| /* |
| * OneNAND flash memories emulation. |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Written by Andrzej Zaborowski <andrew@openedhand.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include "qemu-common.h" |
| #include "flash.h" |
| #include "irq.h" |
| #include "sysemu.h" |
| #include "block.h" |
| |
| /* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */ |
| #define PAGE_SHIFT 11 |
| |
| /* Fixed */ |
| #define BLOCK_SHIFT (PAGE_SHIFT + 6) |
| |
| struct onenand_s { |
| uint32_t id; |
| int shift; |
| target_phys_addr_t base; |
| qemu_irq intr; |
| qemu_irq rdy; |
| BlockDriverState *bdrv; |
| BlockDriverState *bdrv_cur; |
| uint8_t *image; |
| uint8_t *otp; |
| uint8_t *current; |
| ram_addr_t ram; |
| uint8_t *boot[2]; |
| uint8_t *data[2][2]; |
| int iomemtype; |
| int cycle; |
| int otpmode; |
| |
| uint16_t addr[8]; |
| uint16_t unladdr[8]; |
| int bufaddr; |
| int count; |
| uint16_t command; |
| uint16_t config[2]; |
| uint16_t status; |
| uint16_t intstatus; |
| uint16_t wpstatus; |
| |
| struct ecc_state_s ecc; |
| |
| int density_mask; |
| int secs; |
| int secs_cur; |
| int blocks; |
| uint8_t *blockwp; |
| }; |
| |
| enum { |
| ONEN_BUF_BLOCK = 0, |
| ONEN_BUF_BLOCK2 = 1, |
| ONEN_BUF_DEST_BLOCK = 2, |
| ONEN_BUF_DEST_PAGE = 3, |
| ONEN_BUF_PAGE = 7, |
| }; |
| |
| enum { |
| ONEN_ERR_CMD = 1 << 10, |
| ONEN_ERR_ERASE = 1 << 11, |
| ONEN_ERR_PROG = 1 << 12, |
| ONEN_ERR_LOAD = 1 << 13, |
| }; |
| |
| enum { |
| ONEN_INT_RESET = 1 << 4, |
| ONEN_INT_ERASE = 1 << 5, |
| ONEN_INT_PROG = 1 << 6, |
| ONEN_INT_LOAD = 1 << 7, |
| ONEN_INT = 1 << 15, |
| }; |
| |
| enum { |
| ONEN_LOCK_LOCKTIGHTEN = 1 << 0, |
| ONEN_LOCK_LOCKED = 1 << 1, |
| ONEN_LOCK_UNLOCKED = 1 << 2, |
| }; |
| |
| void onenand_base_update(void *opaque, target_phys_addr_t new) |
| { |
| struct onenand_s *s = (struct onenand_s *) opaque; |
| |
| s->base = new; |
| |
| /* XXX: We should use IO_MEM_ROMD but we broke it earlier... |
| * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to |
| * write boot commands. Also take note of the BWPS bit. */ |
| cpu_register_physical_memory(s->base + (0x0000 << s->shift), |
| 0x0200 << s->shift, s->iomemtype); |
| cpu_register_physical_memory(s->base + (0x0200 << s->shift), |
| 0xbe00 << s->shift, |
| (s->ram +(0x0200 << s->shift)) | IO_MEM_RAM); |
| if (s->iomemtype) |
| cpu_register_physical_memory(s->base + (0xc000 << s->shift), |
| 0x4000 << s->shift, s->iomemtype); |
| } |
| |
| void onenand_base_unmap(void *opaque) |
| { |
| struct onenand_s *s = (struct onenand_s *) opaque; |
| |
| cpu_register_physical_memory(s->base, |
| 0x10000 << s->shift, IO_MEM_UNASSIGNED); |
| } |
| |
| static void onenand_intr_update(struct onenand_s *s) |
| { |
| qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1); |
| } |
| |
| /* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */ |
| static void onenand_reset(struct onenand_s *s, int cold) |
| { |
| memset(&s->addr, 0, sizeof(s->addr)); |
| s->command = 0; |
| s->count = 1; |
| s->bufaddr = 0; |
| s->config[0] = 0x40c0; |
| s->config[1] = 0x0000; |
| onenand_intr_update(s); |
| qemu_irq_raise(s->rdy); |
| s->status = 0x0000; |
| s->intstatus = cold ? 0x8080 : 0x8010; |
| s->unladdr[0] = 0; |
| s->unladdr[1] = 0; |
| s->wpstatus = 0x0002; |
| s->cycle = 0; |
| s->otpmode = 0; |
| s->bdrv_cur = s->bdrv; |
| s->current = s->image; |
| s->secs_cur = s->secs; |
| |
| if (cold) { |
| /* Lock the whole flash */ |
| memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks); |
| |
