| /* |
| * CFI parallel flash with Intel command set emulation |
| * |
| * Copyright (c) 2006 Thorsten Zitterell |
| * Copyright (c) 2005 Jocelyn Mayer |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| /* |
| * For now, this code can emulate flashes of 1, 2 or 4 bytes width. |
| * Supported commands/modes are: |
| * - flash read |
| * - flash write |
| * - flash ID read |
| * - sector erase |
| * - CFI queries |
| * |
| * It does not support timings |
| * It does not support flash interleaving |
| * It does not implement software data protection as found in many real chips |
| * It does not implement erase suspend/resume commands |
| * It does not implement multiple sectors erase |
| * |
| * It does not implement much more ... |
| */ |
| |
| #include "hw/hw.h" |
| #include "hw/block/flash.h" |
| #include "block/block.h" |
| #include "qemu/timer.h" |
| #include "exec/address-spaces.h" |
| #include "qemu/host-utils.h" |
| #include "hw/sysbus.h" |
| |
| #define PFLASH_BUG(fmt, ...) \ |
| do { \ |
| fprintf(stderr, "PFLASH: Possible BUG - " fmt, ## __VA_ARGS__); \ |
| exit(1); \ |
| } while(0) |
| |
| /* #define PFLASH_DEBUG */ |
| #ifdef PFLASH_DEBUG |
| #define DPRINTF(fmt, ...) \ |
| do { \ |
| fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ |
| } while (0) |
| #else |
| #define DPRINTF(fmt, ...) do { } while (0) |
| #endif |
| |
| struct pflash_t { |
| SysBusDevice busdev; |
| BlockDriverState *bs; |
| uint32_t nb_blocs; |
| uint64_t sector_len; |
| uint8_t width; |
| uint8_t be; |
| uint8_t wcycle; /* if 0, the flash is read normally */ |
| int ro; |
| uint8_t cmd; |
| uint8_t status; |
| uint16_t ident0; |
| uint16_t ident1; |
| uint16_t ident2; |
| uint16_t ident3; |
| uint8_t cfi_len; |
| uint8_t cfi_table[0x52]; |
| uint64_t counter; |
| unsigned int writeblock_size; |
| QEMUTimer *timer; |
| MemoryRegion mem; |
| char *name; |
| void *storage; |
| }; |
| |
| static const VMStateDescription vmstate_pflash = { |
| .name = "pflash_cfi01", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(wcycle, pflash_t), |
| VMSTATE_UINT8(cmd, pflash_t), |
| VMSTATE_UINT8(status, pflash_t), |
| VMSTATE_UINT64(counter, pflash_t), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void pflash_timer (void *opaque) |
| { |
| pflash_t *pfl = opaque; |
| |
| DPRINTF("%s: command %02x done\n", __func__, pfl->cmd); |
| /* Reset flash */ |
| pfl->status ^= 0x80; |
| memory_region_rom_device_set_romd(&pfl->mem, true); |
| pfl->wcycle = 0; |
| pfl->cmd = 0; |
| } |
| |
| static uint32_t pflash_read (pflash_t *pfl, hwaddr offset, |
| int width, int be) |
| { |
| hwaddr boff; |
| uint32_t ret; |
| uint8_t *p; |
| |
| ret = -1; |
| boff = offset & 0xFF; /* why this here ?? */ |
| |
| if (pfl->width == 2) |
| boff = boff >> 1; |
| else if (pfl->width == 4) |
| boff = boff >> 2; |
| |
| #if 0 |
| DPRINTF("%s: reading offset " TARGET_FMT_plx " under cmd %02x width %d\n", |
| __func__, offset, pfl->cmd, width); |
| #endif |
| switch (pfl->cmd) { |
| default: |
| /* This should never happen : reset state & treat it as a read */ |
| DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd); |
| pfl->wcycle = 0; |
| pfl->cmd = 0; |
| /* fall through to read code */ |
| case 0x00: |
| /* Flash area read */ |
| p = pfl->storage; |
| switch (width) { |
| case 1: |
| ret = p[offset]; |
