| /* |
| * QEMU PC keyboard emulation |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qemu/timer.h" |
| #include "qapi/error.h" |
| #include "hw/isa/isa.h" |
| #include "migration/vmstate.h" |
| #include "hw/acpi/acpi_aml_interface.h" |
| #include "hw/input/ps2.h" |
| #include "hw/irq.h" |
| #include "hw/input/i8042.h" |
| #include "hw/qdev-properties.h" |
| #include "sysemu/reset.h" |
| #include "sysemu/runstate.h" |
| |
| #include "trace.h" |
| |
| /* Keyboard Controller Commands */ |
| |
| /* Read mode bits */ |
| #define KBD_CCMD_READ_MODE 0x20 |
| /* Write mode bits */ |
| #define KBD_CCMD_WRITE_MODE 0x60 |
| /* Get controller version */ |
| #define KBD_CCMD_GET_VERSION 0xA1 |
| /* Disable mouse interface */ |
| #define KBD_CCMD_MOUSE_DISABLE 0xA7 |
| /* Enable mouse interface */ |
| #define KBD_CCMD_MOUSE_ENABLE 0xA8 |
| /* Mouse interface test */ |
| #define KBD_CCMD_TEST_MOUSE 0xA9 |
| /* Controller self test */ |
| #define KBD_CCMD_SELF_TEST 0xAA |
| /* Keyboard interface test */ |
| #define KBD_CCMD_KBD_TEST 0xAB |
| /* Keyboard interface disable */ |
| #define KBD_CCMD_KBD_DISABLE 0xAD |
| /* Keyboard interface enable */ |
| #define KBD_CCMD_KBD_ENABLE 0xAE |
| /* read input port */ |
| #define KBD_CCMD_READ_INPORT 0xC0 |
| /* read output port */ |
| #define KBD_CCMD_READ_OUTPORT 0xD0 |
| /* write output port */ |
| #define KBD_CCMD_WRITE_OUTPORT 0xD1 |
| #define KBD_CCMD_WRITE_OBUF 0xD2 |
| /* Write to output buffer as if initiated by the auxiliary device */ |
| #define KBD_CCMD_WRITE_AUX_OBUF 0xD3 |
| /* Write the following byte to the mouse */ |
| #define KBD_CCMD_WRITE_MOUSE 0xD4 |
| /* HP vectra only ? */ |
| #define KBD_CCMD_DISABLE_A20 0xDD |
| /* HP vectra only ? */ |
| #define KBD_CCMD_ENABLE_A20 0xDF |
| /* Pulse bits 3-0 of the output port P2. */ |
| #define KBD_CCMD_PULSE_BITS_3_0 0xF0 |
| /* Pulse bit 0 of the output port P2 = CPU reset. */ |
| #define KBD_CCMD_RESET 0xFE |
| /* Pulse no bits of the output port P2. */ |
| #define KBD_CCMD_NO_OP 0xFF |
| |
| /* Status Register Bits */ |
| |
| /* Keyboard output buffer full */ |
| #define KBD_STAT_OBF 0x01 |
| /* Keyboard input buffer full */ |
| #define KBD_STAT_IBF 0x02 |
| /* Self test successful */ |
| #define KBD_STAT_SELFTEST 0x04 |
| /* Last write was a command write (0=data) */ |
| #define KBD_STAT_CMD 0x08 |
| /* Zero if keyboard locked */ |
| #define KBD_STAT_UNLOCKED 0x10 |
| /* Mouse output buffer full */ |
| #define KBD_STAT_MOUSE_OBF 0x20 |
| /* General receive/xmit timeout */ |
| #define KBD_STAT_GTO 0x40 |
| /* Parity error */ |
| #define KBD_STAT_PERR 0x80 |
| |
| /* Controller Mode Register Bits */ |
| |
| /* Keyboard data generate IRQ1 */ |
| #define KBD_MODE_KBD_INT 0x01 |
| /* Mouse data generate IRQ12 */ |
| #define KBD_MODE_MOUSE_INT 0x02 |
| /* The system flag (?) */ |
| #define KBD_MODE_SYS 0x04 |
| /* The keylock doesn't affect the keyboard if set */ |
| #define KBD_MODE_NO_KEYLOCK 0x08 |
| /* Disable keyboard interface */ |
| #define KBD_MODE_DISABLE_KBD 0x10 |
| /* Disable mouse interface */ |
| #define KBD_MODE_DISABLE_MOUSE 0x20 |
| /* Scan code conversion to PC format */ |
| #define KBD_MODE_KCC 0x40 |
| #define KBD_MODE_RFU 0x80 |
| |
| /* Output Port Bits */ |
