| /* |
| * SCSI Device emulation |
| * |
| * Copyright (c) 2006 CodeSourcery. |
| * Based on code by Fabrice Bellard |
| * |
| * Written by Paul Brook |
| * Modifications: |
| * 2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case |
| * when the allocation length of CDB is smaller |
| * than 36. |
| * 2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the |
| * MODE SENSE response. |
| * |
| * This code is licensed under the LGPL. |
| * |
| * Note that this file only handles the SCSI architecture model and device |
| * commands. Emulation of interface/link layer protocols is handled by |
| * the host adapter emulator. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/module.h" |
| #include "hw/scsi/scsi.h" |
| #include "migration/qemu-file-types.h" |
| #include "migration/vmstate.h" |
| #include "hw/scsi/emulation.h" |
| #include "scsi/constants.h" |
| #include "sysemu/block-backend.h" |
| #include "sysemu/blockdev.h" |
| #include "hw/block/block.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "sysemu/dma.h" |
| #include "sysemu/sysemu.h" |
| #include "qemu/cutils.h" |
| #include "trace.h" |
| #include "qom/object.h" |
| |
| #ifdef __linux |
| #include <scsi/sg.h> |
| #endif |
| |
| #define SCSI_WRITE_SAME_MAX (512 * KiB) |
| #define SCSI_DMA_BUF_SIZE (128 * KiB) |
| #define SCSI_MAX_INQUIRY_LEN 256 |
| #define SCSI_MAX_MODE_LEN 256 |
| |
| #define DEFAULT_DISCARD_GRANULARITY (4 * KiB) |
| #define DEFAULT_MAX_UNMAP_SIZE (1 * GiB) |
| #define DEFAULT_MAX_IO_SIZE INT_MAX /* 2 GB - 1 block */ |
| |
| #define TYPE_SCSI_DISK_BASE "scsi-disk-base" |
| |
| OBJECT_DECLARE_TYPE(SCSIDiskState, SCSIDiskClass, SCSI_DISK_BASE) |
| |
| struct SCSIDiskClass { |
| SCSIDeviceClass parent_class; |
| DMAIOFunc *dma_readv; |
| DMAIOFunc *dma_writev; |
| bool (*need_fua_emulation)(SCSICommand *cmd); |
| void (*update_sense)(SCSIRequest *r); |
| }; |
| |
| typedef struct SCSIDiskReq { |
| SCSIRequest req; |
| /* Both sector and sector_count are in terms of BDRV_SECTOR_SIZE bytes. */ |
| uint64_t sector; |
| uint32_t sector_count; |
| uint32_t buflen; |
| bool started; |
| bool need_fua_emulation; |
| struct iovec iov; |
| QEMUIOVector qiov; |
| BlockAcctCookie acct; |
| } SCSIDiskReq; |
| |
| #define SCSI_DISK_F_REMOVABLE 0 |
| #define SCSI_DISK_F_DPOFUA 1 |
| #define SCSI_DISK_F_NO_REMOVABLE_DEVOPS 2 |
| |
| struct SCSIDiskState { |
| SCSIDevice qdev; |
| uint32_t features; |
| bool media_changed; |
| bool media_event; |
| bool eject_request; |
| uint16_t port_index; |
| uint64_t max_unmap_size; |
| uint64_t max_io_size; |
| QEMUBH *bh; |
| char *version; |
| char *serial; |
| char *vendor; |
| char *product; |
| char *device_id; |
| bool tray_open; |
| bool tray_locked; |
| /* |
| * 0x0000 - rotation rate not reported |
| * 0x0001 - non-rotating medium (SSD) |
| * 0x0002-0x0400 - reserved |
| * 0x0401-0xffe - rotations per minute |
| * 0xffff - reserved |
| */ |
| uint16_t rotation_rate; |
| }; |
| |
| static void scsi_free_request(SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| |
| qemu_vfree(r->iov.iov_base); |
| } |
| |
| /* Helper function for command completion with sense. */ |
| static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense) |
| { |
| trace_scsi_disk_check_condition(r->req.tag, sense.key, sense.asc, |
| sense.ascq); |
| scsi_req_build_sense(&r->req, sense); |
| scsi_req_complete(&r->req, CHECK_CONDITION); |
| } |
| |
| static void scsi_init_iovec(SCSIDiskReq *r, size_t size) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| if (!r->iov.iov_base) { |
| r->buflen = size; |
| r->iov.iov_base = blk_blockalign(s->qdev.conf.blk, r->buflen); |
| } |
| r->iov.iov_len = MIN(r->sector_count * BDRV_SECTOR_SIZE, r->buflen); |
| qemu_iovec_init_external(&r->qiov, &r->iov, 1); |
| } |
| |
| static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| |
| qemu_put_be64s(f, &r->sector); |
| qemu_put_be32s(f, &r->sector_count); |
| qemu_put_be32s(f, &r->buflen); |
| if (r->buflen) { |
| if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { |
| qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len); |
| } else if (!req->retry) { |
| uint32_t len = r->iov.iov_len; |
| qemu_put_be32s(f, &len); |
| qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len); |
| } |
| } |
| } |
| |
| static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| |
| qemu_get_be64s(f, &r->sector); |
| qemu_get_be32s(f, &r->sector_count); |
| qemu_get_be32s(f, &r->buflen); |
| if (r->buflen) { |
| scsi_init_iovec(r, r->buflen); |
| if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { |
| qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len); |
| } else if (!r->req.retry) { |
| uint32_t len; |
| qemu_get_be32s(f, &len); |
| r->iov.iov_len = len; |
| assert(r->iov.iov_len <= r->buflen); |
| qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len); |
| } |
| } |
| |
| qemu_iovec_init_external(&r->qiov, &r->iov, 1); |
| } |
| |
| /* |
| * scsi_handle_rw_error has two return values. False means that the error |
| * must be ignored, true means that the error has been processed and the |
| * caller should not do anything else for this request. Note that |
| * scsi_handle_rw_error always manages its reference counts, independent |
| * of the return value. |
| */ |
| static bool scsi_handle_rw_error(SCSIDiskReq *r, int ret, bool acct_failed) |
| { |
| bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV); |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); |
| SCSISense sense = SENSE_CODE(NO_SENSE); |
| int error = 0; |
| bool req_has_sense = false; |
| BlockErrorAction action; |
| int status; |
| |
| if (ret < 0) { |
| status = scsi_sense_from_errno(-ret, &sense); |
| error = -ret; |
| } else { |
| /* A passthrough command has completed with nonzero status. */ |
| status = ret; |
| if (status == CHECK_CONDITION) { |
| req_has_sense = true; |
| error = scsi_sense_buf_to_errno(r->req.sense, sizeof(r->req.sense)); |
| } else { |
| error = EINVAL; |
| } |
| } |
| |
| /* |
| * Check whether the error has to be handled by the guest or should |
| * rather follow the rerror=/werror= settings. Guest-handled errors |
| * are usually retried immediately, so do not post them to QMP and |
| * do not account them as failed I/O. |
| */ |
| if (req_has_sense && |
| scsi_sense_buf_is_guest_recoverable(r->req.sense, sizeof(r->req.sense))) { |
| action = BLOCK_ERROR_ACTION_REPORT; |
| acct_failed = false; |
| } else { |
| action = blk_get_error_action(s->qdev.conf.blk, is_read, error); |
| blk_error_action(s->qdev.conf.blk, action, is_read, error); |
| } |
| |
| switch (action) { |
| case BLOCK_ERROR_ACTION_REPORT: |
| if (acct_failed) { |
| block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } |
| if (req_has_sense) { |
| sdc->update_sense(&r->req); |
| } else if (status == CHECK_CONDITION) { |
| scsi_req_build_sense(&r->req, sense); |
| } |
| scsi_req_complete(&r->req, status); |
| return true; |
| |
| case BLOCK_ERROR_ACTION_IGNORE: |
| return false; |
| |
| case BLOCK_ERROR_ACTION_STOP: |
| scsi_req_retry(&r->req); |
| return true; |
| |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static bool scsi_disk_req_check_error(SCSIDiskReq *r, int ret, bool acct_failed) |
| { |
| if (r->req.io_canceled) { |
| scsi_req_cancel_complete(&r->req); |
| return true; |
| } |
| |
| if (ret < 0) { |
| return scsi_handle_rw_error(r, ret, acct_failed); |
| } |
| |
| return false; |
| } |
| |
| static void scsi_aio_complete(void *opaque, int ret) |
| { |
| SCSIDiskReq *r = (SCSIDiskReq *)opaque; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert(r->req.aiocb != NULL); |
| r->req.aiocb = NULL; |
| aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk)); |
| if (scsi_disk_req_check_error(r, ret, true)) { |
| goto done; |
| } |
| |
| block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| scsi_req_complete(&r->req, GOOD); |
| |
| done: |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| scsi_req_unref(&r->req); |
| } |
| |
| static bool scsi_is_cmd_fua(SCSICommand *cmd) |
| { |
| switch (cmd->buf[0]) { |
| case READ_10: |
| case READ_12: |
| case READ_16: |
| case WRITE_10: |
| case WRITE_12: |
| case WRITE_16: |
| return (cmd->buf[1] & 8) != 0; |
| |
| case VERIFY_10: |
| case VERIFY_12: |
| case VERIFY_16: |
| case WRITE_VERIFY_10: |
| case WRITE_VERIFY_12: |
| case WRITE_VERIFY_16: |
| return true; |
| |
| case READ_6: |
| case WRITE_6: |
| default: |
| return false; |
| } |
| } |
| |
| static void scsi_write_do_fua(SCSIDiskReq *r) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert(r->req.aiocb == NULL); |
| assert(!r->req.io_canceled); |
| |
| if (r->need_fua_emulation) { |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, |
| BLOCK_ACCT_FLUSH); |
| r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r); |
| return; |
| } |
| |
| scsi_req_complete(&r->req, GOOD); |
| scsi_req_unref(&r->req); |
| } |
| |
| static void scsi_dma_complete_noio(SCSIDiskReq *r, int ret) |
| { |
| assert(r->req.aiocb == NULL); |
| if (scsi_disk_req_check_error(r, ret, false)) { |
| goto done; |
| } |
| |
| r->sector += r->sector_count; |
| r->sector_count = 0; |
| if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { |
| scsi_write_do_fua(r); |
| return; |
| } else { |
| scsi_req_complete(&r->req, GOOD); |
| } |
| |
| done: |
| scsi_req_unref(&r->req); |
| } |
| |
| static void scsi_dma_complete(void *opaque, int ret) |
| { |
| SCSIDiskReq *r = (SCSIDiskReq *)opaque; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert(r->req.aiocb != NULL); |
| r->req.aiocb = NULL; |
| |
| aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk)); |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } |
| scsi_dma_complete_noio(r, ret); |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| } |
| |
| static void scsi_read_complete_noio(SCSIDiskReq *r, int ret) |
| { |
| uint32_t n; |
| |
| assert(r->req.aiocb == NULL); |
| if (scsi_disk_req_check_error(r, ret, false)) { |
| goto done; |
| } |
| |
| n = r->qiov.size / BDRV_SECTOR_SIZE; |
| r->sector += n; |
| r->sector_count -= n; |
| scsi_req_data(&r->req, r->qiov.size); |
| |
| done: |
| scsi_req_unref(&r->req); |
| } |
| |
| static void scsi_read_complete(void *opaque, int ret) |
| { |
| SCSIDiskReq *r = (SCSIDiskReq *)opaque; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert(r->req.aiocb != NULL); |
| r->req.aiocb = NULL; |
| |
| aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk)); |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| trace_scsi_disk_read_complete(r->req.tag, r->qiov.size); |
| } |
| scsi_read_complete_noio(r, ret); |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| } |
| |
| /* Actually issue a read to the block device. */ |
| static void scsi_do_read(SCSIDiskReq *r, int ret) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); |
| |
| assert (r->req.aiocb == NULL); |
| if (scsi_disk_req_check_error(r, ret, false)) { |
| goto done; |
| } |
| |
| /* The request is used as the AIO opaque value, so add a ref. */ |
| scsi_req_ref(&r->req); |
| |
| if (r->req.sg) { |
| dma_acct_start(s->qdev.conf.blk, &r->acct, r->req.sg, BLOCK_ACCT_READ); |
| r->req.resid -= r->req.sg->size; |
| r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk), |
