| /* |
| * QEMU RISC-V Board Compatible with SiFive Freedom U SDK |
| * |
| * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu |
| * Copyright (c) 2017 SiFive, Inc. |
| * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com> |
| * |
| * Provides a board compatible with the SiFive Freedom U SDK: |
| * |
| * 0) UART |
| * 1) CLINT (Core Level Interruptor) |
| * 2) PLIC (Platform Level Interrupt Controller) |
| * 3) PRCI (Power, Reset, Clock, Interrupt) |
| * 4) GPIO (General Purpose Input/Output Controller) |
| * 5) OTP (One-Time Programmable) memory with stored serial number |
| * 6) GEM (Gigabit Ethernet Controller) and management block |
| * 7) DMA (Direct Memory Access Controller) |
| * 8) SPI0 connected to an SPI flash |
| * 9) SPI2 connected to an SD card |
| * |
| * This board currently generates devicetree dynamically that indicates at least |
| * two harts and up to five harts. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "qapi/visitor.h" |
| #include "hw/boards.h" |
| #include "hw/irq.h" |
| #include "hw/loader.h" |
| #include "hw/sysbus.h" |
| #include "hw/char/serial.h" |
| #include "hw/cpu/cluster.h" |
| #include "hw/misc/unimp.h" |
| #include "hw/ssi/ssi.h" |
| #include "target/riscv/cpu.h" |
| #include "hw/riscv/riscv_hart.h" |
| #include "hw/riscv/sifive_u.h" |
| #include "hw/riscv/boot.h" |
| #include "hw/char/sifive_uart.h" |
| #include "hw/intc/sifive_clint.h" |
| #include "hw/intc/sifive_plic.h" |
| #include "chardev/char.h" |
| #include "net/eth.h" |
| #include "sysemu/arch_init.h" |
| #include "sysemu/device_tree.h" |
| #include "sysemu/runstate.h" |
| #include "sysemu/sysemu.h" |
| |
| #include <libfdt.h> |
| |
| static const MemMapEntry sifive_u_memmap[] = { |
| [SIFIVE_U_DEV_DEBUG] = { 0x0, 0x100 }, |
| [SIFIVE_U_DEV_MROM] = { 0x1000, 0xf000 }, |
| [SIFIVE_U_DEV_CLINT] = { 0x2000000, 0x10000 }, |
| [SIFIVE_U_DEV_L2CC] = { 0x2010000, 0x1000 }, |
| [SIFIVE_U_DEV_PDMA] = { 0x3000000, 0x100000 }, |
| [SIFIVE_U_DEV_L2LIM] = { 0x8000000, 0x2000000 }, |
| [SIFIVE_U_DEV_PLIC] = { 0xc000000, 0x4000000 }, |
| [SIFIVE_U_DEV_PRCI] = { 0x10000000, 0x1000 }, |
| [SIFIVE_U_DEV_UART0] = { 0x10010000, 0x1000 }, |
| [SIFIVE_U_DEV_UART1] = { 0x10011000, 0x1000 }, |
| [SIFIVE_U_DEV_QSPI0] = { 0x10040000, 0x1000 }, |
| [SIFIVE_U_DEV_QSPI2] = { 0x10050000, 0x1000 }, |
| [SIFIVE_U_DEV_GPIO] = { 0x10060000, 0x1000 }, |
| [SIFIVE_U_DEV_OTP] = { 0x10070000, 0x1000 }, |
| [SIFIVE_U_DEV_GEM] = { 0x10090000, 0x2000 }, |
| [SIFIVE_U_DEV_GEM_MGMT] = { 0x100a0000, 0x1000 }, |
| [SIFIVE_U_DEV_DMC] = { 0x100b0000, 0x10000 }, |
| [SIFIVE_U_DEV_FLASH0] = { 0x20000000, 0x10000000 }, |
| [SIFIVE_U_DEV_DRAM] = { 0x80000000, 0x0 }, |
| }; |
| |
| #define OTP_SERIAL 1 |
| #define GEM_REVISION 0x10070109 |
| |
| static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, |
| uint64_t mem_size, const char *cmdline, bool is_32_bit) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| void *fdt; |
| int cpu; |
| uint32_t *cells; |
| char *nodename; |
| uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1; |
| uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle; |
| static const char * const ethclk_names[2] = { "pclk", "hclk" }; |
| static const char * const clint_compat[2] = { |
| "sifive,clint0", "riscv,clint0" |
| }; |
| static const char * const plic_compat[2] = { |
| "sifive,plic-1.0.0", "riscv,plic0" |
| }; |
| |
| if (ms->dtb) { |
| fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size); |
| if (!fdt) { |
| error_report("load_device_tree() failed"); |
| exit(1); |
| } |
| goto update_bootargs; |
| } else { |
| fdt = s->fdt = create_device_tree(&s->fdt_size); |
| if (!fdt) { |
| error_report("create_device_tree() failed"); |
| exit(1); |
| } |
| } |
| |
| qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00"); |
| qemu_fdt_setprop_string(fdt, "/", "compatible", |
| "sifive,hifive-unleashed-a00"); |
| qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); |
| |
| qemu_fdt_add_subnode(fdt, "/soc"); |
| qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); |
| qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus"); |
| qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); |
| |
| hfclk_phandle = phandle++; |
| nodename = g_strdup_printf("/hfclk"); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle); |
| qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk"); |
| qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", |
| SIFIVE_U_HFCLK_FREQ); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); |
| qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); |
| g_free(nodename); |
| |
| rtcclk_phandle = phandle++; |
| nodename = g_strdup_printf("/rtcclk"); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle); |
| qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk"); |
| qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", |
| SIFIVE_U_RTCCLK_FREQ); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); |
| qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/memory@%lx", |
| (long)memmap[SIFIVE_U_DEV_DRAM].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| memmap[SIFIVE_U_DEV_DRAM].base >> 32, memmap[SIFIVE_U_DEV_DRAM].base, |
| mem_size >> 32, mem_size); |
| qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); |
| g_free(nodename); |
| |
| qemu_fdt_add_subnode(fdt, "/cpus"); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", |
| SIFIVE_CLINT_TIMEBASE_FREQ); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); |
| |
| for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) { |
| int cpu_phandle = phandle++; |
| nodename = g_strdup_printf("/cpus/cpu@%d", cpu); |
| char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); |
| char *isa; |
| qemu_fdt_add_subnode(fdt, nodename); |
| /* cpu 0 is the management hart that does not have mmu */ |
| if (cpu != 0) { |
| if (is_32_bit) { |
| qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); |
| } else { |
| qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); |
| } |
| isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]); |
| } else { |
| isa = riscv_isa_string(&s->soc.e_cpus.harts[0]); |
| } |
| qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); |
| qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); |
| qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); |
| qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); |
| qemu_fdt_add_subnode(fdt, intc); |
| qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle); |
| qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); |
| qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); |
| g_free(isa); |
| g_free(intc); |
| g_free(nodename); |
| } |
| |
| cells = g_new0(uint32_t, ms->smp.cpus * 4); |
| for (cpu = 0; cpu < ms->smp.cpus; cpu++) { |
| nodename = |
| g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); |
| uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); |
| cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); |
| cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); |
| g_free(nodename); |
| } |
| nodename = g_strdup_printf("/soc/clint@%lx", |
| (long)memmap[SIFIVE_U_DEV_CLINT].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string_array(fdt, nodename, "compatible", |
| (char **)&clint_compat, ARRAY_SIZE(clint_compat)); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_CLINT].base, |
| 0x0, memmap[SIFIVE_U_DEV_CLINT].size); |
| qemu_fdt_setprop(fdt, nodename, "interrupts-extended", |
| cells, ms->smp.cpus * sizeof(uint32_t) * 4); |
| g_free(cells); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/otp@%lx", |
| (long)memmap[SIFIVE_U_DEV_OTP].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_OTP].base, |
| 0x0, memmap[SIFIVE_U_DEV_OTP].size); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "sifive,fu540-c000-otp"); |
| g_free(nodename); |
| |
| prci_phandle = phandle++; |
| nodename = g_strdup_printf("/soc/clock-controller@%lx", |
| (long)memmap[SIFIVE_U_DEV_PRCI].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1); |
