| /* |
| * Floppy test cases. |
| * |
| * Copyright (c) 2012 Kevin Wolf <kwolf@redhat.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| |
| |
| #include "libqtest-single.h" |
| #include "qapi/qmp/qdict.h" |
| |
| #define DRIVE_FLOPPY_BLANK \ |
| "-drive if=floppy,file=null-co://,file.read-zeroes=on,format=raw,size=1440k" |
| |
| #define TEST_IMAGE_SIZE 1440 * 1024 |
| |
| #define FLOPPY_BASE 0x3f0 |
| #define FLOPPY_IRQ 6 |
| |
| enum { |
| reg_sra = 0x0, |
| reg_srb = 0x1, |
| reg_dor = 0x2, |
| reg_msr = 0x4, |
| reg_dsr = 0x4, |
| reg_fifo = 0x5, |
| reg_dir = 0x7, |
| }; |
| |
| enum { |
| CMD_SENSE_INT = 0x08, |
| CMD_READ_ID = 0x0a, |
| CMD_SEEK = 0x0f, |
| CMD_VERIFY = 0x16, |
| CMD_READ = 0xe6, |
| CMD_RELATIVE_SEEK_OUT = 0x8f, |
| CMD_RELATIVE_SEEK_IN = 0xcf, |
| }; |
| |
| enum { |
| BUSY = 0x10, |
| NONDMA = 0x20, |
| RQM = 0x80, |
| DIO = 0x40, |
| |
| DSKCHG = 0x80, |
| }; |
| |
| static char *test_image; |
| |
| #define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask)) |
| #define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0) |
| |
| static uint8_t base = 0x70; |
| |
| enum { |
| CMOS_FLOPPY = 0x10, |
| }; |
| |
| static void floppy_send(uint8_t byte) |
| { |
| uint8_t msr; |
| |
| msr = inb(FLOPPY_BASE + reg_msr); |
| assert_bit_set(msr, RQM); |
| assert_bit_clear(msr, DIO); |
| |
| outb(FLOPPY_BASE + reg_fifo, byte); |
| } |
| |
| static uint8_t floppy_recv(void) |
| { |
| uint8_t msr; |
| |
| msr = inb(FLOPPY_BASE + reg_msr); |
| assert_bit_set(msr, RQM | DIO); |
| |
| return inb(FLOPPY_BASE + reg_fifo); |
| } |
| |
| /* pcn: Present Cylinder Number */ |
| static void ack_irq(uint8_t *pcn) |
| { |
| uint8_t ret; |
| |
| g_assert(get_irq(FLOPPY_IRQ)); |
| floppy_send(CMD_SENSE_INT); |
| floppy_recv(); |
| |
| ret = floppy_recv(); |
| if (pcn != NULL) { |
| *pcn = ret; |
| } |
| |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| } |
| |
| static uint8_t send_read_command(uint8_t cmd) |
| { |
| uint8_t drive = 0; |
| uint8_t head = 0; |
| uint8_t cyl = 0; |
| uint8_t sect_addr = 1; |
| uint8_t sect_size = 2; |
| uint8_t eot = 1; |
| uint8_t gap = 0x1b; |
| uint8_t gpl = 0xff; |
| |
| uint8_t msr = 0; |
| uint8_t st0; |
| |
| uint8_t ret = 0; |
| |
| floppy_send(cmd); |
| floppy_send(head << 2 | drive); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(cyl); |
| floppy_send(head); |
| floppy_send(sect_addr); |
| floppy_send(sect_size); |
| floppy_send(eot); |
| floppy_send(gap); |
| floppy_send(gpl); |
| |
| uint8_t i = 0; |
| uint8_t n = 2; |
| for (; i < n; i++) { |
| msr = inb(FLOPPY_BASE + reg_msr); |
| if (msr == 0xd0) { |
| break; |
| } |
| sleep(1); |
| } |
| |
| if (i >= n) { |
| return 1; |
| } |
| |
| st0 = floppy_recv(); |
| if (st0 != 0x40) { |
| ret = 1; |
| } |
| |
| floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| |
| return ret; |
| } |
| |
| static uint8_t send_read_no_dma_command(int nb_sect, uint8_t expected_st0) |
| { |
| uint8_t drive = 0; |
| uint8_t head = 0; |
| uint8_t cyl = 0; |
| uint8_t sect_addr = 1; |
| uint8_t sect_size = 2; |
| uint8_t eot = nb_sect; |
| uint8_t gap = 0x1b; |
| uint8_t gpl = 0xff; |
| |
| uint8_t msr = 0; |
| uint8_t st0; |
| |
| uint8_t ret = 0; |
| |
| floppy_send(CMD_READ); |
| floppy_send(head << 2 | drive); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(cyl); |
| floppy_send(head); |
| floppy_send(sect_addr); |
| floppy_send(sect_size); |
| floppy_send(eot); |
| floppy_send(gap); |
| floppy_send(gpl); |