| #define KBD_OUT_RESET 0x01 /* 1=normal mode, 0=reset */ |
| #define KBD_OUT_A20 0x02 /* x86 only */ |
| #define KBD_OUT_OBF 0x10 /* Keyboard output buffer full */ |
| #define KBD_OUT_MOUSE_OBF 0x20 /* Mouse output buffer full */ |
| |
| /* |
| * OSes typically write 0xdd/0xdf to turn the A20 line off and on. |
| * We make the default value of the outport include these four bits, |
| * so that the subsection is rarely necessary. |
| */ |
| #define KBD_OUT_ONES 0xcc |
| |
| #define KBD_PENDING_KBD_COMPAT 0x01 |
| #define KBD_PENDING_AUX_COMPAT 0x02 |
| #define KBD_PENDING_CTRL_KBD 0x04 |
| #define KBD_PENDING_CTRL_AUX 0x08 |
| #define KBD_PENDING_KBD KBD_MODE_DISABLE_KBD /* 0x10 */ |
| #define KBD_PENDING_AUX KBD_MODE_DISABLE_MOUSE /* 0x20 */ |
| |
| #define KBD_MIGR_TIMER_PENDING 0x1 |
| |
| #define KBD_OBSRC_KBD 0x01 |
| #define KBD_OBSRC_MOUSE 0x02 |
| #define KBD_OBSRC_CTRL 0x04 |
| |
| |
| /* |
| * XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be |
| * incorrect, but it avoids having to simulate exact delays |
| */ |
| static void kbd_update_irq_lines(KBDState *s) |
| { |
| int irq_kbd_level, irq_mouse_level; |
| |
| irq_kbd_level = 0; |
| irq_mouse_level = 0; |
| |
| if (s->status & KBD_STAT_OBF) { |
| if (s->status & KBD_STAT_MOUSE_OBF) { |
| if (s->mode & KBD_MODE_MOUSE_INT) { |
| irq_mouse_level = 1; |
| } |
| } else { |
| if ((s->mode & KBD_MODE_KBD_INT) && |
| !(s->mode & KBD_MODE_DISABLE_KBD)) { |
| irq_kbd_level = 1; |
| } |
| } |
| } |
| qemu_set_irq(s->irqs[I8042_KBD_IRQ], irq_kbd_level); |
| qemu_set_irq(s->irqs[I8042_MOUSE_IRQ], irq_mouse_level); |
| } |
| |
| static void kbd_deassert_irq(KBDState *s) |
| { |
| s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF); |
| s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF); |
| kbd_update_irq_lines(s); |
| } |
| |
| static uint8_t kbd_pending(KBDState *s) |
| { |
| if (s->extended_state) { |
| return s->pending & (~s->mode | ~(KBD_PENDING_KBD | KBD_PENDING_AUX)); |
| } else { |
| return s->pending; |
| } |
| } |
| |
| /* update irq and KBD_STAT_[MOUSE_]OBF */ |
| static void kbd_update_irq(KBDState *s) |
| { |
| uint8_t pending = kbd_pending(s); |
| |
| s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF); |
| s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF); |
| if (pending) { |
| s->status |= KBD_STAT_OBF; |
| s->outport |= KBD_OUT_OBF; |
| if (pending & KBD_PENDING_CTRL_KBD) { |
| s->obsrc = KBD_OBSRC_CTRL; |
| } else if (pending & KBD_PENDING_CTRL_AUX) { |
| s->status |= KBD_STAT_MOUSE_OBF; |
| s->outport |= KBD_OUT_MOUSE_OBF; |
| s->obsrc = KBD_OBSRC_CTRL; |
| } else if (pending & KBD_PENDING_KBD) { |
| s->obsrc = KBD_OBSRC_KBD; |
| } else { |
| s->status |= KBD_STAT_MOUSE_OBF; |
| s->outport |= KBD_OUT_MOUSE_OBF; |
| s->obsrc = KBD_OBSRC_MOUSE; |
| } |
| } |
| kbd_update_irq_lines(s); |
| } |
| |
| static void kbd_safe_update_irq(KBDState *s) |
| { |
| /* |
| * with KBD_STAT_OBF set, a call to kbd_read_data() will eventually call |
| * kbd_update_irq() |
| */ |
| if (s->status & KBD_STAT_OBF) { |
| return; |
| } |
| /* the throttle timer is pending and will call kbd_update_irq() */ |
| if (s->throttle_timer && timer_pending(s->throttle_timer)) { |
| return; |
| } |
| if (kbd_pending(s)) { |
| kbd_update_irq(s); |
| } |
| } |
| |
