| /* |
| * ASPEED SoC 2600 family |
| * |
| * Copyright (c) 2016-2019, IBM Corporation. |
| * |
| * This code is licensed under the GPL version 2 or later. See |
| * the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "cpu.h" |
| #include "exec/address-spaces.h" |
| #include "hw/misc/unimp.h" |
| #include "hw/arm/aspeed_soc.h" |
| #include "hw/char/serial.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/error-report.h" |
| #include "hw/i2c/aspeed_i2c.h" |
| #include "net/net.h" |
| #include "sysemu/sysemu.h" |
| |
| #define ASPEED_SOC_IOMEM_SIZE 0x00200000 |
| |
| static const hwaddr aspeed_soc_ast2600_memmap[] = { |
| [ASPEED_SRAM] = 0x10000000, |
| /* 0x16000000 0x17FFFFFF : AHB BUS do LPC Bus bridge */ |
| [ASPEED_IOMEM] = 0x1E600000, |
| [ASPEED_PWM] = 0x1E610000, |
| [ASPEED_FMC] = 0x1E620000, |
| [ASPEED_SPI1] = 0x1E630000, |
| [ASPEED_SPI2] = 0x1E641000, |
| [ASPEED_EHCI1] = 0x1E6A1000, |
| [ASPEED_EHCI2] = 0x1E6A3000, |
| [ASPEED_MII1] = 0x1E650000, |
| [ASPEED_MII2] = 0x1E650008, |
| [ASPEED_MII3] = 0x1E650010, |
| [ASPEED_MII4] = 0x1E650018, |
| [ASPEED_ETH1] = 0x1E660000, |
| [ASPEED_ETH3] = 0x1E670000, |
| [ASPEED_ETH2] = 0x1E680000, |
| [ASPEED_ETH4] = 0x1E690000, |
| [ASPEED_VIC] = 0x1E6C0000, |
| [ASPEED_SDMC] = 0x1E6E0000, |
| [ASPEED_SCU] = 0x1E6E2000, |
| [ASPEED_XDMA] = 0x1E6E7000, |
| [ASPEED_ADC] = 0x1E6E9000, |
| [ASPEED_VIDEO] = 0x1E700000, |
| [ASPEED_SDHCI] = 0x1E740000, |
| [ASPEED_EMMC] = 0x1E750000, |
| [ASPEED_GPIO] = 0x1E780000, |
| [ASPEED_GPIO_1_8V] = 0x1E780800, |
| [ASPEED_RTC] = 0x1E781000, |
| [ASPEED_TIMER1] = 0x1E782000, |
| [ASPEED_WDT] = 0x1E785000, |
| [ASPEED_LPC] = 0x1E789000, |
| [ASPEED_IBT] = 0x1E789140, |
| [ASPEED_I2C] = 0x1E78A000, |
| [ASPEED_UART1] = 0x1E783000, |
| [ASPEED_UART5] = 0x1E784000, |
| [ASPEED_VUART] = 0x1E787000, |
| [ASPEED_SDRAM] = 0x80000000, |
| }; |
| |
| #define ASPEED_A7MPCORE_ADDR 0x40460000 |
| |
| #define ASPEED_SOC_AST2600_MAX_IRQ 128 |
| |
| /* Shared Peripheral Interrupt values below are offset by -32 from datasheet */ |
| static const int aspeed_soc_ast2600_irqmap[] = { |
| [ASPEED_UART1] = 47, |
| [ASPEED_UART2] = 48, |
| [ASPEED_UART3] = 49, |
| [ASPEED_UART4] = 50, |
| [ASPEED_UART5] = 8, |
| [ASPEED_VUART] = 8, |
| [ASPEED_FMC] = 39, |
| [ASPEED_SDMC] = 0, |
| [ASPEED_SCU] = 12, |
| [ASPEED_ADC] = 78, |
| [ASPEED_XDMA] = 6, |
| [ASPEED_SDHCI] = 43, |
| [ASPEED_EHCI1] = 5, |
| [ASPEED_EHCI2] = 9, |
| [ASPEED_EMMC] = 15, |
| [ASPEED_GPIO] = 40, |
| [ASPEED_GPIO_1_8V] = 11, |
| [ASPEED_RTC] = 13, |
| [ASPEED_TIMER1] = 16, |
| [ASPEED_TIMER2] = 17, |
| [ASPEED_TIMER3] = 18, |
| [ASPEED_TIMER4] = 19, |
| [ASPEED_TIMER5] = 20, |
| [ASPEED_TIMER6] = 21, |
| [ASPEED_TIMER7] = 22, |
| [ASPEED_TIMER8] = 23, |
| [ASPEED_WDT] = 24, |
| [ASPEED_PWM] = 44, |
| [ASPEED_LPC] = 35, |
| [ASPEED_IBT] = 35, /* LPC */ |
| [ASPEED_I2C] = 110, /* 110 -> 125 */ |
| [ASPEED_ETH1] = 2, |
| [ASPEED_ETH2] = 3, |
| [ASPEED_ETH3] = 32, |
| [ASPEED_ETH4] = 33, |
| |
| }; |
| |
| static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) |
| { |
| AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); |
| |
| return qdev_get_gpio_in(DEVICE(&s->a7mpcore), sc->irqmap[ctrl]); |
| } |
| |
| static void aspeed_soc_ast2600_init(Object *obj) |
| { |
| AspeedSoCState *s = ASPEED_SOC(obj); |
| AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); |
| int i; |
| char socname[8]; |
| char typename[64]; |
| |
| if (sscanf(sc->name, "%7s", socname) != 1) { |
| g_assert_not_reached(); |
| } |
| |
| for (i = 0; i < sc->num_cpus; i++) { |
| object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]), |
| sizeof(s->cpu[i]), sc->cpu_type, |
| &error_abort, NULL); |
| } |
| |
| snprintf(typename, sizeof(typename), "aspeed.scu-%s", socname); |
| sysbus_init_child_obj(obj, "scu", OBJECT(&s->scu), sizeof(s->scu), |
| typename); |
| qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev", |
| sc->silicon_rev); |
| object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu), |
| "hw-strap1", &error_abort); |
| object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu), |
| "hw-strap2", &error_abort); |
| object_property_add_alias(obj, "hw-prot-key", OBJECT(&s->scu), |
| "hw-prot-key", &error_abort); |
| |
| sysbus_init_child_obj(obj, "a7mpcore", &s->a7mpcore, |
| sizeof(s->a7mpcore), TYPE_A15MPCORE_PRIV); |
| |
| sysbus_init_child_obj(obj, "rtc", OBJECT(&s->rtc), sizeof(s->rtc), |
| TYPE_ASPEED_RTC); |
| |
| snprintf(typename, sizeof(typename), "aspeed.timer-%s", socname); |
| sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl), |
| sizeof(s->timerctrl), typename); |
| |
| snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname); |
| sysbus_init_child_obj(obj, "i2c", OBJECT(&s->i2c), sizeof(s->i2c), |
| typename); |
| |
| snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname); |
| sysbus_init_child_obj(obj, "fmc", OBJECT(&s->fmc), sizeof(s->fmc), |
| typename); |
| object_property_add_alias(obj, "num-cs", OBJECT(&s->fmc), "num-cs", |
| &error_abort); |
| |
| for (i = 0; i < sc->spis_num; i++) { |
| snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname); |
| sysbus_init_child_obj(obj, "spi[*]", OBJECT(&s->spi[i]), |
| sizeof(s->spi[i]), typename); |
| } |
| |
| for (i = 0; i < sc->ehcis_num; i++) { |
| sysbus_init_child_obj(obj, "ehci[*]", OBJECT(&s->ehci[i]), |
| sizeof(s->ehci[i]), TYPE_PLATFORM_EHCI); |
| } |
| |
| snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname); |
| sysbus_init_child_obj(obj, "sdmc", OBJECT(&s->sdmc), sizeof(s->sdmc), |
| typename); |
| object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc), |
| "ram-size", &error_abort); |
| object_property_add_alias(obj, "max-ram-size", OBJECT(&s->sdmc), |
| "max-ram-size", &error_abort); |
| |
| for (i = 0; i < sc->wdts_num; i++) { |
| snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname); |
| sysbus_init_child_obj(obj, "wdt[*]", OBJECT(&s->wdt[i]), |
| sizeof(s->wdt[i]), typename); |
| } |
| |
| for (i = 0; i < sc->macs_num; i++) { |
| sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), |
| sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); |
| |
| sysbus_init_child_obj(obj, "mii[*]", &s->mii[i], sizeof(s->mii[i]), |
| TYPE_ASPEED_MII); |
| } |
| |
| sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), |
| TYPE_ASPEED_XDMA); |
| |
| snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname); |
| sysbus_init_child_obj(obj, "gpio", OBJECT(&s->gpio), sizeof(s->gpio), |
| typename); |
| |
| snprintf(typename, sizeof(typename), "aspeed.gpio-%s-1_8v", socname); |