| r->req.sg, r->sector << BDRV_SECTOR_BITS, |
| BDRV_SECTOR_SIZE, |
| sdc->dma_readv, r, scsi_dma_complete, r, |
| DMA_DIRECTION_FROM_DEVICE); |
| } else { |
| scsi_init_iovec(r, SCSI_DMA_BUF_SIZE); |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, |
| r->qiov.size, BLOCK_ACCT_READ); |
| r->req.aiocb = sdc->dma_readv(r->sector << BDRV_SECTOR_BITS, &r->qiov, |
| scsi_read_complete, r, r); |
| } |
| |
| done: |
| scsi_req_unref(&r->req); |
| } |
| |
| static void scsi_do_read_cb(void *opaque, int ret) |
| { |
| SCSIDiskReq *r = (SCSIDiskReq *)opaque; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert (r->req.aiocb != NULL); |
| r->req.aiocb = NULL; |
| |
| aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk)); |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } |
| scsi_do_read(opaque, ret); |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| } |
| |
| /* Read more data from scsi device into buffer. */ |
| static void scsi_read_data(SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| bool first; |
| |
| trace_scsi_disk_read_data_count(r->sector_count); |
| if (r->sector_count == 0) { |
| /* This also clears the sense buffer for REQUEST SENSE. */ |
| scsi_req_complete(&r->req, GOOD); |
| return; |
| } |
| |
| /* No data transfer may already be in progress */ |
| assert(r->req.aiocb == NULL); |
| |
| /* The request is used as the AIO opaque value, so add a ref. */ |
| scsi_req_ref(&r->req); |
| if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { |
| trace_scsi_disk_read_data_invalid(); |
| scsi_read_complete_noio(r, -EINVAL); |
| return; |
| } |
| |
| if (!blk_is_available(req->dev->conf.blk)) { |
| scsi_read_complete_noio(r, -ENOMEDIUM); |
| return; |
| } |
| |
| first = !r->started; |
| r->started = true; |
| if (first && r->need_fua_emulation) { |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, |
| BLOCK_ACCT_FLUSH); |
| r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_do_read_cb, r); |
| } else { |
| scsi_do_read(r, 0); |
| } |
| } |
| |
| static void scsi_write_complete_noio(SCSIDiskReq *r, int ret) |
| { |
| uint32_t n; |
| |
| assert (r->req.aiocb == NULL); |
| if (scsi_disk_req_check_error(r, ret, false)) { |
| goto done; |
| } |
| |
| n = r->qiov.size / BDRV_SECTOR_SIZE; |
| r->sector += n; |
| r->sector_count -= n; |
| if (r->sector_count == 0) { |
| scsi_write_do_fua(r); |
| return; |
| } else { |
| scsi_init_iovec(r, SCSI_DMA_BUF_SIZE); |
| trace_scsi_disk_write_complete_noio(r->req.tag, r->qiov.size); |
| scsi_req_data(&r->req, r->qiov.size); |
| } |
| |
| done: |
| scsi_req_unref(&r->req); |
| } |
| |
| static void scsi_write_complete(void * opaque, int ret) |
| { |
| SCSIDiskReq *r = (SCSIDiskReq *)opaque; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert (r->req.aiocb != NULL); |
| r->req.aiocb = NULL; |
| |
| aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk)); |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| } |
| scsi_write_complete_noio(r, ret); |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| } |
| |
| static void scsi_write_data(SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); |
| |
| /* No data transfer may already be in progress */ |
| assert(r->req.aiocb == NULL); |
| |
| /* The request is used as the AIO opaque value, so add a ref. */ |
| scsi_req_ref(&r->req); |
| if (r->req.cmd.mode != SCSI_XFER_TO_DEV) { |
| trace_scsi_disk_write_data_invalid(); |
| scsi_write_complete_noio(r, -EINVAL); |
| return; |
| } |
| |
| if (!r->req.sg && !r->qiov.size) { |
| /* Called for the first time. Ask the driver to send us more data. */ |
| r->started = true; |
| scsi_write_complete_noio(r, 0); |
| return; |
| } |
| if (!blk_is_available(req->dev->conf.blk)) { |
| scsi_write_complete_noio(r, -ENOMEDIUM); |
| return; |
| } |
| |
| if (r->req.cmd.buf[0] == VERIFY_10 || r->req.cmd.buf[0] == VERIFY_12 || |
| r->req.cmd.buf[0] == VERIFY_16) { |
| if (r->req.sg) { |
| scsi_dma_complete_noio(r, 0); |
| } else { |
| scsi_write_complete_noio(r, 0); |
| } |
| return; |
| } |
| |
| if (r->req.sg) { |
| dma_acct_start(s->qdev.conf.blk, &r->acct, r->req.sg, BLOCK_ACCT_WRITE); |
| r->req.resid -= r->req.sg->size; |
| r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk), |
| r->req.sg, r->sector << BDRV_SECTOR_BITS, |
| BDRV_SECTOR_SIZE, |
| sdc->dma_writev, r, scsi_dma_complete, r, |
| DMA_DIRECTION_TO_DEVICE); |
| } else { |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, |
| r->qiov.size, BLOCK_ACCT_WRITE); |
| r->req.aiocb = sdc->dma_writev(r->sector << BDRV_SECTOR_BITS, &r->qiov, |
| scsi_write_complete, r, r); |
| } |
| } |
| |
| /* Return a pointer to the data buffer. */ |
| static uint8_t *scsi_get_buf(SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| |
| return (uint8_t *)r->iov.iov_base; |
| } |
| |
| static int scsi_disk_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| uint8_t page_code = req->cmd.buf[2]; |
| int start, buflen = 0; |
| |
| outbuf[buflen++] = s->qdev.type & 0x1f; |
| outbuf[buflen++] = page_code; |
| outbuf[buflen++] = 0x00; |
| outbuf[buflen++] = 0x00; |
| start = buflen; |
| |
| switch (page_code) { |
| case 0x00: /* Supported page codes, mandatory */ |
| { |
| trace_scsi_disk_emulate_vpd_page_00(req->cmd.xfer); |
| outbuf[buflen++] = 0x00; /* list of supported pages (this page) */ |
| if (s->serial) { |
| outbuf[buflen++] = 0x80; /* unit serial number */ |
| } |
| outbuf[buflen++] = 0x83; /* device identification */ |
| if (s->qdev.type == TYPE_DISK) { |
| outbuf[buflen++] = 0xb0; /* block limits */ |
| outbuf[buflen++] = 0xb1; /* block device characteristics */ |
| outbuf[buflen++] = 0xb2; /* thin provisioning */ |
| } |
| break; |
| } |
| case 0x80: /* Device serial number, optional */ |
| { |
| int l; |
| |
| if (!s->serial) { |
| trace_scsi_disk_emulate_vpd_page_80_not_supported(); |
| return -1; |
| } |
| |
| l = strlen(s->serial); |
| if (l > 36) { |
| l = 36; |
| } |
| |
| trace_scsi_disk_emulate_vpd_page_80(req->cmd.xfer); |
| memcpy(outbuf + buflen, s->serial, l); |
| buflen += l; |
| break; |
| } |
| |
| case 0x83: /* Device identification page, mandatory */ |
| { |
| int id_len = s->device_id ? MIN(strlen(s->device_id), 255 - 8) : 0; |
| |
| trace_scsi_disk_emulate_vpd_page_83(req->cmd.xfer); |
| |
| if (id_len) { |
| outbuf[buflen++] = 0x2; /* ASCII */ |
| outbuf[buflen++] = 0; /* not officially assigned */ |
| outbuf[buflen++] = 0; /* reserved */ |
| outbuf[buflen++] = id_len; /* length of data following */ |
| memcpy(outbuf + buflen, s->device_id, id_len); |
| buflen += id_len; |
| } |
| |
| if (s->qdev.wwn) { |
| outbuf[buflen++] = 0x1; /* Binary */ |
| outbuf[buflen++] = 0x3; /* NAA */ |
| outbuf[buflen++] = 0; /* reserved */ |
| outbuf[buflen++] = 8; |
| stq_be_p(&outbuf[buflen], s->qdev.wwn); |
| buflen += 8; |
| } |
| |
| if (s->qdev.port_wwn) { |
| outbuf[buflen++] = 0x61; /* SAS / Binary */ |
| outbuf[buflen++] = 0x93; /* PIV / Target port / NAA */ |
| outbuf[buflen++] = 0; /* reserved */ |
| outbuf[buflen++] = 8; |
| stq_be_p(&outbuf[buflen], s->qdev.port_wwn); |
| buflen += 8; |
| } |
| |
| if (s->port_index) { |
| outbuf[buflen++] = 0x61; /* SAS / Binary */ |
| |
| /* PIV/Target port/relative target port */ |
| outbuf[buflen++] = 0x94; |
| |
| outbuf[buflen++] = 0; /* reserved */ |
| outbuf[buflen++] = 4; |
| stw_be_p(&outbuf[buflen + 2], s->port_index); |
| buflen += 4; |
| } |
| break; |
| } |
| case 0xb0: /* block limits */ |
| { |
| SCSIBlockLimits bl = {}; |
| |
| if (s->qdev.type == TYPE_ROM) { |
| trace_scsi_disk_emulate_vpd_page_b0_not_supported(); |
| return -1; |
| } |
| bl.wsnz = 1; |
| bl.unmap_sectors = |
| s->qdev.conf.discard_granularity / s->qdev.blocksize; |
| bl.min_io_size = |
| s->qdev.conf.min_io_size / s->qdev.blocksize; |
| bl.opt_io_size = |
| s->qdev.conf.opt_io_size / s->qdev.blocksize; |
| bl.max_unmap_sectors = |
| s->max_unmap_size / s->qdev.blocksize; |
| bl.max_io_sectors = |
| s->max_io_size / s->qdev.blocksize; |
| /* 255 descriptors fit in 4 KiB with an 8-byte header */ |
| bl.max_unmap_descr = 255; |
| |
| if (s->qdev.type == TYPE_DISK) { |
| int max_transfer_blk = blk_get_max_transfer(s->qdev.conf.blk); |
| int max_io_sectors_blk = |
| max_transfer_blk / s->qdev.blocksize; |
| |
| bl.max_io_sectors = |
| MIN_NON_ZERO(max_io_sectors_blk, bl.max_io_sectors); |
| } |
| buflen += scsi_emulate_block_limits(outbuf + buflen, &bl); |
| break; |
| } |
| case 0xb1: /* block device characteristics */ |
| { |
| buflen = 0x40; |
| outbuf[4] = (s->rotation_rate >> 8) & 0xff; |
| outbuf[5] = s->rotation_rate & 0xff; |
| outbuf[6] = 0; /* PRODUCT TYPE */ |
| outbuf[7] = 0; /* WABEREQ | WACEREQ | NOMINAL FORM FACTOR */ |
| outbuf[8] = 0; /* VBULS */ |
| break; |
| } |
| case 0xb2: /* thin provisioning */ |
| { |
| buflen = 8; |
| outbuf[4] = 0; |
| outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */ |
| outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1; |
| outbuf[7] = 0; |
| break; |
| } |
| default: |
| return -1; |
| } |
| /* done with EVPD */ |
| assert(buflen - start <= 255); |
| outbuf[start - 1] = buflen - start; |
| return buflen; |
| } |
| |
| static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| int buflen = 0; |
| |
| if (req->cmd.buf[1] & 0x1) { |
| /* Vital product data */ |
| return scsi_disk_emulate_vpd_page(req, outbuf); |
| } |
| |
| /* Standard INQUIRY data */ |
| if (req->cmd.buf[2] != 0) { |
| return -1; |
| } |
| |
| /* PAGE CODE == 0 */ |
| buflen = req->cmd.xfer; |
| if (buflen > SCSI_MAX_INQUIRY_LEN) { |
| buflen = SCSI_MAX_INQUIRY_LEN; |
| } |
| |
| outbuf[0] = s->qdev.type & 0x1f; |
| outbuf[1] = (s->features & (1 << SCSI_DISK_F_REMOVABLE)) ? 0x80 : 0; |
| |
| strpadcpy((char *) &outbuf[16], 16, s->product, ' '); |
| strpadcpy((char *) &outbuf[8], 8, s->vendor, ' '); |
| |
| memset(&outbuf[32], 0, 4); |
| memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version))); |
| /* |
| * We claim conformance to SPC-3, which is required for guests |
| * to ask for modern features like READ CAPACITY(16) or the |
| * block characteristics VPD page by default. Not all of SPC-3 |
| * is actually implemented, but we're good enough. |
| */ |
| outbuf[2] = s->qdev.default_scsi_version; |
| outbuf[3] = 2 | 0x10; /* Format 2, HiSup */ |
| |
| if (buflen > 36) { |
| outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */ |
| } else { |
| /* If the allocation length of CDB is too small, |
| the additional length is not adjusted */ |
| outbuf[4] = 36 - 5; |
| } |
| |
| /* Sync data transfer and TCQ. */ |
| outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0); |
| return buflen; |
| } |
| |
| static inline bool media_is_dvd(SCSIDiskState *s) |
| { |
| uint64_t nb_sectors; |
| if (s->qdev.type != TYPE_ROM) { |
| return false; |
| } |
| if (!blk_is_available(s->qdev.conf.blk)) { |
| return false; |
| } |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| return nb_sectors > CD_MAX_SECTORS; |
| } |
| |
| static inline bool media_is_cd(SCSIDiskState *s) |
| { |
| uint64_t nb_sectors; |
| if (s->qdev.type != TYPE_ROM) { |
| return false; |
| } |
| if (!blk_is_available(s->qdev.conf.blk)) { |
| return false; |
| } |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| return nb_sectors <= CD_MAX_SECTORS; |
