| /* |
| * CXL Type 3 (memory expander) device |
| * |
| * Copyright(C) 2020 Intel Corporation. |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See the |
| * COPYING file in the top-level directory. |
| * |
| * SPDX-License-Identifier: GPL-v2-only |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qemu/error-report.h" |
| #include "qapi/qapi-commands-cxl.h" |
| #include "hw/mem/memory-device.h" |
| #include "hw/mem/pc-dimm.h" |
| #include "hw/pci/pci.h" |
| #include "hw/qdev-properties.h" |
| #include "qapi/error.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/pmem.h" |
| #include "qemu/range.h" |
| #include "qemu/rcu.h" |
| #include "qemu/guest-random.h" |
| #include "sysemu/hostmem.h" |
| #include "sysemu/numa.h" |
| #include "hw/cxl/cxl.h" |
| #include "hw/pci/msix.h" |
| |
| #define DWORD_BYTE 4 |
| #define CXL_CAPACITY_MULTIPLIER (256 * MiB) |
| |
| /* Default CDAT entries for a memory region */ |
| enum { |
| CT3_CDAT_DSMAS, |
| CT3_CDAT_DSLBIS0, |
| CT3_CDAT_DSLBIS1, |
| CT3_CDAT_DSLBIS2, |
| CT3_CDAT_DSLBIS3, |
| CT3_CDAT_DSEMTS, |
| CT3_CDAT_NUM_ENTRIES |
| }; |
| |
| static void ct3_build_cdat_entries_for_mr(CDATSubHeader **cdat_table, |
| int dsmad_handle, uint64_t size, |
| bool is_pmem, bool is_dynamic, |
| uint64_t dpa_base) |
| { |
| CDATDsmas *dsmas; |
| CDATDslbis *dslbis0; |
| CDATDslbis *dslbis1; |
| CDATDslbis *dslbis2; |
| CDATDslbis *dslbis3; |
| CDATDsemts *dsemts; |
| |
| dsmas = g_malloc(sizeof(*dsmas)); |
| *dsmas = (CDATDsmas) { |
| .header = { |
| .type = CDAT_TYPE_DSMAS, |
| .length = sizeof(*dsmas), |
| }, |
| .DSMADhandle = dsmad_handle, |
| .flags = (is_pmem ? CDAT_DSMAS_FLAG_NV : 0) | |
| (is_dynamic ? CDAT_DSMAS_FLAG_DYNAMIC_CAP : 0), |
| .DPA_base = dpa_base, |
| .DPA_length = size, |
| }; |
| |
| /* For now, no memory side cache, plausiblish numbers */ |
| dslbis0 = g_malloc(sizeof(*dslbis0)); |
| *dslbis0 = (CDATDslbis) { |
| .header = { |
| .type = CDAT_TYPE_DSLBIS, |
| .length = sizeof(*dslbis0), |
| }, |
| .handle = dsmad_handle, |
| .flags = HMAT_LB_MEM_MEMORY, |
| .data_type = HMAT_LB_DATA_READ_LATENCY, |
| .entry_base_unit = 10000, /* 10ns base */ |
| .entry[0] = 15, /* 150ns */ |
| }; |
| |
| dslbis1 = g_malloc(sizeof(*dslbis1)); |
| *dslbis1 = (CDATDslbis) { |
| .header = { |
| .type = CDAT_TYPE_DSLBIS, |
| .length = sizeof(*dslbis1), |
| }, |
| .handle = dsmad_handle, |
| .flags = HMAT_LB_MEM_MEMORY, |
| .data_type = HMAT_LB_DATA_WRITE_LATENCY, |
| .entry_base_unit = 10000, |
| .entry[0] = 25, /* 250ns */ |
| }; |
| |
| dslbis2 = g_malloc(sizeof(*dslbis2)); |
| *dslbis2 = (CDATDslbis) { |
| .header = { |
| .type = CDAT_TYPE_DSLBIS, |
| .length = sizeof(*dslbis2), |
| }, |
| .handle = dsmad_handle, |
| .flags = HMAT_LB_MEM_MEMORY, |
| .data_type = HMAT_LB_DATA_READ_BANDWIDTH, |
| .entry_base_unit = 1000, /* GB/s */ |
| .entry[0] = 16, |
| }; |
| |
| dslbis3 = g_malloc(sizeof(*dslbis3)); |
| *dslbis3 = (CDATDslbis) { |
| .header = { |
| .type = CDAT_TYPE_DSLBIS, |
| .length = sizeof(*dslbis3), |
| }, |
| .handle = dsmad_handle, |
| .flags = HMAT_LB_MEM_MEMORY, |
| .data_type = HMAT_LB_DATA_WRITE_BANDWIDTH, |
| .entry_base_unit = 1000, /* GB/s */ |
| .entry[0] = 16, |
| }; |
| |
| dsemts = g_malloc(sizeof(*dsemts)); |
| *dsemts = (CDATDsemts) { |
| .header = { |
| .type = CDAT_TYPE_DSEMTS, |
| .length = sizeof(*dsemts), |
| }, |
| .DSMAS_handle = dsmad_handle, |
| /* |
| * NV: Reserved - the non volatile from DSMAS matters |
| * V: EFI_MEMORY_SP |
| */ |
| .EFI_memory_type_attr = is_pmem ? 2 : 1, |
| .DPA_offset = 0, |
| .DPA_length = size, |
| }; |
| |
| /* Header always at start of structure */ |
| cdat_table[CT3_CDAT_DSMAS] = (CDATSubHeader *)dsmas; |
| cdat_table[CT3_CDAT_DSLBIS0] = (CDATSubHeader *)dslbis0; |
| cdat_table[CT3_CDAT_DSLBIS1] = (CDATSubHeader *)dslbis1; |
| cdat_table[CT3_CDAT_DSLBIS2] = (CDATSubHeader *)dslbis2; |
| cdat_table[CT3_CDAT_DSLBIS3] = (CDATSubHeader *)dslbis3; |
| cdat_table[CT3_CDAT_DSEMTS] = (CDATSubHeader *)dsemts; |
| } |
| |
| static int ct3_build_cdat_table(CDATSubHeader ***cdat_table, void *priv) |
| { |
| g_autofree CDATSubHeader **table = NULL; |
| CXLType3Dev *ct3d = priv; |
| MemoryRegion *volatile_mr = NULL, *nonvolatile_mr = NULL; |
| MemoryRegion *dc_mr = NULL; |
| uint64_t vmr_size = 0, pmr_size = 0; |
| int dsmad_handle = 0; |
| int cur_ent = 0; |
| int len = 0; |
| |
| if (!ct3d->hostpmem && !ct3d->hostvmem && !ct3d->dc.num_regions) { |
| return 0; |
| } |
| |
| if (ct3d->hostvmem) { |
| volatile_mr = host_memory_backend_get_memory(ct3d->hostvmem); |
| if (!volatile_mr) { |
| return -EINVAL; |
| } |
| len += CT3_CDAT_NUM_ENTRIES; |
| vmr_size = memory_region_size(volatile_mr); |
| } |
| |
| if (ct3d->hostpmem) { |
| nonvolatile_mr = host_memory_backend_get_memory(ct3d->hostpmem); |
| if (!nonvolatile_mr) { |
| return -EINVAL; |
| } |
| len += CT3_CDAT_NUM_ENTRIES; |
| pmr_size = memory_region_size(nonvolatile_mr); |
| } |
| |
| if (ct3d->dc.num_regions) { |
| if (!ct3d->dc.host_dc) { |
| return -EINVAL; |
| } |
| dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); |
| if (!dc_mr) { |
| return -EINVAL; |
| } |
| len += CT3_CDAT_NUM_ENTRIES * ct3d->dc.num_regions; |
| } |
| |
| table = g_malloc0(len * sizeof(*table)); |
| |
| /* Now fill them in */ |
| if (volatile_mr) { |
| ct3_build_cdat_entries_for_mr(table, dsmad_handle++, vmr_size, |
| false, false, 0); |
| cur_ent = CT3_CDAT_NUM_ENTRIES; |
| } |
| |
| if (nonvolatile_mr) { |
| uint64_t base = vmr_size; |
| ct3_build_cdat_entries_for_mr(&(table[cur_ent]), dsmad_handle++, |
| pmr_size, true, false, base); |
| cur_ent += CT3_CDAT_NUM_ENTRIES; |
| } |
| |
| if (dc_mr) { |
| int i; |
| uint64_t region_base = vmr_size + pmr_size; |
| |
| /* |
| * We assume the dynamic capacity to be volatile for now. |
| * Non-volatile dynamic capacity will be added if needed in the |
| * future. |
| */ |
| for (i = 0; i < ct3d->dc.num_regions; i++) { |
| ct3_build_cdat_entries_for_mr(&(table[cur_ent]), |
| dsmad_handle++, |
| ct3d->dc.regions[i].len, |
| false, true, region_base); |
| ct3d->dc.regions[i].dsmadhandle = dsmad_handle - 1; |
| |
| cur_ent += CT3_CDAT_NUM_ENTRIES; |
| region_base += ct3d->dc.regions[i].len; |
| } |
| } |
| |
| assert(len == cur_ent); |
| |
| *cdat_table = g_steal_pointer(&table); |
| |
| return len; |
| } |
| |
| static void ct3_free_cdat_table(CDATSubHeader **cdat_table, int num, void *priv) |
| { |
| int i; |
| |
| for (i = 0; i < num; i++) { |
| g_free(cdat_table[i]); |
| } |
| g_free(cdat_table); |
| } |
| |
| static bool cxl_doe_cdat_rsp(DOECap *doe_cap) |
| { |
| CDATObject *cdat = &CXL_TYPE3(doe_cap->pdev)->cxl_cstate.cdat; |
| uint16_t ent; |
| void *base; |
| uint32_t len; |
| CDATReq *req = pcie_doe_get_write_mbox_ptr(doe_cap); |
| CDATRsp rsp; |
| |
| assert(cdat->entry_len); |
| |
| /* Discard if request length mismatched */ |
| if (pcie_doe_get_obj_len(req) < |
| DIV_ROUND_UP(sizeof(CDATReq), DWORD_BYTE)) { |
| return false; |
| } |
| |
| ent = req->entry_handle; |
| base = cdat->entry[ent].base; |
| len = cdat->entry[ent].length; |
| |
| rsp = (CDATRsp) { |
| .header = { |
| .vendor_id = CXL_VENDOR_ID, |
| .data_obj_type = CXL_DOE_TABLE_ACCESS, |
| .reserved = 0x0, |
| .length = DIV_ROUND_UP((sizeof(rsp) + len), DWORD_BYTE), |
| }, |
| .rsp_code = CXL_DOE_TAB_RSP, |
| .table_type = CXL_DOE_TAB_TYPE_CDAT, |
| .entry_handle = (ent < cdat->entry_len - 1) ? |
| ent + 1 : CXL_DOE_TAB_ENT_MAX, |
| }; |
| |
| memcpy(doe_cap->read_mbox, &rsp, sizeof(rsp)); |
| memcpy(doe_cap->read_mbox + DIV_ROUND_UP(sizeof(rsp), DWORD_BYTE), |
| base, len); |
| |
| doe_cap->read_mbox_len += rsp.header.length; |
| |
| return true; |
| } |
| |
| static uint32_t ct3d_config_read(PCIDevice *pci_dev, uint32_t addr, int size) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(pci_dev); |
| uint32_t val; |
| |
| if (pcie_doe_read_config(&ct3d->doe_cdat, addr, size, &val)) { |
| return val; |
| } |
| |
| return pci_default_read_config(pci_dev, addr, size); |
| } |
| |
