| /* |
| * Arm PrimeCell PL041 Advanced Audio Codec Interface |
| * |
| * Copyright (c) 2011 |
| * Written by Mathieu Sonet - www.elasticsheep.com |
| * |
| * This code is licensed under the GPL. |
| * |
| * ***************************************************************** |
| * |
| * This driver emulates the ARM AACI interface |
| * connected to a LM4549 codec. |
| * |
| * Limitations: |
| * - Supports only a playback on one channel (Versatile/Vexpress) |
| * - Supports only one TX FIFO in compact-mode or non-compact mode. |
| * - Supports playback of 12, 16, 18 and 20 bits samples. |
| * - Record is not supported. |
| * - The PL041 is hardwired to a LM4549 codec. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/irq.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/sysbus.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| |
| #include "pl041.h" |
| #include "lm4549.h" |
| #include "migration/vmstate.h" |
| #include "qom/object.h" |
| |
| #if 0 |
| #define PL041_DEBUG_LEVEL 1 |
| #endif |
| |
| #if defined(PL041_DEBUG_LEVEL) && (PL041_DEBUG_LEVEL >= 1) |
| #define DBG_L1(fmt, ...) \ |
| do { printf("pl041: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DBG_L1(fmt, ...) \ |
| do { } while (0) |
| #endif |
| |
| #if defined(PL041_DEBUG_LEVEL) && (PL041_DEBUG_LEVEL >= 2) |
| #define DBG_L2(fmt, ...) \ |
| do { printf("pl041: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DBG_L2(fmt, ...) \ |
| do { } while (0) |
| #endif |
| |
| |
| #define MAX_FIFO_DEPTH (1024) |
| #define DEFAULT_FIFO_DEPTH (8) |
| |
| #define SLOT1_RW (1 << 19) |
| |
| /* This FIFO only stores 20-bit samples on 32-bit words. |
| So its level is independent of the selected mode */ |
| typedef struct { |
| uint32_t level; |
| uint32_t data[MAX_FIFO_DEPTH]; |
| } pl041_fifo; |
| |
| typedef struct { |
| pl041_fifo tx_fifo; |
| uint8_t tx_enabled; |
| uint8_t tx_compact_mode; |
| uint8_t tx_sample_size; |
| |
| pl041_fifo rx_fifo; |
| uint8_t rx_enabled; |
| uint8_t rx_compact_mode; |
| uint8_t rx_sample_size; |
| } pl041_channel; |
| |
| #define TYPE_PL041 "pl041" |
| OBJECT_DECLARE_SIMPLE_TYPE(PL041State, PL041) |
| |
| struct PL041State { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| qemu_irq irq; |
| |
| uint32_t fifo_depth; /* FIFO depth in non-compact mode */ |
| |
| pl041_regfile regs; |
| pl041_channel fifo1; |
| lm4549_state codec; |
| }; |
| |
| |
| static const unsigned char pl041_default_id[8] = { |
| 0x41, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 |
| }; |
| |
| #if defined(PL041_DEBUG_LEVEL) |
| #define REGISTER(name, offset) #name, |
| static const char *pl041_regs_name[] = { |
| #include "pl041.hx" |
| }; |
| #undef REGISTER |
| #endif |
| |
| |
| #if defined(PL041_DEBUG_LEVEL) |
| static const char *get_reg_name(hwaddr offset) |
| { |
| if (offset <= PL041_dr1_7) { |
| return pl041_regs_name[offset >> 2]; |
| } |
| |
| return "unknown"; |
| } |
| #endif |
| |
| static uint8_t pl041_compute_periphid3(PL041State *s) |
| { |
| uint8_t id3 = 1; /* One channel */ |
| |
| /* Add the fifo depth information */ |
| switch (s->fifo_depth) { |
| case 8: |
| id3 |= 0 << 3; |
| break; |
| case 32: |
| id3 |= 1 << 3; |
| break; |
| case 64: |
