| # See docs/devel/tracing.txt for syntax documentation. |
| |
| # hw/ide/core.c |
| # portio |
| ide_ioport_read(uint32_t addr, const char *reg, uint32_t val, void *bus, void *s) "IDE PIO rd @ 0x%"PRIx32" (%s); val 0x%02"PRIx32"; bus %p IDEState %p" |
| ide_ioport_write(uint32_t addr, const char *reg, uint32_t val, void *bus, void *s) "IDE PIO wr @ 0x%"PRIx32" (%s); val 0x%02"PRIx32"; bus %p IDEState %p" |
| ide_status_read(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO rd @ 0x%"PRIx32" (Alt Status); val 0x%02"PRIx32"; bus %p; IDEState %p" |
| ide_cmd_write(uint32_t addr, uint32_t val, void *bus) "IDE PIO wr @ 0x%"PRIx32" (Device Control); val 0x%02"PRIx32"; bus %p" |
| # Warning: verbose |
| ide_data_readw(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO rd @ 0x%"PRIx32" (Data: Word); val 0x%04"PRIx32"; bus %p; IDEState %p" |
| ide_data_writew(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO wr @ 0x%"PRIx32" (Data: Word); val 0x%04"PRIx32"; bus %p; IDEState %p" |
| ide_data_readl(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO rd @ 0x%"PRIx32" (Data: Long); val 0x%08"PRIx32"; bus %p; IDEState %p" |
| ide_data_writel(uint32_t addr, uint32_t val, void *bus, void *s) "IDE PIO wr @ 0x%"PRIx32" (Data: Long); val 0x%08"PRIx32"; bus %p; IDEState %p" |
| # misc |
| ide_exec_cmd(void *bus, void *state, uint32_t cmd) "IDE exec cmd: bus %p; state %p; cmd 0x%02x" |
| ide_cancel_dma_sync_buffered(void *fn, void *req) "invoking cb %p of buffered request %p with -ECANCELED" |
| ide_cancel_dma_sync_remaining(void) "draining all remaining requests" |
| ide_sector_read(int64_t sector_num, int nsectors) "sector=%"PRId64" nsectors=%d" |
| ide_sector_write(int64_t sector_num, int nsectors) "sector=%"PRId64" nsectors=%d" |
| ide_reset(void *s) "IDEstate %p" |
| ide_bus_reset_aio(void) "aio_cancel" |
| ide_dma_cb(void *s, int64_t sector_num, int n, const char *dma) "IDEState %p; sector_num=%"PRId64" n=%d cmd=%s" |
| |
| # BMDMA HBAs: |
| |
| # hw/ide/cmd646.c |
| bmdma_read_cmd646(uint64_t addr, uint32_t val) "bmdma: readb 0x%"PRIx64" : 0x%02x" |
| bmdma_write_cmd646(uint64_t addr, uint64_t val) "bmdma: writeb 0x%"PRIx64" : 0x%02"PRIx64 |
| |
| # hw/ide/pci.c |
| bmdma_reset(void) "" |
| bmdma_cmd_writeb(uint32_t val) "val: 0x%08x" |
| bmdma_addr_read(uint64_t data) "data: 0x%016"PRIx64 |
| bmdma_addr_write(uint64_t data) "data: 0x%016"PRIx64 |
| |
| # hw/ide/piix.c |
| bmdma_read(uint64_t addr, uint8_t val) "bmdma: readb 0x%"PRIx64" : 0x%02x" |
| bmdma_write(uint64_t addr, uint64_t val) "bmdma: writeb 0x%"PRIx64" : 0x%02"PRIx64 |
| |
| # hw/ide/sii3112.c |
| sii3112_read(int size, uint64_t addr, uint64_t val) "bmdma: read (size %d) 0x%"PRIx64" : 0x%02"PRIx64 |
| sii3112_write(int size, uint64_t addr, uint64_t val) "bmdma: write (size %d) 0x%"PRIx64" : 0x%02"PRIx64 |
| sii3112_set_irq(int channel, int level) "channel %d level %d" |
| |
| # hw/ide/via.c |
| bmdma_read_via(uint64_t addr, uint32_t val) "bmdma: readb 0x%"PRIx64" : 0x%02x" |
| bmdma_write_via(uint64_t addr, uint64_t val) "bmdma: writeb 0x%"PRIx64" : 0x%02"PRIx64 |
| |
| # hw/ide/atapi.c |
| cd_read_sector_sync(int lba) "lba=%d" |
| cd_read_sector_cb(int lba, int ret) "lba=%d ret=%d" |
| cd_read_sector(int lba) "lba=%d" |
| ide_atapi_cmd_error(void *s, int sense_key, int asc) "IDEState: %p; sense=0x%x asc=0x%x" |