| static void ct3d_config_write(PCIDevice *pci_dev, uint32_t addr, uint32_t val, |
| int size) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(pci_dev); |
| |
| pcie_doe_write_config(&ct3d->doe_cdat, addr, val, size); |
| pci_default_write_config(pci_dev, addr, val, size); |
| pcie_aer_write_config(pci_dev, addr, val, size); |
| } |
| |
| /* |
| * Null value of all Fs suggested by IEEE RA guidelines for use of |
| * EU, OUI and CID |
| */ |
| #define UI64_NULL ~(0ULL) |
| |
| static void build_dvsecs(CXLType3Dev *ct3d) |
| { |
| CXLComponentState *cxl_cstate = &ct3d->cxl_cstate; |
| uint8_t *dvsec; |
| uint32_t range1_size_hi, range1_size_lo, |
| range1_base_hi = 0, range1_base_lo = 0, |
| range2_size_hi = 0, range2_size_lo = 0, |
| range2_base_hi = 0, range2_base_lo = 0; |
| |
| /* |
| * Volatile memory is mapped as (0x0) |
| * Persistent memory is mapped at (volatile->size) |
| */ |
| if (ct3d->hostvmem) { |
| range1_size_hi = ct3d->hostvmem->size >> 32; |
| range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | |
| (ct3d->hostvmem->size & 0xF0000000); |
| if (ct3d->hostpmem) { |
| range2_size_hi = ct3d->hostpmem->size >> 32; |
| range2_size_lo = (2 << 5) | (2 << 2) | 0x3 | |
| (ct3d->hostpmem->size & 0xF0000000); |
| } |
| } else if (ct3d->hostpmem) { |
| range1_size_hi = ct3d->hostpmem->size >> 32; |
| range1_size_lo = (2 << 5) | (2 << 2) | 0x3 | |
| (ct3d->hostpmem->size & 0xF0000000); |
| } else { |
| /* |
| * For DCD with no static memory, set memory active, memory class bits. |
| * No range is set. |
| */ |
| range1_size_hi = 0; |
| range1_size_lo = (2 << 5) | (2 << 2) | 0x3; |
| } |
| |
| dvsec = (uint8_t *)&(CXLDVSECDevice){ |
| .cap = 0x1e, |
| .ctrl = 0x2, |
| .status2 = 0x2, |
| .range1_size_hi = range1_size_hi, |
| .range1_size_lo = range1_size_lo, |
| .range1_base_hi = range1_base_hi, |
| .range1_base_lo = range1_base_lo, |
| .range2_size_hi = range2_size_hi, |
| .range2_size_lo = range2_size_lo, |
| .range2_base_hi = range2_base_hi, |
| .range2_base_lo = range2_base_lo, |
| }; |
| cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE, |
| PCIE_CXL_DEVICE_DVSEC_LENGTH, |
| PCIE_CXL_DEVICE_DVSEC, |
| PCIE_CXL31_DEVICE_DVSEC_REVID, dvsec); |
| |
| dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){ |
| .rsvd = 0, |
| .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX, |
| .reg0_base_hi = 0, |
| .reg1_base_lo = RBI_CXL_DEVICE_REG | CXL_DEVICE_REG_BAR_IDX, |
| .reg1_base_hi = 0, |
| }; |
| cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE, |
| REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC, |
| REG_LOC_DVSEC_REVID, dvsec); |
| dvsec = (uint8_t *)&(CXLDVSECDeviceGPF){ |
| .phase2_duration = 0x603, /* 3 seconds */ |
| .phase2_power = 0x33, /* 0x33 miliwatts */ |
| }; |
| cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE, |
| GPF_DEVICE_DVSEC_LENGTH, GPF_DEVICE_DVSEC, |
| GPF_DEVICE_DVSEC_REVID, dvsec); |
| |
| dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){ |
| .cap = 0x26, /* 68B, IO, Mem, non-MLD */ |
| .ctrl = 0x02, /* IO always enabled */ |
| .status = 0x26, /* same as capabilities */ |
| .rcvd_mod_ts_data_phase1 = 0xef, /* WTF? */ |
| }; |
| cxl_component_create_dvsec(cxl_cstate, CXL2_TYPE3_DEVICE, |
| PCIE_CXL3_FLEXBUS_PORT_DVSEC_LENGTH, |
| PCIE_FLEXBUS_PORT_DVSEC, |
| PCIE_CXL3_FLEXBUS_PORT_DVSEC_REVID, dvsec); |
| } |
| |
| static void hdm_decoder_commit(CXLType3Dev *ct3d, int which) |
| { |
| int hdm_inc = R_CXL_HDM_DECODER1_BASE_LO - R_CXL_HDM_DECODER0_BASE_LO; |
| ComponentRegisters *cregs = &ct3d->cxl_cstate.crb; |
| uint32_t *cache_mem = cregs->cache_mem_registers; |
| uint32_t ctrl; |
| |
| ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL + which * hdm_inc); |
| /* TODO: Sanity checks that the decoder is possible */ |
| ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0); |
| ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 1); |
| |
| stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL + which * hdm_inc, ctrl); |
| } |
| |
| static void hdm_decoder_uncommit(CXLType3Dev *ct3d, int which) |
| { |
| int hdm_inc = R_CXL_HDM_DECODER1_BASE_LO - R_CXL_HDM_DECODER0_BASE_LO; |
| ComponentRegisters *cregs = &ct3d->cxl_cstate.crb; |
| uint32_t *cache_mem = cregs->cache_mem_registers; |
| uint32_t ctrl; |
| |
| ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL + which * hdm_inc); |
| |
| ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, ERR, 0); |
| ctrl = FIELD_DP32(ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED, 0); |
| |
| stl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL + which * hdm_inc, ctrl); |
| } |
| |
| static int ct3d_qmp_uncor_err_to_cxl(CxlUncorErrorType qmp_err) |
| { |
| switch (qmp_err) { |
| case CXL_UNCOR_ERROR_TYPE_CACHE_DATA_PARITY: |
| return CXL_RAS_UNC_ERR_CACHE_DATA_PARITY; |
| case CXL_UNCOR_ERROR_TYPE_CACHE_ADDRESS_PARITY: |
| return CXL_RAS_UNC_ERR_CACHE_ADDRESS_PARITY; |
| case CXL_UNCOR_ERROR_TYPE_CACHE_BE_PARITY: |
| return CXL_RAS_UNC_ERR_CACHE_BE_PARITY; |
| case CXL_UNCOR_ERROR_TYPE_CACHE_DATA_ECC: |
| return CXL_RAS_UNC_ERR_CACHE_DATA_ECC; |
| case CXL_UNCOR_ERROR_TYPE_MEM_DATA_PARITY: |
| return CXL_RAS_UNC_ERR_MEM_DATA_PARITY; |
| case CXL_UNCOR_ERROR_TYPE_MEM_ADDRESS_PARITY: |
| return CXL_RAS_UNC_ERR_MEM_ADDRESS_PARITY; |
| case CXL_UNCOR_ERROR_TYPE_MEM_BE_PARITY: |
| return CXL_RAS_UNC_ERR_MEM_BE_PARITY; |
| case CXL_UNCOR_ERROR_TYPE_MEM_DATA_ECC: |
| return CXL_RAS_UNC_ERR_MEM_DATA_ECC; |
| case CXL_UNCOR_ERROR_TYPE_REINIT_THRESHOLD: |
| return CXL_RAS_UNC_ERR_REINIT_THRESHOLD; |
| case CXL_UNCOR_ERROR_TYPE_RSVD_ENCODING: |
| return CXL_RAS_UNC_ERR_RSVD_ENCODING; |
| case CXL_UNCOR_ERROR_TYPE_POISON_RECEIVED: |
| return CXL_RAS_UNC_ERR_POISON_RECEIVED; |
| case CXL_UNCOR_ERROR_TYPE_RECEIVER_OVERFLOW: |
| return CXL_RAS_UNC_ERR_RECEIVER_OVERFLOW; |
| case CXL_UNCOR_ERROR_TYPE_INTERNAL: |
| return CXL_RAS_UNC_ERR_INTERNAL; |
| case CXL_UNCOR_ERROR_TYPE_CXL_IDE_TX: |
| return CXL_RAS_UNC_ERR_CXL_IDE_TX; |
| case CXL_UNCOR_ERROR_TYPE_CXL_IDE_RX: |
| return CXL_RAS_UNC_ERR_CXL_IDE_RX; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ct3d_qmp_cor_err_to_cxl(CxlCorErrorType qmp_err) |
| { |
| switch (qmp_err) { |
| case CXL_COR_ERROR_TYPE_CACHE_DATA_ECC: |
| return CXL_RAS_COR_ERR_CACHE_DATA_ECC; |
| case CXL_COR_ERROR_TYPE_MEM_DATA_ECC: |
| return CXL_RAS_COR_ERR_MEM_DATA_ECC; |
| case CXL_COR_ERROR_TYPE_CRC_THRESHOLD: |
| return CXL_RAS_COR_ERR_CRC_THRESHOLD; |
| case CXL_COR_ERROR_TYPE_RETRY_THRESHOLD: |
| return CXL_RAS_COR_ERR_RETRY_THRESHOLD; |
| case CXL_COR_ERROR_TYPE_CACHE_POISON_RECEIVED: |
| return CXL_RAS_COR_ERR_CACHE_POISON_RECEIVED; |
| case CXL_COR_ERROR_TYPE_MEM_POISON_RECEIVED: |
| return CXL_RAS_COR_ERR_MEM_POISON_RECEIVED; |
| case CXL_COR_ERROR_TYPE_PHYSICAL: |
| return CXL_RAS_COR_ERR_PHYSICAL; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| CXLComponentState *cxl_cstate = opaque; |
| ComponentRegisters *cregs = &cxl_cstate->crb; |
| CXLType3Dev *ct3d = container_of(cxl_cstate, CXLType3Dev, cxl_cstate); |
| uint32_t *cache_mem = cregs->cache_mem_registers; |
| bool should_commit = false; |
| bool should_uncommit = false; |
| int which_hdm = -1; |
| |
| assert(size == 4); |
| g_assert(offset < CXL2_COMPONENT_CM_REGION_SIZE); |
| |
| switch (offset) { |
| case A_CXL_HDM_DECODER0_CTRL: |
| should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT); |
| should_uncommit = !should_commit; |
| which_hdm = 0; |
| break; |
| case A_CXL_HDM_DECODER1_CTRL: |
| should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT); |
| should_uncommit = !should_commit; |
| which_hdm = 1; |
| break; |
| case A_CXL_HDM_DECODER2_CTRL: |
| should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT); |
| should_uncommit = !should_commit; |
| which_hdm = 2; |
| break; |
| case A_CXL_HDM_DECODER3_CTRL: |
| should_commit = FIELD_EX32(value, CXL_HDM_DECODER0_CTRL, COMMIT); |
| should_uncommit = !should_commit; |
| which_hdm = 3; |
| break; |
| case A_CXL_RAS_UNC_ERR_STATUS: |
| { |
| uint32_t capctrl = ldl_le_p(cache_mem + R_CXL_RAS_ERR_CAP_CTRL); |