| qemu_fdt_setprop_cells(fdt, nodename, "clocks", |
| hfclk_phandle, rtcclk_phandle); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_PRCI].base, |
| 0x0, memmap[SIFIVE_U_DEV_PRCI].size); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "sifive,fu540-c000-prci"); |
| g_free(nodename); |
| |
| plic_phandle = phandle++; |
| cells = g_new0(uint32_t, ms->smp.cpus * 4 - 2); |
| for (cpu = 0; cpu < ms->smp.cpus; cpu++) { |
| nodename = |
| g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); |
| uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); |
| /* cpu 0 is the management hart that does not have S-mode */ |
| if (cpu == 0) { |
| cells[0] = cpu_to_be32(intc_phandle); |
| cells[1] = cpu_to_be32(IRQ_M_EXT); |
| } else { |
| cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT); |
| cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT); |
| } |
| g_free(nodename); |
| } |
| nodename = g_strdup_printf("/soc/interrupt-controller@%lx", |
| (long)memmap[SIFIVE_U_DEV_PLIC].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); |
| qemu_fdt_setprop_string_array(fdt, nodename, "compatible", |
| (char **)&plic_compat, ARRAY_SIZE(plic_compat)); |
| qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop(fdt, nodename, "interrupts-extended", |
| cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t)); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_PLIC].base, |
| 0x0, memmap[SIFIVE_U_DEV_PLIC].size); |
| qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle); |
| plic_phandle = qemu_fdt_get_phandle(fdt, nodename); |
| g_free(cells); |
| g_free(nodename); |
| |
| gpio_phandle = phandle++; |
| nodename = g_strdup_printf("/soc/gpio@%lx", |
| (long)memmap[SIFIVE_U_DEV_GPIO].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle); |
| qemu_fdt_setprop_cells(fdt, nodename, "clocks", |
| prci_phandle, PRCI_CLK_TLCLK); |
| qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2); |
| qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2); |
| qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_GPIO].base, |
| 0x0, memmap[SIFIVE_U_DEV_GPIO].size); |
| qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0, |
| SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3, |
| SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6, |
| SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9, |
| SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12, |
| SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0"); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/gpio-restart"); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart"); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/dma@%lx", |
| (long)memmap[SIFIVE_U_DEV_PDMA].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1); |
| qemu_fdt_setprop_cells(fdt, nodename, "interrupts", |
| SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2, |
| SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5, |
| SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_PDMA].base, |
| 0x0, memmap[SIFIVE_U_DEV_PDMA].size); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "sifive,fu540-c000-pdma"); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/cache-controller@%lx", |
| (long)memmap[SIFIVE_U_DEV_L2CC].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_L2CC].base, |
| 0x0, memmap[SIFIVE_U_DEV_L2CC].size); |
| qemu_fdt_setprop_cells(fdt, nodename, "interrupts", |
| SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152); |
| qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024); |
| qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2); |
| qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "sifive,fu540-c000-ccache"); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/spi@%lx", |
| (long)memmap[SIFIVE_U_DEV_QSPI2].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); |
| qemu_fdt_setprop_cells(fdt, nodename, "clocks", |
| prci_phandle, PRCI_CLK_TLCLK); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_QSPI2].base, |
