics information, it contains: |
| - "rd_bytes": bytes read (json-int) |
| - "wr_bytes": bytes written (json-int) |
| - "rd_operations": read operations (json-int) |
| - "wr_operations": write operations (json-int) |
| - "flush_operations": cache flush operations (json-int) |
| - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int) |
| - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int) |
| - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int) |
| - "wr_highest_offset": Highest offset of a sector written since the |
| BlockDriverState has been opened (json-int) |
| - "parent": Contains recursively the statistics of the underlying |
| protocol (e.g. the host file for a qcow2 image). If there is |
| no underlying protocol, this field is omitted |
| (json-object, optional) |
| |
| Example: |
| |
| -> { "execute": "query-blockstats" } |
| <- { |
| "return":[ |
| { |
| "device":"ide0-hd0", |
| "parent":{ |
| "stats":{ |
| "wr_highest_offset":3686448128, |
| "wr_bytes":9786368, |
| "wr_operations":751, |
| "rd_bytes":122567168, |
| "rd_operations":36772 |
| "wr_total_times_ns":313253456 |
| "rd_total_times_ns":3465673657 |
| "flush_total_times_ns":49653 |
| "flush_operations":61, |
| } |
| }, |
| "stats":{ |
| "wr_highest_offset":2821110784, |
| "wr_bytes":9786368, |
| "wr_operations":692, |
| "rd_bytes":122739200, |
| "rd_operations":36604 |
| "flush_operations":51, |
| "wr_total_times_ns":313253456 |
| "rd_total_times_ns":3465673657 |
| "flush_total_times_ns":49653 |
| } |
| }, |
| { |
| "device":"ide1-cd0", |
| "stats":{ |
| "wr_highest_offset":0, |
| "wr_bytes":0, |
| "wr_operations":0, |
| "rd_bytes":0, |
| "rd_operations":0 |
| "flush_operations":0, |
| "wr_total_times_ns":0 |
| "rd_total_times_ns":0 |
| "flush_total_times_ns":0 |
| } |
| }, |
| { |
| "device":"floppy0", |
| "stats":{ |
| "wr_highest_offset":0, |
| "wr_bytes":0, |
| "wr_operations":0, |
| "rd_bytes":0, |
| "rd_operations":0 |
| "flush_operations":0, |
| "wr_total_times_ns":0 |
| "rd_total_times_ns":0 |
| "flush_total_times_ns":0 |
| } |
| }, |
| { |
| "device":"sd0", |
| "stats":{ |
| "wr_highest_offset":0, |
| "wr_bytes":0, |
| "wr_operations":0, |
| "rd_bytes":0, |
| "rd_operations":0 |
| "flush_operations":0, |
| "wr_total_times_ns":0 |
| "rd_total_times_ns":0 |
| "flush_total_times_ns":0 |
| } |
| } |
| ] |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-blockstats", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_blockstats, |
| }, |
| |
| SQMP |
| query-cpus |
| ---------- |
| |
| Show CPU information. |
| |
| Return a json-array. Each CPU is represented by a json-object, which contains: |
| |
| - "CPU": CPU index (json-int) |
| - "current": true if this is the current CPU, false otherwise (json-bool) |
| - "halted": true if the cpu is halted, false otherwise (json-bool) |
| - Current program counter. The key's name depends on the architecture: |
| "pc": i386/x86_64 (json-int) |
| "nip": PPC (json-int) |
| "pc" and "npc": sparc (json-int) |
| "PC": mips (json-int) |
| - "thread_id": ID of the underlying host thread (json-int) |
| |
| Example: |
| |
| -> { "execute": "query-cpus" } |
| <- { |
| "return":[ |
| { |
| "CPU":0, |
| "current":true, |
| "halted":false, |
| "pc":3227107138 |
| "thread_id":3134 |
| }, |
| { |
| "CPU":1, |
| "current":false, |
| "halted":true, |
| "pc":7108165 |
| "thread_id":3135 |
| } |
| ] |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-cpus", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_cpus, |
| }, |
| |
| SQMP |
| query-pci |
| --------- |
| |
| PCI buses and devices information. |
| |
| The returned value is a json-array of all buses. Each bus is represented by |
| a json-object, which has a key with a json-array of all PCI devices attached |
| to it. Each device is represented by a json-object. |
| |
| The bus json-object contains the following: |
| |
| - "bus": bus number (json-int) |
| - "devices": a json-array of json-objects, each json-object represents a |
| PCI device |
| |
| The PCI device json-object contains the following: |
| |
| - "bus": identical to the parent's bus number (json-int) |