| uint32_t fe = FIELD_EX32(capctrl, CXL_RAS_ERR_CAP_CTRL, |
| FIRST_ERROR_POINTER); |
| CXLError *cxl_err; |
| uint32_t unc_err; |
| |
| /* |
| * If single bit written that corresponds to the first error |
| * pointer being cleared, update the status and header log. |
| */ |
| if (!QTAILQ_EMPTY(&ct3d->error_list)) { |
| if ((1 << fe) ^ value) { |
| CXLError *cxl_next; |
| /* |
| * Software is using wrong flow for multiple header recording |
| * Following behavior in PCIe r6.0 and assuming multiple |
| * header support. Implementation defined choice to clear all |
| * matching records if more than one bit set - which corresponds |
| * closest to behavior of hardware not capable of multiple |
| * header recording. |
| */ |
| QTAILQ_FOREACH_SAFE(cxl_err, &ct3d->error_list, node, |
| cxl_next) { |
| if ((1 << cxl_err->type) & value) { |
| QTAILQ_REMOVE(&ct3d->error_list, cxl_err, node); |
| g_free(cxl_err); |
| } |
| } |
| } else { |
| /* Done with previous FE, so drop from list */ |
| cxl_err = QTAILQ_FIRST(&ct3d->error_list); |
| QTAILQ_REMOVE(&ct3d->error_list, cxl_err, node); |
| g_free(cxl_err); |
| } |
| |
| /* |
| * If there is another FE, then put that in place and update |
| * the header log |
| */ |
| if (!QTAILQ_EMPTY(&ct3d->error_list)) { |
| uint32_t *header_log = &cache_mem[R_CXL_RAS_ERR_HEADER0]; |
| int i; |
| |
| cxl_err = QTAILQ_FIRST(&ct3d->error_list); |
| for (i = 0; i < CXL_RAS_ERR_HEADER_NUM; i++) { |
| stl_le_p(header_log + i, cxl_err->header[i]); |
| } |
| capctrl = FIELD_DP32(capctrl, CXL_RAS_ERR_CAP_CTRL, |
| FIRST_ERROR_POINTER, cxl_err->type); |
| } else { |
| /* |
| * If no more errors, then follow recommendation of PCI spec |
| * r6.0 6.2.4.2 to set the first error pointer to a status |
| * bit that will never be used. |
| */ |
| capctrl = FIELD_DP32(capctrl, CXL_RAS_ERR_CAP_CTRL, |
| FIRST_ERROR_POINTER, |
| CXL_RAS_UNC_ERR_CXL_UNUSED); |
| } |
| stl_le_p((uint8_t *)cache_mem + A_CXL_RAS_ERR_CAP_CTRL, capctrl); |
| } |
| unc_err = 0; |
| QTAILQ_FOREACH(cxl_err, &ct3d->error_list, node) { |
| unc_err |= 1 << cxl_err->type; |
| } |
| stl_le_p((uint8_t *)cache_mem + offset, unc_err); |
| |
| return; |
| } |
| case A_CXL_RAS_COR_ERR_STATUS: |
| { |
| uint32_t rw1c = value; |
| uint32_t temp = ldl_le_p((uint8_t *)cache_mem + offset); |
| temp &= ~rw1c; |
| stl_le_p((uint8_t *)cache_mem + offset, temp); |
| return; |
| } |
| default: |
| break; |
| } |
| |
| stl_le_p((uint8_t *)cache_mem + offset, value); |
| if (should_commit) { |
| hdm_decoder_commit(ct3d, which_hdm); |
| } else if (should_uncommit) { |
| hdm_decoder_uncommit(ct3d, which_hdm); |
| } |
| } |
| |
| /* |
| * TODO: dc region configuration will be updated once host backend and address |
| * space support is added for DCD. |
| */ |
| static bool cxl_create_dc_regions(CXLType3Dev *ct3d, Error **errp) |
| { |
| int i; |
| uint64_t region_base = 0; |
| uint64_t region_len; |
| uint64_t decode_len; |
| uint64_t blk_size = 2 * MiB; |
| CXLDCRegion *region; |
| MemoryRegion *mr; |
| uint64_t dc_size; |
| |
| mr = host_memory_backend_get_memory(ct3d->dc.host_dc); |
| dc_size = memory_region_size(mr); |
| region_len = DIV_ROUND_UP(dc_size, ct3d->dc.num_regions); |
| |
| if (dc_size % (ct3d->dc.num_regions * CXL_CAPACITY_MULTIPLIER) != 0) { |
| error_setg(errp, |
| "backend size is not multiple of region len: 0x%" PRIx64, |
| region_len); |
| return false; |
| } |
| if (region_len % CXL_CAPACITY_MULTIPLIER != 0) { |
| error_setg(errp, "DC region size is unaligned to 0x%" PRIx64, |
| CXL_CAPACITY_MULTIPLIER); |
| return false; |
| } |
| decode_len = region_len; |
| |
| if (ct3d->hostvmem) { |
| mr = host_memory_backend_get_memory(ct3d->hostvmem); |
| region_base += memory_region_size(mr); |
| } |
| if (ct3d->hostpmem) { |
| mr = host_memory_backend_get_memory(ct3d->hostpmem); |
| region_base += memory_region_size(mr); |
| } |
| if (region_base % CXL_CAPACITY_MULTIPLIER != 0) { |
| error_setg(errp, "DC region base not aligned to 0x%" PRIx64, |
| CXL_CAPACITY_MULTIPLIER); |
| return false; |
| } |
| |
| for (i = 0, region = &ct3d->dc.regions[0]; |
| i < ct3d->dc.num_regions; |
| i++, region++, region_base += region_len) { |
| *region = (CXLDCRegion) { |
| .base = region_base, |
| .decode_len = decode_len, |
| .len = region_len, |
| .block_size = blk_size, |
| /* dsmad_handle set when creating CDAT table entries */ |
| .flags = 0, |
| }; |
| ct3d->dc.total_capacity += region->len; |
| region->blk_bitmap = bitmap_new(region->len / region->block_size); |
| } |
| QTAILQ_INIT(&ct3d->dc.extents); |
| QTAILQ_INIT(&ct3d->dc.extents_pending); |
| |
| return true; |
| } |
| |
| static void cxl_destroy_dc_regions(CXLType3Dev *ct3d) |
| { |
| CXLDCExtent *ent, *ent_next; |
| CXLDCExtentGroup *group, *group_next; |
| int i; |
| CXLDCRegion *region; |
| |
| QTAILQ_FOREACH_SAFE(ent, &ct3d->dc.extents, node, ent_next) { |
| cxl_remove_extent_from_extent_list(&ct3d->dc.extents, ent); |
| } |
| |
| QTAILQ_FOREACH_SAFE(group, &ct3d->dc.extents_pending, node, group_next) { |
| QTAILQ_REMOVE(&ct3d->dc.extents_pending, group, node); |
| QTAILQ_FOREACH_SAFE(ent, &group->list, node, ent_next) { |
| cxl_remove_extent_from_extent_list(&group->list, ent); |
| } |
| g_free(group); |
| } |
| |
| for (i = 0; i < ct3d->dc.num_regions; i++) { |
| region = &ct3d->dc.regions[i]; |
| g_free(region->blk_bitmap); |
| } |
| } |
| |
| static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp) |
| { |
| DeviceState *ds = DEVICE(ct3d); |
| |
| if (!ct3d->hostmem && !ct3d->hostvmem && !ct3d->hostpmem |
| && !ct3d->dc.num_regions) { |
| error_setg(errp, "at least one memdev property must be set"); |
| return false; |
| } else if (ct3d->hostmem && ct3d->hostpmem) { |
| error_setg(errp, "[memdev] cannot be used with new " |
| "[persistent-memdev] property"); |
| return false; |
| } else if (ct3d->hostmem) { |
| /* Use of hostmem property implies pmem */ |
| ct3d->hostpmem = ct3d->hostmem; |
| ct3d->hostmem = NULL; |
| } |
| |
| if (ct3d->hostpmem && !ct3d->lsa) { |
| error_setg(errp, "lsa property must be set for persistent devices"); |
| return false; |
| } |
| |
| if (ct3d->hostvmem) { |
| MemoryRegion *vmr; |
| char *v_name; |
| |
| vmr = host_memory_backend_get_memory(ct3d->hostvmem); |
| if (!vmr) { |
| error_setg(errp, "volatile memdev must have backing device"); |
| return false; |
| } |
| if (host_memory_backend_is_mapped(ct3d->hostvmem)) { |
| error_setg(errp, "memory backend %s can't be used multiple times.", |
| object_get_canonical_path_component(OBJECT(ct3d->hostvmem))); |
| return false; |
| } |
| memory_region_set_nonvolatile(vmr, false); |
| memory_region_set_enabled(vmr, true); |
| host_memory_backend_set_mapped(ct3d->hostvmem, true); |
| if (ds->id) { |
| v_name = g_strdup_printf("cxl-type3-dpa-vmem-space:%s", ds->id); |
| } else { |
| v_name = g_strdup("cxl-type3-dpa-vmem-space"); |
| } |
| address_space_init(&ct3d->hostvmem_as, vmr, v_name); |
| ct3d->cxl_dstate.vmem_size = memory_region_size(vmr); |
| ct3d->cxl_dstate.static_mem_size += memory_region_size(vmr); |
| g_free(v_name); |
| } |
| |
| if (ct3d->hostpmem) { |
| MemoryRegion *pmr; |
| char *p_name; |
| |
| pmr = host_memory_backend_get_memory(ct3d->hostpmem); |
| if (!pmr) { |
| error_setg(errp, "persistent memdev must have backing device"); |
| return false; |
| } |
| if (host_memory_backend_is_mapped(ct3d->hostpmem)) { |
| error_setg(errp, "memory backend %s can't be used multiple times.", |
| object_get_canonical_path_component(OBJECT(ct3d->hostpmem))); |
| return false; |
| } |
| memory_region_set_nonvolatile(pmr, true); |
| memory_region_set_enabled(pmr, true); |
| host_memory_backend_set_mapped(ct3d->hostpmem, true); |
| if (ds->id) { |
| p_name = g_strdup_printf("cxl-type3-dpa-pmem-space:%s", ds->id); |
| } else { |
| p_name = g_strdup("cxl-type3-dpa-pmem-space"); |
| } |
| address_space_init(&ct3d->hostpmem_as, pmr, p_name); |
| ct3d->cxl_dstate.pmem_size = memory_region_size(pmr); |
| ct3d->cxl_dstate.static_mem_size += memory_region_size(pmr); |
