| /* |
| * Virtio driver bits |
| * |
| * Copyright (c) 2013 Alexander Graf <agraf@suse.de> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or (at |
| * your option) any later version. See the COPYING file in the top-level |
| * directory. |
| */ |
| |
| #include <string.h> |
| #include "s390-ccw.h" |
| #include "cio.h" |
| #include "virtio.h" |
| #include "virtio-scsi.h" |
| #include "bswap.h" |
| #include "helper.h" |
| #include "s390-time.h" |
| |
| #define VRING_WAIT_REPLY_TIMEOUT 30 |
| |
| static VRing block[VIRTIO_MAX_VQS]; |
| static char ring_area[VIRTIO_RING_SIZE * VIRTIO_MAX_VQS] |
| __attribute__((__aligned__(PAGE_SIZE))); |
| |
| static VDev vdev = { |
| .nr_vqs = 1, |
| .vrings = block, |
| .cmd_vr_idx = 0, |
| .ring_area = ring_area, |
| .wait_reply_timeout = VRING_WAIT_REPLY_TIMEOUT, |
| .schid = { .one = 1 }, |
| .scsi_block_size = VIRTIO_SCSI_BLOCK_SIZE, |
| .blk_factor = 1, |
| }; |
| |
| VDev *virtio_get_device(void) |
| { |
| return &vdev; |
| } |
| |
| VirtioDevType virtio_get_device_type(void) |
| { |
| return vdev.senseid.cu_model; |
| } |
| |
| /* virtio spec v1.0 para 4.3.3.2 */ |
| static long kvm_hypercall(unsigned long nr, unsigned long param1, |
| unsigned long param2, unsigned long param3) |
| { |
| register unsigned long r_nr asm("1") = nr; |
| register unsigned long r_param1 asm("2") = param1; |
| register unsigned long r_param2 asm("3") = param2; |
| register unsigned long r_param3 asm("4") = param3; |
| register long retval asm("2"); |
| |
| asm volatile ("diag %%r2,%%r4,0x500" |
| : "=d" (retval) |
| : "d" (r_nr), "0" (r_param1), "r"(r_param2), "d"(r_param3) |
| : "memory", "cc"); |
| |
| return retval; |
| } |
| |
| static long virtio_notify(SubChannelId schid, int vq_idx, long cookie) |
| { |
| return kvm_hypercall(KVM_S390_VIRTIO_CCW_NOTIFY, *(u32 *)&schid, |
| vq_idx, cookie); |
| } |
| |
| /*********************************************** |
| * Virtio functions * |
| ***********************************************/ |
| |
| int drain_irqs(SubChannelId schid) |
| { |
| Irb irb = {}; |
| int r = 0; |
| |
| while (1) { |
| /* FIXME: make use of TPI, for that enable subchannel and isc */ |
| if (tsch(schid, &irb)) { |
| /* Might want to differentiate error codes later on. */ |
| if (irb.scsw.cstat) { |
| r = -EIO; |
| } else if (irb.scsw.dstat != 0xc) { |
| r = -EIO; |
| } |
| return r; |
| } |
| } |
| } |
| |
| static int run_ccw(VDev *vdev, int cmd, void *ptr, int len, bool sli) |
| { |
| Ccw1 ccw = {}; |
| |
| ccw.cmd_code = cmd; |
| ccw.cda = (long)ptr; |
| ccw.count = len; |
| |
| if (sli) { |
| ccw.flags |= CCW_FLAG_SLI; |
| } |
| |
| return do_cio(vdev->schid, vdev->senseid.cu_type, ptr2u32(&ccw), CCW_FMT1); |
| } |
| |
| static void vring_init(VRing *vr, VqInfo *info) |
| { |
| void *p = (void *) info->queue; |
| |
| debug_print_addr("init p", p); |
| vr->id = info->index; |
| vr->num = info->num; |
| vr->desc = p; |
| vr->avail = p + info->num * sizeof(VRingDesc); |
| vr->used = (void *)(((unsigned long)&vr->avail->ring[info->num] |
| + info->align - 1) & ~(info->align - 1)); |
