| /* |
| * QTest testcase for VirtIO Block Device |
| * |
| * Copyright (c) 2014 SUSE LINUX Products GmbH |
| * Copyright (c) 2014 Marc MarĂ |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "libqtest.h" |
| #include "libqos/libqos-pc.h" |
| #include "libqos/libqos-spapr.h" |
| #include "libqos/virtio.h" |
| #include "libqos/virtio-pci.h" |
| #include "libqos/virtio-mmio.h" |
| #include "libqos/malloc-generic.h" |
| #include "qemu/bswap.h" |
| #include "standard-headers/linux/virtio_ids.h" |
| #include "standard-headers/linux/virtio_config.h" |
| #include "standard-headers/linux/virtio_ring.h" |
| #include "standard-headers/linux/virtio_blk.h" |
| #include "standard-headers/linux/virtio_pci.h" |
| |
| #define TEST_IMAGE_SIZE (64 * 1024 * 1024) |
| #define QVIRTIO_BLK_TIMEOUT_US (30 * 1000 * 1000) |
| #define PCI_SLOT_HP 0x06 |
| #define PCI_SLOT 0x04 |
| #define PCI_FN 0x00 |
| |
| #define MMIO_PAGE_SIZE 4096 |
| #define MMIO_DEV_BASE_ADDR 0x0A003E00 |
| #define MMIO_RAM_ADDR 0x40000000 |
| #define MMIO_RAM_SIZE 0x20000000 |
| |
| typedef struct QVirtioBlkReq { |
| uint32_t type; |
| uint32_t ioprio; |
| uint64_t sector; |
| char *data; |
| uint8_t status; |
| } QVirtioBlkReq; |
| |
| static char *drive_create(void) |
| { |
| int fd, ret; |
| char *tmp_path = g_strdup("/tmp/qtest.XXXXXX"); |
| |
| /* Create a temporary raw image */ |
| fd = mkstemp(tmp_path); |
| g_assert_cmpint(fd, >=, 0); |
| ret = ftruncate(fd, TEST_IMAGE_SIZE); |
| g_assert_cmpint(ret, ==, 0); |
| close(fd); |
| |
| return tmp_path; |
| } |
| |
| static QOSState *pci_test_start(void) |
| { |
| QOSState *qs; |
| const char *arch = qtest_get_arch(); |
| char *tmp_path; |
| const char *cmd = "-drive if=none,id=drive0,file=%s,format=raw " |
| "-drive if=none,id=drive1,file=/dev/null,format=raw " |
| "-device virtio-blk-pci,id=drv0,drive=drive0," |
| "addr=%x.%x"; |
| |
| tmp_path = drive_create(); |
| |
| if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { |
| qs = qtest_pc_boot(cmd, tmp_path, PCI_SLOT, PCI_FN); |
| } else if (strcmp(arch, "ppc64") == 0) { |
| qs = qtest_spapr_boot(cmd, tmp_path, PCI_SLOT, PCI_FN); |
| } else { |
| g_printerr("virtio-blk tests are only available on x86 or ppc64\n"); |
| exit(EXIT_FAILURE); |
| } |
| unlink(tmp_path); |
| g_free(tmp_path); |
| return qs; |
| } |
| |
| static void arm_test_start(void) |
| { |
| char *cmdline; |
| char *tmp_path; |
| |
| tmp_path = drive_create(); |
| |
| cmdline = g_strdup_printf("-machine virt " |
| "-drive if=none,id=drive0,file=%s,format=raw " |
| "-device virtio-blk-device,drive=drive0", |
| tmp_path); |
| qtest_start(cmdline); |
| unlink(tmp_path); |
| g_free(tmp_path); |
| g_free(cmdline); |
| } |
| |
| static void test_end(void) |
| { |
| qtest_end(); |
| } |
| |
| static QVirtioPCIDevice *virtio_blk_pci_init(QPCIBus *bus, int slot) |
| { |
| QVirtioPCIDevice *dev; |
| |
| dev = qvirtio_pci_device_find(bus, VIRTIO_ID_BLOCK); |
| g_assert(dev != NULL); |
| g_assert_cmphex(dev->vdev.device_type, ==, VIRTIO_ID_BLOCK); |
| g_assert_cmphex(dev->pdev->devfn, ==, ((slot << 3) | PCI_FN)); |
| |
| qvirtio_pci_device_enable(dev); |
| qvirtio_reset(&dev->vdev); |
| qvirtio_set_acknowledge(&dev->vdev); |
| qvirtio_set_driver(&dev->vdev); |
| |
| return dev; |
| } |
| |
| static inline void virtio_blk_fix_request(QVirtioDevice *d, QVirtioBlkReq *req) |
| { |
| #ifdef HOST_WORDS_BIGENDIAN |
| const bool host_is_big_endian = true; |
| #else |
| const bool host_is_big_endian = false; |
| #endif |
| |
| if (qvirtio_is_big_endian(d) != host_is_big_endian) { |
| req->type = bswap32(req->type); |
| req->ioprio = bswap32(req->ioprio); |
| req->sector = bswap64(req->sector); |
| } |
| } |
| |
| static uint64_t virtio_blk_request(QGuestAllocator *alloc, QVirtioDevice *d, |
| QVirtioBlkReq *req, uint64_t data_size) |
| { |
| uint64_t addr; |
| uint8_t status = 0xFF; |
| |
| g_assert_cmpuint(data_size % 512, ==, 0); |
| addr = guest_alloc(alloc, sizeof(*req) + data_size); |
