| /* |
| * QEMU PowerPC PowerNV Processor Service Interface (PSI) model |
| * |
| * Copyright (c) 2015-2017, IBM Corporation. |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "target/ppc/cpu.h" |
| #include "qemu/log.h" |
| #include "qapi/error.h" |
| |
| #include "exec/address-spaces.h" |
| |
| #include "hw/ppc/fdt.h" |
| #include "hw/ppc/pnv.h" |
| #include "hw/ppc/pnv_xscom.h" |
| #include "hw/ppc/pnv_psi.h" |
| |
| #include <libfdt.h> |
| |
| #define PSIHB_XSCOM_FIR_RW 0x00 |
| #define PSIHB_XSCOM_FIR_AND 0x01 |
| #define PSIHB_XSCOM_FIR_OR 0x02 |
| #define PSIHB_XSCOM_FIRMASK_RW 0x03 |
| #define PSIHB_XSCOM_FIRMASK_AND 0x04 |
| #define PSIHB_XSCOM_FIRMASK_OR 0x05 |
| #define PSIHB_XSCOM_FIRACT0 0x06 |
| #define PSIHB_XSCOM_FIRACT1 0x07 |
| |
| /* Host Bridge Base Address Register */ |
| #define PSIHB_XSCOM_BAR 0x0a |
| #define PSIHB_BAR_EN 0x0000000000000001ull |
| |
| /* FSP Base Address Register */ |
| #define PSIHB_XSCOM_FSPBAR 0x0b |
| |
| /* PSI Host Bridge Control/Status Register */ |
| #define PSIHB_XSCOM_CR 0x0e |
| #define PSIHB_CR_FSP_CMD_ENABLE 0x8000000000000000ull |
| #define PSIHB_CR_FSP_MMIO_ENABLE 0x4000000000000000ull |
| #define PSIHB_CR_FSP_IRQ_ENABLE 0x1000000000000000ull |
| #define PSIHB_CR_FSP_ERR_RSP_ENABLE 0x0800000000000000ull |
| #define PSIHB_CR_PSI_LINK_ENABLE 0x0400000000000000ull |
| #define PSIHB_CR_FSP_RESET 0x0200000000000000ull |
| #define PSIHB_CR_PSIHB_RESET 0x0100000000000000ull |
| #define PSIHB_CR_PSI_IRQ 0x0000800000000000ull |
| #define PSIHB_CR_FSP_IRQ 0x0000400000000000ull |
| #define PSIHB_CR_FSP_LINK_ACTIVE 0x0000200000000000ull |
| #define PSIHB_CR_IRQ_CMD_EXPECT 0x0000010000000000ull |
| /* and more ... */ |
| |
| /* PSIHB Status / Error Mask Register */ |
| #define PSIHB_XSCOM_SEMR 0x0f |
| |
| /* XIVR, to signal interrupts to the CEC firmware. more XIVR below. */ |
| #define PSIHB_XSCOM_XIVR_FSP 0x10 |
| #define PSIHB_XIVR_SERVER_SH 40 |
| #define PSIHB_XIVR_SERVER_MSK (0xffffull << PSIHB_XIVR_SERVER_SH) |
| #define PSIHB_XIVR_PRIO_SH 32 |
| #define PSIHB_XIVR_PRIO_MSK (0xffull << PSIHB_XIVR_PRIO_SH) |
| #define PSIHB_XIVR_SRC_SH 29 |
| #define PSIHB_XIVR_SRC_MSK (0x7ull << PSIHB_XIVR_SRC_SH) |
| #define PSIHB_XIVR_PENDING 0x01000000ull |
| |
| /* PSI Host Bridge Set Control/ Status Register */ |
| #define PSIHB_XSCOM_SCR 0x12 |
| |
| /* PSI Host Bridge Clear Control/ Status Register */ |
| #define PSIHB_XSCOM_CCR 0x13 |
| |
| /* DMA Upper Address Register */ |
| #define PSIHB_XSCOM_DMA_UPADD 0x14 |
| |
| /* Interrupt Status */ |
| #define PSIHB_XSCOM_IRQ_STAT 0x15 |
| #define PSIHB_IRQ_STAT_OCC 0x0000001000000000ull |
| #define PSIHB_IRQ_STAT_FSI 0x0000000800000000ull |
| #define PSIHB_IRQ_STAT_LPCI2C 0x0000000400000000ull |
| #define PSIHB_IRQ_STAT_LOCERR 0x0000000200000000ull |
| #define PSIHB_IRQ_STAT_EXT 0x0000000100000000ull |
| |
| /* remaining XIVR */ |