| g_free(p_name); |
| } |
| |
| ct3d->dc.total_capacity = 0; |
| if (ct3d->dc.num_regions > 0) { |
| MemoryRegion *dc_mr; |
| char *dc_name; |
| |
| if (!ct3d->dc.host_dc) { |
| error_setg(errp, "dynamic capacity must have a backing device"); |
| return false; |
| } |
| |
| dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); |
| if (!dc_mr) { |
| error_setg(errp, "dynamic capacity must have a backing device"); |
| return false; |
| } |
| |
| if (host_memory_backend_is_mapped(ct3d->dc.host_dc)) { |
| error_setg(errp, "memory backend %s can't be used multiple times.", |
| object_get_canonical_path_component(OBJECT(ct3d->dc.host_dc))); |
| return false; |
| } |
| /* |
| * Set DC regions as volatile for now, non-volatile support can |
| * be added in the future if needed. |
| */ |
| memory_region_set_nonvolatile(dc_mr, false); |
| memory_region_set_enabled(dc_mr, true); |
| host_memory_backend_set_mapped(ct3d->dc.host_dc, true); |
| if (ds->id) { |
| dc_name = g_strdup_printf("cxl-dcd-dpa-dc-space:%s", ds->id); |
| } else { |
| dc_name = g_strdup("cxl-dcd-dpa-dc-space"); |
| } |
| address_space_init(&ct3d->dc.host_dc_as, dc_mr, dc_name); |
| g_free(dc_name); |
| |
| if (!cxl_create_dc_regions(ct3d, errp)) { |
| error_append_hint(errp, "setup DC regions failed"); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static DOEProtocol doe_cdat_prot[] = { |
| { CXL_VENDOR_ID, CXL_DOE_TABLE_ACCESS, cxl_doe_cdat_rsp }, |
| { } |
| }; |
| |
| static void ct3_realize(PCIDevice *pci_dev, Error **errp) |
| { |
| ERRP_GUARD(); |
| CXLType3Dev *ct3d = CXL_TYPE3(pci_dev); |
| CXLComponentState *cxl_cstate = &ct3d->cxl_cstate; |
| ComponentRegisters *regs = &cxl_cstate->crb; |
| MemoryRegion *mr = ®s->component_registers; |
| uint8_t *pci_conf = pci_dev->config; |
| unsigned short msix_num = 6; |
| int i, rc; |
| uint16_t count; |
| |
| QTAILQ_INIT(&ct3d->error_list); |
| |
| if (!cxl_setup_memory(ct3d, errp)) { |
| return; |
| } |
| |
| pci_config_set_prog_interface(pci_conf, 0x10); |
| |
| pcie_endpoint_cap_init(pci_dev, 0x80); |
| if (ct3d->sn != UI64_NULL) { |
| pcie_dev_ser_num_init(pci_dev, 0x100, ct3d->sn); |
| cxl_cstate->dvsec_offset = 0x100 + 0x0c; |
| } else { |
| cxl_cstate->dvsec_offset = 0x100; |
| } |
| |
| ct3d->cxl_cstate.pdev = pci_dev; |
| build_dvsecs(ct3d); |
| |
| regs->special_ops = g_new0(MemoryRegionOps, 1); |
| regs->special_ops->write = ct3d_reg_write; |
| |
| cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate, |
| TYPE_CXL_TYPE3); |
| |
| pci_register_bar( |
| pci_dev, CXL_COMPONENT_REG_BAR_IDX, |
| PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64, mr); |
| |
| cxl_device_register_block_init(OBJECT(pci_dev), &ct3d->cxl_dstate, |
| &ct3d->cci); |
| pci_register_bar(pci_dev, CXL_DEVICE_REG_BAR_IDX, |
| PCI_BASE_ADDRESS_SPACE_MEMORY | |
| PCI_BASE_ADDRESS_MEM_TYPE_64, |
| &ct3d->cxl_dstate.device_registers); |
| |
| /* MSI(-X) Initialization */ |
| rc = msix_init_exclusive_bar(pci_dev, msix_num, 4, NULL); |
| if (rc) { |
| goto err_address_space_free; |
| } |
| for (i = 0; i < msix_num; i++) { |
| msix_vector_use(pci_dev, i); |
| } |
| |
| /* DOE Initialization */ |
| pcie_doe_init(pci_dev, &ct3d->doe_cdat, 0x190, doe_cdat_prot, true, 0); |
| |
| cxl_cstate->cdat.build_cdat_table = ct3_build_cdat_table; |
| cxl_cstate->cdat.free_cdat_table = ct3_free_cdat_table; |
| cxl_cstate->cdat.private = ct3d; |
| if (!cxl_doe_cdat_init(cxl_cstate, errp)) { |
| goto err_free_special_ops; |
| } |
| |
| pcie_cap_deverr_init(pci_dev); |
| /* Leave a bit of room for expansion */ |
| rc = pcie_aer_init(pci_dev, PCI_ERR_VER, 0x200, PCI_ERR_SIZEOF, NULL); |
| if (rc) { |
| goto err_release_cdat; |
| } |
| cxl_event_init(&ct3d->cxl_dstate, 2); |
| |
| /* Set default value for patrol scrub attributes */ |
| ct3d->patrol_scrub_attrs.scrub_cycle_cap = |
| CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_DEFAULT | |
| CXL_MEMDEV_PS_SCRUB_REALTIME_REPORT_CAP_DEFAULT; |
| ct3d->patrol_scrub_attrs.scrub_cycle = |
| CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_DEFAULT | |
| (CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_DEFAULT << 8); |
| ct3d->patrol_scrub_attrs.scrub_flags = CXL_MEMDEV_PS_ENABLE_DEFAULT; |
| |
| /* Set default value for DDR5 ECS read attributes */ |
| for (count = 0; count < CXL_ECS_NUM_MEDIA_FRUS; count++) { |
| ct3d->ecs_attrs[count].ecs_log_cap = |
| CXL_ECS_LOG_ENTRY_TYPE_DEFAULT; |
| ct3d->ecs_attrs[count].ecs_cap = |
| CXL_ECS_REALTIME_REPORT_CAP_DEFAULT; |
| ct3d->ecs_attrs[count].ecs_config = |
| CXL_ECS_THRESHOLD_COUNT_DEFAULT | |
| (CXL_ECS_MODE_DEFAULT << 3); |
| /* Reserved */ |
| ct3d->ecs_attrs[count].ecs_flags = 0; |
| } |
| |
| return; |
| |
| err_release_cdat: |
| cxl_doe_cdat_release(cxl_cstate); |
| err_free_special_ops: |
| g_free(regs->special_ops); |
| err_address_space_free: |
| if (ct3d->dc.host_dc) { |
| cxl_destroy_dc_regions(ct3d); |
| address_space_destroy(&ct3d->dc.host_dc_as); |
| } |
| if (ct3d->hostpmem) { |
| address_space_destroy(&ct3d->hostpmem_as); |
| } |
| if (ct3d->hostvmem) { |
| address_space_destroy(&ct3d->hostvmem_as); |
| } |
| return; |
| } |
| |
| static void ct3_exit(PCIDevice *pci_dev) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(pci_dev); |
| CXLComponentState *cxl_cstate = &ct3d->cxl_cstate; |
| ComponentRegisters *regs = &cxl_cstate->crb; |
| |
| pcie_aer_exit(pci_dev); |
| cxl_doe_cdat_release(cxl_cstate); |
| g_free(regs->special_ops); |
| if (ct3d->dc.host_dc) { |
| cxl_destroy_dc_regions(ct3d); |
| address_space_destroy(&ct3d->dc.host_dc_as); |
| } |
| if (ct3d->hostpmem) { |
| address_space_destroy(&ct3d->hostpmem_as); |
| } |
| if (ct3d->hostvmem) { |
| address_space_destroy(&ct3d->hostvmem_as); |
| } |
| } |
| |
| /* |
| * Mark the DPA range [dpa, dap + len - 1] to be backed and accessible. This |
| * happens when a DC extent is added and accepted by the host. |
| */ |
| void ct3_set_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa, |
| uint64_t len) |
| { |
| CXLDCRegion *region; |
| |
| region = cxl_find_dc_region(ct3d, dpa, len); |
| if (!region) { |
| return; |
| } |
| |
| bitmap_set(region->blk_bitmap, (dpa - region->base) / region->block_size, |
| len / region->block_size); |
| } |
| |
| /* |
| * Check whether the DPA range [dpa, dpa + len - 1] is backed with DC extents. |
| * Used when validating read/write to dc regions |
| */ |
| bool ct3_test_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa, |
| uint64_t len) |
| { |
| CXLDCRegion *region; |
| uint64_t nbits; |
| long nr; |
| |
| region = cxl_find_dc_region(ct3d, dpa, len); |
| if (!region) { |
| return false; |
| } |
| |
| nr = (dpa - region->base) / region->block_size; |
| nbits = DIV_ROUND_UP(len, region->block_size); |
| /* |
| * if bits between [dpa, dpa + len) are all 1s, meaning the DPA range is |
| * backed with DC extents, return true; else return false. |
| */ |
| return find_next_zero_bit(region->blk_bitmap, nr + nbits, nr) == nr + nbits; |
| } |
| |
| /* |
| * Mark the DPA range [dpa, dap + len - 1] to be unbacked and inaccessible. |
| * This happens when a dc extent is released by the host. |
| */ |
| void ct3_clear_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa, |
| uint64_t len) |
| { |
| CXLDCRegion *region; |
| uint64_t nbits; |
| long nr; |
| |
| region = cxl_find_dc_region(ct3d, dpa, len); |
| if (!region) { |
| return; |
| } |
| |
| nr = (dpa - region->base) / region->block_size; |
| nbits = len / region->block_size; |
| bitmap_clear(region->blk_bitmap, nr, nbits); |
| } |
| |
| static bool cxl_type3_dpa(CXLType3Dev *ct3d, hwaddr host_addr, uint64_t *dpa) |
| { |
| int hdm_inc = R_CXL_HDM_DECODER1_BASE_LO - R_CXL_HDM_DECODER0_BASE_LO; |
| uint32_t *cache_mem = ct3d->cxl_cstate.crb.cache_mem_registers; |
| unsigned int hdm_count; |
| uint32_t cap; |
| uint64_t dpa_base = 0; |
| int i; |
| |
| cap = ldl_le_p(cache_mem + R_CXL_HDM_DECODER_CAPABILITY); |
| hdm_count = cxl_decoder_count_dec(FIELD_EX32(cap, |
