| /* |
| * Maxim MAX1110/1111 ADC chip emulation. |
| * |
| * Copyright (c) 2006 Openedhand Ltd. |
| * Written by Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This code is licensed under the GNU GPLv2. |
| */ |
| |
| #include "ssi.h" |
| |
| typedef struct { |
| SSISlave ssidev; |
| qemu_irq interrupt; |
| uint8_t tb1, rb2, rb3; |
| int cycle; |
| |
| int input[8]; |
| int inputs, com; |
| } MAX111xState; |
| |
| /* Control-byte bitfields */ |
| #define CB_PD0 (1 << 0) |
| #define CB_PD1 (1 << 1) |
| #define CB_SGL (1 << 2) |
| #define CB_UNI (1 << 3) |
| #define CB_SEL0 (1 << 4) |
| #define CB_SEL1 (1 << 5) |
| #define CB_SEL2 (1 << 6) |
| #define CB_START (1 << 7) |
| |
| #define CHANNEL_NUM(v, b0, b1, b2) \ |
| ((((v) >> (2 + (b0))) & 4) | \ |
| (((v) >> (3 + (b1))) & 2) | \ |
| (((v) >> (4 + (b2))) & 1)) |
| |
| static uint32_t max111x_read(MAX111xState *s) |
| { |
| if (!s->tb1) |
| return 0; |
| |
| switch (s->cycle ++) { |
| case 1: |
| return s->rb2; |
| case 2: |
| return s->rb3; |
| } |
| |
| return 0; |
| } |
| |
| /* Interpret a control-byte */ |
| static void max111x_write(MAX111xState *s, uint32_t value) |
| { |
| int measure, chan; |
| |
| /* Ignore the value if START bit is zero */ |
| if (!(value & CB_START)) |
| return; |
| |
| s->cycle = 0; |
| |
| if (!(value & CB_PD1)) { |
| s->tb1 = 0; |
| return; |
| } |
| |
| s->tb1 = value; |
| |
| if (s->inputs == 8) |
| chan = CHANNEL_NUM(value, 1, 0, 2); |
| else |
| chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2); |
| |
| if (value & CB_SGL) |
| measure = s->input[chan] - s->com; |
| else |
| measure = s->input[chan] - s->input[chan ^ 1]; |
| |
| if (!(value & CB_UNI)) |
| measure ^= 0x80; |
| |
| s->rb2 = (measure >> 2) & 0x3f; |
| s->rb3 = (measure << 6) & 0xc0; |
| |
| /* FIXME: When should the IRQ be lowered? */ |
| qemu_irq_raise(s->interrupt); |
| } |
| |
| static uint32_t max111x_transfer(SSISlave *dev, uint32_t value) |
| { |
| MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev); |
| max111x_write(s, value); |
| return max111x_read(s); |
| } |
| |
| static void max111x_save(QEMUFile *f, void *opaque) |
| { |
| MAX111xState *s = (MAX111xState *) opaque; |
| int i; |
| |
| qemu_put_8s(f, &s->tb1); |
| qemu_put_8s(f, &s->rb2); |
| qemu_put_8s(f, &s->rb3); |
| qemu_put_be32(f, s->inputs); |
| qemu_put_be32(f, s->com); |
| for (i = 0; i < s->inputs; i ++) |
| qemu_put_byte(f, s->input[i]); |
| } |
| |
| static int max111x_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| MAX111xState *s = (MAX111xState *) opaque; |
| int i; |
| |
| qemu_get_8s(f, &s->tb1); |
| qemu_get_8s(f, &s->rb2); |
| qemu_get_8s(f, &s->rb3); |
| if (s->inputs != qemu_get_be32(f)) |
| return -EINVAL; |
| s->com = qemu_get_be32(f); |
| for (i = 0; i < s->inputs; i ++) |
| s->input[i] = qemu_get_byte(f); |
| |
| return 0; |
| } |
| |
| static int max111x_init(SSISlave *dev, int inputs) |
| { |
| MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev); |
| |
| qdev_init_gpio_out(&dev->qdev, &s->interrupt, 1); |
| |
| s->inputs = inputs; |
| /* TODO: add a user interface for setting these */ |
| s->input[0] = 0xf0; |
| s->input[1] = 0xe0; |
| s->input[2] = 0xd0; |
| s->input[3] = 0xc0; |
| s->input[4] = 0xb0; |
| s->input[5] = 0xa0; |
| s->input[6] = 0x90; |
| s->input[7] = 0x80; |
| s->com = 0; |
| |
| register_savevm("max111x", -1, 0, max111x_save, max111x_load, s); |
| return 0; |
| } |
| |
| static int max1110_init(SSISlave *dev) |
| { |
| return max111x_init(dev, 8); |
| } |
| |
| static int max1111_init(SSISlave *dev) |
| { |
| return max111x_init(dev, 4); |
| } |
| |
| void max111x_set_input(DeviceState *dev, int line, uint8_t value) |
| { |
| MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, SSI_SLAVE_FROM_QDEV(dev)); |
| assert(line >= 0 && line < s->inputs); |
| s->input[line] = value; |
| } |
| |
| static SSISlaveInfo max1110_info = { |
| .qdev.name = "max1110", |
| .qdev.size = sizeof(MAX111xState), |
| .init = max1110_init, |
| .transfer = max111x_transfer |
| }; |
| |
| static SSISlaveInfo max1111_info = { |
| .qdev.name = "max1111", |
| .qdev.size = sizeof(MAX111xState), |
| .init = max1111_init, |
| .transfer = max111x_transfer |
| }; |
| |
| static void max111x_register_devices(void) |
| { |
| ssi_register_slave(&max1110_info); |
| ssi_register_slave(&max1111_info); |
| } |
| |
| device_init(max111x_register_devices) |