| /* |
| * TI OMAP DMA gigacell. |
| * |
| * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> |
| * Copyright (C) 2007-2008 Lauro Ramos Venancio <lauro.venancio@indt.org.br> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include "qemu-common.h" |
| #include "qemu-timer.h" |
| #include "omap.h" |
| #include "irq.h" |
| #include "soc_dma.h" |
| |
| struct omap_dma_channel_s { |
| /* transfer data */ |
| int burst[2]; |
| int pack[2]; |
| int endian[2]; |
| int endian_lock[2]; |
| int translate[2]; |
| enum omap_dma_port port[2]; |
| target_phys_addr_t addr[2]; |
| omap_dma_addressing_t mode[2]; |
| uint32_t elements; |
| uint16_t frames; |
| int32_t frame_index[2]; |
| int16_t element_index[2]; |
| int data_type; |
| |
| /* transfer type */ |
| int transparent_copy; |
| int constant_fill; |
| uint32_t color; |
| int prefetch; |
| |
| /* auto init and linked channel data */ |
| int end_prog; |
| int repeat; |
| int auto_init; |
| int link_enabled; |
| int link_next_ch; |
| |
| /* interruption data */ |
| int interrupts; |
| int status; |
| int cstatus; |
| |
| /* state data */ |
| int active; |
| int enable; |
| int sync; |
| int src_sync; |
| int pending_request; |
| int waiting_end_prog; |
| uint16_t cpc; |
| int set_update; |
| |
| /* sync type */ |
| int fs; |
| int bs; |
| |
| /* compatibility */ |
| int omap_3_1_compatible_disable; |
| |
| qemu_irq irq; |
| struct omap_dma_channel_s *sibling; |
| |
| struct omap_dma_reg_set_s { |
| target_phys_addr_t src, dest; |
| int frame; |
| int element; |
| int pck_element; |
| int frame_delta[2]; |
| int elem_delta[2]; |
| int frames; |
| int elements; |
| int pck_elements; |
| } active_set; |
| |
| struct soc_dma_ch_s *dma; |
| |
| /* unused parameters */ |
| int write_mode; |
| int priority; |
| int interleave_disabled; |
| int type; |
| int suspend; |
| int buf_disable; |
| }; |
| |
| struct omap_dma_s { |
| struct soc_dma_s *dma; |
| |
| struct omap_mpu_state_s *mpu; |
| omap_clk clk; |
| qemu_irq irq[4]; |
| void (*intr_update)(struct omap_dma_s *s); |
| enum omap_dma_model model; |
| int omap_3_1_mapping_disabled; |
| |
| uint32_t gcr; |
| uint32_t ocp; |
| uint32_t caps[5]; |
| uint32_t irqen[4]; |
| uint32_t irqstat[4]; |
| |
| int chans; |
| struct omap_dma_channel_s ch[32]; |
| struct omap_dma_lcd_channel_s lcd_ch; |
| }; |
| |
| /* Interrupts */ |
| #define TIMEOUT_INTR (1 << 0) |
| #define EVENT_DROP_INTR (1 << 1) |
| #define HALF_FRAME_INTR (1 << 2) |
| #define END_FRAME_INTR (1 << 3) |
| #define LAST_FRAME_INTR (1 << 4) |
| #define END_BLOCK_INTR (1 << 5) |
| #define SYNC (1 << 6) |
| #define END_PKT_INTR (1 << 7) |
| #define TRANS_ERR_INTR (1 << 8) |
| #define MISALIGN_INTR (1 << 11) |
| |
| static inline void omap_dma_interrupts_update(struct omap_dma_s *s) |
| { |
| return s->intr_update(s); |
| } |
| |
| static void omap_dma_channel_load(struct omap_dma_channel_s *ch) |
| { |
| struct omap_dma_reg_set_s *a = &ch->active_set; |
| int i, normal; |
| int omap_3_1 = !ch->omap_3_1_compatible_disable; |
| |
| /* |
| * TODO: verify address ranges and alignment |
| * TODO: port endianness |
| */ |
| |
| a->src = ch->addr[0]; |
| a->dest = ch->addr[1]; |
| a->frames = ch->frames; |
| a->elements = ch->elements; |
| a->pck_elements = ch->frame_index[!ch->src_sync]; |
| a->frame = 0; |
| a->element = 0; |
| a->pck_element = 0; |
| |
| if (unlikely(!ch->elements || !ch->frames)) { |
| printf("%s: bad DMA request\n", __FUNCTION__); |
| return; |
| } |
| |
| for (i = 0; i < 2; i ++) |
| switch (ch->mode[i]) { |
| case constant: |
| a->elem_delta[i] = 0; |
| a->frame_delta[i] = 0; |
| break; |
| case post_incremented: |
| a->elem_delta[i] = ch->data_type; |
| a->frame_delta[i] = 0; |
| break; |
| case single_index: |
| a->elem_delta[i] = ch->data_type + |
| ch->element_index[omap_3_1 ? 0 : i] - 1; |
| a->frame_delta[i] = 0; |
| break; |
| case double_index: |
| a->elem_delta[i] = ch->data_type + |
| ch->element_index[omap_3_1 ? 0 : i] - 1; |
| a->frame_delta[i] = ch->frame_index[omap_3_1 ? 0 : i] - |
| ch->element_index[omap_3_1 ? 0 : i]; |
| break; |
| default: |
| break; |
| } |
| |
| normal = !ch->transparent_copy && !ch->constant_fill && |
| /* FIFO is big-endian so either (ch->endian[n] == 1) OR |
| * (ch->endian_lock[n] == 1) mean no endianism conversion. */ |
| (ch->endian[0] | ch->endian_lock[0]) == |
| (ch->endian[1] | ch->endian_lock[1]); |
| for (i = 0; i < 2; i ++) { |
| /* TODO: for a->frame_delta[i] > 0 still use the fast path, just |
| * limit min_elems in omap_dma_transfer_setup to the nearest frame |
| * end. */ |
| if (!a->elem_delta[i] && normal && |
| (a->frames == 1 || !a->frame_delta[i])) |
| ch->dma->type[i] = soc_dma_access_const; |
| else if (a->elem_delta[i] == ch->data_type && normal && |
| (a->frames == 1 || !a->frame_delta[i])) |
| ch->dma->type[i] = soc_dma_access_linear; |
| else |
| ch->dma->type[i] = soc_dma_access_other; |
| |
| ch->dma->vaddr[i] = ch->addr[i]; |
| } |
| soc_dma_ch_update(ch->dma); |
| } |
| |
| static void omap_dma_activate_channel(struct omap_dma_s *s, |
| struct omap_dma_channel_s *ch) |
| { |
| if (!ch->active) { |
| if (ch->set_update) { |
| /* It's not clear when the active set is supposed to be |
| * loaded from registers. We're already loading it when the |
| * channel is enabled, and for some guests this is not enough |
| * but that may be also because of a race condition (no |
| * delays in qemu) in the guest code, which we're just |
| * working around here. */ |
| omap_dma_channel_load(ch); |
| ch->set_update = 0; |
| } |
| |
| ch->active = 1; |
| soc_dma_set_request(ch->dma, 1); |
| if (ch->sync) |
| ch->status |= SYNC; |
| } |
| } |
| |
| static void omap_dma_deactivate_channel(struct omap_dma_s *s, |
| struct omap_dma_channel_s *ch) |
| { |
| /* Update cpc */ |
| ch->cpc = ch->active_set.dest & 0xffff; |
| |
| if (ch->pending_request && !ch->waiting_end_prog && ch->enable) { |
| /* Don't deactivate the channel */ |
| ch->pending_request = 0; |
| return; |
| } |
| |
| /* Don't deactive the channel if it is synchronized and the DMA request is |
| active */ |
| if (ch->sync && ch->enable && (s->dma->drqbmp & (1 << ch->sync))) |
| return; |
| |
| if (ch->active) { |
| ch->active = 0; |
| ch->status &= ~SYNC; |
| soc_dma_set_request(ch->dma, 0); |
| } |
| } |
| |
| static void omap_dma_enable_channel(struct omap_dma_s *s, |
| struct omap_dma_channel_s *ch) |
| { |
| if (!ch->enable) { |
| ch->enable = 1; |
| ch->waiting_end_prog = 0; |
| omap_dma_channel_load(ch); |
| /* TODO: theoretically if ch->sync && ch->prefetch && |
| * !s->dma->drqbmp[ch->sync], we should also activate and fetch |
| * from source and then stall until signalled. */ |
| if ((!ch->sync) || (s->dma->drqbmp & (1 << ch->sync))) |
| omap_dma_activate_channel(s, ch); |
