| /* |
| * QEMU Sparc SLAVIO interrupt controller emulation |
| * |
| * Copyright (c) 2003-2005 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "vl.h" |
| //#define DEBUG_IRQ_COUNT |
| //#define DEBUG_IRQ |
| |
| #ifdef DEBUG_IRQ |
| #define DPRINTF(fmt, args...) \ |
| do { printf("IRQ: " fmt , ##args); } while (0) |
| #else |
| #define DPRINTF(fmt, args...) |
| #endif |
| |
| /* |
| * Registers of interrupt controller in sun4m. |
| * |
| * This is the interrupt controller part of chip STP2001 (Slave I/O), also |
| * produced as NCR89C105. See |
| * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt |
| * |
| * There is a system master controller and one for each cpu. |
| * |
| */ |
| |
| #define MAX_CPUS 16 |
| #define MAX_PILS 16 |
| |
| typedef struct SLAVIO_INTCTLState { |
| uint32_t intreg_pending[MAX_CPUS]; |
| uint32_t intregm_pending; |
| uint32_t intregm_disabled; |
| uint32_t target_cpu; |
| #ifdef DEBUG_IRQ_COUNT |
| uint64_t irq_count[32]; |
| #endif |
| qemu_irq *cpu_irqs[MAX_CPUS]; |
| const uint32_t *intbit_to_level; |
| uint32_t cputimer_bit; |
| uint32_t pil_out[MAX_CPUS]; |
| } SLAVIO_INTCTLState; |
| |
| #define INTCTL_MAXADDR 0xf |
| #define INTCTL_SIZE (INTCTL_MAXADDR + 1) |
| #define INTCTLM_MAXADDR 0x13 |
| #define INTCTLM_SIZE (INTCTLM_MAXADDR + 1) |
| #define INTCTLM_MASK 0x1f |
| static void slavio_check_interrupts(void *opaque); |
| |
| // per-cpu interrupt controller |
| static uint32_t slavio_intctl_mem_readl(void *opaque, target_phys_addr_t addr) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t saddr, ret; |
| int cpu; |
| |
| cpu = (addr & (MAX_CPUS - 1) * TARGET_PAGE_SIZE) >> 12; |
| saddr = (addr & INTCTL_MAXADDR) >> 2; |
| switch (saddr) { |
| case 0: |
| ret = s->intreg_pending[cpu]; |
| break; |
| default: |
| ret = 0; |
| break; |
| } |
| DPRINTF("read cpu %d reg 0x" TARGET_FMT_plx " = %x\n", cpu, addr, ret); |
| |
| return ret; |
| } |
| |
| static void slavio_intctl_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t saddr; |
| int cpu; |
| |
| cpu = (addr & (MAX_CPUS - 1) * TARGET_PAGE_SIZE) >> 12; |
| saddr = (addr & INTCTL_MAXADDR) >> 2; |
| DPRINTF("write cpu %d reg 0x" TARGET_FMT_plx " = %x\n", cpu, addr, val); |
| switch (saddr) { |
| case 1: // clear pending softints |
| if (val & 0x4000) |
| val |= 80000000; |
| val &= 0xfffe0000; |
| s->intreg_pending[cpu] &= ~val; |
| slavio_check_interrupts(s); |
| DPRINTF("Cleared cpu %d irq mask %x, curmask %x\n", cpu, val, s->intreg_pending[cpu]); |
| break; |
| case 2: // set softint |
| val &= 0xfffe0000; |
| s->intreg_pending[cpu] |= val; |
| slavio_check_interrupts(s); |
| DPRINTF("Set cpu %d irq mask %x, curmask %x\n", cpu, val, s->intreg_pending[cpu]); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static CPUReadMemoryFunc *slavio_intctl_mem_read[3] = { |
| slavio_intctl_mem_readl, |
| slavio_intctl_mem_readl, |
| slavio_intctl_mem_readl, |
| }; |
| |
| static CPUWriteMemoryFunc *slavio_intctl_mem_write[3] = { |
| slavio_intctl_mem_writel, |
| slavio_intctl_mem_writel, |
| slavio_intctl_mem_writel, |
| }; |
| |
| // master system interrupt controller |
| static uint32_t slavio_intctlm_mem_readl(void *opaque, target_phys_addr_t addr) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t saddr, ret; |
| |
| saddr = (addr & INTCTLM_MAXADDR) >> 2; |
| switch (saddr) { |
| case 0: |