| } |
| |
| static int scsi_read_disc_information(SCSIDiskState *s, SCSIDiskReq *r, |
| uint8_t *outbuf) |
| { |
| uint8_t type = r->req.cmd.buf[1] & 7; |
| |
| if (s->qdev.type != TYPE_ROM) { |
| return -1; |
| } |
| |
| /* Types 1/2 are only defined for Blu-Ray. */ |
| if (type != 0) { |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| return -1; |
| } |
| |
| memset(outbuf, 0, 34); |
| outbuf[1] = 32; |
| outbuf[2] = 0xe; /* last session complete, disc finalized */ |
| outbuf[3] = 1; /* first track on disc */ |
| outbuf[4] = 1; /* # of sessions */ |
| outbuf[5] = 1; /* first track of last session */ |
| outbuf[6] = 1; /* last track of last session */ |
| outbuf[7] = 0x20; /* unrestricted use */ |
| outbuf[8] = 0x00; /* CD-ROM or DVD-ROM */ |
| /* 9-10-11: most significant byte corresponding bytes 4-5-6 */ |
| /* 12-23: not meaningful for CD-ROM or DVD-ROM */ |
| /* 24-31: disc bar code */ |
| /* 32: disc application code */ |
| /* 33: number of OPC tables */ |
| |
| return 34; |
| } |
| |
| static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r, |
| uint8_t *outbuf) |
| { |
| static const int rds_caps_size[5] = { |
| [0] = 2048 + 4, |
| [1] = 4 + 4, |
| [3] = 188 + 4, |
| [4] = 2048 + 4, |
| }; |
| |
| uint8_t media = r->req.cmd.buf[1]; |
| uint8_t layer = r->req.cmd.buf[6]; |
| uint8_t format = r->req.cmd.buf[7]; |
| int size = -1; |
| |
| if (s->qdev.type != TYPE_ROM) { |
| return -1; |
| } |
| if (media != 0) { |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| return -1; |
| } |
| |
| if (format != 0xff) { |
| if (!blk_is_available(s->qdev.conf.blk)) { |
| scsi_check_condition(r, SENSE_CODE(NO_MEDIUM)); |
| return -1; |
| } |
| if (media_is_cd(s)) { |
| scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT)); |
| return -1; |
| } |
| if (format >= ARRAY_SIZE(rds_caps_size)) { |
| return -1; |
| } |
| size = rds_caps_size[format]; |
| memset(outbuf, 0, size); |
| } |
| |
| switch (format) { |
| case 0x00: { |
| /* Physical format information */ |
| uint64_t nb_sectors; |
| if (layer != 0) { |
| goto fail; |
| } |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| |
| outbuf[4] = 1; /* DVD-ROM, part version 1 */ |
| outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ |
| outbuf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ |
| outbuf[7] = 0; /* default densities */ |
| |
| stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */ |
| stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */ |
| break; |
| } |
| |
| case 0x01: /* DVD copyright information, all zeros */ |
| break; |
| |
| case 0x03: /* BCA information - invalid field for no BCA info */ |
| return -1; |
| |
| case 0x04: /* DVD disc manufacturing information, all zeros */ |
| break; |
| |
| case 0xff: { /* List capabilities */ |
| int i; |
| size = 4; |
| for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) { |
| if (!rds_caps_size[i]) { |
| continue; |
| } |
| outbuf[size] = i; |
| outbuf[size + 1] = 0x40; /* Not writable, readable */ |
| stw_be_p(&outbuf[size + 2], rds_caps_size[i]); |
| size += 4; |
| } |
| break; |
| } |
| |
| default: |
| return -1; |
| } |
| |
| /* Size of buffer, not including 2 byte size field */ |
| stw_be_p(outbuf, size - 2); |
| return size; |
| |
| fail: |
| return -1; |
| } |
| |
| static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf) |
| { |
| uint8_t event_code, media_status; |
| |
| media_status = 0; |
| if (s->tray_open) { |
| media_status = MS_TRAY_OPEN; |
| } else if (blk_is_inserted(s->qdev.conf.blk)) { |
| media_status = MS_MEDIA_PRESENT; |
| } |
| |
| /* Event notification descriptor */ |
| event_code = MEC_NO_CHANGE; |
| if (media_status != MS_TRAY_OPEN) { |
| if (s->media_event) { |
| event_code = MEC_NEW_MEDIA; |
| s->media_event = false; |
| } else if (s->eject_request) { |
| event_code = MEC_EJECT_REQUESTED; |
| s->eject_request = false; |
| } |
| } |
| |
| outbuf[0] = event_code; |
| outbuf[1] = media_status; |
| |
| /* These fields are reserved, just clear them. */ |
| outbuf[2] = 0; |
| outbuf[3] = 0; |
| return 4; |
| } |
| |
| static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r, |
| uint8_t *outbuf) |
| { |
| int size; |
| uint8_t *buf = r->req.cmd.buf; |
| uint8_t notification_class_request = buf[4]; |
| if (s->qdev.type != TYPE_ROM) { |
| return -1; |
| } |
| if ((buf[1] & 1) == 0) { |
| /* asynchronous */ |
| return -1; |
| } |
| |
| size = 4; |
| outbuf[0] = outbuf[1] = 0; |
| outbuf[3] = 1 << GESN_MEDIA; /* supported events */ |
| if (notification_class_request & (1 << GESN_MEDIA)) { |
| outbuf[2] = GESN_MEDIA; |
| size += scsi_event_status_media(s, &outbuf[size]); |
| } else { |
| outbuf[2] = 0x80; |
| } |
| stw_be_p(outbuf, size - 4); |
| return size; |
| } |
| |
| static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf) |
| { |
| int current; |
| |
| if (s->qdev.type != TYPE_ROM) { |
| return -1; |
| } |
| |
| if (media_is_dvd(s)) { |
| current = MMC_PROFILE_DVD_ROM; |
| } else if (media_is_cd(s)) { |
| current = MMC_PROFILE_CD_ROM; |
| } else { |
| current = MMC_PROFILE_NONE; |
| } |
| |
| memset(outbuf, 0, 40); |
| stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */ |
| stw_be_p(&outbuf[6], current); |
| /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */ |
| outbuf[10] = 0x03; /* persistent, current */ |
| outbuf[11] = 8; /* two profiles */ |
| stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM); |
| outbuf[14] = (current == MMC_PROFILE_DVD_ROM); |
| stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM); |
| outbuf[18] = (current == MMC_PROFILE_CD_ROM); |
| /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */ |
| stw_be_p(&outbuf[20], 1); |
| outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */ |
| outbuf[23] = 8; |
| stl_be_p(&outbuf[24], 1); /* SCSI */ |
| outbuf[28] = 1; /* DBE = 1, mandatory */ |
| /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */ |
| stw_be_p(&outbuf[32], 3); |
| outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */ |
| outbuf[35] = 4; |
| outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */ |
| /* TODO: Random readable, CD read, DVD read, drive serial number, |
| power management */ |
| return 40; |
| } |
| |
| static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf) |
| { |
| if (s->qdev.type != TYPE_ROM) { |
| return -1; |
| } |
| memset(outbuf, 0, 8); |
| outbuf[5] = 1; /* CD-ROM */ |
| return 8; |
| } |
| |
| static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf, |
| int page_control) |
| { |
| static const int mode_sense_valid[0x3f] = { |
| [MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK), |
| [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK), |
| [MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM), |
| [MODE_PAGE_R_W_ERROR] = (1 << TYPE_DISK) | (1 << TYPE_ROM), |
| [MODE_PAGE_AUDIO_CTL] = (1 << TYPE_ROM), |
| [MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM), |
| }; |
| |
| uint8_t *p = *p_outbuf + 2; |
| int length; |
| |
| if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) { |
| return -1; |
| } |
| |
| /* |
| * If Changeable Values are requested, a mask denoting those mode parameters |
| * that are changeable shall be returned. As we currently don't support |
| * parameter changes via MODE_SELECT all bits are returned set to zero. |
| * The buffer was already menset to zero by the caller of this function. |
| * |
| * The offsets here are off by two compared to the descriptions in the |
| * SCSI specs, because those include a 2-byte header. This is unfortunate, |
| * but it is done so that offsets are consistent within our implementation |
| * of MODE SENSE and MODE SELECT. MODE SELECT has to deal with both |
| * 2-byte and 4-byte headers. |
| */ |
| switch (page) { |
| case MODE_PAGE_HD_GEOMETRY: |
| length = 0x16; |
| if (page_control == 1) { /* Changeable Values */ |
| break; |
| } |
| /* if a geometry hint is available, use it */ |
| p[0] = (s->qdev.conf.cyls >> 16) & 0xff; |
| p[1] = (s->qdev.conf.cyls >> 8) & 0xff; |
| p[2] = s->qdev.conf.cyls & 0xff; |
| p[3] = s->qdev.conf.heads & 0xff; |
| /* Write precomp start cylinder, disabled */ |
| p[4] = (s->qdev.conf.cyls >> 16) & 0xff; |
| p[5] = (s->qdev.conf.cyls >> 8) & 0xff; |
| p[6] = s->qdev.conf.cyls & 0xff; |
| /* Reduced current start cylinder, disabled */ |
| p[7] = (s->qdev.conf.cyls >> 16) & 0xff; |
| p[8] = (s->qdev.conf.cyls >> 8) & 0xff; |
| p[9] = s->qdev.conf.cyls & 0xff; |
| /* Device step rate [ns], 200ns */ |
| p[10] = 0; |
| p[11] = 200; |
| /* Landing zone cylinder */ |
| p[12] = 0xff; |
| p[13] = 0xff; |
| p[14] = 0xff; |
| /* Medium rotation rate [rpm], 5400 rpm */ |
| p[18] = (5400 >> 8) & 0xff; |
| p[19] = 5400 & 0xff; |
| break; |
| |
| case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY: |
| length = 0x1e; |
| if (page_control == 1) { /* Changeable Values */ |
| break; |
| } |
| /* Transfer rate [kbit/s], 5Mbit/s */ |
| p[0] = 5000 >> 8; |
| p[1] = 5000 & 0xff; |
| /* if a geometry hint is available, use it */ |
| p[2] = s->qdev.conf.heads & 0xff; |
| p[3] = s->qdev.conf.secs & 0xff; |
| p[4] = s->qdev.blocksize >> 8; |
| p[6] = (s->qdev.conf.cyls >> 8) & 0xff; |
| p[7] = s->qdev.conf.cyls & 0xff; |
| /* Write precomp start cylinder, disabled */ |
| p[8] = (s->qdev.conf.cyls >> 8) & 0xff; |
| p[9] = s->qdev.conf.cyls & 0xff; |
| /* Reduced current start cylinder, disabled */ |
| p[10] = (s->qdev.conf.cyls >> 8) & 0xff; |
| p[11] = s->qdev.conf.cyls & 0xff; |
| /* Device step rate [100us], 100us */ |
| p[12] = 0; |
| p[13] = 1; |
| /* Device step pulse width [us], 1us */ |
| p[14] = 1; |
| /* Device head settle delay [100us], 100us */ |
| p[15] = 0; |
| p[16] = 1; |
| /* Motor on delay [0.1s], 0.1s */ |
| p[17] = 1; |
| /* Motor off delay [0.1s], 0.1s */ |
| p[18] = 1; |
| /* Medium rotation rate [rpm], 5400 rpm */ |
| p[26] = (5400 >> 8) & 0xff; |
| p[27] = 5400 & 0xff; |
| break; |
| |
| case MODE_PAGE_CACHING: |
| length = 0x12; |
| if (page_control == 1 || /* Changeable Values */ |
| blk_enable_write_cache(s->qdev.conf.blk)) { |
| p[0] = 4; /* WCE */ |
| } |
| break; |
| |
| case MODE_PAGE_R_W_ERROR: |
| length = 10; |
| if (page_control == 1) { /* Changeable Values */ |
| break; |
| } |
| p[0] = 0x80; /* Automatic Write Reallocation Enabled */ |
| if (s->qdev.type == TYPE_ROM) { |
| p[1] = 0x20; /* Read Retry Count */ |
| } |
| break; |
| |
| case MODE_PAGE_AUDIO_CTL: |
| length = 14; |
| break; |
| |
| case MODE_PAGE_CAPABILITIES: |
| length = 0x14; |
| if (page_control == 1) { /* Changeable Values */ |
| break; |
| } |
| |
| p[0] = 0x3b; /* CD-R & CD-RW read */ |
| p[1] = 0; /* Writing not supported */ |
| p[2] = 0x7f; /* Audio, composite, digital out, |
| mode 2 form 1&2, multi session */ |
| p[3] = 0xff; /* CD DA, DA accurate, RW supported, |
| RW corrected, C2 errors, ISRC, |
| UPC, Bar code */ |
| p[4] = 0x2d | (s->tray_locked ? 2 : 0); |
| /* Locking supported, jumper present, eject, tray */ |
| p[5] = 0; /* no volume & mute control, no |
| changer */ |
| p[6] = (50 * 176) >> 8; /* 50x read speed */ |
| p[7] = (50 * 176) & 0xff; |
| p[8] = 2 >> 8; /* Two volume levels */ |
| p[9] = 2 & 0xff; |
| p[10] = 2048 >> 8; /* 2M buffer */ |
| p[11] = 2048 & 0xff; |
