| /* |
| * QEMU JAZZ RC4030 chipset |
| * |
| * Copyright (c) 2007-2009 Herve Poussineau |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "hw.h" |
| #include "mips.h" |
| #include "qemu-timer.h" |
| |
| /********************************************************/ |
| /* debug rc4030 */ |
| |
| //#define DEBUG_RC4030 |
| //#define DEBUG_RC4030_DMA |
| |
| #ifdef DEBUG_RC4030 |
| #define DPRINTF(fmt, ...) \ |
| do { printf("rc4030: " fmt , ## __VA_ARGS__); } while (0) |
| static const char* irq_names[] = { "parallel", "floppy", "sound", "video", |
| "network", "scsi", "keyboard", "mouse", "serial0", "serial1" }; |
| #else |
| #define DPRINTF(fmt, ...) |
| #endif |
| |
| #define RC4030_ERROR(fmt, ...) \ |
| do { fprintf(stderr, "rc4030 ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0) |
| |
| /********************************************************/ |
| /* rc4030 emulation */ |
| |
| typedef struct dma_pagetable_entry { |
| int32_t frame; |
| int32_t owner; |
| } __attribute__((packed)) dma_pagetable_entry; |
| |
| #define DMA_PAGESIZE 4096 |
| #define DMA_REG_ENABLE 1 |
| #define DMA_REG_COUNT 2 |
| #define DMA_REG_ADDRESS 3 |
| |
| #define DMA_FLAG_ENABLE 0x0001 |
| #define DMA_FLAG_MEM_TO_DEV 0x0002 |
| #define DMA_FLAG_TC_INTR 0x0100 |
| #define DMA_FLAG_MEM_INTR 0x0200 |
| #define DMA_FLAG_ADDR_INTR 0x0400 |
| |
| typedef struct rc4030State |
| { |
| uint32_t config; /* 0x0000: RC4030 config register */ |
| uint32_t revision; /* 0x0008: RC4030 Revision register */ |
| uint32_t invalid_address_register; /* 0x0010: Invalid Address register */ |
| |
| /* DMA */ |
| uint32_t dma_regs[8][4]; |
| uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */ |
| uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */ |
| |
| /* cache */ |
| uint32_t cache_maint; /* 0x0030: Cache Maintenance */ |
| uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */ |
| uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */ |
| uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */ |
| uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */ |
| uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */ |
| |
| uint32_t nmi_interrupt; /* 0x0200: interrupt source */ |
| uint32_t offset210; |
| uint32_t nvram_protect; /* 0x0220: NV ram protect register */ |
| uint32_t rem_speed[16]; |
| uint32_t imr_jazz; /* Local bus int enable mask */ |
| uint32_t isr_jazz; /* Local bus int source */ |
| |
| /* timer */ |
| QEMUTimer *periodic_timer; |
| uint32_t itr; /* Interval timer reload */ |
| |
| qemu_irq timer_irq; |
| qemu_irq jazz_bus_irq; |
| } rc4030State; |
| |
| static void set_next_tick(rc4030State *s) |
| { |
| qemu_irq_lower(s->timer_irq); |
| uint32_t tm_hz; |
| |
| tm_hz = 1000 / (s->itr + 1); |
| |
| qemu_mod_timer(s->periodic_timer, qemu_get_clock(vm_clock) + |
| get_ticks_per_sec() / tm_hz); |
| } |
| |
| /* called for accesses to rc4030 */ |
| static uint32_t rc4030_readl(void *opaque, target_phys_addr_t addr) |
| { |
| rc4030State *s = opaque; |
| uint32_t val; |
| |
| addr &= 0x3fff; |
| switch (addr & ~0x3) { |
| /* Global config register */ |
| case 0x0000: |
| val = s->config; |
| break; |
| /* Revision register */ |
| case 0x0008: |
| val = s->revision; |
| break; |
| /* Invalid Address register */ |
| case 0x0010: |
| val = s->invalid_address_register; |
| break; |
| /* DMA transl. table base */ |
