| /* |
| * BCM2835 SYS timer emulation |
| * |
| * Copyright (C) 2019 Philippe Mathieu-Daudé <f4bug@amsat.org> |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * |
| * Datasheet: BCM2835 ARM Peripherals (C6357-M-1398) |
| * https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf |
| * |
| * Only the free running 64-bit counter is implemented. |
| * The 4 COMPARE registers and the interruption are not implemented. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "qemu/timer.h" |
| #include "hw/timer/bcm2835_systmr.h" |
| #include "hw/registerfields.h" |
| #include "migration/vmstate.h" |
| #include "trace.h" |
| |
| REG32(CTRL_STATUS, 0x00) |
| REG32(COUNTER_LOW, 0x04) |
| REG32(COUNTER_HIGH, 0x08) |
| REG32(COMPARE0, 0x0c) |
| REG32(COMPARE1, 0x10) |
| REG32(COMPARE2, 0x14) |
| REG32(COMPARE3, 0x18) |
| |
| static void bcm2835_systmr_timer_expire(void *opaque) |
| { |
| BCM2835SystemTimerCompare *tmr = opaque; |
| |
| trace_bcm2835_systmr_timer_expired(tmr->id); |
| tmr->state->reg.ctrl_status |= 1 << tmr->id; |
| qemu_set_irq(tmr->irq, 1); |
| } |
| |
| static uint64_t bcm2835_systmr_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| BCM2835SystemTimerState *s = BCM2835_SYSTIMER(opaque); |
| uint64_t r = 0; |
| |
| switch (offset) { |
| case A_CTRL_STATUS: |
| r = s->reg.ctrl_status; |
| break; |
| case A_COMPARE0 ... A_COMPARE3: |
| r = s->reg.compare[(offset - A_COMPARE0) >> 2]; |
| break; |
| case A_COUNTER_LOW: |
| case A_COUNTER_HIGH: |
| /* Free running counter at 1MHz */ |
| r = qemu_clock_get_us(QEMU_CLOCK_VIRTUAL); |
| r >>= 8 * (offset - A_COUNTER_LOW); |
| r &= UINT32_MAX; |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: bad offset 0x%" HWADDR_PRIx "\n", |
| __func__, offset); |
| break; |
| } |
| trace_bcm2835_systmr_read(offset, r); |
| |
| return r; |
| } |
| |
| static void bcm2835_systmr_write(void *opaque, hwaddr offset, |
| uint64_t value64, unsigned size) |
| { |
| BCM2835SystemTimerState *s = BCM2835_SYSTIMER(opaque); |
| int index; |
| uint32_t value = value64; |
| uint32_t triggers_delay_us; |
| uint64_t now; |
| |
| trace_bcm2835_systmr_write(offset, value); |
| switch (offset) { |
| case A_CTRL_STATUS: |
| s->reg.ctrl_status &= ~value; /* Ack */ |
| for (index = 0; index < ARRAY_SIZE(s->tmr); index++) { |
| if (extract32(value, index, 1)) { |
| trace_bcm2835_systmr_irq_ack(index); |
| qemu_set_irq(s->tmr[index].irq, 0); |
| } |
| } |
| break; |
| case A_COMPARE0 ... A_COMPARE3: |
| index = (offset - A_COMPARE0) >> 2; |
| s->reg.compare[index] = value; |
| now = qemu_clock_get_us(QEMU_CLOCK_VIRTUAL); |
| /* Compare lower 32-bits of the free-running counter. */ |
| triggers_delay_us = value - now; |
| trace_bcm2835_systmr_run(index, triggers_delay_us); |
| timer_mod(&s->tmr[index].timer, now + triggers_delay_us); |
| break; |
| case A_COUNTER_LOW: |
| case A_COUNTER_HIGH: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: read-only ofs 0x%" HWADDR_PRIx "\n", |
| __func__, offset); |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: bad offset 0x%" HWADDR_PRIx "\n", |
| __func__, offset); |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps bcm2835_systmr_ops = { |
| .read = bcm2835_systmr_read, |
| .write = bcm2835_systmr_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static void bcm2835_systmr_reset(DeviceState *dev) |
| { |
| BCM2835SystemTimerState *s = BCM2835_SYSTIMER(dev); |
| |
| memset(&s->reg, 0, sizeof(s->reg)); |
| } |
| |
| static void bcm2835_systmr_realize(DeviceState *dev, Error **errp) |
| { |
| BCM2835SystemTimerState *s = BCM2835_SYSTIMER(dev); |
| |
| memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_systmr_ops, |
| s, "bcm2835-sys-timer", 0x20); |
| sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); |
| |
| for (size_t i = 0; i < ARRAY_SIZE(s->tmr); i++) { |
| s->tmr[i].id = i; |
| s->tmr[i].state = s; |
| sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->tmr[i].irq); |
| timer_init_us(&s->tmr[i].timer, QEMU_CLOCK_VIRTUAL, |
| bcm2835_systmr_timer_expire, &s->tmr[i]); |
| } |
| } |
| |
| static const VMStateDescription bcm2835_systmr_vmstate = { |
| .name = "bcm2835_sys_timer", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(reg.ctrl_status, BCM2835SystemTimerState), |
| VMSTATE_UINT32_ARRAY(reg.compare, BCM2835SystemTimerState, |
| BCM2835_SYSTIMER_COUNT), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void bcm2835_systmr_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = bcm2835_systmr_realize; |
| dc->reset = bcm2835_systmr_reset; |
| dc->vmsd = &bcm2835_systmr_vmstate; |
| } |
| |
| static const TypeInfo bcm2835_systmr_info = { |
| .name = TYPE_BCM2835_SYSTIMER, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(BCM2835SystemTimerState), |
| .class_init = bcm2835_systmr_class_init, |
| }; |
| |
| static void bcm2835_systmr_register_types(void) |
| { |
| type_register_static(&bcm2835_systmr_info); |
| } |
| |
| type_init(bcm2835_systmr_register_types); |