| |
| virtio_blk_fix_request(d, req); |
| |
| memwrite(addr, req, 16); |
| memwrite(addr + 16, req->data, data_size); |
| memwrite(addr + 16 + data_size, &status, sizeof(status)); |
| |
| return addr; |
| } |
| |
| static void test_basic(QVirtioDevice *dev, QGuestAllocator *alloc, |
| QVirtQueue *vq) |
| { |
| QVirtioBlkReq req; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| capacity = qvirtio_config_readq(dev, 0); |
| |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(dev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_INDIRECT_DESC) | |
| (1u << VIRTIO_RING_F_EVENT_IDX) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(dev, features); |
| |
| qvirtio_set_driver_ok(dev); |
| |
| /* Write and read with 3 descriptor layout */ |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 16, false, true); |
| qvirtqueue_add(vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 16, false, true); |
| qvirtqueue_add(vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| |
| if (features & (1u << VIRTIO_F_ANY_LAYOUT)) { |
| /* Write and read with 2 descriptor layout */ |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 528, false, true); |
| qvirtqueue_add(vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(alloc, dev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(vq, req_addr, 16, false, true); |
| qvirtqueue_add(vq, req_addr + 16, 513, true, false); |
| |
| qvirtqueue_kick(dev, vq, free_head); |
| |
| qvirtio_wait_queue_isr(dev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(alloc, req_addr); |
| } |
| } |
| |
| static void pci_basic(void) |
| { |
| QVirtioPCIDevice *dev; |
| QOSState *qs; |
| QVirtQueuePCI *vqpci; |
| |
| qs = pci_test_start(); |
| dev = virtio_blk_pci_init(qs->pcibus, PCI_SLOT); |
| |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, qs->alloc, 0); |
| |
| test_basic(&dev->vdev, qs->alloc, &vqpci->vq); |
| |
| /* End test */ |
| qvirtqueue_cleanup(dev->vdev.bus, &vqpci->vq, qs->alloc); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qtest_shutdown(qs); |
| } |
| |
| static void pci_indirect(void) |
| { |
| QVirtioPCIDevice *dev; |
| QVirtQueuePCI *vqpci; |
| QOSState *qs; |
| QVirtioBlkReq req; |
| QVRingIndirectDesc *indirect; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| qs = pci_test_start(); |
| |
| dev = virtio_blk_pci_init(qs->pcibus, PCI_SLOT); |
| |
| capacity = qvirtio_config_readq(&dev->vdev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(&dev->vdev); |
| g_assert_cmphex(features & (1u << VIRTIO_RING_F_INDIRECT_DESC), !=, 0); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_EVENT_IDX) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(&dev->vdev, features); |
| |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, qs->alloc, 0); |
| qvirtio_set_driver_ok(&dev->vdev); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(qs->alloc, &dev->vdev, &req, 512); |
| |
| g_free(req.data); |
| |
| indirect = qvring_indirect_desc_setup(&dev->vdev, qs->alloc, 2); |
| qvring_indirect_desc_add(indirect, req_addr, 528, false); |
| qvring_indirect_desc_add(indirect, req_addr + 528, 1, true); |
| free_head = qvirtqueue_add_indirect(&vqpci->vq, indirect); |
| qvirtqueue_kick(&dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| g_free(indirect); |
| guest_free(qs->alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(qs->alloc, &dev->vdev, &req, 512); |
| |
| g_free(req.data); |
| |
| indirect = qvring_indirect_desc_setup(&dev->vdev, qs->alloc, 2); |
| qvring_indirect_desc_add(indirect, req_addr, 16, false); |
| qvring_indirect_desc_add(indirect, req_addr + 16, 513, true); |
| free_head = qvirtqueue_add_indirect(&vqpci->vq, indirect); |
| qvirtqueue_kick(&dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| g_free(indirect); |
| guest_free(qs->alloc, req_addr); |
| |
| /* End test */ |
| qvirtqueue_cleanup(dev->vdev.bus, &vqpci->vq, qs->alloc); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qtest_shutdown(qs); |
