| /* |
| * ARM generic helpers. |
| * |
| * This code is licensed under the GNU GPL v2 or later. |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "trace.h" |
| #include "cpu.h" |
| #include "internals.h" |
| #include "exec/helper-proto.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/timer.h" |
| #include "qemu/bitops.h" |
| #include "qemu/crc32c.h" |
| #include "qemu/qemu-print.h" |
| #include "exec/exec-all.h" |
| #include <zlib.h> /* For crc32 */ |
| #include "hw/irq.h" |
| #include "sysemu/cpu-timers.h" |
| #include "sysemu/kvm.h" |
| #include "qapi/qapi-commands-machine-target.h" |
| #include "qapi/error.h" |
| #include "qemu/guest-random.h" |
| #ifdef CONFIG_TCG |
| #include "semihosting/common-semi.h" |
| #endif |
| #include "cpregs.h" |
| |
| #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */ |
| |
| static void switch_mode(CPUARMState *env, int mode); |
| |
| static uint64_t raw_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| assert(ri->fieldoffset); |
| if (cpreg_field_is_64bit(ri)) { |
| return CPREG_FIELD64(env, ri); |
| } else { |
| return CPREG_FIELD32(env, ri); |
| } |
| } |
| |
| void raw_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| assert(ri->fieldoffset); |
| if (cpreg_field_is_64bit(ri)) { |
| CPREG_FIELD64(env, ri) = value; |
| } else { |
| CPREG_FIELD32(env, ri) = value; |
| } |
| } |
| |
| static void *raw_ptr(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return (char *)env + ri->fieldoffset; |
| } |
| |
| uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Raw read of a coprocessor register (as needed for migration, etc). */ |
| if (ri->type & ARM_CP_CONST) { |
| return ri->resetvalue; |
| } else if (ri->raw_readfn) { |
| return ri->raw_readfn(env, ri); |
| } else if (ri->readfn) { |
| return ri->readfn(env, ri); |
| } else { |
| return raw_read(env, ri); |
| } |
| } |
| |
| static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t v) |
| { |
| /* |
| * Raw write of a coprocessor register (as needed for migration, etc). |
| * Note that constant registers are treated as write-ignored; the |
| * caller should check for success by whether a readback gives the |
| * value written. |
| */ |
| if (ri->type & ARM_CP_CONST) { |
| return; |
| } else if (ri->raw_writefn) { |
| ri->raw_writefn(env, ri, v); |
| } else if (ri->writefn) { |
| ri->writefn(env, ri, v); |
| } else { |
| raw_write(env, ri, v); |
| } |
| } |
| |
| static bool raw_accessors_invalid(const ARMCPRegInfo *ri) |
| { |
| /* |
| * Return true if the regdef would cause an assertion if you called |
| * read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a |
| * program bug for it not to have the NO_RAW flag). |
| * NB that returning false here doesn't necessarily mean that calling |
| * read/write_raw_cp_reg() is safe, because we can't distinguish "has |
| * read/write access functions which are safe for raw use" from "has |
| * read/write access functions which have side effects but has forgotten |
| * to provide raw access functions". |
| * The tests here line up with the conditions in read/write_raw_cp_reg() |
| * and assertions in raw_read()/raw_write(). |
| */ |
| if ((ri->type & ARM_CP_CONST) || |
| ri->fieldoffset || |
| ((ri->raw_writefn || ri->writefn) && (ri->raw_readfn || ri->readfn))) { |
| return false; |
| } |
| return true; |
| } |
| |
| bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync) |
| { |
| /* Write the coprocessor state from cpu->env to the (index,value) list. */ |
| int i; |
| bool ok = true; |
| |
| for (i = 0; i < cpu->cpreg_array_len; i++) { |
| uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]); |
| const ARMCPRegInfo *ri; |
| uint64_t newval; |
| |
| ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); |
| if (!ri) { |
| ok = false; |
| continue; |
| } |
| if (ri->type & ARM_CP_NO_RAW) { |
| continue; |
| } |
| |
| newval = read_raw_cp_reg(&cpu->env, ri); |
| if (kvm_sync) { |
| /* |
| * Only sync if the previous list->cpustate sync succeeded. |
| * Rather than tracking the success/failure state for every |
| * item in the list, we just recheck "does the raw write we must |
| * have made in write_list_to_cpustate() read back OK" here. |
| */ |
| uint64_t oldval = cpu->cpreg_values[i]; |
| |
| if (oldval == newval) { |
| continue; |
| } |
| |
| write_raw_cp_reg(&cpu->env, ri, oldval); |
| if (read_raw_cp_reg(&cpu->env, ri) != oldval) { |
| continue; |
| } |
| |