| } |
| } |
| |
| static void omap_dma_disable_channel(struct omap_dma_s *s, |
| struct omap_dma_channel_s *ch) |
| { |
| if (ch->enable) { |
| ch->enable = 0; |
| /* Discard any pending request */ |
| ch->pending_request = 0; |
| omap_dma_deactivate_channel(s, ch); |
| } |
| } |
| |
| static void omap_dma_channel_end_prog(struct omap_dma_s *s, |
| struct omap_dma_channel_s *ch) |
| { |
| if (ch->waiting_end_prog) { |
| ch->waiting_end_prog = 0; |
| if (!ch->sync || ch->pending_request) { |
| ch->pending_request = 0; |
| omap_dma_activate_channel(s, ch); |
| } |
| } |
| } |
| |
| static void omap_dma_interrupts_3_1_update(struct omap_dma_s *s) |
| { |
| struct omap_dma_channel_s *ch = s->ch; |
| |
| /* First three interrupts are shared between two channels each. */ |
| if (ch[0].status | ch[6].status) |
| qemu_irq_raise(ch[0].irq); |
| if (ch[1].status | ch[7].status) |
| qemu_irq_raise(ch[1].irq); |
| if (ch[2].status | ch[8].status) |
| qemu_irq_raise(ch[2].irq); |
| if (ch[3].status) |
| qemu_irq_raise(ch[3].irq); |
| if (ch[4].status) |
| qemu_irq_raise(ch[4].irq); |
| if (ch[5].status) |
| qemu_irq_raise(ch[5].irq); |
| } |
| |
| static void omap_dma_interrupts_3_2_update(struct omap_dma_s *s) |
| { |
| struct omap_dma_channel_s *ch = s->ch; |
| int i; |
| |
| for (i = s->chans; i; ch ++, i --) |
| if (ch->status) |
| qemu_irq_raise(ch->irq); |
| } |
| |
| static void omap_dma_enable_3_1_mapping(struct omap_dma_s *s) |
| { |
| s->omap_3_1_mapping_disabled = 0; |
| s->chans = 9; |
| s->intr_update = omap_dma_interrupts_3_1_update; |
| } |
| |
| static void omap_dma_disable_3_1_mapping(struct omap_dma_s *s) |
| { |
| s->omap_3_1_mapping_disabled = 1; |
| s->chans = 16; |
| s->intr_update = omap_dma_interrupts_3_2_update; |
| } |
| |
| static void omap_dma_process_request(struct omap_dma_s *s, int request) |
| { |
| int channel; |
| int drop_event = 0; |
| struct omap_dma_channel_s *ch = s->ch; |
| |
| for (channel = 0; channel < s->chans; channel ++, ch ++) { |
| if (ch->enable && ch->sync == request) { |
| if (!ch->active) |
| omap_dma_activate_channel(s, ch); |
| else if (!ch->pending_request) |
| ch->pending_request = 1; |
| else { |
| /* Request collision */ |
| /* Second request received while processing other request */ |
| ch->status |= EVENT_DROP_INTR; |
| drop_event = 1; |
| } |
| } |
| } |
| |
| if (drop_event) |
| omap_dma_interrupts_update(s); |
| } |
| |
| static void omap_dma_transfer_generic(struct soc_dma_ch_s *dma) |
| { |
| uint8_t value[4]; |
| struct omap_dma_channel_s *ch = dma->opaque; |
| struct omap_dma_reg_set_s *a = &ch->active_set; |
| int bytes = dma->bytes; |
| #ifdef MULTI_REQ |
| uint16_t status = ch->status; |
| #endif |
| |
| do { |
| /* Transfer a single element */ |
| /* FIXME: check the endianness */ |
| if (!ch->constant_fill) |
| cpu_physical_memory_read(a->src, value, ch->data_type); |
| else |
| *(uint32_t *) value = ch->color; |
| |
| if (!ch->transparent_copy || *(uint32_t *) value != ch->color) |
| cpu_physical_memory_write(a->dest, value, ch->data_type); |
| |
| a->src += a->elem_delta[0]; |
| a->dest += a->elem_delta[1]; |
| a->element ++; |
| |
| #ifndef MULTI_REQ |
| if (a->element == a->elements) { |
| /* End of Frame */ |
| a->element = 0; |
| a->src += a->frame_delta[0]; |
| a->dest += a->frame_delta[1]; |
| a->frame ++; |
| |
| /* If the channel is async, update cpc */ |
| if (!ch->sync) |
| ch->cpc = a->dest & 0xffff; |
| } |
| } while ((bytes -= ch->data_type)); |
| #else |
| /* If the channel is element synchronized, deactivate it */ |
| if (ch->sync && !ch->fs && !ch->bs) |
| omap_dma_deactivate_channel(s, ch); |
| |
| /* If it is the last frame, set the LAST_FRAME interrupt */ |
| if (a->element == 1 && a->frame == a->frames - 1) |
| if (ch->interrupts & LAST_FRAME_INTR) |
| ch->status |= LAST_FRAME_INTR; |
| |
| /* If the half of the frame was reached, set the HALF_FRAME |
| interrupt */ |
| if (a->element == (a->elements >> 1)) |
| if (ch->interrupts & HALF_FRAME_INTR) |
| ch->status |= HALF_FRAME_INTR; |
| |
| if (ch->fs && ch->bs) { |
| a->pck_element ++; |
| /* Check if a full packet has beed transferred. */ |
| if (a->pck_element == a->pck_elements) { |
| a->pck_element = 0; |
| |
| /* Set the END_PKT interrupt */ |
| if ((ch->interrupts & END_PKT_INTR) && !ch->src_sync) |
| ch->status |= END_PKT_INTR; |
| |
| /* If the channel is packet-synchronized, deactivate it */ |
| if (ch->sync) |
| omap_dma_deactivate_channel(s, ch); |
| } |
| } |
| |
| if (a->element == a->elements) { |
| /* End of Frame */ |
| a->element = 0; |
| a->src += a->frame_delta[0]; |
| a->dest += a->frame_delta[1]; |
| a->frame ++; |
| |
| /* If the channel is frame synchronized, deactivate it */ |
| if (ch->sync && ch->fs && !ch->bs) |
| omap_dma_deactivate_channel(s, ch); |
| |
| /* If the channel is async, update cpc */ |
| if (!ch->sync) |
| ch->cpc = a->dest & 0xffff; |
| |
| /* Set the END_FRAME interrupt */ |
| if (ch->interrupts & END_FRAME_INTR) |
| ch->status |= END_FRAME_INTR; |
| |
| if (a->frame == a->frames) { |
| /* End of Block */ |
| /* Disable the channel */ |
| |
| if (ch->omap_3_1_compatible_disable) { |
| omap_dma_disable_channel(s, ch); |
| if (ch->link_enabled) |
| omap_dma_enable_channel(s, |
| &s->ch[ch->link_next_ch]); |
| } else { |
| if (!ch->auto_init) |
| omap_dma_disable_channel(s, ch); |
| else if (ch->repeat || ch->end_prog) |
| omap_dma_channel_load(ch); |
| else { |
| ch->waiting_end_prog = 1; |
| omap_dma_deactivate_channel(s, ch); |
| } |
| } |
| |
| if (ch->interrupts & END_BLOCK_INTR) |
| ch->status |= END_BLOCK_INTR; |
| } |
| } |
| } while (status == ch->status && ch->active); |
| |
| omap_dma_interrupts_update(s); |
| #endif |
| } |
| |
| enum { |
| omap_dma_intr_element_sync, |
| omap_dma_intr_last_frame, |
| omap_dma_intr_half_frame, |
| omap_dma_intr_frame, |
| omap_dma_intr_frame_sync, |
| omap_dma_intr_packet, |
| omap_dma_intr_packet_sync, |
| omap_dma_intr_block, |
| __omap_dma_intr_last, |
| }; |
| |
| static void omap_dma_transfer_setup(struct soc_dma_ch_s *dma) |
| { |
| struct omap_dma_port_if_s *src_p, *dest_p; |
| struct omap_dma_reg_set_s *a; |
| struct omap_dma_channel_s *ch = dma->opaque; |
| struct omap_dma_s *s = dma->dma->opaque; |
| int frames, min_elems, elements[__omap_dma_intr_last]; |
| |
| a = &ch->active_set; |
| |
| src_p = &s->mpu->port[ch->port[0]]; |
| dest_p = &s->mpu->port[ch->port[1]]; |
| if ((!ch->constant_fill && !src_p->addr_valid(s->mpu, a->src)) || |
| (!dest_p->addr_valid(s->mpu, a->dest))) { |
| #if 0 |
| /* Bus time-out */ |
| if (ch->interrupts & TIMEOUT_INTR) |
| ch->status |= TIMEOUT_INTR; |
| omap_dma_deactivate_channel(s, ch); |
| continue; |
| #endif |
| printf("%s: Bus time-out in DMA%i operation\n", |
