| /* |
| * QEMU IDE Emulation: MacIO support. |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "hw/ppc/mac.h" |
| #include "hw/ppc/mac_dbdma.h" |
| #include "sysemu/block-backend.h" |
| #include "sysemu/dma.h" |
| |
| #include "hw/ide/internal.h" |
| |
| /* debug MACIO */ |
| // #define DEBUG_MACIO |
| |
| #ifdef DEBUG_MACIO |
| static const int debug_macio = 1; |
| #else |
| static const int debug_macio = 0; |
| #endif |
| |
| #define MACIO_DPRINTF(fmt, ...) do { \ |
| if (debug_macio) { \ |
| printf(fmt , ## __VA_ARGS__); \ |
| } \ |
| } while (0) |
| |
| |
| /***********************************************************/ |
| /* MacIO based PowerPC IDE */ |
| |
| #define MACIO_PAGE_SIZE 4096 |
| |
| static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) |
| { |
| DBDMA_io *io = opaque; |
| MACIOIDEState *m = io->opaque; |
| IDEState *s = idebus_active_if(&m->bus); |
| int64_t offset; |
| |
| MACIO_DPRINTF("pmac_ide_atapi_transfer_cb\n"); |
| |
| if (ret < 0) { |
| MACIO_DPRINTF("DMA error: %d\n", ret); |
| qemu_sglist_destroy(&s->sg); |
| ide_atapi_io_error(s, ret); |
| goto done; |
| } |
| |
| if (!m->dma_active) { |
| MACIO_DPRINTF("waiting for data (%#x - %#x - %x)\n", |
| s->nsector, io->len, s->status); |
| /* data not ready yet, wait for the channel to get restarted */ |
| io->processing = false; |
| return; |
| } |
| |
| if (s->io_buffer_size <= 0) { |
| MACIO_DPRINTF("End of IDE transfer\n"); |
| qemu_sglist_destroy(&s->sg); |
| ide_atapi_cmd_ok(s); |
| m->dma_active = false; |
| goto done; |
| } |
| |
| if (io->len == 0) { |
| MACIO_DPRINTF("End of DMA transfer\n"); |
| goto done; |
| } |
| |
| if (s->lba == -1) { |
| /* Non-block ATAPI transfer - just copy to RAM */ |
| s->io_buffer_size = MIN(s->io_buffer_size, io->len); |
| dma_memory_write(&address_space_memory, io->addr, s->io_buffer, |
| s->io_buffer_size); |
| io->len = 0; |
| ide_atapi_cmd_ok(s); |
| m->dma_active = false; |
| goto done; |
| } |
| |
| /* Calculate current offset */ |
| offset = ((int64_t)s->lba << 11) + s->io_buffer_index; |
| |
| qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1, |
| &address_space_memory); |
| qemu_sglist_add(&s->sg, io->addr, io->len); |
| s->io_buffer_size -= io->len; |
| s->io_buffer_index += io->len; |
| io->len = 0; |
| |
| s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1, |
| pmac_ide_atapi_transfer_cb, io); |
| return; |
| |
| done: |
| dma_memory_unmap(&address_space_memory, io->dma_mem, io->dma_len, |
| io->dir, io->dma_len); |
| |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->blk), &s->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| } |
| |
| ide_set_inactive(s, false); |
| io->dma_end(opaque); |
| } |
| |
| static void pmac_ide_transfer_cb(void *opaque, int ret) |
| { |
| DBDMA_io *io = opaque; |
| MACIOIDEState *m = io->opaque; |
| IDEState *s = idebus_active_if(&m->bus); |
| int64_t offset; |
| |
| MACIO_DPRINTF("pmac_ide_transfer_cb\n"); |
| |
| if (ret < 0) { |
| MACIO_DPRINTF("DMA error: %d\n", ret); |
| qemu_sglist_destroy(&s->sg); |
| ide_dma_error(s); |
| goto done; |
| } |
| |
| if (!m->dma_active) { |
| MACIO_DPRINTF("waiting for data (%#x - %#x - %x)\n", |
| s->nsector, io->len, s->status); |
| /* data not ready yet, wait for the channel to get restarted */ |
| io->processing = false; |
| return; |
| } |
| |
| if (s->io_buffer_size <= 0) { |
| MACIO_DPRINTF("End of IDE transfer\n"); |
| qemu_sglist_destroy(&s->sg); |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| m->dma_active = false; |
| goto done; |
| } |
| |
| if (io->len == 0) { |
| MACIO_DPRINTF("End of DMA transfer\n"); |
| goto done; |
| } |
| |
| /* Calculate number of sectors */ |
| offset = (ide_get_sector(s) << 9) + s->io_buffer_index; |
| |
| qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1, |
| &address_space_memory); |
| qemu_sglist_add(&s->sg, io->addr, io->len); |
| s->io_buffer_size -= io->len; |
| s->io_buffer_index += io->len; |
| io->len = 0; |
| |
| switch (s->dma_cmd) { |
| case IDE_DMA_READ: |