| p[12] = (16 * 176) >> 8; /* 16x read speed current */ |
| p[13] = (16 * 176) & 0xff; |
| p[16] = (16 * 176) >> 8; /* 16x write speed */ |
| p[17] = (16 * 176) & 0xff; |
| p[18] = (16 * 176) >> 8; /* 16x write speed current */ |
| p[19] = (16 * 176) & 0xff; |
| break; |
| |
| default: |
| return -1; |
| } |
| |
| assert(length < 256); |
| (*p_outbuf)[0] = page; |
| (*p_outbuf)[1] = length; |
| *p_outbuf += length + 2; |
| return length + 2; |
| } |
| |
| static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| uint64_t nb_sectors; |
| bool dbd; |
| int page, buflen, ret, page_control; |
| uint8_t *p; |
| uint8_t dev_specific_param; |
| |
| dbd = (r->req.cmd.buf[1] & 0x8) != 0; |
| page = r->req.cmd.buf[2] & 0x3f; |
| page_control = (r->req.cmd.buf[2] & 0xc0) >> 6; |
| |
| trace_scsi_disk_emulate_mode_sense((r->req.cmd.buf[0] == MODE_SENSE) ? 6 : |
| 10, page, r->req.cmd.xfer, page_control); |
| memset(outbuf, 0, r->req.cmd.xfer); |
| p = outbuf; |
| |
| if (s->qdev.type == TYPE_DISK) { |
| dev_specific_param = s->features & (1 << SCSI_DISK_F_DPOFUA) ? 0x10 : 0; |
| if (!blk_is_writable(s->qdev.conf.blk)) { |
| dev_specific_param |= 0x80; /* Readonly. */ |
| } |
| } else { |
| /* MMC prescribes that CD/DVD drives have no block descriptors, |
| * and defines no device-specific parameter. */ |
| dev_specific_param = 0x00; |
| dbd = true; |
| } |
| |
| if (r->req.cmd.buf[0] == MODE_SENSE) { |
| p[1] = 0; /* Default media type. */ |
| p[2] = dev_specific_param; |
| p[3] = 0; /* Block descriptor length. */ |
| p += 4; |
| } else { /* MODE_SENSE_10 */ |
| p[2] = 0; /* Default media type. */ |
| p[3] = dev_specific_param; |
| p[6] = p[7] = 0; /* Block descriptor length. */ |
| p += 8; |
| } |
| |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| if (!dbd && nb_sectors) { |
| if (r->req.cmd.buf[0] == MODE_SENSE) { |
| outbuf[3] = 8; /* Block descriptor length */ |
| } else { /* MODE_SENSE_10 */ |
| outbuf[7] = 8; /* Block descriptor length */ |
| } |
| nb_sectors /= (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| if (nb_sectors > 0xffffff) { |
| nb_sectors = 0; |
| } |
| p[0] = 0; /* media density code */ |
| p[1] = (nb_sectors >> 16) & 0xff; |
| p[2] = (nb_sectors >> 8) & 0xff; |
| p[3] = nb_sectors & 0xff; |
| p[4] = 0; /* reserved */ |
| p[5] = 0; /* bytes 5-7 are the sector size in bytes */ |
| p[6] = s->qdev.blocksize >> 8; |
| p[7] = 0; |
| p += 8; |
| } |
| |
| if (page_control == 3) { |
| /* Saved Values */ |
| scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED)); |
| return -1; |
| } |
| |
| if (page == 0x3f) { |
| for (page = 0; page <= 0x3e; page++) { |
| mode_sense_page(s, page, &p, page_control); |
| } |
| } else { |
| ret = mode_sense_page(s, page, &p, page_control); |
| if (ret == -1) { |
| return -1; |
| } |
| } |
| |
| buflen = p - outbuf; |
| /* |
| * The mode data length field specifies the length in bytes of the |
| * following data that is available to be transferred. The mode data |
| * length does not include itself. |
| */ |
| if (r->req.cmd.buf[0] == MODE_SENSE) { |
| outbuf[0] = buflen - 1; |
| } else { /* MODE_SENSE_10 */ |
| outbuf[0] = ((buflen - 2) >> 8) & 0xff; |
| outbuf[1] = (buflen - 2) & 0xff; |
| } |
| return buflen; |
| } |
| |
| static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| int start_track, format, msf, toclen; |
| uint64_t nb_sectors; |
| |
| msf = req->cmd.buf[1] & 2; |
| format = req->cmd.buf[2] & 0xf; |
| start_track = req->cmd.buf[6]; |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| trace_scsi_disk_emulate_read_toc(start_track, format, msf >> 1); |
| nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; |
| switch (format) { |
| case 0: |
| toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track); |
| break; |
| case 1: |
| /* multi session : only a single session defined */ |
| toclen = 12; |
| memset(outbuf, 0, 12); |
| outbuf[1] = 0x0a; |
| outbuf[2] = 0x01; |
| outbuf[3] = 0x01; |
| break; |
| case 2: |
| toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track); |
| break; |
| default: |
| return -1; |
| } |
| return toclen; |
| } |
| |
| static int scsi_disk_emulate_start_stop(SCSIDiskReq *r) |
| { |
| SCSIRequest *req = &r->req; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| bool start = req->cmd.buf[4] & 1; |
| bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */ |
| int pwrcnd = req->cmd.buf[4] & 0xf0; |
| |
| if (pwrcnd) { |
| /* eject/load only happens for power condition == 0 */ |
| return 0; |
| } |
| |
| if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && loej) { |
| if (!start && !s->tray_open && s->tray_locked) { |
| scsi_check_condition(r, |
| blk_is_inserted(s->qdev.conf.blk) |
| ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED) |
| : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED)); |
| return -1; |
| } |
| |
| if (s->tray_open != !start) { |
| blk_eject(s->qdev.conf.blk, !start); |
| s->tray_open = !start; |
| } |
| } |
| return 0; |
| } |
| |
| static void scsi_disk_emulate_read_data(SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| int buflen = r->iov.iov_len; |
| |
| if (buflen) { |
| trace_scsi_disk_emulate_read_data(buflen); |
| r->iov.iov_len = 0; |
| r->started = true; |
| scsi_req_data(&r->req, buflen); |
| return; |
| } |
| |
| /* This also clears the sense buffer for REQUEST SENSE. */ |
| scsi_req_complete(&r->req, GOOD); |
| } |
| |
| static int scsi_disk_check_mode_select(SCSIDiskState *s, int page, |
| uint8_t *inbuf, int inlen) |
| { |
| uint8_t mode_current[SCSI_MAX_MODE_LEN]; |
| uint8_t mode_changeable[SCSI_MAX_MODE_LEN]; |
| uint8_t *p; |
| int len, expected_len, changeable_len, i; |
| |
| /* The input buffer does not include the page header, so it is |
| * off by 2 bytes. |
| */ |
| expected_len = inlen + 2; |
| if (expected_len > SCSI_MAX_MODE_LEN) { |
| return -1; |
| } |
| |
| p = mode_current; |
| memset(mode_current, 0, inlen + 2); |
| len = mode_sense_page(s, page, &p, 0); |
| if (len < 0 || len != expected_len) { |
| return -1; |
| } |
| |
| p = mode_changeable; |
| memset(mode_changeable, 0, inlen + 2); |
| changeable_len = mode_sense_page(s, page, &p, 1); |
| assert(changeable_len == len); |
| |
| /* Check that unchangeable bits are the same as what MODE SENSE |
| * would return. |
| */ |
| for (i = 2; i < len; i++) { |
| if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) { |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| static void scsi_disk_apply_mode_select(SCSIDiskState *s, int page, uint8_t *p) |
| { |
| switch (page) { |
| case MODE_PAGE_CACHING: |
| blk_set_enable_write_cache(s->qdev.conf.blk, (p[0] & 4) != 0); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static int mode_select_pages(SCSIDiskReq *r, uint8_t *p, int len, bool change) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| while (len > 0) { |
| int page, subpage, page_len; |
| |
| /* Parse both possible formats for the mode page headers. */ |
| page = p[0] & 0x3f; |
| if (p[0] & 0x40) { |
| if (len < 4) { |
| goto invalid_param_len; |
| } |
| subpage = p[1]; |
| page_len = lduw_be_p(&p[2]); |
| p += 4; |
| len -= 4; |
| } else { |
| if (len < 2) { |
| goto invalid_param_len; |
| } |
| subpage = 0; |
| page_len = p[1]; |
| p += 2; |
| len -= 2; |
| } |
| |
| if (subpage) { |
| goto invalid_param; |
| } |
| if (page_len > len) { |
| goto invalid_param_len; |
| } |
| |
| if (!change) { |
| if (scsi_disk_check_mode_select(s, page, p, page_len) < 0) { |
| goto invalid_param; |
| } |
| } else { |
| scsi_disk_apply_mode_select(s, page, p); |
| } |
| |
| p += page_len; |
| len -= page_len; |
| } |
| return 0; |
| |
| invalid_param: |
| scsi_check_condition(r, SENSE_CODE(INVALID_PARAM)); |
| return -1; |
| |
| invalid_param_len: |
| scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN)); |
| return -1; |
| } |
| |
| static void scsi_disk_emulate_mode_select(SCSIDiskReq *r, uint8_t *inbuf) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| uint8_t *p = inbuf; |
| int cmd = r->req.cmd.buf[0]; |
| int len = r->req.cmd.xfer; |
| int hdr_len = (cmd == MODE_SELECT ? 4 : 8); |
| int bd_len; |
| int pass; |
| |
| /* We only support PF=1, SP=0. */ |
| if ((r->req.cmd.buf[1] & 0x11) != 0x10) { |
| goto invalid_field; |
| } |
| |
| if (len < hdr_len) { |
| goto invalid_param_len; |
| } |
| |
| bd_len = (cmd == MODE_SELECT ? p[3] : lduw_be_p(&p[6])); |
| len -= hdr_len; |
| p += hdr_len; |
| if (len < bd_len) { |
| goto invalid_param_len; |
| } |
| if (bd_len != 0 && bd_len != 8) { |
| goto invalid_param; |
| } |
| |
| len -= bd_len; |
| p += bd_len; |
| |
| /* Ensure no change is made if there is an error! */ |
| for (pass = 0; pass < 2; pass++) { |
| if (mode_select_pages(r, p, len, pass == 1) < 0) { |
| assert(pass == 0); |
| return; |
| } |
| } |
| if (!blk_enable_write_cache(s->qdev.conf.blk)) { |
| /* The request is used as the AIO opaque value, so add a ref. */ |
| scsi_req_ref(&r->req); |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, |
| BLOCK_ACCT_FLUSH); |
| r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r); |
| return; |
| } |
| |
| scsi_req_complete(&r->req, GOOD); |
| return; |
| |
| invalid_param: |
| scsi_check_condition(r, SENSE_CODE(INVALID_PARAM)); |
| return; |
| |
| invalid_param_len: |
| scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN)); |
| return; |
| |
| invalid_field: |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| } |
| |
| static inline bool check_lba_range(SCSIDiskState *s, |
| uint64_t sector_num, uint32_t nb_sectors) |
| { |
| /* |
| * The first line tests that no overflow happens when computing the last |
| * sector. The second line tests that the last accessed sector is in |
| * range. |
| * |
| * Careful, the computations should not underflow for nb_sectors == 0, |
| * and a 0-block read to the first LBA beyond the end of device is |
| * valid. |
| */ |
| return (sector_num <= sector_num + nb_sectors && |
| sector_num + nb_sectors <= s->qdev.max_lba + 1); |
| } |
| |
| typedef struct UnmapCBData { |
| SCSIDiskReq *r; |
| uint8_t *inbuf; |
| int count; |
| } UnmapCBData; |
| |
| static void scsi_unmap_complete(void *opaque, int ret); |
| |
| static void scsi_unmap_complete_noio(UnmapCBData *data, int ret) |
| { |
| SCSIDiskReq *r = data->r; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert(r->req.aiocb == NULL); |
| |
| if (data->count > 0) { |
| r->sector = ldq_be_p(&data->inbuf[0]) |
| * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| r->sector_count = (ldl_be_p(&data->inbuf[8]) & 0xffffffffULL) |
| * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| if (!check_lba_range(s, r->sector, r->sector_count)) { |
| block_acct_invalid(blk_get_stats(s->qdev.conf.blk), |
| BLOCK_ACCT_UNMAP); |
| scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); |
| goto done; |
| } |
| |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, |
| r->sector_count * BDRV_SECTOR_SIZE, |
| BLOCK_ACCT_UNMAP); |
| |
| r->req.aiocb = blk_aio_pdiscard(s->qdev.conf.blk, |
| r->sector * BDRV_SECTOR_SIZE, |
| r->sector_count * BDRV_SECTOR_SIZE, |
| scsi_unmap_complete, data); |
| data->count--; |
| data->inbuf += 16; |
| return; |
| } |
| |
| scsi_req_complete(&r->req, GOOD); |
| |
| done: |