| #define PSIHB_XSCOM_XIVR_OCC 0x16 |
| #define PSIHB_XSCOM_XIVR_FSI 0x17 |
| #define PSIHB_XSCOM_XIVR_LPCI2C 0x18 |
| #define PSIHB_XSCOM_XIVR_LOCERR 0x19 |
| #define PSIHB_XSCOM_XIVR_EXT 0x1a |
| |
| /* Interrupt Requester Source Compare Register */ |
| #define PSIHB_XSCOM_IRSN 0x1b |
| #define PSIHB_IRSN_COMP_SH 45 |
| #define PSIHB_IRSN_COMP_MSK (0x7ffffull << PSIHB_IRSN_COMP_SH) |
| #define PSIHB_IRSN_IRQ_MUX 0x0000000800000000ull |
| #define PSIHB_IRSN_IRQ_RESET 0x0000000400000000ull |
| #define PSIHB_IRSN_DOWNSTREAM_EN 0x0000000200000000ull |
| #define PSIHB_IRSN_UPSTREAM_EN 0x0000000100000000ull |
| #define PSIHB_IRSN_COMPMASK_SH 13 |
| #define PSIHB_IRSN_COMPMASK_MSK (0x7ffffull << PSIHB_IRSN_COMPMASK_SH) |
| |
| #define PSIHB_BAR_MASK 0x0003fffffff00000ull |
| #define PSIHB_FSPBAR_MASK 0x0003ffff00000000ull |
| |
| static void pnv_psi_set_bar(PnvPsi *psi, uint64_t bar) |
| { |
| MemoryRegion *sysmem = get_system_memory(); |
| uint64_t old = psi->regs[PSIHB_XSCOM_BAR]; |
| |
| psi->regs[PSIHB_XSCOM_BAR] = bar & (PSIHB_BAR_MASK | PSIHB_BAR_EN); |
| |
| /* Update MR, always remove it first */ |
| if (old & PSIHB_BAR_EN) { |
| memory_region_del_subregion(sysmem, &psi->regs_mr); |
| } |
| |
| /* Then add it back if needed */ |
| if (bar & PSIHB_BAR_EN) { |
| uint64_t addr = bar & PSIHB_BAR_MASK; |
| memory_region_add_subregion(sysmem, addr, &psi->regs_mr); |
| } |
| } |
| |
| static void pnv_psi_update_fsp_mr(PnvPsi *psi) |
| { |
| /* TODO: Update FSP MR if/when we support FSP BAR */ |
| } |
| |
| static void pnv_psi_set_cr(PnvPsi *psi, uint64_t cr) |
| { |
| uint64_t old = psi->regs[PSIHB_XSCOM_CR]; |
| |
| psi->regs[PSIHB_XSCOM_CR] = cr; |
| |
| /* Check some bit changes */ |
| if ((old ^ psi->regs[PSIHB_XSCOM_CR]) & PSIHB_CR_FSP_MMIO_ENABLE) { |
| pnv_psi_update_fsp_mr(psi); |
| } |
| } |
| |
| static void pnv_psi_set_irsn(PnvPsi *psi, uint64_t val) |
| { |
| ICSState *ics = &psi->ics; |
| |
| /* In this model we ignore the up/down enable bits for now |
| * as SW doesn't use them (other than setting them at boot). |
| * We ignore IRQ_MUX, its meaning isn't clear and we don't use |
| * it and finally we ignore reset (XXX fix that ?) |
| */ |
| psi->regs[PSIHB_XSCOM_IRSN] = val & (PSIHB_IRSN_COMP_MSK | |
| PSIHB_IRSN_IRQ_MUX | |
| PSIHB_IRSN_IRQ_RESET | |
| PSIHB_IRSN_DOWNSTREAM_EN | |
| PSIHB_IRSN_UPSTREAM_EN); |
| |
| /* We ignore the compare mask as well, our ICS emulation is too |
| * simplistic to make any use if it, and we extract the offset |
| * from the compare value |
| */ |
| ics->offset = (val & PSIHB_IRSN_COMP_MSK) >> PSIHB_IRSN_COMP_SH; |
| } |
| |
| /* |
| * FSP and PSI interrupts are muxed under the same number. |
| */ |
| static const uint32_t xivr_regs[] = { |
| [PSIHB_IRQ_PSI] = PSIHB_XSCOM_XIVR_FSP, |
| [PSIHB_IRQ_FSP] = PSIHB_XSCOM_XIVR_FSP, |
| [PSIHB_IRQ_OCC] = PSIHB_XSCOM_XIVR_OCC, |