| CXL_HDM_DECODER_CAPABILITY, |
| DECODER_COUNT)); |
| |
| for (i = 0; i < hdm_count; i++) { |
| uint64_t decoder_base, decoder_size, hpa_offset, skip; |
| uint32_t hdm_ctrl, low, high; |
| int ig, iw; |
| |
| low = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_BASE_LO + i * hdm_inc); |
| high = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_BASE_HI + i * hdm_inc); |
| decoder_base = ((uint64_t)high << 32) | (low & 0xf0000000); |
| |
| low = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_SIZE_LO + i * hdm_inc); |
| high = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_SIZE_HI + i * hdm_inc); |
| decoder_size = ((uint64_t)high << 32) | (low & 0xf0000000); |
| |
| low = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_DPA_SKIP_LO + |
| i * hdm_inc); |
| high = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_DPA_SKIP_HI + |
| i * hdm_inc); |
| skip = ((uint64_t)high << 32) | (low & 0xf0000000); |
| dpa_base += skip; |
| |
| hpa_offset = (uint64_t)host_addr - decoder_base; |
| |
| hdm_ctrl = ldl_le_p(cache_mem + R_CXL_HDM_DECODER0_CTRL + i * hdm_inc); |
| iw = FIELD_EX32(hdm_ctrl, CXL_HDM_DECODER0_CTRL, IW); |
| ig = FIELD_EX32(hdm_ctrl, CXL_HDM_DECODER0_CTRL, IG); |
| if (!FIELD_EX32(hdm_ctrl, CXL_HDM_DECODER0_CTRL, COMMITTED)) { |
| return false; |
| } |
| if (((uint64_t)host_addr < decoder_base) || |
| (hpa_offset >= decoder_size)) { |
| int decoded_iw = cxl_interleave_ways_dec(iw, &error_fatal); |
| |
| if (decoded_iw == 0) { |
| return false; |
| } |
| |
| dpa_base += decoder_size / decoded_iw; |
| continue; |
| } |
| |
| *dpa = dpa_base + |
| ((MAKE_64BIT_MASK(0, 8 + ig) & hpa_offset) | |
| ((MAKE_64BIT_MASK(8 + ig + iw, 64 - 8 - ig - iw) & hpa_offset) |
| >> iw)); |
| |
| return true; |
| } |
| return false; |
| } |
| |
| static int cxl_type3_hpa_to_as_and_dpa(CXLType3Dev *ct3d, |
| hwaddr host_addr, |
| unsigned int size, |
| AddressSpace **as, |
| uint64_t *dpa_offset) |
| { |
| MemoryRegion *vmr = NULL, *pmr = NULL, *dc_mr = NULL; |
| uint64_t vmr_size = 0, pmr_size = 0, dc_size = 0; |
| |
| if (ct3d->hostvmem) { |
| vmr = host_memory_backend_get_memory(ct3d->hostvmem); |
| vmr_size = memory_region_size(vmr); |
| } |
| if (ct3d->hostpmem) { |
| pmr = host_memory_backend_get_memory(ct3d->hostpmem); |
| pmr_size = memory_region_size(pmr); |
| } |
| if (ct3d->dc.host_dc) { |
| dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); |
| dc_size = memory_region_size(dc_mr); |
| } |
| |
| if (!vmr && !pmr && !dc_mr) { |
| return -ENODEV; |
| } |
| |
| if (!cxl_type3_dpa(ct3d, host_addr, dpa_offset)) { |
| return -EINVAL; |
| } |
| |
| if (*dpa_offset >= vmr_size + pmr_size + dc_size) { |
| return -EINVAL; |
| } |
| |
| if (*dpa_offset < vmr_size) { |
| *as = &ct3d->hostvmem_as; |
| } else if (*dpa_offset < vmr_size + pmr_size) { |
| *as = &ct3d->hostpmem_as; |
| *dpa_offset -= vmr_size; |
| } else { |
| if (!ct3_test_region_block_backed(ct3d, *dpa_offset, size)) { |
| return -ENODEV; |
| } |
| |
| *as = &ct3d->dc.host_dc_as; |
| *dpa_offset -= (vmr_size + pmr_size); |
| } |
| |
| return 0; |
| } |
| |
| MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data, |
| unsigned size, MemTxAttrs attrs) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(d); |
| uint64_t dpa_offset = 0; |
| AddressSpace *as = NULL; |
| int res; |
| |
| res = cxl_type3_hpa_to_as_and_dpa(ct3d, host_addr, size, |
| &as, &dpa_offset); |
| if (res) { |
| return MEMTX_ERROR; |
| } |
| |
| if (cxl_dev_media_disabled(&ct3d->cxl_dstate)) { |
| qemu_guest_getrandom_nofail(data, size); |
| return MEMTX_OK; |
| } |
| |
| return address_space_read(as, dpa_offset, attrs, data, size); |
| } |
| |
| MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data, |
| unsigned size, MemTxAttrs attrs) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(d); |
| uint64_t dpa_offset = 0; |
| AddressSpace *as = NULL; |
| int res; |
| |
| res = cxl_type3_hpa_to_as_and_dpa(ct3d, host_addr, size, |
| &as, &dpa_offset); |
| if (res) { |
| return MEMTX_ERROR; |
| } |
| |
| if (cxl_dev_media_disabled(&ct3d->cxl_dstate)) { |
| return MEMTX_OK; |
| } |
| |
| return address_space_write(as, dpa_offset, attrs, &data, size); |
| } |
| |
| static void ct3d_reset(DeviceState *dev) |
| { |
| CXLType3Dev *ct3d = CXL_TYPE3(dev); |
| uint32_t *reg_state = ct3d->cxl_cstate.crb.cache_mem_registers; |
| uint32_t *write_msk = ct3d->cxl_cstate.crb.cache_mem_regs_write_mask; |
| |
| cxl_component_register_init_common(reg_state, write_msk, CXL2_TYPE3_DEVICE); |
| cxl_device_register_init_t3(ct3d); |
| |
| /* |
| * Bring up an endpoint to target with MCTP over VDM. |
| * This device is emulating an MLD with single LD for now. |
| */ |
| cxl_initialize_t3_fm_owned_ld_mctpcci(&ct3d->vdm_fm_owned_ld_mctp_cci, |
| DEVICE(ct3d), DEVICE(ct3d), |
| 512); /* Max payload made up */ |
| cxl_initialize_t3_ld_cci(&ct3d->ld0_cci, DEVICE(ct3d), DEVICE(ct3d), |
| 512); /* Max payload made up */ |
| |
| } |
| |
| static Property ct3_props[] = { |
| DEFINE_PROP_LINK("memdev", CXLType3Dev, hostmem, TYPE_MEMORY_BACKEND, |
| HostMemoryBackend *), /* for backward compatibility */ |
| DEFINE_PROP_LINK("persistent-memdev", CXLType3Dev, hostpmem, |
| TYPE_MEMORY_BACKEND, HostMemoryBackend *), |
| DEFINE_PROP_LINK("volatile-memdev", CXLType3Dev, hostvmem, |
| TYPE_MEMORY_BACKEND, HostMemoryBackend *), |
| DEFINE_PROP_LINK("lsa", CXLType3Dev, lsa, TYPE_MEMORY_BACKEND, |
| HostMemoryBackend *), |
| DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, UI64_NULL), |
| DEFINE_PROP_STRING("cdat", CXLType3Dev, cxl_cstate.cdat.filename), |
| DEFINE_PROP_UINT8("num-dc-regions", CXLType3Dev, dc.num_regions, 0), |
| DEFINE_PROP_LINK("volatile-dc-memdev", CXLType3Dev, dc.host_dc, |
| TYPE_MEMORY_BACKEND, HostMemoryBackend *), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static uint64_t get_lsa_size(CXLType3Dev *ct3d) |
| { |
| MemoryRegion *mr; |
| |
| if (!ct3d->lsa) { |
| return 0; |
| } |
| |
| mr = host_memory_backend_get_memory(ct3d->lsa); |
| return memory_region_size(mr); |
| } |
| |
| static void validate_lsa_access(MemoryRegion *mr, uint64_t size, |
| uint64_t offset) |
| { |
| assert(offset + size <= memory_region_size(mr)); |
| assert(offset + size > offset); |
| } |
| |
| static uint64_t get_lsa(CXLType3Dev *ct3d, void *buf, uint64_t size, |
| uint64_t offset) |
| { |
| MemoryRegion *mr; |
| void *lsa; |
| |
| if (!ct3d->lsa) { |
| return 0; |
| } |
| |
| mr = host_memory_backend_get_memory(ct3d->lsa); |
| validate_lsa_access(mr, size, offset); |
| |
| lsa = memory_region_get_ram_ptr(mr) + offset; |
| memcpy(buf, lsa, size); |
| |
| return size; |
| } |
| |
| static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size, |
| uint64_t offset) |
| { |
| MemoryRegion *mr; |
| void *lsa; |
| |
| if (!ct3d->lsa) { |
| return; |
| } |
| |
| mr = host_memory_backend_get_memory(ct3d->lsa); |
| validate_lsa_access(mr, size, offset); |
| |
| lsa = memory_region_get_ram_ptr(mr) + offset; |
| memcpy(lsa, buf, size); |
| memory_region_set_dirty(mr, offset, size); |
| |
| /* |
| * Just like the PMEM, if the guest is not allowed to exit gracefully, label |
| * updates will get lost. |
| */ |
| } |
| |
| static bool set_cacheline(CXLType3Dev *ct3d, uint64_t dpa_offset, uint8_t *data) |
| { |
| MemoryRegion *vmr = NULL, *pmr = NULL, *dc_mr = NULL; |
| AddressSpace *as; |
| uint64_t vmr_size = 0, pmr_size = 0, dc_size = 0; |
| |
| if (ct3d->hostvmem) { |
| vmr = host_memory_backend_get_memory(ct3d->hostvmem); |
| vmr_size = memory_region_size(vmr); |
| } |
| if (ct3d->hostpmem) { |
| pmr = host_memory_backend_get_memory(ct3d->hostpmem); |
| pmr_size = memory_region_size(pmr); |
| } |
| if (ct3d->dc.host_dc) { |
| dc_mr = host_memory_backend_get_memory(ct3d->dc.host_dc); |
| dc_size = memory_region_size(dc_mr); |
| } |
| |
| if (!vmr && !pmr && !dc_mr) { |
| return false; |
| } |
| |
| if (dpa_offset + CXL_CACHE_LINE_SIZE > vmr_size + pmr_size + dc_size) { |
| return false; |
| } |
| |
| if (dpa_offset < vmr_size) { |
| as = &ct3d->hostvmem_as; |