| write_raw_cp_reg(&cpu->env, ri, newval); |
| } |
| cpu->cpreg_values[i] = newval; |
| } |
| return ok; |
| } |
| |
| bool write_list_to_cpustate(ARMCPU *cpu) |
| { |
| int i; |
| bool ok = true; |
| |
| for (i = 0; i < cpu->cpreg_array_len; i++) { |
| uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]); |
| uint64_t v = cpu->cpreg_values[i]; |
| const ARMCPRegInfo *ri; |
| |
| ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); |
| if (!ri) { |
| ok = false; |
| continue; |
| } |
| if (ri->type & ARM_CP_NO_RAW) { |
| continue; |
| } |
| /* |
| * Write value and confirm it reads back as written |
| * (to catch read-only registers and partially read-only |
| * registers where the incoming migration value doesn't match) |
| */ |
| write_raw_cp_reg(&cpu->env, ri, v); |
| if (read_raw_cp_reg(&cpu->env, ri) != v) { |
| ok = false; |
| } |
| } |
| return ok; |
| } |
| |
| static void add_cpreg_to_list(gpointer key, gpointer opaque) |
| { |
| ARMCPU *cpu = opaque; |
| uint32_t regidx = (uintptr_t)key; |
| const ARMCPRegInfo *ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); |
| |
| if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { |
| cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx); |
| /* The value array need not be initialized at this point */ |
| cpu->cpreg_array_len++; |
| } |
| } |
| |
| static void count_cpreg(gpointer key, gpointer opaque) |
| { |
| ARMCPU *cpu = opaque; |
| const ARMCPRegInfo *ri; |
| |
| ri = g_hash_table_lookup(cpu->cp_regs, key); |
| |
| if (!(ri->type & (ARM_CP_NO_RAW | ARM_CP_ALIAS))) { |
| cpu->cpreg_array_len++; |
| } |
| } |
| |
| static gint cpreg_key_compare(gconstpointer a, gconstpointer b) |
| { |
| uint64_t aidx = cpreg_to_kvm_id((uintptr_t)a); |
| uint64_t bidx = cpreg_to_kvm_id((uintptr_t)b); |
| |
| if (aidx > bidx) { |
| return 1; |
| } |
| if (aidx < bidx) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| void init_cpreg_list(ARMCPU *cpu) |
| { |
| /* |
| * Initialise the cpreg_tuples[] array based on the cp_regs hash. |
| * Note that we require cpreg_tuples[] to be sorted by key ID. |
| */ |
| GList *keys; |
| int arraylen; |
| |
| keys = g_hash_table_get_keys(cpu->cp_regs); |
| keys = g_list_sort(keys, cpreg_key_compare); |
| |
| cpu->cpreg_array_len = 0; |
| |
| g_list_foreach(keys, count_cpreg, cpu); |
| |
| arraylen = cpu->cpreg_array_len; |
| cpu->cpreg_indexes = g_new(uint64_t, arraylen); |
| cpu->cpreg_values = g_new(uint64_t, arraylen); |
| cpu->cpreg_vmstate_indexes = g_new(uint64_t, arraylen); |
| cpu->cpreg_vmstate_values = g_new(uint64_t, arraylen); |
| cpu->cpreg_vmstate_array_len = cpu->cpreg_array_len; |
| cpu->cpreg_array_len = 0; |
| |
| g_list_foreach(keys, add_cpreg_to_list, cpu); |
| |
| assert(cpu->cpreg_array_len == arraylen); |
| |
| g_list_free(keys); |
| } |
| |
| /* |
| * Some registers are not accessible from AArch32 EL3 if SCR.NS == 0. |
| */ |
| static CPAccessResult access_el3_aa32ns(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (!is_a64(env) && arm_current_el(env) == 3 && |
| arm_is_secure_below_el3(env)) { |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* |
| * Some secure-only AArch32 registers trap to EL3 if used from |
| * Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts). |
| * Note that an access from Secure EL1 can only happen if EL3 is AArch64. |
| * We assume that the .access field is set to PL1_RW. |
| */ |
| static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 3) { |
| return CP_ACCESS_OK; |
| } |
| if (arm_is_secure_below_el3(env)) { |
| if (env->cp15.scr_el3 & SCR_EEL2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_TRAP_EL3; |
| } |
| /* This will be EL1 NS and EL2 NS, which just UNDEF */ |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| /* |
| * Check for traps to performance monitor registers, which are controlled |
| * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3. |
| */ |
| static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| |
| if (el < 2 && (mdcr_el2 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ |
| static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1) { |
| uint64_t trap = isread ? HCR_TRVM : HCR_TVM; |
| if (arm_hcr_el2_eff(env) & trap) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TSW. */ |
| static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TSW)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TACR. */ |
