| /* |
| * Copyright (c) 2018, Impinj, Inc. |
| * |
| * Designware PCIe IP block emulation |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see |
| * <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qemu/module.h" |
| #include "hw/pci/msi.h" |
| #include "hw/pci/pci_bridge.h" |
| #include "hw/pci/pci_host.h" |
| #include "hw/pci/pcie_port.h" |
| #include "hw/qdev-properties.h" |
| #include "migration/vmstate.h" |
| #include "hw/irq.h" |
| #include "hw/pci-host/designware.h" |
| |
| #define DESIGNWARE_PCIE_PORT_LINK_CONTROL 0x710 |
| #define DESIGNWARE_PCIE_PHY_DEBUG_R1 0x72C |
| #define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP BIT(4) |
| #define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C |
| #define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE BIT(17) |
| #define DESIGNWARE_PCIE_MSI_ADDR_LO 0x820 |
| #define DESIGNWARE_PCIE_MSI_ADDR_HI 0x824 |
| #define DESIGNWARE_PCIE_MSI_INTR0_ENABLE 0x828 |
| #define DESIGNWARE_PCIE_MSI_INTR0_MASK 0x82C |
| #define DESIGNWARE_PCIE_MSI_INTR0_STATUS 0x830 |
| #define DESIGNWARE_PCIE_ATU_VIEWPORT 0x900 |
| #define DESIGNWARE_PCIE_ATU_REGION_INBOUND BIT(31) |
| #define DESIGNWARE_PCIE_ATU_CR1 0x904 |
| #define DESIGNWARE_PCIE_ATU_TYPE_MEM (0x0 << 0) |
| #define DESIGNWARE_PCIE_ATU_CR2 0x908 |
| #define DESIGNWARE_PCIE_ATU_ENABLE BIT(31) |
| #define DESIGNWARE_PCIE_ATU_LOWER_BASE 0x90C |
| #define DESIGNWARE_PCIE_ATU_UPPER_BASE 0x910 |
| #define DESIGNWARE_PCIE_ATU_LIMIT 0x914 |
| #define DESIGNWARE_PCIE_ATU_LOWER_TARGET 0x918 |
| #define DESIGNWARE_PCIE_ATU_BUS(x) (((x) >> 24) & 0xff) |
| #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff) |
| #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C |
| |
| #define DESIGNWARE_PCIE_IRQ_MSI 3 |
| |
| static DesignwarePCIEHost * |
| designware_pcie_root_to_host(DesignwarePCIERoot *root) |
| { |
| BusState *bus = qdev_get_parent_bus(DEVICE(root)); |
| return DESIGNWARE_PCIE_HOST(bus->parent); |
| } |
| |
| static void designware_pcie_root_msi_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned len) |
| { |
| DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque); |
| DesignwarePCIEHost *host = designware_pcie_root_to_host(root); |
| |
| root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable; |
| |
| if (root->msi.intr[0].status & ~root->msi.intr[0].mask) { |
| qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1); |
| } |
| } |
| |
| static const MemoryRegionOps designware_pci_host_msi_ops = { |
| .write = designware_pcie_root_msi_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root) |
| |
| { |
| MemoryRegion *mem = &root->msi.iomem; |
| const uint64_t base = root->msi.base; |
| const bool enable = root->msi.intr[0].enable; |
| |
| memory_region_set_address(mem, base); |
| memory_region_set_enabled(mem, enable); |
| } |
| |
| static DesignwarePCIEViewport * |
| designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root) |
| { |
| const unsigned int idx = root->atu_viewport & 0xF; |
| const unsigned int dir = |
| !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND); |
| return &root->viewports[dir][idx]; |
| } |
| |
| static uint32_t |
| designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len) |
| { |
| DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); |
| DesignwarePCIEViewport *viewport = |
| designware_pcie_root_get_current_viewport(root); |
| |
| uint32_t val; |
| |
| switch (address) { |
| case DESIGNWARE_PCIE_PORT_LINK_CONTROL: |
| /* |
| * Linux guest uses this register only to configure number of |
| * PCIE lane (which in our case is irrelevant) and doesn't |
| * really care about the value it reads from this register |
| */ |
| val = 0xDEADBEEF; |
| break; |
| |
| case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: |
| /* |
| * To make sure that any code in guest waiting for speed |
| * change does not time out we always report |
| * PORT_LOGIC_SPEED_CHANGE as set |
| */ |
| val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE; |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_ADDR_LO: |
| val = root->msi.base; |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_ADDR_HI: |
| val = root->msi.base >> 32; |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: |
| val = root->msi.intr[0].enable; |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_INTR0_MASK: |