| } else if (dpa_offset < vmr_size + pmr_size) { |
| as = &ct3d->hostpmem_as; |
| dpa_offset -= vmr_size; |
| } else { |
| as = &ct3d->dc.host_dc_as; |
| dpa_offset -= (vmr_size + pmr_size); |
| } |
| |
| address_space_write(as, dpa_offset, MEMTXATTRS_UNSPECIFIED, data, |
| CXL_CACHE_LINE_SIZE); |
| return true; |
| } |
| |
| void cxl_set_poison_list_overflowed(CXLType3Dev *ct3d) |
| { |
| ct3d->poison_list_overflowed = true; |
| ct3d->poison_list_overflow_ts = |
| cxl_device_get_timestamp(&ct3d->cxl_dstate); |
| } |
| |
| void cxl_clear_poison_list_overflowed(CXLType3Dev *ct3d) |
| { |
| ct3d->poison_list_overflowed = false; |
| ct3d->poison_list_overflow_ts = 0; |
| } |
| |
| void qmp_cxl_inject_poison(const char *path, uint64_t start, uint64_t length, |
| Error **errp) |
| { |
| Object *obj = object_resolve_path(path, NULL); |
| CXLType3Dev *ct3d; |
| CXLPoison *p; |
| |
| if (length % 64) { |
| error_setg(errp, "Poison injection must be in multiples of 64 bytes"); |
| return; |
| } |
| if (start % 64) { |
| error_setg(errp, "Poison start address must be 64 byte aligned"); |
| return; |
| } |
| if (!obj) { |
| error_setg(errp, "Unable to resolve path"); |
| return; |
| } |
| if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) { |
| error_setg(errp, "Path does not point to a CXL type 3 device"); |
| return; |
| } |
| |
| ct3d = CXL_TYPE3(obj); |
| |
| QLIST_FOREACH(p, &ct3d->poison_list, node) { |
| if (((start >= p->start) && (start < p->start + p->length)) || |
| ((start + length > p->start) && |
| (start + length <= p->start + p->length))) { |
| error_setg(errp, |
| "Overlap with existing poisoned region not supported"); |
| return; |
| } |
| } |
| |
| p = g_new0(CXLPoison, 1); |
| p->length = length; |
| p->start = start; |
| /* Different from injected via the mbox */ |
| p->type = CXL_POISON_TYPE_INTERNAL; |
| |
| if (ct3d->poison_list_cnt < CXL_POISON_LIST_LIMIT) { |
| QLIST_INSERT_HEAD(&ct3d->poison_list, p, node); |
| ct3d->poison_list_cnt++; |
| } else { |
| if (!ct3d->poison_list_overflowed) { |
| cxl_set_poison_list_overflowed(ct3d); |
| } |
| QLIST_INSERT_HEAD(&ct3d->poison_list_bkp, p, node); |
| } |
| } |
| |
| /* For uncorrectable errors include support for multiple header recording */ |
| void qmp_cxl_inject_uncorrectable_errors(const char *path, |
| CXLUncorErrorRecordList *errors, |
| Error **errp) |
| { |
| Object *obj = object_resolve_path(path, NULL); |
| static PCIEAERErr err = {}; |
| CXLType3Dev *ct3d; |
| CXLError *cxl_err; |
| uint32_t *reg_state; |
| uint32_t unc_err; |
| bool first; |
| |
| if (!obj) { |
| error_setg(errp, "Unable to resolve path"); |
| return; |
| } |
| |
| if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) { |
| error_setg(errp, "Path does not point to a CXL type 3 device"); |
| return; |
| } |
| |
| err.status = PCI_ERR_UNC_INTN; |
| err.source_id = pci_requester_id(PCI_DEVICE(obj)); |
| err.flags = 0; |
| |
| ct3d = CXL_TYPE3(obj); |
| |
| first = QTAILQ_EMPTY(&ct3d->error_list); |
| reg_state = ct3d->cxl_cstate.crb.cache_mem_registers; |
| while (errors) { |
| uint32List *header = errors->value->header; |
| uint8_t header_count = 0; |
| int cxl_err_code; |
| |
| cxl_err_code = ct3d_qmp_uncor_err_to_cxl(errors->value->type); |
| if (cxl_err_code < 0) { |
| error_setg(errp, "Unknown error code"); |
| return; |
| } |
| |
| /* If the error is masked, nothing to do here */ |
| if (!((1 << cxl_err_code) & |
| ~ldl_le_p(reg_state + R_CXL_RAS_UNC_ERR_MASK))) { |
| errors = errors->next; |
| continue; |
| } |
| |
| cxl_err = g_malloc0(sizeof(*cxl_err)); |
| |
| cxl_err->type = cxl_err_code; |
| while (header && header_count < 32) { |
| cxl_err->header[header_count++] = header->value; |
| header = header->next; |
| } |
| if (header_count > 32) { |
| error_setg(errp, "Header must be 32 DWORD or less"); |
| return; |
| } |
| QTAILQ_INSERT_TAIL(&ct3d->error_list, cxl_err, node); |
| |
| errors = errors->next; |
| } |
| |
| if (first && !QTAILQ_EMPTY(&ct3d->error_list)) { |
| uint32_t *cache_mem = ct3d->cxl_cstate.crb.cache_mem_registers; |
| uint32_t capctrl = ldl_le_p(cache_mem + R_CXL_RAS_ERR_CAP_CTRL); |
| uint32_t *header_log = &cache_mem[R_CXL_RAS_ERR_HEADER0]; |
| int i; |
| |
| cxl_err = QTAILQ_FIRST(&ct3d->error_list); |
| for (i = 0; i < CXL_RAS_ERR_HEADER_NUM; i++) { |
| stl_le_p(header_log + i, cxl_err->header[i]); |
| } |
| |
| capctrl = FIELD_DP32(capctrl, CXL_RAS_ERR_CAP_CTRL, |
| FIRST_ERROR_POINTER, cxl_err->type); |
| stl_le_p(cache_mem + R_CXL_RAS_ERR_CAP_CTRL, capctrl); |
| } |
| |
| unc_err = 0; |
| QTAILQ_FOREACH(cxl_err, &ct3d->error_list, node) { |
| unc_err |= (1 << cxl_err->type); |
| } |
| if (!unc_err) { |
| return; |
| } |
| |
| stl_le_p(reg_state + R_CXL_RAS_UNC_ERR_STATUS, unc_err); |
| pcie_aer_inject_error(PCI_DEVICE(obj), &err); |
| |
| return; |
| } |
| |
| void qmp_cxl_inject_correctable_error(const char *path, CxlCorErrorType type, |
| Error **errp) |
| { |
| static PCIEAERErr err = {}; |
| Object *obj = object_resolve_path(path, NULL); |
| CXLType3Dev *ct3d; |
| uint32_t *reg_state; |
| uint32_t cor_err; |
| int cxl_err_type; |
| |
| if (!obj) { |
| error_setg(errp, "Unable to resolve path"); |
| return; |
| } |
| if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) { |
| error_setg(errp, "Path does not point to a CXL type 3 device"); |
| return; |
| } |
| |
| err.status = PCI_ERR_COR_INTERNAL; |
| err.source_id = pci_requester_id(PCI_DEVICE(obj)); |
| err.flags = PCIE_AER_ERR_IS_CORRECTABLE; |
| |
| ct3d = CXL_TYPE3(obj); |
| reg_state = ct3d->cxl_cstate.crb.cache_mem_registers; |
| cor_err = ldl_le_p(reg_state + R_CXL_RAS_COR_ERR_STATUS); |
| |
| cxl_err_type = ct3d_qmp_cor_err_to_cxl(type); |
| if (cxl_err_type < 0) { |
| error_setg(errp, "Invalid COR error"); |
| return; |
| } |
| /* If the error is masked, nothting to do here */ |
| if (!((1 << cxl_err_type) & |
| ~ldl_le_p(reg_state + R_CXL_RAS_COR_ERR_MASK))) { |
| return; |
| } |
| |
| cor_err |= (1 << cxl_err_type); |
| stl_le_p(reg_state + R_CXL_RAS_COR_ERR_STATUS, cor_err); |
| |
| pcie_aer_inject_error(PCI_DEVICE(obj), &err); |
| } |
| |
| static void cxl_assign_event_header(CXLEventRecordHdr *hdr, |
| const QemuUUID *uuid, uint32_t flags, |
| uint8_t length, uint64_t timestamp) |
| { |
| st24_le_p(&hdr->flags, flags); |
| hdr->length = length; |
| memcpy(&hdr->id, uuid, sizeof(hdr->id)); |
| stq_le_p(&hdr->timestamp, timestamp); |
| } |
| |
| static const QemuUUID gen_media_uuid = { |
| .data = UUID(0xfbcd0a77, 0xc260, 0x417f, |
| 0x85, 0xa9, 0x08, 0x8b, 0x16, 0x21, 0xeb, 0xa6), |
| }; |
| |
| static const QemuUUID dram_uuid = { |
| .data = UUID(0x601dcbb3, 0x9c06, 0x4eab, 0xb8, 0xaf, |
| 0x4e, 0x9b, 0xfb, 0x5c, 0x96, 0x24), |
| }; |
| |
| static const QemuUUID memory_module_uuid = { |
| .data = UUID(0xfe927475, 0xdd59, 0x4339, 0xa5, 0x86, |
| 0x79, 0xba, 0xb1, 0x13, 0xb7, 0x74), |
| }; |
| |
| #define CXL_GMER_VALID_CHANNEL BIT(0) |
| #define CXL_GMER_VALID_RANK BIT(1) |
| #define CXL_GMER_VALID_DEVICE BIT(2) |
| #define CXL_GMER_VALID_COMPONENT BIT(3) |
| |
| static int ct3d_qmp_cxl_event_log_enc(CxlEventLog log) |
| { |
| switch (log) { |
| case CXL_EVENT_LOG_INFORMATIONAL: |
| return CXL_EVENT_TYPE_INFO; |
| case CXL_EVENT_LOG_WARNING: |
| return CXL_EVENT_TYPE_WARN; |
| case CXL_EVENT_LOG_FAILURE: |
| return CXL_EVENT_TYPE_FAIL; |
| case CXL_EVENT_LOG_FATAL: |
| return CXL_EVENT_TYPE_FATAL; |
| default: |
| return -EINVAL; |
| } |
| } |
| /* Component ID is device specific. Define this as a string. */ |
| void qmp_cxl_inject_general_media_event(const char *path, CxlEventLog log, |
| uint8_t flags, uint64_t dpa, |
| uint8_t descriptor, uint8_t type, |
| uint8_t transaction_type, |
| bool has_channel, uint8_t channel, |
| bool has_rank, uint8_t rank, |
| bool has_device, uint32_t device, |
| const char *component_id, |
| Error **errp) |
| { |
| Object *obj = object_resolve_path(path, NULL); |
| CXLEventGenMedia gem; |
| CXLEventRecordHdr *hdr = &gem.hdr; |
| CXLDeviceState *cxlds; |