| static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TACR)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TTLB. */ |
| static CPAccessResult access_ttlb(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TTLB)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TTLB or TTLBIS. */ |
| static CPAccessResult access_ttlbis(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && |
| (arm_hcr_el2_eff(env) & (HCR_TTLB | HCR_TTLBIS))) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| #ifdef TARGET_AARCH64 |
| /* Check for traps from EL1 due to HCR_EL2.TTLB or TTLBOS. */ |
| static CPAccessResult access_ttlbos(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && |
| (arm_hcr_el2_eff(env) & (HCR_TTLB | HCR_TTLBOS))) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| #endif |
| |
| static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| raw_write(env, ri, value); |
| tlb_flush(CPU(cpu)); /* Flush TLB as domain not tracked in TLB */ |
| } |
| |
| static void fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (raw_read(env, ri) != value) { |
| /* |
| * Unlike real hardware the qemu TLB uses virtual addresses, |
| * not modified virtual addresses, so this causes a TLB flush. |
| */ |
| tlb_flush(CPU(cpu)); |
| raw_write(env, ri, value); |
| } |
| } |
| |
| static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) |
| && !extended_addresses_enabled(env)) { |
| /* |
| * For VMSA (when not using the LPAE long descriptor page table |
| * format) this register includes the ASID, so do a TLB flush. |
| * For PMSA it is purely a process ID and no action is needed. |
| */ |
| tlb_flush(CPU(cpu)); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| static int alle1_tlbmask(CPUARMState *env) |
| { |
| /* |
| * Note that the 'ALL' scope must invalidate both stage 1 and |
| * stage 2 translations, whereas most other scopes only invalidate |
| * stage 1 translations. |
| */ |
| return (ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E10_0 | |
| ARMMMUIdxBit_Stage2 | |
| ARMMMUIdxBit_Stage2_S); |
| } |
| |
| |
| /* IS variants of TLB operations must affect all cores */ |
| static void tlbiall_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_all_cpus_synced(cs); |
| } |
| |
| static void tlbiasid_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_all_cpus_synced(cs); |
| } |
| |
| static void tlbimva_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_page_all_cpus_synced(cs, value & TARGET_PAGE_MASK); |
| } |
| |
| static void tlbimvaa_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_page_all_cpus_synced(cs, value & TARGET_PAGE_MASK); |
| } |
| |
| /* |
| * Non-IS variants of TLB operations are upgraded to |
| * IS versions if we are at EL1 and HCR_EL2.FB is effectively set to |
| * force broadcast of these operations. |
| */ |
| static bool tlb_force_broadcast(CPUARMState *env) |
| { |
| return arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_FB); |
| } |
| |
| static void tlbiall_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate all (TLBIALL) */ |
| CPUState *cs = env_cpu(env); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_all_cpus_synced(cs); |
| } else { |
| tlb_flush(cs); |
| } |
| } |
| |
| static void tlbimva_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate single TLB entry by MVA and ASID (TLBIMVA) */ |
| CPUState *cs = env_cpu(env); |
| |
| value &= TARGET_PAGE_MASK; |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_page_all_cpus_synced(cs, value); |
| } else { |
| tlb_flush_page(cs, value); |
| } |
| } |
| |
| static void tlbiasid_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate by ASID (TLBIASID) */ |
| CPUState *cs = env_cpu(env); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_all_cpus_synced(cs); |
| } else { |
| tlb_flush(cs); |
| } |
| } |
| |
| static void tlbimvaa_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate single entry by MVA, all ASIDs (TLBIMVAA) */ |
| CPUState *cs = env_cpu(env); |
| |
| value &= TARGET_PAGE_MASK; |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_page_all_cpus_synced(cs, value); |
| } else { |
| tlb_flush_page(cs, value); |
| } |
| } |
| |
| static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx(cs, alle1_tlbmask(env)); |
| } |
| |
| static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, alle1_tlbmask(env)); |
| } |
| |
| |
| static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); |
| |
| tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); |