| [PSIHB_IRQ_FSI] = PSIHB_XSCOM_XIVR_FSI, |
| [PSIHB_IRQ_LPC_I2C] = PSIHB_XSCOM_XIVR_LPCI2C, |
| [PSIHB_IRQ_LOCAL_ERR] = PSIHB_XSCOM_XIVR_LOCERR, |
| [PSIHB_IRQ_EXTERNAL] = PSIHB_XSCOM_XIVR_EXT, |
| }; |
| |
| static const uint32_t stat_regs[] = { |
| [PSIHB_IRQ_PSI] = PSIHB_XSCOM_CR, |
| [PSIHB_IRQ_FSP] = PSIHB_XSCOM_CR, |
| [PSIHB_IRQ_OCC] = PSIHB_XSCOM_IRQ_STAT, |
| [PSIHB_IRQ_FSI] = PSIHB_XSCOM_IRQ_STAT, |
| [PSIHB_IRQ_LPC_I2C] = PSIHB_XSCOM_IRQ_STAT, |
| [PSIHB_IRQ_LOCAL_ERR] = PSIHB_XSCOM_IRQ_STAT, |
| [PSIHB_IRQ_EXTERNAL] = PSIHB_XSCOM_IRQ_STAT, |
| }; |
| |
| static const uint64_t stat_bits[] = { |
| [PSIHB_IRQ_PSI] = PSIHB_CR_PSI_IRQ, |
| [PSIHB_IRQ_FSP] = PSIHB_CR_FSP_IRQ, |
| [PSIHB_IRQ_OCC] = PSIHB_IRQ_STAT_OCC, |
| [PSIHB_IRQ_FSI] = PSIHB_IRQ_STAT_FSI, |
| [PSIHB_IRQ_LPC_I2C] = PSIHB_IRQ_STAT_LPCI2C, |
| [PSIHB_IRQ_LOCAL_ERR] = PSIHB_IRQ_STAT_LOCERR, |
| [PSIHB_IRQ_EXTERNAL] = PSIHB_IRQ_STAT_EXT, |
| }; |
| |
| void pnv_psi_irq_set(PnvPsi *psi, PnvPsiIrq irq, bool state) |
| { |
| ICSState *ics = &psi->ics; |
| uint32_t xivr_reg; |
| uint32_t stat_reg; |
| uint32_t src; |
| bool masked; |
| |
| if (irq > PSIHB_IRQ_EXTERNAL) { |
| qemu_log_mask(LOG_GUEST_ERROR, "PSI: Unsupported irq %d\n", irq); |
| return; |
| } |
| |
| xivr_reg = xivr_regs[irq]; |
| stat_reg = stat_regs[irq]; |
| |
| src = (psi->regs[xivr_reg] & PSIHB_XIVR_SRC_MSK) >> PSIHB_XIVR_SRC_SH; |
| if (state) { |
| psi->regs[stat_reg] |= stat_bits[irq]; |
| /* TODO: optimization, check mask here. That means |
| * re-evaluating when unmasking |
| */ |
| qemu_irq_raise(ics->qirqs[src]); |
| } else { |
| psi->regs[stat_reg] &= ~stat_bits[irq]; |
| |
| /* FSP and PSI are muxed so don't lower if either is still set */ |
| if (stat_reg != PSIHB_XSCOM_CR || |
| !(psi->regs[stat_reg] & (PSIHB_CR_PSI_IRQ | PSIHB_CR_FSP_IRQ))) { |
| qemu_irq_lower(ics->qirqs[src]); |
| } else { |
| state = true; |
| } |
| } |
| |
| /* Note about the emulation of the pending bit: This isn't |
| * entirely correct. The pending bit should be cleared when the |
| * EOI has been received. However, we don't have callbacks on EOI |
| * (especially not under KVM) so no way to emulate that properly, |
| * so instead we just set that bit as the logical "output" of the |
| * XIVR (ie pending & !masked) |
| * |
| * CLG: We could define a new ICS object with a custom eoi() |
| * handler to clear the pending bit. But I am not sure this would |
| * be useful for the software anyhow. |
| */ |
| masked = (psi->regs[xivr_reg] & PSIHB_XIVR_PRIO_MSK) == PSIHB_XIVR_PRIO_MSK; |
| if (state && !masked) { |
| psi->regs[xivr_reg] |= PSIHB_XIVR_PENDING; |
| } else { |
| psi->regs[xivr_reg] &= ~PSIHB_XIVR_PENDING; |
| } |
| } |
| |
| static void pnv_psi_set_xivr(PnvPsi *psi, uint32_t reg, uint64_t val) |
| { |
| ICSState *ics = &psi->ics; |
| uint16_t server; |
| uint8_t prio; |
| uint8_t src; |
| |
