| /* |
| * Bluetooth serial HCI transport. |
| * CSR41814 HCI with H4p vendor extensions. |
| * |
| * Copyright (C) 2008 Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include "qemu-common.h" |
| #include "qemu-char.h" |
| #include "qemu-timer.h" |
| #include "irq.h" |
| #include "sysemu.h" |
| #include "net.h" |
| #include "bt.h" |
| |
| struct csrhci_s { |
| int enable; |
| qemu_irq *pins; |
| int pin_state; |
| int modem_state; |
| CharDriverState chr; |
| #define FIFO_LEN 4096 |
| int out_start; |
| int out_len; |
| int out_size; |
| uint8_t outfifo[FIFO_LEN * 2]; |
| uint8_t inpkt[FIFO_LEN]; |
| int in_len; |
| int in_hdr; |
| int in_data; |
| QEMUTimer *out_tm; |
| int64_t baud_delay; |
| |
| bdaddr_t bd_addr; |
| struct HCIInfo *hci; |
| }; |
| |
| /* H4+ packet types */ |
| enum { |
| H4_CMD_PKT = 1, |
| H4_ACL_PKT = 2, |
| H4_SCO_PKT = 3, |
| H4_EVT_PKT = 4, |
| H4_NEG_PKT = 6, |
| H4_ALIVE_PKT = 7, |
| }; |
| |
| /* CSR41814 negotiation start magic packet */ |
| static const uint8_t csrhci_neg_packet[] = { |
| H4_NEG_PKT, 10, |
| 0x00, 0xa0, 0x01, 0x00, 0x00, |
| 0x4c, 0x00, 0x96, 0x00, 0x00, |
| }; |
| |
| /* CSR41814 vendor-specific command OCFs */ |
| enum { |
| OCF_CSR_SEND_FIRMWARE = 0x000, |
| }; |
| |
| static inline void csrhci_fifo_wake(struct csrhci_s *s) |
| { |
| if (!s->enable || !s->out_len) |
| return; |
| |
| /* XXX: Should wait for s->modem_state & CHR_TIOCM_RTS? */ |
| if (s->chr.chr_can_read && s->chr.chr_can_read(s->chr.handler_opaque) && |
| s->chr.chr_read) { |
| s->chr.chr_read(s->chr.handler_opaque, |
| s->outfifo + s->out_start ++, 1); |
| s->out_len --; |
| if (s->out_start >= s->out_size) { |
| s->out_start = 0; |
| s->out_size = FIFO_LEN; |
| } |
| } |
| |
| if (s->out_len) |
| qemu_mod_timer(s->out_tm, qemu_get_clock(vm_clock) + s->baud_delay); |
| } |
| |
| #define csrhci_out_packetz(s, len) memset(csrhci_out_packet(s, len), 0, len) |
| static uint8_t *csrhci_out_packet(struct csrhci_s *s, int len) |
| { |
| int off = s->out_start + s->out_len; |
| |
| /* TODO: do the padding here, i.e. align len */ |
| s->out_len += len; |
| |
| if (off < FIFO_LEN) { |
| if (off + len > FIFO_LEN && (s->out_size = off + len) > FIFO_LEN * 2) { |
| fprintf(stderr, "%s: can't alloc %i bytes\n", __FUNCTION__, len); |
| exit(-1); |
| } |
| return s->outfifo + off; |
| } |
| |
| if (s->out_len > s->out_size) { |
| fprintf(stderr, "%s: can't alloc %i bytes\n", __FUNCTION__, len); |
| exit(-1); |
| } |
| |
| return s->outfifo + off - s->out_size; |
| } |
| |
| static inline uint8_t *csrhci_out_packet_csr(struct csrhci_s *s, |
| int type, int len) |
| { |
| uint8_t *ret = csrhci_out_packetz(s, len + 2); |
| |
| *ret ++ = type; |
| *ret ++ = len; |
| |
| return ret; |
| } |
| |
| static inline uint8_t *csrhci_out_packet_event(struct csrhci_s *s, |
| int evt, int len) |
