| HXCOMM Use DEFHEADING() to define headings in both help text and texi |
| HXCOMM Text between STEXI and ETEXI are copied to texi version and |
| HXCOMM discarded from C version |
| HXCOMM DEF(option, HAS_ARG/0, opt_enum, opt_help, arch_mask) is used to |
| HXCOMM construct option structures, enums and help message for specified |
| HXCOMM architectures. |
| HXCOMM HXCOMM can be used for comments, discarded from both texi and C |
| |
| DEFHEADING(Standard options:) |
| STEXI |
| @table @option |
| ETEXI |
| |
| DEF("help", 0, QEMU_OPTION_h, |
| "-h or -help display this help and exit\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -h |
| @findex -h |
| Display help and exit |
| ETEXI |
| |
| DEF("version", 0, QEMU_OPTION_version, |
| "-version display version information and exit\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -version |
| @findex -version |
| Display version information and exit |
| ETEXI |
| |
| DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ |
| "-machine [type=]name[,prop[=value][,...]]\n" |
| " selects emulated machine ('-machine help' for list)\n" |
| " property accel=accel1[:accel2[:...]] selects accelerator\n" |
| " supported accelerators are kvm, xen, tcg (default: tcg)\n" |
| " kernel_irqchip=on|off controls accelerated irqchip support\n" |
| " kvm_shadow_mem=size of KVM shadow MMU\n" |
| " dump-guest-core=on|off include guest memory in a core dump (default=on)\n" |
| " mem-merge=on|off controls memory merge support (default: on)\n" |
| " iommu=on|off controls emulated Intel IOMMU (VT-d) support (default=off)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -machine [type=]@var{name}[,prop=@var{value}[,...]] |
| @findex -machine |
| Select the emulated machine by @var{name}. Use @code{-machine help} to list |
| available machines. Supported machine properties are: |
| @table @option |
| @item accel=@var{accels1}[:@var{accels2}[:...]] |
| This is used to enable an accelerator. Depending on the target architecture, |
| kvm, xen, or tcg can be available. By default, tcg is used. If there is more |
| than one accelerator specified, the next one is used if the previous one fails |
| to initialize. |
| @item kernel_irqchip=on|off |
| Enables in-kernel irqchip support for the chosen accelerator when available. |
| @item kvm_shadow_mem=size |
| Defines the size of the KVM shadow MMU. |
| @item dump-guest-core=on|off |
| Include guest memory in a core dump. The default is on. |
| @item mem-merge=on|off |
| Enables or disables memory merge support. This feature, when supported by |
| the host, de-duplicates identical memory pages among VMs instances |
| (enabled by default). |
| @item iommu=on|off |
| Enables or disables emulated Intel IOMMU (VT-d) support. The default is off. |
| @end table |
| ETEXI |
| |
| HXCOMM Deprecated by -machine |
| DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL) |
| |
| DEF("cpu", HAS_ARG, QEMU_OPTION_cpu, |
| "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -cpu @var{model} |
| @findex -cpu |
| Select CPU model (@code{-cpu help} for list and additional feature selection) |
| ETEXI |
| |
| DEF("smp", HAS_ARG, QEMU_OPTION_smp, |
| "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n" |
| " set the number of CPUs to 'n' [default=1]\n" |
| " maxcpus= maximum number of total cpus, including\n" |
| " offline CPUs for hotplug, etc\n" |
| " cores= number of CPU cores on one socket\n" |
| " threads= number of threads on one CPU core\n" |
| " sockets= number of discrete sockets in the system\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}] |
| @findex -smp |
| Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255 |
| CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs |
| to 4. |
| For the PC target, the number of @var{cores} per socket, the number |
| of @var{threads} per cores and the total number of @var{sockets} can be |
| specified. Missing values will be computed. If any on the three values is |
| given, the total number of CPUs @var{n} can be omitted. @var{maxcpus} |
| specifies the maximum number of hotpluggable CPUs. |
| ETEXI |
| |
| DEF("numa", HAS_ARG, QEMU_OPTION_numa, |
| "-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]\n" |
| "-numa node[,memdev=id][,cpus=cpu[-cpu]][,nodeid=node]\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -numa node[,mem=@var{size}][,cpus=@var{cpu[-cpu]}][,nodeid=@var{node}] |
| @item -numa node[,memdev=@var{id}][,cpus=@var{cpu[-cpu]}][,nodeid=@var{node}] |
| @findex -numa |
| Simulate a multi node NUMA system. If @samp{mem}, @samp{memdev} |
| and @samp{cpus} are omitted, resources are split equally. Also, note |
| that the -@option{numa} option doesn't allocate any of the specified |
| resources. That is, it just assigns existing resources to NUMA nodes. This |
| means that one still has to use the @option{-m}, @option{-smp} options |
| to allocate RAM and VCPUs respectively, and possibly @option{-object} |
| to specify the memory backend for the @samp{memdev} suboption. |
| |
| @samp{mem} and @samp{memdev} are mutually exclusive. Furthermore, if one |
| node uses @samp{memdev}, all of them have to use it. |
| ETEXI |
| |
| DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd, |
| "-add-fd fd=fd,set=set[,opaque=opaque]\n" |
| " Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -add-fd fd=@var{fd},set=@var{set}[,opaque=@var{opaque}] |
| @findex -add-fd |
| |
| Add a file descriptor to an fd set. Valid options are: |
| |
| @table @option |
| @item fd=@var{fd} |
| This option defines the file descriptor of which a duplicate is added to fd set. |
| The file descriptor cannot be stdin, stdout, or stderr. |
| @item set=@var{set} |
| This option defines the ID of the fd set to add the file descriptor to. |
| @item opaque=@var{opaque} |
| This option defines a free-form string that can be used to describe @var{fd}. |
| @end table |
| |
| You can open an image using pre-opened file descriptors from an fd set: |
| @example |
| qemu-system-i386 |
| -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" |
| -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" |
| -drive file=/dev/fdset/2,index=0,media=disk |
| @end example |
| ETEXI |
| |
| DEF("set", HAS_ARG, QEMU_OPTION_set, |
| "-set group.id.arg=value\n" |
| " set <arg> parameter for item <id> of type <group>\n" |
| " i.e. -set drive.$id.file=/path/to/image\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -set @var{group}.@var{id}.@var{arg}=@var{value} |
| @findex -set |
| Set parameter @var{arg} for item @var{id} of type @var{group}\n" |
| ETEXI |
| |
| DEF("global", HAS_ARG, QEMU_OPTION_global, |
| "-global driver.prop=value\n" |
| " set a global default for a driver property\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -global @var{driver}.@var{prop}=@var{value} |
| @findex -global |
| Set default value of @var{driver}'s property @var{prop} to @var{value}, e.g.: |
| |
| @example |
| qemu-system-i386 -global ide-drive.physical_block_size=4096 -drive file=file,if=ide,index=0,media=disk |
| @end example |
| |
| In particular, you can use this to set driver properties for devices which are |
| created automatically by the machine model. To create a device which is not |
| created automatically and set properties on it, use -@option{device}. |
| ETEXI |
| |
| DEF("boot", HAS_ARG, QEMU_OPTION_boot, |
| "-boot [order=drives][,once=drives][,menu=on|off]\n" |
| " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time][,strict=on|off]\n" |
| " 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n" |
| " 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on\n" |
| " 'sp_time': the period that splash picture last if menu=on, unit is ms\n" |
| " 'rb_timeout': the timeout before guest reboot when boot failed, unit is ms\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}][,strict=on|off] |
| @findex -boot |
| Specify boot order @var{drives} as a string of drive letters. Valid |
| drive letters depend on the target achitecture. The x86 PC uses: a, b |
| (floppy 1 and 2), c (first hard disk), d (first CD-ROM), n-p (Etherboot |
| from network adapter 1-4), hard disk boot is the default. To apply a |
| particular boot order only on the first startup, specify it via |
| @option{once}. |
| |
| Interactive boot menus/prompts can be enabled via @option{menu=on} as far |
| as firmware/BIOS supports them. The default is non-interactive boot. |
| |
| A splash picture could be passed to bios, enabling user to show it as logo, |
| when option splash=@var{sp_name} is given and menu=on, If firmware/BIOS |
| supports them. Currently Seabios for X86 system support it. |
| limitation: The splash file could be a jpeg file or a BMP file in 24 BPP |
| format(true color). The resolution should be supported by the SVGA mode, so |
| the recommended is 320x240, 640x480, 800x640. |
| |
| A timeout could be passed to bios, guest will pause for @var{rb_timeout} ms |
| when boot failed, then reboot. If @var{rb_timeout} is '-1', guest will not |
| reboot, qemu passes '-1' to bios by default. Currently Seabios for X86 |
| system support it. |
| |
| Do strict boot via @option{strict=on} as far as firmware/BIOS |
| supports it. This only effects when boot priority is changed by |
| bootindex options. The default is non-strict boot. |
| |
| @example |
| # try to boot from network first, then from hard disk |
| qemu-system-i386 -boot order=nc |
| # boot from CD-ROM first, switch back to default order after reboot |
| qemu-system-i386 -boot once=d |
| # boot with a splash picture for 5 seconds. |
| qemu-system-i386 -boot menu=on,splash=/root/boot.bmp,splash-time=5000 |
| @end example |
| |
| Note: The legacy format '-boot @var{drives}' is still supported but its |
| use is discouraged as it may be removed from future versions. |
| ETEXI |
| |
| DEF("m", HAS_ARG, QEMU_OPTION_m, |
| "-m[emory] [size=]megs[,slots=n,maxmem=size]\n" |
| " configure guest RAM\n" |
| " size: initial amount of guest memory (default: " |
| stringify(DEFAULT_RAM_SIZE) "MiB)\n" |
| " slots: number of hotplug slots (default: none)\n" |
| " maxmem: maximum amount of guest memory (default: none)\n" |
| "NOTE: Some architectures might enforce a specific granularity\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -m [size=]@var{megs} |
| @findex -m |
| Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB. Optionally, |
| a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or |
| gigabytes respectively. Optional pair @var{slots}, @var{maxmem} could be used |
| to set amount of hotluggable memory slots and possible maximum amount of memory. |
| ETEXI |
| |
| DEF("mem-path", HAS_ARG, QEMU_OPTION_mempath, |
| "-mem-path FILE provide backing storage for guest RAM\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -mem-path @var{path} |
| @findex -mem-path |
| Allocate guest RAM from a temporarily created file in @var{path}. |
| ETEXI |
| |
| DEF("mem-prealloc", 0, QEMU_OPTION_mem_prealloc, |
| "-mem-prealloc preallocate guest memory (use with -mem-path)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -mem-prealloc |
| @findex -mem-prealloc |
| Preallocate memory when using -mem-path. |
| ETEXI |
| |
| DEF("k", HAS_ARG, QEMU_OPTION_k, |
| "-k language use keyboard layout (for example 'fr' for French)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -k @var{language} |
| @findex -k |
| Use keyboard layout @var{language} (for example @code{fr} for |
| French). This option is only needed where it is not easy to get raw PC |
| keycodes (e.g. on Macs, with some X11 servers or with a VNC |
| display). You don't normally need to use it on PC/Linux or PC/Windows |
| hosts. |
| |
| The available layouts are: |
| @example |
| ar de-ch es fo fr-ca hu ja mk no pt-br sv |
| da en-gb et fr fr-ch is lt nl pl ru th |
| de en-us fi fr-be hr it lv nl-be pt sl tr |
| @end example |
| |
| The default is @code{en-us}. |
| ETEXI |
| |
| |
| DEF("audio-help", 0, QEMU_OPTION_audio_help, |
| "-audio-help print list of audio drivers and their options\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -audio-help |
| @findex -audio-help |
| Will show the audio subsystem help: list of drivers, tunable |
| parameters. |
| ETEXI |
| |
| DEF("soundhw", HAS_ARG, QEMU_OPTION_soundhw, |
| "-soundhw c1,... enable audio support\n" |
| " and only specified sound cards (comma separated list)\n" |
| " use '-soundhw help' to get the list of supported cards\n" |
| " use '-soundhw all' to enable all of them\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -soundhw @var{card1}[,@var{card2},...] or -soundhw all |
| @findex -soundhw |
| Enable audio and selected sound hardware. Use 'help' to print all |
| available sound hardware. |
| |
| @example |
| qemu-system-i386 -soundhw sb16,adlib disk.img |
| qemu-system-i386 -soundhw es1370 disk.img |
| qemu-system-i386 -soundhw ac97 disk.img |
| qemu-system-i386 -soundhw hda disk.img |
| qemu-system-i386 -soundhw all disk.img |
| qemu-system-i386 -soundhw help |
| @end example |
| |
| Note that Linux's i810_audio OSS kernel (for AC97) module might |
| require manually specifying clocking. |
| |
| @example |
| modprobe i810_audio clocking=48000 |
| @end example |
| ETEXI |
| |
| DEF("balloon", HAS_ARG, QEMU_OPTION_balloon, |
| "-balloon none disable balloon device\n" |
| "-balloon virtio[,addr=str]\n" |
| " enable virtio balloon device (default)\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -balloon none |
| @findex -balloon |
| Disable balloon device. |
| @item -balloon virtio[,addr=@var{addr}] |
| Enable virtio balloon device (default), optionally with PCI address |
| @var{addr}. |
| ETEXI |
| |
| DEF("device", HAS_ARG, QEMU_OPTION_device, |
| "-device driver[,prop[=value][,...]]\n" |
| " add device (based on driver)\n" |
| " prop=value,... sets driver properties\n" |
| " use '-device help' to print all possible drivers\n" |
| " use '-device driver,help' to print all possible properties\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -device @var{driver}[,@var{prop}[=@var{value}][,...]] |
| @findex -device |
| Add device @var{driver}. @var{prop}=@var{value} sets driver |
| properties. Valid properties depend on the driver. To get help on |
| possible drivers and properties, use @code{-device help} and |
| @code{-device @var{driver},help}. |
| ETEXI |
| |
| DEF("name", HAS_ARG, QEMU_OPTION_name, |
| "-name string1[,process=string2][,debug-threads=on|off]\n" |
| " set the name of the guest\n" |
| " string1 sets the window title and string2 the process name (on Linux)\n" |
| " When debug-threads is enabled, individual threads are given a separate name (on Linux)\n" |
| " NOTE: The thread names are for debugging and not a stable API.\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -name @var{name} |
| @findex -name |
| Sets the @var{name} of the guest. |
| This name will be displayed in the SDL window caption. |
| The @var{name} will also be used for the VNC server. |
| Also optionally set the top visible process name in Linux. |
| Naming of individual threads can also be enabled on Linux to aid debugging. |
| ETEXI |
| |
| DEF("uuid", HAS_ARG, QEMU_OPTION_uuid, |
| "-uuid %08x-%04x-%04x-%04x-%012x\n" |
| " specify machine UUID\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -uuid @var{uuid} |
| @findex -uuid |
| Set system UUID. |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| DEFHEADING(Block device options:) |
| STEXI |
| @table @option |
| ETEXI |
| |
| DEF("fda", HAS_ARG, QEMU_OPTION_fda, |
| "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL) |
| DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL) |
| STEXI |
| @item -fda @var{file} |
| @item -fdb @var{file} |
| @findex -fda |
| @findex -fdb |
| Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can |
| use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}). |
| ETEXI |
| |
| DEF("hda", HAS_ARG, QEMU_OPTION_hda, |
| "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL) |
| DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL) |
| DEF("hdc", HAS_ARG, QEMU_OPTION_hdc, |
| "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL) |
| DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL) |
| STEXI |
| @item -hda @var{file} |
| @item -hdb @var{file} |
| @item -hdc @var{file} |
| @item -hdd @var{file} |
| @findex -hda |
| @findex -hdb |
| @findex -hdc |
| @findex -hdd |
| Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}). |
| ETEXI |
| |
| DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom, |
| "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -cdrom @var{file} |
| @findex -cdrom |
| Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and |
| @option{-cdrom} at the same time). You can use the host CD-ROM by |
| using @file{/dev/cdrom} as filename (@pxref{host_drives}). |
| ETEXI |
| |
| DEF("drive", HAS_ARG, QEMU_OPTION_drive, |