| |
| uint16_t i = 0; |
| uint8_t n = 2; |
| for (; i < n; i++) { |
| msr = inb(FLOPPY_BASE + reg_msr); |
| if (msr == (BUSY | NONDMA | DIO | RQM)) { |
| break; |
| } |
| sleep(1); |
| } |
| |
| if (i >= n) { |
| return 1; |
| } |
| |
| /* Non-DMA mode */ |
| for (i = 0; i < 512 * 2 * nb_sect; i++) { |
| msr = inb(FLOPPY_BASE + reg_msr); |
| assert_bit_set(msr, BUSY | RQM | DIO); |
| inb(FLOPPY_BASE + reg_fifo); |
| } |
| |
| msr = inb(FLOPPY_BASE + reg_msr); |
| assert_bit_set(msr, BUSY | RQM | DIO); |
| g_assert(get_irq(FLOPPY_IRQ)); |
| |
| st0 = floppy_recv(); |
| if (st0 != expected_st0) { |
| ret = 1; |
| } |
| |
| floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| g_assert(get_irq(FLOPPY_IRQ)); |
| floppy_recv(); |
| |
| /* Check that we're back in command phase */ |
| msr = inb(FLOPPY_BASE + reg_msr); |
| assert_bit_clear(msr, BUSY | DIO); |
| assert_bit_set(msr, RQM); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| |
| return ret; |
| } |
| |
| static void send_seek(int cyl) |
| { |
| int drive = 0; |
| int head = 0; |
| |
| floppy_send(CMD_SEEK); |
| floppy_send(head << 2 | drive); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(cyl); |
| ack_irq(NULL); |
| } |
| |
| static uint8_t cmos_read(uint8_t reg) |
| { |
| outb(base + 0, reg); |
| return inb(base + 1); |
| } |
| |
| static void test_cmos(void) |
| { |
| uint8_t cmos; |
| |
| cmos = cmos_read(CMOS_FLOPPY); |
| g_assert(cmos == 0x40 || cmos == 0x50); |
| } |
| |
| static void test_no_media_on_start(void) |
| { |
| uint8_t dir; |
| |
| /* Media changed bit must be set all time after start if there is |
| * no media in drive. */ |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| send_seek(1); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| } |
| |
| static void test_read_without_media(void) |
| { |
| uint8_t ret; |
| |
| ret = send_read_command(CMD_READ); |
| g_assert(ret == 0); |
| } |
| |
| static void test_media_insert(void) |
| { |
| uint8_t dir; |
| |
| /* Insert media in drive. DSKCHK should not be reset until a step pulse |
| * is sent. */ |
| qtest_qmp_assert_success(global_qtest, |
| "{'execute':'blockdev-change-medium', 'arguments':{" |
| " 'id':'floppy0', 'filename': %s, 'format': 'raw' }}", |
| test_image); |
| |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| |
| send_seek(0); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| |
| /* Step to next track should clear DSKCHG bit. */ |
| send_seek(1); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_clear(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_clear(dir, DSKCHG); |
| } |
| |
| static void test_media_change(void) |
| { |
| uint8_t dir; |
| |
| test_media_insert(); |
| |
| /* Eject the floppy and check that DSKCHG is set. Reading it out doesn't |
| * reset the bit. */ |
| qtest_qmp_assert_success(global_qtest, |
| "{'execute':'eject', 'arguments':{" |
| " 'id':'floppy0' }}"); |
| |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| |
| send_seek(0); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| |
| send_seek(1); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| dir = inb(FLOPPY_BASE + reg_dir); |
| assert_bit_set(dir, DSKCHG); |
| } |
| |
| static void test_sense_interrupt(void) |
| { |
| int drive = 0; |
| int head = 0; |
| int cyl = 0; |
| int ret = 0; |
| |
| floppy_send(CMD_SENSE_INT); |
| ret = floppy_recv(); |
| g_assert(ret == 0x80); |
| |
| floppy_send(CMD_SEEK); |
| floppy_send(head << 2 | drive); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(cyl); |