| { |
| uint8_t *ret = csrhci_out_packetz(s, |
| len + 1 + sizeof(struct hci_event_hdr)); |
| |
| *ret ++ = H4_EVT_PKT; |
| ((struct hci_event_hdr *) ret)->evt = evt; |
| ((struct hci_event_hdr *) ret)->plen = len; |
| |
| return ret + sizeof(struct hci_event_hdr); |
| } |
| |
| static void csrhci_in_packet_vendor(struct csrhci_s *s, int ocf, |
| uint8_t *data, int len) |
| { |
| int offset; |
| uint8_t *rpkt; |
| |
| switch (ocf) { |
| case OCF_CSR_SEND_FIRMWARE: |
| /* Check if this is the bd_address packet */ |
| if (len >= 18 + 8 && data[12] == 0x01 && data[13] == 0x00) { |
| offset = 18; |
| s->bd_addr.b[0] = data[offset + 7]; /* Beyond cmd packet end(!?) */ |
| s->bd_addr.b[1] = data[offset + 6]; |
| s->bd_addr.b[2] = data[offset + 4]; |
| s->bd_addr.b[3] = data[offset + 0]; |
| s->bd_addr.b[4] = data[offset + 3]; |
| s->bd_addr.b[5] = data[offset + 2]; |
| |
| s->hci->bdaddr_set(s->hci, s->bd_addr.b); |
| fprintf(stderr, "%s: bd_address loaded from firmware: " |
| "%02x:%02x:%02x:%02x:%02x:%02x\n", __FUNCTION__, |
| s->bd_addr.b[0], s->bd_addr.b[1], s->bd_addr.b[2], |
| s->bd_addr.b[3], s->bd_addr.b[4], s->bd_addr.b[5]); |
| } |
| |
| rpkt = csrhci_out_packet_event(s, EVT_VENDOR, 11); |
| /* Status bytes: no error */ |
| rpkt[9] = 0x00; |
| rpkt[10] = 0x00; |
| break; |
| |
| default: |
| fprintf(stderr, "%s: got a bad CMD packet\n", __FUNCTION__); |
| return; |
| } |
| |
| csrhci_fifo_wake(s); |
| } |
| |
| static void csrhci_in_packet(struct csrhci_s *s, uint8_t *pkt) |
| { |
| uint8_t *rpkt; |
| int opc; |
| |
| switch (*pkt ++) { |
| case H4_CMD_PKT: |
| opc = le16_to_cpu(((struct hci_command_hdr *) pkt)->opcode); |
| if (cmd_opcode_ogf(opc) == OGF_VENDOR_CMD) { |
| csrhci_in_packet_vendor(s, cmd_opcode_ocf(opc), |
| pkt + sizeof(struct hci_command_hdr), |
| s->in_len - sizeof(struct hci_command_hdr) - 1); |
| return; |
| } |
| |
| /* TODO: if the command is OCF_READ_LOCAL_COMMANDS or the likes, |
| * we need to send it to the HCI layer and then add our supported |
| * commands to the returned mask (such as OGF_VENDOR_CMD). With |
| * bt-hci.c we could just have hooks for this kind of commands but |
| * we can't with bt-host.c. */ |
| |
| s->hci->cmd_send(s->hci, pkt, s->in_len - 1); |
| break; |
| |
| case H4_EVT_PKT: |
| goto bad_pkt; |
| |
| case H4_ACL_PKT: |
| s->hci->acl_send(s->hci, pkt, s->in_len - 1); |
| break; |
| |
| case H4_SCO_PKT: |
| s->hci->sco_send(s->hci, pkt, s->in_len - 1); |
| break; |
| |
| case H4_NEG_PKT: |
| if (s->in_hdr != sizeof(csrhci_neg_packet) || |
| memcmp(pkt - 1, csrhci_neg_packet, s->in_hdr)) { |
| fprintf(stderr, "%s: got a bad NEG packet\n", __FUNCTION__); |
| return; |
| } |
| pkt += 2; |
| |
| rpkt = csrhci_out_packet_csr(s, H4_NEG_PKT, 10); |
| |
| *rpkt ++ = 0x20; /* Operational settings negotation Ok */ |