| static void kbd_update_kbd_irq(void *opaque, int level) |
| { |
| KBDState *s = opaque; |
| |
| if (level) { |
| s->pending |= KBD_PENDING_KBD; |
| } else { |
| s->pending &= ~KBD_PENDING_KBD; |
| } |
| kbd_safe_update_irq(s); |
| } |
| |
| static void kbd_update_aux_irq(void *opaque, int level) |
| { |
| KBDState *s = opaque; |
| |
| if (level) { |
| s->pending |= KBD_PENDING_AUX; |
| } else { |
| s->pending &= ~KBD_PENDING_AUX; |
| } |
| kbd_safe_update_irq(s); |
| } |
| |
| static void kbd_throttle_timeout(void *opaque) |
| { |
| KBDState *s = opaque; |
| |
| if (kbd_pending(s)) { |
| kbd_update_irq(s); |
| } |
| } |
| |
| static uint64_t kbd_read_status(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| KBDState *s = opaque; |
| int val; |
| val = s->status; |
| trace_pckbd_kbd_read_status(val); |
| return val; |
| } |
| |
| static void kbd_queue(KBDState *s, int b, int aux) |
| { |
| if (s->extended_state) { |
| s->cbdata = b; |
| s->pending &= ~KBD_PENDING_CTRL_KBD & ~KBD_PENDING_CTRL_AUX; |
| s->pending |= aux ? KBD_PENDING_CTRL_AUX : KBD_PENDING_CTRL_KBD; |
| kbd_safe_update_irq(s); |
| } else { |
| ps2_queue(aux ? PS2_DEVICE(&s->ps2mouse) : PS2_DEVICE(&s->ps2kbd), b); |
| } |
| } |
| |
| static uint8_t kbd_dequeue(KBDState *s) |
| { |
| uint8_t b = s->cbdata; |
| |
| s->pending &= ~KBD_PENDING_CTRL_KBD & ~KBD_PENDING_CTRL_AUX; |
| if (kbd_pending(s)) { |
| kbd_update_irq(s); |
| } |
| return b; |
| } |
| |
| static void outport_write(KBDState *s, uint32_t val) |
| { |
| trace_pckbd_outport_write(val); |
| s->outport = val; |
| qemu_set_irq(s->a20_out, (val >> 1) & 1); |
| if (!(val & 1)) { |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| } |
| } |
| |
| static void kbd_write_command(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| KBDState *s = opaque; |
| |
| trace_pckbd_kbd_write_command(val); |
| |
| /* |
| * Bits 3-0 of the output port P2 of the keyboard controller may be pulsed |
| * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE |
| * command specify the output port bits to be pulsed. |
| * 0: Bit should be pulsed. 1: Bit should not be modified. |
| * The only useful version of this command is pulsing bit 0, |
| * which does a CPU reset. |
| */ |
| if ((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) { |
| if (!(val & 1)) { |
| val = KBD_CCMD_RESET; |
| } else { |
| val = KBD_CCMD_NO_OP; |
| } |
| } |
| |
| switch (val) { |
| case KBD_CCMD_READ_MODE: |
| kbd_queue(s, s->mode, 0); |
| break; |
| case KBD_CCMD_WRITE_MODE: |
| case KBD_CCMD_WRITE_OBUF: |
| case KBD_CCMD_WRITE_AUX_OBUF: |
| case KBD_CCMD_WRITE_MOUSE: |
| case KBD_CCMD_WRITE_OUTPORT: |
| s->write_cmd = val; |
| break; |
| case KBD_CCMD_MOUSE_DISABLE: |
| s->mode |= KBD_MODE_DISABLE_MOUSE; |
| break; |
| case KBD_CCMD_MOUSE_ENABLE: |
| s->mode &= ~KBD_MODE_DISABLE_MOUSE; |
| kbd_safe_update_irq(s); |
| break; |
| case KBD_CCMD_TEST_MOUSE: |
| kbd_queue(s, 0x00, 0); |
| break; |
| case KBD_CCMD_SELF_TEST: |
| s->status |= KBD_STAT_SELFTEST; |
| kbd_queue(s, 0x55, 0); |
| break; |
| case KBD_CCMD_KBD_TEST: |
| kbd_queue(s, 0x00, 0); |
| break; |
| case KBD_CCMD_KBD_DISABLE: |
| s->mode |= KBD_MODE_DISABLE_KBD; |
| break; |
| case KBD_CCMD_KBD_ENABLE: |
| s->mode &= ~KBD_MODE_DISABLE_KBD; |