| CXLType3Dev *ct3d; |
| uint16_t valid_flags = 0; |
| uint8_t enc_log; |
| int rc; |
| |
| if (!obj) { |
| error_setg(errp, "Unable to resolve path"); |
| return; |
| } |
| if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) { |
| error_setg(errp, "Path does not point to a CXL type 3 device"); |
| return; |
| } |
| ct3d = CXL_TYPE3(obj); |
| cxlds = &ct3d->cxl_dstate; |
| |
| rc = ct3d_qmp_cxl_event_log_enc(log); |
| if (rc < 0) { |
| error_setg(errp, "Unhandled error log type"); |
| return; |
| } |
| enc_log = rc; |
| |
| memset(&gem, 0, sizeof(gem)); |
| cxl_assign_event_header(hdr, &gen_media_uuid, flags, sizeof(gem), |
| cxl_device_get_timestamp(&ct3d->cxl_dstate)); |
| |
| stq_le_p(&gem.phys_addr, dpa); |
| gem.descriptor = descriptor; |
| gem.type = type; |
| gem.transaction_type = transaction_type; |
| |
| if (has_channel) { |
| gem.channel = channel; |
| valid_flags |= CXL_GMER_VALID_CHANNEL; |
| } |
| |
| if (has_rank) { |
| gem.rank = rank; |
| valid_flags |= CXL_GMER_VALID_RANK; |
| } |
| |
| if (has_device) { |
| st24_le_p(gem.device, device); |
| valid_flags |= CXL_GMER_VALID_DEVICE; |
| } |
| |
| if (component_id) { |
| strncpy((char *)gem.component_id, component_id, |
| sizeof(gem.component_id) - 1); |
| valid_flags |= CXL_GMER_VALID_COMPONENT; |
| } |
| |
| stw_le_p(&gem.validity_flags, valid_flags); |
| |
| if (cxl_event_insert(cxlds, enc_log, (CXLEventRecordRaw *)&gem)) { |
| cxl_event_irq_assert(ct3d); |
| } |
| } |
| |
| #define CXL_DRAM_VALID_CHANNEL BIT(0) |
| #define CXL_DRAM_VALID_RANK BIT(1) |
| #define CXL_DRAM_VALID_NIBBLE_MASK BIT(2) |
| #define CXL_DRAM_VALID_BANK_GROUP BIT(3) |
| #define CXL_DRAM_VALID_BANK BIT(4) |
| #define CXL_DRAM_VALID_ROW BIT(5) |
| #define CXL_DRAM_VALID_COLUMN BIT(6) |
| #define CXL_DRAM_VALID_CORRECTION_MASK BIT(7) |
| |
| void qmp_cxl_inject_dram_event(const char *path, CxlEventLog log, uint8_t flags, |
| uint64_t dpa, uint8_t descriptor, |
| uint8_t type, uint8_t transaction_type, |
| bool has_channel, uint8_t channel, |
| bool has_rank, uint8_t rank, |
| bool has_nibble_mask, uint32_t nibble_mask, |
| bool has_bank_group, uint8_t bank_group, |
| bool has_bank, uint8_t bank, |
| bool has_row, uint32_t row, |
| bool has_column, uint16_t column, |
| bool has_correction_mask, |
| uint64List *correction_mask, |
| Error **errp) |
| { |
| Object *obj = object_resolve_path(path, NULL); |
| CXLEventDram dram; |
| CXLEventRecordHdr *hdr = &dram.hdr; |
| CXLDeviceState *cxlds; |
| CXLType3Dev *ct3d; |
| uint16_t valid_flags = 0; |
| uint8_t enc_log; |
| int rc; |
| |
| if (!obj) { |
| error_setg(errp, "Unable to resolve path"); |
| return; |
| } |
| if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) { |
| error_setg(errp, "Path does not point to a CXL type 3 device"); |
| return; |
| } |
| ct3d = CXL_TYPE3(obj); |
| cxlds = &ct3d->cxl_dstate; |
| |
| rc = ct3d_qmp_cxl_event_log_enc(log); |
| if (rc < 0) { |
| error_setg(errp, "Unhandled error log type"); |
| return; |
| } |
| enc_log = rc; |
| |
| memset(&dram, 0, sizeof(dram)); |
| cxl_assign_event_header(hdr, &dram_uuid, flags, sizeof(dram), |
| cxl_device_get_timestamp(&ct3d->cxl_dstate)); |
| stq_le_p(&dram.phys_addr, dpa); |
| dram.descriptor = descriptor; |
| dram.type = type; |
| dram.transaction_type = transaction_type; |
| |
| if (has_channel) { |
| dram.channel = channel; |
| valid_flags |= CXL_DRAM_VALID_CHANNEL; |
| } |
| |
| if (has_rank) { |
| dram.rank = rank; |
| valid_flags |= CXL_DRAM_VALID_RANK; |
| } |
| |
| if (has_nibble_mask) { |
| st24_le_p(dram.nibble_mask, nibble_mask); |
| valid_flags |= CXL_DRAM_VALID_NIBBLE_MASK; |
| } |
| |
| if (has_bank_group) { |
| dram.bank_group = bank_group; |
| valid_flags |= CXL_DRAM_VALID_BANK_GROUP; |
| } |
| |
| if (has_bank) { |
| dram.bank = bank; |
| valid_flags |= CXL_DRAM_VALID_BANK; |
| } |
| |
| if (has_row) { |
| st24_le_p(dram.row, row); |
| valid_flags |= CXL_DRAM_VALID_ROW; |
| } |
| |
| if (has_column) { |
| stw_le_p(&dram.column, column); |
| valid_flags |= CXL_DRAM_VALID_COLUMN; |
| } |
| |
| if (has_correction_mask) { |
| int count = 0; |
| while (correction_mask && count < 4) { |
| stq_le_p(&dram.correction_mask[count], |
| correction_mask->value); |
| count++; |
| correction_mask = correction_mask->next; |
| } |
| valid_flags |= CXL_DRAM_VALID_CORRECTION_MASK; |
| } |
| |
| stw_le_p(&dram.validity_flags, valid_flags); |
| |
| if (cxl_event_insert(cxlds, enc_log, (CXLEventRecordRaw *)&dram)) { |
| cxl_event_irq_assert(ct3d); |
| } |
| return; |
| } |
| |
| void qmp_cxl_inject_memory_module_event(const char *path, CxlEventLog log, |
| uint8_t flags, uint8_t type, |
| uint8_t health_status, |
| uint8_t media_status, |
| uint8_t additional_status, |
| uint8_t life_used, |
| int16_t temperature, |
| uint32_t dirty_shutdown_count, |
| uint32_t corrected_volatile_error_count, |
| uint32_t corrected_persist_error_count, |
| Error **errp) |
| { |
| Object *obj = object_resolve_path(path, NULL); |
| CXLEventMemoryModule module; |
| CXLEventRecordHdr *hdr = &module.hdr; |
| CXLDeviceState *cxlds; |
| CXLType3Dev *ct3d; |
| uint8_t enc_log; |
| int rc; |
| |
| if (!obj) { |
| error_setg(errp, "Unable to resolve path"); |
| return; |
| } |
| if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) { |
| error_setg(errp, "Path does not point to a CXL type 3 device"); |
| return; |
| } |
| ct3d = CXL_TYPE3(obj); |
| cxlds = &ct3d->cxl_dstate; |
| |
| rc = ct3d_qmp_cxl_event_log_enc(log); |
| if (rc < 0) { |
| error_setg(errp, "Unhandled error log type"); |
| return; |
| } |
| enc_log = rc; |
| |
| memset(&module, 0, sizeof(module)); |
| cxl_assign_event_header(hdr, &memory_module_uuid, flags, sizeof(module), |
| cxl_device_get_timestamp(&ct3d->cxl_dstate)); |
| |
| module.type = type; |
| module.health_status = health_status; |
| module.media_status = media_status; |
| module.additional_status = additional_status; |
| module.life_used = life_used; |
| stw_le_p(&module.temperature, temperature); |
| stl_le_p(&module.dirty_shutdown_count, dirty_shutdown_count); |
| stl_le_p(&module.corrected_volatile_error_count, |
| corrected_volatile_error_count); |
| stl_le_p(&module.corrected_persistent_error_count, |
| corrected_persist_error_count); |
| |
| if (cxl_event_insert(cxlds, enc_log, (CXLEventRecordRaw *)&module)) { |
| cxl_event_irq_assert(ct3d); |
| } |
| } |
| |
| /* CXL r3.1 Table 8-50: Dynamic Capacity Event Record */ |
| static const QemuUUID dynamic_capacity_uuid = { |
| .data = UUID(0xca95afa7, 0xf183, 0x4018, 0x8c, 0x2f, |
| 0x95, 0x26, 0x8e, 0x10, 0x1a, 0x2a), |
| }; |
| |
| typedef enum CXLDCEventType { |
| DC_EVENT_ADD_CAPACITY = 0x0, |
| DC_EVENT_RELEASE_CAPACITY = 0x1, |
| DC_EVENT_FORCED_RELEASE_CAPACITY = 0x2, |
| DC_EVENT_REGION_CONFIG_UPDATED = 0x3, |
| DC_EVENT_ADD_CAPACITY_RSP = 0x4, |
| DC_EVENT_CAPACITY_RELEASED = 0x5, |
| } CXLDCEventType; |
| |
| /* |
| * Check whether the range [dpa, dpa + len - 1] has overlaps with extents in |
| * the list. |
| * Return value: return true if has overlaps; otherwise, return false |
| */ |
| static bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list, |
| uint64_t dpa, uint64_t len) |
| { |
| CXLDCExtent *ent; |
| Range range1, range2; |
| |
| if (!list) { |
| return false; |
| } |
| |
| range_init_nofail(&range1, dpa, len); |
| QTAILQ_FOREACH(ent, list, node) { |
| range_init_nofail(&range2, ent->start_dpa, ent->len); |
| if (range_overlaps_range(&range1, &range2)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /* |
| * Check whether the range [dpa, dpa + len - 1] is contained by extents in |
| * the list. |
| * Will check multiple extents containment once superset release is added. |
| * Return value: return true if range is contained; otherwise, return false |
| */ |
| bool cxl_extents_contains_dpa_range(CXLDCExtentList *list, |
| uint64_t dpa, uint64_t len) |
| { |
| CXLDCExtent *ent; |
| Range range1, range2; |
| |
| if (!list) { |
| return false; |
| } |
| |
| range_init_nofail(&range1, dpa, len); |
