| /* |
| * QEMU ESP/NCR53C9x emulation |
| * |
| * Copyright (c) 2005-2006 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "sysbus.h" |
| #include "scsi.h" |
| #include "esp.h" |
| #include "trace.h" |
| |
| /* |
| * On Sparc32, this is the ESP (NCR53C90) part of chip STP2000 (Master I/O), |
| * also produced as NCR89C100. See |
| * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt |
| * and |
| * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt |
| */ |
| |
| #define ESP_ERROR(fmt, ...) \ |
| do { printf("ESP ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0) |
| |
| #define ESP_REGS 16 |
| #define TI_BUFSZ 16 |
| |
| typedef struct ESPState ESPState; |
| |
| struct ESPState { |
| SysBusDevice busdev; |
| MemoryRegion iomem; |
| uint8_t rregs[ESP_REGS]; |
| uint8_t wregs[ESP_REGS]; |
| qemu_irq irq; |
| uint32_t it_shift; |
| int32_t ti_size; |
| uint32_t ti_rptr, ti_wptr; |
| uint32_t status; |
| uint32_t dma; |
| uint8_t ti_buf[TI_BUFSZ]; |
| SCSIBus bus; |
| SCSIDevice *current_dev; |
| SCSIRequest *current_req; |
| uint8_t cmdbuf[TI_BUFSZ]; |
| uint32_t cmdlen; |
| uint32_t do_cmd; |
| |
| /* The amount of data left in the current DMA transfer. */ |
| uint32_t dma_left; |
| /* The size of the current DMA transfer. Zero if no transfer is in |
| progress. */ |
| uint32_t dma_counter; |
| int dma_enabled; |
| |
| uint32_t async_len; |
| uint8_t *async_buf; |
| |
| ESPDMAMemoryReadWriteFunc dma_memory_read; |
| ESPDMAMemoryReadWriteFunc dma_memory_write; |
| void *dma_opaque; |
| void (*dma_cb)(ESPState *s); |
| }; |
| |
| #define ESP_TCLO 0x0 |
| #define ESP_TCMID 0x1 |
| #define ESP_FIFO 0x2 |
| #define ESP_CMD 0x3 |
| #define ESP_RSTAT 0x4 |
| #define ESP_WBUSID 0x4 |
| #define ESP_RINTR 0x5 |
| #define ESP_WSEL 0x5 |
| #define ESP_RSEQ 0x6 |
| #define ESP_WSYNTP 0x6 |
| #define ESP_RFLAGS 0x7 |
| #define ESP_WSYNO 0x7 |
| #define ESP_CFG1 0x8 |
| #define ESP_RRES1 0x9 |
| #define ESP_WCCF 0x9 |
| #define ESP_RRES2 0xa |
| #define ESP_WTEST 0xa |
| #define ESP_CFG2 0xb |
| #define ESP_CFG3 0xc |
| #define ESP_RES3 0xd |
| #define ESP_TCHI 0xe |
| #define ESP_RES4 0xf |
| |
| #define CMD_DMA 0x80 |
| #define CMD_CMD 0x7f |
| |
| #define CMD_NOP 0x00 |
| #define CMD_FLUSH 0x01 |
| #define CMD_RESET 0x02 |
| #define CMD_BUSRESET 0x03 |
| #define CMD_TI 0x10 |
| #define CMD_ICCS 0x11 |
| #define CMD_MSGACC 0x12 |
| #define CMD_PAD 0x18 |
| #define CMD_SATN 0x1a |
| #define CMD_SEL 0x41 |
| #define CMD_SELATN 0x42 |
| #define CMD_SELATNS 0x43 |
| #define CMD_ENSEL 0x44 |
| |
| #define STAT_DO 0x00 |
| #define STAT_DI 0x01 |
| #define STAT_CD 0x02 |
| #define STAT_ST 0x03 |
| #define STAT_MO 0x06 |
| #define STAT_MI 0x07 |
