blob: 57f20af76e1fe0225d10ce5bb2c66c453ff21c44 [file] [log] [blame]
/*
* QTest testcase for PowerNV 10 Seeprom Communications
*
* Copyright (c) 2024, IBM Corporation.
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#include <unistd.h>
#include "qemu/osdep.h"
#include "libqtest.h"
#include "qemu/bswap.h"
#include "hw/ssi/pnv_spi_regs.h"
#include "pnv-xscom.h"
#define FLASH_SIZE (512 * 1024)
#define SPIC2_XSCOM_BASE 0xc0040
/* To transmit READ opcode and address */
#define READ_OP_TDR_DATA 0x0300010000000000
/*
* N1 shift - tx 4 bytes (transmit opcode and address)
* N2 shift - tx and rx 8 bytes.
*/
#define READ_OP_COUNTER_CONFIG 0x2040000000002b00
/* SEQ_OP_SELECT_RESPONDER - N1 Shift - N2 Shift * 5 - SEQ_OP_STOP */
#define READ_OP_SEQUENCER 0x1130404040404010
/* To transmit WREN(Set Write Enable Latch in status0 register) opcode */
#define WRITE_OP_WREN 0x0600000000000000
/* To transmit WRITE opcode, address and data */
#define WRITE_OP_TDR_DATA 0x0300010012345678
/* N1 shift - tx 8 bytes (transmit opcode, address and data) */
#define WRITE_OP_COUNTER_CONFIG 0x4000000000002000
/* SEQ_OP_SELECT_RESPONDER - N1 Shift - SEQ_OP_STOP */
#define WRITE_OP_SEQUENCER 0x1130100000000000
static void pnv_spi_xscom_write(QTestState *qts, const PnvChip *chip,
uint32_t reg, uint64_t val)
{
uint32_t pcba = SPIC2_XSCOM_BASE + reg;
qtest_writeq(qts, pnv_xscom_addr(chip, pcba), val);
}
static uint64_t pnv_spi_xscom_read(QTestState *qts, const PnvChip *chip,
uint32_t reg)
{
uint32_t pcba = SPIC2_XSCOM_BASE + reg;
return qtest_readq(qts, pnv_xscom_addr(chip, pcba));
}
static void spi_seeprom_transaction(QTestState *qts, const PnvChip *chip)
{
/* SPI transactions to SEEPROM to read from SEEPROM image */
pnv_spi_xscom_write(qts, chip, SPI_CTR_CFG_REG, READ_OP_COUNTER_CONFIG);
pnv_spi_xscom_write(qts, chip, SPI_SEQ_OP_REG, READ_OP_SEQUENCER);
pnv_spi_xscom_write(qts, chip, SPI_XMIT_DATA_REG, READ_OP_TDR_DATA);
pnv_spi_xscom_write(qts, chip, SPI_XMIT_DATA_REG, 0);
/* Read 5*8 bytes from SEEPROM at 0x100 */
uint64_t rdr_val = pnv_spi_xscom_read(qts, chip, SPI_RCV_DATA_REG);
g_test_message("RDR READ = 0x%" PRIx64, rdr_val);
rdr_val = pnv_spi_xscom_read(qts, chip, SPI_RCV_DATA_REG);
rdr_val = pnv_spi_xscom_read(qts, chip, SPI_RCV_DATA_REG);
rdr_val = pnv_spi_xscom_read(qts, chip, SPI_RCV_DATA_REG);
rdr_val = pnv_spi_xscom_read(qts, chip, SPI_RCV_DATA_REG);
g_test_message("RDR READ = 0x%" PRIx64, rdr_val);
/* SPI transactions to SEEPROM to write to SEEPROM image */
pnv_spi_xscom_write(qts, chip, SPI_CTR_CFG_REG, WRITE_OP_COUNTER_CONFIG);
/* Set Write Enable Latch bit of status0 register */
pnv_spi_xscom_write(qts, chip, SPI_SEQ_OP_REG, WRITE_OP_SEQUENCER);
pnv_spi_xscom_write(qts, chip, SPI_XMIT_DATA_REG, WRITE_OP_WREN);
/* write 8 bytes to SEEPROM at 0x100 */
pnv_spi_xscom_write(qts, chip, SPI_SEQ_OP_REG, WRITE_OP_SEQUENCER);
pnv_spi_xscom_write(qts, chip, SPI_XMIT_DATA_REG, WRITE_OP_TDR_DATA);
}
static void test_spi_seeprom(const void *data)
{
const PnvChip *chip = data;
QTestState *qts = NULL;
g_autofree char *tmp_path = NULL;
int ret;
int fd;
/* Create a temporary raw image */
fd = g_file_open_tmp("qtest-seeprom-XXXXXX", &tmp_path, NULL);
g_assert(fd >= 0);
ret = ftruncate(fd, FLASH_SIZE);
g_assert(ret == 0);
close(fd);
qts = qtest_initf("-machine powernv10 -smp 2,cores=2,"
"threads=1 -accel tcg,thread=single -nographic "
"-blockdev node-name=pib_spic2,driver=file,"
"filename=%s -device 25csm04,bus=pnv-spi-bus.2,cs=0,"
"drive=pib_spic2", tmp_path);
spi_seeprom_transaction(qts, chip);
qtest_quit(qts);
unlink(tmp_path);
}
int main(int argc, char **argv)
{
g_test_init(&argc, &argv, NULL);
char *tname = g_strdup_printf("pnv-xscom/spi-seeprom/%s",
pnv_chips[3].cpu_model);
qtest_add_data_func(tname, &pnv_chips[3], test_spi_seeprom);
g_free(tname);
return g_test_run();
}