| DPRINTF("%s: data offset " TARGET_FMT_plx " %02x\n", |
| __func__, offset, ret); |
| break; |
| case 2: |
| if (be) { |
| ret = p[offset] << 8; |
| ret |= p[offset + 1]; |
| } else { |
| ret = p[offset]; |
| ret |= p[offset + 1] << 8; |
| } |
| DPRINTF("%s: data offset " TARGET_FMT_plx " %04x\n", |
| __func__, offset, ret); |
| break; |
| case 4: |
| if (be) { |
| ret = p[offset] << 24; |
| ret |= p[offset + 1] << 16; |
| ret |= p[offset + 2] << 8; |
| ret |= p[offset + 3]; |
| } else { |
| ret = p[offset]; |
| ret |= p[offset + 1] << 8; |
| ret |= p[offset + 2] << 16; |
| ret |= p[offset + 3] << 24; |
| } |
| DPRINTF("%s: data offset " TARGET_FMT_plx " %08x\n", |
| __func__, offset, ret); |
| break; |
| default: |
| DPRINTF("BUG in %s\n", __func__); |
| } |
| |
| break; |
| case 0x10: /* Single byte program */ |
| case 0x20: /* Block erase */ |
| case 0x28: /* Block erase */ |
| case 0x40: /* single byte program */ |
| case 0x50: /* Clear status register */ |
| case 0x60: /* Block /un)lock */ |
| case 0x70: /* Status Register */ |
| case 0xe8: /* Write block */ |
| /* Status register read */ |
| ret = pfl->status; |
| DPRINTF("%s: status %x\n", __func__, ret); |
| break; |
| case 0x90: |
| switch (boff) { |
| case 0: |
| ret = pfl->ident0 << 8 | pfl->ident1; |
| DPRINTF("%s: Manufacturer Code %04x\n", __func__, ret); |
| break; |
| case 1: |
| ret = pfl->ident2 << 8 | pfl->ident3; |
| DPRINTF("%s: Device ID Code %04x\n", __func__, ret); |
| break; |
| default: |
| DPRINTF("%s: Read Device Information boff=%x\n", __func__, |
| (unsigned)boff); |
| ret = 0; |
| break; |
| } |
| break; |
| case 0x98: /* Query mode */ |
| if (boff > pfl->cfi_len) |
| ret = 0; |
| else |
| ret = pfl->cfi_table[boff]; |
| break; |
| } |
| return ret; |
| } |
| |
| /* update flash content on disk */ |
| static void pflash_update(pflash_t *pfl, int offset, |
| int size) |
| { |
| int offset_end; |
| if (pfl->bs) { |
| offset_end = offset + size; |
| /* round to sectors */ |
| offset = offset >> 9; |
| offset_end = (offset_end + 511) >> 9; |
| bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9), |
| offset_end - offset); |
| } |
| } |
| |
| static inline void pflash_data_write(pflash_t *pfl, hwaddr offset, |
| uint32_t value, int width, int be) |
| { |
| uint8_t *p = pfl->storage; |
| |
| DPRINTF("%s: block write offset " TARGET_FMT_plx |
| " value %x counter %016" PRIx64 "\n", |
| __func__, offset, value, pfl->counter); |
| switch (width) { |
| case 1: |
| p[offset] = value; |
| break; |
| case 2: |
| if (be) { |
| p[offset] = value >> 8; |
| p[offset + 1] = value; |
| } else { |
| p[offset] = value; |
| p[offset + 1] = value >> 8; |
| } |
| break; |
| case 4: |
| if (be) { |
| p[offset] = value >> 24; |
| p[offset + 1] = value >> 16; |
| p[offset + 2] = value >> 8; |
| p[offset + 3] = value; |
| } else { |
| p[offset] = value; |
| p[offset + 1] = value >> 8; |
| p[offset + 2] = value >> 16; |
| p[offset + 3] = value >> 24; |
| } |
| break; |
| } |
| |
| } |
| |
| static void pflash_write(pflash_t *pfl, hwaddr offset, |
| uint32_t value, int width, int be) |
| { |
| uint8_t *p; |
| uint8_t cmd; |
| |
| cmd = value; |
| |
| DPRINTF("%s: writing offset " TARGET_FMT_plx " value %08x width %d wcycle 0x%x\n", |
| __func__, offset, value, width, pfl->wcycle); |
| |
| if (!pfl->wcycle) { |