| val = root->msi.intr[0].mask; |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_INTR0_STATUS: |
| val = root->msi.intr[0].status; |
| break; |
| |
| case DESIGNWARE_PCIE_PHY_DEBUG_R1: |
| val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_VIEWPORT: |
| val = root->atu_viewport; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_LOWER_BASE: |
| val = viewport->base; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_UPPER_BASE: |
| val = viewport->base >> 32; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_LOWER_TARGET: |
| val = viewport->target; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_UPPER_TARGET: |
| val = viewport->target >> 32; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_LIMIT: |
| val = viewport->limit; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_CR1: |
| case DESIGNWARE_PCIE_ATU_CR2: |
| val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) / |
| sizeof(uint32_t)]; |
| break; |
| |
| default: |
| val = pci_default_read_config(d, address, len); |
| break; |
| } |
| |
| return val; |
| } |
| |
| static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr, |
| uint64_t *val, unsigned len) |
| { |
| DesignwarePCIEViewport *viewport = opaque; |
| DesignwarePCIERoot *root = viewport->root; |
| |
| const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target); |
| const uint8_t devfn = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target); |
| PCIBus *pcibus = pci_get_bus(PCI_DEVICE(root)); |
| PCIDevice *pcidev = pci_find_device(pcibus, busnum, devfn); |
| |
| if (pcidev) { |
| addr &= pci_config_size(pcidev) - 1; |
| |
| if (val) { |
| pci_host_config_write_common(pcidev, addr, |
| pci_config_size(pcidev), |
| *val, len); |
| } else { |
| return pci_host_config_read_common(pcidev, addr, |
| pci_config_size(pcidev), |
| len); |
| } |
| } |
| |
| return UINT64_MAX; |
| } |
| |
| static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr, |
| unsigned len) |
| { |
| return designware_pcie_root_data_access(opaque, addr, NULL, len); |
| } |
| |
| static void designware_pcie_root_data_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned len) |
| { |
| designware_pcie_root_data_access(opaque, addr, &val, len); |
| } |
| |
| static const MemoryRegionOps designware_pci_host_conf_ops = { |
| .read = designware_pcie_root_data_read, |
| .write = designware_pcie_root_data_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 1, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static void designware_pcie_update_viewport(DesignwarePCIERoot *root, |
| DesignwarePCIEViewport *viewport) |
| { |
| const uint64_t target = viewport->target; |
| const uint64_t base = viewport->base; |
| const uint64_t size = (uint64_t)viewport->limit - base + 1; |
| const bool enabled = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE; |
| |
| MemoryRegion *current, *other; |
| |
| if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) { |
| current = &viewport->mem; |
| other = &viewport->cfg; |
| memory_region_set_alias_offset(current, target); |
| } else { |
| current = &viewport->cfg; |
| other = &viewport->mem; |
| } |
| |
| /* |
| * An outbound viewport can be reconfigure from being MEM to CFG, |
| * to account for that we disable the "other" memory region that |
| * becomes unused due to that fact. |
| */ |
| memory_region_set_enabled(other, false); |
| if (enabled) { |
| memory_region_set_size(current, size); |
| memory_region_set_address(current, base); |
| } |
| memory_region_set_enabled(current, enabled); |
| } |
| |
| static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, |
| uint32_t val, int len) |
| { |
| DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); |
| DesignwarePCIEHost *host = designware_pcie_root_to_host(root); |
| DesignwarePCIEViewport *viewport = |
| designware_pcie_root_get_current_viewport(root); |
| |
| switch (address) { |
| case DESIGNWARE_PCIE_PORT_LINK_CONTROL: |
| case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: |
| case DESIGNWARE_PCIE_PHY_DEBUG_R1: |
| /* No-op */ |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_ADDR_LO: |
| root->msi.base &= 0xFFFFFFFF00000000ULL; |
| root->msi.base |= val; |
| designware_pcie_root_update_msi_mapping(root); |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_ADDR_HI: |
| root->msi.base &= 0x00000000FFFFFFFFULL; |
| root->msi.base |= (uint64_t)val << 32; |