| id3 |= 2 << 3; |
| break; |
| case 128: |
| id3 |= 3 << 3; |
| break; |
| case 256: |
| id3 |= 4 << 3; |
| break; |
| case 512: |
| id3 |= 5 << 3; |
| break; |
| case 1024: |
| id3 |= 6 << 3; |
| break; |
| case 2048: |
| id3 |= 7 << 3; |
| break; |
| } |
| |
| return id3; |
| } |
| |
| static void pl041_reset(PL041State *s) |
| { |
| DBG_L1("pl041_reset\n"); |
| |
| memset(&s->regs, 0x00, sizeof(pl041_regfile)); |
| |
| s->regs.slfr = SL1TXEMPTY | SL2TXEMPTY | SL12TXEMPTY; |
| s->regs.sr1 = TXFE | RXFE | TXHE; |
| s->regs.isr1 = 0; |
| |
| memset(&s->fifo1, 0x00, sizeof(s->fifo1)); |
| } |
| |
| |
| static void pl041_fifo1_write(PL041State *s, uint32_t value) |
| { |
| pl041_channel *channel = &s->fifo1; |
| pl041_fifo *fifo = &s->fifo1.tx_fifo; |
| |
| /* Push the value in the FIFO */ |
| if (channel->tx_compact_mode == 0) { |
| /* Non-compact mode */ |
| |
| if (fifo->level < s->fifo_depth) { |
| /* Pad the value with 0 to obtain a 20-bit sample */ |
| switch (channel->tx_sample_size) { |
| case 12: |
| value = (value << 8) & 0xFFFFF; |
| break; |
| case 16: |
| value = (value << 4) & 0xFFFFF; |
| break; |
| case 18: |
| value = (value << 2) & 0xFFFFF; |
| break; |
| case 20: |
| default: |
| break; |
| } |
| |
| /* Store the sample in the FIFO */ |
| fifo->data[fifo->level++] = value; |
| } |
| #if defined(PL041_DEBUG_LEVEL) |
| else { |
| DBG_L1("fifo1 write: overrun\n"); |
| } |
| #endif |
| } else { |
| /* Compact mode */ |
| |
| if ((fifo->level + 2) < s->fifo_depth) { |
| uint32_t i = 0; |
| uint32_t sample = 0; |
| |
| for (i = 0; i < 2; i++) { |
| sample = value & 0xFFFF; |
| value = value >> 16; |
| |
| /* Pad each sample with 0 to obtain a 20-bit sample */ |
| switch (channel->tx_sample_size) { |
| case 12: |
| sample = sample << 8; |
| break; |
| case 16: |
| default: |
| sample = sample << 4; |
| break; |
| } |
| |
| /* Store the sample in the FIFO */ |
| fifo->data[fifo->level++] = sample; |
| } |
| } |
| #if defined(PL041_DEBUG_LEVEL) |
| else { |
| DBG_L1("fifo1 write: overrun\n"); |
| } |
| #endif |
| } |
| |
| /* Update the status register */ |
| if (fifo->level > 0) { |
| s->regs.sr1 &= ~(TXUNDERRUN | TXFE); |
| } |
| |
| if (fifo->level >= (s->fifo_depth / 2)) { |
| s->regs.sr1 &= ~TXHE; |
| } |
| |
| if (fifo->level >= s->fifo_depth) { |
| s->regs.sr1 |= TXFF; |
| } |
| |
| DBG_L2("fifo1_push sr1 = 0x%08x\n", s->regs.sr1); |
| } |
| |
| static void pl041_fifo1_transmit(PL041State *s) |
| { |
| pl041_channel *channel = &s->fifo1; |
| pl041_fifo *fifo = &s->fifo1.tx_fifo; |
| uint32_t slots = s->regs.txcr1 & TXSLOT_MASK; |
| uint32_t written_samples; |
| |
| /* Check if FIFO1 transmit is enabled */ |
| if ((channel->tx_enabled) && (slots & (TXSLOT3 | TXSLOT4))) { |
| if (fifo->level >= (s->fifo_depth / 2)) { |
| int i; |
| |
| DBG_L1("Transfer FIFO level = %i\n", fifo->level); |
| |
| /* Try to transfer the whole FIFO */ |
| for (i = 0; i < (fifo->level / 2); i++) { |
| uint32_t left = fifo->data[i * 2]; |
| uint32_t right = fifo->data[i * 2 + 1]; |
| |
| /* Transmit two 20-bit samples to the codec */ |
| if (lm4549_write_samples(&s->codec, left, right) == 0) { |
| DBG_L1("Codec buffer full\n"); |
| break; |
| } |
| } |
| |