| /* Set the device in I/O access mode */ |
| memory_region_rom_device_set_romd(&pfl->mem, false); |
| } |
| |
| switch (pfl->wcycle) { |
| case 0: |
| /* read mode */ |
| switch (cmd) { |
| case 0x00: /* ??? */ |
| goto reset_flash; |
| case 0x10: /* Single Byte Program */ |
| case 0x40: /* Single Byte Program */ |
| DPRINTF("%s: Single Byte Program\n", __func__); |
| break; |
| case 0x20: /* Block erase */ |
| p = pfl->storage; |
| offset &= ~(pfl->sector_len - 1); |
| |
| DPRINTF("%s: block erase at " TARGET_FMT_plx " bytes %x\n", |
| __func__, offset, (unsigned)pfl->sector_len); |
| |
| if (!pfl->ro) { |
| memset(p + offset, 0xff, pfl->sector_len); |
| pflash_update(pfl, offset, pfl->sector_len); |
| } else { |
| pfl->status |= 0x20; /* Block erase error */ |
| } |
| pfl->status |= 0x80; /* Ready! */ |
| break; |
| case 0x50: /* Clear status bits */ |
| DPRINTF("%s: Clear status bits\n", __func__); |
| pfl->status = 0x0; |
| goto reset_flash; |
| case 0x60: /* Block (un)lock */ |
| DPRINTF("%s: Block unlock\n", __func__); |
| break; |
| case 0x70: /* Status Register */ |
| DPRINTF("%s: Read status register\n", __func__); |
| pfl->cmd = cmd; |
| return; |
| case 0x90: /* Read Device ID */ |
| DPRINTF("%s: Read Device information\n", __func__); |
| pfl->cmd = cmd; |
| return; |
| case 0x98: /* CFI query */ |
| DPRINTF("%s: CFI query\n", __func__); |
| break; |
| case 0xe8: /* Write to buffer */ |
| DPRINTF("%s: Write to buffer\n", __func__); |
| pfl->status |= 0x80; /* Ready! */ |
| break; |
| case 0xf0: /* Probe for AMD flash */ |
| DPRINTF("%s: Probe for AMD flash\n", __func__); |
| goto reset_flash; |
| case 0xff: /* Read array mode */ |
| DPRINTF("%s: Read array mode\n", __func__); |
| goto reset_flash; |
| default: |
| goto error_flash; |
| } |
| pfl->wcycle++; |
| pfl->cmd = cmd; |
| break; |
| case 1: |
| switch (pfl->cmd) { |
| case 0x10: /* Single Byte Program */ |
| case 0x40: /* Single Byte Program */ |
| DPRINTF("%s: Single Byte Program\n", __func__); |
| if (!pfl->ro) { |
| pflash_data_write(pfl, offset, value, width, be); |
| pflash_update(pfl, offset, width); |
| } else { |
| pfl->status |= 0x10; /* Programming error */ |
| } |
| pfl->status |= 0x80; /* Ready! */ |
| pfl->wcycle = 0; |
| break; |
| case 0x20: /* Block erase */ |
| case 0x28: |
| if (cmd == 0xd0) { /* confirm */ |
| pfl->wcycle = 0; |
| pfl->status |= 0x80; |
| } else if (cmd == 0xff) { /* read array mode */ |
| goto reset_flash; |
| } else |
| goto error_flash; |
| |
| break; |
| case 0xe8: |
| DPRINTF("%s: block write of %x bytes\n", __func__, value); |
| pfl->counter = value; |
| pfl->wcycle++; |
| break; |
| case 0x60: |
| if (cmd == 0xd0) { |
| pfl->wcycle = 0; |
| pfl->status |= 0x80; |
| } else if (cmd == 0x01) { |
| pfl->wcycle = 0; |
| pfl->status |= 0x80; |
| } else if (cmd == 0xff) { |
| goto reset_flash; |
| } else { |
| DPRINTF("%s: Unknown (un)locking command\n", __func__); |
| goto reset_flash; |
| } |
| break; |
| case 0x98: |
| if (cmd == 0xff) { |
| goto reset_flash; |
| } else { |
| DPRINTF("%s: leaving query mode\n", __func__); |
| } |
| break; |
| default: |
| goto error_flash; |
| } |
| break; |
| case 2: |
| switch (pfl->cmd) { |
| case 0xe8: /* Block write */ |
| if (!pfl->ro) { |
| pflash_data_write(pfl, offset, value, width, be); |
| } else { |