| 0x0, memmap[SIFIVE_U_DEV_QSPI2].size); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0"); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/spi@%lx/mmc@0", |
| (long)memmap[SIFIVE_U_DEV_QSPI2].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0); |
| qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300); |
| qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000); |
| qemu_fdt_setprop_cell(fdt, nodename, "reg", 0); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot"); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/spi@%lx", |
| (long)memmap[SIFIVE_U_DEV_QSPI0].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); |
| qemu_fdt_setprop_cells(fdt, nodename, "clocks", |
| prci_phandle, PRCI_CLK_TLCLK); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI0_IRQ); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_QSPI0].base, |
| 0x0, memmap[SIFIVE_U_DEV_QSPI0].size); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0"); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/spi@%lx/flash@0", |
| (long)memmap[SIFIVE_U_DEV_QSPI0].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "spi-rx-bus-width", 4); |
| qemu_fdt_setprop_cell(fdt, nodename, "spi-tx-bus-width", 4); |
| qemu_fdt_setprop(fdt, nodename, "m25p,fast-read", NULL, 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 50000000); |
| qemu_fdt_setprop_cell(fdt, nodename, "reg", 0); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "jedec,spi-nor"); |
| g_free(nodename); |
| |
| phy_phandle = phandle++; |
| nodename = g_strdup_printf("/soc/ethernet@%lx", |
| (long)memmap[SIFIVE_U_DEV_GEM].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "sifive,fu540-c000-gem"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_GEM].base, |
| 0x0, memmap[SIFIVE_U_DEV_GEM].size, |
| 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].base, |
| 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].size); |
| qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control"); |
| qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii"); |
| qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ); |
| qemu_fdt_setprop_cells(fdt, nodename, "clocks", |
| prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL); |
| qemu_fdt_setprop_string_array(fdt, nodename, "clock-names", |
| (char **)ðclk_names, ARRAY_SIZE(ethclk_names)); |
| qemu_fdt_setprop(fdt, nodename, "local-mac-address", |
| s->soc.gem.conf.macaddr.a, ETH_ALEN); |
| qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); |
| qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); |
| |
| qemu_fdt_add_subnode(fdt, "/aliases"); |
| qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename); |
| |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0", |
| (long)memmap[SIFIVE_U_DEV_GEM].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/serial@%lx", |
| (long)memmap[SIFIVE_U_DEV_UART1].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_UART1].base, |
| 0x0, memmap[SIFIVE_U_DEV_UART1].size); |
| qemu_fdt_setprop_cells(fdt, nodename, "clocks", |
| prci_phandle, PRCI_CLK_TLCLK); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART1_IRQ); |
| |
| qemu_fdt_setprop_string(fdt, "/aliases", "serial1", nodename); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/serial@%lx", |
| (long)memmap[SIFIVE_U_DEV_UART0].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[SIFIVE_U_DEV_UART0].base, |
| 0x0, memmap[SIFIVE_U_DEV_UART0].size); |
| qemu_fdt_setprop_cells(fdt, nodename, "clocks", |
| prci_phandle, PRCI_CLK_TLCLK); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ); |
| |
| qemu_fdt_add_subnode(fdt, "/chosen"); |
| qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); |
| qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename); |
| |
| g_free(nodename); |
| |
| update_bootargs: |
| if (cmdline) { |
| qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); |
| } |
| } |
| |
| static void sifive_u_machine_reset(void *opaque, int n, int level) |
| { |
| /* gpio pin active low triggers reset */ |