| sysbus_init_child_obj(obj, "gpio_1_8v", OBJECT(&s->gpio_1_8v), |
| sizeof(s->gpio_1_8v), typename); |
| |
| sysbus_init_child_obj(obj, "sd-controller", OBJECT(&s->sdhci), |
| sizeof(s->sdhci), TYPE_ASPEED_SDHCI); |
| |
| object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); |
| |
| /* Init sd card slot class here so that they're under the correct parent */ |
| for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { |
| sysbus_init_child_obj(obj, "sd-controller.sdhci[*]", |
| OBJECT(&s->sdhci.slots[i]), |
| sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI); |
| } |
| |
| sysbus_init_child_obj(obj, "emmc-controller", OBJECT(&s->emmc), |
| sizeof(s->emmc), TYPE_ASPEED_SDHCI); |
| |
| object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort); |
| |
| sysbus_init_child_obj(obj, "emmc-controller.sdhci", |
| OBJECT(&s->emmc.slots[0]), sizeof(s->emmc.slots[0]), |
| TYPE_SYSBUS_SDHCI); |
| } |
| |
| /* |
| * ASPEED ast2600 has 0xf as cluster ID |
| * |
| * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0388e/CIHEBGFG.html |
| */ |
| static uint64_t aspeed_calc_affinity(int cpu) |
| { |
| return (0xf << ARM_AFF1_SHIFT) | cpu; |
| } |
| |
| static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) |
| { |
| int i; |
| AspeedSoCState *s = ASPEED_SOC(dev); |
| AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); |
| Error *err = NULL, *local_err = NULL; |
| qemu_irq irq; |
| |
| /* IO space */ |
| create_unimplemented_device("aspeed_soc.io", sc->memmap[ASPEED_IOMEM], |
| ASPEED_SOC_IOMEM_SIZE); |
| |
| /* Video engine stub */ |
| create_unimplemented_device("aspeed.video", sc->memmap[ASPEED_VIDEO], |
| 0x1000); |
| |
| if (s->num_cpus > sc->num_cpus) { |
| warn_report("%s: invalid number of CPUs %d, using default %d", |
| sc->name, s->num_cpus, sc->num_cpus); |
| s->num_cpus = sc->num_cpus; |
| } |
| |
| /* CPU */ |
| for (i = 0; i < s->num_cpus; i++) { |
| object_property_set_int(OBJECT(&s->cpu[i]), QEMU_PSCI_CONDUIT_SMC, |
| "psci-conduit", &error_abort); |
| if (s->num_cpus > 1) { |
| object_property_set_int(OBJECT(&s->cpu[i]), |
| ASPEED_A7MPCORE_ADDR, |
| "reset-cbar", &error_abort); |
| } |
| object_property_set_int(OBJECT(&s->cpu[i]), aspeed_calc_affinity(i), |
| "mp-affinity", &error_abort); |
| |
| object_property_set_int(OBJECT(&s->cpu[i]), 1125000000, "cntfrq", |
| &error_abort); |
| |
| /* |
| * TODO: the secondary CPUs are started and a boot helper |
| * is needed when using -kernel |
| */ |
| |
| object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| } |
| |
| /* A7MPCORE */ |
| object_property_set_int(OBJECT(&s->a7mpcore), s->num_cpus, "num-cpu", |
| &error_abort); |
| object_property_set_int(OBJECT(&s->a7mpcore), |
| ASPEED_SOC_AST2600_MAX_IRQ + GIC_INTERNAL, |
| "num-irq", &error_abort); |
| |
| object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized", |
| &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, ASPEED_A7MPCORE_ADDR); |
| |
| for (i = 0; i < s->num_cpus; i++) { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore); |
| DeviceState *d = DEVICE(qemu_get_cpu(i)); |
| |
| irq = qdev_get_gpio_in(d, ARM_CPU_IRQ); |
| sysbus_connect_irq(sbd, i, irq); |
| irq = qdev_get_gpio_in(d, ARM_CPU_FIQ); |
| sysbus_connect_irq(sbd, i + s->num_cpus, irq); |
| irq = qdev_get_gpio_in(d, ARM_CPU_VIRQ); |