| scsi_req_unref(&r->req); |
| g_free(data); |
| } |
| |
| static void scsi_unmap_complete(void *opaque, int ret) |
| { |
| UnmapCBData *data = opaque; |
| SCSIDiskReq *r = data->r; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert(r->req.aiocb != NULL); |
| r->req.aiocb = NULL; |
| |
| aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk)); |
| if (scsi_disk_req_check_error(r, ret, true)) { |
| scsi_req_unref(&r->req); |
| g_free(data); |
| } else { |
| block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| scsi_unmap_complete_noio(data, ret); |
| } |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| } |
| |
| static void scsi_disk_emulate_unmap(SCSIDiskReq *r, uint8_t *inbuf) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| uint8_t *p = inbuf; |
| int len = r->req.cmd.xfer; |
| UnmapCBData *data; |
| |
| /* Reject ANCHOR=1. */ |
| if (r->req.cmd.buf[1] & 0x1) { |
| goto invalid_field; |
| } |
| |
| if (len < 8) { |
| goto invalid_param_len; |
| } |
| if (len < lduw_be_p(&p[0]) + 2) { |
| goto invalid_param_len; |
| } |
| if (len < lduw_be_p(&p[2]) + 8) { |
| goto invalid_param_len; |
| } |
| if (lduw_be_p(&p[2]) & 15) { |
| goto invalid_param_len; |
| } |
| |
| if (!blk_is_writable(s->qdev.conf.blk)) { |
| block_acct_invalid(blk_get_stats(s->qdev.conf.blk), BLOCK_ACCT_UNMAP); |
| scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); |
| return; |
| } |
| |
| data = g_new0(UnmapCBData, 1); |
| data->r = r; |
| data->inbuf = &p[8]; |
| data->count = lduw_be_p(&p[2]) >> 4; |
| |
| /* The matching unref is in scsi_unmap_complete, before data is freed. */ |
| scsi_req_ref(&r->req); |
| scsi_unmap_complete_noio(data, 0); |
| return; |
| |
| invalid_param_len: |
| block_acct_invalid(blk_get_stats(s->qdev.conf.blk), BLOCK_ACCT_UNMAP); |
| scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN)); |
| return; |
| |
| invalid_field: |
| block_acct_invalid(blk_get_stats(s->qdev.conf.blk), BLOCK_ACCT_UNMAP); |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| } |
| |
| typedef struct WriteSameCBData { |
| SCSIDiskReq *r; |
| int64_t sector; |
| int nb_sectors; |
| QEMUIOVector qiov; |
| struct iovec iov; |
| } WriteSameCBData; |
| |
| static void scsi_write_same_complete(void *opaque, int ret) |
| { |
| WriteSameCBData *data = opaque; |
| SCSIDiskReq *r = data->r; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| |
| assert(r->req.aiocb != NULL); |
| r->req.aiocb = NULL; |
| aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk)); |
| if (scsi_disk_req_check_error(r, ret, true)) { |
| goto done; |
| } |
| |
| block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); |
| |
| data->nb_sectors -= data->iov.iov_len / BDRV_SECTOR_SIZE; |
| data->sector += data->iov.iov_len / BDRV_SECTOR_SIZE; |
| data->iov.iov_len = MIN(data->nb_sectors * BDRV_SECTOR_SIZE, |
| data->iov.iov_len); |
| if (data->iov.iov_len) { |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, |
| data->iov.iov_len, BLOCK_ACCT_WRITE); |
| /* Reinitialize qiov, to handle unaligned WRITE SAME request |
| * where final qiov may need smaller size */ |
| qemu_iovec_init_external(&data->qiov, &data->iov, 1); |
| r->req.aiocb = blk_aio_pwritev(s->qdev.conf.blk, |
| data->sector << BDRV_SECTOR_BITS, |
| &data->qiov, 0, |
| scsi_write_same_complete, data); |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| return; |
| } |
| |
| scsi_req_complete(&r->req, GOOD); |
| |
| done: |
| scsi_req_unref(&r->req); |
| qemu_vfree(data->iov.iov_base); |
| g_free(data); |
| aio_context_release(blk_get_aio_context(s->qdev.conf.blk)); |
| } |
| |
| static void scsi_disk_emulate_write_same(SCSIDiskReq *r, uint8_t *inbuf) |
| { |
| SCSIRequest *req = &r->req; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| uint32_t nb_sectors = scsi_data_cdb_xfer(r->req.cmd.buf); |
| WriteSameCBData *data; |
| uint8_t *buf; |
| int i; |
| |
| /* Fail if PBDATA=1 or LBDATA=1 or ANCHOR=1. */ |
| if (nb_sectors == 0 || (req->cmd.buf[1] & 0x16)) { |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| return; |
| } |
| |
| if (!blk_is_writable(s->qdev.conf.blk)) { |
| scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); |
| return; |
| } |
| if (!check_lba_range(s, r->req.cmd.lba, nb_sectors)) { |
| scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); |
| return; |
| } |
| |
| if ((req->cmd.buf[1] & 0x1) || buffer_is_zero(inbuf, s->qdev.blocksize)) { |
| int flags = (req->cmd.buf[1] & 0x8) ? BDRV_REQ_MAY_UNMAP : 0; |
| |
| /* The request is used as the AIO opaque value, so add a ref. */ |
| scsi_req_ref(&r->req); |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, |
| nb_sectors * s->qdev.blocksize, |
| BLOCK_ACCT_WRITE); |
| r->req.aiocb = blk_aio_pwrite_zeroes(s->qdev.conf.blk, |
| r->req.cmd.lba * s->qdev.blocksize, |
| nb_sectors * s->qdev.blocksize, |
| flags, scsi_aio_complete, r); |
| return; |
| } |
| |
| data = g_new0(WriteSameCBData, 1); |
| data->r = r; |
| data->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| data->nb_sectors = nb_sectors * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| data->iov.iov_len = MIN(data->nb_sectors * BDRV_SECTOR_SIZE, |
| SCSI_WRITE_SAME_MAX); |
| data->iov.iov_base = buf = blk_blockalign(s->qdev.conf.blk, |
| data->iov.iov_len); |
| qemu_iovec_init_external(&data->qiov, &data->iov, 1); |
| |
| for (i = 0; i < data->iov.iov_len; i += s->qdev.blocksize) { |
| memcpy(&buf[i], inbuf, s->qdev.blocksize); |
| } |
| |
| scsi_req_ref(&r->req); |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, |
| data->iov.iov_len, BLOCK_ACCT_WRITE); |
| r->req.aiocb = blk_aio_pwritev(s->qdev.conf.blk, |
| data->sector << BDRV_SECTOR_BITS, |
| &data->qiov, 0, |
| scsi_write_same_complete, data); |
| } |
| |
| static void scsi_disk_emulate_write_data(SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| |
| if (r->iov.iov_len) { |
| int buflen = r->iov.iov_len; |
| trace_scsi_disk_emulate_write_data(buflen); |
| r->iov.iov_len = 0; |
| scsi_req_data(&r->req, buflen); |
| return; |
| } |
| |
| switch (req->cmd.buf[0]) { |
| case MODE_SELECT: |
| case MODE_SELECT_10: |
| /* This also clears the sense buffer for REQUEST SENSE. */ |
| scsi_disk_emulate_mode_select(r, r->iov.iov_base); |
| break; |
| |
| case UNMAP: |
| scsi_disk_emulate_unmap(r, r->iov.iov_base); |
| break; |
| |
| case VERIFY_10: |
| case VERIFY_12: |
| case VERIFY_16: |
| if (r->req.status == -1) { |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| } |
| break; |
| |
| case WRITE_SAME_10: |
| case WRITE_SAME_16: |
| scsi_disk_emulate_write_same(r, r->iov.iov_base); |
| break; |
| |
| default: |
| abort(); |
| } |
| } |
| |
| static int32_t scsi_disk_emulate_command(SCSIRequest *req, uint8_t *buf) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| uint64_t nb_sectors; |
| uint8_t *outbuf; |
| int buflen; |
| |
| switch (req->cmd.buf[0]) { |
| case INQUIRY: |
| case MODE_SENSE: |
| case MODE_SENSE_10: |
| case RESERVE: |
| case RESERVE_10: |
| case RELEASE: |
| case RELEASE_10: |
| case START_STOP: |
| case ALLOW_MEDIUM_REMOVAL: |
| case GET_CONFIGURATION: |
| case GET_EVENT_STATUS_NOTIFICATION: |
| case MECHANISM_STATUS: |
| case REQUEST_SENSE: |
| break; |
| |
| default: |
| if (!blk_is_available(s->qdev.conf.blk)) { |
| scsi_check_condition(r, SENSE_CODE(NO_MEDIUM)); |
| return 0; |
| } |
| break; |
| } |
| |
| /* |
| * FIXME: we shouldn't return anything bigger than 4k, but the code |
| * requires the buffer to be as big as req->cmd.xfer in several |
| * places. So, do not allow CDBs with a very large ALLOCATION |
| * LENGTH. The real fix would be to modify scsi_read_data and |
| * dma_buf_read, so that they return data beyond the buflen |
| * as all zeros. |
| */ |
| if (req->cmd.xfer > 65536) { |
| goto illegal_request; |
| } |
| r->buflen = MAX(4096, req->cmd.xfer); |
| |
| if (!r->iov.iov_base) { |
| r->iov.iov_base = blk_blockalign(s->qdev.conf.blk, r->buflen); |
| } |
| |
| outbuf = r->iov.iov_base; |
| memset(outbuf, 0, r->buflen); |
| switch (req->cmd.buf[0]) { |
| case TEST_UNIT_READY: |
| assert(blk_is_available(s->qdev.conf.blk)); |
| break; |
| case INQUIRY: |
| buflen = scsi_disk_emulate_inquiry(req, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case MODE_SENSE: |
| case MODE_SENSE_10: |
| buflen = scsi_disk_emulate_mode_sense(r, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case READ_TOC: |
| buflen = scsi_disk_emulate_read_toc(req, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case RESERVE: |
| if (req->cmd.buf[1] & 1) { |
| goto illegal_request; |
| } |
| break; |
| case RESERVE_10: |
| if (req->cmd.buf[1] & 3) { |
| goto illegal_request; |
| } |
| break; |
| case RELEASE: |
| if (req->cmd.buf[1] & 1) { |
| goto illegal_request; |
| } |
| break; |
| case RELEASE_10: |
| if (req->cmd.buf[1] & 3) { |
| goto illegal_request; |
| } |
| break; |
| case START_STOP: |
| if (scsi_disk_emulate_start_stop(r) < 0) { |
| return 0; |
| } |
| break; |
| case ALLOW_MEDIUM_REMOVAL: |
| s->tray_locked = req->cmd.buf[4] & 1; |
| blk_lock_medium(s->qdev.conf.blk, req->cmd.buf[4] & 1); |
| break; |
| case READ_CAPACITY_10: |
| /* The normal LEN field for this command is zero. */ |
| memset(outbuf, 0, 8); |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| if (!nb_sectors) { |
| scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY)); |
| return 0; |
| } |
| if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) { |
| goto illegal_request; |
| } |
| nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; |
| /* Returned value is the address of the last sector. */ |
| nb_sectors--; |
| /* Remember the new size for read/write sanity checking. */ |
| s->qdev.max_lba = nb_sectors; |
| /* Clip to 2TB, instead of returning capacity modulo 2TB. */ |
| if (nb_sectors > UINT32_MAX) { |
| nb_sectors = UINT32_MAX; |
| } |
| outbuf[0] = (nb_sectors >> 24) & 0xff; |
| outbuf[1] = (nb_sectors >> 16) & 0xff; |
| outbuf[2] = (nb_sectors >> 8) & 0xff; |
| outbuf[3] = nb_sectors & 0xff; |
| outbuf[4] = 0; |
| outbuf[5] = 0; |
| outbuf[6] = s->qdev.blocksize >> 8; |
| outbuf[7] = 0; |
| break; |
| case REQUEST_SENSE: |
| /* Just return "NO SENSE". */ |
| buflen = scsi_convert_sense(NULL, 0, outbuf, r->buflen, |
| (req->cmd.buf[1] & 1) == 0); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case MECHANISM_STATUS: |
| buflen = scsi_emulate_mechanism_status(s, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case GET_CONFIGURATION: |
| buflen = scsi_get_configuration(s, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case GET_EVENT_STATUS_NOTIFICATION: |
| buflen = scsi_get_event_status_notification(s, r, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case READ_DISC_INFORMATION: |
| buflen = scsi_read_disc_information(s, r, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case READ_DVD_STRUCTURE: |
| buflen = scsi_read_dvd_structure(s, r, outbuf); |
| if (buflen < 0) { |
| goto illegal_request; |
| } |
| break; |
| case SERVICE_ACTION_IN_16: |
| /* Service Action In subcommands. */ |
| if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) { |
| trace_scsi_disk_emulate_command_SAI_16(); |
| memset(outbuf, 0, req->cmd.xfer); |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| if (!nb_sectors) { |
| scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY)); |
| return 0; |
| } |
| if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) { |
| goto illegal_request; |
| } |
| nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; |
| /* Returned value is the address of the last sector. */ |
| nb_sectors--; |
| /* Remember the new size for read/write sanity checking. */ |
| s->qdev.max_lba = nb_sectors; |
| outbuf[0] = (nb_sectors >> 56) & 0xff; |
| outbuf[1] = (nb_sectors >> 48) & 0xff; |
| outbuf[2] = (nb_sectors >> 40) & 0xff; |
| outbuf[3] = (nb_sectors >> 32) & 0xff; |
| outbuf[4] = (nb_sectors >> 24) & 0xff; |
| outbuf[5] = (nb_sectors >> 16) & 0xff; |
| outbuf[6] = (nb_sectors >> 8) & 0xff; |
| outbuf[7] = nb_sectors & 0xff; |
| outbuf[8] = 0; |
| outbuf[9] = 0; |
| outbuf[10] = s->qdev.blocksize >> 8; |
| outbuf[11] = 0; |
| outbuf[12] = 0; |
| outbuf[13] = get_physical_block_exp(&s->qdev.conf); |
| |
| /* set TPE bit if the format supports discard */ |
| if (s->qdev.conf.discard_granularity) { |
| outbuf[14] = 0x80; |
| } |
| |
| /* Protection, exponent and lowest lba field left blank. */ |
| break; |
| } |
| trace_scsi_disk_emulate_command_SAI_unsupported(); |
| goto illegal_request; |
| case SYNCHRONIZE_CACHE: |
| /* The request is used as the AIO opaque value, so add a ref. */ |
| scsi_req_ref(&r->req); |
| block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, |
| BLOCK_ACCT_FLUSH); |
| r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r); |
| return 0; |
| case SEEK_10: |
| trace_scsi_disk_emulate_command_SEEK_10(r->req.cmd.lba); |
| if (r->req.cmd.lba > s->qdev.max_lba) { |
| goto illegal_lba; |
| } |
| break; |
| case MODE_SELECT: |
| trace_scsi_disk_emulate_command_MODE_SELECT(r->req.cmd.xfer); |
| break; |
| case MODE_SELECT_10: |
| trace_scsi_disk_emulate_command_MODE_SELECT_10(r->req.cmd.xfer); |
| break; |
| case UNMAP: |
| trace_scsi_disk_emulate_command_UNMAP(r->req.cmd.xfer); |
| break; |
| case VERIFY_10: |
| case VERIFY_12: |
| case VERIFY_16: |
| trace_scsi_disk_emulate_command_VERIFY((req->cmd.buf[1] >> 1) & 3); |
| if (req->cmd.buf[1] & 6) { |
| goto illegal_request; |
| } |
| break; |
| case WRITE_SAME_10: |
| case WRITE_SAME_16: |
| trace_scsi_disk_emulate_command_WRITE_SAME( |
| req->cmd.buf[0] == WRITE_SAME_10 ? 10 : 16, r->req.cmd.xfer); |
| break; |
| default: |
| trace_scsi_disk_emulate_command_UNKNOWN(buf[0], |
| scsi_command_name(buf[0])); |
| scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE)); |
| return 0; |
| } |
| assert(!r->req.aiocb); |
| r->iov.iov_len = MIN(r->buflen, req->cmd.xfer); |
| if (r->iov.iov_len == 0) { |
| scsi_req_complete(&r->req, GOOD); |
| } |
| if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { |
| assert(r->iov.iov_len == req->cmd.xfer); |
| return -r->iov.iov_len; |
| } else { |
| return r->iov.iov_len; |
| } |
| |
| illegal_request: |
| if (r->req.status == -1) { |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| } |
| return 0; |
| |
| illegal_lba: |
| scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); |
| return 0; |
| } |
| |
| /* Execute a scsi command. Returns the length of the data expected by the |
| command. This will be Positive for data transfers from the device |
| (eg. disk reads), negative for transfers to the device (eg. disk writes), |
| and zero if the command does not transfer any data. */ |
| |
| static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); |
| uint32_t len; |
| uint8_t command; |
| |
| command = buf[0]; |
| |
| if (!blk_is_available(s->qdev.conf.blk)) { |
| scsi_check_condition(r, SENSE_CODE(NO_MEDIUM)); |
| return 0; |
| } |
| |
| len = scsi_data_cdb_xfer(r->req.cmd.buf); |
| switch (command) { |
| case READ_6: |
| case READ_10: |
| case READ_12: |
| case READ_16: |
| trace_scsi_disk_dma_command_READ(r->req.cmd.lba, len); |
| /* Protection information is not supported. For SCSI versions 2 and |
| * older (as determined by snooping the guest's INQUIRY commands), |
| * there is no RD/WR/VRPROTECT, so skip this check in these versions. |
| */ |
| if (s->qdev.scsi_version > 2 && (r->req.cmd.buf[1] & 0xe0)) { |
| goto illegal_request; |
| } |
| if (!check_lba_range(s, r->req.cmd.lba, len)) { |
| goto illegal_lba; |
| } |
| r->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| r->sector_count = len * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| break; |
| case WRITE_6: |
| case WRITE_10: |
| case WRITE_12: |
| case WRITE_16: |
| case WRITE_VERIFY_10: |
| case WRITE_VERIFY_12: |
| case WRITE_VERIFY_16: |
| if (!blk_is_writable(s->qdev.conf.blk)) { |
| scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); |
| return 0; |
| } |
| trace_scsi_disk_dma_command_WRITE( |
| (command & 0xe) == 0xe ? "And Verify " : "", |
| r->req.cmd.lba, len); |
| /* fall through */ |
| case VERIFY_10: |
| case VERIFY_12: |
| case VERIFY_16: |
| /* We get here only for BYTCHK == 0x01 and only for scsi-block. |
| * As far as DMA is concerned, we can treat it the same as a write; |
| * scsi_block_do_sgio will send VERIFY commands. |
| */ |
| if (s->qdev.scsi_version > 2 && (r->req.cmd.buf[1] & 0xe0)) { |
| goto illegal_request; |
| } |
| if (!check_lba_range(s, r->req.cmd.lba, len)) { |
| goto illegal_lba; |
| } |
| r->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| r->sector_count = len * (s->qdev.blocksize / BDRV_SECTOR_SIZE); |
| break; |
| default: |
| abort(); |
| illegal_request: |
| scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); |
| return 0; |
| illegal_lba: |
| scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); |
| return 0; |
| } |
| r->need_fua_emulation = sdc->need_fua_emulation(&r->req.cmd); |
| if (r->sector_count == 0) { |
| scsi_req_complete(&r->req, GOOD); |
| } |
| assert(r->iov.iov_len == 0); |
| if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { |
| return -r->sector_count * BDRV_SECTOR_SIZE; |
| } else { |
| return r->sector_count * BDRV_SECTOR_SIZE; |
| } |
| } |
| |
| static void scsi_disk_reset(DeviceState *dev) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev); |
| uint64_t nb_sectors; |
| |
| scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET)); |
| |
| blk_get_geometry(s->qdev.conf.blk, &nb_sectors); |
| nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; |
| if (nb_sectors) { |
| nb_sectors--; |
| } |
| s->qdev.max_lba = nb_sectors; |
| /* reset tray statuses */ |
| s->tray_locked = 0; |
| s->tray_open = 0; |
| |
| s->qdev.scsi_version = s->qdev.default_scsi_version; |
| } |
| |
| static void scsi_disk_resize_cb(void *opaque) |
| { |
| SCSIDiskState *s = opaque; |
| |
| /* SPC lists this sense code as available only for |
| * direct-access devices. |
| */ |
| if (s->qdev.type == TYPE_DISK) { |
| scsi_device_report_change(&s->qdev, SENSE_CODE(CAPACITY_CHANGED)); |
| } |
| } |
| |
| static void scsi_cd_change_media_cb(void *opaque, bool load, Error **errp) |
| { |
| SCSIDiskState *s = opaque; |
| |
| /* |
| * When a CD gets changed, we have to report an ejected state and |
| * then a loaded state to guests so that they detect tray |
| * open/close and media change events. Guests that do not use |
| * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close |
| * states rely on this behavior. |
| * |
| * media_changed governs the state machine used for unit attention |
| * report. media_event is used by GET EVENT STATUS NOTIFICATION. |
| */ |
| s->media_changed = load; |
| s->tray_open = !load; |
| scsi_device_set_ua(&s->qdev, SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM)); |
| s->media_event = true; |
| s->eject_request = false; |
| } |
| |
| static void scsi_cd_eject_request_cb(void *opaque, bool force) |
| { |
| SCSIDiskState *s = opaque; |
| |
| s->eject_request = true; |
| if (force) { |
| s->tray_locked = false; |
| } |
| } |
| |
| static bool scsi_cd_is_tray_open(void *opaque) |
| { |
| return ((SCSIDiskState *)opaque)->tray_open; |
| } |
| |
| static bool scsi_cd_is_medium_locked(void *opaque) |
| { |
| return ((SCSIDiskState *)opaque)->tray_locked; |
| } |
| |
| static const BlockDevOps scsi_disk_removable_block_ops = { |
| .change_media_cb = scsi_cd_change_media_cb, |
| .eject_request_cb = scsi_cd_eject_request_cb, |
| .is_tray_open = scsi_cd_is_tray_open, |
| .is_medium_locked = scsi_cd_is_medium_locked, |
| |
| .resize_cb = scsi_disk_resize_cb, |
| }; |
| |
| static const BlockDevOps scsi_disk_block_ops = { |
| .resize_cb = scsi_disk_resize_cb, |
| }; |
| |
| static void scsi_disk_unit_attention_reported(SCSIDevice *dev) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); |
| if (s->media_changed) { |
| s->media_changed = false; |
| scsi_device_set_ua(&s->qdev, SENSE_CODE(MEDIUM_CHANGED)); |
| } |
| } |
| |
| static void scsi_realize(SCSIDevice *dev, Error **errp) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); |
| bool read_only; |
| |
| if (!s->qdev.conf.blk) { |
| error_setg(errp, "drive property not set"); |
| return; |
| } |
| |
| if (!(s->features & (1 << SCSI_DISK_F_REMOVABLE)) && |
| !blk_is_inserted(s->qdev.conf.blk)) { |
| error_setg(errp, "Device needs media, but drive is empty"); |
| return; |
| } |
| |
| if (!blkconf_blocksizes(&s->qdev.conf, errp)) { |
| return; |
| } |
| |
| if (blk_get_aio_context(s->qdev.conf.blk) != qemu_get_aio_context() && |
| !s->qdev.hba_supports_iothread) |
| { |
| error_setg(errp, "HBA does not support iothreads"); |
| return; |
| } |
| |
| if (dev->type == TYPE_DISK) { |
| if (!blkconf_geometry(&dev->conf, NULL, 65535, 255, 255, errp)) { |
| return; |
| } |
| } |
| |
| read_only = !blk_supports_write_perm(s->qdev.conf.blk); |
| if (dev->type == TYPE_ROM) { |
| read_only = true; |
| } |
| |
| if (!blkconf_apply_backend_options(&dev->conf, read_only, |
| dev->type == TYPE_DISK, errp)) { |
| return; |
| } |
| |
| if (s->qdev.conf.discard_granularity == -1) { |
| s->qdev.conf.discard_granularity = |
| MAX(s->qdev.conf.logical_block_size, DEFAULT_DISCARD_GRANULARITY); |
| } |
| |
| if (!s->version) { |
| s->version = g_strdup(qemu_hw_version()); |
| } |
| if (!s->vendor) { |
| s->vendor = g_strdup("QEMU"); |
| } |
| if (!s->device_id) { |
| if (s->serial) { |
| s->device_id = g_strdup_printf("%.20s", s->serial); |
| } else { |
| const char *str = blk_name(s->qdev.conf.blk); |
| if (str && *str) { |
| s->device_id = g_strdup(str); |
| } |
| } |
| } |
| |
| if (blk_is_sg(s->qdev.conf.blk)) { |
| error_setg(errp, "unwanted /dev/sg*"); |
| return; |
| } |
| |
| if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && |
| !(s->features & (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS))) { |
| blk_set_dev_ops(s->qdev.conf.blk, &scsi_disk_removable_block_ops, s); |
| } else { |
| blk_set_dev_ops(s->qdev.conf.blk, &scsi_disk_block_ops, s); |
| } |
| blk_set_guest_block_size(s->qdev.conf.blk, s->qdev.blocksize); |
| |
| blk_iostatus_enable(s->qdev.conf.blk); |
| |
| add_boot_device_lchs(&dev->qdev, NULL, |
| dev->conf.lcyls, |
| dev->conf.lheads, |
| dev->conf.lsecs); |
| } |
| |
| static void scsi_unrealize(SCSIDevice *dev) |
| { |
| del_boot_device_lchs(&dev->qdev, NULL); |
| } |
| |
| static void scsi_hd_realize(SCSIDevice *dev, Error **errp) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); |