| kbd_safe_update_irq(s); |
| break; |
| case KBD_CCMD_READ_INPORT: |
| kbd_queue(s, 0x80, 0); |
| break; |
| case KBD_CCMD_READ_OUTPORT: |
| kbd_queue(s, s->outport, 0); |
| break; |
| case KBD_CCMD_ENABLE_A20: |
| qemu_irq_raise(s->a20_out); |
| s->outport |= KBD_OUT_A20; |
| break; |
| case KBD_CCMD_DISABLE_A20: |
| qemu_irq_lower(s->a20_out); |
| s->outport &= ~KBD_OUT_A20; |
| break; |
| case KBD_CCMD_RESET: |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| break; |
| case KBD_CCMD_NO_OP: |
| /* ignore that */ |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "unsupported keyboard cmd=0x%02" PRIx64 "\n", val); |
| break; |
| } |
| } |
| |
| static uint64_t kbd_read_data(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| KBDState *s = opaque; |
| |
| if (s->status & KBD_STAT_OBF) { |
| kbd_deassert_irq(s); |
| if (s->obsrc & KBD_OBSRC_KBD) { |
| if (s->throttle_timer) { |
| timer_mod(s->throttle_timer, |
| qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + 1000); |
| } |
| s->obdata = ps2_read_data(PS2_DEVICE(&s->ps2kbd)); |
| } else if (s->obsrc & KBD_OBSRC_MOUSE) { |
| s->obdata = ps2_read_data(PS2_DEVICE(&s->ps2mouse)); |
| } else if (s->obsrc & KBD_OBSRC_CTRL) { |
| s->obdata = kbd_dequeue(s); |
| } |
| } |
| |
| trace_pckbd_kbd_read_data(s->obdata); |
| return s->obdata; |
| } |
| |
| static void kbd_write_data(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| KBDState *s = opaque; |
| |
| trace_pckbd_kbd_write_data(val); |
| |
| switch (s->write_cmd) { |
| case 0: |
| ps2_write_keyboard(&s->ps2kbd, val); |
| /* sending data to the keyboard reenables PS/2 communication */ |
| s->mode &= ~KBD_MODE_DISABLE_KBD; |
| kbd_safe_update_irq(s); |
| break; |
| case KBD_CCMD_WRITE_MODE: |
| s->mode = val; |
| ps2_keyboard_set_translation(&s->ps2kbd, |
| (s->mode & KBD_MODE_KCC) != 0); |
| /* |
| * a write to the mode byte interrupt enable flags directly updates |
| * the irq lines |
| */ |
| kbd_update_irq_lines(s); |
| /* |
| * a write to the mode byte disable interface flags may raise |
| * an irq if there is pending data in the PS/2 queues. |
| */ |
| kbd_safe_update_irq(s); |
| break; |
| case KBD_CCMD_WRITE_OBUF: |
| kbd_queue(s, val, 0); |
| break; |
| case KBD_CCMD_WRITE_AUX_OBUF: |
| kbd_queue(s, val, 1); |
| break; |
| case KBD_CCMD_WRITE_OUTPORT: |
| outport_write(s, val); |
| break; |
| case KBD_CCMD_WRITE_MOUSE: |
| ps2_write_mouse(&s->ps2mouse, val); |
| /* sending data to the mouse reenables PS/2 communication */ |
| s->mode &= ~KBD_MODE_DISABLE_MOUSE; |
| kbd_safe_update_irq(s); |
| break; |
| default: |
| break; |
| } |
| s->write_cmd = 0; |
| } |
| |
| static void kbd_reset(void *opaque) |
| { |
| KBDState *s = opaque; |
| |
| s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT; |
| s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED; |
| s->outport = KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES; |
| s->pending = 0; |
| kbd_deassert_irq(s); |
| if (s->throttle_timer) { |
| timer_del(s->throttle_timer); |
| } |
| } |
| |
| static uint8_t kbd_outport_default(KBDState *s) |
| { |
| return KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES |
| | (s->status & KBD_STAT_OBF ? KBD_OUT_OBF : 0) |
| | (s->status & KBD_STAT_MOUSE_OBF ? KBD_OUT_MOUSE_OBF : 0); |