| designware_pcie_root_update_msi_mapping(root); |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: |
| root->msi.intr[0].enable = val; |
| designware_pcie_root_update_msi_mapping(root); |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_INTR0_MASK: |
| root->msi.intr[0].mask = val; |
| break; |
| |
| case DESIGNWARE_PCIE_MSI_INTR0_STATUS: |
| root->msi.intr[0].status ^= val; |
| if (!root->msi.intr[0].status) { |
| qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0); |
| } |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_VIEWPORT: |
| root->atu_viewport = val; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_LOWER_BASE: |
| viewport->base &= 0xFFFFFFFF00000000ULL; |
| viewport->base |= val; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_UPPER_BASE: |
| viewport->base &= 0x00000000FFFFFFFFULL; |
| viewport->base |= (uint64_t)val << 32; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_LOWER_TARGET: |
| viewport->target &= 0xFFFFFFFF00000000ULL; |
| viewport->target |= val; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_UPPER_TARGET: |
| viewport->target &= 0x00000000FFFFFFFFULL; |
| viewport->target |= val; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_LIMIT: |
| viewport->limit = val; |
| break; |
| |
| case DESIGNWARE_PCIE_ATU_CR1: |
| viewport->cr[0] = val; |
| break; |
| case DESIGNWARE_PCIE_ATU_CR2: |
| viewport->cr[1] = val; |
| designware_pcie_update_viewport(root, viewport); |
| break; |
| |
| default: |
| pci_bridge_write_config(d, address, val, len); |
| break; |
| } |
| } |
| |
| static char *designware_pcie_viewport_name(const char *direction, |
| unsigned int i, |
| const char *type) |
| { |
| return g_strdup_printf("PCI %s Viewport %u [%s]", |
| direction, i, type); |
| } |
| |
| static void designware_pcie_root_realize(PCIDevice *dev, Error **errp) |
| { |
| DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev); |
| DesignwarePCIEHost *host = designware_pcie_root_to_host(root); |
| MemoryRegion *address_space = &host->pci.memory; |
| PCIBridge *br = PCI_BRIDGE(dev); |
| DesignwarePCIEViewport *viewport; |
| /* |
| * Dummy values used for initial configuration of MemoryRegions |
| * that belong to a given viewport |
| */ |
| const hwaddr dummy_offset = 0; |
| const uint64_t dummy_size = 4; |
| size_t i; |
| |
| br->bus_name = "dw-pcie"; |
| |
| pci_set_word(dev->config + PCI_COMMAND, |
| PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
| |
| pci_config_set_interrupt_pin(dev->config, 1); |
| pci_bridge_initfn(dev, TYPE_PCIE_BUS); |
| |
| pcie_port_init_reg(dev); |
| |
| pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT, |
| 0, &error_fatal); |
| |
| msi_nonbroken = true; |
| msi_init(dev, 0x50, 32, true, true, &error_fatal); |
| |
| for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) { |
| MemoryRegion *source, *destination, *mem; |
| const char *direction; |
| char *name; |
| |
| viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i]; |
| viewport->inbound = true; |
| viewport->base = 0x0000000000000000ULL; |
| viewport->target = 0x0000000000000000ULL; |
| viewport->limit = UINT32_MAX; |
| viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; |
| |
| source = &host->pci.address_space_root; |
| destination = get_system_memory(); |
| direction = "Inbound"; |
| |
| /* |
| * Configure MemoryRegion implementing PCI -> CPU memory |
| * access |
| */ |
| mem = &viewport->mem; |
| name = designware_pcie_viewport_name(direction, i, "MEM"); |
| memory_region_init_alias(mem, OBJECT(root), name, destination, |
| dummy_offset, dummy_size); |
| memory_region_add_subregion_overlap(source, dummy_offset, mem, -1); |
| memory_region_set_enabled(mem, false); |
| g_free(name); |
| |
| viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i]; |
| viewport->root = root; |
| viewport->inbound = false; |
| viewport->base = 0x0000000000000000ULL; |
| viewport->target = 0x0000000000000000ULL; |
| viewport->limit = UINT32_MAX; |
| viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; |
| |
| destination = &host->pci.memory; |
| direction = "Outbound"; |
| source = get_system_memory(); |
| |
| /* |
| * Configure MemoryRegion implementing CPU -> PCI memory |
| * access |
| */ |
| mem = &viewport->mem; |
| name = designware_pcie_viewport_name(direction, i, "MEM"); |
| memory_region_init_alias(mem, OBJECT(root), name, destination, |
| dummy_offset, dummy_size); |