| AioContext *ctx = NULL; |
| /* can happen for devices without drive. The error message for missing |
| * backend will be issued in scsi_realize |
| */ |
| if (s->qdev.conf.blk) { |
| ctx = blk_get_aio_context(s->qdev.conf.blk); |
| aio_context_acquire(ctx); |
| if (!blkconf_blocksizes(&s->qdev.conf, errp)) { |
| goto out; |
| } |
| } |
| s->qdev.blocksize = s->qdev.conf.logical_block_size; |
| s->qdev.type = TYPE_DISK; |
| if (!s->product) { |
| s->product = g_strdup("QEMU HARDDISK"); |
| } |
| scsi_realize(&s->qdev, errp); |
| out: |
| if (ctx) { |
| aio_context_release(ctx); |
| } |
| } |
| |
| static void scsi_cd_realize(SCSIDevice *dev, Error **errp) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); |
| AioContext *ctx; |
| int ret; |
| |
| if (!dev->conf.blk) { |
| /* Anonymous BlockBackend for an empty drive. As we put it into |
| * dev->conf, qdev takes care of detaching on unplug. */ |
| dev->conf.blk = blk_new(qemu_get_aio_context(), 0, BLK_PERM_ALL); |
| ret = blk_attach_dev(dev->conf.blk, &dev->qdev); |
| assert(ret == 0); |
| } |
| |
| ctx = blk_get_aio_context(dev->conf.blk); |
| aio_context_acquire(ctx); |
| s->qdev.blocksize = 2048; |
| s->qdev.type = TYPE_ROM; |
| s->features |= 1 << SCSI_DISK_F_REMOVABLE; |
| if (!s->product) { |
| s->product = g_strdup("QEMU CD-ROM"); |
| } |
| scsi_realize(&s->qdev, errp); |
| aio_context_release(ctx); |
| } |
| |
| |
| static const SCSIReqOps scsi_disk_emulate_reqops = { |
| .size = sizeof(SCSIDiskReq), |
| .free_req = scsi_free_request, |
| .send_command = scsi_disk_emulate_command, |
| .read_data = scsi_disk_emulate_read_data, |
| .write_data = scsi_disk_emulate_write_data, |
| .get_buf = scsi_get_buf, |
| }; |
| |
| static const SCSIReqOps scsi_disk_dma_reqops = { |
| .size = sizeof(SCSIDiskReq), |
| .free_req = scsi_free_request, |
| .send_command = scsi_disk_dma_command, |
| .read_data = scsi_read_data, |
| .write_data = scsi_write_data, |
| .get_buf = scsi_get_buf, |
| .load_request = scsi_disk_load_request, |
| .save_request = scsi_disk_save_request, |
| }; |
| |
| static const SCSIReqOps *const scsi_disk_reqops_dispatch[256] = { |
| [TEST_UNIT_READY] = &scsi_disk_emulate_reqops, |
| [INQUIRY] = &scsi_disk_emulate_reqops, |
| [MODE_SENSE] = &scsi_disk_emulate_reqops, |
| [MODE_SENSE_10] = &scsi_disk_emulate_reqops, |
| [START_STOP] = &scsi_disk_emulate_reqops, |
| [ALLOW_MEDIUM_REMOVAL] = &scsi_disk_emulate_reqops, |
| [READ_CAPACITY_10] = &scsi_disk_emulate_reqops, |
| [READ_TOC] = &scsi_disk_emulate_reqops, |
| [READ_DVD_STRUCTURE] = &scsi_disk_emulate_reqops, |
| [READ_DISC_INFORMATION] = &scsi_disk_emulate_reqops, |
| [GET_CONFIGURATION] = &scsi_disk_emulate_reqops, |
| [GET_EVENT_STATUS_NOTIFICATION] = &scsi_disk_emulate_reqops, |
| [MECHANISM_STATUS] = &scsi_disk_emulate_reqops, |
| [SERVICE_ACTION_IN_16] = &scsi_disk_emulate_reqops, |
| [REQUEST_SENSE] = &scsi_disk_emulate_reqops, |
| [SYNCHRONIZE_CACHE] = &scsi_disk_emulate_reqops, |
| [SEEK_10] = &scsi_disk_emulate_reqops, |
| [MODE_SELECT] = &scsi_disk_emulate_reqops, |
| [MODE_SELECT_10] = &scsi_disk_emulate_reqops, |
| [UNMAP] = &scsi_disk_emulate_reqops, |
| [WRITE_SAME_10] = &scsi_disk_emulate_reqops, |
| [WRITE_SAME_16] = &scsi_disk_emulate_reqops, |
| [VERIFY_10] = &scsi_disk_emulate_reqops, |
| [VERIFY_12] = &scsi_disk_emulate_reqops, |
| [VERIFY_16] = &scsi_disk_emulate_reqops, |
| |
| [READ_6] = &scsi_disk_dma_reqops, |
| [READ_10] = &scsi_disk_dma_reqops, |
| [READ_12] = &scsi_disk_dma_reqops, |
| [READ_16] = &scsi_disk_dma_reqops, |
| [WRITE_6] = &scsi_disk_dma_reqops, |
| [WRITE_10] = &scsi_disk_dma_reqops, |
| [WRITE_12] = &scsi_disk_dma_reqops, |
| [WRITE_16] = &scsi_disk_dma_reqops, |
| [WRITE_VERIFY_10] = &scsi_disk_dma_reqops, |
| [WRITE_VERIFY_12] = &scsi_disk_dma_reqops, |
| [WRITE_VERIFY_16] = &scsi_disk_dma_reqops, |
| }; |
| |
| static void scsi_disk_new_request_dump(uint32_t lun, uint32_t tag, uint8_t *buf) |
| { |
| int i; |
| int len = scsi_cdb_length(buf); |
| char *line_buffer, *p; |
| |
| assert(len > 0 && len <= 16); |
| line_buffer = g_malloc(len * 5 + 1); |
| |
| for (i = 0, p = line_buffer; i < len; i++) { |
| p += sprintf(p, " 0x%02x", buf[i]); |
| } |
| trace_scsi_disk_new_request(lun, tag, line_buffer); |
| |
| g_free(line_buffer); |
| } |
| |
| static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun, |
| uint8_t *buf, void *hba_private) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
| SCSIRequest *req; |
| const SCSIReqOps *ops; |
| uint8_t command; |
| |
| command = buf[0]; |
| ops = scsi_disk_reqops_dispatch[command]; |
| if (!ops) { |
| ops = &scsi_disk_emulate_reqops; |
| } |
| req = scsi_req_alloc(ops, &s->qdev, tag, lun, hba_private); |
| |
| if (trace_event_get_state_backends(TRACE_SCSI_DISK_NEW_REQUEST)) { |
| scsi_disk_new_request_dump(lun, tag, buf); |
| } |
| |
| return req; |
| } |
| |
| #ifdef __linux__ |
| static int get_device_type(SCSIDiskState *s) |
| { |
| uint8_t cmd[16]; |
| uint8_t buf[36]; |
| int ret; |
| |
| memset(cmd, 0, sizeof(cmd)); |
| memset(buf, 0, sizeof(buf)); |
| cmd[0] = INQUIRY; |
| cmd[4] = sizeof(buf); |
| |
| ret = scsi_SG_IO_FROM_DEV(s->qdev.conf.blk, cmd, sizeof(cmd), |
| buf, sizeof(buf), s->qdev.io_timeout); |
| if (ret < 0) { |
| return -1; |
| } |
| s->qdev.type = buf[0]; |
| if (buf[1] & 0x80) { |
| s->features |= 1 << SCSI_DISK_F_REMOVABLE; |
| } |
| return 0; |
| } |
| |
| static void scsi_block_realize(SCSIDevice *dev, Error **errp) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); |
| AioContext *ctx; |
| int sg_version; |
| int rc; |
| |
| if (!s->qdev.conf.blk) { |
| error_setg(errp, "drive property not set"); |
| return; |
| } |
| |
| if (s->rotation_rate) { |
| error_report_once("rotation_rate is specified for scsi-block but is " |
| "not implemented. This option is deprecated and will " |
| "be removed in a future version"); |
| } |
| |
| ctx = blk_get_aio_context(s->qdev.conf.blk); |
| aio_context_acquire(ctx); |
| |
| /* check we are using a driver managing SG_IO (version 3 and after) */ |
| rc = blk_ioctl(s->qdev.conf.blk, SG_GET_VERSION_NUM, &sg_version); |
| if (rc < 0) { |
| error_setg_errno(errp, -rc, "cannot get SG_IO version number"); |
| if (rc != -EPERM) { |
| error_append_hint(errp, "Is this a SCSI device?\n"); |
| } |
| goto out; |
| } |
| if (sg_version < 30000) { |
| error_setg(errp, "scsi generic interface too old"); |
| goto out; |
| } |
| |
| /* get device type from INQUIRY data */ |
| rc = get_device_type(s); |
| if (rc < 0) { |
| error_setg(errp, "INQUIRY failed"); |
| goto out; |
| } |
| |
| /* Make a guess for the block size, we'll fix it when the guest sends. |
| * READ CAPACITY. If they don't, they likely would assume these sizes |
| * anyway. (TODO: check in /sys). |
| */ |
| if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) { |
| s->qdev.blocksize = 2048; |
| } else { |
| s->qdev.blocksize = 512; |
| } |
| |
| /* Makes the scsi-block device not removable by using HMP and QMP eject |
| * command. |
| */ |
| s->features |= (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS); |
| |
| scsi_realize(&s->qdev, errp); |
| scsi_generic_read_device_inquiry(&s->qdev); |
| |
| out: |
| aio_context_release(ctx); |
| } |
| |
| typedef struct SCSIBlockReq { |
| SCSIDiskReq req; |
| sg_io_hdr_t io_header; |
| |
| /* Selected bytes of the original CDB, copied into our own CDB. */ |
| uint8_t cmd, cdb1, group_number; |
| |
| /* CDB passed to SG_IO. */ |
| uint8_t cdb[16]; |
| BlockCompletionFunc *cb; |
| void *cb_opaque; |
| } SCSIBlockReq; |
| |
| static void scsi_block_sgio_complete(void *opaque, int ret) |
| { |
| SCSIBlockReq *req = (SCSIBlockReq *)opaque; |
| SCSIDiskReq *r = &req->req; |
| SCSIDevice *s = r->req.dev; |
| sg_io_hdr_t *io_hdr = &req->io_header; |
| |
| if (ret == 0) { |
| if (io_hdr->host_status != SCSI_HOST_OK) { |
| scsi_req_complete_failed(&r->req, io_hdr->host_status); |
| scsi_req_unref(&r->req); |
| return; |
| } |
| |
| if (io_hdr->driver_status & SG_ERR_DRIVER_TIMEOUT) { |
| ret = BUSY; |
| } else { |
| ret = io_hdr->status; |
| } |
| |
| if (ret > 0) { |
| aio_context_acquire(blk_get_aio_context(s->conf.blk)); |
| if (scsi_handle_rw_error(r, ret, true)) { |
| aio_context_release(blk_get_aio_context(s->conf.blk)); |
| scsi_req_unref(&r->req); |
| return; |
| } |
| aio_context_release(blk_get_aio_context(s->conf.blk)); |
| |
| /* Ignore error. */ |
| ret = 0; |
| } |
| } |
| |
| req->cb(req->cb_opaque, ret); |
| } |
| |
| static BlockAIOCB *scsi_block_do_sgio(SCSIBlockReq *req, |
| int64_t offset, QEMUIOVector *iov, |
| int direction, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| sg_io_hdr_t *io_header = &req->io_header; |
| SCSIDiskReq *r = &req->req; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| int nb_logical_blocks; |
| uint64_t lba; |
| BlockAIOCB *aiocb; |
| |
| /* This is not supported yet. It can only happen if the guest does |
| * reads and writes that are not aligned to one logical sectors |
| * _and_ cover multiple MemoryRegions. |
| */ |
| assert(offset % s->qdev.blocksize == 0); |
| assert(iov->size % s->qdev.blocksize == 0); |
| |
| io_header->interface_id = 'S'; |
| |
| /* The data transfer comes from the QEMUIOVector. */ |
| io_header->dxfer_direction = direction; |
| io_header->dxfer_len = iov->size; |
| io_header->dxferp = (void *)iov->iov; |
| io_header->iovec_count = iov->niov; |
| assert(io_header->iovec_count == iov->niov); /* no overflow! */ |
| |
| /* Build a new CDB with the LBA and length patched in, in case |
| * DMA helpers split the transfer in multiple segments. Do not |
| * build a CDB smaller than what the guest wanted, and only build |
| * a larger one if strictly necessary. |
| */ |
| io_header->cmdp = req->cdb; |
| lba = offset / s->qdev.blocksize; |
| nb_logical_blocks = io_header->dxfer_len / s->qdev.blocksize; |
| |
| if ((req->cmd >> 5) == 0 && lba <= 0x1ffff) { |
| /* 6-byte CDB */ |
| stl_be_p(&req->cdb[0], lba | (req->cmd << 24)); |
| req->cdb[4] = nb_logical_blocks; |
| req->cdb[5] = 0; |
| io_header->cmd_len = 6; |
| } else if ((req->cmd >> 5) <= 1 && lba <= 0xffffffffULL) { |
| /* 10-byte CDB */ |
| req->cdb[0] = (req->cmd & 0x1f) | 0x20; |
| req->cdb[1] = req->cdb1; |
| stl_be_p(&req->cdb[2], lba); |
| req->cdb[6] = req->group_number; |
| stw_be_p(&req->cdb[7], nb_logical_blocks); |
| req->cdb[9] = 0; |
| io_header->cmd_len = 10; |
| } else if ((req->cmd >> 5) != 4 && lba <= 0xffffffffULL) { |
| /* 12-byte CDB */ |
| req->cdb[0] = (req->cmd & 0x1f) | 0xA0; |
| req->cdb[1] = req->cdb1; |
| stl_be_p(&req->cdb[2], lba); |
| stl_be_p(&req->cdb[6], nb_logical_blocks); |
| req->cdb[10] = req->group_number; |
| req->cdb[11] = 0; |
| io_header->cmd_len = 12; |
| } else { |
| /* 16-byte CDB */ |
| req->cdb[0] = (req->cmd & 0x1f) | 0x80; |
| req->cdb[1] = req->cdb1; |
| stq_be_p(&req->cdb[2], lba); |
| stl_be_p(&req->cdb[10], nb_logical_blocks); |
| req->cdb[14] = req->group_number; |
| req->cdb[15] = 0; |
| io_header->cmd_len = 16; |
| } |
| |
| /* The rest is as in scsi-generic.c. */ |
| io_header->mx_sb_len = sizeof(r->req.sense); |
| io_header->sbp = r->req.sense; |
| io_header->timeout = s->qdev.io_timeout * 1000; |
| io_header->usr_ptr = r; |