| "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n" |
| " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n" |
| " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n" |
| " [,serial=s][,addr=A][,rerror=ignore|stop|report]\n" |
| " [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]\n" |
| " [,readonly=on|off][,copy-on-read=on|off]\n" |
| " [,discard=ignore|unmap][,detect-zeroes=on|off|unmap]\n" |
| " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]]\n" |
| " [[,iops=i]|[[,iops_rd=r][,iops_wr=w]]]\n" |
| " [[,bps_max=bm]|[[,bps_rd_max=rm][,bps_wr_max=wm]]]\n" |
| " [[,iops_max=im]|[[,iops_rd_max=irm][,iops_wr_max=iwm]]]\n" |
| " [[,iops_size=is]]\n" |
| " use 'file' as a drive image\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -drive @var{option}[,@var{option}[,@var{option}[,...]]] |
| @findex -drive |
| |
| Define a new drive. Valid options are: |
| |
| @table @option |
| @item file=@var{file} |
| This option defines which disk image (@pxref{disk_images}) to use with |
| this drive. If the filename contains comma, you must double it |
| (for instance, "file=my,,file" to use file "my,file"). |
| |
| Special files such as iSCSI devices can be specified using protocol |
| specific URLs. See the section for "Device URL Syntax" for more information. |
| @item if=@var{interface} |
| This option defines on which type on interface the drive is connected. |
| Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio. |
| @item bus=@var{bus},unit=@var{unit} |
| These options define where is connected the drive by defining the bus number and |
| the unit id. |
| @item index=@var{index} |
| This option defines where is connected the drive by using an index in the list |
| of available connectors of a given interface type. |
| @item media=@var{media} |
| This option defines the type of the media: disk or cdrom. |
| @item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}] |
| These options have the same definition as they have in @option{-hdachs}. |
| @item snapshot=@var{snapshot} |
| @var{snapshot} is "on" or "off" and controls snapshot mode for the given drive |
| (see @option{-snapshot}). |
| @item cache=@var{cache} |
| @var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data. |
| @item aio=@var{aio} |
| @var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO. |
| @item discard=@var{discard} |
| @var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap}) requests are ignored or passed to the filesystem. Some machine types may not support discard requests. |
| @item format=@var{format} |
| Specify which disk @var{format} will be used rather than detecting |
| the format. Can be used to specifiy format=raw to avoid interpreting |
| an untrusted format header. |
| @item serial=@var{serial} |
| This option specifies the serial number to assign to the device. |
| @item addr=@var{addr} |
| Specify the controller's PCI address (if=virtio only). |
| @item werror=@var{action},rerror=@var{action} |
| Specify which @var{action} to take on write and read errors. Valid actions are: |
| "ignore" (ignore the error and try to continue), "stop" (pause QEMU), |
| "report" (report the error to the guest), "enospc" (pause QEMU only if the |
| host disk is full; report the error to the guest otherwise). |
| The default setting is @option{werror=enospc} and @option{rerror=report}. |
| @item readonly |
| Open drive @option{file} as read-only. Guest write attempts will fail. |
| @item copy-on-read=@var{copy-on-read} |
| @var{copy-on-read} is "on" or "off" and enables whether to copy read backing |
| file sectors into the image file. |
| @item detect-zeroes=@var{detect-zeroes} |
| @var{detect-zeroes} is "off", "on" or "unmap" and enables the automatic |
| conversion of plain zero writes by the OS to driver specific optimized |
| zero write commands. You may even choose "unmap" if @var{discard} is set |
| to "unmap" to allow a zero write to be converted to an UNMAP operation. |
| @end table |
| |
| By default, the @option{cache=writeback} mode is used. It will report data |
| writes as completed as soon as the data is present in the host page cache. |
| This is safe as long as your guest OS makes sure to correctly flush disk caches |
| where needed. If your guest OS does not handle volatile disk write caches |
| correctly and your host crashes or loses power, then the guest may experience |
| data corruption. |
| |
| For such guests, you should consider using @option{cache=writethrough}. This |
| means that the host page cache will be used to read and write data, but write |
| notification will be sent to the guest only after QEMU has made sure to flush |
| each write to the disk. Be aware that this has a major impact on performance. |
| |
| The host page cache can be avoided entirely with @option{cache=none}. This will |
| attempt to do disk IO directly to the guest's memory. QEMU may still perform |
| an internal copy of the data. Note that this is considered a writeback mode and |
| the guest OS must handle the disk write cache correctly in order to avoid data |
| corruption on host crashes. |
| |
| The host page cache can be avoided while only sending write notifications to |
| the guest when the data has been flushed to the disk using |
| @option{cache=directsync}. |
| |
| In case you don't care about data integrity over host failures, use |
| @option{cache=unsafe}. This option tells QEMU that it never needs to write any |
| data to the disk but can instead keep things in cache. If anything goes wrong, |
| like your host losing power, the disk storage getting disconnected accidentally, |
| etc. your image will most probably be rendered unusable. When using |
| the @option{-snapshot} option, unsafe caching is always used. |
| |
| Copy-on-read avoids accessing the same backing file sectors repeatedly and is |
| useful when the backing file is over a slow network. By default copy-on-read |
| is off. |
| |
| Instead of @option{-cdrom} you can use: |
| @example |
| qemu-system-i386 -drive file=file,index=2,media=cdrom |
| @end example |
| |
| Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can |
| use: |
| @example |
| qemu-system-i386 -drive file=file,index=0,media=disk |
| qemu-system-i386 -drive file=file,index=1,media=disk |
| qemu-system-i386 -drive file=file,index=2,media=disk |
| qemu-system-i386 -drive file=file,index=3,media=disk |
| @end example |
| |
| You can open an image using pre-opened file descriptors from an fd set: |
| @example |
| qemu-system-i386 |
| -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" |
| -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" |
| -drive file=/dev/fdset/2,index=0,media=disk |
| @end example |
| |
| You can connect a CDROM to the slave of ide0: |
| @example |
| qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom |
| @end example |
| |
| If you don't specify the "file=" argument, you define an empty drive: |
| @example |
| qemu-system-i386 -drive if=ide,index=1,media=cdrom |
| @end example |
| |
| You can connect a SCSI disk with unit ID 6 on the bus #0: |
| @example |
| qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6 |
| @end example |
| |
| Instead of @option{-fda}, @option{-fdb}, you can use: |
| @example |
| qemu-system-i386 -drive file=file,index=0,if=floppy |
| qemu-system-i386 -drive file=file,index=1,if=floppy |
| @end example |
| |
| By default, @var{interface} is "ide" and @var{index} is automatically |
| incremented: |
| @example |
| qemu-system-i386 -drive file=a -drive file=b" |
| @end example |
| is interpreted like: |
| @example |
| qemu-system-i386 -hda a -hdb b |
| @end example |
| ETEXI |
| |
| DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock, |
| "-mtdblock file use 'file' as on-board Flash memory image\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -mtdblock @var{file} |
| @findex -mtdblock |
| Use @var{file} as on-board Flash memory image. |
| ETEXI |
| |
| DEF("sd", HAS_ARG, QEMU_OPTION_sd, |
| "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -sd @var{file} |
| @findex -sd |
| Use @var{file} as SecureDigital card image. |
| ETEXI |
| |
| DEF("pflash", HAS_ARG, QEMU_OPTION_pflash, |
| "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -pflash @var{file} |
| @findex -pflash |
| Use @var{file} as a parallel flash image. |
| ETEXI |
| |
| DEF("snapshot", 0, QEMU_OPTION_snapshot, |
| "-snapshot write to temporary files instead of disk image files\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -snapshot |
| @findex -snapshot |
| Write to temporary files instead of disk image files. In this case, |
| the raw disk image you use is not written back. You can however force |
| the write back by pressing @key{C-a s} (@pxref{disk_images}). |
| ETEXI |
| |
| DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \ |
| "-hdachs c,h,s[,t]\n" \ |
| " force hard disk 0 physical geometry and the optional BIOS\n" \ |
| " translation (t=none or lba) (usually QEMU can guess them)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -hdachs @var{c},@var{h},@var{s},[,@var{t}] |
| @findex -hdachs |
| Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <= |
| @var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS |
| translation mode (@var{t}=none, lba or auto). Usually QEMU can guess |
| all those parameters. This option is useful for old MS-DOS disk |
| images. |
| ETEXI |
| |
| DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev, |
| "-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n" |
| " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", |
| QEMU_ARCH_ALL) |
| |
| STEXI |
| |
| @item -fsdev @var{fsdriver},id=@var{id},path=@var{path},[security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] |
| @findex -fsdev |
| Define a new file system device. Valid options are: |
| @table @option |
| @item @var{fsdriver} |
| This option specifies the fs driver backend to use. |
| Currently "local", "handle" and "proxy" file system drivers are supported. |
| @item id=@var{id} |
| Specifies identifier for this device |
| @item path=@var{path} |
| Specifies the export path for the file system device. Files under |
| this path will be available to the 9p client on the guest. |
| @item security_model=@var{security_model} |
| Specifies the security model to be used for this export path. |
| Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". |
| In "passthrough" security model, files are stored using the same |
| credentials as they are created on the guest. This requires QEMU |
| to run as root. In "mapped-xattr" security model, some of the file |
| attributes like uid, gid, mode bits and link target are stored as |
| file attributes. For "mapped-file" these attributes are stored in the |
| hidden .virtfs_metadata directory. Directories exported by this security model cannot |
| interact with other unix tools. "none" security model is same as |
| passthrough except the sever won't report failures if it fails to |
| set file attributes like ownership. Security model is mandatory |
| only for local fsdriver. Other fsdrivers (like handle, proxy) don't take |
| security model as a parameter. |
| @item writeout=@var{writeout} |
| This is an optional argument. The only supported value is "immediate". |
| This means that host page cache will be used to read and write data but |
| write notification will be sent to the guest only when the data has been |
| reported as written by the storage subsystem. |
| @item readonly |
| Enables exporting 9p share as a readonly mount for guests. By default |
| read-write access is given. |
| @item socket=@var{socket} |
| Enables proxy filesystem driver to use passed socket file for communicating |
| with virtfs-proxy-helper |
| @item sock_fd=@var{sock_fd} |
| Enables proxy filesystem driver to use passed socket descriptor for |
| communicating with virtfs-proxy-helper. Usually a helper like libvirt |
| will create socketpair and pass one of the fds as sock_fd |
| @end table |
| |
| -fsdev option is used along with -device driver "virtio-9p-pci". |
| @item -device virtio-9p-pci,fsdev=@var{id},mount_tag=@var{mount_tag} |
| Options for virtio-9p-pci driver are: |
| @table @option |
| @item fsdev=@var{id} |
| Specifies the id value specified along with -fsdev option |
| @item mount_tag=@var{mount_tag} |
| Specifies the tag name to be used by the guest to mount this export point |
| @end table |
| |
| ETEXI |
| |
| DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs, |
| "-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n" |
| " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", |
| QEMU_ARCH_ALL) |
| |
| STEXI |
| |
| @item -virtfs @var{fsdriver}[,path=@var{path}],mount_tag=@var{mount_tag}[,security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] |
| @findex -virtfs |
| |
| The general form of a Virtual File system pass-through options are: |
| @table @option |
| @item @var{fsdriver} |
| This option specifies the fs driver backend to use. |
| Currently "local", "handle" and "proxy" file system drivers are supported. |
| @item id=@var{id} |
| Specifies identifier for this device |
| @item path=@var{path} |
| Specifies the export path for the file system device. Files under |
| this path will be available to the 9p client on the guest. |
| @item security_model=@var{security_model} |
| Specifies the security model to be used for this export path. |
| Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". |
| In "passthrough" security model, files are stored using the same |
| credentials as they are created on the guest. This requires QEMU |
| to run as root. In "mapped-xattr" security model, some of the file |
| attributes like uid, gid, mode bits and link target are stored as |
| file attributes. For "mapped-file" these attributes are stored in the |
| hidden .virtfs_metadata directory. Directories exported by this security model cannot |
| interact with other unix tools. "none" security model is same as |
| passthrough except the sever won't report failures if it fails to |
| set file attributes like ownership. Security model is mandatory only |
| for local fsdriver. Other fsdrivers (like handle, proxy) don't take security |
| model as a parameter. |
| @item writeout=@var{writeout} |
| This is an optional argument. The only supported value is "immediate". |
| This means that host page cache will be used to read and write data but |
| write notification will be sent to the guest only when the data has been |
| reported as written by the storage subsystem. |
| @item readonly |
| Enables exporting 9p share as a readonly mount for guests. By default |
| read-write access is given. |
| @item socket=@var{socket} |
| Enables proxy filesystem driver to use passed socket file for |
| communicating with virtfs-proxy-helper. Usually a helper like libvirt |
| will create socketpair and pass one of the fds as sock_fd |
| @item sock_fd |
| Enables proxy filesystem driver to use passed 'sock_fd' as the socket |
| descriptor for interfacing with virtfs-proxy-helper |
| @end table |
| ETEXI |
| |
| DEF("virtfs_synth", 0, QEMU_OPTION_virtfs_synth, |
| "-virtfs_synth Create synthetic file system image\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -virtfs_synth |
| @findex -virtfs_synth |
| Create synthetic file system image |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| DEFHEADING(USB options:) |
| STEXI |
| @table @option |
| ETEXI |
| |
| DEF("usb", 0, QEMU_OPTION_usb, |
| "-usb enable the USB driver (will be the default soon)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -usb |
| @findex -usb |
| Enable the USB driver (will be the default soon) |
| ETEXI |
| |
| DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice, |
| "-usbdevice name add the host or guest USB device 'name'\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| |
| @item -usbdevice @var{devname} |
| @findex -usbdevice |
| Add the USB device @var{devname}. @xref{usb_devices}. |
| |
| @table @option |
| |
| @item mouse |
| Virtual Mouse. This will override the PS/2 mouse emulation when activated. |
| |
| @item tablet |
| Pointer device that uses absolute coordinates (like a touchscreen). This |
| means QEMU is able to report the mouse position without having to grab the |
| mouse. Also overrides the PS/2 mouse emulation when activated. |
| |
| @item disk:[format=@var{format}]:@var{file} |
| Mass storage device based on file. The optional @var{format} argument |
| will be used rather than detecting the format. Can be used to specifiy |
| @code{format=raw} to avoid interpreting an untrusted format header. |
| |
| @item host:@var{bus}.@var{addr} |
| Pass through the host device identified by @var{bus}.@var{addr} (Linux only). |
| |
| @item host:@var{vendor_id}:@var{product_id} |
| Pass through the host device identified by @var{vendor_id}:@var{product_id} |
| (Linux only). |
| |