| case 0x0018: |
| val = s->dma_tl_base; |
| break; |
| /* DMA transl. table limit */ |
| case 0x0020: |
| val = s->dma_tl_limit; |
| break; |
| /* Remote Failed Address */ |
| case 0x0038: |
| val = s->remote_failed_address; |
| break; |
| /* Memory Failed Address */ |
| case 0x0040: |
| val = s->memory_failed_address; |
| break; |
| /* I/O Cache Byte Mask */ |
| case 0x0058: |
| val = s->cache_bmask; |
| /* HACK */ |
| if (s->cache_bmask == (uint32_t)-1) |
| s->cache_bmask = 0; |
| break; |
| /* Remote Speed Registers */ |
| case 0x0070: |
| case 0x0078: |
| case 0x0080: |
| case 0x0088: |
| case 0x0090: |
| case 0x0098: |
| case 0x00a0: |
| case 0x00a8: |
| case 0x00b0: |
| case 0x00b8: |
| case 0x00c0: |
| case 0x00c8: |
| case 0x00d0: |
| case 0x00d8: |
| case 0x00e0: |
| case 0x00e8: |
| val = s->rem_speed[(addr - 0x0070) >> 3]; |
| break; |
| /* DMA channel base address */ |
| case 0x0100: |
| case 0x0108: |
| case 0x0110: |
| case 0x0118: |
| case 0x0120: |
| case 0x0128: |
| case 0x0130: |
| case 0x0138: |
| case 0x0140: |
| case 0x0148: |
| case 0x0150: |
| case 0x0158: |
| case 0x0160: |
| case 0x0168: |
| case 0x0170: |
| case 0x0178: |
| case 0x0180: |
| case 0x0188: |
| case 0x0190: |
| case 0x0198: |
| case 0x01a0: |
| case 0x01a8: |
| case 0x01b0: |
| case 0x01b8: |
| case 0x01c0: |
| case 0x01c8: |
| case 0x01d0: |
| case 0x01d8: |
| case 0x01e0: |
| case 0x01e8: |
| case 0x01f0: |
| case 0x01f8: |
| { |
| int entry = (addr - 0x0100) >> 5; |
| int idx = (addr & 0x1f) >> 3; |
| val = s->dma_regs[entry][idx]; |
| } |
| break; |
| /* Interrupt source */ |
| case 0x0200: |
| val = s->nmi_interrupt; |
| break; |
| /* Error type */ |
| case 0x0208: |
| val = 0; |
| break; |
| /* Offset 0x0210 */ |
| case 0x0210: |
| val = s->offset210; |
| break; |
| /* NV ram protect register */ |
| case 0x0220: |
| val = s->nvram_protect; |
| break; |
| /* Interval timer count */ |
| case 0x0230: |
| val = 0; |
| qemu_irq_lower(s->timer_irq); |
| break; |
| /* EISA interrupt */ |
| case 0x0238: |
| val = 7; /* FIXME: should be read from EISA controller */ |
| break; |
| default: |
| RC4030_ERROR("invalid read [" TARGET_FMT_plx "]\n", addr); |
| val = 0; |
| break; |
| } |
| |
| if ((addr & ~3) != 0x230) |
| DPRINTF("read 0x%02x at " TARGET_FMT_plx "\n", val, addr); |
| |
| return val; |
| } |
| |
| static uint32_t rc4030_readw(void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t v = rc4030_readl(opaque, addr & ~0x3); |
| if (addr & 0x2) |
| return v >> 16; |
| else |
| return v & 0xffff; |
| } |
| |
| static uint32_t rc4030_readb(void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t v = rc4030_readl(opaque, addr & ~0x3); |
| return (v >> (8 * (addr & 0x3))) & 0xff; |
| } |
| |
| static void rc4030_writel(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| rc4030State *s = opaque; |
| addr &= 0x3fff; |
| |
| DPRINTF("write 0x%02x at " TARGET_FMT_plx "\n", val, addr); |
| |
| switch (addr & ~0x3) { |
| /* Global config register */ |
| case 0x0000: |
| s->config = val; |
| break; |
| /* DMA transl. table base */ |
| case 0x0018: |
| s->dma_tl_base = val; |
| break; |
| /* DMA transl. table limit */ |
| case 0x0020: |
| s->dma_tl_limit = val; |
| break; |
| /* DMA transl. table invalidated */ |
| case 0x0028: |
| break; |
| /* Cache Maintenance */ |
| case 0x0030: |