| pfl->status |= 0x10; /* Programming error */ |
| } |
| |
| pfl->status |= 0x80; |
| |
| if (!pfl->counter) { |
| hwaddr mask = pfl->writeblock_size - 1; |
| mask = ~mask; |
| |
| DPRINTF("%s: block write finished\n", __func__); |
| pfl->wcycle++; |
| if (!pfl->ro) { |
| /* Flush the entire write buffer onto backing storage. */ |
| pflash_update(pfl, offset & mask, pfl->writeblock_size); |
| } else { |
| pfl->status |= 0x10; /* Programming error */ |
| } |
| } |
| |
| pfl->counter--; |
| break; |
| default: |
| goto error_flash; |
| } |
| break; |
| case 3: /* Confirm mode */ |
| switch (pfl->cmd) { |
| case 0xe8: /* Block write */ |
| if (cmd == 0xd0) { |
| pfl->wcycle = 0; |
| pfl->status |= 0x80; |
| } else { |
| DPRINTF("%s: unknown command for \"write block\"\n", __func__); |
| PFLASH_BUG("Write block confirm"); |
| goto reset_flash; |
| } |
| break; |
| default: |
| goto error_flash; |
| } |
| break; |
| default: |
| /* Should never happen */ |
| DPRINTF("%s: invalid write state\n", __func__); |
| goto reset_flash; |
| } |
| return; |
| |
| error_flash: |
| qemu_log_mask(LOG_UNIMP, "%s: Unimplemented flash cmd sequence " |
| "(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)" |
| "\n", __func__, offset, pfl->wcycle, pfl->cmd, value); |
| |
| reset_flash: |
| memory_region_rom_device_set_romd(&pfl->mem, true); |
| |
| pfl->wcycle = 0; |
| pfl->cmd = 0; |
| } |
| |
| |
| static uint32_t pflash_readb_be(void *opaque, hwaddr addr) |
| { |
| return pflash_read(opaque, addr, 1, 1); |
| } |
| |
| static uint32_t pflash_readb_le(void *opaque, hwaddr addr) |
| { |
| return pflash_read(opaque, addr, 1, 0); |
| } |
| |
| static uint32_t pflash_readw_be(void *opaque, hwaddr addr) |
| { |
| pflash_t *pfl = opaque; |
| |
| return pflash_read(pfl, addr, 2, 1); |
| } |
| |
| static uint32_t pflash_readw_le(void *opaque, hwaddr addr) |
| { |
| pflash_t *pfl = opaque; |
| |
| return pflash_read(pfl, addr, 2, 0); |
| } |
| |
| static uint32_t pflash_readl_be(void *opaque, hwaddr addr) |
| { |
| pflash_t *pfl = opaque; |
| |
| return pflash_read(pfl, addr, 4, 1); |
| } |
| |
| static uint32_t pflash_readl_le(void *opaque, hwaddr addr) |
| { |
| pflash_t *pfl = opaque; |
| |
| return pflash_read(pfl, addr, 4, 0); |
| } |
| |
| static void pflash_writeb_be(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| pflash_write(opaque, addr, value, 1, 1); |
| } |
| |
| static void pflash_writeb_le(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| pflash_write(opaque, addr, value, 1, 0); |
| } |
| |
| static void pflash_writew_be(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| pflash_t *pfl = opaque; |
| |
| pflash_write(pfl, addr, value, 2, 1); |
| } |
| |
| static void pflash_writew_le(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| pflash_t *pfl = opaque; |
| |
| pflash_write(pfl, addr, value, 2, 0); |
| } |
| |
| static void pflash_writel_be(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| pflash_t *pfl = opaque; |
| |
| pflash_write(pfl, addr, value, 4, 1); |
| } |
| |
| static void pflash_writel_le(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| pflash_t *pfl = opaque; |
| |
| pflash_write(pfl, addr, value, 4, 0); |
| } |
| |
| static const MemoryRegionOps pflash_cfi01_ops_be = { |
| .old_mmio = { |
| .read = { pflash_readb_be, pflash_readw_be, pflash_readl_be, }, |