| if (s->bdrv && bdrv_read(s->bdrv, 0, s->boot[0], 8) < 0) |
| cpu_abort(cpu_single_env, "%s: Loading the BootRAM failed.\n", |
| __FUNCTION__); |
| } |
| } |
| |
| static inline int onenand_load_main(struct onenand_s *s, int sec, int secn, |
| void *dest) |
| { |
| if (s->bdrv_cur) |
| return bdrv_read(s->bdrv_cur, sec, dest, secn) < 0; |
| else if (sec + secn > s->secs_cur) |
| return 1; |
| |
| memcpy(dest, s->current + (sec << 9), secn << 9); |
| |
| return 0; |
| } |
| |
| static inline int onenand_prog_main(struct onenand_s *s, int sec, int secn, |
| void *src) |
| { |
| if (s->bdrv_cur) |
| return bdrv_write(s->bdrv_cur, sec, src, secn) < 0; |
| else if (sec + secn > s->secs_cur) |
| return 1; |
| |
| memcpy(s->current + (sec << 9), src, secn << 9); |
| |
| return 0; |
| } |
| |
| static inline int onenand_load_spare(struct onenand_s *s, int sec, int secn, |
| void *dest) |
| { |
| uint8_t buf[512]; |
| |
| if (s->bdrv_cur) { |
| if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0) |
| return 1; |
| memcpy(dest, buf + ((sec & 31) << 4), secn << 4); |
| } else if (sec + secn > s->secs_cur) |
| return 1; |
| else |
| memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4); |
| |
| return 0; |
| } |
| |
| static inline int onenand_prog_spare(struct onenand_s *s, int sec, int secn, |
| void *src) |
| { |
| uint8_t buf[512]; |
| |
| if (s->bdrv_cur) { |
| if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0) |
| return 1; |
| memcpy(buf + ((sec & 31) << 4), src, secn << 4); |
| return bdrv_write(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0; |
| } else if (sec + secn > s->secs_cur) |
| return 1; |
| |
| memcpy(s->current + (s->secs_cur << 9) + (sec << 4), src, secn << 4); |
| |
| return 0; |
| } |
| |
| static inline int onenand_erase(struct onenand_s *s, int sec, int num) |
| { |
| /* TODO: optimise */ |
| uint8_t buf[512]; |
| |
| memset(buf, 0xff, sizeof(buf)); |
| for (; num > 0; num --, sec ++) { |
| if (onenand_prog_main(s, sec, 1, buf)) |
| return 1; |
| if (onenand_prog_spare(s, sec, 1, buf)) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void onenand_command(struct onenand_s *s, int cmd) |
| { |
| int b; |
| int sec; |
| void *buf; |
| #define SETADDR(block, page) \ |
| sec = (s->addr[page] & 3) + \ |
| ((((s->addr[page] >> 2) & 0x3f) + \ |
| (((s->addr[block] & 0xfff) | \ |
| (s->addr[block] >> 15 ? \ |
| s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9)); |
| #define SETBUF_M() \ |
| buf = (s->bufaddr & 8) ? \ |
| s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0]; \ |
| buf += (s->bufaddr & 3) << 9; |
| #define SETBUF_S() \ |
| buf = (s->bufaddr & 8) ? \ |
| s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1]; \ |
| buf += (s->bufaddr & 3) << 4; |
| |
| switch (cmd) { |
| case 0x00: /* Load single/multiple sector data unit into buffer */ |
| SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE) |
| |
| SETBUF_M() |
| if (onenand_load_main(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD; |
| |
| #if 0 |
| SETBUF_S() |
| if (onenand_load_spare(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD; |
| #endif |
| |
| /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages) |
| * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages) |
| * then we need two split the read/write into two chunks. |
| */ |
| s->intstatus |= ONEN_INT | ONEN_INT_LOAD; |
| break; |
| case 0x13: /* Load single/multiple spare sector into buffer */ |
| SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE) |
| |
| SETBUF_S() |