| s->cache_maint = val; |
| break; |
| /* I/O Cache Physical Tag */ |
| case 0x0048: |
| s->cache_ptag = val; |
| break; |
| /* I/O Cache Logical Tag */ |
| case 0x0050: |
| s->cache_ltag = val; |
| break; |
| /* I/O Cache Byte Mask */ |
| case 0x0058: |
| s->cache_bmask |= val; /* HACK */ |
| break; |
| /* I/O Cache Buffer Window */ |
| case 0x0060: |
| /* HACK */ |
| if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) { |
| target_phys_addr_t dest = s->cache_ptag & ~0x1; |
| dest += (s->cache_maint & 0x3) << 3; |
| cpu_physical_memory_rw(dest, (uint8_t*)&val, 4, 1); |
| } |
| break; |
| /* Remote Speed Registers */ |
| case 0x0070: |
| case 0x0078: |
| case 0x0080: |
| case 0x0088: |
| case 0x0090: |
| case 0x0098: |
| case 0x00a0: |
| case 0x00a8: |
| case 0x00b0: |
| case 0x00b8: |
| case 0x00c0: |
| case 0x00c8: |
| case 0x00d0: |
| case 0x00d8: |
| case 0x00e0: |
| case 0x00e8: |
| s->rem_speed[(addr - 0x0070) >> 3] = val; |
| break; |
| /* DMA channel base address */ |
| case 0x0100: |
| case 0x0108: |
| case 0x0110: |
| case 0x0118: |
| case 0x0120: |
| case 0x0128: |
| case 0x0130: |
| case 0x0138: |
| case 0x0140: |
| case 0x0148: |
| case 0x0150: |
| case 0x0158: |
| case 0x0160: |
| case 0x0168: |
| case 0x0170: |
| case 0x0178: |
| case 0x0180: |
| case 0x0188: |
| case 0x0190: |
| case 0x0198: |
| case 0x01a0: |
| case 0x01a8: |
| case 0x01b0: |
| case 0x01b8: |
| case 0x01c0: |
| case 0x01c8: |
| case 0x01d0: |
| case 0x01d8: |
| case 0x01e0: |
| case 0x01e8: |
| case 0x01f0: |
| case 0x01f8: |
| { |
| int entry = (addr - 0x0100) >> 5; |
| int idx = (addr & 0x1f) >> 3; |
| s->dma_regs[entry][idx] = val; |
| } |
| break; |
| /* Offset 0x0210 */ |
| case 0x0210: |
| s->offset210 = val; |
| break; |
| /* Interval timer reload */ |
| case 0x0228: |
| s->itr = val; |
| qemu_irq_lower(s->timer_irq); |
| set_next_tick(s); |
| break; |
| /* EISA interrupt */ |
| case 0x0238: |
| break; |
| default: |
| RC4030_ERROR("invalid write of 0x%02x at [" TARGET_FMT_plx "]\n", val, addr); |
| break; |
| } |
| } |
| |
| static void rc4030_writew(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| uint32_t old_val = rc4030_readl(opaque, addr & ~0x3); |
| |
| if (addr & 0x2) |
| val = (val << 16) | (old_val & 0x0000ffff); |
| else |
| val = val | (old_val & 0xffff0000); |
| rc4030_writel(opaque, addr & ~0x3, val); |
| } |
| |
| static void rc4030_writeb(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| uint32_t old_val = rc4030_readl(opaque, addr & ~0x3); |
| |
| switch (addr & 3) { |
| case 0: |
| val = val | (old_val & 0xffffff00); |
| break; |
| case 1: |
| val = (val << 8) | (old_val & 0xffff00ff); |
| break; |
| case 2: |
| val = (val << 16) | (old_val & 0xff00ffff); |
| break; |
| case 3: |
| val = (val << 24) | (old_val & 0x00ffffff); |
| break; |
| } |
| rc4030_writel(opaque, addr & ~0x3, val); |
| } |
| |
| static CPUReadMemoryFunc * const rc4030_read[3] = { |
| rc4030_readb, |
| rc4030_readw, |
| rc4030_readl, |
| }; |
| |
| static CPUWriteMemoryFunc * const rc4030_write[3] = { |
| rc4030_writeb, |
| rc4030_writew, |
| rc4030_writel, |
| }; |
| |
| static void update_jazz_irq(rc4030State *s) |
| { |
| uint16_t pending; |
| |
| pending = s->isr_jazz & s->imr_jazz; |
| |
| #ifdef DEBUG_RC4030 |
| if (s->isr_jazz != 0) { |
| uint32_t irq = 0; |
| DPRINTF("pending irqs:"); |