| .write = { pflash_writeb_be, pflash_writew_be, pflash_writel_be, }, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static const MemoryRegionOps pflash_cfi01_ops_le = { |
| .old_mmio = { |
| .read = { pflash_readb_le, pflash_readw_le, pflash_readl_le, }, |
| .write = { pflash_writeb_le, pflash_writew_le, pflash_writel_le, }, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static int pflash_cfi01_init(SysBusDevice *dev) |
| { |
| pflash_t *pfl = FROM_SYSBUS(typeof(*pfl), dev); |
| uint64_t total_len; |
| int ret; |
| |
| total_len = pfl->sector_len * pfl->nb_blocs; |
| |
| /* XXX: to be fixed */ |
| #if 0 |
| if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) && |
| total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024)) |
| return NULL; |
| #endif |
| |
| memory_region_init_rom_device( |
| &pfl->mem, OBJECT(dev), |
| pfl->be ? &pflash_cfi01_ops_be : &pflash_cfi01_ops_le, pfl, |
| pfl->name, total_len); |
| vmstate_register_ram(&pfl->mem, DEVICE(pfl)); |
| pfl->storage = memory_region_get_ram_ptr(&pfl->mem); |
| sysbus_init_mmio(dev, &pfl->mem); |
| |
| if (pfl->bs) { |
| /* read the initial flash content */ |
| ret = bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9); |
| |
| if (ret < 0) { |
| vmstate_unregister_ram(&pfl->mem, DEVICE(pfl)); |
| memory_region_destroy(&pfl->mem); |
| return 1; |
| } |
| } |
| |
| if (pfl->bs) { |
| pfl->ro = bdrv_is_read_only(pfl->bs); |
| } else { |
| pfl->ro = 0; |
| } |
| |
| pfl->timer = qemu_new_timer_ns(vm_clock, pflash_timer, pfl); |
| pfl->wcycle = 0; |
| pfl->cmd = 0; |
| pfl->status = 0; |
| /* Hardcoded CFI table */ |
| pfl->cfi_len = 0x52; |
| /* Standard "QRY" string */ |
| pfl->cfi_table[0x10] = 'Q'; |
| pfl->cfi_table[0x11] = 'R'; |
| pfl->cfi_table[0x12] = 'Y'; |
| /* Command set (Intel) */ |
| pfl->cfi_table[0x13] = 0x01; |
| pfl->cfi_table[0x14] = 0x00; |
| /* Primary extended table address (none) */ |
| pfl->cfi_table[0x15] = 0x31; |
| pfl->cfi_table[0x16] = 0x00; |
| /* Alternate command set (none) */ |
| pfl->cfi_table[0x17] = 0x00; |
| pfl->cfi_table[0x18] = 0x00; |
| /* Alternate extended table (none) */ |
| pfl->cfi_table[0x19] = 0x00; |
| pfl->cfi_table[0x1A] = 0x00; |
| /* Vcc min */ |
| pfl->cfi_table[0x1B] = 0x45; |
| /* Vcc max */ |
| pfl->cfi_table[0x1C] = 0x55; |
| /* Vpp min (no Vpp pin) */ |
| pfl->cfi_table[0x1D] = 0x00; |
| /* Vpp max (no Vpp pin) */ |
| pfl->cfi_table[0x1E] = 0x00; |
| /* Reserved */ |
| pfl->cfi_table[0x1F] = 0x07; |
| /* Timeout for min size buffer write */ |
| pfl->cfi_table[0x20] = 0x07; |
| /* Typical timeout for block erase */ |
| pfl->cfi_table[0x21] = 0x0a; |
| /* Typical timeout for full chip erase (4096 ms) */ |
| pfl->cfi_table[0x22] = 0x00; |
| /* Reserved */ |
| pfl->cfi_table[0x23] = 0x04; |
| /* Max timeout for buffer write */ |
| pfl->cfi_table[0x24] = 0x04; |
| /* Max timeout for block erase */ |
| pfl->cfi_table[0x25] = 0x04; |
| /* Max timeout for chip erase */ |
| pfl->cfi_table[0x26] = 0x00; |
| /* Device size */ |
| pfl->cfi_table[0x27] = ctz32(total_len); // + 1; |
| /* Flash device interface (8 & 16 bits) */ |
| pfl->cfi_table[0x28] = 0x02; |
| pfl->cfi_table[0x29] = 0x00; |
| /* Max number of bytes in multi-bytes write */ |
| if (pfl->width == 1) { |
| pfl->cfi_table[0x2A] = 0x08; |
| } else { |
| pfl->cfi_table[0x2A] = 0x0B; |