| ide_atapi_cmd_reply_end(void *s, int tx_size, int elem_tx_size, int32_t index) "IDEState %p; reply: tx_size=%d elem_tx_size=%d index=%"PRId32 |
| ide_atapi_cmd_reply_end_eot(void *s, int status) "IDEState: %p; end of transfer, status=0x%x" |
| ide_atapi_cmd_reply_end_bcl(void *s, int bcl) "IDEState: %p; byte_count_limit=%d" |
| ide_atapi_cmd_reply_end_new(void *s, int status) "IDEState: %p; new transfer started, status=0x%x" |
| ide_atapi_cmd_check_status(void *s) "IDEState: %p" |
| ide_atapi_cmd_read(void *s, const char *method, int lba, int nb_sectors) "IDEState: %p; read %s: LBA=%d nb_sectors=%d" |
| ide_atapi_cmd(void *s, uint8_t cmd) "IDEState: %p; cmd: 0x%02x" |
| ide_atapi_cmd_read_dma_cb_aio(void *s, int lba, int n) "IDEState: %p; aio read: lba=%d n=%d" |
| # Warning: Verbose |
| ide_atapi_cmd_packet(void *s, uint16_t limit, const char *packet) "IDEState: %p; limit=0x%x packet: %s" |
| |
| # hw/ide/ahci.c |
| ahci_port_read(void *s, int port, int offset, uint32_t ret) "ahci(%p)[%d]: port read @ 0x%x: 0x%08x" |
| ahci_irq_raise(void *s) "ahci(%p): raise irq" |
| ahci_irq_lower(void *s) "ahci(%p): lower irq" |
| ahci_check_irq(void *s, uint32_t old, uint32_t new) "ahci(%p): check irq 0x%08x --> 0x%08x" |
| ahci_trigger_irq(void *s, int port, const char *name, uint32_t val, uint32_t old, uint32_t new, uint32_t effective) "ahci(%p)[%d]: trigger irq +%s (0x%08x); irqstat: 0x%08x --> 0x%08x; effective: 0x%08x" |
| ahci_port_write(void *s, int port, int offset, uint32_t val) "ahci(%p)[%d]: port write @ 0x%x: 0x%08x" |
| ahci_mem_read_32(void *s, uint64_t addr, uint32_t val) "ahci(%p): mem read @ 0x%"PRIx64": 0x%08x" |
| ahci_mem_read(void *s, unsigned size, uint64_t addr, uint64_t val) "ahci(%p): read%u @ 0x%"PRIx64": 0x%016"PRIx64 |
| ahci_mem_write(void *s, unsigned size, uint64_t addr, uint64_t val) "ahci(%p): write%u @ 0x%"PRIx64": 0x%016"PRIx64 |
| ahci_mem_write_unknown(void *s, unsigned size, uint64_t addr, uint64_t val) "ahci(%p): write%u to unknown register 0x%"PRIx64": 0x%016"PRIx64 |
| ahci_set_signature(void *s, int port, uint8_t nsector, uint8_t sector, uint8_t lcyl, uint8_t hcyl, uint32_t sig) "ahci(%p)[%d]: set signature sector:0x%02x nsector:0x%02x lcyl:0x%02x hcyl:0x%02x (cumulatively: 0x%08x)" |
| ahci_reset_port(void *s, int port) "ahci(%p)[%d]: reset port" |
| ahci_unmap_fis_address_null(void *s, int port) "ahci(%p)[%d]: Attempt to unmap NULL FIS address" |
| ahci_unmap_clb_address_null(void *s, int port) "ahci(%p)[%d]: Attempt to unmap NULL CLB address" |
| ahci_populate_sglist(void *s, int port) "ahci(%p)[%d]" |
| ahci_populate_sglist_no_prdtl(void *s, int port, uint16_t opts) "ahci(%p)[%d]: no sg list given by guest: 0x%04x" |
| ahci_populate_sglist_no_map(void *s, int port) "ahci(%p)[%d]: DMA mapping failed" |
| ahci_populate_sglist_short_map(void *s, int port) "ahci(%p)[%d]: mapped less than expected" |
| ahci_populate_sglist_bad_offset(void *s, int port, int off_idx, int64_t off_pos) "ahci(%p)[%d]: Incorrect offset! off_idx: %d, off_pos: %"PRId64 |
| ncq_finish(void *s, int port, uint8_t tag) "ahci(%p)[%d][tag:%d]: NCQ transfer finished" |
| execute_ncq_command_read(void *s, int port, uint8_t tag, int count, int64_t lba) "ahci(%p)[%d][tag:%d]: NCQ reading %d sectors from LBA %"PRId64 |