| for (irq = 0; irq < ARRAY_SIZE(irq_names); irq++) { |
| if (s->isr_jazz & (1 << irq)) { |
| printf(" %s", irq_names[irq]); |
| if (!(s->imr_jazz & (1 << irq))) { |
| printf("(ignored)"); |
| } |
| } |
| } |
| printf("\n"); |
| } |
| #endif |
| |
| if (pending != 0) |
| qemu_irq_raise(s->jazz_bus_irq); |
| else |
| qemu_irq_lower(s->jazz_bus_irq); |
| } |
| |
| static void rc4030_irq_jazz_request(void *opaque, int irq, int level) |
| { |
| rc4030State *s = opaque; |
| |
| if (level) { |
| s->isr_jazz |= 1 << irq; |
| } else { |
| s->isr_jazz &= ~(1 << irq); |
| } |
| |
| update_jazz_irq(s); |
| } |
| |
| static void rc4030_periodic_timer(void *opaque) |
| { |
| rc4030State *s = opaque; |
| |
| set_next_tick(s); |
| qemu_irq_raise(s->timer_irq); |
| } |
| |
| static uint32_t jazzio_readw(void *opaque, target_phys_addr_t addr) |
| { |
| rc4030State *s = opaque; |
| uint32_t val; |
| uint32_t irq; |
| addr &= 0xfff; |
| |
| switch (addr) { |
| /* Local bus int source */ |
| case 0x00: { |
| uint32_t pending = s->isr_jazz & s->imr_jazz; |
| val = 0; |
| irq = 0; |
| while (pending) { |
| if (pending & 1) { |
| DPRINTF("returning irq %s\n", irq_names[irq]); |
| val = (irq + 1) << 2; |
| break; |
| } |
| irq++; |
| pending >>= 1; |
| } |
| break; |
| } |
| /* Local bus int enable mask */ |
| case 0x02: |
| val = s->imr_jazz; |
| break; |
| default: |
| RC4030_ERROR("(jazz io controller) invalid read [" TARGET_FMT_plx "]\n", addr); |
| val = 0; |
| } |
| |
| DPRINTF("(jazz io controller) read 0x%04x at " TARGET_FMT_plx "\n", val, addr); |
| |
| return val; |
| } |
| |
| static uint32_t jazzio_readb(void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t v; |
| v = jazzio_readw(opaque, addr & ~0x1); |
| return (v >> (8 * (addr & 0x1))) & 0xff; |
| } |
| |
| static uint32_t jazzio_readl(void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t v; |
| v = jazzio_readw(opaque, addr); |
| v |= jazzio_readw(opaque, addr + 2) << 16; |
| return v; |
| } |
| |
| static void jazzio_writew(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| rc4030State *s = opaque; |
| addr &= 0xfff; |
| |
| DPRINTF("(jazz io controller) write 0x%04x at " TARGET_FMT_plx "\n", val, addr); |
| |
| switch (addr) { |
| /* Local bus int enable mask */ |
| case 0x02: |
| s->imr_jazz = val; |
| update_jazz_irq(s); |
| break; |
| default: |
| RC4030_ERROR("(jazz io controller) invalid write of 0x%04x at [" TARGET_FMT_plx "]\n", val, addr); |
| break; |
| } |
| } |
| |
| static void jazzio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| uint32_t old_val = jazzio_readw(opaque, addr & ~0x1); |
| |
| switch (addr & 1) { |
| case 0: |
| val = val | (old_val & 0xff00); |
| break; |
| case 1: |
| val = (val << 8) | (old_val & 0x00ff); |
| break; |
| } |
| jazzio_writew(opaque, addr & ~0x1, val); |
| } |
| |
| static void jazzio_writel(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| jazzio_writew(opaque, addr, val & 0xffff); |
| jazzio_writew(opaque, addr + 2, (val >> 16) & 0xffff); |
| } |
| |
| static CPUReadMemoryFunc * const jazzio_read[3] = { |
| jazzio_readb, |
| jazzio_readw, |
| jazzio_readl, |
| }; |
| |
| static CPUWriteMemoryFunc * const jazzio_write[3] = { |
| jazzio_writeb, |
| jazzio_writew, |
| jazzio_writel, |
| }; |
| |
| static void rc4030_reset(void *opaque) |
| { |
| rc4030State *s = opaque; |