| #define STAT_PIO_MASK 0x06 |
| |
| #define STAT_TC 0x10 |
| #define STAT_PE 0x20 |
| #define STAT_GE 0x40 |
| #define STAT_INT 0x80 |
| |
| #define BUSID_DID 0x07 |
| |
| #define INTR_FC 0x08 |
| #define INTR_BS 0x10 |
| #define INTR_DC 0x20 |
| #define INTR_RST 0x80 |
| |
| #define SEQ_0 0x0 |
| #define SEQ_CD 0x4 |
| |
| #define CFG1_RESREPT 0x40 |
| |
| #define TCHI_FAS100A 0x4 |
| |
| static void esp_raise_irq(ESPState *s) |
| { |
| if (!(s->rregs[ESP_RSTAT] & STAT_INT)) { |
| s->rregs[ESP_RSTAT] |= STAT_INT; |
| qemu_irq_raise(s->irq); |
| trace_esp_raise_irq(); |
| } |
| } |
| |
| static void esp_lower_irq(ESPState *s) |
| { |
| if (s->rregs[ESP_RSTAT] & STAT_INT) { |
| s->rregs[ESP_RSTAT] &= ~STAT_INT; |
| qemu_irq_lower(s->irq); |
| trace_esp_lower_irq(); |
| } |
| } |
| |
| static void esp_dma_enable(void *opaque, int irq, int level) |
| { |
| DeviceState *d = opaque; |
| ESPState *s = container_of(d, ESPState, busdev.qdev); |
| |
| if (level) { |
| s->dma_enabled = 1; |
| trace_esp_dma_enable(); |
| if (s->dma_cb) { |
| s->dma_cb(s); |
| s->dma_cb = NULL; |
| } |
| } else { |
| trace_esp_dma_disable(); |
| s->dma_enabled = 0; |
| } |
| } |
| |
| static void esp_request_cancelled(SCSIRequest *req) |
| { |
| ESPState *s = DO_UPCAST(ESPState, busdev.qdev, req->bus->qbus.parent); |
| |
| if (req == s->current_req) { |
| scsi_req_unref(s->current_req); |
| s->current_req = NULL; |
| s->current_dev = NULL; |
| } |
| } |
| |
| static uint32_t get_cmd(ESPState *s, uint8_t *buf) |
| { |
| uint32_t dmalen; |
| int target; |
| |
| target = s->wregs[ESP_WBUSID] & BUSID_DID; |
| if (s->dma) { |
| dmalen = s->rregs[ESP_TCLO] | (s->rregs[ESP_TCMID] << 8); |
| s->dma_memory_read(s->dma_opaque, buf, dmalen); |
| } else { |
| dmalen = s->ti_size; |
| memcpy(buf, s->ti_buf, dmalen); |
| buf[0] = buf[2] >> 5; |
| } |
| trace_esp_get_cmd(dmalen, target); |
| |
| s->ti_size = 0; |
| s->ti_rptr = 0; |
| s->ti_wptr = 0; |
| |
| if (s->current_req) { |
| /* Started a new command before the old one finished. Cancel it. */ |
| scsi_req_cancel(s->current_req); |
| s->async_len = 0; |
| } |
| |
| s->current_dev = scsi_device_find(&s->bus, 0, target, 0); |
| if (!s->current_dev) { |
| // No such drive |
| s->rregs[ESP_RSTAT] = 0; |
| s->rregs[ESP_RINTR] = INTR_DC; |
| s->rregs[ESP_RSEQ] = SEQ_0; |
| esp_raise_irq(s); |
| return 0; |
| } |
| return dmalen; |
| } |
| |
| static void do_busid_cmd(ESPState *s, uint8_t *buf, uint8_t busid) |
| { |
| int32_t datalen; |
| int lun; |
| SCSIDevice *current_lun; |
| |
| trace_esp_do_busid_cmd(busid); |
| lun = busid & 7; |
| current_lun = scsi_device_find(&s->bus, 0, s->current_dev->id, lun); |
