| /* |
| * LEFI (a UEFI-like interface for BIOS-Kernel boot parameters) data structures |
| * defined at arch/mips/include/asm/mach-loongson64/boot_param.h in Linux kernel |
| * |
| * Copyright (c) 2017-2020 Huacai Chen (chenhc@lemote.com) |
| * Copyright (c) 2017-2020 Jiaxun Yang <jiaxun.yang@flygoat.com> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <https://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef HW_MIPS_LOONGSON3_BOOTP_H |
| #define HW_MIPS_LOONGSON3_BOOTP_H |
| |
| struct efi_memory_map_loongson { |
| uint16_t vers; /* version of efi_memory_map */ |
| uint32_t nr_map; /* number of memory_maps */ |
| uint32_t mem_freq; /* memory frequency */ |
| struct mem_map { |
| uint32_t node_id; /* node_id which memory attached to */ |
| uint32_t mem_type; /* system memory, pci memory, pci io, etc. */ |
| uint64_t mem_start; /* memory map start address */ |
| uint32_t mem_size; /* each memory_map size, not the total size */ |
| } map[128]; |
| } QEMU_PACKED; |
| |
| enum loongson_cpu_type { |
| Legacy_2E = 0x0, |
| Legacy_2F = 0x1, |
| Legacy_3A = 0x2, |
| Legacy_3B = 0x3, |
| Legacy_1A = 0x4, |
| Legacy_1B = 0x5, |
| Legacy_2G = 0x6, |
| Legacy_2H = 0x7, |
| Loongson_1A = 0x100, |
| Loongson_1B = 0x101, |
| Loongson_2E = 0x200, |
| Loongson_2F = 0x201, |
| Loongson_2G = 0x202, |
| Loongson_2H = 0x203, |
| Loongson_3A = 0x300, |
| Loongson_3B = 0x301 |
| }; |
| |
| /* |
| * Capability and feature descriptor structure for MIPS CPU |
| */ |
| struct efi_cpuinfo_loongson { |
| uint16_t vers; /* version of efi_cpuinfo_loongson */ |
| uint32_t processor_id; /* PRID, e.g. 6305, 6306 */ |
| uint32_t cputype; /* Loongson_3A/3B, etc. */ |
| uint32_t total_node; /* num of total numa nodes */ |
| uint16_t cpu_startup_core_id; /* Boot core id */ |
| uint16_t reserved_cores_mask; |
| uint32_t cpu_clock_freq; /* cpu_clock */ |
| uint32_t nr_cpus; |
| char cpuname[64]; |
| } QEMU_PACKED; |
| |
| #define MAX_UARTS 64 |
| struct uart_device { |
| uint32_t iotype; |
| uint32_t uartclk; |
| uint32_t int_offset; |
| uint64_t uart_base; |
| } QEMU_PACKED; |
| |
| #define MAX_SENSORS 64 |
| #define SENSOR_TEMPER 0x00000001 |
| #define SENSOR_VOLTAGE 0x00000002 |
| #define SENSOR_FAN 0x00000004 |
| struct sensor_device { |
| char name[32]; /* a formal name */ |
| char label[64]; /* a flexible description */ |
| uint32_t type; /* SENSOR_* */ |
| uint32_t id; /* instance id of a sensor-class */ |
| uint32_t fan_policy; /* step speed or constant speed */ |
| uint32_t fan_percent;/* only for constant speed policy */ |
| uint64_t base_addr; /* base address of device registers */ |
| } QEMU_PACKED; |
| |
| struct system_loongson { |
| uint16_t vers; /* version of system_loongson */ |
| uint32_t ccnuma_smp; /* 0: no numa; 1: has numa */ |
| uint32_t sing_double_channel;/* 1: single; 2: double */ |
| uint32_t nr_uarts; |
| struct uart_device uarts[MAX_UARTS]; |
| uint32_t nr_sensors; |
| struct sensor_device sensors[MAX_SENSORS]; |
| char has_ec; |
| char ec_name[32]; |
| uint64_t ec_base_addr; |
| char has_tcm; |
| char tcm_name[32]; |
| uint64_t tcm_base_addr; |
| uint64_t workarounds; |
| uint64_t of_dtb_addr; /* NULL if not support */ |
| } QEMU_PACKED; |
| |
| struct irq_source_routing_table { |
| uint16_t vers; |
| uint16_t size; |
| uint16_t rtr_bus; |
| uint16_t rtr_devfn; |
| uint32_t vendor; |
| uint32_t device; |
| uint32_t PIC_type; /* conform use HT or PCI to route to CPU-PIC */ |
| uint64_t ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */ |
| uint64_t ht_enable; /* irqs used in this PIC */ |
| uint32_t node_id; /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */ |
| uint64_t pci_mem_start_addr; |
| uint64_t pci_mem_end_addr; |
| uint64_t pci_io_start_addr; |
| uint64_t pci_io_end_addr; |
| uint64_t pci_config_addr; |
| uint16_t dma_mask_bits; |
| uint16_t dma_noncoherent; |
| } QEMU_PACKED; |
| |
| struct interface_info { |
| uint16_t vers; /* version of the specificition */ |
| uint16_t size; |
| uint8_t flag; |
| char description[64]; |
| } QEMU_PACKED; |
| |
| #define MAX_RESOURCE_NUMBER 128 |
| struct resource_loongson { |
| uint64_t start; /* resource start address */ |
| uint64_t end; /* resource end address */ |
| char name[64]; |
| uint32_t flags; |
| }; |
| |
| struct archdev_data {}; /* arch specific additions */ |
| |
| struct board_devices { |
| char name[64]; /* hold the device name */ |
| uint32_t num_resources; /* number of device_resource */ |
| /* for each device's resource */ |
| struct resource_loongson resource[MAX_RESOURCE_NUMBER]; |
| /* arch specific additions */ |
| struct archdev_data archdata; |
| }; |
| |
| struct loongson_special_attribute { |
| uint16_t vers; /* version of this special */ |
| char special_name[64]; /* special_attribute_name */ |
| uint32_t loongson_special_type; /* type of special device */ |
| /* for each device's resource */ |
| struct resource_loongson resource[MAX_RESOURCE_NUMBER]; |
| }; |
| |
| struct loongson_params { |
| uint64_t memory_offset; /* efi_memory_map_loongson struct offset */ |
| uint64_t cpu_offset; /* efi_cpuinfo_loongson struct offset */ |
| uint64_t system_offset; /* system_loongson struct offset */ |
| uint64_t irq_offset; /* irq_source_routing_table struct offset */ |
| uint64_t interface_offset; /* interface_info struct offset */ |
| uint64_t special_offset; /* loongson_special_attribute struct offset */ |
| uint64_t boarddev_table_offset; /* board_devices offset */ |
| }; |
| |
| struct smbios_tables { |
| uint16_t vers; /* version of smbios */ |
| uint64_t vga_bios; /* vga_bios address */ |
| struct loongson_params lp; |
| }; |
| |
| struct efi_reset_system_t { |
| uint64_t ResetCold; |
| uint64_t ResetWarm; |
| uint64_t ResetType; |
| uint64_t Shutdown; |
| uint64_t DoSuspend; /* NULL if not support */ |
| }; |
| |
| struct efi_loongson { |
| uint64_t mps; /* MPS table */ |
| uint64_t acpi; /* ACPI table (IA64 ext 0.71) */ |
| uint64_t acpi20; /* ACPI table (ACPI 2.0) */ |
| struct smbios_tables smbios; /* SM BIOS table */ |
| uint64_t sal_systab; /* SAL system table */ |
| uint64_t boot_info; /* boot info table */ |
| }; |
| |
| struct boot_params { |
| struct efi_loongson efi; |
| struct efi_reset_system_t reset_system; |
| }; |
| |
| #define LOONGSON3_CORE_PER_NODE 4 |
| |
| /* Overall MMIO & Memory layout */ |
| enum { |
| VIRT_LOWMEM, |
| VIRT_PM, |
| VIRT_FW_CFG, |
| VIRT_RTC, |
| VIRT_PCIE_PIO, |
| VIRT_PCIE_ECAM, |
| VIRT_BIOS_ROM, |
| VIRT_UART, |
| VIRT_LIOINTC, |
| VIRT_IPI, |
| VIRT_PCIE_MMIO, |
| VIRT_HIGHMEM |
| }; |
| |
| /* Low MEM layout for QEMU kernel loader */ |
| enum { |
| LOADER_KERNEL, |
| LOADER_INITRD, |
| LOADER_CMDLINE |
| }; |
| |
| /* BIOS ROM layout for QEMU kernel loader */ |
| enum { |
| LOADER_BOOTROM, |
| LOADER_PARAM, |
| }; |
| |
| extern const MemMapEntry virt_memmap[]; |
| void init_loongson_params(struct loongson_params *lp, void *p, |
| uint64_t cpu_freq, uint64_t ram_size); |
| void init_reset_system(struct efi_reset_system_t *reset); |
| |
| #endif |