| __FUNCTION__, dma->num); |
| } |
| |
| min_elems = INT_MAX; |
| |
| /* Check all the conditions that terminate the transfer starting |
| * with those that can occur the soonest. */ |
| #define INTR_CHECK(cond, id, nelements) \ |
| if (cond) { \ |
| elements[id] = nelements; \ |
| if (elements[id] < min_elems) \ |
| min_elems = elements[id]; \ |
| } else \ |
| elements[id] = INT_MAX; |
| |
| /* Elements */ |
| INTR_CHECK( |
| ch->sync && !ch->fs && !ch->bs, |
| omap_dma_intr_element_sync, |
| 1) |
| |
| /* Frames */ |
| /* TODO: for transfers where entire frames can be read and written |
| * using memcpy() but a->frame_delta is non-zero, try to still do |
| * transfers using soc_dma but limit min_elems to a->elements - ... |
| * See also the TODO in omap_dma_channel_load. */ |
| INTR_CHECK( |
| (ch->interrupts & LAST_FRAME_INTR) && |
| ((a->frame < a->frames - 1) || !a->element), |
| omap_dma_intr_last_frame, |
| (a->frames - a->frame - 2) * a->elements + |
| (a->elements - a->element + 1)) |
| INTR_CHECK( |
| ch->interrupts & HALF_FRAME_INTR, |
| omap_dma_intr_half_frame, |
| (a->elements >> 1) + |
| (a->element >= (a->elements >> 1) ? a->elements : 0) - |
| a->element) |
| INTR_CHECK( |
| ch->sync && ch->fs && (ch->interrupts & END_FRAME_INTR), |
| omap_dma_intr_frame, |
| a->elements - a->element) |
| INTR_CHECK( |
| ch->sync && ch->fs && !ch->bs, |
| omap_dma_intr_frame_sync, |
| a->elements - a->element) |
| |
| /* Packets */ |
| INTR_CHECK( |
| ch->fs && ch->bs && |
| (ch->interrupts & END_PKT_INTR) && !ch->src_sync, |
| omap_dma_intr_packet, |
| a->pck_elements - a->pck_element) |
| INTR_CHECK( |
| ch->fs && ch->bs && ch->sync, |
| omap_dma_intr_packet_sync, |
| a->pck_elements - a->pck_element) |
| |
| /* Blocks */ |
| INTR_CHECK( |
| 1, |
| omap_dma_intr_block, |
| (a->frames - a->frame - 1) * a->elements + |
| (a->elements - a->element)) |
| |
| dma->bytes = min_elems * ch->data_type; |
| |
| /* Set appropriate interrupts and/or deactivate channels */ |
| |
| #ifdef MULTI_REQ |
| /* TODO: should all of this only be done if dma->update, and otherwise |
| * inside omap_dma_transfer_generic below - check what's faster. */ |
| if (dma->update) { |
| #endif |
| |
| /* If the channel is element synchronized, deactivate it */ |
| if (min_elems == elements[omap_dma_intr_element_sync]) |
| omap_dma_deactivate_channel(s, ch); |
| |
| /* If it is the last frame, set the LAST_FRAME interrupt */ |
| if (min_elems == elements[omap_dma_intr_last_frame]) |
| ch->status |= LAST_FRAME_INTR; |
| |
| /* If exactly half of the frame was reached, set the HALF_FRAME |
| interrupt */ |
| if (min_elems == elements[omap_dma_intr_half_frame]) |
| ch->status |= HALF_FRAME_INTR; |
| |
| /* If a full packet has been transferred, set the END_PKT interrupt */ |
| if (min_elems == elements[omap_dma_intr_packet]) |
| ch->status |= END_PKT_INTR; |
| |
| /* If the channel is packet-synchronized, deactivate it */ |
| if (min_elems == elements[omap_dma_intr_packet_sync]) |
| omap_dma_deactivate_channel(s, ch); |
| |
| /* If the channel is frame synchronized, deactivate it */ |
| if (min_elems == elements[omap_dma_intr_frame_sync]) |
| omap_dma_deactivate_channel(s, ch); |
| |
| /* Set the END_FRAME interrupt */ |
| if (min_elems == elements[omap_dma_intr_frame]) |
| ch->status |= END_FRAME_INTR; |
| |
| if (min_elems == elements[omap_dma_intr_block]) { |
| /* End of Block */ |
| /* Disable the channel */ |
| |
| if (ch->omap_3_1_compatible_disable) { |
| omap_dma_disable_channel(s, ch); |
| if (ch->link_enabled) |
| omap_dma_enable_channel(s, &s->ch[ch->link_next_ch]); |
| } else { |
| if (!ch->auto_init) |
| omap_dma_disable_channel(s, ch); |
| else if (ch->repeat || ch->end_prog) |
| omap_dma_channel_load(ch); |
| else { |
| ch->waiting_end_prog = 1; |
| omap_dma_deactivate_channel(s, ch); |
| } |
| } |
| |
| if (ch->interrupts & END_BLOCK_INTR) |
| ch->status |= END_BLOCK_INTR; |
| } |
| |
| /* Update packet number */ |
| if (ch->fs && ch->bs) { |
| a->pck_element += min_elems; |
| a->pck_element %= a->pck_elements; |
| } |
| |
| /* TODO: check if we really need to update anything here or perhaps we |
| * can skip part of this. */ |
| #ifndef MULTI_REQ |
| if (dma->update) { |
| #endif |
| a->element += min_elems; |
| |
| frames = a->element / a->elements; |
| a->element = a->element % a->elements; |
| a->frame += frames; |
| a->src += min_elems * a->elem_delta[0] + frames * a->frame_delta[0]; |
| a->dest += min_elems * a->elem_delta[1] + frames * a->frame_delta[1]; |
| |
| /* If the channel is async, update cpc */ |
| if (!ch->sync && frames) |
| ch->cpc = a->dest & 0xffff; |
| |
| /* TODO: if the destination port is IMIF or EMIFF, set the dirty |
| * bits on it. */ |
| #ifndef MULTI_REQ |
| } |
| #else |
| } |
| #endif |
| |
| omap_dma_interrupts_update(s); |
| } |
| |
| void omap_dma_reset(struct soc_dma_s *dma) |
| { |
| int i; |
| struct omap_dma_s *s = dma->opaque; |
| |
| soc_dma_reset(s->dma); |
| if (s->model < omap_dma_4) |
| s->gcr = 0x0004; |
| else |
| s->gcr = 0x00010010; |
| s->ocp = 0x00000000; |
| memset(&s->irqstat, 0, sizeof(s->irqstat)); |
| memset(&s->irqen, 0, sizeof(s->irqen)); |
| s->lcd_ch.src = emiff; |
| s->lcd_ch.condition = 0; |
| s->lcd_ch.interrupts = 0; |
| s->lcd_ch.dual = 0; |
| if (s->model < omap_dma_4) |
| omap_dma_enable_3_1_mapping(s); |
| for (i = 0; i < s->chans; i ++) { |
| s->ch[i].suspend = 0; |
| s->ch[i].prefetch = 0; |
| s->ch[i].buf_disable = 0; |
| s->ch[i].src_sync = 0; |
| memset(&s->ch[i].burst, 0, sizeof(s->ch[i].burst)); |
| memset(&s->ch[i].port, 0, sizeof(s->ch[i].port)); |
| memset(&s->ch[i].mode, 0, sizeof(s->ch[i].mode)); |
| memset(&s->ch[i].frame_index, 0, sizeof(s->ch[i].frame_index)); |
| memset(&s->ch[i].element_index, 0, sizeof(s->ch[i].element_index)); |
| memset(&s->ch[i].endian, 0, sizeof(s->ch[i].endian)); |
| memset(&s->ch[i].endian_lock, 0, sizeof(s->ch[i].endian_lock)); |
| memset(&s->ch[i].translate, 0, sizeof(s->ch[i].translate)); |
| s->ch[i].write_mode = 0; |
| s->ch[i].data_type = 0; |
| s->ch[i].transparent_copy = 0; |
| s->ch[i].constant_fill = 0; |
| s->ch[i].color = 0x00000000; |
| s->ch[i].end_prog = 0; |
| s->ch[i].repeat = 0; |
| s->ch[i].auto_init = 0; |
| s->ch[i].link_enabled = 0; |
| if (s->model < omap_dma_4) |
| s->ch[i].interrupts = 0x0003; |
| else |
| s->ch[i].interrupts = 0x0000; |
| s->ch[i].status = 0; |
| s->ch[i].cstatus = 0; |
| s->ch[i].active = 0; |
| s->ch[i].enable = 0; |
| s->ch[i].sync = 0; |
| s->ch[i].pending_request = 0; |
| s->ch[i].waiting_end_prog = 0; |
| s->ch[i].cpc = 0x0000; |
| s->ch[i].fs = 0; |
| s->ch[i].bs = 0; |
| s->ch[i].omap_3_1_compatible_disable = 0; |
| memset(&s->ch[i].active_set, 0, sizeof(s->ch[i].active_set)); |
| s->ch[i].priority = 0; |