| psi->regs[reg] = (psi->regs[reg] & PSIHB_XIVR_PENDING) | |
| (val & (PSIHB_XIVR_SERVER_MSK | |
| PSIHB_XIVR_PRIO_MSK | |
| PSIHB_XIVR_SRC_MSK)); |
| val = psi->regs[reg]; |
| server = (val & PSIHB_XIVR_SERVER_MSK) >> PSIHB_XIVR_SERVER_SH; |
| prio = (val & PSIHB_XIVR_PRIO_MSK) >> PSIHB_XIVR_PRIO_SH; |
| src = (val & PSIHB_XIVR_SRC_MSK) >> PSIHB_XIVR_SRC_SH; |
| |
| if (src >= PSI_NUM_INTERRUPTS) { |
| qemu_log_mask(LOG_GUEST_ERROR, "PSI: Unsupported irq %d\n", src); |
| return; |
| } |
| |
| /* Remove pending bit if the IRQ is masked */ |
| if ((psi->regs[reg] & PSIHB_XIVR_PRIO_MSK) == PSIHB_XIVR_PRIO_MSK) { |
| psi->regs[reg] &= ~PSIHB_XIVR_PENDING; |
| } |
| |
| /* The low order 2 bits are the link pointer (Type II interrupts). |
| * Shift back to get a valid IRQ server. |
| */ |
| server >>= 2; |
| |
| /* Now because of source remapping, weird things can happen |
| * if you change the source number dynamically, our simple ICS |
| * doesn't deal with remapping. So we just poke a different |
| * ICS entry based on what source number was written. This will |
| * do for now but a more accurate implementation would instead |
| * use a fixed server/prio and a remapper of the generated irq. |
| */ |
| ics_simple_write_xive(ics, src, server, prio, prio); |
| } |
| |
| static uint64_t pnv_psi_reg_read(PnvPsi *psi, uint32_t offset, bool mmio) |
| { |
| uint64_t val = 0xffffffffffffffffull; |
| |
| switch (offset) { |
| case PSIHB_XSCOM_FIR_RW: |
| case PSIHB_XSCOM_FIRACT0: |
| case PSIHB_XSCOM_FIRACT1: |
| case PSIHB_XSCOM_BAR: |
| case PSIHB_XSCOM_FSPBAR: |
| case PSIHB_XSCOM_CR: |
| case PSIHB_XSCOM_XIVR_FSP: |
| case PSIHB_XSCOM_XIVR_OCC: |
| case PSIHB_XSCOM_XIVR_FSI: |
| case PSIHB_XSCOM_XIVR_LPCI2C: |
| case PSIHB_XSCOM_XIVR_LOCERR: |
| case PSIHB_XSCOM_XIVR_EXT: |
| case PSIHB_XSCOM_IRQ_STAT: |
| case PSIHB_XSCOM_SEMR: |
| case PSIHB_XSCOM_DMA_UPADD: |
| case PSIHB_XSCOM_IRSN: |
| val = psi->regs[offset]; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "PSI: read at Ox%" PRIx32 "\n", offset); |
| } |
| return val; |
| } |
| |
| static void pnv_psi_reg_write(PnvPsi *psi, uint32_t offset, uint64_t val, |
| bool mmio) |
| { |
| switch (offset) { |
| case PSIHB_XSCOM_FIR_RW: |
| case PSIHB_XSCOM_FIRACT0: |
| case PSIHB_XSCOM_FIRACT1: |
| case PSIHB_XSCOM_SEMR: |
| case PSIHB_XSCOM_DMA_UPADD: |
| psi->regs[offset] = val; |
| break; |
| case PSIHB_XSCOM_FIR_OR: |
| psi->regs[PSIHB_XSCOM_FIR_RW] |= val; |
| break; |
| case PSIHB_XSCOM_FIR_AND: |
| psi->regs[PSIHB_XSCOM_FIR_RW] &= val; |
| break; |
| case PSIHB_XSCOM_BAR: |
| /* Only XSCOM can write this one */ |
| if (!mmio) { |
| pnv_psi_set_bar(psi, val); |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, "PSI: invalid write of BAR\n"); |
| } |
| break; |
| case PSIHB_XSCOM_FSPBAR: |
| psi->regs[PSIHB_XSCOM_FSPBAR] = val & PSIHB_FSPBAR_MASK; |
| pnv_psi_update_fsp_mr(psi); |