| s->current_req = scsi_req_new(current_lun, 0, lun, buf, NULL); |
| datalen = scsi_req_enqueue(s->current_req); |
| s->ti_size = datalen; |
| if (datalen != 0) { |
| s->rregs[ESP_RSTAT] = STAT_TC; |
| s->dma_left = 0; |
| s->dma_counter = 0; |
| if (datalen > 0) { |
| s->rregs[ESP_RSTAT] |= STAT_DI; |
| } else { |
| s->rregs[ESP_RSTAT] |= STAT_DO; |
| } |
| scsi_req_continue(s->current_req); |
| } |
| s->rregs[ESP_RINTR] = INTR_BS | INTR_FC; |
| s->rregs[ESP_RSEQ] = SEQ_CD; |
| esp_raise_irq(s); |
| } |
| |
| static void do_cmd(ESPState *s, uint8_t *buf) |
| { |
| uint8_t busid = buf[0]; |
| |
| do_busid_cmd(s, &buf[1], busid); |
| } |
| |
| static void handle_satn(ESPState *s) |
| { |
| uint8_t buf[32]; |
| int len; |
| |
| if (!s->dma_enabled) { |
| s->dma_cb = handle_satn; |
| return; |
| } |
| len = get_cmd(s, buf); |
| if (len) |
| do_cmd(s, buf); |
| } |
| |
| static void handle_s_without_atn(ESPState *s) |
| { |
| uint8_t buf[32]; |
| int len; |
| |
| if (!s->dma_enabled) { |
| s->dma_cb = handle_s_without_atn; |
| return; |
| } |
| len = get_cmd(s, buf); |
| if (len) { |
| do_busid_cmd(s, buf, 0); |
| } |
| } |
| |
| static void handle_satn_stop(ESPState *s) |
| { |
| if (!s->dma_enabled) { |
| s->dma_cb = handle_satn_stop; |
| return; |
| } |
| s->cmdlen = get_cmd(s, s->cmdbuf); |
| if (s->cmdlen) { |
| trace_esp_handle_satn_stop(s->cmdlen); |
| s->do_cmd = 1; |
| s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD; |
| s->rregs[ESP_RINTR] = INTR_BS | INTR_FC; |
| s->rregs[ESP_RSEQ] = SEQ_CD; |
| esp_raise_irq(s); |
| } |
| } |
| |
| static void write_response(ESPState *s) |
| { |
| trace_esp_write_response(s->status); |
| s->ti_buf[0] = s->status; |
| s->ti_buf[1] = 0; |
| if (s->dma) { |
| s->dma_memory_write(s->dma_opaque, s->ti_buf, 2); |
| s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST; |
| s->rregs[ESP_RINTR] = INTR_BS | INTR_FC; |
| s->rregs[ESP_RSEQ] = SEQ_CD; |
| } else { |
| s->ti_size = 2; |
| s->ti_rptr = 0; |
| s->ti_wptr = 0; |
| s->rregs[ESP_RFLAGS] = 2; |
| } |
| esp_raise_irq(s); |
| } |
| |
| static void esp_dma_done(ESPState *s) |
| { |
| s->rregs[ESP_RSTAT] |= STAT_TC; |
| s->rregs[ESP_RINTR] = INTR_BS; |
| s->rregs[ESP_RSEQ] = 0; |
| s->rregs[ESP_RFLAGS] = 0; |
| s->rregs[ESP_TCLO] = 0; |
| s->rregs[ESP_TCMID] = 0; |
| esp_raise_irq(s); |
| } |
| |
| static void esp_do_dma(ESPState *s) |
| { |
| uint32_t len; |
| int to_device; |
| |
| to_device = (s->ti_size < 0); |
| len = s->dma_left; |
| if (s->do_cmd) { |
| trace_esp_do_dma(s->cmdlen, len); |
| s->dma_memory_read(s->dma_opaque, &s->cmdbuf[s->cmdlen], len); |
| s->ti_size = 0; |
| s->cmdlen = 0; |
| s->do_cmd = 0; |
| do_cmd(s, s->cmdbuf); |