| memory_region_add_subregion(source, dummy_offset, mem); |
| memory_region_set_enabled(mem, false); |
| g_free(name); |
| |
| /* |
| * Configure MemoryRegion implementing access to configuration |
| * space |
| */ |
| mem = &viewport->cfg; |
| name = designware_pcie_viewport_name(direction, i, "CFG"); |
| memory_region_init_io(&viewport->cfg, OBJECT(root), |
| &designware_pci_host_conf_ops, |
| viewport, name, dummy_size); |
| memory_region_add_subregion(source, dummy_offset, mem); |
| memory_region_set_enabled(mem, false); |
| g_free(name); |
| } |
| |
| /* |
| * If no inbound iATU windows are configured, HW defaults to |
| * letting inbound TLPs to pass in. We emulate that by exlicitly |
| * configuring first inbound window to cover all of target's |
| * address space. |
| * |
| * NOTE: This will not work correctly for the case when first |
| * configured inbound window is window 0 |
| */ |
| viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0]; |
| viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE; |
| designware_pcie_update_viewport(root, viewport); |
| |
| memory_region_init_io(&root->msi.iomem, OBJECT(root), |
| &designware_pci_host_msi_ops, |
| root, "pcie-msi", 0x4); |
| /* |
| * We initially place MSI interrupt I/O region a adress 0 and |
| * disable it. It'll be later moved to correct offset and enabled |
| * in designware_pcie_root_update_msi_mapping() as a part of |
| * initialization done by guest OS |
| */ |
| memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem); |
| memory_region_set_enabled(&root->msi.iomem, false); |
| } |
| |
| static void designware_pcie_set_irq(void *opaque, int irq_num, int level) |
| { |
| DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque); |
| |
| qemu_set_irq(host->pci.irqs[irq_num], level); |
| } |
| |
| static const char * |
| designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus) |
| { |
| return "0000:00"; |
| } |
| |
| static const VMStateDescription vmstate_designware_pcie_msi_bank = { |
| .name = "designware-pcie-msi-bank", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(enable, DesignwarePCIEMSIBank), |
| VMSTATE_UINT32(mask, DesignwarePCIEMSIBank), |
| VMSTATE_UINT32(status, DesignwarePCIEMSIBank), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_designware_pcie_msi = { |
| .name = "designware-pcie-msi", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT64(base, DesignwarePCIEMSI), |
| VMSTATE_STRUCT_ARRAY(intr, |
| DesignwarePCIEMSI, |
| DESIGNWARE_PCIE_NUM_MSI_BANKS, |
| 1, |
| vmstate_designware_pcie_msi_bank, |
| DesignwarePCIEMSIBank), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_designware_pcie_viewport = { |
| .name = "designware-pcie-viewport", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT64(base, DesignwarePCIEViewport), |
| VMSTATE_UINT64(target, DesignwarePCIEViewport), |
| VMSTATE_UINT32(limit, DesignwarePCIEViewport), |
| VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_designware_pcie_root = { |
| .name = "designware-pcie-root", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_PCI_DEVICE(parent_obj, PCIBridge), |
| VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot), |
| VMSTATE_STRUCT_2DARRAY(viewports, |
| DesignwarePCIERoot, |
| 2, |
| DESIGNWARE_PCIE_NUM_VIEWPORTS, |
| 1, |
| vmstate_designware_pcie_viewport, |
| DesignwarePCIEViewport), |
| VMSTATE_STRUCT(msi, |
| DesignwarePCIERoot, |
| 1, |
| vmstate_designware_pcie_msi, |
| DesignwarePCIEMSI), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void designware_pcie_root_class_init(ObjectClass *klass, void *data) |
| { |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); |
| |
| k->vendor_id = PCI_VENDOR_ID_SYNOPSYS; |
| k->device_id = 0xABCD; |
| k->revision = 0; |
| k->class_id = PCI_CLASS_BRIDGE_PCI; |
| k->is_bridge = true; |
| k->exit = pci_bridge_exitfn; |
| k->realize = designware_pcie_root_realize; |
| k->config_read = designware_pcie_root_config_read; |
| k->config_write = designware_pcie_root_config_write; |
| |
| dc->reset = pci_bridge_reset; |
| /* |
| * PCI-facing part of the host bridge, not usable without the |
| * host-facing part, which can't be device_add'ed, yet. |
| */ |
| dc->user_creatable = false; |
| dc->vmsd = &vmstate_designware_pcie_root; |
| } |
| |
| static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr, |
| unsigned int size) |
| { |