| s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1, |
| pmac_ide_atapi_transfer_cb, io); |
| break; |
| case IDE_DMA_WRITE: |
| s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset, 0x1, |
| pmac_ide_transfer_cb, io); |
| break; |
| case IDE_DMA_TRIM: |
| s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk), &s->sg, |
| offset, 0x1, ide_issue_trim, s, |
| pmac_ide_transfer_cb, io, |
| DMA_DIRECTION_TO_DEVICE); |
| break; |
| default: |
| abort(); |
| } |
| |
| return; |
| |
| done: |
| dma_memory_unmap(&address_space_memory, io->dma_mem, io->dma_len, |
| io->dir, io->dma_len); |
| |
| if (s->dma_cmd == IDE_DMA_READ || s->dma_cmd == IDE_DMA_WRITE) { |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->blk), &s->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| } |
| } |
| |
| ide_set_inactive(s, false); |
| io->dma_end(opaque); |
| } |
| |
| static void pmac_ide_transfer(DBDMA_io *io) |
| { |
| MACIOIDEState *m = io->opaque; |
| IDEState *s = idebus_active_if(&m->bus); |
| |
| MACIO_DPRINTF("\n"); |
| |
| if (s->drive_kind == IDE_CD) { |
| block_acct_start(blk_get_stats(s->blk), &s->acct, io->len, |
| BLOCK_ACCT_READ); |
| |
| pmac_ide_atapi_transfer_cb(io, 0); |
| return; |
| } |
| |
| switch (s->dma_cmd) { |
| case IDE_DMA_READ: |
| block_acct_start(blk_get_stats(s->blk), &s->acct, io->len, |
| BLOCK_ACCT_READ); |
| break; |
| case IDE_DMA_WRITE: |
| block_acct_start(blk_get_stats(s->blk), &s->acct, io->len, |
| BLOCK_ACCT_WRITE); |
| break; |
| default: |
| break; |
| } |
| |
| pmac_ide_transfer_cb(io, 0); |
| } |
| |
| static void pmac_ide_flush(DBDMA_io *io) |
| { |
| MACIOIDEState *m = io->opaque; |
| IDEState *s = idebus_active_if(&m->bus); |
| |
| if (s->bus->dma->aiocb) { |
| blk_drain(s->blk); |
| } |
| } |
| |
| /* PowerMac IDE memory IO */ |
| static uint64_t pmac_ide_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| MACIOIDEState *d = opaque; |
| uint64_t retval = 0xffffffff; |
| int reg = addr >> 4; |
| |
| switch (reg) { |
| case 0x0: |
| if (size == 2) { |
| retval = ide_data_readw(&d->bus, 0); |
| } else if (size == 4) { |
| retval = ide_data_readl(&d->bus, 0); |
| } |
| break; |
| case 0x1 ... 0x7: |
| if (size == 1) { |
| retval = ide_ioport_read(&d->bus, reg); |
| } |
| break; |
| case 0x8: |
| case 0x16: |
| if (size == 1) { |
| retval = ide_status_read(&d->bus, 0); |
| } |
| break; |
| case 0x20: |
| if (size == 4) { |
| retval = d->timing_reg; |
| } |
| break; |
| case 0x30: |
| /* This is an interrupt state register that only exists |
| * in the KeyLargo and later variants. Bit 0x8000_0000 |
| * latches the DMA interrupt and has to be written to |
| * clear. Bit 0x4000_0000 is an image of the disk |
| * interrupt. MacOS X relies on this and will hang if |
| * we don't provide at least the disk interrupt |
| */ |
| if (size == 4) { |
| retval = d->irq_reg; |
| } |
| break; |
| } |
| |
| return retval; |
| } |
| |
| |
| static void pmac_ide_write(void *opaque, hwaddr addr, uint64_t val, |
| unsigned size) |
| { |
| MACIOIDEState *d = opaque; |
| int reg = addr >> 4; |
| |
| switch (reg) { |
| case 0x0: |
| if (size == 2) { |
| ide_data_writew(&d->bus, 0, val); |
| } else if (size == 4) { |
| ide_data_writel(&d->bus, 0, val); |
| } |
| break; |
| case 0x1 ... 0x7: |
| if (size == 1) { |
| ide_ioport_write(&d->bus, reg, val); |
| } |
| break; |
| case 0x8: |
| case 0x16: |
| if (size == 1) { |
| ide_cmd_write(&d->bus, 0, val); |
| } |
| break; |
| case 0x20: |
| if (size == 4) { |
| d->timing_reg = val; |
| } |
| break; |
| case 0x30: |
| if (size == 4) { |
| if (val & 0x80000000u) { |
| d->irq_reg &= 0x7fffffff; |
| } |
| } |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps pmac_ide_ops = { |
| .read = pmac_ide_read, |
| .write = pmac_ide_write, |
| .valid.min_access_size = 1, |
| .valid.max_access_size = 4, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static const VMStateDescription vmstate_pmac = { |
| .name = "ide", |