| return; |
| } |
| if (s->async_len == 0) { |
| /* Defer until data is available. */ |
| return; |
| } |
| if (len > s->async_len) { |
| len = s->async_len; |
| } |
| if (to_device) { |
| s->dma_memory_read(s->dma_opaque, s->async_buf, len); |
| } else { |
| s->dma_memory_write(s->dma_opaque, s->async_buf, len); |
| } |
| s->dma_left -= len; |
| s->async_buf += len; |
| s->async_len -= len; |
| if (to_device) |
| s->ti_size += len; |
| else |
| s->ti_size -= len; |
| if (s->async_len == 0) { |
| scsi_req_continue(s->current_req); |
| /* If there is still data to be read from the device then |
| complete the DMA operation immediately. Otherwise defer |
| until the scsi layer has completed. */ |
| if (to_device || s->dma_left != 0 || s->ti_size == 0) { |
| return; |
| } |
| } |
| |
| /* Partially filled a scsi buffer. Complete immediately. */ |
| esp_dma_done(s); |
| } |
| |
| static void esp_command_complete(SCSIRequest *req, uint32_t status) |
| { |
| ESPState *s = DO_UPCAST(ESPState, busdev.qdev, req->bus->qbus.parent); |
| |
| trace_esp_command_complete(); |
| if (s->ti_size != 0) { |
| trace_esp_command_complete_unexpected(); |
| } |
| s->ti_size = 0; |
| s->dma_left = 0; |
| s->async_len = 0; |
| if (status) { |
| trace_esp_command_complete_fail(); |
| } |
| s->status = status; |
| s->rregs[ESP_RSTAT] = STAT_ST; |
| esp_dma_done(s); |
| if (s->current_req) { |
| scsi_req_unref(s->current_req); |
| s->current_req = NULL; |
| s->current_dev = NULL; |
| } |
| } |
| |
| static void esp_transfer_data(SCSIRequest *req, uint32_t len) |
| { |
| ESPState *s = DO_UPCAST(ESPState, busdev.qdev, req->bus->qbus.parent); |
| |
| trace_esp_transfer_data(s->dma_left, s->ti_size); |
| s->async_len = len; |
| s->async_buf = scsi_req_get_buf(req); |
| if (s->dma_left) { |
| esp_do_dma(s); |
| } else if (s->dma_counter != 0 && s->ti_size <= 0) { |
| /* If this was the last part of a DMA transfer then the |
| completion interrupt is deferred to here. */ |
| esp_dma_done(s); |
| } |
| } |
| |
| static void handle_ti(ESPState *s) |
| { |
| uint32_t dmalen, minlen; |
| |
| dmalen = s->rregs[ESP_TCLO] | (s->rregs[ESP_TCMID] << 8); |
| if (dmalen==0) { |
| dmalen=0x10000; |
| } |
| s->dma_counter = dmalen; |
| |
| if (s->do_cmd) |
| minlen = (dmalen < 32) ? dmalen : 32; |
| else if (s->ti_size < 0) |
| minlen = (dmalen < -s->ti_size) ? dmalen : -s->ti_size; |
| else |
| minlen = (dmalen < s->ti_size) ? dmalen : s->ti_size; |
| trace_esp_handle_ti(minlen); |
| if (s->dma) { |
| s->dma_left = minlen; |
| s->rregs[ESP_RSTAT] &= ~STAT_TC; |
| esp_do_dma(s); |
| } else if (s->do_cmd) { |
| trace_esp_handle_ti_cmd(s->cmdlen); |
| s->ti_size = 0; |