| break; |
| case PSIHB_XSCOM_CR: |
| pnv_psi_set_cr(psi, val); |
| break; |
| case PSIHB_XSCOM_SCR: |
| pnv_psi_set_cr(psi, psi->regs[PSIHB_XSCOM_CR] | val); |
| break; |
| case PSIHB_XSCOM_CCR: |
| pnv_psi_set_cr(psi, psi->regs[PSIHB_XSCOM_CR] & ~val); |
| break; |
| case PSIHB_XSCOM_XIVR_FSP: |
| case PSIHB_XSCOM_XIVR_OCC: |
| case PSIHB_XSCOM_XIVR_FSI: |
| case PSIHB_XSCOM_XIVR_LPCI2C: |
| case PSIHB_XSCOM_XIVR_LOCERR: |
| case PSIHB_XSCOM_XIVR_EXT: |
| pnv_psi_set_xivr(psi, offset, val); |
| break; |
| case PSIHB_XSCOM_IRQ_STAT: |
| /* Read only */ |
| qemu_log_mask(LOG_GUEST_ERROR, "PSI: invalid write of IRQ_STAT\n"); |
| break; |
| case PSIHB_XSCOM_IRSN: |
| pnv_psi_set_irsn(psi, val); |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "PSI: write at Ox%" PRIx32 "\n", offset); |
| } |
| } |
| |
| /* |
| * The values of the registers when accessed through the MMIO region |
| * follow the relation : xscom = (mmio + 0x50) >> 3 |
| */ |
| static uint64_t pnv_psi_mmio_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| return pnv_psi_reg_read(opaque, (addr >> 3) + PSIHB_XSCOM_BAR, true); |
| } |
| |
| static void pnv_psi_mmio_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| pnv_psi_reg_write(opaque, (addr >> 3) + PSIHB_XSCOM_BAR, val, true); |
| } |
| |
| static const MemoryRegionOps psi_mmio_ops = { |
| .read = pnv_psi_mmio_read, |
| .write = pnv_psi_mmio_write, |
| .endianness = DEVICE_BIG_ENDIAN, |
| .valid = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| .impl = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| }; |
| |
| static uint64_t pnv_psi_xscom_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| return pnv_psi_reg_read(opaque, addr >> 3, false); |
| } |
| |
| static void pnv_psi_xscom_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| pnv_psi_reg_write(opaque, addr >> 3, val, false); |
| } |
| |
| static const MemoryRegionOps pnv_psi_xscom_ops = { |
| .read = pnv_psi_xscom_read, |
| .write = pnv_psi_xscom_write, |
| .endianness = DEVICE_BIG_ENDIAN, |
| .valid = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| .impl = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| } |
| }; |
| |
| static void pnv_psi_init(Object *obj) |
| { |
| PnvPsi *psi = PNV_PSI(obj); |
| |
| object_initialize(&psi->ics, sizeof(psi->ics), TYPE_ICS_SIMPLE); |
| object_property_add_child(obj, "ics-psi", OBJECT(&psi->ics), NULL); |
| } |
| |
| static const uint8_t irq_to_xivr[] = { |
| PSIHB_XSCOM_XIVR_FSP, |
| PSIHB_XSCOM_XIVR_OCC, |
| PSIHB_XSCOM_XIVR_FSI, |
| PSIHB_XSCOM_XIVR_LPCI2C, |
| PSIHB_XSCOM_XIVR_LOCERR, |
| PSIHB_XSCOM_XIVR_EXT, |
| }; |
| |
| static void pnv_psi_realize(DeviceState *dev, Error **errp) |
| { |
| PnvPsi *psi = PNV_PSI(dev); |
| ICSState *ics = &psi->ics; |
| Object *obj; |
| Error *err = NULL; |
| unsigned int i; |
| |
| obj = object_property_get_link(OBJECT(dev), "xics", &err); |