| if (!level) { |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| } |
| } |
| |
| static void sifive_u_machine_init(MachineState *machine) |
| { |
| const MemMapEntry *memmap = sifive_u_memmap; |
| SiFiveUState *s = RISCV_U_MACHINE(machine); |
| MemoryRegion *system_memory = get_system_memory(); |
| MemoryRegion *main_mem = g_new(MemoryRegion, 1); |
| MemoryRegion *flash0 = g_new(MemoryRegion, 1); |
| target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base; |
| target_ulong firmware_end_addr, kernel_start_addr; |
| uint32_t start_addr_hi32 = 0x00000000; |
| int i; |
| uint32_t fdt_load_addr; |
| uint64_t kernel_entry; |
| DriveInfo *dinfo; |
| DeviceState *flash_dev, *sd_dev; |
| qemu_irq flash_cs, sd_cs; |
| |
| /* Initialize SoC */ |
| object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC); |
| object_property_set_uint(OBJECT(&s->soc), "serial", s->serial, |
| &error_abort); |
| object_property_set_str(OBJECT(&s->soc), "cpu-type", machine->cpu_type, |
| &error_abort); |
| qdev_realize(DEVICE(&s->soc), NULL, &error_abort); |
| |
| /* register RAM */ |
| memory_region_init_ram(main_mem, NULL, "riscv.sifive.u.ram", |
| machine->ram_size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_DRAM].base, |
| main_mem); |
| |
| /* register QSPI0 Flash */ |
| memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0", |
| memmap[SIFIVE_U_DEV_FLASH0].size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_FLASH0].base, |
| flash0); |
| |
| /* register gpio-restart */ |
| qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10, |
| qemu_allocate_irq(sifive_u_machine_reset, NULL, 0)); |
| |
| /* create device tree */ |
| create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline, |
| riscv_is_32bit(&s->soc.u_cpus)); |
| |
| if (s->start_in_flash) { |
| /* |
| * If start_in_flash property is given, assign s->msel to a value |
| * that representing booting from QSPI0 memory-mapped flash. |
| * |
| * This also means that when both start_in_flash and msel properties |
| * are given, start_in_flash takes the precedence over msel. |
| * |
| * Note this is to keep backward compatibility not to break existing |
| * users that use start_in_flash property. |
| */ |
| s->msel = MSEL_MEMMAP_QSPI0_FLASH; |
| } |
| |
| switch (s->msel) { |
| case MSEL_MEMMAP_QSPI0_FLASH: |
| start_addr = memmap[SIFIVE_U_DEV_FLASH0].base; |
| break; |
| case MSEL_L2LIM_QSPI0_FLASH: |
| case MSEL_L2LIM_QSPI2_SD: |
| start_addr = memmap[SIFIVE_U_DEV_L2LIM].base; |
| break; |
| default: |
| start_addr = memmap[SIFIVE_U_DEV_DRAM].base; |
| break; |
| } |
| |
| if (riscv_is_32bit(&s->soc.u_cpus)) { |
| firmware_end_addr = riscv_find_and_load_firmware(machine, |
| RISCV32_BIOS_BIN, start_addr, NULL); |
| } else { |
| firmware_end_addr = riscv_find_and_load_firmware(machine, |
| RISCV64_BIOS_BIN, start_addr, NULL); |
| } |
| |
| if (machine->kernel_filename) { |
| kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus, |
| firmware_end_addr); |
| |
| kernel_entry = riscv_load_kernel(machine->kernel_filename, |
| kernel_start_addr, NULL); |
| |
| if (machine->initrd_filename) { |
| hwaddr start; |
| hwaddr end = riscv_load_initrd(machine->initrd_filename, |
| machine->ram_size, kernel_entry, |
| &start); |
| qemu_fdt_setprop_cell(s->fdt, "/chosen", |
| "linux,initrd-start", start); |
| qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end", |
| end); |
| } |
| } else { |
| /* |
| * If dynamic firmware is used, it doesn't know where is the next mode |
| * if kernel argument is not set. |
| */ |
| kernel_entry = 0; |
| } |
| |
| /* Compute the fdt load address in dram */ |
| fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base, |
| machine->ram_size, s->fdt); |
| if (!riscv_is_32bit(&s->soc.u_cpus)) { |
| start_addr_hi32 = (uint64_t)start_addr >> 32; |
| } |
| |
| /* reset vector */ |
| uint32_t reset_vec[11] = { |
| s->msel, /* MSEL pin state */ |
| 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ |
| 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */ |
| 0xf1402573, /* csrr a0, mhartid */ |