| s->cmdlen = 0; |
| s->do_cmd = 0; |
| do_cmd(s, s->cmdbuf); |
| return; |
| } |
| } |
| |
| static void esp_hard_reset(DeviceState *d) |
| { |
| ESPState *s = container_of(d, ESPState, busdev.qdev); |
| |
| memset(s->rregs, 0, ESP_REGS); |
| memset(s->wregs, 0, ESP_REGS); |
| s->rregs[ESP_TCHI] = TCHI_FAS100A; // Indicate fas100a |
| s->ti_size = 0; |
| s->ti_rptr = 0; |
| s->ti_wptr = 0; |
| s->dma = 0; |
| s->do_cmd = 0; |
| s->dma_cb = NULL; |
| |
| s->rregs[ESP_CFG1] = 7; |
| } |
| |
| static void esp_soft_reset(DeviceState *d) |
| { |
| ESPState *s = container_of(d, ESPState, busdev.qdev); |
| |
| qemu_irq_lower(s->irq); |
| esp_hard_reset(d); |
| } |
| |
| static void parent_esp_reset(void *opaque, int irq, int level) |
| { |
| if (level) { |
| esp_soft_reset(opaque); |
| } |
| } |
| |
| static void esp_gpio_demux(void *opaque, int irq, int level) |
| { |
| switch (irq) { |
| case 0: |
| parent_esp_reset(opaque, irq, level); |
| break; |
| case 1: |
| esp_dma_enable(opaque, irq, level); |
| break; |
| } |
| } |
| |
| static uint64_t esp_mem_read(void *opaque, target_phys_addr_t addr, |
| unsigned size) |
| { |
| ESPState *s = opaque; |
| uint32_t saddr, old_val; |
| |
| saddr = addr >> s->it_shift; |
| trace_esp_mem_readb(saddr, s->rregs[saddr]); |
| switch (saddr) { |
| case ESP_FIFO: |
| if (s->ti_size > 0) { |
| s->ti_size--; |
| if ((s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) { |
| /* Data out. */ |
| ESP_ERROR("PIO data read not implemented\n"); |
| s->rregs[ESP_FIFO] = 0; |
| } else { |
| s->rregs[ESP_FIFO] = s->ti_buf[s->ti_rptr++]; |
| } |
| esp_raise_irq(s); |
| } |
| if (s->ti_size == 0) { |
| s->ti_rptr = 0; |
| s->ti_wptr = 0; |
| } |
| break; |
| case ESP_RINTR: |
| /* Clear sequence step, interrupt register and all status bits |
| except TC */ |
| old_val = s->rregs[ESP_RINTR]; |
| s->rregs[ESP_RINTR] = 0; |
| s->rregs[ESP_RSTAT] &= ~STAT_TC; |
| s->rregs[ESP_RSEQ] = SEQ_CD; |
| esp_lower_irq(s); |
| |
| return old_val; |
| default: |
| break; |
| } |
| return s->rregs[saddr]; |
| } |
| |
| static void esp_mem_write(void *opaque, target_phys_addr_t addr, |
| uint64_t val, unsigned size) |
| { |
| ESPState *s = opaque; |
| uint32_t saddr; |
| |
| saddr = addr >> s->it_shift; |
| trace_esp_mem_writeb(saddr, s->wregs[saddr], val); |
| switch (saddr) { |
| case ESP_TCLO: |
| case ESP_TCMID: |
| s->rregs[ESP_RSTAT] &= ~STAT_TC; |
| break; |
| case ESP_FIFO: |
| if (s->do_cmd) { |
| s->cmdbuf[s->cmdlen++] = val & 0xff; |
| } else if (s->ti_size == TI_BUFSZ - 1) { |
| ESP_ERROR("fifo overrun\n"); |
| } else { |
| s->ti_size++; |
| s->ti_buf[s->ti_wptr++] = val & 0xff; |
| } |
| break; |
| case ESP_CMD: |
