| /* |
| * Texas Instruments TMP105 temperature sensor. |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Written by Andrzej Zaborowski <andrew@openedhand.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #include "hw.h" |
| #include "i2c.h" |
| |
| struct tmp105_s { |
| i2c_slave i2c; |
| int len; |
| uint8_t buf[2]; |
| qemu_irq pin; |
| |
| uint8_t pointer; |
| uint8_t config; |
| int16_t temperature; |
| int16_t limit[2]; |
| int faults; |
| int alarm; |
| }; |
| |
| static void tmp105_interrupt_update(struct tmp105_s *s) |
| { |
| qemu_set_irq(s->pin, s->alarm ^ ((~s->config >> 2) & 1)); /* POL */ |
| } |
| |
| static void tmp105_alarm_update(struct tmp105_s *s) |
| { |
| if ((s->config >> 0) & 1) { /* SD */ |
| if ((s->config >> 7) & 1) /* OS */ |
| s->config &= ~(1 << 7); /* OS */ |
| else |
| return; |
| } |
| |
| if ((s->config >> 1) & 1) { /* TM */ |
| if (s->temperature >= s->limit[1]) |
| s->alarm = 1; |
| else if (s->temperature < s->limit[0]) |
| s->alarm = 1; |
| } else { |
| if (s->temperature >= s->limit[1]) |
| s->alarm = 1; |
| else if (s->temperature < s->limit[0]) |
| s->alarm = 0; |
| } |
| |
| tmp105_interrupt_update(s); |
| } |
| |
| /* Units are 0.001 centigrades relative to 0 C. */ |
| void tmp105_set(i2c_slave *i2c, int temp) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) i2c; |
| |
| if (temp >= 128000 || temp < -128000) { |
| fprintf(stderr, "%s: values is out of range (%i.%03i C)\n", |
| __FUNCTION__, temp / 1000, temp % 1000); |
| exit(-1); |
| } |
| |
| s->temperature = ((int16_t) (temp * 0x800 / 128000)) << 4; |
| |
| tmp105_alarm_update(s); |
| } |
| |
| static const int tmp105_faultq[4] = { 1, 2, 4, 6 }; |
| |
| static void tmp105_read(struct tmp105_s *s) |
| { |
| s->len = 0; |
| |
| if ((s->config >> 1) & 1) { /* TM */ |
| s->alarm = 0; |
| tmp105_interrupt_update(s); |
| } |
| |
| switch (s->pointer & 3) { |
| case 0: /* Temperature */ |
| s->buf[s->len ++] = (((uint16_t) s->temperature) >> 8); |
| s->buf[s->len ++] = (((uint16_t) s->temperature) >> 0) & |
| (0xf0 << ((~s->config >> 5) & 3)); /* R */ |
| break; |
| |
| case 1: /* Configuration */ |
| s->buf[s->len ++] = s->config; |
| break; |
| |
| case 2: /* T_LOW */ |
| s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 8; |
| s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 0; |
| break; |
| |
| case 3: /* T_HIGH */ |
| s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 8; |
| s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 0; |
| break; |
| } |
| } |
| |
| static void tmp105_write(struct tmp105_s *s) |
| { |
| switch (s->pointer & 3) { |
| case 0: /* Temperature */ |
| break; |
| |
| case 1: /* Configuration */ |
| if (s->buf[0] & ~s->config & (1 << 0)) /* SD */ |
| printf("%s: TMP105 shutdown\n", __FUNCTION__); |
| s->config = s->buf[0]; |
| s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */ |
| tmp105_alarm_update(s); |
| break; |
| |
| case 2: /* T_LOW */ |
| case 3: /* T_HIGH */ |
| if (s->len >= 3) |
| s->limit[s->pointer & 1] = (int16_t) |
| ((((uint16_t) s->buf[0]) << 8) | s->buf[1]); |
| tmp105_alarm_update(s); |
| break; |
| } |
| } |
| |
| static int tmp105_rx(i2c_slave *i2c) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) i2c; |
| |
| if (s->len < 2) |
| return s->buf[s->len ++]; |
| else |
| return 0xff; |
| } |
| |
| static int tmp105_tx(i2c_slave *i2c, uint8_t data) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) i2c; |
| |
| if (!s->len ++) |
| s->pointer = data; |
| else { |
| if (s->len <= 2) |
| s->buf[s->len - 1] = data; |
| tmp105_write(s); |
| } |
| |
| return 0; |
| } |
| |
| static void tmp105_event(i2c_slave *i2c, enum i2c_event event) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) i2c; |
| |
| if (event == I2C_START_RECV) |
| tmp105_read(s); |
| |
| s->len = 0; |
| } |
| |
| static void tmp105_save(QEMUFile *f, void *opaque) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) opaque; |
| |
| qemu_put_byte(f, s->len); |
| qemu_put_8s(f, &s->buf[0]); |
| qemu_put_8s(f, &s->buf[1]); |
| |
| qemu_put_8s(f, &s->pointer); |
| qemu_put_8s(f, &s->config); |
| qemu_put_sbe16s(f, &s->temperature); |
| qemu_put_sbe16s(f, &s->limit[0]); |
| qemu_put_sbe16s(f, &s->limit[1]); |
| qemu_put_byte(f, s->alarm); |
| s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */ |
| |
| i2c_slave_save(f, &s->i2c); |
| } |
| |
| static int tmp105_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) opaque; |
| |
| s->len = qemu_get_byte(f); |
| qemu_get_8s(f, &s->buf[0]); |
| qemu_get_8s(f, &s->buf[1]); |
| |
| qemu_get_8s(f, &s->pointer); |
| qemu_get_8s(f, &s->config); |
| qemu_get_sbe16s(f, &s->temperature); |
| qemu_get_sbe16s(f, &s->limit[0]); |
| qemu_get_sbe16s(f, &s->limit[1]); |
| s->alarm = qemu_get_byte(f); |
| |
| tmp105_interrupt_update(s); |
| |
| i2c_slave_load(f, &s->i2c); |
| return 0; |
| } |
| |
| void tmp105_reset(i2c_slave *i2c) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) i2c; |
| |
| s->temperature = 0; |
| s->pointer = 0; |
| s->config = 0; |
| s->faults = tmp105_faultq[(s->config >> 3) & 3]; |
| s->alarm = 0; |
| |
| tmp105_interrupt_update(s); |
| } |
| |
| struct i2c_slave *tmp105_init(i2c_bus *bus, qemu_irq alarm) |
| { |
| struct tmp105_s *s = (struct tmp105_s *) |
| i2c_slave_init(bus, 0, sizeof(struct tmp105_s)); |
| |
| s->i2c.event = tmp105_event; |
| s->i2c.recv = tmp105_rx; |
| s->i2c.send = tmp105_tx; |
| s->pin = alarm; |
| |
| tmp105_reset(&s->i2c); |
| |
| register_savevm("TMP105", -1, 0, tmp105_save, tmp105_load, s); |
| |
| return &s->i2c; |
| } |