| 0, |
| 0, |
| 0x00028067, /* jr t0 */ |
| start_addr, /* start: .dword */ |
| start_addr_hi32, |
| fdt_load_addr, /* fdt_laddr: .dword */ |
| 0x00000000, |
| /* fw_dyn: */ |
| }; |
| if (riscv_is_32bit(&s->soc.u_cpus)) { |
| reset_vec[4] = 0x0202a583; /* lw a1, 32(t0) */ |
| reset_vec[5] = 0x0182a283; /* lw t0, 24(t0) */ |
| } else { |
| reset_vec[4] = 0x0202b583; /* ld a1, 32(t0) */ |
| reset_vec[5] = 0x0182b283; /* ld t0, 24(t0) */ |
| } |
| |
| |
| /* copy in the reset vector in little_endian byte order */ |
| for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { |
| reset_vec[i] = cpu_to_le32(reset_vec[i]); |
| } |
| rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), |
| memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory); |
| |
| riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base, |
| memmap[SIFIVE_U_DEV_MROM].size, |
| sizeof(reset_vec), kernel_entry); |
| |
| /* Connect an SPI flash to SPI0 */ |
| flash_dev = qdev_new("is25wp256"); |
| dinfo = drive_get_next(IF_MTD); |
| if (dinfo) { |
| qdev_prop_set_drive_err(flash_dev, "drive", |
| blk_by_legacy_dinfo(dinfo), |
| &error_fatal); |
| } |
| qdev_realize_and_unref(flash_dev, BUS(s->soc.spi0.spi), &error_fatal); |
| |
| flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs); |
| |
| /* Connect an SD card to SPI2 */ |
| sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd"); |
| |
| sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs); |
| } |
| |
| static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp) |
| { |
| SiFiveUState *s = RISCV_U_MACHINE(obj); |
| |
| return s->start_in_flash; |
| } |
| |
| static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp) |
| { |
| SiFiveUState *s = RISCV_U_MACHINE(obj); |
| |
| s->start_in_flash = value; |
| } |
| |
| static void sifive_u_machine_get_uint32_prop(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| visit_type_uint32(v, name, (uint32_t *)opaque, errp); |
| } |
| |
| static void sifive_u_machine_set_uint32_prop(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| visit_type_uint32(v, name, (uint32_t *)opaque, errp); |
| } |
| |
| static void sifive_u_machine_instance_init(Object *obj) |
| { |
| SiFiveUState *s = RISCV_U_MACHINE(obj); |
| |
| s->start_in_flash = false; |
| s->msel = 0; |
| object_property_add(obj, "msel", "uint32", |
| sifive_u_machine_get_uint32_prop, |
| sifive_u_machine_set_uint32_prop, NULL, &s->msel); |
| object_property_set_description(obj, "msel", |
| "Mode Select (MSEL[3:0]) pin state"); |
| |
| s->serial = OTP_SERIAL; |
| object_property_add(obj, "serial", "uint32", |
| sifive_u_machine_get_uint32_prop, |
| sifive_u_machine_set_uint32_prop, NULL, &s->serial); |
| object_property_set_description(obj, "serial", "Board serial number"); |
| } |
| |
| static void sifive_u_machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "RISC-V Board compatible with SiFive U SDK"; |
| mc->init = sifive_u_machine_init; |
| mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT; |
| mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1; |
| mc->default_cpu_type = SIFIVE_U_CPU; |
| mc->default_cpus = mc->min_cpus; |
| |
| object_class_property_add_bool(oc, "start-in-flash", |
| sifive_u_machine_get_start_in_flash, |
| sifive_u_machine_set_start_in_flash); |
| object_class_property_set_description(oc, "start-in-flash", |
| "Set on to tell QEMU's ROM to jump to " |
| "flash. Otherwise QEMU will jump to DRAM " |
| "or L2LIM depending on the msel value"); |
| } |
| |
| static const TypeInfo sifive_u_machine_typeinfo = { |
| .name = MACHINE_TYPE_NAME("sifive_u"), |
| .parent = TYPE_MACHINE, |
| .class_init = sifive_u_machine_class_init, |
| .instance_init = sifive_u_machine_instance_init, |
| .instance_size = sizeof(SiFiveUState), |
| }; |
| |
| static void sifive_u_machine_init_register_types(void) |
| { |
| type_register_static(&sifive_u_machine_typeinfo); |
| } |
| |
| type_init(sifive_u_machine_init_register_types) |
| |
| static void sifive_u_soc_instance_init(Object *obj) |