| s->ch[i].interleave_disabled = 0; |
| s->ch[i].type = 0; |
| } |
| } |
| |
| static int omap_dma_ch_reg_read(struct omap_dma_s *s, |
| struct omap_dma_channel_s *ch, int reg, uint16_t *value) |
| { |
| switch (reg) { |
| case 0x00: /* SYS_DMA_CSDP_CH0 */ |
| *value = (ch->burst[1] << 14) | |
| (ch->pack[1] << 13) | |
| (ch->port[1] << 9) | |
| (ch->burst[0] << 7) | |
| (ch->pack[0] << 6) | |
| (ch->port[0] << 2) | |
| (ch->data_type >> 1); |
| break; |
| |
| case 0x02: /* SYS_DMA_CCR_CH0 */ |
| if (s->model <= omap_dma_3_1) |
| *value = 0 << 10; /* FIFO_FLUSH reads as 0 */ |
| else |
| *value = ch->omap_3_1_compatible_disable << 10; |
| *value |= (ch->mode[1] << 14) | |
| (ch->mode[0] << 12) | |
| (ch->end_prog << 11) | |
| (ch->repeat << 9) | |
| (ch->auto_init << 8) | |
| (ch->enable << 7) | |
| (ch->priority << 6) | |
| (ch->fs << 5) | ch->sync; |
| break; |
| |
| case 0x04: /* SYS_DMA_CICR_CH0 */ |
| *value = ch->interrupts; |
| break; |
| |
| case 0x06: /* SYS_DMA_CSR_CH0 */ |
| *value = ch->status; |
| ch->status &= SYNC; |
| if (!ch->omap_3_1_compatible_disable && ch->sibling) { |
| *value |= (ch->sibling->status & 0x3f) << 6; |
| ch->sibling->status &= SYNC; |
| } |
| qemu_irq_lower(ch->irq); |
| break; |
| |
| case 0x08: /* SYS_DMA_CSSA_L_CH0 */ |
| *value = ch->addr[0] & 0x0000ffff; |
| break; |
| |
| case 0x0a: /* SYS_DMA_CSSA_U_CH0 */ |
| *value = ch->addr[0] >> 16; |
| break; |
| |
| case 0x0c: /* SYS_DMA_CDSA_L_CH0 */ |
| *value = ch->addr[1] & 0x0000ffff; |
| break; |
| |
| case 0x0e: /* SYS_DMA_CDSA_U_CH0 */ |
| *value = ch->addr[1] >> 16; |
| break; |
| |
| case 0x10: /* SYS_DMA_CEN_CH0 */ |
| *value = ch->elements; |
| break; |
| |
| case 0x12: /* SYS_DMA_CFN_CH0 */ |
| *value = ch->frames; |
| break; |
| |
| case 0x14: /* SYS_DMA_CFI_CH0 */ |
| *value = ch->frame_index[0]; |
| break; |
| |
| case 0x16: /* SYS_DMA_CEI_CH0 */ |
| *value = ch->element_index[0]; |
| break; |
| |
| case 0x18: /* SYS_DMA_CPC_CH0 or DMA_CSAC */ |
| if (ch->omap_3_1_compatible_disable) |
| *value = ch->active_set.src & 0xffff; /* CSAC */ |
| else |
| *value = ch->cpc; |
| break; |
| |
| case 0x1a: /* DMA_CDAC */ |
| *value = ch->active_set.dest & 0xffff; /* CDAC */ |
| break; |
| |
| case 0x1c: /* DMA_CDEI */ |
| *value = ch->element_index[1]; |
| break; |
| |
| case 0x1e: /* DMA_CDFI */ |
| *value = ch->frame_index[1]; |
| break; |
| |
| case 0x20: /* DMA_COLOR_L */ |
| *value = ch->color & 0xffff; |
| break; |
| |
| case 0x22: /* DMA_COLOR_U */ |
| *value = ch->color >> 16; |
| break; |
| |
| case 0x24: /* DMA_CCR2 */ |
| *value = (ch->bs << 2) | |
| (ch->transparent_copy << 1) | |
| ch->constant_fill; |
| break; |
| |
| case 0x28: /* DMA_CLNK_CTRL */ |
| *value = (ch->link_enabled << 15) | |
| (ch->link_next_ch & 0xf); |
| break; |
| |
| case 0x2a: /* DMA_LCH_CTRL */ |
| *value = (ch->interleave_disabled << 15) | |
| ch->type; |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int omap_dma_ch_reg_write(struct omap_dma_s *s, |
| struct omap_dma_channel_s *ch, int reg, uint16_t value) |
| { |
| switch (reg) { |
| case 0x00: /* SYS_DMA_CSDP_CH0 */ |
| ch->burst[1] = (value & 0xc000) >> 14; |
| ch->pack[1] = (value & 0x2000) >> 13; |
| ch->port[1] = (enum omap_dma_port) ((value & 0x1e00) >> 9); |
| ch->burst[0] = (value & 0x0180) >> 7; |
| ch->pack[0] = (value & 0x0040) >> 6; |
| ch->port[0] = (enum omap_dma_port) ((value & 0x003c) >> 2); |
| ch->data_type = 1 << (value & 3); |
| if (ch->port[0] >= __omap_dma_port_last) |
| printf("%s: invalid DMA port %i\n", __FUNCTION__, |
| ch->port[0]); |
| if (ch->port[1] >= __omap_dma_port_last) |
| printf("%s: invalid DMA port %i\n", __FUNCTION__, |
| ch->port[1]); |
| if ((value & 3) == 3) |
| printf("%s: bad data_type for DMA channel\n", __FUNCTION__); |
| break; |
| |
| case 0x02: /* SYS_DMA_CCR_CH0 */ |
| ch->mode[1] = (omap_dma_addressing_t) ((value & 0xc000) >> 14); |
| ch->mode[0] = (omap_dma_addressing_t) ((value & 0x3000) >> 12); |
| ch->end_prog = (value & 0x0800) >> 11; |
| if (s->model >= omap_dma_3_2) |
| ch->omap_3_1_compatible_disable = (value >> 10) & 0x1; |
| ch->repeat = (value & 0x0200) >> 9; |
| ch->auto_init = (value & 0x0100) >> 8; |
| ch->priority = (value & 0x0040) >> 6; |
| ch->fs = (value & 0x0020) >> 5; |
| ch->sync = value & 0x001f; |
| |
| if (value & 0x0080) |
| omap_dma_enable_channel(s, ch); |
| else |
| omap_dma_disable_channel(s, ch); |
| |
| if (ch->end_prog) |
| omap_dma_channel_end_prog(s, ch); |
| |
| break; |
| |
| case 0x04: /* SYS_DMA_CICR_CH0 */ |
| ch->interrupts = value & 0x3f; |
| break; |
| |
| case 0x06: /* SYS_DMA_CSR_CH0 */ |
| OMAP_RO_REG((target_phys_addr_t) reg); |
| break; |
| |
| case 0x08: /* SYS_DMA_CSSA_L_CH0 */ |
| ch->addr[0] &= 0xffff0000; |
| ch->addr[0] |= value; |
| break; |
| |
| case 0x0a: /* SYS_DMA_CSSA_U_CH0 */ |
| ch->addr[0] &= 0x0000ffff; |
| ch->addr[0] |= (uint32_t) value << 16; |
| break; |
| |
| case 0x0c: /* SYS_DMA_CDSA_L_CH0 */ |
| ch->addr[1] &= 0xffff0000; |
| ch->addr[1] |= value; |
| break; |
| |
| case 0x0e: /* SYS_DMA_CDSA_U_CH0 */ |
| ch->addr[1] &= 0x0000ffff; |
| ch->addr[1] |= (uint32_t) value << 16; |
| break; |
| |
| case 0x10: /* SYS_DMA_CEN_CH0 */ |
| ch->elements = value; |
| break; |
| |
| case 0x12: /* SYS_DMA_CFN_CH0 */ |
| ch->frames = value; |
| break; |
| |
| case 0x14: /* SYS_DMA_CFI_CH0 */ |
| ch->frame_index[0] = (int16_t) value; |
| break; |
| |
| case 0x16: /* SYS_DMA_CEI_CH0 */ |
| ch->element_index[0] = (int16_t) value; |
| break; |
| |
| case 0x18: /* SYS_DMA_CPC_CH0 or DMA_CSAC */ |
| OMAP_RO_REG((target_phys_addr_t) reg); |
| break; |
| |
| case 0x1c: /* DMA_CDEI */ |
| ch->element_index[1] = (int16_t) value; |
| break; |
| |
| case 0x1e: /* DMA_CDFI */ |
| ch->frame_index[1] = (int16_t) value; |
| break; |
| |
| case 0x20: /* DMA_COLOR_L */ |
| ch->color &= 0xffff0000; |
| ch->color |= value; |
| break; |
| |
| case 0x22: /* DMA_COLOR_U */ |
| ch->color &= 0xffff; |
| ch->color |= value << 16; |
| break; |
| |
| case 0x24: /* DMA_CCR2 */ |
| ch->bs = (value >> 2) & 0x1; |
| ch->transparent_copy = (value >> 1) & 0x1; |
| ch->constant_fill = value & 0x1; |
| break; |
| |
| case 0x28: /* DMA_CLNK_CTRL */ |
| ch->link_enabled = (value >> 15) & 0x1; |
| if (value & (1 << 14)) { /* Stop_Lnk */ |
| ch->link_enabled = 0; |
| omap_dma_disable_channel(s, ch); |
| } |
| ch->link_next_ch = value & 0x1f; |
| break; |
| |
| case 0x2a: /* DMA_LCH_CTRL */ |
| ch->interleave_disabled = (value >> 15) & 0x1; |
| ch->type = value & 0xf; |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int omap_dma_3_2_lcd_write(struct omap_dma_lcd_channel_s *s, int offset, |
| uint16_t value) |
| { |
| switch (offset) { |
| case 0xbc0: /* DMA_LCD_CSDP */ |
| s->brust_f2 = (value >> 14) & 0x3; |
| s->pack_f2 = (value >> 13) & 0x1; |