| } |
| |
| static int kbd_outport_post_load(void *opaque, int version_id) |
| { |
| KBDState *s = opaque; |
| s->outport_present = true; |
| return 0; |
| } |
| |
| static bool kbd_outport_needed(void *opaque) |
| { |
| KBDState *s = opaque; |
| return s->outport != kbd_outport_default(s); |
| } |
| |
| static const VMStateDescription vmstate_kbd_outport = { |
| .name = "pckbd_outport", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .post_load = kbd_outport_post_load, |
| .needed = kbd_outport_needed, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT8(outport, KBDState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static int kbd_extended_state_pre_save(void *opaque) |
| { |
| KBDState *s = opaque; |
| |
| s->migration_flags = 0; |
| if (s->throttle_timer && timer_pending(s->throttle_timer)) { |
| s->migration_flags |= KBD_MIGR_TIMER_PENDING; |
| } |
| |
| return 0; |
| } |
| |
| static int kbd_extended_state_post_load(void *opaque, int version_id) |
| { |
| KBDState *s = opaque; |
| |
| if (s->migration_flags & KBD_MIGR_TIMER_PENDING) { |
| kbd_throttle_timeout(s); |
| } |
| s->extended_state_loaded = true; |
| |
| return 0; |
| } |
| |
| static bool kbd_extended_state_needed(void *opaque) |
| { |
| KBDState *s = opaque; |
| |
| return s->extended_state; |
| } |
| |
| static const VMStateDescription vmstate_kbd_extended_state = { |
| .name = "pckbd/extended_state", |
| .post_load = kbd_extended_state_post_load, |
| .pre_save = kbd_extended_state_pre_save, |
| .needed = kbd_extended_state_needed, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32(migration_flags, KBDState), |
| VMSTATE_UINT32(obsrc, KBDState), |
| VMSTATE_UINT8(obdata, KBDState), |
| VMSTATE_UINT8(cbdata, KBDState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static int kbd_pre_save(void *opaque) |
| { |
| KBDState *s = opaque; |
| |
| if (s->extended_state) { |
| s->pending_tmp = s->pending; |
| } else { |
| s->pending_tmp = 0; |
| if (s->pending & KBD_PENDING_KBD) { |
| s->pending_tmp |= KBD_PENDING_KBD_COMPAT; |
| } |
| if (s->pending & KBD_PENDING_AUX) { |
| s->pending_tmp |= KBD_PENDING_AUX_COMPAT; |
| } |
| } |
| return 0; |
| } |
| |
| static int kbd_pre_load(void *opaque) |
| { |
| KBDState *s = opaque; |
| |
| s->outport_present = false; |
| s->extended_state_loaded = false; |
| return 0; |
| } |
| |
| static int kbd_post_load(void *opaque, int version_id) |
| { |
| KBDState *s = opaque; |
| if (!s->outport_present) { |
| s->outport = kbd_outport_default(s); |
| } |
| s->pending = s->pending_tmp; |
| if (!s->extended_state_loaded) { |
| s->obsrc = s->status & KBD_STAT_OBF ? |
| (s->status & KBD_STAT_MOUSE_OBF ? KBD_OBSRC_MOUSE : KBD_OBSRC_KBD) : |
| 0; |
| if (s->pending & KBD_PENDING_KBD_COMPAT) { |
| s->pending |= KBD_PENDING_KBD; |
| } |
| if (s->pending & KBD_PENDING_AUX_COMPAT) { |
| s->pending |= KBD_PENDING_AUX; |
| } |
| } |
| /* clear all unused flags */ |
| s->pending &= KBD_PENDING_CTRL_KBD | KBD_PENDING_CTRL_AUX | |
| KBD_PENDING_KBD | KBD_PENDING_AUX; |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_kbd = { |
| .name = "pckbd", |
| .version_id = 3, |
| .minimum_version_id = 3, |
| .pre_load = kbd_pre_load, |
| .post_load = kbd_post_load, |