| - "slot": slot number (json-int) |
| - "function": function number (json-int) |
| - "class_info": a json-object containing: |
| - "desc": device class description (json-string, optional) |
| - "class": device class number (json-int) |
| - "id": a json-object containing: |
| - "device": device ID (json-int) |
| - "vendor": vendor ID (json-int) |
| - "irq": device's IRQ if assigned (json-int, optional) |
| - "qdev_id": qdev id string (json-string) |
| - "pci_bridge": It's a json-object, only present if this device is a |
| PCI bridge, contains: |
| - "bus": bus number (json-int) |
| - "secondary": secondary bus number (json-int) |
| - "subordinate": subordinate bus number (json-int) |
| - "io_range": I/O memory range information, a json-object with the |
| following members: |
| - "base": base address, in bytes (json-int) |
| - "limit": limit address, in bytes (json-int) |
| - "memory_range": memory range information, a json-object with the |
| following members: |
| - "base": base address, in bytes (json-int) |
| - "limit": limit address, in bytes (json-int) |
| - "prefetchable_range": Prefetchable memory range information, a |
| json-object with the following members: |
| - "base": base address, in bytes (json-int) |
| - "limit": limit address, in bytes (json-int) |
| - "devices": a json-array of PCI devices if there's any attached, each |
| each element is represented by a json-object, which contains |
| the same members of the 'PCI device json-object' described |
| above (optional) |
| - "regions": a json-array of json-objects, each json-object represents a |
| memory region of this device |
| |
| The memory range json-object contains the following: |
| |
| - "base": base memory address (json-int) |
| - "limit": limit value (json-int) |
| |
| The region json-object can be an I/O region or a memory region, an I/O region |
| json-object contains the following: |
| |
| - "type": "io" (json-string, fixed) |
| - "bar": BAR number (json-int) |
| - "address": memory address (json-int) |
| - "size": memory size (json-int) |
| |
| A memory region json-object contains the following: |
| |
| - "type": "memory" (json-string, fixed) |
| - "bar": BAR number (json-int) |
| - "address": memory address (json-int) |
| - "size": memory size (json-int) |
| - "mem_type_64": true or false (json-bool) |
| - "prefetch": true or false (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-pci" } |
| <- { |
| "return":[ |
| { |
| "bus":0, |
| "devices":[ |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":0, |
| "class_info":{ |
| "class":1536, |
| "desc":"Host bridge" |
| }, |
| "id":{ |
| "device":32902, |
| "vendor":4663 |
| }, |
| "function":0, |
| "regions":[ |
| |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":1, |
| "class_info":{ |
| "class":1537, |
| "desc":"ISA bridge" |
| }, |
| "id":{ |
| "device":32902, |
| "vendor":28672 |
| }, |
| "function":0, |
| "regions":[ |
| |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":1, |
| "class_info":{ |
| "class":257, |
| "desc":"IDE controller" |
| }, |
| "id":{ |
| "device":32902, |
| "vendor":28688 |
| }, |
| "function":1, |
| "regions":[ |
| { |
| "bar":4, |
| "size":16, |
| "address":49152, |
| "type":"io" |
| } |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":2, |
| "class_info":{ |
| "class":768, |
| "desc":"VGA controller" |
| }, |
| "id":{ |
| "device":4115, |
| "vendor":184 |
| }, |
| "function":0, |
| "regions":[ |
| { |
| "prefetch":true, |
| "mem_type_64":false, |
| "bar":0, |
| "size":33554432, |
| "address":4026531840, |
| "type":"memory" |
| }, |
| { |
| "prefetch":false, |
| "mem_type_64":false, |
| "bar":1, |
| "size":4096, |
| "address":4060086272, |
| "type":"memory" |
| }, |
| { |
| "prefetch":false, |
| "mem_type_64":false, |
| "bar":6, |
| "size":65536, |
| "address":-1, |
| "type":"memory" |
| } |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "irq":11, |
| "slot":4, |
| "class_info":{ |
| "class":1280, |
| "desc":"RAM controller" |
| }, |
| "id":{ |
| "device":6900, |
| "vendor":4098 |
| }, |
| "function":0, |
| "regions":[ |
| { |
| "bar":0, |
| "size":32, |
| "address":49280, |