| s->rregs[saddr] = val; |
| if (val & CMD_DMA) { |
| s->dma = 1; |
| /* Reload DMA counter. */ |
| s->rregs[ESP_TCLO] = s->wregs[ESP_TCLO]; |
| s->rregs[ESP_TCMID] = s->wregs[ESP_TCMID]; |
| } else { |
| s->dma = 0; |
| } |
| switch(val & CMD_CMD) { |
| case CMD_NOP: |
| trace_esp_mem_writeb_cmd_nop(val); |
| break; |
| case CMD_FLUSH: |
| trace_esp_mem_writeb_cmd_flush(val); |
| //s->ti_size = 0; |
| s->rregs[ESP_RINTR] = INTR_FC; |
| s->rregs[ESP_RSEQ] = 0; |
| s->rregs[ESP_RFLAGS] = 0; |
| break; |
| case CMD_RESET: |
| trace_esp_mem_writeb_cmd_reset(val); |
| esp_soft_reset(&s->busdev.qdev); |
| break; |
| case CMD_BUSRESET: |
| trace_esp_mem_writeb_cmd_bus_reset(val); |
| s->rregs[ESP_RINTR] = INTR_RST; |
| if (!(s->wregs[ESP_CFG1] & CFG1_RESREPT)) { |
| esp_raise_irq(s); |
| } |
| break; |
| case CMD_TI: |
| handle_ti(s); |
| break; |
| case CMD_ICCS: |
| trace_esp_mem_writeb_cmd_iccs(val); |
| write_response(s); |
| s->rregs[ESP_RINTR] = INTR_FC; |
| s->rregs[ESP_RSTAT] |= STAT_MI; |
| break; |
| case CMD_MSGACC: |
| trace_esp_mem_writeb_cmd_msgacc(val); |
| s->rregs[ESP_RINTR] = INTR_DC; |
| s->rregs[ESP_RSEQ] = 0; |
| s->rregs[ESP_RFLAGS] = 0; |
| esp_raise_irq(s); |
| break; |
| case CMD_PAD: |
| trace_esp_mem_writeb_cmd_pad(val); |
| s->rregs[ESP_RSTAT] = STAT_TC; |
| s->rregs[ESP_RINTR] = INTR_FC; |
| s->rregs[ESP_RSEQ] = 0; |
| break; |
| case CMD_SATN: |
| trace_esp_mem_writeb_cmd_satn(val); |
| break; |
| case CMD_SEL: |
| trace_esp_mem_writeb_cmd_sel(val); |
| handle_s_without_atn(s); |
| break; |
| case CMD_SELATN: |
| trace_esp_mem_writeb_cmd_selatn(val); |
| handle_satn(s); |
| break; |
| case CMD_SELATNS: |
| trace_esp_mem_writeb_cmd_selatns(val); |
| handle_satn_stop(s); |
| break; |
| case CMD_ENSEL: |
| trace_esp_mem_writeb_cmd_ensel(val); |
| s->rregs[ESP_RINTR] = 0; |
| break; |
| default: |
| ESP_ERROR("Unhandled ESP command (%2.2x)\n", (unsigned)val); |
| break; |
| } |
| break; |
| case ESP_WBUSID ... ESP_WSYNO: |
| break; |
| case ESP_CFG1: |
| s->rregs[saddr] = val; |
| break; |
| case ESP_WCCF ... ESP_WTEST: |
| break; |
| case ESP_CFG2 ... ESP_RES4: |
| s->rregs[saddr] = val; |
| break; |
| default: |
| ESP_ERROR("invalid write of 0x%02x at [0x%x]\n", (unsigned)val, saddr); |
| return; |
| } |
| s->wregs[saddr] = val; |
| } |
| |
| static bool esp_mem_accepts(void *opaque, target_phys_addr_t addr, |
| unsigned size, bool is_write) |
| { |
| return (size == 1) || (is_write && size == 4); |
| } |
| |
| static const MemoryRegionOps esp_mem_ops = { |
| .read = esp_mem_read, |
| .write = esp_mem_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid.accepts = esp_mem_accepts, |
| }; |
| |