| .pre_save = kbd_pre_save, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT8(write_cmd, KBDState), |
| VMSTATE_UINT8(status, KBDState), |
| VMSTATE_UINT8(mode, KBDState), |
| VMSTATE_UINT8(pending_tmp, KBDState), |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (const VMStateDescription * const []) { |
| &vmstate_kbd_outport, |
| &vmstate_kbd_extended_state, |
| NULL |
| } |
| }; |
| |
| /* Memory mapped interface */ |
| static uint64_t kbd_mm_readfn(void *opaque, hwaddr addr, unsigned size) |
| { |
| KBDState *s = opaque; |
| |
| if (addr & s->mask) { |
| return kbd_read_status(s, 0, 1) & 0xff; |
| } else { |
| return kbd_read_data(s, 0, 1) & 0xff; |
| } |
| } |
| |
| static void kbd_mm_writefn(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| KBDState *s = opaque; |
| |
| if (addr & s->mask) { |
| kbd_write_command(s, 0, value & 0xff, 1); |
| } else { |
| kbd_write_data(s, 0, value & 0xff, 1); |
| } |
| } |
| |
| |
| static const MemoryRegionOps i8042_mmio_ops = { |
| .read = kbd_mm_readfn, |
| .write = kbd_mm_writefn, |
| .valid.min_access_size = 1, |
| .valid.max_access_size = 4, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void i8042_mmio_set_kbd_irq(void *opaque, int n, int level) |
| { |
| MMIOKBDState *s = I8042_MMIO(opaque); |
| KBDState *ks = &s->kbd; |
| |
| kbd_update_kbd_irq(ks, level); |
| } |
| |
| static void i8042_mmio_set_mouse_irq(void *opaque, int n, int level) |
| { |
| MMIOKBDState *s = I8042_MMIO(opaque); |
| KBDState *ks = &s->kbd; |
| |
| kbd_update_aux_irq(ks, level); |
| } |
| |
| static void i8042_mmio_reset(DeviceState *dev) |
| { |
| MMIOKBDState *s = I8042_MMIO(dev); |
| KBDState *ks = &s->kbd; |
| |
| kbd_reset(ks); |
| } |
| |
| static void i8042_mmio_realize(DeviceState *dev, Error **errp) |
| { |
| MMIOKBDState *s = I8042_MMIO(dev); |
| KBDState *ks = &s->kbd; |
| |
| memory_region_init_io(&s->region, OBJECT(dev), &i8042_mmio_ops, ks, |
| "i8042", s->size); |
| |
| sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->region); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&ks->ps2kbd), errp)) { |
| return; |
| } |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&ks->ps2mouse), errp)) { |
| return; |
| } |
| |
| qdev_connect_gpio_out(DEVICE(&ks->ps2kbd), PS2_DEVICE_IRQ, |
| qdev_get_gpio_in_named(dev, "ps2-kbd-input-irq", |
| 0)); |
| |
| qdev_connect_gpio_out(DEVICE(&ks->ps2mouse), PS2_DEVICE_IRQ, |
| qdev_get_gpio_in_named(dev, "ps2-mouse-input-irq", |
| 0)); |
| } |
| |
| static void i8042_mmio_init(Object *obj) |
| { |
| MMIOKBDState *s = I8042_MMIO(obj); |
| KBDState *ks = &s->kbd; |
| |
| ks->extended_state = true; |
| |
| object_initialize_child(obj, "ps2kbd", &ks->ps2kbd, TYPE_PS2_KBD_DEVICE); |
| object_initialize_child(obj, "ps2mouse", &ks->ps2mouse, |
| TYPE_PS2_MOUSE_DEVICE); |
| |
| qdev_init_gpio_out(DEVICE(obj), ks->irqs, 2); |
| qdev_init_gpio_in_named(DEVICE(obj), i8042_mmio_set_kbd_irq, |
| "ps2-kbd-input-irq", 1); |
| qdev_init_gpio_in_named(DEVICE(obj), i8042_mmio_set_mouse_irq, |
| "ps2-mouse-input-irq", 1); |
| } |
| |
| static Property i8042_mmio_properties[] = { |
| DEFINE_PROP_UINT64("mask", MMIOKBDState, kbd.mask, UINT64_MAX), |
| DEFINE_PROP_UINT32("size", MMIOKBDState, size, -1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static const VMStateDescription vmstate_kbd_mmio = { |