| "type":"io" |
| } |
| ] |
| } |
| ] |
| } |
| ] |
| } |
| |
| Note: This example has been shortened as the real response is too long. |
| |
| EQMP |
| |
| { |
| .name = "query-pci", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_pci, |
| }, |
| |
| SQMP |
| query-kvm |
| --------- |
| |
| Show KVM information. |
| |
| Return a json-object with the following information: |
| |
| - "enabled": true if KVM support is enabled, false otherwise (json-bool) |
| - "present": true if QEMU has KVM support, false otherwise (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-kvm" } |
| <- { "return": { "enabled": true, "present": true } } |
| |
| EQMP |
| |
| { |
| .name = "query-kvm", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_kvm, |
| }, |
| |
| SQMP |
| query-status |
| ------------ |
| |
| Return a json-object with the following information: |
| |
| - "running": true if the VM is running, or false if it is paused (json-bool) |
| - "singlestep": true if the VM is in single step mode, |
| false otherwise (json-bool) |
| - "status": one of the following values (json-string) |
| "debug" - QEMU is running on a debugger |
| "inmigrate" - guest is paused waiting for an incoming migration |
| "internal-error" - An internal error that prevents further guest |
| execution has occurred |
| "io-error" - the last IOP has failed and the device is configured |
| to pause on I/O errors |
| "paused" - guest has been paused via the 'stop' command |
| "postmigrate" - guest is paused following a successful 'migrate' |
| "prelaunch" - QEMU was started with -S and guest has not started |
| "finish-migrate" - guest is paused to finish the migration process |
| "restore-vm" - guest is paused to restore VM state |
| "running" - guest is actively running |
| "save-vm" - guest is paused to save the VM state |
| "shutdown" - guest is shut down (and -no-shutdown is in use) |
| "watchdog" - the watchdog action is configured to pause and |
| has been triggered |
| |
| Example: |
| |
| -> { "execute": "query-status" } |
| <- { "return": { "running": true, "singlestep": false, "status": "running" } } |
| |
| EQMP |
| |
| { |
| .name = "query-status", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_status, |
| }, |
| |
| SQMP |
| query-mice |
| ---------- |
| |
| Show VM mice information. |
| |
| Each mouse is represented by a json-object, the returned value is a json-array |
| of all mice. |
| |
| The mouse json-object contains the following: |
| |
| - "name": mouse's name (json-string) |
| - "index": mouse's index (json-int) |
| - "current": true if this mouse is receiving events, false otherwise (json-bool) |
| - "absolute": true if the mouse generates absolute input events (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-mice" } |
| <- { |
| "return":[ |
| { |
| "name":"QEMU Microsoft Mouse", |
| "index":0, |
| "current":false, |
| "absolute":false |
| }, |
| { |
| "name":"QEMU PS/2 Mouse", |
| "index":1, |
| "current":true, |
| "absolute":true |
| } |
| ] |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-mice", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_mice, |
| }, |
| |
| SQMP |
| query-vnc |
| --------- |
| |
| Show VNC server information. |
| |
| Return a json-object with server information. Connected clients are returned |
| as a json-array of json-objects. |
| |
| The main json-object contains the following: |
| |
| - "enabled": true or false (json-bool) |
| - "host": server's IP address (json-string) |
| - "family": address family (json-string) |
| - Possible values: "ipv4", "ipv6", "unix", "unknown" |
| - "service": server's port number (json-string) |
| - "auth": authentication method (json-string) |
| - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight", |
| "tls", "ultra", "unknown", "vencrypt", "vencrypt", |
| "vencrypt+plain", "vencrypt+tls+none", |
| "vencrypt+tls+plain", "vencrypt+tls+sasl", |
| "vencrypt+tls+vnc", "vencrypt+x509+none", |
| "vencrypt+x509+plain", "vencrypt+x509+sasl", |
| "vencrypt+x509+vnc", "vnc" |
| - "clients": a json-array of all connected clients |
| |