| @item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev} |
| Serial converter to host character device @var{dev}, see @code{-serial} for the |
| available devices. |
| |
| @item braille |
| Braille device. This will use BrlAPI to display the braille output on a real |
| or fake device. |
| |
| @item net:@var{options} |
| Network adapter that supports CDC ethernet and RNDIS protocols. |
| |
| @end table |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| DEFHEADING(Display options:) |
| STEXI |
| @table @option |
| ETEXI |
| |
| DEF("display", HAS_ARG, QEMU_OPTION_display, |
| "-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n" |
| " [,window_close=on|off]|curses|none|\n" |
| " gtk[,grab_on_hover=on|off]|\n" |
| " vnc=<display>[,<optargs>]\n" |
| " select display type\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -display @var{type} |
| @findex -display |
| Select type of display to use. This option is a replacement for the |
| old style -sdl/-curses/... options. Valid values for @var{type} are |
| @table @option |
| @item sdl |
| Display video output via SDL (usually in a separate graphics |
| window; see the SDL documentation for other possibilities). |
| @item curses |
| Display video output via curses. For graphics device models which |
| support a text mode, QEMU can display this output using a |
| curses/ncurses interface. Nothing is displayed when the graphics |
| device is in graphical mode or if the graphics device does not support |
| a text mode. Generally only the VGA device models support text mode. |
| @item none |
| Do not display video output. The guest will still see an emulated |
| graphics card, but its output will not be displayed to the QEMU |
| user. This option differs from the -nographic option in that it |
| only affects what is done with video output; -nographic also changes |
| the destination of the serial and parallel port data. |
| @item gtk |
| Display video output in a GTK window. This interface provides drop-down |
| menus and other UI elements to configure and control the VM during |
| runtime. |
| @item vnc |
| Start a VNC server on display <arg> |
| @end table |
| ETEXI |
| |
| DEF("nographic", 0, QEMU_OPTION_nographic, |
| "-nographic disable graphical output and redirect serial I/Os to console\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -nographic |
| @findex -nographic |
| Normally, QEMU uses SDL to display the VGA output. With this option, |
| you can totally disable graphical output so that QEMU is a simple |
| command line application. The emulated serial port is redirected on |
| the console and muxed with the monitor (unless redirected elsewhere |
| explicitly). Therefore, you can still use QEMU to debug a Linux kernel |
| with a serial console. Use @key{C-a h} for help on switching between |
| the console and monitor. |
| ETEXI |
| |
| DEF("curses", 0, QEMU_OPTION_curses, |
| "-curses use a curses/ncurses interface instead of SDL\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -curses |
| @findex -curses |
| Normally, QEMU uses SDL to display the VGA output. With this option, |
| QEMU can display the VGA output when in text mode using a |
| curses/ncurses interface. Nothing is displayed in graphical mode. |
| ETEXI |
| |
| DEF("no-frame", 0, QEMU_OPTION_no_frame, |
| "-no-frame open SDL window without a frame and window decorations\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -no-frame |
| @findex -no-frame |
| Do not use decorations for SDL windows and start them using the whole |
| available screen space. This makes the using QEMU in a dedicated desktop |
| workspace more convenient. |
| ETEXI |
| |
| DEF("alt-grab", 0, QEMU_OPTION_alt_grab, |
| "-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -alt-grab |
| @findex -alt-grab |
| Use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt). Note that this also |
| affects the special keys (for fullscreen, monitor-mode switching, etc). |
| ETEXI |
| |
| DEF("ctrl-grab", 0, QEMU_OPTION_ctrl_grab, |
| "-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -ctrl-grab |
| @findex -ctrl-grab |
| Use Right-Ctrl to grab mouse (instead of Ctrl-Alt). Note that this also |
| affects the special keys (for fullscreen, monitor-mode switching, etc). |
| ETEXI |
| |
| DEF("no-quit", 0, QEMU_OPTION_no_quit, |
| "-no-quit disable SDL window close capability\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -no-quit |
| @findex -no-quit |
| Disable SDL window close capability. |
| ETEXI |
| |
| DEF("sdl", 0, QEMU_OPTION_sdl, |
| "-sdl enable SDL\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -sdl |
| @findex -sdl |
| Enable SDL. |
| ETEXI |
| |
| DEF("spice", HAS_ARG, QEMU_OPTION_spice, |
| "-spice [port=port][,tls-port=secured-port][,x509-dir=<dir>]\n" |
| " [,x509-key-file=<file>][,x509-key-password=<file>]\n" |
| " [,x509-cert-file=<file>][,x509-cacert-file=<file>]\n" |
| " [,x509-dh-key-file=<file>][,addr=addr][,ipv4|ipv6]\n" |
| " [,tls-ciphers=<list>]\n" |
| " [,tls-channel=[main|display|cursor|inputs|record|playback]]\n" |
| " [,plaintext-channel=[main|display|cursor|inputs|record|playback]]\n" |
| " [,sasl][,password=<secret>][,disable-ticketing]\n" |
| " [,image-compression=[auto_glz|auto_lz|quic|glz|lz|off]]\n" |
| " [,jpeg-wan-compression=[auto|never|always]]\n" |
| " [,zlib-glz-wan-compression=[auto|never|always]]\n" |
| " [,streaming-video=[off|all|filter]][,disable-copy-paste]\n" |
| " [,disable-agent-file-xfer][,agent-mouse=[on|off]]\n" |
| " [,playback-compression=[on|off]][,seamless-migration=[on|off]]\n" |
| " enable spice\n" |
| " at least one of {port, tls-port} is mandatory\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -spice @var{option}[,@var{option}[,...]] |
| @findex -spice |
| Enable the spice remote desktop protocol. Valid options are |
| |
| @table @option |
| |
| @item port=<nr> |
| Set the TCP port spice is listening on for plaintext channels. |
| |
| @item addr=<addr> |
| Set the IP address spice is listening on. Default is any address. |
| |
| @item ipv4 |
| @item ipv6 |
| Force using the specified IP version. |
| |
| @item password=<secret> |
| Set the password you need to authenticate. |
| |
| @item sasl |
| Require that the client use SASL to authenticate with the spice. |
| The exact choice of authentication method used is controlled from the |
| system / user's SASL configuration file for the 'qemu' service. This |
| is typically found in /etc/sasl2/qemu.conf. If running QEMU as an |
| unprivileged user, an environment variable SASL_CONF_PATH can be used |
| to make it search alternate locations for the service config. |
| While some SASL auth methods can also provide data encryption (eg GSSAPI), |
| it is recommended that SASL always be combined with the 'tls' and |
| 'x509' settings to enable use of SSL and server certificates. This |
| ensures a data encryption preventing compromise of authentication |
| credentials. |
| |
| @item disable-ticketing |
| Allow client connects without authentication. |
| |
| @item disable-copy-paste |
| Disable copy paste between the client and the guest. |
| |
| @item disable-agent-file-xfer |
| Disable spice-vdagent based file-xfer between the client and the guest. |
| |
| @item tls-port=<nr> |
| Set the TCP port spice is listening on for encrypted channels. |
| |
| @item x509-dir=<dir> |
| Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir |
| |
| @item x509-key-file=<file> |
| @item x509-key-password=<file> |
| @item x509-cert-file=<file> |
| @item x509-cacert-file=<file> |
| @item x509-dh-key-file=<file> |
| The x509 file names can also be configured individually. |
| |
| @item tls-ciphers=<list> |
| Specify which ciphers to use. |
| |
| @item tls-channel=[main|display|cursor|inputs|record|playback] |
| @item plaintext-channel=[main|display|cursor|inputs|record|playback] |
| Force specific channel to be used with or without TLS encryption. The |
| options can be specified multiple times to configure multiple |
| channels. The special name "default" can be used to set the default |
| mode. For channels which are not explicitly forced into one mode the |
| spice client is allowed to pick tls/plaintext as he pleases. |
| |
| @item image-compression=[auto_glz|auto_lz|quic|glz|lz|off] |
| Configure image compression (lossless). |
| Default is auto_glz. |
| |
| @item jpeg-wan-compression=[auto|never|always] |
| @item zlib-glz-wan-compression=[auto|never|always] |
| Configure wan image compression (lossy for slow links). |
| Default is auto. |
| |
| @item streaming-video=[off|all|filter] |
| Configure video stream detection. Default is filter. |
| |
| @item agent-mouse=[on|off] |
| Enable/disable passing mouse events via vdagent. Default is on. |
| |
| @item playback-compression=[on|off] |
| Enable/disable audio stream compression (using celt 0.5.1). Default is on. |
| |
| @item seamless-migration=[on|off] |
| Enable/disable spice seamless migration. Default is off. |
| |
| @end table |
| ETEXI |
| |
| DEF("portrait", 0, QEMU_OPTION_portrait, |
| "-portrait rotate graphical output 90 deg left (only PXA LCD)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -portrait |
| @findex -portrait |
| Rotate graphical output 90 deg left (only PXA LCD). |
| ETEXI |
| |
| DEF("rotate", HAS_ARG, QEMU_OPTION_rotate, |
| "-rotate <deg> rotate graphical output some deg left (only PXA LCD)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -rotate @var{deg} |
| @findex -rotate |
| Rotate graphical output some deg left (only PXA LCD). |
| ETEXI |
| |
| DEF("vga", HAS_ARG, QEMU_OPTION_vga, |
| "-vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|none]\n" |
| " select video card type\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -vga @var{type} |
| @findex -vga |
| Select type of VGA card to emulate. Valid values for @var{type} are |
| @table @option |
| @item cirrus |
| Cirrus Logic GD5446 Video card. All Windows versions starting from |
| Windows 95 should recognize and use this graphic card. For optimal |
| performances, use 16 bit color depth in the guest and the host OS. |
| (This one is the default) |
| @item std |
| Standard VGA card with Bochs VBE extensions. If your guest OS |
| supports the VESA 2.0 VBE extensions (e.g. Windows XP) and if you want |
| to use high resolution modes (>= 1280x1024x16) then you should use |
| this option. |
| @item vmware |
| VMWare SVGA-II compatible adapter. Use it if you have sufficiently |
| recent XFree86/XOrg server or Windows guest with a driver for this |
| card. |
| @item qxl |
| QXL paravirtual graphic card. It is VGA compatible (including VESA |
| 2.0 VBE support). Works best with qxl guest drivers installed though. |
| Recommended choice when using the spice protocol. |
| @item tcx |
| (sun4m only) Sun TCX framebuffer. This is the default framebuffer for |
| sun4m machines and offers both 8-bit and 24-bit colour depths at a |
| fixed resolution of 1024x768. |
| @item cg3 |
| (sun4m only) Sun cgthree framebuffer. This is a simple 8-bit framebuffer |
| for sun4m machines available in both 1024x768 (OpenBIOS) and 1152x900 (OBP) |
| resolutions aimed at people wishing to run older Solaris versions. |
| @item none |
| Disable VGA card. |
| @end table |
| ETEXI |
| |
| DEF("full-screen", 0, QEMU_OPTION_full_screen, |
| "-full-screen start in full screen\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -full-screen |
| @findex -full-screen |
| Start in full screen. |
| ETEXI |
| |
| DEF("g", 1, QEMU_OPTION_g , |
| "-g WxH[xDEPTH] Set the initial graphical resolution and depth\n", |
| QEMU_ARCH_PPC | QEMU_ARCH_SPARC) |
| STEXI |
| @item -g @var{width}x@var{height}[x@var{depth}] |
| @findex -g |
| Set the initial graphical resolution and depth (PPC, SPARC only). |
| ETEXI |
| |
| DEF("vnc", HAS_ARG, QEMU_OPTION_vnc , |
| "-vnc display start a VNC server on display\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -vnc @var{display}[,@var{option}[,@var{option}[,...]]] |
| @findex -vnc |
| Normally, QEMU uses SDL to display the VGA output. With this option, |
| you can have QEMU listen on VNC display @var{display} and redirect the VGA |
| display over the VNC session. It is very useful to enable the usb |
| tablet device when using this option (option @option{-usbdevice |
| tablet}). When using the VNC display, you must use the @option{-k} |
| parameter to set the keyboard layout if you are not using en-us. Valid |
| syntax for the @var{display} is |
| |
| @table @option |
| |
| @item @var{host}:@var{d} |
| |
| TCP connections will only be allowed from @var{host} on display @var{d}. |
| By convention the TCP port is 5900+@var{d}. Optionally, @var{host} can |
| be omitted in which case the server will accept connections from any host. |
| |
| @item unix:@var{path} |
| |
| Connections will be allowed over UNIX domain sockets where @var{path} is the |
| location of a unix socket to listen for connections on. |
| |
| @item none |
| |
| VNC is initialized but not started. The monitor @code{change} command |
| can be used to later start the VNC server. |
| |
| @end table |
| |
| Following the @var{display} value there may be one or more @var{option} flags |
| separated by commas. Valid options are |
| |
| @table @option |
| |
| @item reverse |
| |
| Connect to a listening VNC client via a ``reverse'' connection. The |
| client is specified by the @var{display}. For reverse network |
| connections (@var{host}:@var{d},@code{reverse}), the @var{d} argument |
| is a TCP port number, not a display number. |
| |
| @item websocket |
| |
| Opens an additional TCP listening port dedicated to VNC Websocket connections. |
| By definition the Websocket port is 5700+@var{display}. If @var{host} is |
| specified connections will only be allowed from this host. |
| As an alternative the Websocket port could be specified by using |
| @code{websocket}=@var{port}. |
| TLS encryption for the Websocket connection is supported if the required |
| certificates are specified with the VNC option @option{x509}. |
| |
| @item password |
| |
| Require that password based authentication is used for client connections. |
| |
| The password must be set separately using the @code{set_password} command in |
| the @ref{pcsys_monitor}. The syntax to change your password is: |
| @code{set_password <protocol> <password>} where <protocol> could be either |
| "vnc" or "spice". |
| |
| If you would like to change <protocol> password expiration, you should use |
| @code{expire_password <protocol> <expiration-time>} where expiration time could |
| be one of the following options: now, never, +seconds or UNIX time of |
| expiration, e.g. +60 to make password expire in 60 seconds, or 1335196800 |
| to make password expire on "Mon Apr 23 12:00:00 EDT 2012" (UNIX time for this |
| date and time). |
| |
| You can also use keywords "now" or "never" for the expiration time to |
| allow <protocol> password to expire immediately or never expire. |
| |
| @item tls |
| |
| Require that client use TLS when communicating with the VNC server. This |
| uses anonymous TLS credentials so is susceptible to a man-in-the-middle |
| attack. It is recommended that this option be combined with either the |
| @option{x509} or @option{x509verify} options. |
| |
| @item x509=@var{/path/to/certificate/dir} |
| |
| Valid if @option{tls} is specified. Require that x509 credentials are used |
| for negotiating the TLS session. The server will send its x509 certificate |
| to the client. It is recommended that a password be set on the VNC server |
| to provide authentication of the client when this is used. The path following |
| this option specifies where the x509 certificates are to be loaded from. |
| See the @ref{vnc_security} section for details on generating certificates. |
| |
| @item x509verify=@var{/path/to/certificate/dir} |
| |
| Valid if @option{tls} is specified. Require that x509 credentials are used |
| for negotiating the TLS session. The server will send its x509 certificate |
| to the client, and request that the client send its own x509 certificate. |
| The server will validate the client's certificate against the CA certificate, |
| and reject clients when validation fails. If the certificate authority is |
| trusted, this is a sufficient authentication mechanism. You may still wish |
| to set a password on the VNC server as a second authentication layer. The |
| path following this option specifies where the x509 certificates are to |
| be loaded from. See the @ref{vnc_security} section for details on generating |
| certificates. |
| |
| @item sasl |
| |
| Require that the client use SASL to authenticate with the VNC server. |
| The exact choice of authentication method used is controlled from the |
| system / user's SASL configuration file for the 'qemu' service. This |
| is typically found in /etc/sasl2/qemu.conf. If running QEMU as an |