| .name = "pckbd-mmio", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_STRUCT(kbd, MMIOKBDState, 0, vmstate_kbd, KBDState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void i8042_mmio_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = i8042_mmio_realize; |
| dc->reset = i8042_mmio_reset; |
| dc->vmsd = &vmstate_kbd_mmio; |
| device_class_set_props(dc, i8042_mmio_properties); |
| set_bit(DEVICE_CATEGORY_INPUT, dc->categories); |
| } |
| |
| static const TypeInfo i8042_mmio_info = { |
| .name = TYPE_I8042_MMIO, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_init = i8042_mmio_init, |
| .instance_size = sizeof(MMIOKBDState), |
| .class_init = i8042_mmio_class_init |
| }; |
| |
| void i8042_isa_mouse_fake_event(ISAKBDState *isa) |
| { |
| KBDState *s = &isa->kbd; |
| |
| ps2_mouse_fake_event(&s->ps2mouse); |
| } |
| |
| void i8042_setup_a20_line(ISADevice *dev, qemu_irq a20_out) |
| { |
| qdev_connect_gpio_out_named(DEVICE(dev), I8042_A20_LINE, 0, a20_out); |
| } |
| |
| static const VMStateDescription vmstate_kbd_isa = { |
| .name = "pckbd", |
| .version_id = 3, |
| .minimum_version_id = 3, |
| .fields = (const VMStateField[]) { |
| VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const MemoryRegionOps i8042_data_ops = { |
| .read = kbd_read_data, |
| .write = kbd_write_data, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static const MemoryRegionOps i8042_cmd_ops = { |
| .read = kbd_read_status, |
| .write = kbd_write_command, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void i8042_set_kbd_irq(void *opaque, int n, int level) |
| { |
| ISAKBDState *s = I8042(opaque); |
| KBDState *ks = &s->kbd; |
| |
| kbd_update_kbd_irq(ks, level); |
| } |
| |
| static void i8042_set_mouse_irq(void *opaque, int n, int level) |
| { |
| ISAKBDState *s = I8042(opaque); |
| KBDState *ks = &s->kbd; |
| |
| kbd_update_aux_irq(ks, level); |
| } |
| |
| |
| static void i8042_reset(DeviceState *dev) |
| { |
| ISAKBDState *s = I8042(dev); |
| KBDState *ks = &s->kbd; |
| |
| kbd_reset(ks); |
| } |
| |
| static void i8042_initfn(Object *obj) |
| { |
| ISAKBDState *isa_s = I8042(obj); |
| KBDState *s = &isa_s->kbd; |
| |
| memory_region_init_io(isa_s->io + 0, obj, &i8042_data_ops, s, |
| "i8042-data", 1); |
| memory_region_init_io(isa_s->io + 1, obj, &i8042_cmd_ops, s, |
| "i8042-cmd", 1); |
| |
| object_initialize_child(obj, "ps2kbd", &s->ps2kbd, TYPE_PS2_KBD_DEVICE); |
| object_initialize_child(obj, "ps2mouse", &s->ps2mouse, |
| TYPE_PS2_MOUSE_DEVICE); |
| |
| qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, I8042_A20_LINE, 1); |
| |
| qdev_init_gpio_out(DEVICE(obj), s->irqs, 2); |
| qdev_init_gpio_in_named(DEVICE(obj), i8042_set_kbd_irq, |
| "ps2-kbd-input-irq", 1); |
| qdev_init_gpio_in_named(DEVICE(obj), i8042_set_mouse_irq, |
| "ps2-mouse-input-irq", 1); |
| } |
| |
| static void i8042_realizefn(DeviceState *dev, Error **errp) |
| { |
| ISADevice *isadev = ISA_DEVICE(dev); |
| ISAKBDState *isa_s = I8042(dev); |
| KBDState *s = &isa_s->kbd; |
| |
| if (isa_s->kbd_irq >= ISA_NUM_IRQS) { |
| error_setg(errp, "Maximum value for \"kbd-irq\" is: %u", |
| ISA_NUM_IRQS - 1); |
| return; |
| } |
| |
| if (isa_s->mouse_irq >= ISA_NUM_IRQS) { |