| int i; |
| |
| s->config = 0x410; /* some boards seem to accept 0x104 too */ |
| s->revision = 1; |
| s->invalid_address_register = 0; |
| |
| memset(s->dma_regs, 0, sizeof(s->dma_regs)); |
| s->dma_tl_base = s->dma_tl_limit = 0; |
| |
| s->remote_failed_address = s->memory_failed_address = 0; |
| s->cache_maint = 0; |
| s->cache_ptag = s->cache_ltag = 0; |
| s->cache_bmask = 0; |
| |
| s->offset210 = 0x18186; |
| s->nvram_protect = 7; |
| for (i = 0; i < 15; i++) |
| s->rem_speed[i] = 7; |
| s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */ |
| s->isr_jazz = 0; |
| |
| s->itr = 0; |
| |
| qemu_irq_lower(s->timer_irq); |
| qemu_irq_lower(s->jazz_bus_irq); |
| } |
| |
| static int rc4030_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| rc4030State* s = opaque; |
| int i, j; |
| |
| if (version_id != 2) |
| return -EINVAL; |
| |
| s->config = qemu_get_be32(f); |
| s->invalid_address_register = qemu_get_be32(f); |
| for (i = 0; i < 8; i++) |
| for (j = 0; j < 4; j++) |
| s->dma_regs[i][j] = qemu_get_be32(f); |
| s->dma_tl_base = qemu_get_be32(f); |
| s->dma_tl_limit = qemu_get_be32(f); |
| s->cache_maint = qemu_get_be32(f); |
| s->remote_failed_address = qemu_get_be32(f); |
| s->memory_failed_address = qemu_get_be32(f); |
| s->cache_ptag = qemu_get_be32(f); |
| s->cache_ltag = qemu_get_be32(f); |
| s->cache_bmask = qemu_get_be32(f); |
| s->offset210 = qemu_get_be32(f); |
| s->nvram_protect = qemu_get_be32(f); |
| for (i = 0; i < 15; i++) |
| s->rem_speed[i] = qemu_get_be32(f); |
| s->imr_jazz = qemu_get_be32(f); |
| s->isr_jazz = qemu_get_be32(f); |
| s->itr = qemu_get_be32(f); |
| |
| set_next_tick(s); |
| update_jazz_irq(s); |
| |
| return 0; |
| } |
| |
| static void rc4030_save(QEMUFile *f, void *opaque) |
| { |
| rc4030State* s = opaque; |
| int i, j; |
| |
| qemu_put_be32(f, s->config); |
| qemu_put_be32(f, s->invalid_address_register); |
| for (i = 0; i < 8; i++) |
| for (j = 0; j < 4; j++) |
| qemu_put_be32(f, s->dma_regs[i][j]); |
| qemu_put_be32(f, s->dma_tl_base); |
| qemu_put_be32(f, s->dma_tl_limit); |
| qemu_put_be32(f, s->cache_maint); |
| qemu_put_be32(f, s->remote_failed_address); |
| qemu_put_be32(f, s->memory_failed_address); |
| qemu_put_be32(f, s->cache_ptag); |
| qemu_put_be32(f, s->cache_ltag); |
| qemu_put_be32(f, s->cache_bmask); |
| qemu_put_be32(f, s->offset210); |
| qemu_put_be32(f, s->nvram_protect); |
| for (i = 0; i < 15; i++) |
| qemu_put_be32(f, s->rem_speed[i]); |
| qemu_put_be32(f, s->imr_jazz); |
| qemu_put_be32(f, s->isr_jazz); |
| qemu_put_be32(f, s->itr); |
| } |
| |
| void rc4030_dma_memory_rw(void *opaque, target_phys_addr_t addr, uint8_t *buf, int len, int is_write) |
| { |
| rc4030State *s = opaque; |
| target_phys_addr_t entry_addr; |
| target_phys_addr_t phys_addr; |
| dma_pagetable_entry entry; |
| int index; |
| int ncpy, i; |
| |
| i = 0; |
| for (;;) { |
| if (i == len) { |
| break; |
| } |
| |
| ncpy = DMA_PAGESIZE - (addr & (DMA_PAGESIZE - 1)); |
| if (ncpy > len - i) |
| ncpy = len - i; |
| |
| /* Get DMA translation table entry */ |
| index = addr / DMA_PAGESIZE; |
| if (index >= s->dma_tl_limit / sizeof(dma_pagetable_entry)) { |
| break; |
| } |
| entry_addr = s->dma_tl_base + index * sizeof(dma_pagetable_entry); |
| /* XXX: not sure. should we really use only lowest bits? */ |
| entry_addr &= 0x7fffffff; |