| |
| /* Zero out all relevant field */ |
| vr->avail->flags = 0; |
| vr->avail->idx = 0; |
| |
| /* We're running with interrupts off anyways, so don't bother */ |
| vr->used->flags = VRING_USED_F_NO_NOTIFY; |
| vr->used->idx = 0; |
| vr->used_idx = 0; |
| vr->next_idx = 0; |
| vr->cookie = 0; |
| |
| debug_print_addr("init vr", vr); |
| } |
| |
| bool vring_notify(VRing *vr) |
| { |
| vr->cookie = virtio_notify(vr->schid, vr->id, vr->cookie); |
| return vr->cookie >= 0; |
| } |
| |
| void vring_send_buf(VRing *vr, void *p, int len, int flags) |
| { |
| /* For follow-up chains we need to keep the first entry point */ |
| if (!(flags & VRING_HIDDEN_IS_CHAIN)) { |
| vr->avail->ring[vr->avail->idx % vr->num] = vr->next_idx; |
| } |
| |
| vr->desc[vr->next_idx].addr = (unsigned long)p; |
| vr->desc[vr->next_idx].len = len; |
| vr->desc[vr->next_idx].flags = flags & ~VRING_HIDDEN_IS_CHAIN; |
| vr->desc[vr->next_idx].next = vr->next_idx; |
| vr->desc[vr->next_idx].next++; |
| vr->next_idx++; |
| |
| /* Chains only have a single ID */ |
| if (!(flags & VRING_DESC_F_NEXT)) { |
| vr->avail->idx++; |
| } |
| } |
| |
| int vr_poll(VRing *vr) |
| { |
| if (vr->used->idx == vr->used_idx) { |
| vring_notify(vr); |
| yield(); |
| return 0; |
| } |
| |
| vr->used_idx = vr->used->idx; |
| vr->next_idx = 0; |
| vr->desc[0].len = 0; |
| vr->desc[0].flags = 0; |
| return 1; /* vr has been updated */ |
| } |
| |
| /* |
| * Wait for the host to reply. |
| * |
| * timeout is in seconds if > 0. |
| * |
| * Returns 0 on success, 1 on timeout. |
| */ |
| int vring_wait_reply(void) |
| { |
| unsigned long target_second = get_time_seconds() + vdev.wait_reply_timeout; |
| |
| /* Wait for any queue to be updated by the host */ |
| do { |
| int i, r = 0; |
| |
| for (i = 0; i < vdev.nr_vqs; i++) { |
| r += vr_poll(&vdev.vrings[i]); |
| } |
| yield(); |
| if (r) { |
| return 0; |
| } |
| } while (!vdev.wait_reply_timeout || (get_time_seconds() < target_second)); |
| |
| return 1; |
| } |
| |
| int virtio_run(VDev *vdev, int vqid, VirtioCmd *cmd) |
| { |
| VRing *vr = &vdev->vrings[vqid]; |
| int i = 0; |
| |
| do { |
| vring_send_buf(vr, cmd[i].data, cmd[i].size, |
| cmd[i].flags | (i ? VRING_HIDDEN_IS_CHAIN : 0)); |
| } while (cmd[i++].flags & VRING_DESC_F_NEXT); |
| |
| vring_wait_reply(); |
| if (drain_irqs(vr->schid)) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| int virtio_setup_ccw(VDev *vdev) |
| { |
| int i, cfg_size = 0; |
| uint8_t status; |
| struct VirtioFeatureDesc { |
| uint32_t features; |
| uint8_t index; |
| } __attribute__((packed)) feats; |
| |
| if (!virtio_is_supported(vdev->schid)) { |
| puts("Virtio unsupported for this device ID"); |
| return -ENODEV; |
| } |
| /* device ID has been established now */ |
| |
| vdev->config.blk.blk_size = 0; /* mark "illegal" - setup started... */ |
| vdev->guessed_disk_nature = VIRTIO_GDN_NONE; |
| |
| run_ccw(vdev, CCW_CMD_VDEV_RESET, NULL, 0, false); |
| |
| status = VIRTIO_CONFIG_S_ACKNOWLEDGE; |
| if (run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false)) { |