| s->data_type_f2 = (1 << ((value >> 11) & 0x3)); |
| s->brust_f1 = (value >> 7) & 0x3; |
| s->pack_f1 = (value >> 6) & 0x1; |
| s->data_type_f1 = (1 << ((value >> 0) & 0x3)); |
| break; |
| |
| case 0xbc2: /* DMA_LCD_CCR */ |
| s->mode_f2 = (value >> 14) & 0x3; |
| s->mode_f1 = (value >> 12) & 0x3; |
| s->end_prog = (value >> 11) & 0x1; |
| s->omap_3_1_compatible_disable = (value >> 10) & 0x1; |
| s->repeat = (value >> 9) & 0x1; |
| s->auto_init = (value >> 8) & 0x1; |
| s->running = (value >> 7) & 0x1; |
| s->priority = (value >> 6) & 0x1; |
| s->bs = (value >> 4) & 0x1; |
| break; |
| |
| case 0xbc4: /* DMA_LCD_CTRL */ |
| s->dst = (value >> 8) & 0x1; |
| s->src = ((value >> 6) & 0x3) << 1; |
| s->condition = 0; |
| /* Assume no bus errors and thus no BUS_ERROR irq bits. */ |
| s->interrupts = (value >> 1) & 1; |
| s->dual = value & 1; |
| break; |
| |
| case 0xbc8: /* TOP_B1_L */ |
| s->src_f1_top &= 0xffff0000; |
| s->src_f1_top |= 0x0000ffff & value; |
| break; |
| |
| case 0xbca: /* TOP_B1_U */ |
| s->src_f1_top &= 0x0000ffff; |
| s->src_f1_top |= value << 16; |
| break; |
| |
| case 0xbcc: /* BOT_B1_L */ |
| s->src_f1_bottom &= 0xffff0000; |
| s->src_f1_bottom |= 0x0000ffff & value; |
| break; |
| |
| case 0xbce: /* BOT_B1_U */ |
| s->src_f1_bottom &= 0x0000ffff; |
| s->src_f1_bottom |= (uint32_t) value << 16; |
| break; |
| |
| case 0xbd0: /* TOP_B2_L */ |
| s->src_f2_top &= 0xffff0000; |
| s->src_f2_top |= 0x0000ffff & value; |
| break; |
| |
| case 0xbd2: /* TOP_B2_U */ |
| s->src_f2_top &= 0x0000ffff; |
| s->src_f2_top |= (uint32_t) value << 16; |
| break; |
| |
| case 0xbd4: /* BOT_B2_L */ |
| s->src_f2_bottom &= 0xffff0000; |
| s->src_f2_bottom |= 0x0000ffff & value; |
| break; |
| |
| case 0xbd6: /* BOT_B2_U */ |
| s->src_f2_bottom &= 0x0000ffff; |
| s->src_f2_bottom |= (uint32_t) value << 16; |
| break; |
| |
| case 0xbd8: /* DMA_LCD_SRC_EI_B1 */ |
| s->element_index_f1 = value; |
| break; |
| |
| case 0xbda: /* DMA_LCD_SRC_FI_B1_L */ |
| s->frame_index_f1 &= 0xffff0000; |
| s->frame_index_f1 |= 0x0000ffff & value; |
| break; |
| |
| case 0xbf4: /* DMA_LCD_SRC_FI_B1_U */ |
| s->frame_index_f1 &= 0x0000ffff; |
| s->frame_index_f1 |= (uint32_t) value << 16; |
| break; |
| |
| case 0xbdc: /* DMA_LCD_SRC_EI_B2 */ |
| s->element_index_f2 = value; |
| break; |
| |
| case 0xbde: /* DMA_LCD_SRC_FI_B2_L */ |
| s->frame_index_f2 &= 0xffff0000; |
| s->frame_index_f2 |= 0x0000ffff & value; |
| break; |
| |
| case 0xbf6: /* DMA_LCD_SRC_FI_B2_U */ |
| s->frame_index_f2 &= 0x0000ffff; |
| s->frame_index_f2 |= (uint32_t) value << 16; |
| break; |
| |
| case 0xbe0: /* DMA_LCD_SRC_EN_B1 */ |
| s->elements_f1 = value; |
| break; |
| |
| case 0xbe4: /* DMA_LCD_SRC_FN_B1 */ |
| s->frames_f1 = value; |
| break; |
| |
| case 0xbe2: /* DMA_LCD_SRC_EN_B2 */ |
| s->elements_f2 = value; |
| break; |
| |
| case 0xbe6: /* DMA_LCD_SRC_FN_B2 */ |
| s->frames_f2 = value; |
| break; |
| |
| case 0xbea: /* DMA_LCD_LCH_CTRL */ |
| s->lch_type = value & 0xf; |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int omap_dma_3_2_lcd_read(struct omap_dma_lcd_channel_s *s, int offset, |
| uint16_t *ret) |
| { |
| switch (offset) { |
| case 0xbc0: /* DMA_LCD_CSDP */ |
| *ret = (s->brust_f2 << 14) | |
| (s->pack_f2 << 13) | |
| ((s->data_type_f2 >> 1) << 11) | |
| (s->brust_f1 << 7) | |
| (s->pack_f1 << 6) | |
| ((s->data_type_f1 >> 1) << 0); |
| break; |
| |
| case 0xbc2: /* DMA_LCD_CCR */ |
| *ret = (s->mode_f2 << 14) | |
| (s->mode_f1 << 12) | |
| (s->end_prog << 11) | |
| (s->omap_3_1_compatible_disable << 10) | |
| (s->repeat << 9) | |
| (s->auto_init << 8) | |
| (s->running << 7) | |
| (s->priority << 6) | |
| (s->bs << 4); |
| break; |
| |
| case 0xbc4: /* DMA_LCD_CTRL */ |
| qemu_irq_lower(s->irq); |
| *ret = (s->dst << 8) | |
| ((s->src & 0x6) << 5) | |
| (s->condition << 3) | |
| (s->interrupts << 1) | |
| s->dual; |
| break; |
| |
| case 0xbc8: /* TOP_B1_L */ |
| *ret = s->src_f1_top & 0xffff; |
| break; |
| |
| case 0xbca: /* TOP_B1_U */ |
| *ret = s->src_f1_top >> 16; |
| break; |
| |
| case 0xbcc: /* BOT_B1_L */ |
| *ret = s->src_f1_bottom & 0xffff; |
| break; |
| |
| case 0xbce: /* BOT_B1_U */ |
| *ret = s->src_f1_bottom >> 16; |
| break; |
| |
| case 0xbd0: /* TOP_B2_L */ |
| *ret = s->src_f2_top & 0xffff; |
| break; |
| |
| case 0xbd2: /* TOP_B2_U */ |
| *ret = s->src_f2_top >> 16; |
| break; |
| |
| case 0xbd4: /* BOT_B2_L */ |
| *ret = s->src_f2_bottom & 0xffff; |
| break; |
| |
| case 0xbd6: /* BOT_B2_U */ |
| *ret = s->src_f2_bottom >> 16; |
| break; |
| |
| case 0xbd8: /* DMA_LCD_SRC_EI_B1 */ |
| *ret = s->element_index_f1; |
| break; |
| |
| case 0xbda: /* DMA_LCD_SRC_FI_B1_L */ |
| *ret = s->frame_index_f1 & 0xffff; |
| break; |
| |
| case 0xbf4: /* DMA_LCD_SRC_FI_B1_U */ |
| *ret = s->frame_index_f1 >> 16; |
| break; |
| |
| case 0xbdc: /* DMA_LCD_SRC_EI_B2 */ |
| *ret = s->element_index_f2; |
| break; |
| |
| case 0xbde: /* DMA_LCD_SRC_FI_B2_L */ |
| *ret = s->frame_index_f2 & 0xffff; |
| break; |
| |
| case 0xbf6: /* DMA_LCD_SRC_FI_B2_U */ |
| *ret = s->frame_index_f2 >> 16; |
| break; |
| |
| case 0xbe0: /* DMA_LCD_SRC_EN_B1 */ |
| *ret = s->elements_f1; |
| break; |
| |
| case 0xbe4: /* DMA_LCD_SRC_FN_B1 */ |
| *ret = s->frames_f1; |
| break; |
| |
| case 0xbe2: /* DMA_LCD_SRC_EN_B2 */ |
| *ret = s->elements_f2; |
| break; |
| |
| case 0xbe6: /* DMA_LCD_SRC_FN_B2 */ |
| *ret = s->frames_f2; |
| break; |
| |
| case 0xbea: /* DMA_LCD_LCH_CTRL */ |
| *ret = s->lch_type; |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int omap_dma_3_1_lcd_write(struct omap_dma_lcd_channel_s *s, int offset, |
| uint16_t value) |
| { |
| switch (offset) { |
| case 0x300: /* SYS_DMA_LCD_CTRL */ |
| s->src = (value & 0x40) ? imif : emiff; |
| s->condition = 0; |
| /* Assume no bus errors and thus no BUS_ERROR irq bits. */ |
| s->interrupts = (value >> 1) & 1; |
| s->dual = value & 1; |
| break; |
| |
| case 0x302: /* SYS_DMA_LCD_TOP_F1_L */ |
| s->src_f1_top &= 0xffff0000; |
| s->src_f1_top |= 0x0000ffff & value; |
| break; |
| |
| case 0x304: /* SYS_DMA_LCD_TOP_F1_U */ |
| s->src_f1_top &= 0x0000ffff; |
| s->src_f1_top |= value << 16; |
| break; |
| |
| case 0x306: /* SYS_DMA_LCD_BOT_F1_L */ |
| s->src_f1_bottom &= 0xffff0000; |
| s->src_f1_bottom |= 0x0000ffff & value; |
| break; |
| |
| case 0x308: /* SYS_DMA_LCD_BOT_F1_U */ |
| s->src_f1_bottom &= 0x0000ffff; |
| s->src_f1_bottom |= value << 16; |
| break; |
| |
| case 0x30a: /* SYS_DMA_LCD_TOP_F2_L */ |
| s->src_f2_top &= 0xffff0000; |
| s->src_f2_top |= 0x0000ffff & value; |
| break; |
| |
| case 0x30c: /* SYS_DMA_LCD_TOP_F2_U */ |
| s->src_f2_top &= 0x0000ffff; |
| s->src_f2_top |= value << 16; |
| break; |
| |
| case 0x30e: /* SYS_DMA_LCD_BOT_F2_L */ |
| s->src_f2_bottom &= 0xffff0000; |