| { |
| SiFiveUSoCState *s = RISCV_U_SOC(obj); |
| |
| object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER); |
| qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0); |
| |
| object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus, |
| TYPE_RISCV_HART_ARRAY); |
| qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1); |
| qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0); |
| qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU); |
| qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004); |
| |
| object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER); |
| qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1); |
| |
| object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus, |
| TYPE_RISCV_HART_ARRAY); |
| |
| object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI); |
| object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP); |
| object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM); |
| object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO); |
| object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA); |
| object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI); |
| object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI); |
| } |
| |
| static void sifive_u_soc_realize(DeviceState *dev, Error **errp) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| SiFiveUSoCState *s = RISCV_U_SOC(dev); |
| const MemMapEntry *memmap = sifive_u_memmap; |
| MemoryRegion *system_memory = get_system_memory(); |
| MemoryRegion *mask_rom = g_new(MemoryRegion, 1); |
| MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1); |
| char *plic_hart_config; |
| size_t plic_hart_config_len; |
| int i; |
| NICInfo *nd = &nd_table[0]; |
| |
| qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1); |
| qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1); |
| qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", s->cpu_type); |
| qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004); |
| |
| sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort); |
| sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort); |
| /* |
| * The cluster must be realized after the RISC-V hart array container, |
| * as the container's CPU object is only created on realize, and the |
| * CPU must exist and have been parented into the cluster before the |
| * cluster is realized. |
| */ |
| qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort); |
| qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort); |
| |
| /* boot rom */ |
| memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom", |
| memmap[SIFIVE_U_DEV_MROM].size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_MROM].base, |
| mask_rom); |
| |
| /* |
| * Add L2-LIM at reset size. |
| * This should be reduced in size as the L2 Cache Controller WayEnable |
| * register is incremented. Unfortunately I don't see a nice (or any) way |
| * to handle reducing or blocking out the L2 LIM while still allowing it |
| * be re returned to all enabled after a reset. For the time being, just |
| * leave it enabled all the time. This won't break anything, but will be |
| * too generous to misbehaving guests. |
| */ |
| memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim", |
| memmap[SIFIVE_U_DEV_L2LIM].size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_L2LIM].base, |
| l2lim_mem); |
| |
| /* create PLIC hart topology configuration string */ |
| plic_hart_config_len = (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1) * |
| ms->smp.cpus; |
| plic_hart_config = g_malloc0(plic_hart_config_len); |
| for (i = 0; i < ms->smp.cpus; i++) { |
| if (i != 0) { |
| strncat(plic_hart_config, "," SIFIVE_U_PLIC_HART_CONFIG, |
| plic_hart_config_len); |
| } else { |
| strncat(plic_hart_config, "M", plic_hart_config_len); |
| } |
| plic_hart_config_len -= (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1); |
| } |
| |
| /* MMIO */ |
| s->plic = sifive_plic_create(memmap[SIFIVE_U_DEV_PLIC].base, |