| error_setg(errp, "Maximum value for \"mouse-irq\" is: %u", |
| ISA_NUM_IRQS - 1); |
| return; |
| } |
| |
| isa_connect_gpio_out(isadev, I8042_KBD_IRQ, isa_s->kbd_irq); |
| isa_connect_gpio_out(isadev, I8042_MOUSE_IRQ, isa_s->mouse_irq); |
| |
| isa_register_ioport(isadev, isa_s->io + 0, 0x60); |
| isa_register_ioport(isadev, isa_s->io + 1, 0x64); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->ps2kbd), errp)) { |
| return; |
| } |
| |
| qdev_connect_gpio_out(DEVICE(&s->ps2kbd), PS2_DEVICE_IRQ, |
| qdev_get_gpio_in_named(dev, "ps2-kbd-input-irq", |
| 0)); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->ps2mouse), errp)) { |
| return; |
| } |
| |
| qdev_connect_gpio_out(DEVICE(&s->ps2mouse), PS2_DEVICE_IRQ, |
| qdev_get_gpio_in_named(dev, "ps2-mouse-input-irq", |
| 0)); |
| |
| if (isa_s->kbd_throttle && !isa_s->kbd.extended_state) { |
| warn_report(TYPE_I8042 ": can't enable kbd-throttle without" |
| " extended-state, disabling kbd-throttle"); |
| } else if (isa_s->kbd_throttle) { |
| s->throttle_timer = timer_new_us(QEMU_CLOCK_VIRTUAL, |
| kbd_throttle_timeout, s); |
| } |
| } |
| |
| static void i8042_build_aml(AcpiDevAmlIf *adev, Aml *scope) |
| { |
| ISAKBDState *isa_s = I8042(adev); |
| Aml *kbd; |
| Aml *mou; |
| Aml *crs; |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0060, 0x0060, 0x01, 0x01)); |
| aml_append(crs, aml_io(AML_DECODE16, 0x0064, 0x0064, 0x01, 0x01)); |
| aml_append(crs, aml_irq_no_flags(isa_s->kbd_irq)); |
| |
| kbd = aml_device("KBD"); |
| aml_append(kbd, aml_name_decl("_HID", aml_eisaid("PNP0303"))); |
| aml_append(kbd, aml_name_decl("_STA", aml_int(0xf))); |
| aml_append(kbd, aml_name_decl("_CRS", crs)); |
| |
| crs = aml_resource_template(); |
| aml_append(crs, aml_irq_no_flags(isa_s->mouse_irq)); |
| |
| mou = aml_device("MOU"); |
| aml_append(mou, aml_name_decl("_HID", aml_eisaid("PNP0F13"))); |
| aml_append(mou, aml_name_decl("_STA", aml_int(0xf))); |
| aml_append(mou, aml_name_decl("_CRS", crs)); |
| |
| aml_append(scope, kbd); |
| aml_append(scope, mou); |
| } |
| |
| static Property i8042_properties[] = { |
| DEFINE_PROP_BOOL("extended-state", ISAKBDState, kbd.extended_state, true), |
| DEFINE_PROP_BOOL("kbd-throttle", ISAKBDState, kbd_throttle, false), |
| DEFINE_PROP_UINT8("kbd-irq", ISAKBDState, kbd_irq, 1), |
| DEFINE_PROP_UINT8("mouse-irq", ISAKBDState, mouse_irq, 12), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void i8042_class_initfn(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass); |
| |
| device_class_set_props(dc, i8042_properties); |
| dc->reset = i8042_reset; |
| dc->realize = i8042_realizefn; |
| dc->vmsd = &vmstate_kbd_isa; |
| adevc->build_dev_aml = i8042_build_aml; |
| set_bit(DEVICE_CATEGORY_INPUT, dc->categories); |
| } |
| |
| static const TypeInfo i8042_info = { |
| .name = TYPE_I8042, |
| .parent = TYPE_ISA_DEVICE, |
| .instance_size = sizeof(ISAKBDState), |
| .instance_init = i8042_initfn, |
| .class_init = i8042_class_initfn, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_ACPI_DEV_AML_IF }, |
| { }, |
| }, |
| }; |
| |
| static void i8042_register_types(void) |
| { |
| type_register_static(&i8042_info); |
| type_register_static(&i8042_mmio_info); |
| } |
| |
| type_init(i8042_register_types) |