| unprivileged user, an environment variable SASL_CONF_PATH can be used |
| to make it search alternate locations for the service config. |
| While some SASL auth methods can also provide data encryption (eg GSSAPI), |
| it is recommended that SASL always be combined with the 'tls' and |
| 'x509' settings to enable use of SSL and server certificates. This |
| ensures a data encryption preventing compromise of authentication |
| credentials. See the @ref{vnc_security} section for details on using |
| SASL authentication. |
| |
| @item acl |
| |
| Turn on access control lists for checking of the x509 client certificate |
| and SASL party. For x509 certs, the ACL check is made against the |
| certificate's distinguished name. This is something that looks like |
| @code{C=GB,O=ACME,L=Boston,CN=bob}. For SASL party, the ACL check is |
| made against the username, which depending on the SASL plugin, may |
| include a realm component, eg @code{bob} or @code{bob@@EXAMPLE.COM}. |
| When the @option{acl} flag is set, the initial access list will be |
| empty, with a @code{deny} policy. Thus no one will be allowed to |
| use the VNC server until the ACLs have been loaded. This can be |
| achieved using the @code{acl} monitor command. |
| |
| @item lossy |
| |
| Enable lossy compression methods (gradient, JPEG, ...). If this |
| option is set, VNC client may receive lossy framebuffer updates |
| depending on its encoding settings. Enabling this option can save |
| a lot of bandwidth at the expense of quality. |
| |
| @item non-adaptive |
| |
| Disable adaptive encodings. Adaptive encodings are enabled by default. |
| An adaptive encoding will try to detect frequently updated screen regions, |
| and send updates in these regions using a lossy encoding (like JPEG). |
| This can be really helpful to save bandwidth when playing videos. Disabling |
| adaptive encodings restores the original static behavior of encodings |
| like Tight. |
| |
| @item share=[allow-exclusive|force-shared|ignore] |
| |
| Set display sharing policy. 'allow-exclusive' allows clients to ask |
| for exclusive access. As suggested by the rfb spec this is |
| implemented by dropping other connections. Connecting multiple |
| clients in parallel requires all clients asking for a shared session |
| (vncviewer: -shared switch). This is the default. 'force-shared' |
| disables exclusive client access. Useful for shared desktop sessions, |
| where you don't want someone forgetting specify -shared disconnect |
| everybody else. 'ignore' completely ignores the shared flag and |
| allows everybody connect unconditionally. Doesn't conform to the rfb |
| spec but is traditional QEMU behavior. |
| |
| @end table |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| ARCHHEADING(, QEMU_ARCH_I386) |
| |
| ARCHHEADING(i386 target only:, QEMU_ARCH_I386) |
| STEXI |
| @table @option |
| ETEXI |
| |
| DEF("win2k-hack", 0, QEMU_OPTION_win2k_hack, |
| "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n", |
| QEMU_ARCH_I386) |
| STEXI |
| @item -win2k-hack |
| @findex -win2k-hack |
| Use it when installing Windows 2000 to avoid a disk full bug. After |
| Windows 2000 is installed, you no longer need this option (this option |
| slows down the IDE transfers). |
| ETEXI |
| |
| HXCOMM Deprecated by -rtc |
| DEF("rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack, "", QEMU_ARCH_I386) |
| |
| DEF("no-fd-bootchk", 0, QEMU_OPTION_no_fd_bootchk, |
| "-no-fd-bootchk disable boot signature checking for floppy disks\n", |
| QEMU_ARCH_I386) |
| STEXI |
| @item -no-fd-bootchk |
| @findex -no-fd-bootchk |
| Disable boot signature checking for floppy disks in BIOS. May |
| be needed to boot from old floppy disks. |
| ETEXI |
| |
| DEF("no-acpi", 0, QEMU_OPTION_no_acpi, |
| "-no-acpi disable ACPI\n", QEMU_ARCH_I386) |
| STEXI |
| @item -no-acpi |
| @findex -no-acpi |
| Disable ACPI (Advanced Configuration and Power Interface) support. Use |
| it if your guest OS complains about ACPI problems (PC target machine |
| only). |
| ETEXI |
| |
| DEF("no-hpet", 0, QEMU_OPTION_no_hpet, |
| "-no-hpet disable HPET\n", QEMU_ARCH_I386) |
| STEXI |
| @item -no-hpet |
| @findex -no-hpet |
| Disable HPET support. |
| ETEXI |
| |
| DEF("acpitable", HAS_ARG, QEMU_OPTION_acpitable, |
| "-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]\n" |
| " ACPI table description\n", QEMU_ARCH_I386) |
| STEXI |
| @item -acpitable [sig=@var{str}][,rev=@var{n}][,oem_id=@var{str}][,oem_table_id=@var{str}][,oem_rev=@var{n}] [,asl_compiler_id=@var{str}][,asl_compiler_rev=@var{n}][,data=@var{file1}[:@var{file2}]...] |
| @findex -acpitable |
| Add ACPI table with specified header fields and context from specified files. |
| For file=, take whole ACPI table from the specified files, including all |
| ACPI headers (possible overridden by other options). |
| For data=, only data |
| portion of the table is used, all header information is specified in the |
| command line. |
| ETEXI |
| |
| DEF("smbios", HAS_ARG, QEMU_OPTION_smbios, |
| "-smbios file=binary\n" |
| " load SMBIOS entry from binary file\n" |
| "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d][,uefi=on|off]\n" |
| " specify SMBIOS type 0 fields\n" |
| "-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]\n" |
| " [,uuid=uuid][,sku=str][,family=str]\n" |
| " specify SMBIOS type 1 fields\n", QEMU_ARCH_I386) |
| STEXI |
| @item -smbios file=@var{binary} |
| @findex -smbios |
| Load SMBIOS entry from binary file. |
| |
| @item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}][,uefi=on|off] |
| Specify SMBIOS type 0 fields |
| |
| @item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}] [,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}] [,family=@var{str}] |
| Specify SMBIOS type 1 fields |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| DEFHEADING(Network options:) |
| STEXI |
| @table @option |
| ETEXI |
| |
| HXCOMM Legacy slirp options (now moved to -net user): |
| #ifdef CONFIG_SLIRP |
| DEF("tftp", HAS_ARG, QEMU_OPTION_tftp, "", QEMU_ARCH_ALL) |
| DEF("bootp", HAS_ARG, QEMU_OPTION_bootp, "", QEMU_ARCH_ALL) |
| DEF("redir", HAS_ARG, QEMU_OPTION_redir, "", QEMU_ARCH_ALL) |
| #ifndef _WIN32 |
| DEF("smb", HAS_ARG, QEMU_OPTION_smb, "", QEMU_ARCH_ALL) |
| #endif |
| #endif |
| |
| DEF("net", HAS_ARG, QEMU_OPTION_net, |
| "-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n" |
| " create a new Network Interface Card and connect it to VLAN 'n'\n" |
| #ifdef CONFIG_SLIRP |
| "-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]\n" |
| " [,hostname=host][,dhcpstart=addr][,dns=addr][,dnssearch=domain][,tftp=dir]\n" |
| " [,bootfile=f][,hostfwd=rule][,guestfwd=rule]" |
| #ifndef _WIN32 |
| "[,smb=dir[,smbserver=addr]]\n" |
| #endif |
| " connect the user mode network stack to VLAN 'n', configure its\n" |
| " DHCP server and enabled optional services\n" |
| #endif |
| #ifdef _WIN32 |
| "-net tap[,vlan=n][,name=str],ifname=name\n" |
| " connect the host TAP network interface to VLAN 'n'\n" |
| #else |
| "-net tap[,vlan=n][,name=str][,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostfds=x:y:...:z][,vhostforce=on|off][,queues=n]\n" |
| " connect the host TAP network interface to VLAN 'n'\n" |
| " use network scripts 'file' (default=" DEFAULT_NETWORK_SCRIPT ")\n" |
| " to configure it and 'dfile' (default=" DEFAULT_NETWORK_DOWN_SCRIPT ")\n" |
| " to deconfigure it\n" |
| " use '[down]script=no' to disable script execution\n" |
| " use network helper 'helper' (default=" DEFAULT_BRIDGE_HELPER ") to\n" |
| " configure it\n" |
| " use 'fd=h' to connect to an already opened TAP interface\n" |
| " use 'fds=x:y:...:z' to connect to already opened multiqueue capable TAP interfaces\n" |
| " use 'sndbuf=nbytes' to limit the size of the send buffer (the\n" |
| " default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')\n" |
| " use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag\n" |
| " use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition\n" |
| " use vhost=on to enable experimental in kernel accelerator\n" |
| " (only has effect for virtio guests which use MSIX)\n" |
| " use vhostforce=on to force vhost on for non-MSIX virtio guests\n" |
| " use 'vhostfd=h' to connect to an already opened vhost net device\n" |
| " use 'vhostfds=x:y:...:z to connect to multiple already opened vhost net devices\n" |
| " use 'queues=n' to specify the number of queues to be created for multiqueue TAP\n" |
| "-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]\n" |
| " connects a host TAP network interface to a host bridge device 'br'\n" |
| " (default=" DEFAULT_BRIDGE_INTERFACE ") using the program 'helper'\n" |
| " (default=" DEFAULT_BRIDGE_HELPER ")\n" |
| #endif |
| #ifdef __linux__ |
| "-net l2tpv3[,vlan=n][,name=str],src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6=on/off][,udp=on/off][,cookie64=on/off][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]\n" |
| " connect the VLAN to an Ethernet over L2TPv3 pseudowire\n" |
| " Linux kernel 3.3+ as well as most routers can talk\n" |
| " L2TPv3. This transport allows connecting a VM to a VM,\n" |
| " VM to a router and even VM to Host. It is a nearly-universal\n" |
| " standard (RFC3391). Note - this implementation uses static\n" |
| " pre-configured tunnels (same as the Linux kernel).\n" |
| " use 'src=' to specify source address\n" |
| " use 'dst=' to specify destination address\n" |
| " use 'udp=on' to specify udp encapsulation\n" |
| " use 'srcport=' to specify source udp port\n" |
| " use 'dstport=' to specify destination udp port\n" |
| " use 'ipv6=on' to force v6\n" |
| " L2TPv3 uses cookies to prevent misconfiguration as\n" |
| " well as a weak security measure\n" |
| " use 'rxcookie=0x012345678' to specify a rxcookie\n" |
| " use 'txcookie=0x012345678' to specify a txcookie\n" |
| " use 'cookie64=on' to set cookie size to 64 bit, otherwise 32\n" |
| " use 'counter=off' to force a 'cut-down' L2TPv3 with no counter\n" |
| " use 'pincounter=on' to work around broken counter handling in peer\n" |
| " use 'offset=X' to add an extra offset between header and data\n" |
| #endif |
| "-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]\n" |
| " connect the vlan 'n' to another VLAN using a socket connection\n" |
| "-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]\n" |
| " connect the vlan 'n' to multicast maddr and port\n" |
| " use 'localaddr=addr' to specify the host address to send packets from\n" |
| "-net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]\n" |
| " connect the vlan 'n' to another VLAN using an UDP tunnel\n" |
| #ifdef CONFIG_VDE |
| "-net vde[,vlan=n][,name=str][,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n" |
| " connect the vlan 'n' to port 'n' of a vde switch running\n" |
| " on host and listening for incoming connections on 'socketpath'.\n" |
| " Use group 'groupname' and mode 'octalmode' to change default\n" |
| " ownership and permissions for communication port.\n" |
| #endif |
| #ifdef CONFIG_NETMAP |
| "-net netmap,ifname=name[,devname=nmname]\n" |
| " attach to the existing netmap-enabled network interface 'name', or to a\n" |
| " VALE port (created on the fly) called 'name' ('nmname' is name of the \n" |
| " netmap device, defaults to '/dev/netmap')\n" |
| #endif |
| "-net dump[,vlan=n][,file=f][,len=n]\n" |
| " dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n" |
| "-net none use it alone to have zero network devices. If no -net option\n" |
| " is provided, the default is '-net nic -net user'\n", QEMU_ARCH_ALL) |
| DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, |
| "-netdev [" |
| #ifdef CONFIG_SLIRP |
| "user|" |
| #endif |
| "tap|" |
| "bridge|" |
| #ifdef CONFIG_VDE |
| "vde|" |
| #endif |
| #ifdef CONFIG_NETMAP |
| "netmap|" |
| #endif |
| "vhost-user|" |
| "socket|" |
| "hubport],id=str[,option][,option][,...]\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -net nic[,vlan=@var{n}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}] |
| @findex -net |
| Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n} |
| = 0 is the default). The NIC is an e1000 by default on the PC |
| target. Optionally, the MAC address can be changed to @var{mac}, the |
| device address set to @var{addr} (PCI cards only), |
| and a @var{name} can be assigned for use in monitor commands. |
| Optionally, for PCI cards, you can specify the number @var{v} of MSI-X vectors |
| that the card should have; this option currently only affects virtio cards; set |
| @var{v} = 0 to disable MSI-X. If no @option{-net} option is specified, a single |
| NIC is created. QEMU can emulate several different models of network card. |
| Valid values for @var{type} are |
| @code{virtio}, @code{i82551}, @code{i82557b}, @code{i82559er}, |
| @code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139}, |
| @code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}. |
| Not all devices are supported on all targets. Use @code{-net nic,model=help} |
| for a list of available devices for your target. |
| |
| @item -netdev user,id=@var{id}[,@var{option}][,@var{option}][,...] |
| @findex -netdev |
| @item -net user[,@var{option}][,@var{option}][,...] |
| Use the user mode network stack which requires no administrator |
| privilege to run. Valid options are: |
| |
| @table @option |
| @item vlan=@var{n} |
| Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default). |
| |
| @item id=@var{id} |
| @item name=@var{name} |
| Assign symbolic name for use in monitor commands. |
| |
| @item net=@var{addr}[/@var{mask}] |
| Set IP network address the guest will see. Optionally specify the netmask, |
| either in the form a.b.c.d or as number of valid top-most bits. Default is |
| 10.0.2.0/24. |
| |
| @item host=@var{addr} |
| Specify the guest-visible address of the host. Default is the 2nd IP in the |
| guest network, i.e. x.x.x.2. |
| |
| @item restrict=on|off |
| If this option is enabled, the guest will be isolated, i.e. it will not be |
| able to contact the host and no guest IP packets will be routed over the host |
| to the outside. This option does not affect any explicitly set forwarding rules. |
| |
| @item hostname=@var{name} |
| Specifies the client hostname reported by the built-in DHCP server. |
| |
| @item dhcpstart=@var{addr} |
| Specify the first of the 16 IPs the built-in DHCP server can assign. Default |
| is the 15th to 31st IP in the guest network, i.e. x.x.x.15 to x.x.x.31. |
| |
| @item dns=@var{addr} |
| Specify the guest-visible address of the virtual nameserver. The address must |
| be different from the host address. Default is the 3rd IP in the guest network, |
| i.e. x.x.x.3. |
| |
| @item dnssearch=@var{domain} |
| Provides an entry for the domain-search list sent by the built-in |
| DHCP server. More than one domain suffix can be transmitted by specifying |
| this option multiple times. If supported, this will cause the guest to |
| automatically try to append the given domain suffix(es) in case a domain name |
| can not be resolved. |
| |
| Example: |
| @example |
| qemu -net user,dnssearch=mgmt.example.org,dnssearch=example.org [...] |
| @end example |
| |
| @item tftp=@var{dir} |
| When using the user mode network stack, activate a built-in TFTP |
| server. The files in @var{dir} will be exposed as the root of a TFTP server. |
| The TFTP client on the guest must be configured in binary mode (use the command |
| @code{bin} of the Unix TFTP client). |
| |
| @item bootfile=@var{file} |
| When using the user mode network stack, broadcast @var{file} as the BOOTP |
| filename. In conjunction with @option{tftp}, this can be used to network boot |
| a guest from a local directory. |
| |
| Example (using pxelinux): |
| @example |
| qemu-system-i386 -hda linux.img -boot n -net user,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 |
| @end example |
| |
| @item smb=@var{dir}[,smbserver=@var{addr}] |
| When using the user mode network stack, activate a built-in SMB |
| server so that Windows OSes can access to the host files in @file{@var{dir}} |
| transparently. The IP address of the SMB server can be set to @var{addr}. By |
| default the 4th IP in the guest network is used, i.e. x.x.x.4. |
| |
| In the guest Windows OS, the line: |
| @example |
| 10.0.2.4 smbserver |
| @end example |
| must be added in the file @file{C:\WINDOWS\LMHOSTS} (for windows 9x/Me) |
| or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows NT/2000). |
| |
| Then @file{@var{dir}} can be accessed in @file{\\smbserver\qemu}. |
| |
| Note that a SAMBA server must be installed on the host OS. |
| QEMU was tested successfully with smbd versions from Red Hat 9, |
| Fedora Core 3 and OpenSUSE 11.x. |
| |
| @item hostfwd=[tcp|udp]:[@var{hostaddr}]:@var{hostport}-[@var{guestaddr}]:@var{guestport} |