| } |
| |
| static void pci_config(void) |
| { |
| QVirtioPCIDevice *dev; |
| QOSState *qs; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| uint64_t capacity; |
| |
| qs = pci_test_start(); |
| |
| dev = virtio_blk_pci_init(qs->pcibus, PCI_SLOT); |
| |
| capacity = qvirtio_config_readq(&dev->vdev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| qvirtio_set_driver_ok(&dev->vdev); |
| |
| qmp("{ 'execute': 'block_resize', 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| qvirtio_wait_config_isr(&dev->vdev, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(&dev->vdev, 0); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| |
| qtest_shutdown(qs); |
| } |
| |
| static void pci_msix(void) |
| { |
| QVirtioPCIDevice *dev; |
| QOSState *qs; |
| QVirtQueuePCI *vqpci; |
| QVirtioBlkReq req; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| qs = pci_test_start(); |
| |
| dev = virtio_blk_pci_init(qs->pcibus, PCI_SLOT); |
| qpci_msix_enable(dev->pdev); |
| |
| qvirtio_pci_set_msix_configuration_vector(dev, qs->alloc, 0); |
| |
| capacity = qvirtio_config_readq(&dev->vdev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(&dev->vdev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_INDIRECT_DESC) | |
| (1u << VIRTIO_RING_F_EVENT_IDX) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(&dev->vdev, features); |
| |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, qs->alloc, 0); |
| qvirtqueue_pci_msix_setup(dev, vqpci, qs->alloc, 1); |
| |
| qvirtio_set_driver_ok(&dev->vdev); |
| |
| qmp("{ 'execute': 'block_resize', 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| |
| qvirtio_wait_config_isr(&dev->vdev, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(&dev->vdev, 0); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(qs->alloc, &dev->vdev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(&dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(qs->alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(qs->alloc, &dev->vdev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(&dev->vdev, &vqpci->vq, free_head); |
| |
| |
| qvirtio_wait_queue_isr(&dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(qs->alloc, req_addr); |
| |
| /* End test */ |
| qvirtqueue_cleanup(dev->vdev.bus, &vqpci->vq, qs->alloc); |
| qpci_msix_disable(dev->pdev); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qtest_shutdown(qs); |
| } |
| |
| static void pci_idx(void) |
| { |
| QVirtioPCIDevice *dev; |
| QOSState *qs; |
| QVirtQueuePCI *vqpci; |
| QVirtioBlkReq req; |
| uint64_t req_addr; |
| uint64_t capacity; |
| uint32_t features; |
| uint32_t free_head; |
| uint8_t status; |
| char *data; |
| |
| qs = pci_test_start(); |
| |
| dev = virtio_blk_pci_init(qs->pcibus, PCI_SLOT); |
| qpci_msix_enable(dev->pdev); |
| |
| qvirtio_pci_set_msix_configuration_vector(dev, qs->alloc, 0); |
| |
| capacity = qvirtio_config_readq(&dev->vdev, 0); |
| g_assert_cmpint(capacity, ==, TEST_IMAGE_SIZE / 512); |
| |
| features = qvirtio_get_features(&dev->vdev); |
| features = features & ~(QVIRTIO_F_BAD_FEATURE | |
| (1u << VIRTIO_RING_F_INDIRECT_DESC) | |
| (1u << VIRTIO_F_NOTIFY_ON_EMPTY) | |
| (1u << VIRTIO_BLK_F_SCSI)); |
| qvirtio_set_features(&dev->vdev, features); |
| |
| vqpci = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, qs->alloc, 0); |
| qvirtqueue_pci_msix_setup(dev, vqpci, qs->alloc, 1); |
| |
| qvirtio_set_driver_ok(&dev->vdev); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 0; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(qs->alloc, &dev->vdev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(&dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&dev->vdev, &vqpci->vq, QVIRTIO_BLK_TIMEOUT_US); |
| |
| /* Write request */ |
| req.type = VIRTIO_BLK_T_OUT; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| strcpy(req.data, "TEST"); |
| |
| req_addr = virtio_blk_request(qs->alloc, &dev->vdev, &req, 512); |
| |
| g_free(req.data); |