| |
| floppy_send(CMD_SENSE_INT); |
| ret = floppy_recv(); |
| g_assert(ret == 0x20); |
| floppy_recv(); |
| } |
| |
| static void test_relative_seek(void) |
| { |
| uint8_t drive = 0; |
| uint8_t head = 0; |
| uint8_t cyl = 1; |
| uint8_t pcn; |
| |
| /* Send seek to track 0 */ |
| send_seek(0); |
| |
| /* Send relative seek to increase track by 1 */ |
| floppy_send(CMD_RELATIVE_SEEK_IN); |
| floppy_send(head << 2 | drive); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(cyl); |
| |
| ack_irq(&pcn); |
| g_assert(pcn == 1); |
| |
| /* Send relative seek to decrease track by 1 */ |
| floppy_send(CMD_RELATIVE_SEEK_OUT); |
| floppy_send(head << 2 | drive); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(cyl); |
| |
| ack_irq(&pcn); |
| g_assert(pcn == 0); |
| } |
| |
| static void test_read_id(void) |
| { |
| uint8_t drive = 0; |
| uint8_t head = 0; |
| uint8_t cyl; |
| uint8_t st0; |
| uint8_t msr; |
| |
| /* Seek to track 0 and check with READ ID */ |
| send_seek(0); |
| |
| floppy_send(CMD_READ_ID); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(head << 2 | drive); |
| |
| msr = inb(FLOPPY_BASE + reg_msr); |
| if (!get_irq(FLOPPY_IRQ)) { |
| assert_bit_set(msr, BUSY); |
| assert_bit_clear(msr, RQM); |
| } |
| |
| while (!get_irq(FLOPPY_IRQ)) { |
| /* qemu involves a timer with READ ID... */ |
| clock_step(1000000000LL / 50); |
| } |
| |
| msr = inb(FLOPPY_BASE + reg_msr); |
| assert_bit_set(msr, BUSY | RQM | DIO); |
| |
| st0 = floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| cyl = floppy_recv(); |
| head = floppy_recv(); |
| floppy_recv(); |
| g_assert(get_irq(FLOPPY_IRQ)); |
| floppy_recv(); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| |
| g_assert_cmpint(cyl, ==, 0); |
| g_assert_cmpint(head, ==, 0); |
| g_assert_cmpint(st0, ==, head << 2); |
| |
| /* Seek to track 8 on head 1 and check with READ ID */ |
| head = 1; |
| cyl = 8; |
| |
| floppy_send(CMD_SEEK); |
| floppy_send(head << 2 | drive); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(cyl); |
| g_assert(get_irq(FLOPPY_IRQ)); |
| ack_irq(NULL); |
| |
| floppy_send(CMD_READ_ID); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| floppy_send(head << 2 | drive); |
| |
| msr = inb(FLOPPY_BASE + reg_msr); |
| if (!get_irq(FLOPPY_IRQ)) { |
| assert_bit_set(msr, BUSY); |
| assert_bit_clear(msr, RQM); |
| } |
| |
| while (!get_irq(FLOPPY_IRQ)) { |
| /* qemu involves a timer with READ ID... */ |
| clock_step(1000000000LL / 50); |
| } |
| |
| msr = inb(FLOPPY_BASE + reg_msr); |
| assert_bit_set(msr, BUSY | RQM | DIO); |
| |
| st0 = floppy_recv(); |
| floppy_recv(); |
| floppy_recv(); |
| cyl = floppy_recv(); |
| head = floppy_recv(); |
| floppy_recv(); |
| g_assert(get_irq(FLOPPY_IRQ)); |
| floppy_recv(); |
| g_assert(!get_irq(FLOPPY_IRQ)); |
| |
| g_assert_cmpint(cyl, ==, 8); |
| g_assert_cmpint(head, ==, 1); |
| g_assert_cmpint(st0, ==, head << 2); |
| } |
| |
| static void test_read_no_dma_1(void) |
| { |
| uint8_t ret; |
| |
| outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08); |
| send_seek(0); |
| ret = send_read_no_dma_command(1, 0x04); |
| g_assert(ret == 0); |
| } |
| |
| static void test_read_no_dma_18(void) |
| { |
| uint8_t ret; |
| |
| outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08); |
| send_seek(0); |
| ret = send_read_no_dma_command(18, 0x04); |
| g_assert(ret == 0); |
| } |
| |
| static void test_read_no_dma_19(void) |
| { |
| uint8_t ret; |