| PCIHostState *pci = PCI_HOST_BRIDGE(opaque); |
| PCIDevice *device = pci_find_device(pci->bus, 0, 0); |
| |
| return pci_host_config_read_common(device, |
| addr, |
| pci_config_size(device), |
| size); |
| } |
| |
| static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned int size) |
| { |
| PCIHostState *pci = PCI_HOST_BRIDGE(opaque); |
| PCIDevice *device = pci_find_device(pci->bus, 0, 0); |
| |
| return pci_host_config_write_common(device, |
| addr, |
| pci_config_size(device), |
| val, size); |
| } |
| |
| static const MemoryRegionOps designware_pci_mmio_ops = { |
| .read = designware_pcie_host_mmio_read, |
| .write = designware_pcie_host_mmio_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .impl = { |
| /* |
| * Our device would not work correctly if the guest was doing |
| * unaligned access. This might not be a limitation on the real |
| * device but in practice there is no reason for a guest to access |
| * this device unaligned. |
| */ |
| .min_access_size = 4, |
| .max_access_size = 4, |
| .unaligned = false, |
| }, |
| }; |
| |
| static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque, |
| int devfn) |
| { |
| DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque); |
| |
| return &s->pci.address_space; |
| } |
| |
| static void designware_pcie_host_realize(DeviceState *dev, Error **errp) |
| { |
| PCIHostState *pci = PCI_HOST_BRIDGE(dev); |
| DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| size_t i; |
| |
| for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) { |
| sysbus_init_irq(sbd, &s->pci.irqs[i]); |
| } |
| |
| memory_region_init_io(&s->mmio, |
| OBJECT(s), |
| &designware_pci_mmio_ops, |
| s, |
| "pcie.reg", 4 * 1024); |
| sysbus_init_mmio(sbd, &s->mmio); |
| |
| memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16); |
| memory_region_init(&s->pci.memory, OBJECT(s), |
| "pcie-bus-memory", |
| UINT64_MAX); |
| |
| pci->bus = pci_register_root_bus(dev, "pcie", |
| designware_pcie_set_irq, |
| pci_swizzle_map_irq_fn, |
| s, |
| &s->pci.memory, |
| &s->pci.io, |
| 0, 4, |
| TYPE_PCIE_BUS); |
| |
| memory_region_init(&s->pci.address_space_root, |
| OBJECT(s), |
| "pcie-bus-address-space-root", |
| UINT64_MAX); |
| memory_region_add_subregion(&s->pci.address_space_root, |
| 0x0, &s->pci.memory); |
| address_space_init(&s->pci.address_space, |
| &s->pci.address_space_root, |
| "pcie-bus-address-space"); |
| pci_setup_iommu(pci->bus, designware_pcie_host_set_iommu, s); |
| |
| qdev_realize(DEVICE(&s->root), BUS(pci->bus), &error_fatal); |
| } |
| |
| static const VMStateDescription vmstate_designware_pcie_host = { |
| .name = "designware-pcie-host", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_STRUCT(root, |
| DesignwarePCIEHost, |
| 1, |
| vmstate_designware_pcie_root, |
| DesignwarePCIERoot), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void designware_pcie_host_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass); |
| |
| hc->root_bus_path = designware_pcie_host_root_bus_path; |
| dc->realize = designware_pcie_host_realize; |
| set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); |
| dc->fw_name = "pci"; |
| dc->vmsd = &vmstate_designware_pcie_host; |
| } |
| |
| static void designware_pcie_host_init(Object *obj) |
| { |
| DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj); |
| DesignwarePCIERoot *root = &s->root; |
| |
| object_initialize_child(obj, "root", root, TYPE_DESIGNWARE_PCIE_ROOT); |
| qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0)); |
| qdev_prop_set_bit(DEVICE(root), "multifunction", false); |
| } |
| |
| static const TypeInfo designware_pcie_root_info = { |
| .name = TYPE_DESIGNWARE_PCIE_ROOT, |
| .parent = TYPE_PCI_BRIDGE, |
| .instance_size = sizeof(DesignwarePCIERoot), |
| .class_init = designware_pcie_root_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_PCIE_DEVICE }, |
| { } |
| }, |
| }; |
| |
| static const TypeInfo designware_pcie_host_info = { |
| .name = TYPE_DESIGNWARE_PCIE_HOST, |
| .parent = TYPE_PCI_HOST_BRIDGE, |
| .instance_size = sizeof(DesignwarePCIEHost), |
| .instance_init = designware_pcie_host_init, |
| .class_init = designware_pcie_host_class_init, |
| }; |
| |
| static void designware_pcie_register(void) |
| { |
| type_register_static(&designware_pcie_root_info); |
| type_register_static(&designware_pcie_host_info); |
| } |
| type_init(designware_pcie_register) |