| ret = s->intregm_pending & 0x7fffffff; |
| break; |
| case 1: |
| ret = s->intregm_disabled; |
| break; |
| case 4: |
| ret = s->target_cpu; |
| break; |
| default: |
| ret = 0; |
| break; |
| } |
| DPRINTF("read system reg 0x" TARGET_FMT_plx " = %x\n", addr, ret); |
| |
| return ret; |
| } |
| |
| static void slavio_intctlm_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t saddr; |
| |
| saddr = (addr & INTCTLM_MASK) >> 2; |
| DPRINTF("write system reg 0x" TARGET_FMT_plx " = %x\n", addr, val); |
| switch (saddr) { |
| case 2: // clear (enable) |
| // Force clear unused bits |
| val &= ~0x4fb2007f; |
| s->intregm_disabled &= ~val; |
| DPRINTF("Enabled master irq mask %x, curmask %x\n", val, s->intregm_disabled); |
| slavio_check_interrupts(s); |
| break; |
| case 3: // set (disable, clear pending) |
| // Force clear unused bits |
| val &= ~0x4fb2007f; |
| s->intregm_disabled |= val; |
| s->intregm_pending &= ~val; |
| slavio_check_interrupts(s); |
| DPRINTF("Disabled master irq mask %x, curmask %x\n", val, s->intregm_disabled); |
| break; |
| case 4: |
| s->target_cpu = val & (MAX_CPUS - 1); |
| slavio_check_interrupts(s); |
| DPRINTF("Set master irq cpu %d\n", s->target_cpu); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static CPUReadMemoryFunc *slavio_intctlm_mem_read[3] = { |
| slavio_intctlm_mem_readl, |
| slavio_intctlm_mem_readl, |
| slavio_intctlm_mem_readl, |
| }; |
| |
| static CPUWriteMemoryFunc *slavio_intctlm_mem_write[3] = { |
| slavio_intctlm_mem_writel, |
| slavio_intctlm_mem_writel, |
| slavio_intctlm_mem_writel, |
| }; |
| |
| void slavio_pic_info(void *opaque) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| int i; |
| |
| for (i = 0; i < MAX_CPUS; i++) { |
| term_printf("per-cpu %d: pending 0x%08x\n", i, s->intreg_pending[i]); |
| } |
| term_printf("master: pending 0x%08x, disabled 0x%08x\n", s->intregm_pending, s->intregm_disabled); |
| } |
| |
| void slavio_irq_info(void *opaque) |
| { |
| #ifndef DEBUG_IRQ_COUNT |
| term_printf("irq statistic code not compiled.\n"); |
| #else |
| SLAVIO_INTCTLState *s = opaque; |
| int i; |
| int64_t count; |
| |
| term_printf("IRQ statistics:\n"); |
| for (i = 0; i < 32; i++) { |
| count = s->irq_count[i]; |
| if (count > 0) |
| term_printf("%2d: %" PRId64 "\n", i, count); |
| } |
| #endif |
| } |
| |
| static void slavio_check_interrupts(void *opaque) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t pending = s->intregm_pending, pil_pending; |
| unsigned int i, j; |
| |
| pending &= ~s->intregm_disabled; |
| |
| DPRINTF("pending %x disabled %x\n", pending, s->intregm_disabled); |
| for (i = 0; i < MAX_CPUS; i++) { |
| pil_pending = 0; |
| if (pending && !(s->intregm_disabled & 0x80000000) && |
| (i == s->target_cpu)) { |
| for (j = 0; j < 32; j++) { |
| if (pending & (1 << j)) |
| pil_pending |= 1 << s->intbit_to_level[j]; |
| } |
| } |
| pil_pending |= (s->intreg_pending[i] >> 16) & 0xfffe; |
| |
| for (j = 0; j < MAX_PILS; j++) { |
| if (pil_pending & (1 << j)) { |
| if (!(s->pil_out[i] & (1 << j))) |
| qemu_irq_raise(s->cpu_irqs[i][j]); |
| } else { |
| if (s->pil_out[i] & (1 << j)) |
| qemu_irq_lower(s->cpu_irqs[i][j]); |
| } |
| } |
| s->pil_out[i] = pil_pending; |
| } |
| } |
| |
| /* |
| * "irq" here is the bit number in the system interrupt register to |
| * separate serial and keyboard interrupts sharing a level. |
| */ |