| plic_hart_config, 0, |
| SIFIVE_U_PLIC_NUM_SOURCES, |
| SIFIVE_U_PLIC_NUM_PRIORITIES, |
| SIFIVE_U_PLIC_PRIORITY_BASE, |
| SIFIVE_U_PLIC_PENDING_BASE, |
| SIFIVE_U_PLIC_ENABLE_BASE, |
| SIFIVE_U_PLIC_ENABLE_STRIDE, |
| SIFIVE_U_PLIC_CONTEXT_BASE, |
| SIFIVE_U_PLIC_CONTEXT_STRIDE, |
| memmap[SIFIVE_U_DEV_PLIC].size); |
| g_free(plic_hart_config); |
| sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART0].base, |
| serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ)); |
| sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART1].base, |
| serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ)); |
| sifive_clint_create(memmap[SIFIVE_U_DEV_CLINT].base, |
| memmap[SIFIVE_U_DEV_CLINT].size, 0, ms->smp.cpus, |
| SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, |
| SIFIVE_CLINT_TIMEBASE_FREQ, false); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_DEV_PRCI].base); |
| |
| qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_DEV_GPIO].base); |
| |
| /* Pass all GPIOs to the SOC layer so they are available to the board */ |
| qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL); |
| |
| /* Connect GPIO interrupts to the PLIC */ |
| for (i = 0; i < 16; i++) { |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i, |
| qdev_get_gpio_in(DEVICE(s->plic), |
| SIFIVE_U_GPIO_IRQ0 + i)); |
| } |
| |
| /* PDMA */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_DEV_PDMA].base); |
| |
| /* Connect PDMA interrupts to the PLIC */ |
| for (i = 0; i < SIFIVE_PDMA_IRQS; i++) { |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i, |
| qdev_get_gpio_in(DEVICE(s->plic), |
| SIFIVE_U_PDMA_IRQ0 + i)); |
| } |
| |
| qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_DEV_OTP].base); |
| |
| /* FIXME use qdev NIC properties instead of nd_table[] */ |
| if (nd->used) { |
| qemu_check_nic_model(nd, TYPE_CADENCE_GEM); |
| qdev_set_nic_properties(DEVICE(&s->gem), nd); |
| } |
| object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION, |
| &error_abort); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_DEV_GEM].base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0, |
| qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ)); |
| |
| create_unimplemented_device("riscv.sifive.u.gem-mgmt", |
| memmap[SIFIVE_U_DEV_GEM_MGMT].base, memmap[SIFIVE_U_DEV_GEM_MGMT].size); |
| |
| create_unimplemented_device("riscv.sifive.u.dmc", |
| memmap[SIFIVE_U_DEV_DMC].base, memmap[SIFIVE_U_DEV_DMC].size); |
| |
| create_unimplemented_device("riscv.sifive.u.l2cc", |
| memmap[SIFIVE_U_DEV_L2CC].base, memmap[SIFIVE_U_DEV_L2CC].size); |
| |
| sysbus_realize(SYS_BUS_DEVICE(&s->spi0), errp); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi0), 0, |
| memmap[SIFIVE_U_DEV_QSPI0].base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0, |
| qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI0_IRQ)); |
| sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0, |
| memmap[SIFIVE_U_DEV_QSPI2].base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0, |
| qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI2_IRQ)); |
| } |
| |
| static Property sifive_u_soc_props[] = { |
| DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL), |
| DEFINE_PROP_STRING("cpu-type", SiFiveUSoCState, cpu_type), |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| static void sifive_u_soc_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| |
| device_class_set_props(dc, sifive_u_soc_props); |
| dc->realize = sifive_u_soc_realize; |
| /* Reason: Uses serial_hds in realize function, thus can't be used twice */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo sifive_u_soc_type_info = { |
| .name = TYPE_RISCV_U_SOC, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(SiFiveUSoCState), |
| .instance_init = sifive_u_soc_instance_init, |
| .class_init = sifive_u_soc_class_init, |
| }; |
| |
| static void sifive_u_soc_register_types(void) |
| { |
| type_register_static(&sifive_u_soc_type_info); |
| } |
| |
| type_init(sifive_u_soc_register_types) |