| memcpy(rpkt, pkt, 7); rpkt += 7; |
| *rpkt ++ = 0xff; |
| *rpkt ++ = 0xff; |
| break; |
| |
| case H4_ALIVE_PKT: |
| if (s->in_hdr != 4 || pkt[1] != 0x55 || pkt[2] != 0x00) { |
| fprintf(stderr, "%s: got a bad ALIVE packet\n", __FUNCTION__); |
| return; |
| } |
| |
| rpkt = csrhci_out_packet_csr(s, H4_ALIVE_PKT, 2); |
| |
| *rpkt ++ = 0xcc; |
| *rpkt ++ = 0x00; |
| break; |
| |
| default: |
| bad_pkt: |
| /* TODO: error out */ |
| fprintf(stderr, "%s: got a bad packet\n", __FUNCTION__); |
| break; |
| } |
| |
| csrhci_fifo_wake(s); |
| } |
| |
| static int csrhci_header_len(const uint8_t *pkt) |
| { |
| switch (pkt[0]) { |
| case H4_CMD_PKT: |
| return HCI_COMMAND_HDR_SIZE; |
| case H4_EVT_PKT: |
| return HCI_EVENT_HDR_SIZE; |
| case H4_ACL_PKT: |
| return HCI_ACL_HDR_SIZE; |
| case H4_SCO_PKT: |
| return HCI_SCO_HDR_SIZE; |
| case H4_NEG_PKT: |
| return pkt[1] + 1; |
| case H4_ALIVE_PKT: |
| return 3; |
| } |
| |
| exit(-1); |
| } |
| |
| static int csrhci_data_len(const uint8_t *pkt) |
| { |
| switch (*pkt ++) { |
| case H4_CMD_PKT: |
| /* It seems that vendor-specific command packets for H4+ are all |
| * one byte longer than indicated in the standard header. */ |
| if (le16_to_cpu(((struct hci_command_hdr *) pkt)->opcode) == 0xfc00) |
| return (((struct hci_command_hdr *) pkt)->plen + 1) & ~1; |
| |
| return ((struct hci_command_hdr *) pkt)->plen; |
| case H4_EVT_PKT: |
| return ((struct hci_event_hdr *) pkt)->plen; |
| case H4_ACL_PKT: |
| return le16_to_cpu(((struct hci_acl_hdr *) pkt)->dlen); |
| case H4_SCO_PKT: |
| return ((struct hci_sco_hdr *) pkt)->dlen; |
| case H4_NEG_PKT: |
| case H4_ALIVE_PKT: |
| return 0; |
| } |
| |
| exit(-1); |
| } |
| |
| static int csrhci_write(struct CharDriverState *chr, |
| const uint8_t *buf, int len) |
| { |
| struct csrhci_s *s = (struct csrhci_s *) chr->opaque; |
| int plen = s->in_len; |
| |
| if (!s->enable) |
| return 0; |
| |
| s->in_len += len; |
| memcpy(s->inpkt + plen, buf, len); |
| |
| while (1) { |
| if (s->in_len >= 2 && plen < 2) |
| s->in_hdr = csrhci_header_len(s->inpkt) + 1; |
| |
| if (s->in_len >= s->in_hdr && plen < s->in_hdr) |
| s->in_data = csrhci_data_len(s->inpkt) + s->in_hdr; |
| |
| if (s->in_len >= s->in_data) { |
| csrhci_in_packet(s, s->inpkt); |
| |
| memmove(s->inpkt, s->inpkt + s->in_len, s->in_len - s->in_data); |
| s->in_len -= s->in_data; |
| s->in_hdr = INT_MAX; |
| s->in_data = INT_MAX; |
| plen = 0; |
| } else |
| break; |
| } |
| |
| return len; |
| } |
| |
| static void csrhci_out_hci_packet_event(void *opaque, |
| const uint8_t *data, int len) |
| { |
| struct csrhci_s *s = (struct csrhci_s *) opaque; |
| uint8_t *pkt = csrhci_out_packet(s, (len + 2) & ~1); /* Align */ |
| |
| *pkt ++ = H4_EVT_PKT; |
| memcpy(pkt, data, len); |
| |
| csrhci_fifo_wake(s); |
| } |
| |
| static void csrhci_out_hci_packet_acl(void *opaque, |