| if (onenand_load_spare(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD; |
| |
| /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages) |
| * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages) |
| * then we need two split the read/write into two chunks. |
| */ |
| s->intstatus |= ONEN_INT | ONEN_INT_LOAD; |
| break; |
| case 0x80: /* Program single/multiple sector data unit from buffer */ |
| SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE) |
| |
| SETBUF_M() |
| if (onenand_prog_main(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG; |
| |
| #if 0 |
| SETBUF_S() |
| if (onenand_prog_spare(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG; |
| #endif |
| |
| /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages) |
| * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages) |
| * then we need two split the read/write into two chunks. |
| */ |
| s->intstatus |= ONEN_INT | ONEN_INT_PROG; |
| break; |
| case 0x1a: /* Program single/multiple spare area sector from buffer */ |
| SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE) |
| |
| SETBUF_S() |
| if (onenand_prog_spare(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG; |
| |
| /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages) |
| * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages) |
| * then we need two split the read/write into two chunks. |
| */ |
| s->intstatus |= ONEN_INT | ONEN_INT_PROG; |
| break; |
| case 0x1b: /* Copy-back program */ |
| SETBUF_S() |
| |
| SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE) |
| if (onenand_load_main(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG; |
| |
| SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE) |
| if (onenand_prog_main(s, sec, s->count, buf)) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG; |
| |
| /* TODO: spare areas */ |
| |
| s->intstatus |= ONEN_INT | ONEN_INT_PROG; |
| break; |
| |
| case 0x23: /* Unlock NAND array block(s) */ |
| s->intstatus |= ONEN_INT; |
| |
| /* XXX the previous (?) area should be locked automatically */ |
| for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) { |
| if (b >= s->blocks) { |
| s->status |= ONEN_ERR_CMD; |
| break; |
| } |
| if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN) |
| break; |
| |
| s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED; |
| } |
| break; |
| case 0x2a: /* Lock NAND array block(s) */ |
| s->intstatus |= ONEN_INT; |
| |
| for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) { |
| if (b >= s->blocks) { |
| s->status |= ONEN_ERR_CMD; |
| break; |
| } |
| if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN) |
| break; |
| |
| s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED; |
| } |
| break; |
| case 0x2c: /* Lock-tight NAND array block(s) */ |
| s->intstatus |= ONEN_INT; |
| |
| for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) { |
| if (b >= s->blocks) { |
| s->status |= ONEN_ERR_CMD; |
| break; |
| } |
| if (s->blockwp[b] == ONEN_LOCK_UNLOCKED) |
| continue; |
| |
| s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN; |
| } |
| break; |
| |
| case 0x71: /* Erase-Verify-Read */ |
| s->intstatus |= ONEN_INT; |
| break; |
| case 0x95: /* Multi-block erase */ |
| qemu_irq_pulse(s->intr); |
| /* Fall through. */ |
| case 0x94: /* Block erase */ |
| sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) | |
| (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0)) |
| << (BLOCK_SHIFT - 9); |
| if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9))) |