| Clients are described by a json-object, each one contain the following: |
| |
| - "host": client's IP address (json-string) |
| - "family": address family (json-string) |
| - Possible values: "ipv4", "ipv6", "unix", "unknown" |
| - "service": client's port number (json-string) |
| - "x509_dname": TLS dname (json-string, optional) |
| - "sasl_username": SASL username (json-string, optional) |
| |
| Example: |
| |
| -> { "execute": "query-vnc" } |
| <- { |
| "return":{ |
| "enabled":true, |
| "host":"0.0.0.0", |
| "service":"50402", |
| "auth":"vnc", |
| "family":"ipv4", |
| "clients":[ |
| { |
| "host":"127.0.0.1", |
| "service":"50401", |
| "family":"ipv4" |
| } |
| ] |
| } |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-vnc", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_vnc, |
| }, |
| |
| SQMP |
| query-spice |
| ----------- |
| |
| Show SPICE server information. |
| |
| Return a json-object with server information. Connected clients are returned |
| as a json-array of json-objects. |
| |
| The main json-object contains the following: |
| |
| - "enabled": true or false (json-bool) |
| - "host": server's IP address (json-string) |
| - "port": server's port number (json-int, optional) |
| - "tls-port": server's port number (json-int, optional) |
| - "auth": authentication method (json-string) |
| - Possible values: "none", "spice" |
| - "channels": a json-array of all active channels clients |
| |
| Channels are described by a json-object, each one contain the following: |
| |
| - "host": client's IP address (json-string) |
| - "family": address family (json-string) |
| - Possible values: "ipv4", "ipv6", "unix", "unknown" |
| - "port": client's port number (json-string) |
| - "connection-id": spice connection id. All channels with the same id |
| belong to the same spice session (json-int) |
| - "channel-type": channel type. "1" is the main control channel, filter for |
| this one if you want track spice sessions only (json-int) |
| - "channel-id": channel id. Usually "0", might be different needed when |
| multiple channels of the same type exist, such as multiple |
| display channels in a multihead setup (json-int) |
| - "tls": whevener the channel is encrypted (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-spice" } |
| <- { |
| "return": { |
| "enabled": true, |
| "auth": "spice", |
| "port": 5920, |
| "tls-port": 5921, |
| "host": "0.0.0.0", |
| "channels": [ |
| { |
| "port": "54924", |
| "family": "ipv4", |
| "channel-type": 1, |
| "connection-id": 1804289383, |
| "host": "127.0.0.1", |
| "channel-id": 0, |
| "tls": true |
| }, |
| { |
| "port": "36710", |
| "family": "ipv4", |
| "channel-type": 4, |
| "connection-id": 1804289383, |
| "host": "127.0.0.1", |
| "channel-id": 0, |
| "tls": false |
| }, |
| [ ... more channels follow ... ] |
| ] |
| } |
| } |
| |
| EQMP |
| |
| #if defined(CONFIG_SPICE) |
| { |
| .name = "query-spice", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_spice, |
| }, |
| #endif |
| |
| SQMP |
| query-name |
| ---------- |
| |
| Show VM name. |
| |
| Return a json-object with the following information: |
| |
| - "name": VM's name (json-string, optional) |
| |
| Example: |
| |
| -> { "execute": "query-name" } |
| <- { "return": { "name": "qemu-name" } } |
| |
| EQMP |
| |
| { |
| .name = "query-name", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_name, |
| }, |
| |
| SQMP |
| query-uuid |
| ---------- |
| |
| Show VM UUID. |
| |
| Return a json-object with the following information: |
| |
| - "UUID": Universally Unique Identifier (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-uuid" } |
| <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } |
| |
| EQMP |
| |
| { |
| .name = "query-uuid", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_uuid, |
| }, |
| |
| SQMP |
| query-migrate |
| ------------- |
| |
| Migration status. |
| |
| Return a json-object. If migration is active there will be another json-object |
| with RAM migration status and if block migration is active another one with |
| block migration status. |
| |
| The main json-object contains the following: |
| |
| - "status": migration status (json-string) |