| const uint8_t *data, int len) |
| { |
| struct csrhci_s *s = (struct csrhci_s *) opaque; |
| uint8_t *pkt = csrhci_out_packet(s, (len + 2) & ~1); /* Align */ |
| |
| *pkt ++ = H4_ACL_PKT; |
| pkt[len & ~1] = 0; |
| memcpy(pkt, data, len); |
| |
| csrhci_fifo_wake(s); |
| } |
| |
| static int csrhci_ioctl(struct CharDriverState *chr, int cmd, void *arg) |
| { |
| QEMUSerialSetParams *ssp; |
| struct csrhci_s *s = (struct csrhci_s *) chr->opaque; |
| int prev_state = s->modem_state; |
| |
| switch (cmd) { |
| case CHR_IOCTL_SERIAL_SET_PARAMS: |
| ssp = (QEMUSerialSetParams *) arg; |
| s->baud_delay = ticks_per_sec / ssp->speed; |
| /* Moments later... (but shorter than 100ms) */ |
| s->modem_state |= CHR_TIOCM_CTS; |
| break; |
| |
| case CHR_IOCTL_SERIAL_GET_TIOCM: |
| *(int *) arg = s->modem_state; |
| break; |
| |
| case CHR_IOCTL_SERIAL_SET_TIOCM: |
| s->modem_state = *(int *) arg; |
| if (~s->modem_state & prev_state & CHR_TIOCM_RTS) |
| s->modem_state &= ~CHR_TIOCM_CTS; |
| break; |
| |
| default: |
| return -ENOTSUP; |
| } |
| return 0; |
| } |
| |
| static void csrhci_reset(struct csrhci_s *s) |
| { |
| s->out_len = 0; |
| s->out_size = FIFO_LEN; |
| s->in_len = 0; |
| s->baud_delay = ticks_per_sec; |
| s->enable = 0; |
| s->in_hdr = INT_MAX; |
| s->in_data = INT_MAX; |
| |
| s->modem_state = 0; |
| /* After a while... (but sooner than 10ms) */ |
| s->modem_state |= CHR_TIOCM_CTS; |
| |
| memset(&s->bd_addr, 0, sizeof(bdaddr_t)); |
| } |
| |
| static void csrhci_out_tick(void *opaque) |
| { |
| csrhci_fifo_wake((struct csrhci_s *) opaque); |
| } |
| |
| static void csrhci_pins(void *opaque, int line, int level) |
| { |
| struct csrhci_s *s = (struct csrhci_s *) opaque; |
| int state = s->pin_state; |
| |
| s->pin_state &= ~(1 << line); |
| s->pin_state |= (!!level) << line; |
| |
| if ((state & ~s->pin_state) & (1 << csrhci_pin_reset)) { |
| /* TODO: Disappear from lower layers */ |
| csrhci_reset(s); |
| } |
| |
| if (s->pin_state == 3 && state != 3) { |
| s->enable = 1; |
| /* TODO: Wake lower layers up */ |
| } |
| } |
| |
| qemu_irq *csrhci_pins_get(CharDriverState *chr) |
| { |
| struct csrhci_s *s = (struct csrhci_s *) chr->opaque; |
| |
| return s->pins; |
| } |
| |
| CharDriverState *uart_hci_init(qemu_irq wakeup) |
| { |
| struct csrhci_s *s = (struct csrhci_s *) |
| qemu_mallocz(sizeof(struct csrhci_s)); |
| |
| s->chr.opaque = s; |
| s->chr.chr_write = csrhci_write; |
| s->chr.chr_ioctl = csrhci_ioctl; |
| |
| s->hci = qemu_next_hci(); |
| s->hci->opaque = s; |
| s->hci->evt_recv = csrhci_out_hci_packet_event; |
| s->hci->acl_recv = csrhci_out_hci_packet_acl; |
| |
| s->out_tm = qemu_new_timer(vm_clock, csrhci_out_tick, s); |
| s->pins = qemu_allocate_irqs(csrhci_pins, s, __csrhci_pins); |
| csrhci_reset(s); |
| |
| return &s->chr; |
| } |