| if (!obj) { |
| error_setg(errp, "%s: required link 'xics' not found: %s", |
| __func__, error_get_pretty(err)); |
| return; |
| } |
| |
| /* Create PSI interrupt control source */ |
| object_property_add_const_link(OBJECT(ics), ICS_PROP_XICS, obj, |
| &error_abort); |
| object_property_set_int(OBJECT(ics), PSI_NUM_INTERRUPTS, "nr-irqs", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| object_property_set_bool(OBJECT(ics), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| for (i = 0; i < ics->nr_irqs; i++) { |
| ics_set_irq_type(ics, i, true); |
| } |
| |
| /* XSCOM region for PSI registers */ |
| pnv_xscom_region_init(&psi->xscom_regs, OBJECT(dev), &pnv_psi_xscom_ops, |
| psi, "xscom-psi", PNV_XSCOM_PSIHB_SIZE); |
| |
| /* Initialize MMIO region */ |
| memory_region_init_io(&psi->regs_mr, OBJECT(dev), &psi_mmio_ops, psi, |
| "psihb", PNV_PSIHB_SIZE); |
| |
| /* Default BAR for MMIO region */ |
| pnv_psi_set_bar(psi, psi->bar | PSIHB_BAR_EN); |
| |
| /* Default sources in XIVR */ |
| for (i = 0; i < PSI_NUM_INTERRUPTS; i++) { |
| uint8_t xivr = irq_to_xivr[i]; |
| psi->regs[xivr] = PSIHB_XIVR_PRIO_MSK | |
| ((uint64_t) i << PSIHB_XIVR_SRC_SH); |
| } |
| } |
| |
| static int pnv_psi_dt_xscom(PnvXScomInterface *dev, void *fdt, int xscom_offset) |
| { |
| const char compat[] = "ibm,power8-psihb-x\0ibm,psihb-x"; |
| char *name; |
| int offset; |
| uint32_t lpc_pcba = PNV_XSCOM_PSIHB_BASE; |
| uint32_t reg[] = { |
| cpu_to_be32(lpc_pcba), |
| cpu_to_be32(PNV_XSCOM_PSIHB_SIZE) |
| }; |
| |
| name = g_strdup_printf("psihb@%x", lpc_pcba); |
| offset = fdt_add_subnode(fdt, xscom_offset, name); |
| _FDT(offset); |
| g_free(name); |
| |
| _FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg)))); |
| |
| _FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 2))); |
| _FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 1))); |
| _FDT((fdt_setprop(fdt, offset, "compatible", compat, |
| sizeof(compat)))); |
| return 0; |
| } |
| |
| static Property pnv_psi_properties[] = { |
| DEFINE_PROP_UINT64("bar", PnvPsi, bar, 0), |
| DEFINE_PROP_UINT64("fsp-bar", PnvPsi, fsp_bar, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void pnv_psi_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PnvXScomInterfaceClass *xdc = PNV_XSCOM_INTERFACE_CLASS(klass); |
| |
| xdc->dt_xscom = pnv_psi_dt_xscom; |
| |
| dc->realize = pnv_psi_realize; |
| dc->props = pnv_psi_properties; |
| } |
| |
| static const TypeInfo pnv_psi_info = { |
| .name = TYPE_PNV_PSI, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(PnvPsi), |
| .instance_init = pnv_psi_init, |
| .class_init = pnv_psi_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_PNV_XSCOM_INTERFACE }, |
| { } |
| } |
| }; |
| |
| static void pnv_psi_register_types(void) |
| { |
| type_register_static(&pnv_psi_info); |
| } |
| |
| type_init(pnv_psi_register_types) |