| /* |
| * Multiboot Option ROM |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * Copyright Novell Inc, 2009 |
| * Authors: Alexander Graf <agraf@suse.de> |
| */ |
| |
| #include "optionrom.h" |
| |
| #define MULTIBOOT_MAGIC 0x2badb002 |
| |
| #define GS_PROT_JUMP 0 |
| #define GS_GDT_DESC 6 |
| |
| |
| BOOT_ROM_START |
| |
| run_multiboot: |
| |
| cli |
| cld |
| |
| mov %cs, %eax |
| shl $0x4, %eax |
| |
| /* set up a long jump descriptor that is PC relative */ |
| |
| /* move stack memory to %gs */ |
| mov %ss, %ecx |
| shl $0x4, %ecx |
| mov %esp, %ebx |
| add %ebx, %ecx |
| sub $0x20, %ecx |
| sub $0x30, %esp |
| shr $0x4, %ecx |
| mov %cx, %gs |
| |
| /* now push the indirect jump decriptor there */ |
| mov (prot_jump), %ebx |
| add %eax, %ebx |
| movl %ebx, %gs:GS_PROT_JUMP |
| mov $8, %bx |
| movw %bx, %gs:GS_PROT_JUMP + 4 |
| |
| /* fix the gdt descriptor to be PC relative */ |
| movw (gdt_desc), %bx |
| movw %bx, %gs:GS_GDT_DESC |
| movl (gdt_desc+2), %ebx |
| add %eax, %ebx |
| movl %ebx, %gs:GS_GDT_DESC + 2 |
| |
| /* Read the bootinfo struct into RAM */ |
| read_fw_blob(FW_CFG_INITRD) |
| |
| /* FS = bootinfo_struct */ |
| read_fw FW_CFG_INITRD_ADDR |
| shr $4, %eax |
| mov %ax, %fs |
| |
| /* ES = mmap_addr */ |
| mov %eax, %fs:0x48 |
| shr $4, %eax |
| mov %ax, %es |
| |
| /* Initialize multiboot mmap structs using int 0x15(e820) */ |
| xor %ebx, %ebx |
| /* mmap start after first size */ |
| movl $4, %edi |
| |
| mmap_loop: |
| /* entry size (mmap struct) & max buffer size (int15) */ |
| movl $20, %ecx |
| /* store entry size */ |
| /* old as(1) doesn't like this insn so emit the bytes instead: |
| movl %ecx, %es:-4(%edi) |
| */ |
| .dc.b 0x26,0x67,0x66,0x89,0x4f,0xfc |
| /* e820 */ |
| movl $0x0000e820, %eax |
| /* 'SMAP' magic */ |
| movl $0x534d4150, %edx |
| int $0x15 |
| |
| mmap_check_entry: |
| /* last entry? then we're done */ |
| jb mmap_done |
| and %bx, %bx |
| jz mmap_done |
| /* valid entry, so let's loop on */ |
| |
| mmap_store_entry: |
| /* %ax = entry_number * 24 */ |
| mov $24, %ax |
| mul %bx |
| mov %ax, %di |
| movw %di, %fs:0x2c |
| /* %di = 4 + (entry_number * 24) */ |
| add $4, %di |
| jmp mmap_loop |
| |
| mmap_done: |
| real_to_prot: |
| /* Load the GDT before going into protected mode */ |
| lgdt: |
| data32 lgdt %gs:GS_GDT_DESC |
| |
| /* get us to protected mode now */ |
| movl $1, %eax |
| movl %eax, %cr0 |
| |
| /* the LJMP sets CS for us and gets us to 32-bit */ |
| ljmp: |
| data32 ljmp *%gs:GS_PROT_JUMP |
| |
| prot_mode: |
| .code32 |
| |
| /* initialize all other segments */ |
| movl $0x10, %eax |
| movl %eax, %ss |
| movl %eax, %ds |
| movl %eax, %es |
| movl %eax, %fs |
| movl %eax, %gs |
| |
| /* Read the kernel and modules into RAM */ |
| read_fw_blob(FW_CFG_KERNEL) |
| |
| /* Jump off to the kernel */ |
| read_fw FW_CFG_KERNEL_ENTRY |
| mov %eax, %ecx |
| |
| /* EBX contains a pointer to the bootinfo struct */ |
| read_fw FW_CFG_INITRD_ADDR |
| movl %eax, %ebx |
| |
| /* EAX has to contain the magic */ |
| movl $MULTIBOOT_MAGIC, %eax |
| ljmp2: |
| jmp *%ecx |
| |
| /* Variables */ |
| .align 4, 0 |
| prot_jump: .long prot_mode |
| .short 8 |
| |
| .align 4, 0 |
| gdt: |
| /* 0x00 */ |
| .byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
| |
| /* 0x08: code segment (base=0, limit=0xfffff, type=32bit code exec/read, DPL=0, 4k) */ |
| .byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00 |
| |
| /* 0x10: data segment (base=0, limit=0xfffff, type=32bit data read/write, DPL=0, 4k) */ |
| .byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00 |
| |
| /* 0x18: code segment (base=0, limit=0x0ffff, type=16bit code exec/read/conf, DPL=0, 1b) */ |
| .byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00 |
| |
| /* 0x20: data segment (base=0, limit=0x0ffff, type=16bit data read/write, DPL=0, 1b) */ |
| .byte 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0x00, 0x00 |
| |
| gdt_desc: |
| .short (5 * 8) - 1 |
| .long gdt |
| |
| BOOT_ROM_END |