| QTAILQ_FOREACH(ent, list, node) { |
| range_init_nofail(&range2, ent->start_dpa, ent->len); |
| if (range_contains_range(&range2, &range1)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list, |
| uint64_t dpa, uint64_t len) |
| { |
| CXLDCExtentGroup *group; |
| |
| if (!list) { |
| return false; |
| } |
| |
| QTAILQ_FOREACH(group, list, node) { |
| if (cxl_extents_overlaps_dpa_range(&group->list, dpa, len)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /* |
| * The main function to process dynamic capacity event with extent list. |
| * Currently DC extents add/release requests are processed. |
| */ |
| static void qmp_cxl_process_dynamic_capacity_prescriptive(const char *path, |
| uint16_t hid, CXLDCEventType type, uint8_t rid, |
| CxlDynamicCapacityExtentList *records, Error **errp) |
| { |
| Object *obj; |
| CXLEventDynamicCapacity dCap = {}; |
| CXLEventRecordHdr *hdr = &dCap.hdr; |
| CXLType3Dev *dcd; |
| uint8_t flags = 1 << CXL_EVENT_TYPE_INFO; |
| uint32_t num_extents = 0; |
| CxlDynamicCapacityExtentList *list; |
| CXLDCExtentGroup *group = NULL; |
| g_autofree CXLDCExtentRaw *extents = NULL; |
| uint8_t enc_log = CXL_EVENT_TYPE_DYNAMIC_CAP; |
| uint64_t dpa, offset, len, block_size; |
| g_autofree unsigned long *blk_bitmap = NULL; |
| int i; |
| |
| obj = object_resolve_path_type(path, TYPE_CXL_TYPE3, NULL); |
| if (!obj) { |
| error_setg(errp, "Unable to resolve CXL type 3 device"); |
| return; |
| } |
| |
| dcd = CXL_TYPE3(obj); |
| if (!dcd->dc.num_regions) { |
| error_setg(errp, "No dynamic capacity support from the device"); |
| return; |
| } |
| |
| |
| if (rid >= dcd->dc.num_regions) { |
| error_setg(errp, "region id is too large"); |
| return; |
| } |
| block_size = dcd->dc.regions[rid].block_size; |
| blk_bitmap = bitmap_new(dcd->dc.regions[rid].len / block_size); |
| |
| /* Sanity check and count the extents */ |
| list = records; |
| while (list) { |
| offset = list->value->offset; |
| len = list->value->len; |
| dpa = offset + dcd->dc.regions[rid].base; |
| |
| if (len == 0) { |
| error_setg(errp, "extent with 0 length is not allowed"); |
| return; |
| } |
| |
| if (offset % block_size || len % block_size) { |
| error_setg(errp, "dpa or len is not aligned to region block size"); |
| return; |
| } |
| |
| if (offset + len > dcd->dc.regions[rid].len) { |
| error_setg(errp, "extent range is beyond the region end"); |
| return; |
| } |
| |
| /* No duplicate or overlapped extents are allowed */ |
| if (test_any_bits_set(blk_bitmap, offset / block_size, |
| len / block_size)) { |
| error_setg(errp, "duplicate or overlapped extents are detected"); |
| return; |
| } |
| bitmap_set(blk_bitmap, offset / block_size, len / block_size); |
| |
| if (type == DC_EVENT_RELEASE_CAPACITY) { |
| if (cxl_extent_groups_overlaps_dpa_range(&dcd->dc.extents_pending, |
| dpa, len)) { |
| error_setg(errp, |
| "cannot release extent with pending DPA range"); |
| return; |
| } |
| if (!ct3_test_region_block_backed(dcd, dpa, len)) { |
| error_setg(errp, |
| "cannot release extent with non-existing DPA range"); |
| return; |
| } |
| } else if (type == DC_EVENT_ADD_CAPACITY) { |
| if (cxl_extents_overlaps_dpa_range(&dcd->dc.extents, dpa, len)) { |
| error_setg(errp, |
| "cannot add DPA already accessible to the same LD"); |
| return; |
| } |
| if (cxl_extent_groups_overlaps_dpa_range(&dcd->dc.extents_pending, |
| dpa, len)) { |
| error_setg(errp, |
| "cannot add DPA again while still pending"); |
| return; |
| } |
| } |
| list = list->next; |
| num_extents++; |
| } |
| |
| /* Create extent list for event being passed to host */ |
| i = 0; |
| list = records; |
| extents = g_new0(CXLDCExtentRaw, num_extents); |
| while (list) { |
| offset = list->value->offset; |
| len = list->value->len; |
| dpa = dcd->dc.regions[rid].base + offset; |
| |
| extents[i].start_dpa = dpa; |
| extents[i].len = len; |
| memset(extents[i].tag, 0, 0x10); |
| extents[i].shared_seq = 0; |
| if (type == DC_EVENT_ADD_CAPACITY) { |
| group = cxl_insert_extent_to_extent_group(group, |
| extents[i].start_dpa, |
| extents[i].len, |
| extents[i].tag, |
| extents[i].shared_seq); |
| } |
| |
| list = list->next; |
| i++; |
| } |
| if (group) { |
| cxl_extent_group_list_insert_tail(&dcd->dc.extents_pending, group); |
| } |
| |
| /* |
| * CXL r3.1 section 8.2.9.2.1.6: Dynamic Capacity Event Record |
| * |
| * All Dynamic Capacity event records shall set the Event Record Severity |
| * field in the Common Event Record Format to Informational Event. All |
| * Dynamic Capacity related events shall be logged in the Dynamic Capacity |
| * Event Log. |
| */ |
| cxl_assign_event_header(hdr, &dynamic_capacity_uuid, flags, sizeof(dCap), |
| cxl_device_get_timestamp(&dcd->cxl_dstate)); |
| |
| dCap.type = type; |
| /* FIXME: for now, validity flag is cleared */ |
| dCap.validity_flags = 0; |
| stw_le_p(&dCap.host_id, hid); |
| /* only valid for DC_REGION_CONFIG_UPDATED event */ |
| dCap.updated_region_id = 0; |
| dCap.flags = 0; |
| for (i = 0; i < num_extents; i++) { |
| memcpy(&dCap.dynamic_capacity_extent, &extents[i], |
| sizeof(CXLDCExtentRaw)); |
| |
| if (i < num_extents - 1) { |
| /* Set "More" flag */ |
| dCap.flags |= BIT(0); |
| } |
| |
| if (cxl_event_insert(&dcd->cxl_dstate, enc_log, |
| (CXLEventRecordRaw *)&dCap)) { |
| cxl_event_irq_assert(dcd); |
| } |
| } |
| } |
| |
| void qmp_cxl_add_dynamic_capacity(const char *path, uint16_t host_id, |
| CxlExtentSelectionPolicy sel_policy, |
| uint8_t region, const char *tag, |
| CxlDynamicCapacityExtentList *extents, |
| Error **errp) |
| { |
| switch (sel_policy) { |
| case CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE: |
| qmp_cxl_process_dynamic_capacity_prescriptive(path, host_id, |
| DC_EVENT_ADD_CAPACITY, |
| region, extents, errp); |
| return; |
| default: |
| error_setg(errp, "Selection policy not supported"); |
| return; |
| } |
| } |
| |
| void qmp_cxl_release_dynamic_capacity(const char *path, uint16_t host_id, |
| CxlExtentRemovalPolicy removal_policy, |
| bool has_forced_removal, |
| bool forced_removal, |
| bool has_sanitize_on_release, |
| bool sanitize_on_release, |
| uint8_t region, |
| const char *tag, |
| CxlDynamicCapacityExtentList *extents, |
| Error **errp) |
| { |
| CXLDCEventType type = DC_EVENT_RELEASE_CAPACITY; |
| |
| if (has_forced_removal && forced_removal) { |
| /* TODO: enable forced removal in the future */ |
| type = DC_EVENT_FORCED_RELEASE_CAPACITY; |
| error_setg(errp, "Forced removal not supported yet"); |
| return; |
| } |
| |
| switch (removal_policy) { |
| case CXL_EXTENT_REMOVAL_POLICY_PRESCRIPTIVE: |
| qmp_cxl_process_dynamic_capacity_prescriptive(path, host_id, type, |
| region, extents, errp); |
| return; |
| default: |
| error_setg(errp, "Removal policy not supported"); |
| return; |
| } |
| } |
| |
| static void ct3_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc); |
| CXLType3Class *cvc = CXL_TYPE3_CLASS(oc); |
| |
| pc->realize = ct3_realize; |
| pc->exit = ct3_exit; |
| pc->class_id = PCI_CLASS_MEMORY_CXL; |
| pc->vendor_id = PCI_VENDOR_ID_INTEL; |
| pc->device_id = 0xd93; /* LVF for now */ |
| pc->revision = 1; |
| |
| pc->config_write = ct3d_config_write; |
| pc->config_read = ct3d_config_read; |
| |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| dc->desc = "CXL Memory Device (Type 3)"; |
| device_class_set_legacy_reset(dc, ct3d_reset); |
| device_class_set_props(dc, ct3_props); |
| |
| cvc->get_lsa_size = get_lsa_size; |
| cvc->get_lsa = get_lsa; |
| cvc->set_lsa = set_lsa; |
| cvc->set_cacheline = set_cacheline; |
| } |
| |
| static const TypeInfo ct3d_info = { |
| .name = TYPE_CXL_TYPE3, |
| .parent = TYPE_PCI_DEVICE, |
| .class_size = sizeof(struct CXLType3Class), |
| .class_init = ct3_class_init, |
| .instance_size = sizeof(CXLType3Dev), |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CXL_DEVICE }, |
| { INTERFACE_PCIE_DEVICE }, |
| {} |
| }, |
| }; |
| |
| static void ct3d_registers(void) |
| { |
| type_register_static(&ct3d_info); |
| } |
| |
| type_init(ct3d_registers); |