| |
| tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, |
| ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbiipas2_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = (value & MAKE_64BIT_MASK(0, 28)) << 12; |
| |
| tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_Stage2); |
| } |
| |
| static void tlbiipas2is_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = (value & MAKE_64BIT_MASK(0, 28)) << 12; |
| |
| tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, ARMMMUIdxBit_Stage2); |
| } |
| |
| static const ARMCPRegInfo cp_reginfo[] = { |
| /* |
| * Define the secure and non-secure FCSE identifier CP registers |
| * separately because there is no secure bank in V8 (no _EL3). This allows |
| * the secure register to be properly reset and migrated. There is also no |
| * v8 EL1 version of the register so the non-secure instance stands alone. |
| */ |
| { .name = "FCSEIDR", |
| .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .secure = ARM_CP_SECSTATE_NS, |
| .fieldoffset = offsetof(CPUARMState, cp15.fcseidr_ns), |
| .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, }, |
| { .name = "FCSEIDR_S", |
| .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, |
| .fieldoffset = offsetof(CPUARMState, cp15.fcseidr_s), |
| .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, }, |
| /* |
| * Define the secure and non-secure context identifier CP registers |
| * separately because there is no secure bank in V8 (no _EL3). This allows |
| * the secure register to be properly reset and migrated. In the |
| * non-secure case, the 32-bit register will have reset and migration |
| * disabled during registration as it is handled by the 64-bit instance. |
| */ |
| { .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_CONTEXTIDR_EL1, |
| .secure = ARM_CP_SECSTATE_NS, |
| .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]), |
| .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, |
| { .name = "CONTEXTIDR_S", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .secure = ARM_CP_SECSTATE_S, |
| .fieldoffset = offsetof(CPUARMState, cp15.contextidr_s), |
| .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, |
| }; |
| |
| static const ARMCPRegInfo not_v8_cp_reginfo[] = { |
| /* |
| * NB: Some of these registers exist in v8 but with more precise |
| * definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]). |
| */ |
| /* MMU Domain access control / MPU write buffer control */ |
| { .name = "DACR", |
| .cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .writefn = dacr_write, .raw_writefn = raw_write, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), |
| offsetoflow32(CPUARMState, cp15.dacr_ns) } }, |
| /* |
| * ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. |
| * For v6 and v5, these mappings are overly broad. |
| */ |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 1, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 4, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 8, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| /* Cache maintenance ops; some of this space may be overridden later. */ |
| { .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY, |
| .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W, |
| .type = ARM_CP_NOP | ARM_CP_OVERRIDE }, |
| }; |
| |
| static const ARMCPRegInfo not_v6_cp_reginfo[] = { |
| /* |
| * Not all pre-v6 cores implemented this WFI, so this is slightly |
| * over-broad. |
| */ |
| { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2, |
| .access = PL1_W, .type = ARM_CP_WFI }, |
| }; |
| |
| static const ARMCPRegInfo not_v7_cp_reginfo[] = { |
| /* |
| * Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which |
| * is UNPREDICTABLE; we choose to NOP as most implementations do). |
| */ |
| { .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_W, .type = ARM_CP_WFI }, |
| /* |
| * L1 cache lockdown. Not architectural in v6 and earlier but in practice |
| * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and |
| * OMAPCP will override this space. |
| */ |
| { .name = "DLOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_data), |
| .resetvalue = 0 }, |
| { .name = "ILOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_insn), |
| .resetvalue = 0 }, |
| /* v6 doesn't have the cache ID registers but Linux reads them anyway */ |
| { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = 0 }, |
| /* |