| Redirect incoming TCP or UDP connections to the host port @var{hostport} to |
| the guest IP address @var{guestaddr} on guest port @var{guestport}. If |
| @var{guestaddr} is not specified, its value is x.x.x.15 (default first address |
| given by the built-in DHCP server). By specifying @var{hostaddr}, the rule can |
| be bound to a specific host interface. If no connection type is set, TCP is |
| used. This option can be given multiple times. |
| |
| For example, to redirect host X11 connection from screen 1 to guest |
| screen 0, use the following: |
| |
| @example |
| # on the host |
| qemu-system-i386 -net user,hostfwd=tcp:127.0.0.1:6001-:6000 [...] |
| # this host xterm should open in the guest X11 server |
| xterm -display :1 |
| @end example |
| |
| To redirect telnet connections from host port 5555 to telnet port on |
| the guest, use the following: |
| |
| @example |
| # on the host |
| qemu-system-i386 -net user,hostfwd=tcp::5555-:23 [...] |
| telnet localhost 5555 |
| @end example |
| |
| Then when you use on the host @code{telnet localhost 5555}, you |
| connect to the guest telnet server. |
| |
| @item guestfwd=[tcp]:@var{server}:@var{port}-@var{dev} |
| @item guestfwd=[tcp]:@var{server}:@var{port}-@var{cmd:command} |
| Forward guest TCP connections to the IP address @var{server} on port @var{port} |
| to the character device @var{dev} or to a program executed by @var{cmd:command} |
| which gets spawned for each connection. This option can be given multiple times. |
| |
| You can either use a chardev directly and have that one used throughout QEMU's |
| lifetime, like in the following example: |
| |
| @example |
| # open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever |
| # the guest accesses it |
| qemu -net user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321 [...] |
| @end example |
| |
| Or you can execute a command on every TCP connection established by the guest, |
| so that QEMU behaves similar to an inetd process for that virtual server: |
| |
| @example |
| # call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234 |
| # and connect the TCP stream to its stdin/stdout |
| qemu -net 'user,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321' |
| @end example |
| |
| @end table |
| |
| Note: Legacy stand-alone options -tftp, -bootp, -smb and -redir are still |
| processed and applied to -net user. Mixing them with the new configuration |
| syntax gives undefined results. Their use for new applications is discouraged |
| as they will be removed from future versions. |
| |
| @item -netdev tap,id=@var{id}[,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}] |
| @item -net tap[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}] |
| Connect the host TAP network interface @var{name} to VLAN @var{n}. |
| |
| Use the network script @var{file} to configure it and the network script |
| @var{dfile} to deconfigure it. If @var{name} is not provided, the OS |
| automatically provides one. The default network configure script is |
| @file{/etc/qemu-ifup} and the default network deconfigure script is |
| @file{/etc/qemu-ifdown}. Use @option{script=no} or @option{downscript=no} |
| to disable script execution. |
| |
| If running QEMU as an unprivileged user, use the network helper |
| @var{helper} to configure the TAP interface. The default network |
| helper executable is @file{/path/to/qemu-bridge-helper}. |
| |
| @option{fd}=@var{h} can be used to specify the handle of an already |
| opened host TAP interface. |
| |
| Examples: |
| |
| @example |
| #launch a QEMU instance with the default network script |
| qemu-system-i386 linux.img -net nic -net tap |
| @end example |
| |
| @example |
| #launch a QEMU instance with two NICs, each one connected |
| #to a TAP device |
| qemu-system-i386 linux.img \ |
| -net nic,vlan=0 -net tap,vlan=0,ifname=tap0 \ |
| -net nic,vlan=1 -net tap,vlan=1,ifname=tap1 |
| @end example |
| |
| @example |
| #launch a QEMU instance with the default network helper to |
| #connect a TAP device to bridge br0 |
| qemu-system-i386 linux.img \ |
| -net nic -net tap,"helper=/path/to/qemu-bridge-helper" |
| @end example |
| |
| @item -netdev bridge,id=@var{id}[,br=@var{bridge}][,helper=@var{helper}] |
| @item -net bridge[,vlan=@var{n}][,name=@var{name}][,br=@var{bridge}][,helper=@var{helper}] |
| Connect a host TAP network interface to a host bridge device. |
| |
| Use the network helper @var{helper} to configure the TAP interface and |
| attach it to the bridge. The default network helper executable is |
| @file{/path/to/qemu-bridge-helper} and the default bridge |
| device is @file{br0}. |
| |
| Examples: |
| |
| @example |
| #launch a QEMU instance with the default network helper to |
| #connect a TAP device to bridge br0 |
| qemu-system-i386 linux.img -net bridge -net nic,model=virtio |
| @end example |
| |
| @example |
| #launch a QEMU instance with the default network helper to |
| #connect a TAP device to bridge qemubr0 |
| qemu-system-i386 linux.img -net bridge,br=qemubr0 -net nic,model=virtio |
| @end example |
| |
| @item -netdev socket,id=@var{id}[,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] |
| @item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}] [,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] |
| |
| Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual |
| machine using a TCP socket connection. If @option{listen} is |
| specified, QEMU waits for incoming connections on @var{port} |
| (@var{host} is optional). @option{connect} is used to connect to |
| another QEMU instance using the @option{listen} option. @option{fd}=@var{h} |
| specifies an already opened TCP socket. |
| |
| Example: |
| @example |
| # launch a first QEMU instance |
| qemu-system-i386 linux.img \ |
| -net nic,macaddr=52:54:00:12:34:56 \ |
| -net socket,listen=:1234 |
| # connect the VLAN 0 of this instance to the VLAN 0 |
| # of the first instance |
| qemu-system-i386 linux.img \ |
| -net nic,macaddr=52:54:00:12:34:57 \ |
| -net socket,connect=127.0.0.1:1234 |
| @end example |
| |
| @item -netdev socket,id=@var{id}[,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] |
| @item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] |
| |
| Create a VLAN @var{n} shared with another QEMU virtual |
| machines using a UDP multicast socket, effectively making a bus for |
| every QEMU with same multicast address @var{maddr} and @var{port}. |
| NOTES: |
| @enumerate |
| @item |
| Several QEMU can be running on different hosts and share same bus (assuming |
| correct multicast setup for these hosts). |
| @item |
| mcast support is compatible with User Mode Linux (argument @option{eth@var{N}=mcast}), see |
| @url{http://user-mode-linux.sf.net}. |
| @item |
| Use @option{fd=h} to specify an already opened UDP multicast socket. |
| @end enumerate |
| |
| Example: |
| @example |
| # launch one QEMU instance |
| qemu-system-i386 linux.img \ |
| -net nic,macaddr=52:54:00:12:34:56 \ |
| -net socket,mcast=230.0.0.1:1234 |
| # launch another QEMU instance on same "bus" |
| qemu-system-i386 linux.img \ |
| -net nic,macaddr=52:54:00:12:34:57 \ |
| -net socket,mcast=230.0.0.1:1234 |
| # launch yet another QEMU instance on same "bus" |
| qemu-system-i386 linux.img \ |
| -net nic,macaddr=52:54:00:12:34:58 \ |
| -net socket,mcast=230.0.0.1:1234 |
| @end example |
| |
| Example (User Mode Linux compat.): |
| @example |
| # launch QEMU instance (note mcast address selected |
| # is UML's default) |
| qemu-system-i386 linux.img \ |
| -net nic,macaddr=52:54:00:12:34:56 \ |
| -net socket,mcast=239.192.168.1:1102 |
| # launch UML |
| /path/to/linux ubd0=/path/to/root_fs eth0=mcast |
| @end example |
| |
| Example (send packets from host's 1.2.3.4): |
| @example |
| qemu-system-i386 linux.img \ |
| -net nic,macaddr=52:54:00:12:34:56 \ |
| -net socket,mcast=239.192.168.1:1102,localaddr=1.2.3.4 |
| @end example |
| |
| @item -netdev l2tpv3,id=@var{id},src=@var{srcaddr},dst=@var{dstaddr}[,srcport=@var{srcport}][,dstport=@var{dstport}],txsession=@var{txsession}[,rxsession=@var{rxsession}][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=@var{txcookie}][,rxcookie=@var{rxcookie}][,offset=@var{offset}] |
| @item -net l2tpv3[,vlan=@var{n}][,name=@var{name}],src=@var{srcaddr},dst=@var{dstaddr}[,srcport=@var{srcport}][,dstport=@var{dstport}],txsession=@var{txsession}[,rxsession=@var{rxsession}][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=@var{txcookie}][,rxcookie=@var{rxcookie}][,offset=@var{offset}] |
| Connect VLAN @var{n} to L2TPv3 pseudowire. L2TPv3 (RFC3391) is a popular |
| protocol to transport Ethernet (and other Layer 2) data frames between |
| two systems. It is present in routers, firewalls and the Linux kernel |
| (from version 3.3 onwards). |
| |
| This transport allows a VM to communicate to another VM, router or firewall directly. |
| |
| @item src=@var{srcaddr} |
| source address (mandatory) |
| @item dst=@var{dstaddr} |
| destination address (mandatory) |
| @item udp |
| select udp encapsulation (default is ip). |
| @item srcport=@var{srcport} |
| source udp port. |
| @item dstport=@var{dstport} |
| destination udp port. |
| @item ipv6 |
| force v6, otherwise defaults to v4. |
| @item rxcookie=@var{rxcookie} |
| @item txcookie=@var{txcookie} |
| Cookies are a weak form of security in the l2tpv3 specification. |
| Their function is mostly to prevent misconfiguration. By default they are 32 |
| bit. |
| @item cookie64 |
| Set cookie size to 64 bit instead of the default 32 |
| @item counter=off |
| Force a 'cut-down' L2TPv3 with no counter as in |
| draft-mkonstan-l2tpext-keyed-ipv6-tunnel-00 |
| @item pincounter=on |
| Work around broken counter handling in peer. This may also help on |
| networks which have packet reorder. |
| @item offset=@var{offset} |
| Add an extra offset between header and data |
| |
| For example, to attach a VM running on host 4.3.2.1 via L2TPv3 to the bridge br-lan |
| on the remote Linux host 1.2.3.4: |
| @example |
| # Setup tunnel on linux host using raw ip as encapsulation |
| # on 1.2.3.4 |
| ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \ |
| encap udp udp_sport 16384 udp_dport 16384 |
| ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \ |
| 0xFFFFFFFF peer_session_id 0xFFFFFFFF |
| ifconfig vmtunnel0 mtu 1500 |
| ifconfig vmtunnel0 up |
| brctl addif br-lan vmtunnel0 |
| |
| |
| # on 4.3.2.1 |
| # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter |
| |
| qemu-system-i386 linux.img -net nic -net l2tpv3,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter |
| |
| |
| @end example |
| |
| @item -netdev vde,id=@var{id}[,sock=@var{socketpath}][,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] |
| @item -net vde[,vlan=@var{n}][,name=@var{name}][,sock=@var{socketpath}] [,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] |
| Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and |
| listening for incoming connections on @var{socketpath}. Use GROUP @var{groupname} |
| and MODE @var{octalmode} to change default ownership and permissions for |
| communication port. This option is only available if QEMU has been compiled |
| with vde support enabled. |
| |
| Example: |
| @example |
| # launch vde switch |
| vde_switch -F -sock /tmp/myswitch |
| # launch QEMU instance |
| qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch |
| @end example |
| |
| @item -netdev hubport,id=@var{id},hubid=@var{hubid} |
| |
| Create a hub port on QEMU "vlan" @var{hubid}. |
| |
| The hubport netdev lets you connect a NIC to a QEMU "vlan" instead of a single |
| netdev. @code{-net} and @code{-device} with parameter @option{vlan} create the |
| required hub automatically. |
| |
| @item -netdev vhost-user,chardev=@var{id}[,vhostforce=on|off] |
| |
| Establish a vhost-user netdev, backed by a chardev @var{id}. The chardev should |
| be a unix domain socket backed one. The vhost-user uses a specifically defined |
| protocol to pass vhost ioctl replacement messages to an application on the other |
| end of the socket. On non-MSIX guests, the feature can be forced with |
| @var{vhostforce}. |
| |
| Example: |
| @example |
| qemu -m 512 -object memory-backend-file,id=mem,size=512M,mem-path=/hugetlbfs,share=on \ |
| -numa node,memdev=mem \ |
| -chardev socket,path=/path/to/socket \ |
| -netdev type=vhost-user,id=net0,chardev=chr0 \ |
| -device virtio-net-pci,netdev=net0 |
| @end example |
| |
| @item -net dump[,vlan=@var{n}][,file=@var{file}][,len=@var{len}] |
| Dump network traffic on VLAN @var{n} to file @var{file} (@file{qemu-vlan0.pcap} by default). |
| At most @var{len} bytes (64k by default) per packet are stored. The file format is |
| libpcap, so it can be analyzed with tools such as tcpdump or Wireshark. |
| |
| @item -net none |
| Indicate that no network devices should be configured. It is used to |
| override the default configuration (@option{-net nic -net user}) which |
| is activated if no @option{-net} options are provided. |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| DEFHEADING(Character device options:) |
| STEXI |
| |
| The general form of a character device option is: |
| @table @option |
| ETEXI |
| |
| DEF("chardev", HAS_ARG, QEMU_OPTION_chardev, |
| "-chardev null,id=id[,mux=on|off]\n" |
| "-chardev socket,id=id[,host=host],port=port[,to=to][,ipv4][,ipv6][,nodelay][,reconnect=seconds]\n" |
| " [,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off] (tcp)\n" |
| "-chardev socket,id=id,path=path[,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off] (unix)\n" |
| "-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n" |
| " [,localport=localport][,ipv4][,ipv6][,mux=on|off]\n" |
| "-chardev msmouse,id=id[,mux=on|off]\n" |
| "-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n" |
| " [,mux=on|off]\n" |
| "-chardev ringbuf,id=id[,size=size]\n" |
| "-chardev file,id=id,path=path[,mux=on|off]\n" |
| "-chardev pipe,id=id,path=path[,mux=on|off]\n" |
| #ifdef _WIN32 |
| "-chardev console,id=id[,mux=on|off]\n" |
| "-chardev serial,id=id,path=path[,mux=on|off]\n" |
| #else |
| "-chardev pty,id=id[,mux=on|off]\n" |
| "-chardev stdio,id=id[,mux=on|off][,signal=on|off]\n" |
| #endif |
| #ifdef CONFIG_BRLAPI |
| "-chardev braille,id=id[,mux=on|off]\n" |
| #endif |
| #if defined(__linux__) || defined(__sun__) || defined(__FreeBSD__) \ |
| || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) |
| "-chardev serial,id=id,path=path[,mux=on|off]\n" |
| "-chardev tty,id=id,path=path[,mux=on|off]\n" |
| #endif |
| #if defined(__linux__) || defined(__FreeBSD__) || defined(__DragonFly__) |
| "-chardev parallel,id=id,path=path[,mux=on|off]\n" |
| "-chardev parport,id=id,path=path[,mux=on|off]\n" |
| #endif |
| #if defined(CONFIG_SPICE) |
| "-chardev spicevmc,id=id,name=name[,debug=debug]\n" |
| "-chardev spiceport,id=id,name=name[,debug=debug]\n" |
| #endif |
| , QEMU_ARCH_ALL |
| ) |
| |
| STEXI |
| @item -chardev @var{backend} ,id=@var{id} [,mux=on|off] [,@var{options}] |
| @findex -chardev |
| Backend is one of: |
| @option{null}, |
| @option{socket}, |
| @option{udp}, |
| @option{msmouse}, |
| @option{vc}, |
| @option{ringbuf}, |
| @option{file}, |
| @option{pipe}, |
| @option{console}, |
| @option{serial}, |
| @option{pty}, |
| @option{stdio}, |
| @option{braille}, |
| @option{tty}, |
| @option{parallel}, |
| @option{parport}, |
| @option{spicevmc}. |
| @option{spiceport}. |
| The specific backend will determine the applicable options. |
| |
| All devices must have an id, which can be any string up to 127 characters long. |
| It is used to uniquely identify this device in other command line directives. |
| |
| A character device may be used in multiplexing mode by multiple front-ends. |
| The key sequence of @key{Control-a} and @key{c} will rotate the input focus |
| between attached front-ends. Specify @option{mux=on} to enable this mode. |
| |
| Options to each backend are described below. |
| |
| @item -chardev null ,id=@var{id} |
| A void device. This device will not emit any data, and will drop any data it |
| receives. The null backend does not take any options. |
| |
| @item -chardev socket ,id=@var{id} [@var{TCP options} or @var{unix options}] [,server] [,nowait] [,telnet] [,reconnect=@var{seconds}] |
| |
| Create a two-way stream socket, which can be either a TCP or a unix socket. A |
| unix socket will be created if @option{path} is specified. Behaviour is |
| undefined if TCP options are specified for a unix socket. |
| |
| @option{server} specifies that the socket shall be a listening socket. |
| |
| @option{nowait} specifies that QEMU should not block waiting for a client to |
| connect to a listening socket. |
| |
| @option{telnet} specifies that traffic on the socket should interpret telnet |
| escape sequences. |
| |
| @option{reconnect} sets the timeout for reconnecting on non-server sockets when |