| io_header->flags |= SG_FLAG_DIRECT_IO; |
| req->cb = cb; |
| req->cb_opaque = opaque; |
| trace_scsi_disk_aio_sgio_command(r->req.tag, req->cdb[0], lba, |
| nb_logical_blocks, io_header->timeout); |
| aiocb = blk_aio_ioctl(s->qdev.conf.blk, SG_IO, io_header, scsi_block_sgio_complete, req); |
| assert(aiocb != NULL); |
| return aiocb; |
| } |
| |
| static bool scsi_block_no_fua(SCSICommand *cmd) |
| { |
| return false; |
| } |
| |
| static BlockAIOCB *scsi_block_dma_readv(int64_t offset, |
| QEMUIOVector *iov, |
| BlockCompletionFunc *cb, void *cb_opaque, |
| void *opaque) |
| { |
| SCSIBlockReq *r = opaque; |
| return scsi_block_do_sgio(r, offset, iov, |
| SG_DXFER_FROM_DEV, cb, cb_opaque); |
| } |
| |
| static BlockAIOCB *scsi_block_dma_writev(int64_t offset, |
| QEMUIOVector *iov, |
| BlockCompletionFunc *cb, void *cb_opaque, |
| void *opaque) |
| { |
| SCSIBlockReq *r = opaque; |
| return scsi_block_do_sgio(r, offset, iov, |
| SG_DXFER_TO_DEV, cb, cb_opaque); |
| } |
| |
| static bool scsi_block_is_passthrough(SCSIDiskState *s, uint8_t *buf) |
| { |
| switch (buf[0]) { |
| case VERIFY_10: |
| case VERIFY_12: |
| case VERIFY_16: |
| /* Check if BYTCHK == 0x01 (data-out buffer contains data |
| * for the number of logical blocks specified in the length |
| * field). For other modes, do not use scatter/gather operation. |
| */ |
| if ((buf[1] & 6) == 2) { |
| return false; |
| } |
| break; |
| |
| case READ_6: |
| case READ_10: |
| case READ_12: |
| case READ_16: |
| case WRITE_6: |
| case WRITE_10: |
| case WRITE_12: |
| case WRITE_16: |
| case WRITE_VERIFY_10: |
| case WRITE_VERIFY_12: |
| case WRITE_VERIFY_16: |
| /* MMC writing cannot be done via DMA helpers, because it sometimes |
| * involves writing beyond the maximum LBA or to negative LBA (lead-in). |
| * We might use scsi_block_dma_reqops as long as no writing commands are |
| * seen, but performance usually isn't paramount on optical media. So, |
| * just make scsi-block operate the same as scsi-generic for them. |
| */ |
| if (s->qdev.type != TYPE_ROM) { |
| return false; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| return true; |
| } |
| |
| |
| static int32_t scsi_block_dma_command(SCSIRequest *req, uint8_t *buf) |
| { |
| SCSIBlockReq *r = (SCSIBlockReq *)req; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
| |
| r->cmd = req->cmd.buf[0]; |
| switch (r->cmd >> 5) { |
| case 0: |
| /* 6-byte CDB. */ |
| r->cdb1 = r->group_number = 0; |
| break; |
| case 1: |
| /* 10-byte CDB. */ |
| r->cdb1 = req->cmd.buf[1]; |
| r->group_number = req->cmd.buf[6]; |
| break; |
| case 4: |
| /* 12-byte CDB. */ |
| r->cdb1 = req->cmd.buf[1]; |
| r->group_number = req->cmd.buf[10]; |
| break; |
| case 5: |
| /* 16-byte CDB. */ |
| r->cdb1 = req->cmd.buf[1]; |
| r->group_number = req->cmd.buf[14]; |
| break; |
| default: |
| abort(); |
| } |
| |
| /* Protection information is not supported. For SCSI versions 2 and |
| * older (as determined by snooping the guest's INQUIRY commands), |
| * there is no RD/WR/VRPROTECT, so skip this check in these versions. |
| */ |
| if (s->qdev.scsi_version > 2 && (req->cmd.buf[1] & 0xe0)) { |
| scsi_check_condition(&r->req, SENSE_CODE(INVALID_FIELD)); |
| return 0; |
| } |
| |
| return scsi_disk_dma_command(req, buf); |
| } |
| |
| static const SCSIReqOps scsi_block_dma_reqops = { |
| .size = sizeof(SCSIBlockReq), |
| .free_req = scsi_free_request, |
| .send_command = scsi_block_dma_command, |
| .read_data = scsi_read_data, |
| .write_data = scsi_write_data, |
| .get_buf = scsi_get_buf, |
| .load_request = scsi_disk_load_request, |
| .save_request = scsi_disk_save_request, |
| }; |
| |
| static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag, |
| uint32_t lun, uint8_t *buf, |
| void *hba_private) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
| |
| if (scsi_block_is_passthrough(s, buf)) { |
| return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun, |
| hba_private); |
| } else { |
| return scsi_req_alloc(&scsi_block_dma_reqops, &s->qdev, tag, lun, |
| hba_private); |
| } |
| } |
| |
| static int scsi_block_parse_cdb(SCSIDevice *d, SCSICommand *cmd, |
| uint8_t *buf, void *hba_private) |
| { |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
| |
| if (scsi_block_is_passthrough(s, buf)) { |
| return scsi_bus_parse_cdb(&s->qdev, cmd, buf, hba_private); |
| } else { |
| return scsi_req_parse_cdb(&s->qdev, cmd, buf); |
| } |
| } |
| |
| static void scsi_block_update_sense(SCSIRequest *req) |
| { |
| SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); |
| SCSIBlockReq *br = DO_UPCAST(SCSIBlockReq, req, r); |
| r->req.sense_len = MIN(br->io_header.sb_len_wr, sizeof(r->req.sense)); |
| } |
| #endif |
| |
| static |
| BlockAIOCB *scsi_dma_readv(int64_t offset, QEMUIOVector *iov, |
| BlockCompletionFunc *cb, void *cb_opaque, |
| void *opaque) |
| { |
| SCSIDiskReq *r = opaque; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| return blk_aio_preadv(s->qdev.conf.blk, offset, iov, 0, cb, cb_opaque); |
| } |
| |
| static |
| BlockAIOCB *scsi_dma_writev(int64_t offset, QEMUIOVector *iov, |
| BlockCompletionFunc *cb, void *cb_opaque, |
| void *opaque) |
| { |
| SCSIDiskReq *r = opaque; |
| SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
| return blk_aio_pwritev(s->qdev.conf.blk, offset, iov, 0, cb, cb_opaque); |
| } |
| |
| static void scsi_disk_base_class_initfn(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SCSIDiskClass *sdc = SCSI_DISK_BASE_CLASS(klass); |
| |
| dc->fw_name = "disk"; |
| dc->reset = scsi_disk_reset; |
| sdc->dma_readv = scsi_dma_readv; |
| sdc->dma_writev = scsi_dma_writev; |
| sdc->need_fua_emulation = scsi_is_cmd_fua; |
| } |
| |
| static const TypeInfo scsi_disk_base_info = { |
| .name = TYPE_SCSI_DISK_BASE, |
| .parent = TYPE_SCSI_DEVICE, |
| .class_init = scsi_disk_base_class_initfn, |
| .instance_size = sizeof(SCSIDiskState), |
| .class_size = sizeof(SCSIDiskClass), |
| .abstract = true, |
| }; |
| |
| #define DEFINE_SCSI_DISK_PROPERTIES() \ |
| DEFINE_PROP_DRIVE_IOTHREAD("drive", SCSIDiskState, qdev.conf.blk), \ |
| DEFINE_BLOCK_PROPERTIES_BASE(SCSIDiskState, qdev.conf), \ |
| DEFINE_BLOCK_ERROR_PROPERTIES(SCSIDiskState, qdev.conf), \ |
| DEFINE_PROP_STRING("ver", SCSIDiskState, version), \ |
| DEFINE_PROP_STRING("serial", SCSIDiskState, serial), \ |
| DEFINE_PROP_STRING("vendor", SCSIDiskState, vendor), \ |
| DEFINE_PROP_STRING("product", SCSIDiskState, product), \ |
| DEFINE_PROP_STRING("device_id", SCSIDiskState, device_id) |
| |
| |
| static Property scsi_hd_properties[] = { |
| DEFINE_SCSI_DISK_PROPERTIES(), |
| DEFINE_PROP_BIT("removable", SCSIDiskState, features, |
| SCSI_DISK_F_REMOVABLE, false), |
| DEFINE_PROP_BIT("dpofua", SCSIDiskState, features, |
| SCSI_DISK_F_DPOFUA, false), |
| DEFINE_PROP_UINT64("wwn", SCSIDiskState, qdev.wwn, 0), |
| DEFINE_PROP_UINT64("port_wwn", SCSIDiskState, qdev.port_wwn, 0), |
| DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0), |
| DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size, |
| DEFAULT_MAX_UNMAP_SIZE), |
| DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, |
| DEFAULT_MAX_IO_SIZE), |
| DEFINE_PROP_UINT16("rotation_rate", SCSIDiskState, rotation_rate, 0), |
| DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, |
| 5), |
| DEFINE_BLOCK_CHS_PROPERTIES(SCSIDiskState, qdev.conf), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static const VMStateDescription vmstate_scsi_disk_state = { |
| .name = "scsi-disk", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_SCSI_DEVICE(qdev, SCSIDiskState), |
| VMSTATE_BOOL(media_changed, SCSIDiskState), |
| VMSTATE_BOOL(media_event, SCSIDiskState), |
| VMSTATE_BOOL(eject_request, SCSIDiskState), |
| VMSTATE_BOOL(tray_open, SCSIDiskState), |
| VMSTATE_BOOL(tray_locked, SCSIDiskState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void scsi_hd_class_initfn(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); |
| |
| sc->realize = scsi_hd_realize; |
| sc->unrealize = scsi_unrealize; |
| sc->alloc_req = scsi_new_request; |
| sc->unit_attention_reported = scsi_disk_unit_attention_reported; |
| dc->desc = "virtual SCSI disk"; |
| device_class_set_props(dc, scsi_hd_properties); |
| dc->vmsd = &vmstate_scsi_disk_state; |
| } |
| |
| static const TypeInfo scsi_hd_info = { |
| .name = "scsi-hd", |
| .parent = TYPE_SCSI_DISK_BASE, |
| .class_init = scsi_hd_class_initfn, |
| }; |
| |
| static Property scsi_cd_properties[] = { |
| DEFINE_SCSI_DISK_PROPERTIES(), |
| DEFINE_PROP_UINT64("wwn", SCSIDiskState, qdev.wwn, 0), |
| DEFINE_PROP_UINT64("port_wwn", SCSIDiskState, qdev.port_wwn, 0), |
| DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0), |
| DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, |
| DEFAULT_MAX_IO_SIZE), |
| DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, |
| 5), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void scsi_cd_class_initfn(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); |
| |
| sc->realize = scsi_cd_realize; |
| sc->alloc_req = scsi_new_request; |
| sc->unit_attention_reported = scsi_disk_unit_attention_reported; |
| dc->desc = "virtual SCSI CD-ROM"; |
| device_class_set_props(dc, scsi_cd_properties); |
| dc->vmsd = &vmstate_scsi_disk_state; |
| } |
| |
| static const TypeInfo scsi_cd_info = { |
| .name = "scsi-cd", |
| .parent = TYPE_SCSI_DISK_BASE, |
| .class_init = scsi_cd_class_initfn, |
| }; |
| |
| #ifdef __linux__ |
| static Property scsi_block_properties[] = { |
| DEFINE_BLOCK_ERROR_PROPERTIES(SCSIDiskState, qdev.conf), |
| DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.blk), |
| DEFINE_PROP_BOOL("share-rw", SCSIDiskState, qdev.conf.share_rw, false), |
| DEFINE_PROP_UINT16("rotation_rate", SCSIDiskState, rotation_rate, 0), |
| DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size, |
| DEFAULT_MAX_UNMAP_SIZE), |
| DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, |
| DEFAULT_MAX_IO_SIZE), |
| DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, |
| -1), |
| DEFINE_PROP_UINT32("io_timeout", SCSIDiskState, qdev.io_timeout, |
| DEFAULT_IO_TIMEOUT), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void scsi_block_class_initfn(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); |
| SCSIDiskClass *sdc = SCSI_DISK_BASE_CLASS(klass); |
| |
| sc->realize = scsi_block_realize; |
| sc->alloc_req = scsi_block_new_request; |
| sc->parse_cdb = scsi_block_parse_cdb; |
| sdc->dma_readv = scsi_block_dma_readv; |
| sdc->dma_writev = scsi_block_dma_writev; |
| sdc->update_sense = scsi_block_update_sense; |
| sdc->need_fua_emulation = scsi_block_no_fua; |
| dc->desc = "SCSI block device passthrough"; |
| device_class_set_props(dc, scsi_block_properties); |
| dc->vmsd = &vmstate_scsi_disk_state; |
| } |
| |
| static const TypeInfo scsi_block_info = { |
| .name = "scsi-block", |
| .parent = TYPE_SCSI_DISK_BASE, |
| .class_init = scsi_block_class_initfn, |
| }; |
| #endif |
| |
| static void scsi_disk_register_types(void) |
| { |
| type_register_static(&scsi_disk_base_info); |
| type_register_static(&scsi_hd_info); |
| type_register_static(&scsi_cd_info); |
| #ifdef __linux__ |
| type_register_static(&scsi_block_info); |
| #endif |
| } |
| |
| type_init(scsi_disk_register_types) |