| - Possible values: "active", "completed", "failed", "cancelled" |
| - "total-time": total amount of ms since migration started. If |
| migration has ended, it returns the total migration |
| time (json-int) |
| - "downtime": only present when migration has finished correctly |
| total amount in ms for downtime that happened (json-int) |
| - "expected-downtime": only present while migration is active |
| total amount in ms for downtime that was calculated on |
| the last bitmap round (json-int) |
| - "ram": only present if "status" is "active", it is a json-object with the |
| following RAM information (in bytes): |
| - "transferred": amount transferred (json-int) |
| - "remaining": amount remaining (json-int) |
| - "total": total (json-int) |
| - "duplicate": number of duplicated pages (json-int) |
| - "normal" : number of normal pages transferred (json-int) |
| - "normal-bytes" : number of normal bytes transferred (json-int) |
| - "disk": only present if "status" is "active" and it is a block migration, |
| it is a json-object with the following disk information (in bytes): |
| - "transferred": amount transferred (json-int) |
| - "remaining": amount remaining (json-int) |
| - "total": total (json-int) |
| - "xbzrle-cache": only present if XBZRLE is active. |
| It is a json-object with the following XBZRLE information: |
| - "cache-size": XBZRLE cache size |
| - "bytes": total XBZRLE bytes transferred |
| - "pages": number of XBZRLE compressed pages |
| - "cache-miss": number of cache misses |
| - "overflow": number of XBZRLE overflows |
| Examples: |
| |
| 1. Before the first migration |
| |
| -> { "execute": "query-migrate" } |
| <- { "return": {} } |
| |
| 2. Migration is done and has succeeded |
| |
| -> { "execute": "query-migrate" } |
| <- { "return": { |
| "status": "completed", |
| "ram":{ |
| "transferred":123, |
| "remaining":123, |
| "total":246, |
| "total-time":12345, |
| "downtime":12345, |
| "duplicate":123, |
| "normal":123, |
| "normal-bytes":123456 |
| } |
| } |
| } |
| |
| 3. Migration is done and has failed |
| |
| -> { "execute": "query-migrate" } |
| <- { "return": { "status": "failed" } } |
| |
| 4. Migration is being performed and is not a block migration: |
| |
| -> { "execute": "query-migrate" } |
| <- { |
| "return":{ |
| "status":"active", |
| "ram":{ |
| "transferred":123, |
| "remaining":123, |
| "total":246, |
| "total-time":12345, |
| "expected-downtime":12345, |
| "duplicate":123, |
| "normal":123, |
| "normal-bytes":123456 |
| } |
| } |
| } |
| |
| 5. Migration is being performed and is a block migration: |
| |
| -> { "execute": "query-migrate" } |
| <- { |
| "return":{ |
| "status":"active", |
| "ram":{ |
| "total":1057024, |
| "remaining":1053304, |
| "transferred":3720, |
| "total-time":12345, |
| "expected-downtime":12345, |
| "duplicate":123, |
| "normal":123, |
| "normal-bytes":123456 |
| }, |
| "disk":{ |
| "total":20971520, |
| "remaining":20880384, |
| "transferred":91136 |
| } |
| } |
| } |
| |
| 6. Migration is being performed and XBZRLE is active: |
| |
| -> { "execute": "query-migrate" } |
| <- { |
| "return":{ |
| "status":"active", |
| "capabilities" : [ { "capability": "xbzrle", "state" : true } ], |
| "ram":{ |
| "total":1057024, |
| "remaining":1053304, |
| "transferred":3720, |
| "total-time":12345, |
| "expected-downtime":12345, |
| "duplicate":10, |
| "normal":3333, |
| "normal-bytes":3412992 |
| }, |
| "xbzrle-cache":{ |
| "cache-size":67108864, |
| "bytes":20971520, |
| "pages":2444343, |
| "cache-miss":2244, |
| "overflow":34434 |
| } |
| } |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-migrate", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_migrate, |
| }, |
| |
| SQMP |
| migrate-set-capabilities |
| ------- |
| |
| Enable/Disable migration capabilities |
| |
| - "xbzrle": xbzrle support |
| |
| Arguments: |
| |
| Example: |
| |
| -> { "execute": "migrate-set-capabilities" , "arguments": |
| { "capabilities": [ { "capability": "xbzrle", "state": true } ] } } |
| |
| EQMP |
| |
| { |
| .name = "migrate-set-capabilities", |
| .args_type = "capabilities:O", |