| puts("Could not write ACKNOWLEDGE status to host"); |
| return -EIO; |
| } |
| |
| switch (vdev->senseid.cu_model) { |
| case VIRTIO_ID_NET: |
| vdev->nr_vqs = 2; |
| vdev->cmd_vr_idx = 0; |
| cfg_size = sizeof(vdev->config.net); |
| break; |
| case VIRTIO_ID_BLOCK: |
| vdev->nr_vqs = 1; |
| vdev->cmd_vr_idx = 0; |
| cfg_size = sizeof(vdev->config.blk); |
| break; |
| case VIRTIO_ID_SCSI: |
| vdev->nr_vqs = 3; |
| vdev->cmd_vr_idx = VR_REQUEST; |
| cfg_size = sizeof(vdev->config.scsi); |
| break; |
| default: |
| puts("Unsupported virtio device"); |
| return -ENODEV; |
| } |
| |
| status |= VIRTIO_CONFIG_S_DRIVER; |
| if (run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false)) { |
| puts("Could not write DRIVER status to host"); |
| return -EIO; |
| } |
| |
| /* Feature negotiation */ |
| for (i = 0; i < ARRAY_SIZE(vdev->guest_features); i++) { |
| feats.features = 0; |
| feats.index = i; |
| if (run_ccw(vdev, CCW_CMD_READ_FEAT, &feats, sizeof(feats), false)) { |
| puts("Could not get features bits"); |
| return -EIO; |
| } |
| |
| vdev->guest_features[i] &= bswap32(feats.features); |
| feats.features = bswap32(vdev->guest_features[i]); |
| if (run_ccw(vdev, CCW_CMD_WRITE_FEAT, &feats, sizeof(feats), false)) { |
| puts("Could not set features bits"); |
| return -EIO; |
| } |
| } |
| |
| if (run_ccw(vdev, CCW_CMD_READ_CONF, &vdev->config, cfg_size, false)) { |
| puts("Could not get virtio device configuration"); |
| return -EIO; |
| } |
| |
| for (i = 0; i < vdev->nr_vqs; i++) { |
| VqInfo info = { |
| .queue = (unsigned long long) ring_area + (i * VIRTIO_RING_SIZE), |
| .align = KVM_S390_VIRTIO_RING_ALIGN, |
| .index = i, |
| .num = 0, |
| }; |
| VqConfig config = { |
| .index = i, |
| .num = 0, |
| }; |
| |
| if (run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config), |
| false)) { |
| puts("Could not get virtio device VQ config"); |
| return -EIO; |
| } |
| info.num = config.num; |
| vring_init(&vdev->vrings[i], &info); |
| vdev->vrings[i].schid = vdev->schid; |
| if (run_ccw(vdev, CCW_CMD_SET_VQ, &info, sizeof(info), false)) { |
| puts("Cannot set VQ info"); |
| return -EIO; |
| } |
| } |
| |
| status |= VIRTIO_CONFIG_S_DRIVER_OK; |
| if (run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false)) { |
| puts("Could not write DRIVER_OK status to host"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| bool virtio_is_supported(SubChannelId schid) |
| { |
| vdev.schid = schid; |
| memset(&vdev.senseid, 0, sizeof(vdev.senseid)); |
| |
| /* |
| * Run sense id command. |
| * The size of the senseid data differs between devices (notably, |
| * between virtio devices and dasds), so specify the largest possible |
| * size and suppress the incorrect length indication for smaller sizes. |
| */ |
| if (run_ccw(&vdev, CCW_CMD_SENSE_ID, &vdev.senseid, sizeof(vdev.senseid), |
| true)) { |
| return false; |
| } |
| if (vdev.senseid.cu_type == 0x3832) { |
| switch (vdev.senseid.cu_model) { |
| case VIRTIO_ID_BLOCK: |
| case VIRTIO_ID_SCSI: |
| case VIRTIO_ID_NET: |
| return true; |
| } |
| } |
| return false; |
| } |