| static void slavio_set_irq(void *opaque, int irq, int level) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t mask = 1 << irq; |
| uint32_t pil = s->intbit_to_level[irq]; |
| |
| DPRINTF("Set cpu %d irq %d -> pil %d level %d\n", s->target_cpu, irq, pil, |
| level); |
| if (pil > 0) { |
| if (level) { |
| #ifdef DEBUG_IRQ_COUNT |
| s->irq_count[pil]++; |
| #endif |
| s->intregm_pending |= mask; |
| s->intreg_pending[s->target_cpu] |= 1 << pil; |
| } else { |
| s->intregm_pending &= ~mask; |
| s->intreg_pending[s->target_cpu] &= ~(1 << pil); |
| } |
| slavio_check_interrupts(s); |
| } |
| } |
| |
| static void slavio_set_timer_irq_cpu(void *opaque, int cpu, int level) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| |
| DPRINTF("Set cpu %d local timer level %d\n", cpu, level); |
| |
| if (level) |
| s->intreg_pending[cpu] |= s->cputimer_bit; |
| else |
| s->intreg_pending[cpu] &= ~s->cputimer_bit; |
| |
| slavio_check_interrupts(s); |
| } |
| |
| static void slavio_intctl_save(QEMUFile *f, void *opaque) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| int i; |
| |
| for (i = 0; i < MAX_CPUS; i++) { |
| qemu_put_be32s(f, &s->intreg_pending[i]); |
| } |
| qemu_put_be32s(f, &s->intregm_pending); |
| qemu_put_be32s(f, &s->intregm_disabled); |
| qemu_put_be32s(f, &s->target_cpu); |
| } |
| |
| static int slavio_intctl_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| int i; |
| |
| if (version_id != 1) |
| return -EINVAL; |
| |
| for (i = 0; i < MAX_CPUS; i++) { |
| qemu_get_be32s(f, &s->intreg_pending[i]); |
| } |
| qemu_get_be32s(f, &s->intregm_pending); |
| qemu_get_be32s(f, &s->intregm_disabled); |
| qemu_get_be32s(f, &s->target_cpu); |
| slavio_check_interrupts(s); |
| return 0; |
| } |
| |
| static void slavio_intctl_reset(void *opaque) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| int i; |
| |
| for (i = 0; i < MAX_CPUS; i++) { |
| s->intreg_pending[i] = 0; |
| } |
| s->intregm_disabled = ~0xffb2007f; |
| s->intregm_pending = 0; |
| s->target_cpu = 0; |
| slavio_check_interrupts(s); |
| } |
| |
| void *slavio_intctl_init(target_phys_addr_t addr, target_phys_addr_t addrg, |
| const uint32_t *intbit_to_level, |
| qemu_irq **irq, qemu_irq **cpu_irq, |
| qemu_irq **parent_irq, unsigned int cputimer) |
| { |
| int slavio_intctl_io_memory, slavio_intctlm_io_memory, i; |
| SLAVIO_INTCTLState *s; |
| |
| s = qemu_mallocz(sizeof(SLAVIO_INTCTLState)); |
| if (!s) |
| return NULL; |
| |
| s->intbit_to_level = intbit_to_level; |
| for (i = 0; i < MAX_CPUS; i++) { |
| slavio_intctl_io_memory = cpu_register_io_memory(0, slavio_intctl_mem_read, slavio_intctl_mem_write, s); |
| cpu_register_physical_memory(addr + i * TARGET_PAGE_SIZE, INTCTL_SIZE, |
| slavio_intctl_io_memory); |
| s->cpu_irqs[i] = parent_irq[i]; |
| } |
| |
| slavio_intctlm_io_memory = cpu_register_io_memory(0, slavio_intctlm_mem_read, slavio_intctlm_mem_write, s); |
| cpu_register_physical_memory(addrg, INTCTLM_SIZE, slavio_intctlm_io_memory); |
| |
| register_savevm("slavio_intctl", addr, 1, slavio_intctl_save, slavio_intctl_load, s); |
| qemu_register_reset(slavio_intctl_reset, s); |
| *irq = qemu_allocate_irqs(slavio_set_irq, s, 32); |
| |
| *cpu_irq = qemu_allocate_irqs(slavio_set_timer_irq_cpu, s, MAX_CPUS); |
| s->cputimer_bit = 1 << s->intbit_to_level[cputimer]; |
| slavio_intctl_reset(s); |
| return s; |
| } |
| |