| .params = "capability:s,state:b", |
| .mhandler.cmd_new = qmp_marshal_input_migrate_set_capabilities, |
| }, |
| SQMP |
| query-migrate-capabilities |
| ------- |
| |
| Query current migration capabilities |
| |
| - "capabilities": migration capabilities state |
| - "xbzrle" : XBZRLE state (json-bool) |
| |
| Arguments: |
| |
| Example: |
| |
| -> { "execute": "query-migrate-capabilities" } |
| <- { "return": [ { "state": false, "capability": "xbzrle" } ] } |
| |
| EQMP |
| |
| { |
| .name = "query-migrate-capabilities", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_migrate_capabilities, |
| }, |
| |
| SQMP |
| query-balloon |
| ------------- |
| |
| Show balloon information. |
| |
| Make an asynchronous request for balloon info. When the request completes a |
| json-object will be returned containing the following data: |
| |
| - "actual": current balloon value in bytes (json-int) |
| |
| Example: |
| |
| -> { "execute": "query-balloon" } |
| <- { |
| "return":{ |
| "actual":1073741824, |
| } |
| } |
| |
| EQMP |
| |
| { |
| .name = "query-balloon", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_balloon, |
| }, |
| |
| { |
| .name = "query-block-jobs", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_block_jobs, |
| }, |
| |
| { |
| .name = "qom-list", |
| .args_type = "path:s", |
| .mhandler.cmd_new = qmp_marshal_input_qom_list, |
| }, |
| |
| { |
| .name = "qom-set", |
| .args_type = "path:s,property:s,value:q", |
| .mhandler.cmd_new = qmp_qom_set, |
| }, |
| |
| { |
| .name = "qom-get", |
| .args_type = "path:s,property:s", |
| .mhandler.cmd_new = qmp_qom_get, |
| }, |
| |
| { |
| .name = "nbd-server-start", |
| .args_type = "addr:q", |
| .mhandler.cmd_new = qmp_marshal_input_nbd_server_start, |
| }, |
| { |
| .name = "nbd-server-add", |
| .args_type = "device:B,writable:b?", |
| .mhandler.cmd_new = qmp_marshal_input_nbd_server_add, |
| }, |
| { |
| .name = "nbd-server-stop", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_nbd_server_stop, |
| }, |
| |
| { |
| .name = "change-vnc-password", |
| .args_type = "password:s", |
| .mhandler.cmd_new = qmp_marshal_input_change_vnc_password, |
| }, |
| { |
| .name = "qom-list-types", |
| .args_type = "implements:s?,abstract:b?", |
| .mhandler.cmd_new = qmp_marshal_input_qom_list_types, |
| }, |
| |
| { |
| .name = "device-list-properties", |
| .args_type = "typename:s", |
| .mhandler.cmd_new = qmp_marshal_input_device_list_properties, |
| }, |
| |
| { |
| .name = "query-machines", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_machines, |
| }, |
| |
| { |
| .name = "query-cpu-definitions", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_cpu_definitions, |
| }, |
| |
| { |
| .name = "query-target", |
| .args_type = "", |
| .mhandler.cmd_new = qmp_marshal_input_query_target, |
| }, |
| |
| { |
| .name = "chardev-add", |
| .args_type = "id:s,backend:q", |
| .mhandler.cmd_new = qmp_marshal_input_chardev_add, |
| }, |
| |
| SQMP |
| chardev-add |
| ---------------- |
| |
| Add a chardev. |
| |
| Arguments: |
| |
| - "id": the chardev's ID, must be unique (json-string) |
| - "backend": chardev backend type + parameters |
| |
| Examples: |
| |
| -> { "execute" : "chardev-add", |
| "arguments" : { "id" : "foo", |
| "backend" : { "type" : "null", "data" : {} } } } |
| <- { "return": {} } |
| |
| -> { "execute" : "chardev-add", |
| "arguments" : { "id" : "bar", |
| "backend" : { "type" : "file", |
| "data" : { "out" : "/tmp/bar.log" } } } } |
| <- { "return": {} } |
| |
| -> { "execute" : "chardev-add", |
| "arguments" : { "id" : "baz", |
| "backend" : { "type" : "pty", "data" : {} } } } |
| <- { "return": { "pty" : "/dev/pty/42" } } |
| |
| EQMP |
| |
| { |
| .name = "chardev-remove", |
| .args_type = "id:s", |
| .mhandler.cmd_new = qmp_marshal_input_chardev_remove, |
| }, |
| |
| |
| SQMP |
| chardev-remove |
| -------------- |
| |
| Remove a chardev. |
| |
| Arguments: |
| |
| - "id": the chardev's ID, must exist and not be in use (json-string) |
| |
| Example: |
| |
| -> { "execute": "chardev-remove", "arguments": { "id" : "foo" } } |
| <- { "return": {} } |
| |
| EQMP |