| written_samples = i * 2; |
| if (written_samples > 0) { |
| /* Update the FIFO level */ |
| fifo->level -= written_samples; |
| |
| /* Move back the pending samples to the start of the FIFO */ |
| for (i = 0; i < fifo->level; i++) { |
| fifo->data[i] = fifo->data[written_samples + i]; |
| } |
| |
| /* Update the status register */ |
| s->regs.sr1 &= ~TXFF; |
| |
| if (fifo->level <= (s->fifo_depth / 2)) { |
| s->regs.sr1 |= TXHE; |
| } |
| |
| if (fifo->level == 0) { |
| s->regs.sr1 |= TXFE | TXUNDERRUN; |
| DBG_L1("Empty FIFO\n"); |
| } |
| } |
| } |
| } |
| } |
| |
| static void pl041_isr1_update(PL041State *s) |
| { |
| /* Update ISR1 */ |
| if (s->regs.sr1 & TXUNDERRUN) { |
| s->regs.isr1 |= URINTR; |
| } else { |
| s->regs.isr1 &= ~URINTR; |
| } |
| |
| if (s->regs.sr1 & TXHE) { |
| s->regs.isr1 |= TXINTR; |
| } else { |
| s->regs.isr1 &= ~TXINTR; |
| } |
| |
| if (!(s->regs.sr1 & TXBUSY) && (s->regs.sr1 & TXFE)) { |
| s->regs.isr1 |= TXCINTR; |
| } else { |
| s->regs.isr1 &= ~TXCINTR; |
| } |
| |
| /* Update the irq state */ |
| qemu_set_irq(s->irq, ((s->regs.isr1 & s->regs.ie1) > 0) ? 1 : 0); |
| DBG_L2("Set interrupt sr1 = 0x%08x isr1 = 0x%08x masked = 0x%08x\n", |
| s->regs.sr1, s->regs.isr1, s->regs.isr1 & s->regs.ie1); |
| } |
| |
| static void pl041_request_data(void *opaque) |
| { |
| PL041State *s = (PL041State *)opaque; |
| |
| /* Trigger pending transfers */ |
| pl041_fifo1_transmit(s); |
| pl041_isr1_update(s); |
| } |
| |
| static uint64_t pl041_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| PL041State *s = (PL041State *)opaque; |
| int value; |
| |
| if ((offset >= PL041_periphid0) && (offset <= PL041_pcellid3)) { |
| if (offset == PL041_periphid3) { |
| value = pl041_compute_periphid3(s); |
| } else { |
| value = pl041_default_id[(offset - PL041_periphid0) >> 2]; |
| } |
| |
| DBG_L1("pl041_read [0x%08x] => 0x%08x\n", offset, value); |
| return value; |
| } else if (offset <= PL041_dr4_7) { |
| value = *((uint32_t *)&s->regs + (offset >> 2)); |
| } else { |
| DBG_L1("pl041_read: Reserved offset %x\n", (int)offset); |
| return 0; |
| } |
| |
| switch (offset) { |
| case PL041_allints: |
| value = s->regs.isr1 & 0x7F; |
| break; |
| } |
| |
| DBG_L1("pl041_read [0x%08x] %s => 0x%08x\n", offset, |
| get_reg_name(offset), value); |
| |
| return value; |
| } |
| |
| static void pl041_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| PL041State *s = (PL041State *)opaque; |
| uint16_t control, data; |
| uint32_t result; |
| |
| DBG_L1("pl041_write [0x%08x] %s <= 0x%08x\n", offset, |
| get_reg_name(offset), (unsigned int)value); |
| |
| /* Write the register */ |
| if (offset <= PL041_dr4_7) { |
| *((uint32_t *)&s->regs + (offset >> 2)) = value; |
| } else { |
| DBG_L1("pl041_write: Reserved offset %x\n", (int)offset); |
| return; |
| } |
| |
| /* Execute the actions */ |
| switch (offset) { |
| case PL041_txcr1: |
| { |
| pl041_channel *channel = &s->fifo1; |
| |
| uint32_t txen = s->regs.txcr1 & TXEN; |
| uint32_t tsize = (s->regs.txcr1 & TSIZE_MASK) >> TSIZE_MASK_BIT; |
| uint32_t compact_mode = (s->regs.txcr1 & TXCOMPACT) ? 1 : 0; |
| #if defined(PL041_DEBUG_LEVEL) |
| uint32_t slots = (s->regs.txcr1 & TXSLOT_MASK) >> TXSLOT_MASK_BIT; |