| |
| /* Notify after processing the third request */ |
| qvirtqueue_set_used_event(&vqpci->vq, 2); |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| qvirtqueue_kick(&dev->vdev, &vqpci->vq, free_head); |
| |
| /* No notification expected */ |
| status = qvirtio_wait_status_byte_no_isr(&dev->vdev, |
| &vqpci->vq, req_addr + 528, |
| QVIRTIO_BLK_TIMEOUT_US); |
| g_assert_cmpint(status, ==, 0); |
| |
| guest_free(qs->alloc, req_addr); |
| |
| /* Read request */ |
| req.type = VIRTIO_BLK_T_IN; |
| req.ioprio = 1; |
| req.sector = 1; |
| req.data = g_malloc0(512); |
| |
| req_addr = virtio_blk_request(qs->alloc, &dev->vdev, &req, 512); |
| |
| g_free(req.data); |
| |
| free_head = qvirtqueue_add(&vqpci->vq, req_addr, 16, false, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 16, 512, true, true); |
| qvirtqueue_add(&vqpci->vq, req_addr + 528, 1, true, false); |
| |
| qvirtqueue_kick(&dev->vdev, &vqpci->vq, free_head); |
| |
| qvirtio_wait_queue_isr(&dev->vdev, &vqpci->vq, |
| QVIRTIO_BLK_TIMEOUT_US); |
| |
| status = readb(req_addr + 528); |
| g_assert_cmpint(status, ==, 0); |
| |
| data = g_malloc0(512); |
| memread(req_addr + 16, data, 512); |
| g_assert_cmpstr(data, ==, "TEST"); |
| g_free(data); |
| |
| guest_free(qs->alloc, req_addr); |
| |
| /* End test */ |
| qvirtqueue_cleanup(dev->vdev.bus, &vqpci->vq, qs->alloc); |
| qpci_msix_disable(dev->pdev); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| qtest_shutdown(qs); |
| } |
| |
| static void pci_hotplug(void) |
| { |
| QVirtioPCIDevice *dev; |
| QOSState *qs; |
| const char *arch = qtest_get_arch(); |
| |
| qs = pci_test_start(); |
| |
| /* plug secondary disk */ |
| qpci_plug_device_test("virtio-blk-pci", "drv1", PCI_SLOT_HP, |
| "'drive': 'drive1'"); |
| |
| dev = virtio_blk_pci_init(qs->pcibus, PCI_SLOT_HP); |
| g_assert(dev); |
| qvirtio_pci_device_disable(dev); |
| g_free(dev); |
| |
| /* unplug secondary disk */ |
| if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { |
| qpci_unplug_acpi_device_test("drv1", PCI_SLOT_HP); |
| } |
| qtest_shutdown(qs); |
| } |
| |
| static void mmio_basic(void) |
| { |
| QVirtioMMIODevice *dev; |
| QVirtQueue *vq; |
| QGuestAllocator *alloc; |
| int n_size = TEST_IMAGE_SIZE / 2; |
| uint64_t capacity; |
| |
| arm_test_start(); |
| |
| dev = qvirtio_mmio_init_device(MMIO_DEV_BASE_ADDR, MMIO_PAGE_SIZE); |
| g_assert(dev != NULL); |
| g_assert_cmphex(dev->vdev.device_type, ==, VIRTIO_ID_BLOCK); |
| |
| qvirtio_reset(&dev->vdev); |
| qvirtio_set_acknowledge(&dev->vdev); |
| qvirtio_set_driver(&dev->vdev); |
| |
| alloc = generic_alloc_init(MMIO_RAM_ADDR, MMIO_RAM_SIZE, MMIO_PAGE_SIZE); |
| vq = qvirtqueue_setup(&dev->vdev, alloc, 0); |
| |
| test_basic(&dev->vdev, alloc, vq); |
| |
| qmp("{ 'execute': 'block_resize', 'arguments': { 'device': 'drive0', " |
| " 'size': %d } }", n_size); |
| |
| qvirtio_wait_queue_isr(&dev->vdev, vq, QVIRTIO_BLK_TIMEOUT_US); |
| |
| capacity = qvirtio_config_readq(&dev->vdev, 0); |
| g_assert_cmpint(capacity, ==, n_size / 512); |
| |
| /* End test */ |
| qvirtqueue_cleanup(dev->vdev.bus, vq, alloc); |
| g_free(dev); |
| generic_alloc_uninit(alloc); |
| test_end(); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| const char *arch = qtest_get_arch(); |
| |
| g_test_init(&argc, &argv, NULL); |
| |
| if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0 || |
| strcmp(arch, "ppc64") == 0) { |
| qtest_add_func("/virtio/blk/pci/basic", pci_basic); |
| qtest_add_func("/virtio/blk/pci/indirect", pci_indirect); |
| qtest_add_func("/virtio/blk/pci/config", pci_config); |
| if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { |
| qtest_add_func("/virtio/blk/pci/msix", pci_msix); |
| qtest_add_func("/virtio/blk/pci/idx", pci_idx); |
| } |
| qtest_add_func("/virtio/blk/pci/hotplug", pci_hotplug); |
| } else if (strcmp(arch, "arm") == 0) { |
| qtest_add_func("/virtio/blk/mmio/basic", mmio_basic); |
| } |
| |
| return g_test_run(); |
| } |