| static const VMStateDescription vmstate_esp = { |
| .name ="esp", |
| .version_id = 3, |
| .minimum_version_id = 3, |
| .minimum_version_id_old = 3, |
| .fields = (VMStateField []) { |
| VMSTATE_BUFFER(rregs, ESPState), |
| VMSTATE_BUFFER(wregs, ESPState), |
| VMSTATE_INT32(ti_size, ESPState), |
| VMSTATE_UINT32(ti_rptr, ESPState), |
| VMSTATE_UINT32(ti_wptr, ESPState), |
| VMSTATE_BUFFER(ti_buf, ESPState), |
| VMSTATE_UINT32(status, ESPState), |
| VMSTATE_UINT32(dma, ESPState), |
| VMSTATE_BUFFER(cmdbuf, ESPState), |
| VMSTATE_UINT32(cmdlen, ESPState), |
| VMSTATE_UINT32(do_cmd, ESPState), |
| VMSTATE_UINT32(dma_left, ESPState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| void esp_init(target_phys_addr_t espaddr, int it_shift, |
| ESPDMAMemoryReadWriteFunc dma_memory_read, |
| ESPDMAMemoryReadWriteFunc dma_memory_write, |
| void *dma_opaque, qemu_irq irq, qemu_irq *reset, |
| qemu_irq *dma_enable) |
| { |
| DeviceState *dev; |
| SysBusDevice *s; |
| ESPState *esp; |
| |
| dev = qdev_create(NULL, "esp"); |
| esp = DO_UPCAST(ESPState, busdev.qdev, dev); |
| esp->dma_memory_read = dma_memory_read; |
| esp->dma_memory_write = dma_memory_write; |
| esp->dma_opaque = dma_opaque; |
| esp->it_shift = it_shift; |
| /* XXX for now until rc4030 has been changed to use DMA enable signal */ |
| esp->dma_enabled = 1; |
| qdev_init_nofail(dev); |
| s = sysbus_from_qdev(dev); |
| sysbus_connect_irq(s, 0, irq); |
| sysbus_mmio_map(s, 0, espaddr); |
| *reset = qdev_get_gpio_in(dev, 0); |
| *dma_enable = qdev_get_gpio_in(dev, 1); |
| } |
| |
| static const struct SCSIBusInfo esp_scsi_info = { |
| .tcq = false, |
| .max_target = ESP_MAX_DEVS, |
| .max_lun = 7, |
| |
| .transfer_data = esp_transfer_data, |
| .complete = esp_command_complete, |
| .cancel = esp_request_cancelled |
| }; |
| |
| static int esp_init1(SysBusDevice *dev) |
| { |
| ESPState *s = FROM_SYSBUS(ESPState, dev); |
| |
| sysbus_init_irq(dev, &s->irq); |
| assert(s->it_shift != -1); |
| |
| memory_region_init_io(&s->iomem, &esp_mem_ops, s, |
| "esp", ESP_REGS << s->it_shift); |
| sysbus_init_mmio(dev, &s->iomem); |
| |
| qdev_init_gpio_in(&dev->qdev, esp_gpio_demux, 2); |
| |
| scsi_bus_new(&s->bus, &dev->qdev, &esp_scsi_info); |
| return scsi_bus_legacy_handle_cmdline(&s->bus); |
| } |
| |
| static SysBusDeviceInfo esp_info = { |
| .init = esp_init1, |
| .qdev.name = "esp", |
| .qdev.size = sizeof(ESPState), |
| .qdev.vmsd = &vmstate_esp, |
| .qdev.reset = esp_hard_reset, |
| .qdev.props = (Property[]) { |
| {.name = NULL} |
| } |
| }; |
| |
| static void esp_register_devices(void) |
| { |
| sysbus_register_withprop(&esp_info); |
| } |
| |
| device_init(esp_register_devices) |