| uint32_t txfen = (s->regs.txcr1 & TXFEN) > 0 ? 1 : 0; |
| #endif |
| |
| DBG_L1("=> txen = %i slots = 0x%01x tsize = %i compact = %i " |
| "txfen = %i\n", txen, slots, tsize, compact_mode, txfen); |
| |
| channel->tx_enabled = txen; |
| channel->tx_compact_mode = compact_mode; |
| |
| switch (tsize) { |
| case 0: |
| channel->tx_sample_size = 16; |
| break; |
| case 1: |
| channel->tx_sample_size = 18; |
| break; |
| case 2: |
| channel->tx_sample_size = 20; |
| break; |
| case 3: |
| channel->tx_sample_size = 12; |
| break; |
| } |
| |
| DBG_L1("TX enabled = %i\n", channel->tx_enabled); |
| DBG_L1("TX compact mode = %i\n", channel->tx_compact_mode); |
| DBG_L1("TX sample width = %i\n", channel->tx_sample_size); |
| |
| /* Check if compact mode is allowed with selected tsize */ |
| if (channel->tx_compact_mode == 1) { |
| if ((channel->tx_sample_size == 18) || |
| (channel->tx_sample_size == 20)) { |
| channel->tx_compact_mode = 0; |
| DBG_L1("Compact mode not allowed with 18/20-bit sample size\n"); |
| } |
| } |
| |
| break; |
| } |
| case PL041_sl1tx: |
| s->regs.slfr &= ~SL1TXEMPTY; |
| |
| control = (s->regs.sl1tx >> 12) & 0x7F; |
| data = (s->regs.sl2tx >> 4) & 0xFFFF; |
| |
| if ((s->regs.sl1tx & SLOT1_RW) == 0) { |
| /* Write operation */ |
| lm4549_write(&s->codec, control, data); |
| } else { |
| /* Read operation */ |
| result = lm4549_read(&s->codec, control); |
| |
| /* Store the returned value */ |
| s->regs.sl1rx = s->regs.sl1tx & ~SLOT1_RW; |
| s->regs.sl2rx = result << 4; |
| |
| s->regs.slfr &= ~(SL1RXBUSY | SL2RXBUSY); |
| s->regs.slfr |= SL1RXVALID | SL2RXVALID; |
| } |
| break; |
| |
| case PL041_sl2tx: |
| s->regs.sl2tx = value; |
| s->regs.slfr &= ~SL2TXEMPTY; |
| break; |
| |
| case PL041_intclr: |
| DBG_L1("=> Clear interrupt intclr = 0x%08x isr1 = 0x%08x\n", |
| s->regs.intclr, s->regs.isr1); |
| |
| if (s->regs.intclr & TXUEC1) { |
| s->regs.sr1 &= ~TXUNDERRUN; |
| } |
| break; |
| |
| case PL041_maincr: |
| { |
| #if defined(PL041_DEBUG_LEVEL) |
| char debug[] = " AACIFE SL1RXEN SL1TXEN"; |
| if (!(value & AACIFE)) { |
| debug[0] = '!'; |
| } |
| if (!(value & SL1RXEN)) { |
| debug[8] = '!'; |
| } |
| if (!(value & SL1TXEN)) { |
| debug[17] = '!'; |
| } |
| DBG_L1("%s\n", debug); |
| #endif |
| |
| if ((s->regs.maincr & AACIFE) == 0) { |
| pl041_reset(s); |
| } |
| break; |
| } |
| |
| case PL041_dr1_0: |
| case PL041_dr1_1: |
| case PL041_dr1_2: |
| case PL041_dr1_3: |
| pl041_fifo1_write(s, value); |
| break; |
| } |
| |
| /* Transmit the FIFO content */ |
| pl041_fifo1_transmit(s); |
| |
| /* Update the ISR1 register */ |
| pl041_isr1_update(s); |
| } |
| |
| static void pl041_device_reset(DeviceState *d) |
| { |
| PL041State *s = PL041(d); |
| |
| pl041_reset(s); |
| } |
| |
| static const MemoryRegionOps pl041_ops = { |
| .read = pl041_read, |
| .write = pl041_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void pl041_init(Object *obj) |
| { |
| SysBusDevice *dev = SYS_BUS_DEVICE(obj); |
| PL041State *s = PL041(dev); |
| |
| DBG_L1("pl041_init 0x%08x\n", (uint32_t)s); |
| |
| /* Connect the device to the sysbus */ |
| memory_region_init_io(&s->iomem, obj, &pl041_ops, s, "pl041", 0x1000); |