| the remote end goes away. qemu will delay this many seconds and then attempt |
| to reconnect. Zero disables reconnecting, and is the default. |
| |
| TCP and unix socket options are given below: |
| |
| @table @option |
| |
| @item TCP options: port=@var{port} [,host=@var{host}] [,to=@var{to}] [,ipv4] [,ipv6] [,nodelay] |
| |
| @option{host} for a listening socket specifies the local address to be bound. |
| For a connecting socket species the remote host to connect to. @option{host} is |
| optional for listening sockets. If not specified it defaults to @code{0.0.0.0}. |
| |
| @option{port} for a listening socket specifies the local port to be bound. For a |
| connecting socket specifies the port on the remote host to connect to. |
| @option{port} can be given as either a port number or a service name. |
| @option{port} is required. |
| |
| @option{to} is only relevant to listening sockets. If it is specified, and |
| @option{port} cannot be bound, QEMU will attempt to bind to subsequent ports up |
| to and including @option{to} until it succeeds. @option{to} must be specified |
| as a port number. |
| |
| @option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. |
| If neither is specified the socket may use either protocol. |
| |
| @option{nodelay} disables the Nagle algorithm. |
| |
| @item unix options: path=@var{path} |
| |
| @option{path} specifies the local path of the unix socket. @option{path} is |
| required. |
| |
| @end table |
| |
| @item -chardev udp ,id=@var{id} [,host=@var{host}] ,port=@var{port} [,localaddr=@var{localaddr}] [,localport=@var{localport}] [,ipv4] [,ipv6] |
| |
| Sends all traffic from the guest to a remote host over UDP. |
| |
| @option{host} specifies the remote host to connect to. If not specified it |
| defaults to @code{localhost}. |
| |
| @option{port} specifies the port on the remote host to connect to. @option{port} |
| is required. |
| |
| @option{localaddr} specifies the local address to bind to. If not specified it |
| defaults to @code{0.0.0.0}. |
| |
| @option{localport} specifies the local port to bind to. If not specified any |
| available local port will be used. |
| |
| @option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. |
| If neither is specified the device may use either protocol. |
| |
| @item -chardev msmouse ,id=@var{id} |
| |
| Forward QEMU's emulated msmouse events to the guest. @option{msmouse} does not |
| take any options. |
| |
| @item -chardev vc ,id=@var{id} [[,width=@var{width}] [,height=@var{height}]] [[,cols=@var{cols}] [,rows=@var{rows}]] |
| |
| Connect to a QEMU text console. @option{vc} may optionally be given a specific |
| size. |
| |
| @option{width} and @option{height} specify the width and height respectively of |
| the console, in pixels. |
| |
| @option{cols} and @option{rows} specify that the console be sized to fit a text |
| console with the given dimensions. |
| |
| @item -chardev ringbuf ,id=@var{id} [,size=@var{size}] |
| |
| Create a ring buffer with fixed size @option{size}. |
| @var{size} must be a power of two, and defaults to @code{64K}). |
| |
| @item -chardev file ,id=@var{id} ,path=@var{path} |
| |
| Log all traffic received from the guest to a file. |
| |
| @option{path} specifies the path of the file to be opened. This file will be |
| created if it does not already exist, and overwritten if it does. @option{path} |
| is required. |
| |
| @item -chardev pipe ,id=@var{id} ,path=@var{path} |
| |
| Create a two-way connection to the guest. The behaviour differs slightly between |
| Windows hosts and other hosts: |
| |
| On Windows, a single duplex pipe will be created at |
| @file{\\.pipe\@option{path}}. |
| |
| On other hosts, 2 pipes will be created called @file{@option{path}.in} and |
| @file{@option{path}.out}. Data written to @file{@option{path}.in} will be |
| received by the guest. Data written by the guest can be read from |
| @file{@option{path}.out}. QEMU will not create these fifos, and requires them to |
| be present. |
| |
| @option{path} forms part of the pipe path as described above. @option{path} is |
| required. |
| |
| @item -chardev console ,id=@var{id} |
| |
| Send traffic from the guest to QEMU's standard output. @option{console} does not |
| take any options. |
| |
| @option{console} is only available on Windows hosts. |
| |
| @item -chardev serial ,id=@var{id} ,path=@option{path} |
| |
| Send traffic from the guest to a serial device on the host. |
| |
| On Unix hosts serial will actually accept any tty device, |
| not only serial lines. |
| |
| @option{path} specifies the name of the serial device to open. |
| |
| @item -chardev pty ,id=@var{id} |
| |
| Create a new pseudo-terminal on the host and connect to it. @option{pty} does |
| not take any options. |
| |
| @option{pty} is not available on Windows hosts. |
| |
| @item -chardev stdio ,id=@var{id} [,signal=on|off] |
| Connect to standard input and standard output of the QEMU process. |
| |
| @option{signal} controls if signals are enabled on the terminal, that includes |
| exiting QEMU with the key sequence @key{Control-c}. This option is enabled by |
| default, use @option{signal=off} to disable it. |
| |
| @option{stdio} is not available on Windows hosts. |
| |
| @item -chardev braille ,id=@var{id} |
| |
| Connect to a local BrlAPI server. @option{braille} does not take any options. |
| |
| @item -chardev tty ,id=@var{id} ,path=@var{path} |
| |
| @option{tty} is only available on Linux, Sun, FreeBSD, NetBSD, OpenBSD and |
| DragonFlyBSD hosts. It is an alias for @option{serial}. |
| |
| @option{path} specifies the path to the tty. @option{path} is required. |
| |
| @item -chardev parallel ,id=@var{id} ,path=@var{path} |
| @item -chardev parport ,id=@var{id} ,path=@var{path} |
| |
| @option{parallel} is only available on Linux, FreeBSD and DragonFlyBSD hosts. |
| |
| Connect to a local parallel port. |
| |
| @option{path} specifies the path to the parallel port device. @option{path} is |
| required. |
| |
| @item -chardev spicevmc ,id=@var{id} ,debug=@var{debug}, name=@var{name} |
| |
| @option{spicevmc} is only available when spice support is built in. |
| |
| @option{debug} debug level for spicevmc |
| |
| @option{name} name of spice channel to connect to |
| |
| Connect to a spice virtual machine channel, such as vdiport. |
| |
| @item -chardev spiceport ,id=@var{id} ,debug=@var{debug}, name=@var{name} |
| |
| @option{spiceport} is only available when spice support is built in. |
| |
| @option{debug} debug level for spicevmc |
| |
| @option{name} name of spice port to connect to |
| |
| Connect to a spice port, allowing a Spice client to handle the traffic |
| identified by a name (preferably a fqdn). |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| DEFHEADING(Device URL Syntax:) |
| STEXI |
| |
| In addition to using normal file images for the emulated storage devices, |
| QEMU can also use networked resources such as iSCSI devices. These are |
| specified using a special URL syntax. |
| |
| @table @option |
| @item iSCSI |
| iSCSI support allows QEMU to access iSCSI resources directly and use as |
| images for the guest storage. Both disk and cdrom images are supported. |
| |
| Syntax for specifying iSCSI LUNs is |
| ``iscsi://<target-ip>[:<port>]/<target-iqn>/<lun>'' |
| |
| By default qemu will use the iSCSI initiator-name |
| 'iqn.2008-11.org.linux-kvm[:<name>]' but this can also be set from the command |
| line or a configuration file. |
| |
| |
| Example (without authentication): |
| @example |
| qemu-system-i386 -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ |
| -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ |
| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 |
| @end example |
| |
| Example (CHAP username/password via URL): |
| @example |
| qemu-system-i386 -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1 |
| @end example |
| |
| Example (CHAP username/password via environment variables): |
| @example |
| LIBISCSI_CHAP_USERNAME="user" \ |
| LIBISCSI_CHAP_PASSWORD="password" \ |
| qemu-system-i386 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 |
| @end example |
| |
| iSCSI support is an optional feature of QEMU and only available when |
| compiled and linked against libiscsi. |
| ETEXI |
| DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi, |
| "-iscsi [user=user][,password=password]\n" |
| " [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n" |
| " [,initiator-name=initiator-iqn][,id=target-iqn]\n" |
| " iSCSI session parameters\n", QEMU_ARCH_ALL) |
| STEXI |
| |
| iSCSI parameters such as username and password can also be specified via |
| a configuration file. See qemu-doc for more information and examples. |
| |
| @item NBD |
| QEMU supports NBD (Network Block Devices) both using TCP protocol as well |
| as Unix Domain Sockets. |
| |
| Syntax for specifying a NBD device using TCP |
| ``nbd:<server-ip>:<port>[:exportname=<export>]'' |
| |
| Syntax for specifying a NBD device using Unix Domain Sockets |
| ``nbd:unix:<domain-socket>[:exportname=<export>]'' |
| |
| |
| Example for TCP |
| @example |
| qemu-system-i386 --drive file=nbd:192.0.2.1:30000 |
| @end example |
| |
| Example for Unix Domain Sockets |
| @example |
| qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket |
| @end example |
| |
| @item SSH |
| QEMU supports SSH (Secure Shell) access to remote disks. |
| |
| Examples: |
| @example |
| qemu-system-i386 -drive file=ssh://user@@host/path/to/disk.img |
| qemu-system-i386 -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img |
| @end example |
| |
| Currently authentication must be done using ssh-agent. Other |
| authentication methods may be supported in future. |
| |
| @item Sheepdog |
| Sheepdog is a distributed storage system for QEMU. |
| QEMU supports using either local sheepdog devices or remote networked |
| devices. |
| |
| Syntax for specifying a sheepdog device |
| @example |
| sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag] |
| @end example |
| |
| Example |
| @example |
| qemu-system-i386 --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine |
| @end example |
| |
| See also @url{http://http://www.osrg.net/sheepdog/}. |
| |
| @item GlusterFS |
| GlusterFS is an user space distributed file system. |
| QEMU supports the use of GlusterFS volumes for hosting VM disk images using |
| TCP, Unix Domain Sockets and RDMA transport protocols. |
| |
| Syntax for specifying a VM disk image on GlusterFS volume is |
| @example |
| gluster[+transport]://[server[:port]]/volname/image[?socket=...] |
| @end example |
| |
| |
| Example |
| @example |
| qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img |
| @end example |
| |
| See also @url{http://www.gluster.org}. |
| |
| @item HTTP/HTTPS/FTP/FTPS/TFTP |
| QEMU supports read-only access to files accessed over http(s), ftp(s) and tftp. |
| |
| Syntax using a single filename: |
| @example |
| <protocol>://[<username>[:<password>]@@]<host>/<path> |
| @end example |
| |
| where: |
| @table @option |
| @item protocol |
| 'http', 'https', 'ftp', 'ftps', or 'tftp'. |
| |
| @item username |
| Optional username for authentication to the remote server. |
| |
| @item password |
| Optional password for authentication to the remote server. |
| |
| @item host |
| Address of the remote server. |
| |
| @item path |
| Path on the remote server, including any query string. |
| @end table |
| |
| The following options are also supported: |
| @table @option |
| @item url |
| The full URL when passing options to the driver explicitly. |
| |
| @item readahead |
| The amount of data to read ahead with each range request to the remote server. |
| This value may optionally have the suffix 'T', 'G', 'M', 'K', 'k' or 'b'. If it |
| does not have a suffix, it will be assumed to be in bytes. The value must be a |
| multiple of 512 bytes. It defaults to 256k. |
| |
| @item sslverify |
| Whether to verify the remote server's certificate when connecting over SSL. It |
| can have the value 'on' or 'off'. It defaults to 'on'. |
| |
| @item cookie |
| Send this cookie (it can also be a list of cookies separated by ';') with |
| each outgoing request. Only supported when using protocols such as HTTP |
| which support cookies, otherwise ignored. |
| |
| @item timeout |
| Set the timeout in seconds of the CURL connection. This timeout is the time |
| that CURL waits for a response from the remote server to get the size of the |
| image to be downloaded. If not set, the default timeout of 5 seconds is used. |
| @end table |
| |
| Note that when passing options to qemu explicitly, @option{driver} is the value |
| of <protocol>. |
| |
| Example: boot from a remote Fedora 20 live ISO image |
| @example |
| qemu-system-x86_64 --drive media=cdrom,file=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly |
| |
| qemu-system-x86_64 --drive media=cdrom,file.driver=http,file.url=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly |
| @end example |
| |
| Example: boot from a remote Fedora 20 cloud image using a local overlay for |
| writes, copy-on-read, and a readahead of 64k |
| @example |
| qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"https://dl.fedoraproject.org/pub/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2 |
| |
| qemu-system-x86_64 -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on |
| @end example |
| |
| Example: boot from an image stored on a VMware vSphere server with a self-signed |
| certificate using a local overlay for writes, a readahead of 64k and a timeout |
| of 10 seconds. |
| @example |
| qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"https",, "file.url":"https://user:password@@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k",, "file.timeout":10@}' /tmp/test.qcow2 |
| |
| qemu-system-x86_64 -drive file=/tmp/test.qcow2 |
| @end example |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| |
| DEFHEADING(Bluetooth(R) options:) |
| STEXI |
| @table @option |
| ETEXI |
| |
| DEF("bt", HAS_ARG, QEMU_OPTION_bt, \ |
| "-bt hci,null dumb bluetooth HCI - doesn't respond to commands\n" \ |
| "-bt hci,host[:id]\n" \ |
| " use host's HCI with the given name\n" \ |
| "-bt hci[,vlan=n]\n" \ |
| " emulate a standard HCI in virtual scatternet 'n'\n" \ |
| "-bt vhci[,vlan=n]\n" \ |
| " add host computer to virtual scatternet 'n' using VHCI\n" \ |
| "-bt device:dev[,vlan=n]\n" \ |
| " emulate a bluetooth device 'dev' in scatternet 'n'\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -bt hci[...] |
| @findex -bt |
| Defines the function of the corresponding Bluetooth HCI. -bt options |
| are matched with the HCIs present in the chosen machine type. For |
| example when emulating a machine with only one HCI built into it, only |
| the first @code{-bt hci[...]} option is valid and defines the HCI's |
| logic. The Transport Layer is decided by the machine type. Currently |
| the machines @code{n800} and @code{n810} have one HCI and all other |
| machines have none. |
| |
| @anchor{bt-hcis} |
| The following three types are recognized: |
| |
| @table @option |
| @item -bt hci,null |
| (default) The corresponding Bluetooth HCI assumes no internal logic |
| and will not respond to any HCI commands or emit events. |
| |
| @item -bt hci,host[:@var{id}] |
| (@code{bluez} only) The corresponding HCI passes commands / events |
| to / from the physical HCI identified by the name @var{id} (default: |
| @code{hci0}) on the computer running QEMU. Only available on @code{bluez} |
| capable systems like Linux. |
| |
| @item -bt hci[,vlan=@var{n}] |
| Add a virtual, standard HCI that will participate in the Bluetooth |
| scatternet @var{n} (default @code{0}). Similarly to @option{-net} |
| VLANs, devices inside a bluetooth network @var{n} can only communicate |
| with other devices in the same network (scatternet). |
| @end table |
| |
| @item -bt vhci[,vlan=@var{n}] |
| (Linux-host only) Create a HCI in scatternet @var{n} (default 0) attached |
| to the host bluetooth stack instead of to the emulated target. This |
| allows the host and target machines to participate in a common scatternet |
| and communicate. Requires the Linux @code{vhci} driver installed. Can |
| be used as following: |
| |
| @example |
| qemu-system-i386 [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5 |
| @end example |
| |
| @item -bt device:@var{dev}[,vlan=@var{n}] |
| Emulate a bluetooth device @var{dev} and place it in network @var{n} |
| (default @code{0}). QEMU can only emulate one type of bluetooth devices |
| currently: |
| |
| @table @option |
| @item keyboard |
| Virtual wireless keyboard implementing the HIDP bluetooth profile. |
| @end table |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| #ifdef CONFIG_TPM |
| DEFHEADING(TPM device options:) |
| |
| DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \ |
| "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n" |
| " use path to provide path to a character device; default is /dev/tpm0\n" |
| " use cancel-path to provide path to TPM's cancel sysfs entry; if\n" |
| " not provided it will be searched for in /sys/class/misc/tpm?/device\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| |
| The general form of a TPM device option is: |
| @table @option |
| |
| @item -tpmdev @var{backend} ,id=@var{id} [,@var{options}] |
| @findex -tpmdev |
| Backend type must be: |
| @option{passthrough}. |
| |
| The specific backend type will determine the applicable options. |
| The @code{-tpmdev} option creates the TPM backend and requires a |
| @code{-device} option that specifies the TPM frontend interface model. |
| |
| Options to each backend are described below. |
| |
| Use 'help' to print all available TPM backend types. |
| @example |
| qemu -tpmdev help |
| @end example |
| |
| @item -tpmdev passthrough, id=@var{id}, path=@var{path}, cancel-path=@var{cancel-path} |
| |
| (Linux-host only) Enable access to the host's TPM using the passthrough |
| driver. |
| |
| @option{path} specifies the path to the host's TPM device, i.e., on |
| a Linux host this would be @code{/dev/tpm0}. |
| @option{path} is optional and by default @code{/dev/tpm0} is used. |
| |
| @option{cancel-path} specifies the path to the host TPM device's sysfs |
| entry allowing for cancellation of an ongoing TPM command. |
| @option{cancel-path} is optional and by default QEMU will search for the |
| sysfs entry to use. |
| |
| Some notes about using the host's TPM with the passthrough driver: |
| |
| The TPM device accessed by the passthrough driver must not be |
| used by any other application on the host. |
| |
| Since the host's firmware (BIOS/UEFI) has already initialized the TPM, |
| the VM's firmware (BIOS/UEFI) will not be able to initialize the |
| TPM again and may therefore not show a TPM-specific menu that would |
| otherwise allow the user to configure the TPM, e.g., allow the user to |
| enable/disable or activate/deactivate the TPM. |
| Further, if TPM ownership is released from within a VM then the host's TPM |
| will get disabled and deactivated. To enable and activate the |
| TPM again afterwards, the host has to be rebooted and the user is |
| required to enter the firmware's menu to enable and activate the TPM. |
| If the TPM is left disabled and/or deactivated most TPM commands will fail. |
| |
| To create a passthrough TPM use the following two options: |
| @example |
| -tpmdev passthrough,id=tpm0 -device tpm-tis,tpmdev=tpm0 |
| @end example |
| Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by |
| @code{tpmdev=tpm0} in the device option. |
| |
| @end table |
| |
| ETEXI |
| |
| DEFHEADING() |
| |
| #endif |
| |
| DEFHEADING(Linux/Multiboot boot specific:) |
| STEXI |
| |
| When using these options, you can use a given Linux or Multiboot |
| kernel without installing it in the disk image. It can be useful |
| for easier testing of various kernels. |
| |
| @table @option |
| ETEXI |
| |
| DEF("kernel", HAS_ARG, QEMU_OPTION_kernel, \ |
| "-kernel bzImage use 'bzImage' as kernel image\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -kernel @var{bzImage} |
| @findex -kernel |
| Use @var{bzImage} as kernel image. The kernel can be either a Linux kernel |
| or in multiboot format. |
| ETEXI |
| |
| DEF("append", HAS_ARG, QEMU_OPTION_append, \ |
| "-append cmdline use 'cmdline' as kernel command line\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -append @var{cmdline} |
| @findex -append |
| Use @var{cmdline} as kernel command line |
| ETEXI |
| |
| DEF("initrd", HAS_ARG, QEMU_OPTION_initrd, \ |
| "-initrd file use 'file' as initial ram disk\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -initrd @var{file} |
| @findex -initrd |
| Use @var{file} as initial ram disk. |
| |
| @item -initrd "@var{file1} arg=foo,@var{file2}" |
| |
| This syntax is only available with multiboot. |
| |
| Use @var{file1} and @var{file2} as modules and pass arg=foo as parameter to the |
| first module. |
| ETEXI |
| |
| DEF("dtb", HAS_ARG, QEMU_OPTION_dtb, \ |
| "-dtb file use 'file' as device tree image\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -dtb @var{file} |
| @findex -dtb |
| Use @var{file} as a device tree binary (dtb) image and pass it to the kernel |
| on boot. |
| ETEXI |
| |
| STEXI |
| @end table |
| ETEXI |
| DEFHEADING() |
| |
| DEFHEADING(Debug/Expert options:) |
| STEXI |
| @table @option |
| ETEXI |
| |
| DEF("serial", HAS_ARG, QEMU_OPTION_serial, \ |
| "-serial dev redirect the serial port to char device 'dev'\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -serial @var{dev} |
| @findex -serial |
| Redirect the virtual serial port to host character device |
| @var{dev}. The default device is @code{vc} in graphical mode and |
| @code{stdio} in non graphical mode. |
| |
| This option can be used several times to simulate up to 4 serial |
| ports. |
| |
| Use @code{-serial none} to disable all serial ports. |
| |
| Available character devices are: |
| @table @option |
| @item vc[:@var{W}x@var{H}] |
| Virtual console. Optionally, a width and height can be given in pixel with |
| @example |
| vc:800x600 |
| @end example |
| It is also possible to specify width or height in characters: |
| @example |
| vc:80Cx24C |
| @end example |
| @item pty |
| [Linux only] Pseudo TTY (a new PTY is automatically allocated) |
| @item none |
| No device is allocated. |
| @item null |
| void device |
| @item chardev:@var{id} |
| Use a named character device defined with the @code{-chardev} option. |
| @item /dev/XXX |
| [Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port |
| parameters are set according to the emulated ones. |
| @item /dev/parport@var{N} |
| [Linux only, parallel port only] Use host parallel port |
| @var{N}. Currently SPP and EPP parallel port features can be used. |
| @item file:@var{filename} |
| Write output to @var{filename}. No character can be read. |
| @item stdio |
| [Unix only] standard input/output |
| @item pipe:@var{filename} |
| name pipe @var{filename} |
| @item COM@var{n} |
| [Windows only] Use host serial port @var{n} |
| @item udp:[@var{remote_host}]:@var{remote_port}[@@[@var{src_ip}]:@var{src_port}] |
| This implements UDP Net Console. |
| When @var{remote_host} or @var{src_ip} are not specified |
| they default to @code{0.0.0.0}. |
| When not using a specified @var{src_port} a random port is automatically chosen. |
| |
| If you just want a simple readonly console you can use @code{netcat} or |
| @code{nc}, by starting QEMU with: @code{-serial udp::4555} and nc as: |
| @code{nc -u -l -p 4555}. Any time QEMU writes something to that port it |
| will appear in the netconsole session. |
| |
| If you plan to send characters back via netconsole or you want to stop |
| and start QEMU a lot of times, you should have QEMU use the same |
| source port each time by using something like @code{-serial |
| udp::4555@@:4556} to QEMU. Another approach is to use a patched |
| version of netcat which can listen to a TCP port and send and receive |
| characters via udp. If you have a patched version of netcat which |
| activates telnet remote echo and single char transfer, then you can |
| use the following options to step up a netcat redirector to allow |
| telnet on port 5555 to access the QEMU port. |
| @table @code |
| @item QEMU Options: |
| -serial udp::4555@@:4556 |
| @item netcat options: |
| -u -P 4555 -L 0.0.0.0:4556 -t -p 5555 -I -T |
| @item telnet options: |
| localhost 5555 |
| @end table |
| |
| @item tcp:[@var{host}]:@var{port}[,@var{server}][,nowait][,nodelay][,reconnect=@var{seconds}] |
| The TCP Net Console has two modes of operation. It can send the serial |
| I/O to a location or wait for a connection from a location. By default |
| the TCP Net Console is sent to @var{host} at the @var{port}. If you use |
| the @var{server} option QEMU will wait for a client socket application |
| to connect to the port before continuing, unless the @code{nowait} |
| option was specified. The @code{nodelay} option disables the Nagle buffering |
| algorithm. The @code{reconnect} option only applies if @var{noserver} is |
| set, if the connection goes down it will attempt to reconnect at the |
| given interval. If @var{host} is omitted, 0.0.0.0 is assumed. Only |
| one TCP connection at a time is accepted. You can use @code{telnet} to |
| connect to the corresponding character device. |
| @table @code |
| @item Example to send tcp console to 192.168.0.2 port 4444 |
| -serial tcp:192.168.0.2:4444 |
| @item Example to listen and wait on port 4444 for connection |
| -serial tcp::4444,server |
| @item Example to not wait and listen on ip 192.168.0.100 port 4444 |
| -serial tcp:192.168.0.100:4444,server,nowait |
| @end table |
| |
| @item telnet:@var{host}:@var{port}[,server][,nowait][,nodelay] |
| The telnet protocol is used instead of raw tcp sockets. The options |
| work the same as if you had specified @code{-serial tcp}. The |
| difference is that the port acts like a telnet server or client using |
| telnet option negotiation. This will also allow you to send the |
| MAGIC_SYSRQ sequence if you use a telnet that supports sending the break |
| sequence. Typically in unix telnet you do it with Control-] and then |
| type "send break" followed by pressing the enter key. |
| |
| @item unix:@var{path}[,server][,nowait][,reconnect=@var{seconds}] |
| A unix domain socket is used instead of a tcp socket. The option works the |
| same as if you had specified @code{-serial tcp} except the unix domain socket |
| @var{path} is used for connections. |
| |
| @item mon:@var{dev_string} |
| This is a special option to allow the monitor to be multiplexed onto |
| another serial port. The monitor is accessed with key sequence of |
| @key{Control-a} and then pressing @key{c}. |
| @var{dev_string} should be any one of the serial devices specified |
| above. An example to multiplex the monitor onto a telnet server |
| listening on port 4444 would be: |
| @table @code |
| @item -serial mon:telnet::4444,server,nowait |
| @end table |
| When the monitor is multiplexed to stdio in this way, Ctrl+C will not terminate |
| QEMU any more but will be passed to the guest instead. |
| |
| @item braille |
| Braille device. This will use BrlAPI to display the braille output on a real |
| or fake device. |
| |
| @item msmouse |
| Three button serial mouse. Configure the guest to use Microsoft protocol. |
| @end table |
| ETEXI |
| |
| DEF("parallel", HAS_ARG, QEMU_OPTION_parallel, \ |
| "-parallel dev redirect the parallel port to char device 'dev'\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -parallel @var{dev} |
| @findex -parallel |
| Redirect the virtual parallel port to host device @var{dev} (same |
| devices as the serial port). On Linux hosts, @file{/dev/parportN} can |
| be used to use hardware devices connected on the corresponding host |
| parallel port. |
| |
| This option can be used several times to simulate up to 3 parallel |
| ports. |
| |
| Use @code{-parallel none} to disable all parallel ports. |
| ETEXI |
| |
| DEF("monitor", HAS_ARG, QEMU_OPTION_monitor, \ |
| "-monitor dev redirect the monitor to char device 'dev'\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -monitor @var{dev} |
| @findex -monitor |
| Redirect the monitor to host device @var{dev} (same devices as the |
| serial port). |
| The default device is @code{vc} in graphical mode and @code{stdio} in |
| non graphical mode. |
| Use @code{-monitor none} to disable the default monitor. |
| ETEXI |
| DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \ |
| "-qmp dev like -monitor but opens in 'control' mode\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -qmp @var{dev} |
| @findex -qmp |
| Like -monitor but opens in 'control' mode. |
| ETEXI |
| |
| DEF("mon", HAS_ARG, QEMU_OPTION_mon, \ |
| "-mon [chardev=]name[,mode=readline|control][,default]\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -mon [chardev=]name[,mode=readline|control][,default] |
| @findex -mon |
| Setup monitor on chardev @var{name}. |
| ETEXI |
| |
| DEF("debugcon", HAS_ARG, QEMU_OPTION_debugcon, \ |
| "-debugcon dev redirect the debug console to char device 'dev'\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -debugcon @var{dev} |
| @findex -debugcon |
| Redirect the debug console to host device @var{dev} (same devices as the |
| serial port). The debug console is an I/O port which is typically port |
| 0xe9; writing to that I/O port sends output to this device. |
| The default device is @code{vc} in graphical mode and @code{stdio} in |
| non graphical mode. |
| ETEXI |
| |
| DEF("pidfile", HAS_ARG, QEMU_OPTION_pidfile, \ |
| "-pidfile file write PID to 'file'\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -pidfile @var{file} |
| @findex -pidfile |
| Store the QEMU process PID in @var{file}. It is useful if you launch QEMU |
| from a script. |
| ETEXI |
| |
| DEF("singlestep", 0, QEMU_OPTION_singlestep, \ |
| "-singlestep always run in singlestep mode\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -singlestep |
| @findex -singlestep |
| Run the emulation in single step mode. |
| ETEXI |
| |
| DEF("S", 0, QEMU_OPTION_S, \ |
| "-S freeze CPU at startup (use 'c' to start execution)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -S |
| @findex -S |
| Do not start CPU at startup (you must type 'c' in the monitor). |
| ETEXI |
| |
| DEF("realtime", HAS_ARG, QEMU_OPTION_realtime, |
| "-realtime [mlock=on|off]\n" |
| " run qemu with realtime features\n" |
| " mlock=on|off controls mlock support (default: on)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -realtime mlock=on|off |
| @findex -realtime |
| Run qemu with realtime features. |
| mlocking qemu and guest memory can be enabled via @option{mlock=on} |
| (enabled by default). |
| ETEXI |
| |
| DEF("gdb", HAS_ARG, QEMU_OPTION_gdb, \ |
| "-gdb dev wait for gdb connection on 'dev'\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -gdb @var{dev} |
| @findex -gdb |
| Wait for gdb connection on device @var{dev} (@pxref{gdb_usage}). Typical |
| connections will likely be TCP-based, but also UDP, pseudo TTY, or even |
| stdio are reasonable use case. The latter is allowing to start QEMU from |
| within gdb and establish the connection via a pipe: |
| @example |
| (gdb) target remote | exec qemu-system-i386 -gdb stdio ... |
| @end example |
| ETEXI |
| |
| DEF("s", 0, QEMU_OPTION_s, \ |
| "-s shorthand for -gdb tcp::" DEFAULT_GDBSTUB_PORT "\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -s |
| @findex -s |
| Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234 |
| (@pxref{gdb_usage}). |
| ETEXI |
| |
| DEF("d", HAS_ARG, QEMU_OPTION_d, \ |
| "-d item1,... enable logging of specified items (use '-d help' for a list of log items)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -d @var{item1}[,...] |
| @findex -d |
| Enable logging of specified items. Use '-d help' for a list of log items. |
| ETEXI |
| |
| DEF("D", HAS_ARG, QEMU_OPTION_D, \ |
| "-D logfile output log to logfile (default stderr)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -D @var{logfile} |
| @findex -D |
| Output log in @var{logfile} instead of to stderr |
| ETEXI |
| |
| DEF("L", HAS_ARG, QEMU_OPTION_L, \ |
| "-L path set the directory for the BIOS, VGA BIOS and keymaps\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -L @var{path} |
| @findex -L |
| Set the directory for the BIOS, VGA BIOS and keymaps. |
| ETEXI |
| |
| DEF("bios", HAS_ARG, QEMU_OPTION_bios, \ |
| "-bios file set the filename for the BIOS\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -bios @var{file} |
| @findex -bios |
| Set the filename for the BIOS. |
| ETEXI |
| |
| DEF("enable-kvm", 0, QEMU_OPTION_enable_kvm, \ |
| "-enable-kvm enable KVM full virtualization support\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -enable-kvm |
| @findex -enable-kvm |
| Enable KVM full virtualization support. This option is only available |
| if KVM support is enabled when compiling. |
| ETEXI |
| |
| DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid, |
| "-xen-domid id specify xen guest domain id\n", QEMU_ARCH_ALL) |
| DEF("xen-create", 0, QEMU_OPTION_xen_create, |
| "-xen-create create domain using xen hypercalls, bypassing xend\n" |
| " warning: should not be used when xend is in use\n", |
| QEMU_ARCH_ALL) |
| DEF("xen-attach", 0, QEMU_OPTION_xen_attach, |
| "-xen-attach attach to existing xen domain\n" |
| " xend will use this when starting QEMU\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -xen-domid @var{id} |
| @findex -xen-domid |
| Specify xen guest domain @var{id} (XEN only). |
| @item -xen-create |
| @findex -xen-create |