| sysbus_connect_irq(sbd, i + 2 * s->num_cpus, irq); |
| irq = qdev_get_gpio_in(d, ARM_CPU_VFIQ); |
| sysbus_connect_irq(sbd, i + 3 * s->num_cpus, irq); |
| } |
| |
| /* SRAM */ |
| memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram", |
| sc->sram_size, &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| memory_region_add_subregion(get_system_memory(), |
| sc->memmap[ASPEED_SRAM], &s->sram); |
| |
| /* SCU */ |
| object_property_set_bool(OBJECT(&s->scu), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_SCU]); |
| |
| /* RTC */ |
| object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->memmap[ASPEED_RTC]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, |
| aspeed_soc_get_irq(s, ASPEED_RTC)); |
| |
| /* Timer */ |
| object_property_set_link(OBJECT(&s->timerctrl), |
| OBJECT(&s->scu), "scu", &error_abort); |
| object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, |
| sc->memmap[ASPEED_TIMER1]); |
| for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { |
| qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq); |
| } |
| |
| /* UART - attach an 8250 to the IO space as our UART5 */ |
| if (serial_hd(0)) { |
| qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5); |
| serial_mm_init(get_system_memory(), sc->memmap[ASPEED_UART5], 2, |
| uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); |
| } |
| |
| /* I2C */ |
| object_property_set_link(OBJECT(&s->i2c), OBJECT(s->dram_mr), "dram", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->memmap[ASPEED_I2C]); |
| for (i = 0; i < ASPEED_I2C_GET_CLASS(&s->i2c)->num_busses; i++) { |
| qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| sc->irqmap[ASPEED_I2C] + i); |
| /* |
| * The AST2600 SoC has one IRQ per I2C bus. Skip the common |
| * IRQ (AST2400 and AST2500) and connect all bussses. |
| */ |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), i + 1, irq); |
| } |
| |
| /* FMC, The number of CS is set at the board level */ |
| object_property_set_link(OBJECT(&s->fmc), OBJECT(s->dram_mr), "dram", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| object_property_set_int(OBJECT(&s->fmc), sc->memmap[ASPEED_SDRAM], |
| "sdram-base", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->memmap[ASPEED_FMC]); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1, |
| s->fmc.ctrl->flash_window_base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, |
| aspeed_soc_get_irq(s, ASPEED_FMC)); |
| |
| /* SPI */ |
| for (i = 0; i < sc->spis_num; i++) { |
| object_property_set_int(OBJECT(&s->spi[i]), 1, "num-cs", &err); |
| object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", |
| &local_err); |
| error_propagate(&err, local_err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, |
| sc->memmap[ASPEED_SPI1 + i]); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1, |
| s->spi[i].ctrl->flash_window_base); |
| } |
| |
| /* EHCI */ |
| for (i = 0; i < sc->ehcis_num; i++) { |
| object_property_set_bool(OBJECT(&s->ehci[i]), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci[i]), 0, |
| sc->memmap[ASPEED_EHCI1 + i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0, |
| aspeed_soc_get_irq(s, ASPEED_EHCI1 + i)); |
| } |
| |
| /* SDMC - SDRAM Memory Controller */ |
| object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->memmap[ASPEED_SDMC]); |