| s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE; |
| |
| s->intstatus |= ONEN_INT | ONEN_INT_ERASE; |
| break; |
| case 0xb0: /* Erase suspend */ |
| break; |
| case 0x30: /* Erase resume */ |
| s->intstatus |= ONEN_INT | ONEN_INT_ERASE; |
| break; |
| |
| case 0xf0: /* Reset NAND Flash core */ |
| onenand_reset(s, 0); |
| break; |
| case 0xf3: /* Reset OneNAND */ |
| onenand_reset(s, 0); |
| break; |
| |
| case 0x65: /* OTP Access */ |
| s->intstatus |= ONEN_INT; |
| s->bdrv_cur = 0; |
| s->current = s->otp; |
| s->secs_cur = 1 << (BLOCK_SHIFT - 9); |
| s->addr[ONEN_BUF_BLOCK] = 0; |
| s->otpmode = 1; |
| break; |
| |
| default: |
| s->status |= ONEN_ERR_CMD; |
| s->intstatus |= ONEN_INT; |
| fprintf(stderr, "%s: unknown OneNAND command %x\n", |
| __FUNCTION__, cmd); |
| } |
| |
| onenand_intr_update(s); |
| } |
| |
| static uint32_t onenand_read(void *opaque, target_phys_addr_t addr) |
| { |
| struct onenand_s *s = (struct onenand_s *) opaque; |
| int offset = (addr - s->base) >> s->shift; |
| |
| switch (offset) { |
| case 0x0000 ... 0xc000: |
| return lduw_le_p(s->boot[0] + (addr - s->base)); |
| |
| case 0xf000: /* Manufacturer ID */ |
| return (s->id >> 16) & 0xff; |
| case 0xf001: /* Device ID */ |
| return (s->id >> 8) & 0xff; |
| /* TODO: get the following values from a real chip! */ |
| case 0xf002: /* Version ID */ |
| return (s->id >> 0) & 0xff; |
| case 0xf003: /* Data Buffer size */ |
| return 1 << PAGE_SHIFT; |
| case 0xf004: /* Boot Buffer size */ |
| return 0x200; |
| case 0xf005: /* Amount of buffers */ |
| return 1 | (2 << 8); |
| case 0xf006: /* Technology */ |
| return 0; |
| |
| case 0xf100 ... 0xf107: /* Start addresses */ |
| return s->addr[offset - 0xf100]; |
| |
| case 0xf200: /* Start buffer */ |
| return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10))); |
| |
| case 0xf220: /* Command */ |
| return s->command; |
| case 0xf221: /* System Configuration 1 */ |
| return s->config[0] & 0xffe0; |
| case 0xf222: /* System Configuration 2 */ |
| return s->config[1]; |
| |
| case 0xf240: /* Controller Status */ |
| return s->status; |
| case 0xf241: /* Interrupt */ |
| return s->intstatus; |
| case 0xf24c: /* Unlock Start Block Address */ |
| return s->unladdr[0]; |
| case 0xf24d: /* Unlock End Block Address */ |
| return s->unladdr[1]; |
| case 0xf24e: /* Write Protection Status */ |
| return s->wpstatus; |
| |
| case 0xff00: /* ECC Status */ |
| return 0x00; |
| case 0xff01: /* ECC Result of main area data */ |
| case 0xff02: /* ECC Result of spare area data */ |
| case 0xff03: /* ECC Result of main area data */ |
| case 0xff04: /* ECC Result of spare area data */ |
| cpu_abort(cpu_single_env, "%s: imeplement ECC\n", __FUNCTION__); |
| return 0x0000; |
| } |
| |
| fprintf(stderr, "%s: unknown OneNAND register %x\n", |
| __FUNCTION__, offset); |
| return 0; |
| } |
| |
| static void onenand_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct onenand_s *s = (struct onenand_s *) opaque; |
| int offset = (addr - s->base) >> s->shift; |
| int sec; |
| |
| switch (offset) { |
| case 0x0000 ... 0x01ff: |
| case 0x8000 ... 0x800f: |
| if (s->cycle) { |
| s->cycle = 0; |
| |
| if (value == 0x0000) { |
| SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE) |
| onenand_load_main(s, sec, |
| 1 << (PAGE_SHIFT - 9), s->data[0][0]); |
| s->addr[ONEN_BUF_PAGE] += 4; |
| s->addr[ONEN_BUF_PAGE] &= 0xff; |
| } |
| break; |
| } |
| |
| switch (value) { |
| case 0x00f0: /* Reset OneNAND */ |
| onenand_reset(s, 0); |
| break; |
| |