| execute_ncq_command_write(void *s, int port, uint8_t tag, int count, int64_t lba) "ahci(%p)[%d][tag:%d]: NCQ writing %d sectors to LBA %"PRId64 |
| execute_ncq_command_unsup(void *s, int port, uint8_t tag, uint8_t cmd) "ahci(%p)[%d][tag:%d]: error: unsupported NCQ command (0x%02x) received" |
| process_ncq_command_mismatch(void *s, int port, uint8_t tag, uint8_t slot) "ahci(%p)[%d][tag:%d]: Warning: NCQ slot (%d) did not match the given tag" |
| process_ncq_command_aux(void *s, int port, uint8_t tag) "ahci(%p)[%d][tag:%d]: Warn: Attempt to use NCQ auxiliary fields" |
| process_ncq_command_prioicc(void *s, int port, uint8_t tag) "ahci(%p)[%d][tag:%d]: Warn: Unsupported attempt to use PRIO/ICC fields" |
| process_ncq_command_fua(void *s, int port, uint8_t tag) "ahci(%p)[%d][tag:%d]: Warn: Unsupported attempt to use Force Unit Access" |
| process_ncq_command_rarc(void *s, int port, uint8_t tag) "ahci(%p)[%d][tag:%d]: Warn: Unsupported attempt to use Rebuild Assist" |
| process_ncq_command_large(void *s, int port, uint8_t tag, size_t prdtl, size_t size) "ahci(%p)[%d][tag:%d]: Warn: PRDTL (0x%zx) does not match requested size (0x%zx)" |
| process_ncq_command(void *s, int port, uint8_t tag, uint8_t cmd, uint64_t lba, uint64_t end) "ahci(%p)[%d][tag:%d]: NCQ op 0x%02x on sectors [%"PRId64",%"PRId64"]" |
| handle_reg_h2d_fis_pmp(void *s, int port, char b0, char b1, char b2) "ahci(%p)[%d]: Port Multiplier not supported, FIS: 0x%02x-%02x-%02x" |
| handle_reg_h2d_fis_res(void *s, int port, char b0, char b1, char b2) "ahci(%p)[%d]: Reserved flags set in H2D Register FIS, FIS: 0x%02x-%02x-%02x" |
| handle_cmd_busy(void *s, int port) "ahci(%p)[%d]: engine busy" |
| handle_cmd_nolist(void *s, int port) "ahci(%p)[%d]: handle_cmd called without s->dev[port].lst" |
| handle_cmd_badport(void *s, int port) "ahci(%p)[%d]: guest accessed unused port" |
| handle_cmd_badfis(void *s, int port) "ahci(%p)[%d]: guest provided an invalid cmd FIS" |
| handle_cmd_badmap(void *s, int port, uint64_t len) "ahci(%p)[%d]: dma_memory_map failed, 0x%02"PRIx64" != 0x80" |
| handle_cmd_unhandled_fis(void *s, int port, uint8_t b0, uint8_t b1, uint8_t b2) "ahci(%p)[%d]: unhandled FIS type. cmd_fis: 0x%02x-%02x-%02x" |
| ahci_start_transfer(void *s, int port, const char *rw, uint32_t size, const char *tgt, const char *sgl) "ahci(%p)[%d]: %sing %d bytes on %s w/%s sglist" |
| ahci_start_dma(void *s, int port) "ahci(%p)[%d]: start dma" |
| ahci_dma_prepare_buf(void *s, int port, int32_t io_buffer_size, int32_t limit) "ahci(%p)[%d]: prepare buf limit=%"PRId32" prepared=%"PRId32 |
| ahci_dma_prepare_buf_fail(void *s, int port) "ahci(%p)[%d]: sglist population failed" |
| ahci_dma_rw_buf(void *s, int port, int l) "ahci(%p)[%d] len=0x%x" |
| ahci_cmd_done(void *s, int port) "ahci(%p)[%d]: cmd done" |
| ahci_reset(void *s) "ahci(%p): HBA reset" |
| allwinner_ahci_mem_read(void *s, void *a, uint64_t addr, uint64_t val, unsigned size) "ahci(%p): read a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64", size=%d" |
| allwinner_ahci_mem_write(void *s, void *a, uint64_t addr, uint64_t val, unsigned size) "ahci(%p): write a=%p addr=0x%"HWADDR_PRIx" val=0x%"PRIx64", size=%d" |
| |
| # Warning: Verbose |
| handle_reg_h2d_fis_dump(void *s, int port, const char *fis) "ahci(%p)[%d]: %s" |
| handle_cmd_fis_dump(void *s, int port, const char *fis) "ahci(%p)[%d]: %s" |