| s->src_f2_bottom |= 0x0000ffff & value; |
| break; |
| |
| case 0x310: /* SYS_DMA_LCD_BOT_F2_U */ |
| s->src_f2_bottom &= 0x0000ffff; |
| s->src_f2_bottom |= value << 16; |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int omap_dma_3_1_lcd_read(struct omap_dma_lcd_channel_s *s, int offset, |
| uint16_t *ret) |
| { |
| int i; |
| |
| switch (offset) { |
| case 0x300: /* SYS_DMA_LCD_CTRL */ |
| i = s->condition; |
| s->condition = 0; |
| qemu_irq_lower(s->irq); |
| *ret = ((s->src == imif) << 6) | (i << 3) | |
| (s->interrupts << 1) | s->dual; |
| break; |
| |
| case 0x302: /* SYS_DMA_LCD_TOP_F1_L */ |
| *ret = s->src_f1_top & 0xffff; |
| break; |
| |
| case 0x304: /* SYS_DMA_LCD_TOP_F1_U */ |
| *ret = s->src_f1_top >> 16; |
| break; |
| |
| case 0x306: /* SYS_DMA_LCD_BOT_F1_L */ |
| *ret = s->src_f1_bottom & 0xffff; |
| break; |
| |
| case 0x308: /* SYS_DMA_LCD_BOT_F1_U */ |
| *ret = s->src_f1_bottom >> 16; |
| break; |
| |
| case 0x30a: /* SYS_DMA_LCD_TOP_F2_L */ |
| *ret = s->src_f2_top & 0xffff; |
| break; |
| |
| case 0x30c: /* SYS_DMA_LCD_TOP_F2_U */ |
| *ret = s->src_f2_top >> 16; |
| break; |
| |
| case 0x30e: /* SYS_DMA_LCD_BOT_F2_L */ |
| *ret = s->src_f2_bottom & 0xffff; |
| break; |
| |
| case 0x310: /* SYS_DMA_LCD_BOT_F2_U */ |
| *ret = s->src_f2_bottom >> 16; |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int omap_dma_sys_write(struct omap_dma_s *s, int offset, uint16_t value) |
| { |
| switch (offset) { |
| case 0x400: /* SYS_DMA_GCR */ |
| s->gcr = value; |
| break; |
| |
| case 0x404: /* DMA_GSCR */ |
| if (value & 0x8) |
| omap_dma_disable_3_1_mapping(s); |
| else |
| omap_dma_enable_3_1_mapping(s); |
| break; |
| |
| case 0x408: /* DMA_GRST */ |
| if (value & 0x1) |
| omap_dma_reset(s->dma); |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int omap_dma_sys_read(struct omap_dma_s *s, int offset, |
| uint16_t *ret) |
| { |
| switch (offset) { |
| case 0x400: /* SYS_DMA_GCR */ |
| *ret = s->gcr; |
| break; |
| |
| case 0x404: /* DMA_GSCR */ |
| *ret = s->omap_3_1_mapping_disabled << 3; |
| break; |
| |
| case 0x408: /* DMA_GRST */ |
| *ret = 0; |
| break; |
| |
| case 0x442: /* DMA_HW_ID */ |
| case 0x444: /* DMA_PCh2_ID */ |
| case 0x446: /* DMA_PCh0_ID */ |
| case 0x448: /* DMA_PCh1_ID */ |
| case 0x44a: /* DMA_PChG_ID */ |
| case 0x44c: /* DMA_PChD_ID */ |
| *ret = 1; |
| break; |
| |
| case 0x44e: /* DMA_CAPS_0_U */ |
| *ret = (s->caps[0] >> 16) & 0xffff; |
| break; |
| case 0x450: /* DMA_CAPS_0_L */ |
| *ret = (s->caps[0] >> 0) & 0xffff; |
| break; |
| |
| case 0x452: /* DMA_CAPS_1_U */ |
| *ret = (s->caps[1] >> 16) & 0xffff; |
| break; |
| case 0x454: /* DMA_CAPS_1_L */ |
| *ret = (s->caps[1] >> 0) & 0xffff; |
| break; |
| |
| case 0x456: /* DMA_CAPS_2 */ |
| *ret = s->caps[2]; |
| break; |
| |
| case 0x458: /* DMA_CAPS_3 */ |
| *ret = s->caps[3]; |
| break; |
| |
| case 0x45a: /* DMA_CAPS_4 */ |
| *ret = s->caps[4]; |
| break; |
| |
| case 0x460: /* DMA_PCh2_SR */ |
| case 0x480: /* DMA_PCh0_SR */ |
| case 0x482: /* DMA_PCh1_SR */ |
| case 0x4c0: /* DMA_PChD_SR_0 */ |
| printf("%s: Physical Channel Status Registers not implemented.\n", |
| __FUNCTION__); |
| *ret = 0xff; |
| break; |
| |
| default: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static uint32_t omap_dma_read(void *opaque, target_phys_addr_t addr) |
| { |
| struct omap_dma_s *s = (struct omap_dma_s *) opaque; |
| int reg, ch; |
| uint16_t ret; |
| |
| switch (addr) { |
| case 0x300 ... 0x3fe: |
| if (s->model <= omap_dma_3_1 || !s->omap_3_1_mapping_disabled) { |
| if (omap_dma_3_1_lcd_read(&s->lcd_ch, addr, &ret)) |
| break; |
| return ret; |
| } |
| /* Fall through. */ |
| case 0x000 ... 0x2fe: |
| reg = addr & 0x3f; |
| ch = (addr >> 6) & 0x0f; |
| if (omap_dma_ch_reg_read(s, &s->ch[ch], reg, &ret)) |
| break; |
| return ret; |
| |
| case 0x404 ... 0x4fe: |
| if (s->model <= omap_dma_3_1) |
| break; |
| /* Fall through. */ |
| case 0x400: |
| if (omap_dma_sys_read(s, addr, &ret)) |
| break; |
| return ret; |
| |
| case 0xb00 ... 0xbfe: |
| if (s->model == omap_dma_3_2 && s->omap_3_1_mapping_disabled) { |
| if (omap_dma_3_2_lcd_read(&s->lcd_ch, addr, &ret)) |
| break; |
| return ret; |
| } |
| break; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_dma_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct omap_dma_s *s = (struct omap_dma_s *) opaque; |
| int reg, ch; |
| |
| switch (addr) { |
| case 0x300 ... 0x3fe: |
| if (s->model <= omap_dma_3_1 || !s->omap_3_1_mapping_disabled) { |
| if (omap_dma_3_1_lcd_write(&s->lcd_ch, addr, value)) |
| break; |
| return; |
| } |
| /* Fall through. */ |
| case 0x000 ... 0x2fe: |
| reg = addr & 0x3f; |
| ch = (addr >> 6) & 0x0f; |
| if (omap_dma_ch_reg_write(s, &s->ch[ch], reg, value)) |
| break; |
| return; |
| |
| case 0x404 ... 0x4fe: |
| if (s->model <= omap_dma_3_1) |
| break; |
| case 0x400: |
| /* Fall through. */ |
| if (omap_dma_sys_write(s, addr, value)) |
| break; |
| return; |
| |
| case 0xb00 ... 0xbfe: |
| if (s->model == omap_dma_3_2 && s->omap_3_1_mapping_disabled) { |
| if (omap_dma_3_2_lcd_write(&s->lcd_ch, addr, value)) |
| break; |
| return; |
| } |
| break; |
| } |
| |
| OMAP_BAD_REG(addr); |
| } |
| |
| static CPUReadMemoryFunc * const omap_dma_readfn[] = { |
| omap_badwidth_read16, |
| omap_dma_read, |
| omap_badwidth_read16, |
| }; |
| |
| static CPUWriteMemoryFunc * const omap_dma_writefn[] = { |
| omap_badwidth_write16, |
| omap_dma_write, |
| omap_badwidth_write16, |
| }; |
| |
| static void omap_dma_request(void *opaque, int drq, int req) |
| { |
| struct omap_dma_s *s = (struct omap_dma_s *) opaque; |
| /* The request pins are level triggered in QEMU. */ |
| if (req) { |
| if (~s->dma->drqbmp & (1 << drq)) { |
| s->dma->drqbmp |= 1 << drq; |
| omap_dma_process_request(s, drq); |
| } |
| } else |
| s->dma->drqbmp &= ~(1 << drq); |
| } |
| |
| /* XXX: this won't be needed once soc_dma knows about clocks. */ |
| static void omap_dma_clk_update(void *opaque, int line, int on) |
| { |
| struct omap_dma_s *s = (struct omap_dma_s *) opaque; |
| int i; |
| |
| s->dma->freq = omap_clk_getrate(s->clk); |
| |
| for (i = 0; i < s->chans; i ++) |
| if (s->ch[i].active) |
| soc_dma_set_request(s->ch[i].dma, on); |
| } |
| |
| static void omap_dma_setcaps(struct omap_dma_s *s) |
| { |
| switch (s->model) { |
| default: |
| case omap_dma_3_1: |
| break; |
| case omap_dma_3_2: |
| case omap_dma_4: |
| /* XXX Only available for sDMA */ |
| s->caps[0] = |
| (1 << 19) | /* Constant Fill Capability */ |
| (1 << 18); /* Transparent BLT Capability */ |
| s->caps[1] = |
| (1 << 1); /* 1-bit palettized capability (DMA 3.2 only) */ |
| s->caps[2] = |
| (1 << 8) | /* SEPARATE_SRC_AND_DST_INDEX_CPBLTY */ |
| (1 << 7) | /* DST_DOUBLE_INDEX_ADRS_CPBLTY */ |
| (1 << 6) | /* DST_SINGLE_INDEX_ADRS_CPBLTY */ |