| cpu_physical_memory_rw(entry_addr, (uint8_t *)&entry, sizeof(entry), 0); |
| |
| /* Read/write data at right place */ |
| phys_addr = entry.frame + (addr & (DMA_PAGESIZE - 1)); |
| cpu_physical_memory_rw(phys_addr, &buf[i], ncpy, is_write); |
| |
| i += ncpy; |
| addr += ncpy; |
| } |
| } |
| |
| static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write) |
| { |
| rc4030State *s = opaque; |
| target_phys_addr_t dma_addr; |
| int dev_to_mem; |
| |
| s->dma_regs[n][DMA_REG_ENABLE] &= ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR); |
| |
| /* Check DMA channel consistency */ |
| dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1; |
| if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) || |
| (is_write != dev_to_mem)) { |
| s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR; |
| s->nmi_interrupt |= 1 << n; |
| return; |
| } |
| |
| /* Get start address and len */ |
| if (len > s->dma_regs[n][DMA_REG_COUNT]) |
| len = s->dma_regs[n][DMA_REG_COUNT]; |
| dma_addr = s->dma_regs[n][DMA_REG_ADDRESS]; |
| |
| /* Read/write data at right place */ |
| rc4030_dma_memory_rw(opaque, dma_addr, buf, len, is_write); |
| |
| s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR; |
| s->dma_regs[n][DMA_REG_COUNT] -= len; |
| |
| #ifdef DEBUG_RC4030_DMA |
| { |
| int i, j; |
| printf("rc4030 dma: Copying %d bytes %s host %p\n", |
| len, is_write ? "from" : "to", buf); |
| for (i = 0; i < len; i += 16) { |
| int n = min(16, len - i); |
| for (j = 0; j < n; j++) |
| printf("%02x ", buf[i + j]); |
| while (j++ < 16) |
| printf(" "); |
| printf("| "); |
| for (j = 0; j < n; j++) |
| printf("%c", isprint(buf[i + j]) ? buf[i + j] : '.'); |
| printf("\n"); |
| } |
| } |
| #endif |
| } |
| |
| struct rc4030DMAState { |
| void *opaque; |
| int n; |
| }; |
| |
| void rc4030_dma_read(void *dma, uint8_t *buf, int len) |
| { |
| rc4030_dma s = dma; |
| rc4030_do_dma(s->opaque, s->n, buf, len, 0); |
| } |
| |
| void rc4030_dma_write(void *dma, uint8_t *buf, int len) |
| { |
| rc4030_dma s = dma; |
| rc4030_do_dma(s->opaque, s->n, buf, len, 1); |
| } |
| |
| static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n) |
| { |
| rc4030_dma *s; |
| struct rc4030DMAState *p; |
| int i; |
| |
| s = (rc4030_dma *)qemu_mallocz(sizeof(rc4030_dma) * n); |
| p = (struct rc4030DMAState *)qemu_mallocz(sizeof(struct rc4030DMAState) * n); |
| for (i = 0; i < n; i++) { |
| p->opaque = opaque; |
| p->n = i; |
| s[i] = p; |
| p++; |
| } |
| return s; |
| } |
| |
| void *rc4030_init(qemu_irq timer, qemu_irq jazz_bus, |
| qemu_irq **irqs, rc4030_dma **dmas) |
| { |
| rc4030State *s; |
| int s_chipset, s_jazzio; |
| |
| s = qemu_mallocz(sizeof(rc4030State)); |
| |
| *irqs = qemu_allocate_irqs(rc4030_irq_jazz_request, s, 16); |
| *dmas = rc4030_allocate_dmas(s, 4); |
| |
| s->periodic_timer = qemu_new_timer(vm_clock, rc4030_periodic_timer, s); |
| s->timer_irq = timer; |
| s->jazz_bus_irq = jazz_bus; |
| |
| qemu_register_reset(rc4030_reset, s); |
| register_savevm("rc4030", 0, 2, rc4030_save, rc4030_load, s); |
| rc4030_reset(s); |
| |
| s_chipset = cpu_register_io_memory(rc4030_read, rc4030_write, s); |
| cpu_register_physical_memory(0x80000000, 0x300, s_chipset); |
| s_jazzio = cpu_register_io_memory(jazzio_read, jazzio_write, s); |
| cpu_register_physical_memory(0xf0000000, 0x00001000, s_jazzio); |
| |
| return s; |
| } |