| } |
| pfl->writeblock_size = 1 << pfl->cfi_table[0x2A]; |
| |
| pfl->cfi_table[0x2B] = 0x00; |
| /* Number of erase block regions (uniform) */ |
| pfl->cfi_table[0x2C] = 0x01; |
| /* Erase block region 1 */ |
| pfl->cfi_table[0x2D] = pfl->nb_blocs - 1; |
| pfl->cfi_table[0x2E] = (pfl->nb_blocs - 1) >> 8; |
| pfl->cfi_table[0x2F] = pfl->sector_len >> 8; |
| pfl->cfi_table[0x30] = pfl->sector_len >> 16; |
| |
| /* Extended */ |
| pfl->cfi_table[0x31] = 'P'; |
| pfl->cfi_table[0x32] = 'R'; |
| pfl->cfi_table[0x33] = 'I'; |
| |
| pfl->cfi_table[0x34] = '1'; |
| pfl->cfi_table[0x35] = '0'; |
| |
| pfl->cfi_table[0x36] = 0x00; |
| pfl->cfi_table[0x37] = 0x00; |
| pfl->cfi_table[0x38] = 0x00; |
| pfl->cfi_table[0x39] = 0x00; |
| |
| pfl->cfi_table[0x3a] = 0x00; |
| |
| pfl->cfi_table[0x3b] = 0x00; |
| pfl->cfi_table[0x3c] = 0x00; |
| |
| pfl->cfi_table[0x3f] = 0x01; /* Number of protection fields */ |
| |
| return 0; |
| } |
| |
| static Property pflash_cfi01_properties[] = { |
| DEFINE_PROP_DRIVE("drive", struct pflash_t, bs), |
| DEFINE_PROP_UINT32("num-blocks", struct pflash_t, nb_blocs, 0), |
| DEFINE_PROP_UINT64("sector-length", struct pflash_t, sector_len, 0), |
| DEFINE_PROP_UINT8("width", struct pflash_t, width, 0), |
| DEFINE_PROP_UINT8("big-endian", struct pflash_t, be, 0), |
| DEFINE_PROP_UINT16("id0", struct pflash_t, ident0, 0), |
| DEFINE_PROP_UINT16("id1", struct pflash_t, ident1, 0), |
| DEFINE_PROP_UINT16("id2", struct pflash_t, ident2, 0), |
| DEFINE_PROP_UINT16("id3", struct pflash_t, ident3, 0), |
| DEFINE_PROP_STRING("name", struct pflash_t, name), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void pflash_cfi01_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = pflash_cfi01_init; |
| dc->props = pflash_cfi01_properties; |
| dc->vmsd = &vmstate_pflash; |
| } |
| |
| |
| static const TypeInfo pflash_cfi01_info = { |
| .name = "cfi.pflash01", |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(struct pflash_t), |
| .class_init = pflash_cfi01_class_init, |
| }; |
| |
| static void pflash_cfi01_register_types(void) |
| { |
| type_register_static(&pflash_cfi01_info); |
| } |
| |
| type_init(pflash_cfi01_register_types) |
| |
| pflash_t *pflash_cfi01_register(hwaddr base, |
| DeviceState *qdev, const char *name, |
| hwaddr size, |
| BlockDriverState *bs, |
| uint32_t sector_len, int nb_blocs, int width, |
| uint16_t id0, uint16_t id1, |
| uint16_t id2, uint16_t id3, int be) |
| { |
| DeviceState *dev = qdev_create(NULL, "cfi.pflash01"); |
| SysBusDevice *busdev = SYS_BUS_DEVICE(dev); |
| pflash_t *pfl = (pflash_t *)object_dynamic_cast(OBJECT(dev), |
| "cfi.pflash01"); |
| |
| if (bs && qdev_prop_set_drive(dev, "drive", bs)) { |
| abort(); |
| } |
| qdev_prop_set_uint32(dev, "num-blocks", nb_blocs); |
| qdev_prop_set_uint64(dev, "sector-length", sector_len); |
| qdev_prop_set_uint8(dev, "width", width); |
| qdev_prop_set_uint8(dev, "big-endian", !!be); |
| qdev_prop_set_uint16(dev, "id0", id0); |
| qdev_prop_set_uint16(dev, "id1", id1); |
| qdev_prop_set_uint16(dev, "id2", id2); |
| qdev_prop_set_uint16(dev, "id3", id3); |
| qdev_prop_set_string(dev, "name", name); |
| qdev_init_nofail(dev); |
| |
| sysbus_mmio_map(busdev, 0, base); |
| return pfl; |
| } |
| |
| MemoryRegion *pflash_cfi01_get_memory(pflash_t *fl) |
| { |
| return &fl->mem; |
| } |