| (1 << 5) | /* DST_POST_INCRMNT_ADRS_CPBLTY */ |
| (1 << 4) | /* DST_CONST_ADRS_CPBLTY */ |
| (1 << 3) | /* SRC_DOUBLE_INDEX_ADRS_CPBLTY */ |
| (1 << 2) | /* SRC_SINGLE_INDEX_ADRS_CPBLTY */ |
| (1 << 1) | /* SRC_POST_INCRMNT_ADRS_CPBLTY */ |
| (1 << 0); /* SRC_CONST_ADRS_CPBLTY */ |
| s->caps[3] = |
| (1 << 6) | /* BLOCK_SYNCHR_CPBLTY (DMA 4 only) */ |
| (1 << 7) | /* PKT_SYNCHR_CPBLTY (DMA 4 only) */ |
| (1 << 5) | /* CHANNEL_CHAINING_CPBLTY */ |
| (1 << 4) | /* LCh_INTERLEAVE_CPBLTY */ |
| (1 << 3) | /* AUTOINIT_REPEAT_CPBLTY (DMA 3.2 only) */ |
| (1 << 2) | /* AUTOINIT_ENDPROG_CPBLTY (DMA 3.2 only) */ |
| (1 << 1) | /* FRAME_SYNCHR_CPBLTY */ |
| (1 << 0); /* ELMNT_SYNCHR_CPBLTY */ |
| s->caps[4] = |
| (1 << 7) | /* PKT_INTERRUPT_CPBLTY (DMA 4 only) */ |
| (1 << 6) | /* SYNC_STATUS_CPBLTY */ |
| (1 << 5) | /* BLOCK_INTERRUPT_CPBLTY */ |
| (1 << 4) | /* LAST_FRAME_INTERRUPT_CPBLTY */ |
| (1 << 3) | /* FRAME_INTERRUPT_CPBLTY */ |
| (1 << 2) | /* HALF_FRAME_INTERRUPT_CPBLTY */ |
| (1 << 1) | /* EVENT_DROP_INTERRUPT_CPBLTY */ |
| (1 << 0); /* TIMEOUT_INTERRUPT_CPBLTY (DMA 3.2 only) */ |
| break; |
| } |
| } |
| |
| struct soc_dma_s *omap_dma_init(target_phys_addr_t base, qemu_irq *irqs, |
| qemu_irq lcd_irq, struct omap_mpu_state_s *mpu, omap_clk clk, |
| enum omap_dma_model model) |
| { |
| int iomemtype, num_irqs, memsize, i; |
| struct omap_dma_s *s = (struct omap_dma_s *) |
| qemu_mallocz(sizeof(struct omap_dma_s)); |
| |
| if (model <= omap_dma_3_1) { |
| num_irqs = 6; |
| memsize = 0x800; |
| } else { |
| num_irqs = 16; |
| memsize = 0xc00; |
| } |
| s->model = model; |
| s->mpu = mpu; |
| s->clk = clk; |
| s->lcd_ch.irq = lcd_irq; |
| s->lcd_ch.mpu = mpu; |
| |
| s->dma = soc_dma_init((model <= omap_dma_3_1) ? 9 : 16); |
| s->dma->freq = omap_clk_getrate(clk); |
| s->dma->transfer_fn = omap_dma_transfer_generic; |
| s->dma->setup_fn = omap_dma_transfer_setup; |
| s->dma->drq = qemu_allocate_irqs(omap_dma_request, s, 32); |
| s->dma->opaque = s; |
| |
| while (num_irqs --) |
| s->ch[num_irqs].irq = irqs[num_irqs]; |
| for (i = 0; i < 3; i ++) { |
| s->ch[i].sibling = &s->ch[i + 6]; |
| s->ch[i + 6].sibling = &s->ch[i]; |
| } |
| for (i = (model <= omap_dma_3_1) ? 8 : 15; i >= 0; i --) { |
| s->ch[i].dma = &s->dma->ch[i]; |
| s->dma->ch[i].opaque = &s->ch[i]; |
| } |
| |
| omap_dma_setcaps(s); |
| omap_clk_adduser(s->clk, qemu_allocate_irqs(omap_dma_clk_update, s, 1)[0]); |
| omap_dma_reset(s->dma); |
| omap_dma_clk_update(s, 0, 1); |
| |
| iomemtype = cpu_register_io_memory(omap_dma_readfn, |
| omap_dma_writefn, s); |
| cpu_register_physical_memory(base, memsize, iomemtype); |
| |
| mpu->drq = s->dma->drq; |
| |
| return s->dma; |
| } |
| |
| static void omap_dma_interrupts_4_update(struct omap_dma_s *s) |
| { |
| struct omap_dma_channel_s *ch = s->ch; |
| uint32_t bmp, bit; |
| |
| for (bmp = 0, bit = 1; bit; ch ++, bit <<= 1) |
| if (ch->status) { |
| bmp |= bit; |
| ch->cstatus |= ch->status; |
| ch->status = 0; |
| } |
| if ((s->irqstat[0] |= s->irqen[0] & bmp)) |
| qemu_irq_raise(s->irq[0]); |
| if ((s->irqstat[1] |= s->irqen[1] & bmp)) |
| qemu_irq_raise(s->irq[1]); |
| if ((s->irqstat[2] |= s->irqen[2] & bmp)) |
| qemu_irq_raise(s->irq[2]); |
| if ((s->irqstat[3] |= s->irqen[3] & bmp)) |
| qemu_irq_raise(s->irq[3]); |
| } |
| |
| static uint32_t omap_dma4_read(void *opaque, target_phys_addr_t addr) |
| { |
| struct omap_dma_s *s = (struct omap_dma_s *) opaque; |
| int irqn = 0, chnum; |
| struct omap_dma_channel_s *ch; |
| |
| switch (addr) { |
| case 0x00: /* DMA4_REVISION */ |
| return 0x40; |
| |
| case 0x14: /* DMA4_IRQSTATUS_L3 */ |
| irqn ++; |
| case 0x10: /* DMA4_IRQSTATUS_L2 */ |
| irqn ++; |
| case 0x0c: /* DMA4_IRQSTATUS_L1 */ |
| irqn ++; |
| case 0x08: /* DMA4_IRQSTATUS_L0 */ |
| return s->irqstat[irqn]; |
| |
| case 0x24: /* DMA4_IRQENABLE_L3 */ |
| irqn ++; |
| case 0x20: /* DMA4_IRQENABLE_L2 */ |
| irqn ++; |
| case 0x1c: /* DMA4_IRQENABLE_L1 */ |
| irqn ++; |
| case 0x18: /* DMA4_IRQENABLE_L0 */ |
| return s->irqen[irqn]; |
| |
| case 0x28: /* DMA4_SYSSTATUS */ |
| return 1; /* RESETDONE */ |
| |
| case 0x2c: /* DMA4_OCP_SYSCONFIG */ |
| return s->ocp; |
| |
| case 0x64: /* DMA4_CAPS_0 */ |
| return s->caps[0]; |
| case 0x6c: /* DMA4_CAPS_2 */ |
| return s->caps[2]; |
| case 0x70: /* DMA4_CAPS_3 */ |
| return s->caps[3]; |
| case 0x74: /* DMA4_CAPS_4 */ |
| return s->caps[4]; |
| |
| case 0x78: /* DMA4_GCR */ |
| return s->gcr; |
| |
| case 0x80 ... 0xfff: |
| addr -= 0x80; |
| chnum = addr / 0x60; |
| ch = s->ch + chnum; |
| addr -= chnum * 0x60; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| /* Per-channel registers */ |
| switch (addr) { |
| case 0x00: /* DMA4_CCR */ |
| return (ch->buf_disable << 25) | |
| (ch->src_sync << 24) | |
| (ch->prefetch << 23) | |
| ((ch->sync & 0x60) << 14) | |
| (ch->bs << 18) | |
| (ch->transparent_copy << 17) | |
| (ch->constant_fill << 16) | |
| (ch->mode[1] << 14) | |
| (ch->mode[0] << 12) | |
| (0 << 10) | (0 << 9) | |
| (ch->suspend << 8) | |
| (ch->enable << 7) | |
| (ch->priority << 6) | |
| (ch->fs << 5) | (ch->sync & 0x1f); |
| |
| case 0x04: /* DMA4_CLNK_CTRL */ |
| return (ch->link_enabled << 15) | ch->link_next_ch; |
| |
| case 0x08: /* DMA4_CICR */ |
| return ch->interrupts; |
| |
| case 0x0c: /* DMA4_CSR */ |
| return ch->cstatus; |
| |
| case 0x10: /* DMA4_CSDP */ |
| return (ch->endian[0] << 21) | |
| (ch->endian_lock[0] << 20) | |
| (ch->endian[1] << 19) | |
| (ch->endian_lock[1] << 18) | |
| (ch->write_mode << 16) | |
| (ch->burst[1] << 14) | |
| (ch->pack[1] << 13) | |
| (ch->translate[1] << 9) | |
| (ch->burst[0] << 7) | |
| (ch->pack[0] << 6) | |
| (ch->translate[0] << 2) | |
| (ch->data_type >> 1); |
| |
| case 0x14: /* DMA4_CEN */ |
| return ch->elements; |
| |
| case 0x18: /* DMA4_CFN */ |
| return ch->frames; |
| |
| case 0x1c: /* DMA4_CSSA */ |
| return ch->addr[0]; |
| |
| case 0x20: /* DMA4_CDSA */ |
| return ch->addr[1]; |
| |
| case 0x24: /* DMA4_CSEI */ |
| return ch->element_index[0]; |
| |
| case 0x28: /* DMA4_CSFI */ |
| return ch->frame_index[0]; |
| |
| case 0x2c: /* DMA4_CDEI */ |
| return ch->element_index[1]; |
| |
| case 0x30: /* DMA4_CDFI */ |
| return ch->frame_index[1]; |
| |
| case 0x34: /* DMA4_CSAC */ |
| return ch->active_set.src & 0xffff; |
| |
| case 0x38: /* DMA4_CDAC */ |
| return ch->active_set.dest & 0xffff; |
| |
| case 0x3c: /* DMA4_CCEN */ |
| return ch->active_set.element; |
| |
| case 0x40: /* DMA4_CCFN */ |
| return ch->active_set.frame; |
| |
| case 0x44: /* DMA4_COLOR */ |
| /* XXX only in sDMA */ |
| return ch->color; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| } |
| |
| static void omap_dma4_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct omap_dma_s *s = (struct omap_dma_s *) opaque; |