| |
| /* Watch dog */ |
| for (i = 0; i < sc->wdts_num; i++) { |
| AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]); |
| |
| object_property_set_link(OBJECT(&s->wdt[i]), |
| OBJECT(&s->scu), "scu", &error_abort); |
| object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, |
| sc->memmap[ASPEED_WDT] + i * awc->offset); |
| } |
| |
| /* Net */ |
| for (i = 0; i < nb_nics && i < sc->macs_num; i++) { |
| qdev_set_nic_properties(DEVICE(&s->ftgmac100[i]), &nd_table[i]); |
| object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "aspeed", |
| &err); |
| object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "realized", |
| &local_err); |
| error_propagate(&err, local_err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, |
| sc->memmap[ASPEED_ETH1 + i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, |
| aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); |
| |
| object_property_set_link(OBJECT(&s->mii[i]), OBJECT(&s->ftgmac100[i]), |
| "nic", &error_abort); |
| object_property_set_bool(OBJECT(&s->mii[i]), true, "realized", |
| &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->mii[i]), 0, |
| sc->memmap[ASPEED_MII1 + i]); |
| } |
| |
| /* XDMA */ |
| object_property_set_bool(OBJECT(&s->xdma), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->xdma), 0, |
| sc->memmap[ASPEED_XDMA]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0, |
| aspeed_soc_get_irq(s, ASPEED_XDMA)); |
| |
| /* GPIO */ |
| object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, sc->memmap[ASPEED_GPIO]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0, |
| aspeed_soc_get_irq(s, ASPEED_GPIO)); |
| |
| object_property_set_bool(OBJECT(&s->gpio_1_8v), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio_1_8v), 0, |
| sc->memmap[ASPEED_GPIO_1_8V]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio_1_8v), 0, |
| aspeed_soc_get_irq(s, ASPEED_GPIO_1_8V)); |
| |
| /* SDHCI */ |
| object_property_set_bool(OBJECT(&s->sdhci), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdhci), 0, |
| sc->memmap[ASPEED_SDHCI]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, |
| aspeed_soc_get_irq(s, ASPEED_SDHCI)); |
| |
| /* eMMC */ |
| object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0, |
| aspeed_soc_get_irq(s, ASPEED_EMMC)); |
| } |
| |
| static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc); |
| |
| dc->realize = aspeed_soc_ast2600_realize; |
| |
| sc->name = "ast2600-a0"; |
| sc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); |
| sc->silicon_rev = AST2600_A0_SILICON_REV; |
| sc->sram_size = 0x10000; |
| sc->spis_num = 2; |
| sc->ehcis_num = 2; |
| sc->wdts_num = 4; |
| sc->macs_num = 4; |
| sc->irqmap = aspeed_soc_ast2600_irqmap; |
| sc->memmap = aspeed_soc_ast2600_memmap; |
| sc->num_cpus = 2; |
| } |
| |
| static const TypeInfo aspeed_soc_ast2600_type_info = { |
| .name = "ast2600-a0", |
| .parent = TYPE_ASPEED_SOC, |
| .instance_size = sizeof(AspeedSoCState), |
| .instance_init = aspeed_soc_ast2600_init, |
| .class_init = aspeed_soc_ast2600_class_init, |
| .class_size = sizeof(AspeedSoCClass), |
| }; |
| |
| static void aspeed_soc_register_types(void) |
| { |
| type_register_static(&aspeed_soc_ast2600_type_info); |
| }; |
| |
| type_init(aspeed_soc_register_types) |