| Create domain using xen hypercalls, bypassing xend. |
| Warning: should not be used when xend is in use (XEN only). |
| @item -xen-attach |
| @findex -xen-attach |
| Attach to existing xen domain. |
| xend will use this when starting QEMU (XEN only). |
| ETEXI |
| |
| DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \ |
| "-no-reboot exit instead of rebooting\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -no-reboot |
| @findex -no-reboot |
| Exit instead of rebooting. |
| ETEXI |
| |
| DEF("no-shutdown", 0, QEMU_OPTION_no_shutdown, \ |
| "-no-shutdown stop before shutdown\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -no-shutdown |
| @findex -no-shutdown |
| Don't exit QEMU on guest shutdown, but instead only stop the emulation. |
| This allows for instance switching to monitor to commit changes to the |
| disk image. |
| ETEXI |
| |
| DEF("loadvm", HAS_ARG, QEMU_OPTION_loadvm, \ |
| "-loadvm [tag|id]\n" \ |
| " start right away with a saved state (loadvm in monitor)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -loadvm @var{file} |
| @findex -loadvm |
| Start right away with a saved state (@code{loadvm} in monitor) |
| ETEXI |
| |
| #ifndef _WIN32 |
| DEF("daemonize", 0, QEMU_OPTION_daemonize, \ |
| "-daemonize daemonize QEMU after initializing\n", QEMU_ARCH_ALL) |
| #endif |
| STEXI |
| @item -daemonize |
| @findex -daemonize |
| Daemonize the QEMU process after initialization. QEMU will not detach from |
| standard IO until it is ready to receive connections on any of its devices. |
| This option is a useful way for external programs to launch QEMU without having |
| to cope with initialization race conditions. |
| ETEXI |
| |
| DEF("option-rom", HAS_ARG, QEMU_OPTION_option_rom, \ |
| "-option-rom rom load a file, rom, into the option ROM space\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -option-rom @var{file} |
| @findex -option-rom |
| Load the contents of @var{file} as an option ROM. |
| This option is useful to load things like EtherBoot. |
| ETEXI |
| |
| HXCOMM Silently ignored for compatibility |
| DEF("clock", HAS_ARG, QEMU_OPTION_clock, "", QEMU_ARCH_ALL) |
| |
| HXCOMM Options deprecated by -rtc |
| DEF("localtime", 0, QEMU_OPTION_localtime, "", QEMU_ARCH_ALL) |
| DEF("startdate", HAS_ARG, QEMU_OPTION_startdate, "", QEMU_ARCH_ALL) |
| |
| DEF("rtc", HAS_ARG, QEMU_OPTION_rtc, \ |
| "-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]\n" \ |
| " set the RTC base and clock, enable drift fix for clock ticks (x86 only)\n", |
| QEMU_ARCH_ALL) |
| |
| STEXI |
| |
| @item -rtc [base=utc|localtime|@var{date}][,clock=host|vm][,driftfix=none|slew] |
| @findex -rtc |
| Specify @option{base} as @code{utc} or @code{localtime} to let the RTC start at the current |
| UTC or local time, respectively. @code{localtime} is required for correct date in |
| MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the |
| format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC. |
| |
| By default the RTC is driven by the host system time. This allows using of the |
| RTC as accurate reference clock inside the guest, specifically if the host |
| time is smoothly following an accurate external reference clock, e.g. via NTP. |
| If you want to isolate the guest time from the host, you can set @option{clock} |
| to @code{rt} instead. To even prevent it from progressing during suspension, |
| you can set it to @code{vm}. |
| |
| Enable @option{driftfix} (i386 targets only) if you experience time drift problems, |
| specifically with Windows' ACPI HAL. This option will try to figure out how |
| many timer interrupts were not processed by the Windows guest and will |
| re-inject them. |
| ETEXI |
| |
| DEF("icount", HAS_ARG, QEMU_OPTION_icount, \ |
| "-icount [shift=N|auto][,align=on|off]\n" \ |
| " enable virtual instruction counter with 2^N clock ticks per\n" \ |
| " instruction and enable aligning the host and virtual clocks\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -icount [shift=@var{N}|auto] |
| @findex -icount |
| Enable virtual instruction counter. The virtual cpu will execute one |
| instruction every 2^@var{N} ns of virtual time. If @code{auto} is specified |
| then the virtual cpu speed will be automatically adjusted to keep virtual |
| time within a few seconds of real time. |
| |
| Note that while this option can give deterministic behavior, it does not |
| provide cycle accurate emulation. Modern CPUs contain superscalar out of |
| order cores with complex cache hierarchies. The number of instructions |
| executed often has little or no correlation with actual performance. |
| |
| @option{align=on} will activate the delay algorithm which will try to |
| to synchronise the host clock and the virtual clock. The goal is to |
| have a guest running at the real frequency imposed by the shift option. |
| Whenever the guest clock is behind the host clock and if |
| @option{align=on} is specified then we print a messsage to the user |
| to inform about the delay. |
| Currently this option does not work when @option{shift} is @code{auto}. |
| Note: The sync algorithm will work for those shift values for which |
| the guest clock runs ahead of the host clock. Typically this happens |
| when the shift value is high (how high depends on the host machine). |
| ETEXI |
| |
| DEF("watchdog", HAS_ARG, QEMU_OPTION_watchdog, \ |
| "-watchdog i6300esb|ib700\n" \ |
| " enable virtual hardware watchdog [default=none]\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -watchdog @var{model} |
| @findex -watchdog |
| Create a virtual hardware watchdog device. Once enabled (by a guest |
| action), the watchdog must be periodically polled by an agent inside |
| the guest or else the guest will be restarted. |
| |
| The @var{model} is the model of hardware watchdog to emulate. Choices |
| for model are: @code{ib700} (iBASE 700) which is a very simple ISA |
| watchdog with a single timer, or @code{i6300esb} (Intel 6300ESB I/O |
| controller hub) which is a much more featureful PCI-based dual-timer |
| watchdog. Choose a model for which your guest has drivers. |
| |
| Use @code{-watchdog help} to list available hardware models. Only one |
| watchdog can be enabled for a guest. |
| ETEXI |
| |
| DEF("watchdog-action", HAS_ARG, QEMU_OPTION_watchdog_action, \ |
| "-watchdog-action reset|shutdown|poweroff|pause|debug|none\n" \ |
| " action when watchdog fires [default=reset]\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -watchdog-action @var{action} |
| @findex -watchdog-action |
| |
| The @var{action} controls what QEMU will do when the watchdog timer |
| expires. |
| The default is |
| @code{reset} (forcefully reset the guest). |
| Other possible actions are: |
| @code{shutdown} (attempt to gracefully shutdown the guest), |
| @code{poweroff} (forcefully poweroff the guest), |
| @code{pause} (pause the guest), |
| @code{debug} (print a debug message and continue), or |
| @code{none} (do nothing). |
| |
| Note that the @code{shutdown} action requires that the guest responds |
| to ACPI signals, which it may not be able to do in the sort of |
| situations where the watchdog would have expired, and thus |
| @code{-watchdog-action shutdown} is not recommended for production use. |
| |
| Examples: |
| |
| @table @code |
| @item -watchdog i6300esb -watchdog-action pause |
| @item -watchdog ib700 |
| @end table |
| ETEXI |
| |
| DEF("echr", HAS_ARG, QEMU_OPTION_echr, \ |
| "-echr chr set terminal escape character instead of ctrl-a\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| |
| @item -echr @var{numeric_ascii_value} |
| @findex -echr |
| Change the escape character used for switching to the monitor when using |
| monitor and serial sharing. The default is @code{0x01} when using the |
| @code{-nographic} option. @code{0x01} is equal to pressing |
| @code{Control-a}. You can select a different character from the ascii |
| control keys where 1 through 26 map to Control-a through Control-z. For |
| instance you could use the either of the following to change the escape |
| character to Control-t. |
| @table @code |
| @item -echr 0x14 |
| @item -echr 20 |
| @end table |
| ETEXI |
| |
| DEF("virtioconsole", HAS_ARG, QEMU_OPTION_virtiocon, \ |
| "-virtioconsole c\n" \ |
| " set virtio console\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -virtioconsole @var{c} |
| @findex -virtioconsole |
| Set virtio console. |
| |
| This option is maintained for backward compatibility. |
| |
| Please use @code{-device virtconsole} for the new way of invocation. |
| ETEXI |
| |
| DEF("show-cursor", 0, QEMU_OPTION_show_cursor, \ |
| "-show-cursor show cursor\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -show-cursor |
| @findex -show-cursor |
| Show cursor. |
| ETEXI |
| |
| DEF("tb-size", HAS_ARG, QEMU_OPTION_tb_size, \ |
| "-tb-size n set TB size\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -tb-size @var{n} |
| @findex -tb-size |
| Set TB size. |
| ETEXI |
| |
| DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \ |
| "-incoming p prepare for incoming migration, listen on port p\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -incoming @var{port} |
| @findex -incoming |
| Prepare for incoming migration, listen on @var{port}. |
| ETEXI |
| |
| DEF("nodefaults", 0, QEMU_OPTION_nodefaults, \ |
| "-nodefaults don't create default devices\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -nodefaults |
| @findex -nodefaults |
| Don't create default devices. Normally, QEMU sets the default devices like serial |
| port, parallel port, virtual console, monitor device, VGA adapter, floppy and |
| CD-ROM drive and others. The @code{-nodefaults} option will disable all those |
| default devices. |
| ETEXI |
| |
| #ifndef _WIN32 |
| DEF("chroot", HAS_ARG, QEMU_OPTION_chroot, \ |
| "-chroot dir chroot to dir just before starting the VM\n", |
| QEMU_ARCH_ALL) |
| #endif |
| STEXI |
| @item -chroot @var{dir} |
| @findex -chroot |
| Immediately before starting guest execution, chroot to the specified |
| directory. Especially useful in combination with -runas. |
| ETEXI |
| |
| #ifndef _WIN32 |
| DEF("runas", HAS_ARG, QEMU_OPTION_runas, \ |
| "-runas user change to user id user just before starting the VM\n", |
| QEMU_ARCH_ALL) |
| #endif |
| STEXI |
| @item -runas @var{user} |
| @findex -runas |
| Immediately before starting guest execution, drop root privileges, switching |
| to the specified user. |
| ETEXI |
| |
| DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env, |
| "-prom-env variable=value\n" |
| " set OpenBIOS nvram variables\n", |
| QEMU_ARCH_PPC | QEMU_ARCH_SPARC) |
| STEXI |
| @item -prom-env @var{variable}=@var{value} |
| @findex -prom-env |
| Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only). |
| ETEXI |
| DEF("semihosting", 0, QEMU_OPTION_semihosting, |
| "-semihosting semihosting mode\n", |
| QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32) |
| STEXI |
| @item -semihosting |
| @findex -semihosting |
| Semihosting mode (ARM, M68K, Xtensa only). |
| ETEXI |
| DEF("old-param", 0, QEMU_OPTION_old_param, |
| "-old-param old param mode\n", QEMU_ARCH_ARM) |
| STEXI |
| @item -old-param |
| @findex -old-param (ARM) |
| Old param mode (ARM only). |
| ETEXI |
| |
| DEF("sandbox", HAS_ARG, QEMU_OPTION_sandbox, \ |
| "-sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -sandbox @var{arg} |
| @findex -sandbox |
| Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off' will |
| disable it. The default is 'off'. |
| ETEXI |
| |
| DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig, |
| "-readconfig <file>\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -readconfig @var{file} |
| @findex -readconfig |
| Read device configuration from @var{file}. This approach is useful when you want to spawn |
| QEMU process with many command line options but you don't want to exceed the command line |
| character limit. |
| ETEXI |
| DEF("writeconfig", HAS_ARG, QEMU_OPTION_writeconfig, |
| "-writeconfig <file>\n" |
| " read/write config file\n", QEMU_ARCH_ALL) |
| STEXI |
| @item -writeconfig @var{file} |
| @findex -writeconfig |
| Write device configuration to @var{file}. The @var{file} can be either filename to save |
| command line and device configuration into file or dash @code{-}) character to print the |
| output to stdout. This can be later used as input file for @code{-readconfig} option. |
| ETEXI |
| DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig, |
| "-nodefconfig\n" |
| " do not load default config files at startup\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -nodefconfig |
| @findex -nodefconfig |
| Normally QEMU loads configuration files from @var{sysconfdir} and @var{datadir} at startup. |
| The @code{-nodefconfig} option will prevent QEMU from loading any of those config files. |
| ETEXI |
| DEF("no-user-config", 0, QEMU_OPTION_nouserconfig, |
| "-no-user-config\n" |
| " do not load user-provided config files at startup\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -no-user-config |
| @findex -no-user-config |
| The @code{-no-user-config} option makes QEMU not load any of the user-provided |
| config files on @var{sysconfdir}, but won't make it skip the QEMU-provided config |
| files from @var{datadir}. |
| ETEXI |
| DEF("trace", HAS_ARG, QEMU_OPTION_trace, |
| "-trace [events=<file>][,file=<file>]\n" |
| " specify tracing options\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| HXCOMM This line is not accurate, as some sub-options are backend-specific but |
| HXCOMM HX does not support conditional compilation of text. |
| @item -trace [events=@var{file}][,file=@var{file}] |
| @findex -trace |
| |
| Specify tracing options. |
| |
| @table @option |
| @item events=@var{file} |
| Immediately enable events listed in @var{file}. |
| The file must contain one event name (as listed in the @var{trace-events} file) |
| per line. |
| This option is only available if QEMU has been compiled with |
| either @var{simple} or @var{stderr} tracing backend. |
| @item file=@var{file} |
| Log output traces to @var{file}. |
| |
| This option is only available if QEMU has been compiled with |
| the @var{simple} tracing backend. |
| @end table |
| ETEXI |
| |
| HXCOMM Internal use |
| DEF("qtest", HAS_ARG, QEMU_OPTION_qtest, "", QEMU_ARCH_ALL) |
| DEF("qtest-log", HAS_ARG, QEMU_OPTION_qtest_log, "", QEMU_ARCH_ALL) |
| |
| #ifdef __linux__ |
| DEF("enable-fips", 0, QEMU_OPTION_enablefips, |
| "-enable-fips enable FIPS 140-2 compliance\n", |
| QEMU_ARCH_ALL) |
| #endif |
| STEXI |
| @item -enable-fips |
| @findex -enable-fips |
| Enable FIPS 140-2 compliance mode. |
| ETEXI |
| |
| HXCOMM Deprecated by -machine accel=tcg property |
| DEF("no-kvm", 0, QEMU_OPTION_no_kvm, "", QEMU_ARCH_I386) |
| |
| HXCOMM Deprecated by kvm-pit driver properties |
| DEF("no-kvm-pit-reinjection", 0, QEMU_OPTION_no_kvm_pit_reinjection, |
| "", QEMU_ARCH_I386) |
| |
| HXCOMM Deprecated (ignored) |
| DEF("no-kvm-pit", 0, QEMU_OPTION_no_kvm_pit, "", QEMU_ARCH_I386) |
| |
| HXCOMM Deprecated by -machine kernel_irqchip=on|off property |
| DEF("no-kvm-irqchip", 0, QEMU_OPTION_no_kvm_irqchip, "", QEMU_ARCH_I386) |
| |
| HXCOMM Deprecated (ignored) |
| DEF("tdf", 0, QEMU_OPTION_tdf,"", QEMU_ARCH_ALL) |
| |
| DEF("object", HAS_ARG, QEMU_OPTION_object, |
| "-object TYPENAME[,PROP1=VALUE1,...]\n" |
| " create an new object of type TYPENAME setting properties\n" |
| " in the order they are specified. Note that the 'id'\n" |
| " property must be set. These objects are placed in the\n" |
| " '/objects' path.\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -object @var{typename}[,@var{prop1}=@var{value1},...] |
| @findex -object |
| Create an new object of type @var{typename} setting properties |
| in the order they are specified. Note that the 'id' |
| property must be set. These objects are placed in the |
| '/objects' path. |
| ETEXI |
| |
| DEF("msg", HAS_ARG, QEMU_OPTION_msg, |
| "-msg timestamp[=on|off]\n" |
| " change the format of messages\n" |
| " on|off controls leading timestamps (default:on)\n", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -msg timestamp[=on|off] |
| @findex -msg |
| prepend a timestamp to each log message.(default:on) |
| ETEXI |
| |
| DEF("dump-vmstate", HAS_ARG, QEMU_OPTION_dump_vmstate, |
| "-dump-vmstate <file>\n" |
| " Output vmstate information in JSON format to file.\n" |
| " Use the scripts/vmstate-static-checker.py file to\n" |
| " check for possible regressions in migration code\n" |
| " by comparing two such vmstate dumps.", |
| QEMU_ARCH_ALL) |
| STEXI |
| @item -dump-vmstate @var{file} |
| @findex -dump-vmstate |
| Dump json-encoded vmstate information for current machine type to file |
| in @var{file} |
| ETEXI |
| |
| HXCOMM This is the last statement. Insert new options before this line! |
| STEXI |
| @end table |
| ETEXI |