| int chnum, irqn = 0; |
| struct omap_dma_channel_s *ch; |
| |
| switch (addr) { |
| case 0x14: /* DMA4_IRQSTATUS_L3 */ |
| irqn ++; |
| case 0x10: /* DMA4_IRQSTATUS_L2 */ |
| irqn ++; |
| case 0x0c: /* DMA4_IRQSTATUS_L1 */ |
| irqn ++; |
| case 0x08: /* DMA4_IRQSTATUS_L0 */ |
| s->irqstat[irqn] &= ~value; |
| if (!s->irqstat[irqn]) |
| qemu_irq_lower(s->irq[irqn]); |
| return; |
| |
| case 0x24: /* DMA4_IRQENABLE_L3 */ |
| irqn ++; |
| case 0x20: /* DMA4_IRQENABLE_L2 */ |
| irqn ++; |
| case 0x1c: /* DMA4_IRQENABLE_L1 */ |
| irqn ++; |
| case 0x18: /* DMA4_IRQENABLE_L0 */ |
| s->irqen[irqn] = value; |
| return; |
| |
| case 0x2c: /* DMA4_OCP_SYSCONFIG */ |
| if (value & 2) /* SOFTRESET */ |
| omap_dma_reset(s->dma); |
| s->ocp = value & 0x3321; |
| if (((s->ocp >> 12) & 3) == 3) /* MIDLEMODE */ |
| fprintf(stderr, "%s: invalid DMA power mode\n", __FUNCTION__); |
| return; |
| |
| case 0x78: /* DMA4_GCR */ |
| s->gcr = value & 0x00ff00ff; |
| if ((value & 0xff) == 0x00) /* MAX_CHANNEL_FIFO_DEPTH */ |
| fprintf(stderr, "%s: wrong FIFO depth in GCR\n", __FUNCTION__); |
| return; |
| |
| case 0x80 ... 0xfff: |
| addr -= 0x80; |
| chnum = addr / 0x60; |
| ch = s->ch + chnum; |
| addr -= chnum * 0x60; |
| break; |
| |
| case 0x00: /* DMA4_REVISION */ |
| case 0x28: /* DMA4_SYSSTATUS */ |
| case 0x64: /* DMA4_CAPS_0 */ |
| case 0x6c: /* DMA4_CAPS_2 */ |
| case 0x70: /* DMA4_CAPS_3 */ |
| case 0x74: /* DMA4_CAPS_4 */ |
| OMAP_RO_REG(addr); |
| return; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| |
| /* Per-channel registers */ |
| switch (addr) { |
| case 0x00: /* DMA4_CCR */ |
| ch->buf_disable = (value >> 25) & 1; |
| ch->src_sync = (value >> 24) & 1; /* XXX For CamDMA must be 1 */ |
| if (ch->buf_disable && !ch->src_sync) |
| fprintf(stderr, "%s: Buffering disable is not allowed in " |
| "destination synchronised mode\n", __FUNCTION__); |
| ch->prefetch = (value >> 23) & 1; |
| ch->bs = (value >> 18) & 1; |
| ch->transparent_copy = (value >> 17) & 1; |
| ch->constant_fill = (value >> 16) & 1; |
| ch->mode[1] = (omap_dma_addressing_t) ((value & 0xc000) >> 14); |
| ch->mode[0] = (omap_dma_addressing_t) ((value & 0x3000) >> 12); |
| ch->suspend = (value & 0x0100) >> 8; |
| ch->priority = (value & 0x0040) >> 6; |
| ch->fs = (value & 0x0020) >> 5; |
| if (ch->fs && ch->bs && ch->mode[0] && ch->mode[1]) |
| fprintf(stderr, "%s: For a packet transfer at least one port " |
| "must be constant-addressed\n", __FUNCTION__); |
| ch->sync = (value & 0x001f) | ((value >> 14) & 0x0060); |
| /* XXX must be 0x01 for CamDMA */ |
| |
| if (value & 0x0080) |
| omap_dma_enable_channel(s, ch); |
| else |
| omap_dma_disable_channel(s, ch); |
| |
| break; |
| |
| case 0x04: /* DMA4_CLNK_CTRL */ |
| ch->link_enabled = (value >> 15) & 0x1; |
| ch->link_next_ch = value & 0x1f; |
| break; |
| |
| case 0x08: /* DMA4_CICR */ |
| ch->interrupts = value & 0x09be; |
| break; |
| |
| case 0x0c: /* DMA4_CSR */ |
| ch->cstatus &= ~value; |
| break; |
| |
| case 0x10: /* DMA4_CSDP */ |
| ch->endian[0] =(value >> 21) & 1; |
| ch->endian_lock[0] =(value >> 20) & 1; |
| ch->endian[1] =(value >> 19) & 1; |
| ch->endian_lock[1] =(value >> 18) & 1; |
| if (ch->endian[0] != ch->endian[1]) |
| fprintf(stderr, "%s: DMA endiannes conversion enable attempt\n", |
| __FUNCTION__); |
| ch->write_mode = (value >> 16) & 3; |
| ch->burst[1] = (value & 0xc000) >> 14; |
| ch->pack[1] = (value & 0x2000) >> 13; |
| ch->translate[1] = (value & 0x1e00) >> 9; |
| ch->burst[0] = (value & 0x0180) >> 7; |
| ch->pack[0] = (value & 0x0040) >> 6; |
| ch->translate[0] = (value & 0x003c) >> 2; |
| if (ch->translate[0] | ch->translate[1]) |
| fprintf(stderr, "%s: bad MReqAddressTranslate sideband signal\n", |
| __FUNCTION__); |
| ch->data_type = 1 << (value & 3); |
| if ((value & 3) == 3) |
| printf("%s: bad data_type for DMA channel\n", __FUNCTION__); |
| break; |
| |
| case 0x14: /* DMA4_CEN */ |
| ch->set_update = 1; |
| ch->elements = value & 0xffffff; |
| break; |
| |
| case 0x18: /* DMA4_CFN */ |
| ch->frames = value & 0xffff; |
| ch->set_update = 1; |
| break; |
| |
| case 0x1c: /* DMA4_CSSA */ |
| ch->addr[0] = (target_phys_addr_t) (uint32_t) value; |
| ch->set_update = 1; |
| break; |
| |
| case 0x20: /* DMA4_CDSA */ |
| ch->addr[1] = (target_phys_addr_t) (uint32_t) value; |
| ch->set_update = 1; |
| break; |
| |
| case 0x24: /* DMA4_CSEI */ |
| ch->element_index[0] = (int16_t) value; |
| ch->set_update = 1; |
| break; |
| |
| case 0x28: /* DMA4_CSFI */ |
| ch->frame_index[0] = (int32_t) value; |
| ch->set_update = 1; |
| break; |
| |
| case 0x2c: /* DMA4_CDEI */ |
| ch->element_index[1] = (int16_t) value; |
| ch->set_update = 1; |
| break; |
| |
| case 0x30: /* DMA4_CDFI */ |
| ch->frame_index[1] = (int32_t) value; |
| ch->set_update = 1; |
| break; |
| |
| case 0x44: /* DMA4_COLOR */ |
| /* XXX only in sDMA */ |
| ch->color = value; |
| break; |
| |
| case 0x34: /* DMA4_CSAC */ |
| case 0x38: /* DMA4_CDAC */ |
| case 0x3c: /* DMA4_CCEN */ |
| case 0x40: /* DMA4_CCFN */ |
| OMAP_RO_REG(addr); |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static CPUReadMemoryFunc * const omap_dma4_readfn[] = { |
| omap_badwidth_read16, |
| omap_dma4_read, |
| omap_dma4_read, |
| }; |
| |
| static CPUWriteMemoryFunc * const omap_dma4_writefn[] = { |
| omap_badwidth_write16, |
| omap_dma4_write, |
| omap_dma4_write, |
| }; |
| |
| struct soc_dma_s *omap_dma4_init(target_phys_addr_t base, qemu_irq *irqs, |
| struct omap_mpu_state_s *mpu, int fifo, |
| int chans, omap_clk iclk, omap_clk fclk) |
| { |
| int iomemtype, i; |
| struct omap_dma_s *s = (struct omap_dma_s *) |
| qemu_mallocz(sizeof(struct omap_dma_s)); |
| |
| s->model = omap_dma_4; |
| s->chans = chans; |
| s->mpu = mpu; |
| s->clk = fclk; |
| |
| s->dma = soc_dma_init(s->chans); |
| s->dma->freq = omap_clk_getrate(fclk); |
| s->dma->transfer_fn = omap_dma_transfer_generic; |
| s->dma->setup_fn = omap_dma_transfer_setup; |
| s->dma->drq = qemu_allocate_irqs(omap_dma_request, s, 64); |
| s->dma->opaque = s; |
| for (i = 0; i < s->chans; i ++) { |
| s->ch[i].dma = &s->dma->ch[i]; |
| s->dma->ch[i].opaque = &s->ch[i]; |
| } |
| |
| memcpy(&s->irq, irqs, sizeof(s->irq)); |
| s->intr_update = omap_dma_interrupts_4_update; |
| |
| omap_dma_setcaps(s); |
| omap_clk_adduser(s->clk, qemu_allocate_irqs(omap_dma_clk_update, s, 1)[0]); |
| omap_dma_reset(s->dma); |
| omap_dma_clk_update(s, 0, !!s->dma->freq); |
| |
| iomemtype = cpu_register_io_memory(omap_dma4_readfn, |
| omap_dma4_writefn, s); |
| cpu_register_physical_memory(base, 0x1000, iomemtype); |
| |
| mpu->drq = s->dma->drq; |
| |
| return s->dma; |
| } |
| |
| struct omap_dma_lcd_channel_s *omap_dma_get_lcdch(struct soc_dma_s *dma) |
| { |
| struct omap_dma_s *s = dma->opaque; |
| |
| return &s->lcd_ch; |
| } |