| sysbus_init_mmio(dev, &s->iomem); |
| sysbus_init_irq(dev, &s->irq); |
| } |
| |
| static void pl041_realize(DeviceState *dev, Error **errp) |
| { |
| PL041State *s = PL041(dev); |
| |
| /* Check the device properties */ |
| switch (s->fifo_depth) { |
| case 8: |
| case 32: |
| case 64: |
| case 128: |
| case 256: |
| case 512: |
| case 1024: |
| case 2048: |
| break; |
| case 16: |
| default: |
| /* NC FIFO depth of 16 is not allowed because its id bits in |
| AACIPERIPHID3 overlap with the id for the default NC FIFO depth */ |
| qemu_log_mask(LOG_UNIMP, |
| "pl041: unsupported non-compact fifo depth [%i]\n", |
| s->fifo_depth); |
| } |
| |
| /* Init the codec */ |
| lm4549_init(&s->codec, &pl041_request_data, (void *)s, errp); |
| } |
| |
| static const VMStateDescription vmstate_pl041_regfile = { |
| .name = "pl041_regfile", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| #define REGISTER(name, offset) VMSTATE_UINT32(name, pl041_regfile), |
| #include "pl041.hx" |
| #undef REGISTER |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_pl041_fifo = { |
| .name = "pl041_fifo", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32(level, pl041_fifo), |
| VMSTATE_UINT32_ARRAY(data, pl041_fifo, MAX_FIFO_DEPTH), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_pl041_channel = { |
| .name = "pl041_channel", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_STRUCT(tx_fifo, pl041_channel, 0, |
| vmstate_pl041_fifo, pl041_fifo), |
| VMSTATE_UINT8(tx_enabled, pl041_channel), |
| VMSTATE_UINT8(tx_compact_mode, pl041_channel), |
| VMSTATE_UINT8(tx_sample_size, pl041_channel), |
| VMSTATE_STRUCT(rx_fifo, pl041_channel, 0, |
| vmstate_pl041_fifo, pl041_fifo), |
| VMSTATE_UINT8(rx_enabled, pl041_channel), |
| VMSTATE_UINT8(rx_compact_mode, pl041_channel), |
| VMSTATE_UINT8(rx_sample_size, pl041_channel), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_pl041 = { |
| .name = "pl041", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32(fifo_depth, PL041State), |
| VMSTATE_STRUCT(regs, PL041State, 0, |
| vmstate_pl041_regfile, pl041_regfile), |
| VMSTATE_STRUCT(fifo1, PL041State, 0, |
| vmstate_pl041_channel, pl041_channel), |
| VMSTATE_STRUCT(codec, PL041State, 0, |
| vmstate_lm4549_state, lm4549_state), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property pl041_device_properties[] = { |
| DEFINE_AUDIO_PROPERTIES(PL041State, codec.card), |
| /* Non-compact FIFO depth property */ |
| DEFINE_PROP_UINT32("nc_fifo_depth", PL041State, fifo_depth, |
| DEFAULT_FIFO_DEPTH), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void pl041_device_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = pl041_realize; |
| set_bit(DEVICE_CATEGORY_SOUND, dc->categories); |
| dc->reset = pl041_device_reset; |
| dc->vmsd = &vmstate_pl041; |
| device_class_set_props(dc, pl041_device_properties); |
| } |
| |
| static const TypeInfo pl041_device_info = { |
| .name = TYPE_PL041, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(PL041State), |
| .instance_init = pl041_init, |
| .class_init = pl041_device_class_init, |
| }; |
| |
| static void pl041_register_types(void) |
| { |
| type_register_static(&pl041_device_info); |
| } |
| |
| type_init(pl041_register_types) |