| case 0x00e0: /* Load Data into Buffer */ |
| s->cycle = 1; |
| break; |
| |
| case 0x0090: /* Read Identification Data */ |
| memset(s->boot[0], 0, 3 << s->shift); |
| s->boot[0][0 << s->shift] = (s->id >> 16) & 0xff; |
| s->boot[0][1 << s->shift] = (s->id >> 8) & 0xff; |
| s->boot[0][2 << s->shift] = s->wpstatus & 0xff; |
| break; |
| |
| default: |
| fprintf(stderr, "%s: unknown OneNAND boot command %x\n", |
| __FUNCTION__, value); |
| } |
| break; |
| |
| case 0xf100 ... 0xf107: /* Start addresses */ |
| s->addr[offset - 0xf100] = value; |
| break; |
| |
| case 0xf200: /* Start buffer */ |
| s->bufaddr = (value >> 8) & 0xf; |
| if (PAGE_SHIFT == 11) |
| s->count = (value & 3) ?: 4; |
| else if (PAGE_SHIFT == 10) |
| s->count = (value & 1) ?: 2; |
| break; |
| |
| case 0xf220: /* Command */ |
| if (s->intstatus & (1 << 15)) |
| break; |
| s->command = value; |
| onenand_command(s, s->command); |
| break; |
| case 0xf221: /* System Configuration 1 */ |
| s->config[0] = value; |
| onenand_intr_update(s); |
| qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1); |
| break; |
| case 0xf222: /* System Configuration 2 */ |
| s->config[1] = value; |
| break; |
| |
| case 0xf241: /* Interrupt */ |
| s->intstatus &= value; |
| if ((1 << 15) & ~s->intstatus) |
| s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE | |
| ONEN_ERR_PROG | ONEN_ERR_LOAD); |
| onenand_intr_update(s); |
| break; |
| case 0xf24c: /* Unlock Start Block Address */ |
| s->unladdr[0] = value & (s->blocks - 1); |
| /* For some reason we have to set the end address to by default |
| * be same as start because the software forgets to write anything |
| * in there. */ |
| s->unladdr[1] = value & (s->blocks - 1); |
| break; |
| case 0xf24d: /* Unlock End Block Address */ |
| s->unladdr[1] = value & (s->blocks - 1); |
| break; |
| |
| default: |
| fprintf(stderr, "%s: unknown OneNAND register %x\n", |
| __FUNCTION__, offset); |
| } |
| } |
| |
| static CPUReadMemoryFunc *onenand_readfn[] = { |
| onenand_read, /* TODO */ |
| onenand_read, |
| onenand_read, |
| }; |
| |
| static CPUWriteMemoryFunc *onenand_writefn[] = { |
| onenand_write, /* TODO */ |
| onenand_write, |
| onenand_write, |
| }; |
| |
| void *onenand_init(uint32_t id, int regshift, qemu_irq irq) |
| { |
| struct onenand_s *s = (struct onenand_s *) qemu_mallocz(sizeof(*s)); |
| int bdrv_index = drive_get_index(IF_MTD, 0, 0); |
| uint32_t size = 1 << (24 + ((id >> 12) & 7)); |
| void *ram; |
| |
| s->shift = regshift; |
| s->intr = irq; |
| s->rdy = 0; |
| s->id = id; |
| s->blocks = size >> BLOCK_SHIFT; |
| s->secs = size >> 9; |
| s->blockwp = qemu_malloc(s->blocks); |
| s->density_mask = (id & (1 << 11)) ? (1 << (6 + ((id >> 12) & 7))) : 0; |
| s->iomemtype = cpu_register_io_memory(0, onenand_readfn, |
| onenand_writefn, s); |
| if (bdrv_index == -1) |
| s->image = memset(qemu_malloc(size + (size >> 5)), |
| 0xff, size + (size >> 5)); |
| else |
| s->bdrv = drives_table[bdrv_index].bdrv; |
| s->otp = memset(qemu_malloc((64 + 2) << PAGE_SHIFT), |
| 0xff, (64 + 2) << PAGE_SHIFT); |
| s->ram = qemu_ram_alloc(0xc000 << s->shift); |
| ram = phys_ram_base + s->ram; |
| s->boot[0] = ram + (0x0000 << s->shift); |
| s->boot[1] = ram + (0x8000 << s->shift); |
| s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift); |
| s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift); |
| s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift); |
| s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift); |
| |
| onenand_reset(s, 1); |
| |
| return s; |
| } |