| |
| outb(FLOPPY_BASE + reg_dor, inb(FLOPPY_BASE + reg_dor) & ~0x08); |
| send_seek(0); |
| ret = send_read_no_dma_command(19, 0x20); |
| g_assert(ret == 0); |
| } |
| |
| static void test_verify(void) |
| { |
| uint8_t ret; |
| |
| ret = send_read_command(CMD_VERIFY); |
| g_assert(ret == 0); |
| } |
| |
| /* success if no crash or abort */ |
| static void fuzz_registers(void) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < 1000; i++) { |
| uint8_t reg, val; |
| |
| reg = (uint8_t)g_test_rand_int_range(0, 8); |
| val = (uint8_t)g_test_rand_int_range(0, 256); |
| |
| outb(FLOPPY_BASE + reg, val); |
| inb(FLOPPY_BASE + reg); |
| } |
| } |
| |
| static bool qtest_check_clang_sanitizer(void) |
| { |
| #ifdef QEMU_SANITIZE_ADDRESS |
| return true; |
| #else |
| g_test_skip("QEMU not configured using --enable-asan"); |
| return false; |
| #endif |
| } |
| static void test_cve_2021_20196(void) |
| { |
| QTestState *s; |
| |
| if (!qtest_check_clang_sanitizer()) { |
| return; |
| } |
| |
| s = qtest_initf("-nographic -m 32M -nodefaults " DRIVE_FLOPPY_BLANK); |
| |
| qtest_outw(s, 0x3f4, 0x0500); |
| qtest_outb(s, 0x3f5, 0x00); |
| qtest_outb(s, 0x3f5, 0x00); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outb(s, 0x3f5, 0x00); |
| qtest_outw(s, 0x3f1, 0x0400); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outb(s, 0x3f5, 0x00); |
| qtest_outb(s, 0x3f5, 0x01); |
| qtest_outw(s, 0x3f1, 0x0500); |
| qtest_outb(s, 0x3f5, 0x00); |
| qtest_quit(s); |
| } |
| |
| static void test_cve_2021_3507(void) |
| { |
| QTestState *s; |
| |
| s = qtest_initf("-nographic -m 32M -nodefaults " |
| "-drive file=%s,format=raw,if=floppy,snapshot=on", |
| test_image); |
| qtest_outl(s, 0x9, 0x0a0206); |
| qtest_outw(s, 0x3f4, 0x1600); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outw(s, 0x3f4, 0x0200); |
| qtest_outw(s, 0x3f4, 0x0200); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_outw(s, 0x3f4, 0x0000); |
| qtest_quit(s); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int fd; |
| int ret; |
| |
| /* Create a temporary raw image */ |
| fd = g_file_open_tmp("qtest.XXXXXX", &test_image, NULL); |
| g_assert(fd >= 0); |
| ret = ftruncate(fd, TEST_IMAGE_SIZE); |
| g_assert(ret == 0); |
| close(fd); |
| |
| /* Run the tests */ |
| g_test_init(&argc, &argv, NULL); |
| |
| qtest_start("-machine pc -device floppy,id=floppy0"); |
| qtest_irq_intercept_in(global_qtest, "ioapic"); |
| qtest_add_func("/fdc/cmos", test_cmos); |
| qtest_add_func("/fdc/no_media_on_start", test_no_media_on_start); |
| qtest_add_func("/fdc/read_without_media", test_read_without_media); |
| qtest_add_func("/fdc/media_change", test_media_change); |
| qtest_add_func("/fdc/sense_interrupt", test_sense_interrupt); |
| qtest_add_func("/fdc/relative_seek", test_relative_seek); |
| qtest_add_func("/fdc/read_id", test_read_id); |
| qtest_add_func("/fdc/verify", test_verify); |
| qtest_add_func("/fdc/media_insert", test_media_insert); |
| qtest_add_func("/fdc/read_no_dma_1", test_read_no_dma_1); |
| qtest_add_func("/fdc/read_no_dma_18", test_read_no_dma_18); |
| qtest_add_func("/fdc/read_no_dma_19", test_read_no_dma_19); |
| qtest_add_func("/fdc/fuzz-registers", fuzz_registers); |
| qtest_add_func("/fdc/fuzz/cve_2021_20196", test_cve_2021_20196); |
| qtest_add_func("/fdc/fuzz/cve_2021_3507", test_cve_2021_3507); |
| |
| ret = g_test_run(); |
| |
| /* Cleanup */ |
| qtest_end(); |
| unlink(test_image); |
| g_free(test_image); |
| |
| return ret; |
| } |