| .version_id = 5, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_IDE_BUS(bus, MACIOIDEState), |
| VMSTATE_IDE_DRIVES(bus.ifs, MACIOIDEState), |
| VMSTATE_BOOL(dma_active, MACIOIDEState), |
| VMSTATE_UINT32(timing_reg, MACIOIDEState), |
| VMSTATE_UINT32(irq_reg, MACIOIDEState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void macio_ide_reset(DeviceState *dev) |
| { |
| MACIOIDEState *d = MACIO_IDE(dev); |
| |
| ide_bus_reset(&d->bus); |
| } |
| |
| static int ide_nop_int(IDEDMA *dma, int x) |
| { |
| return 0; |
| } |
| |
| static int32_t ide_nop_int32(IDEDMA *dma, int32_t l) |
| { |
| return 0; |
| } |
| |
| static void ide_dbdma_start(IDEDMA *dma, IDEState *s, |
| BlockCompletionFunc *cb) |
| { |
| MACIOIDEState *m = container_of(dma, MACIOIDEState, dma); |
| |
| s->io_buffer_index = 0; |
| if (s->drive_kind == IDE_CD) { |
| s->io_buffer_size = s->packet_transfer_size; |
| } else { |
| s->io_buffer_size = s->nsector * BDRV_SECTOR_SIZE; |
| } |
| |
| MACIO_DPRINTF("\n\n------------ IDE transfer\n"); |
| MACIO_DPRINTF("buffer_size: %x buffer_index: %x\n", |
| s->io_buffer_size, s->io_buffer_index); |
| MACIO_DPRINTF("lba: %x size: %x\n", s->lba, s->io_buffer_size); |
| MACIO_DPRINTF("-------------------------\n"); |
| |
| m->dma_active = true; |
| DBDMA_kick(m->dbdma); |
| } |
| |
| static const IDEDMAOps dbdma_ops = { |
| .start_dma = ide_dbdma_start, |
| .prepare_buf = ide_nop_int32, |
| .rw_buf = ide_nop_int, |
| }; |
| |
| static void macio_ide_realizefn(DeviceState *dev, Error **errp) |
| { |
| MACIOIDEState *s = MACIO_IDE(dev); |
| |
| ide_init2(&s->bus, s->ide_irq); |
| |
| /* Register DMA callbacks */ |
| s->dma.ops = &dbdma_ops; |
| s->bus.dma = &s->dma; |
| } |
| |
| static void pmac_ide_irq(void *opaque, int n, int level) |
| { |
| MACIOIDEState *s = opaque; |
| uint32_t mask = 0x80000000u >> n; |
| |
| /* We need to reflect the IRQ state in the irq register */ |
| if (level) { |
| s->irq_reg |= mask; |
| } else { |
| s->irq_reg &= ~mask; |
| } |
| |
| if (n) { |
| qemu_set_irq(s->real_ide_irq, level); |
| } else { |
| qemu_set_irq(s->real_dma_irq, level); |
| } |
| } |
| |
| static void macio_ide_initfn(Object *obj) |
| { |
| SysBusDevice *d = SYS_BUS_DEVICE(obj); |
| MACIOIDEState *s = MACIO_IDE(obj); |
| |
| ide_bus_new(&s->bus, sizeof(s->bus), DEVICE(obj), 0, 2); |
| memory_region_init_io(&s->mem, obj, &pmac_ide_ops, s, "pmac-ide", 0x1000); |
| sysbus_init_mmio(d, &s->mem); |
| sysbus_init_irq(d, &s->real_ide_irq); |
| sysbus_init_irq(d, &s->real_dma_irq); |
| s->dma_irq = qemu_allocate_irq(pmac_ide_irq, s, 0); |
| s->ide_irq = qemu_allocate_irq(pmac_ide_irq, s, 1); |
| |
| object_property_add_link(obj, "dbdma", TYPE_MAC_DBDMA, |
| (Object **) &s->dbdma, |
| qdev_prop_allow_set_link_before_realize, 0, NULL); |
| } |
| |
| static Property macio_ide_properties[] = { |
| DEFINE_PROP_UINT32("channel", MACIOIDEState, channel, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void macio_ide_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| |
| dc->realize = macio_ide_realizefn; |
| dc->reset = macio_ide_reset; |
| dc->props = macio_ide_properties; |
| dc->vmsd = &vmstate_pmac; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| } |
| |
| static const TypeInfo macio_ide_type_info = { |
| .name = TYPE_MACIO_IDE, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(MACIOIDEState), |
| .instance_init = macio_ide_initfn, |
| .class_init = macio_ide_class_init, |
| }; |
| |
| static void macio_ide_register_types(void) |
| { |
| type_register_static(&macio_ide_type_info); |
| } |
| |
| /* hd_table must contain 2 block drivers */ |
| void macio_ide_init_drives(MACIOIDEState *s, DriveInfo **hd_table) |
| { |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| if (hd_table[i]) { |
| ide_create_drive(&s->bus, i, hd_table[i]); |
| } |
| } |
| } |
| |
| void macio_ide_register_dma(MACIOIDEState *s) |
| { |
| DBDMA_register_channel(s->dbdma, s->channel, s->dma_irq, |
| pmac_ide_transfer, pmac_ide_flush, s); |
| } |
| |
| type_init(macio_ide_register_types) |