| * We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; |
| * implementing it as RAZ means the "debug architecture version" bits |
| * will read as a reserved value, which should cause Linux to not try |
| * to use the debug hardware. |
| */ |
| { .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* |
| * MMU TLB control. Note that the wildcarding means we cover not just |
| * the unified TLB ops but also the dside/iside/inner-shareable variants. |
| */ |
| { .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 0, .access = PL1_W, .writefn = tlbiall_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "TLBIMVA", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 1, .access = PL1_W, .writefn = tlbimva_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "TLBIASID", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 2, .access = PL1_W, .writefn = tlbiasid_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "TLBIMVAA", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "PRRR", .cp = 15, .crn = 10, .crm = 2, |
| .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "NMRR", .cp = 15, .crn = 10, .crm = 2, |
| .opc1 = 0, .opc2 = 1, .access = PL1_RW, .type = ARM_CP_NOP }, |
| }; |
| |
| static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint32_t mask = 0; |
| |
| /* In ARMv8 most bits of CPACR_EL1 are RES0. */ |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| /* |
| * ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. |
| * ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP. |
| * TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell. |
| */ |
| if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env))) { |
| /* VFP coprocessor: cp10 & cp11 [23:20] */ |
| mask |= R_CPACR_ASEDIS_MASK | |
| R_CPACR_D32DIS_MASK | |
| R_CPACR_CP11_MASK | |
| R_CPACR_CP10_MASK; |
| |
| if (!arm_feature(env, ARM_FEATURE_NEON)) { |
| /* ASEDIS [31] bit is RAO/WI */ |
| value |= R_CPACR_ASEDIS_MASK; |
| } |
| |
| /* |
| * VFPv3 and upwards with NEON implement 32 double precision |
| * registers (D0-D31). |
| */ |
| if (!cpu_isar_feature(aa32_simd_r32, env_archcpu(env))) { |
| /* D32DIS [30] is RAO/WI if D16-31 are not implemented. */ |
| value |= R_CPACR_D32DIS_MASK; |
| } |
| } |
| value &= mask; |
| } |
| |
| /* |
| * For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10 |
| * is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| mask = R_CPACR_CP11_MASK | R_CPACR_CP10_MASK; |
| value = (value & ~mask) | (env->cp15.cpacr_el1 & mask); |
| } |
| |
| env->cp15.cpacr_el1 = value; |
| } |
| |
| static uint64_t cpacr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* |
| * For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10 |
| * is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00. |
| */ |
| uint64_t value = env->cp15.cpacr_el1; |
| |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| value = ~(R_CPACR_CP11_MASK | R_CPACR_CP10_MASK); |
| } |
| return value; |
| } |
| |
| |
| static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* |
| * Call cpacr_write() so that we reset with the correct RAO bits set |
| * for our CPU features. |
| */ |
| cpacr_write(env, ri, 0); |
| } |
| |
| static CPAccessResult cpacr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* Check if CPACR accesses are to be trapped to EL2 */ |
| if (arm_current_el(env) == 1 && arm_is_el2_enabled(env) && |
| FIELD_EX64(env->cp15.cptr_el[2], CPTR_EL2, TCPAC)) { |
| return CP_ACCESS_TRAP_EL2; |
| /* Check if CPACR accesses are to be trapped to EL3 */ |
| } else if (arm_current_el(env) < 3 && |
| FIELD_EX64(env->cp15.cptr_el[3], CPTR_EL3, TCPAC)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult cptr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* Check if CPTR accesses are set to trap to EL3 */ |
| if (arm_current_el(env) == 2 && |
| FIELD_EX64(env->cp15.cptr_el[3], CPTR_EL3, TCPAC)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo v6_cp_reginfo[] = { |
| /* prefetch by MVA in v6, NOP in v7 */ |
| { .name = "MVA_prefetch", |
| .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| /* |
| * We need to break the TB after ISB to execute self-modifying code |
| * correctly and also to take any pending interrupts immediately. |
| * So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag. |
| */ |
| { .name = "ISB", .cp = 15, .crn = 7, .crm = 5, .opc1 = 0, .opc2 = 4, |
| .access = PL0_W, .type = ARM_CP_NO_RAW, .writefn = arm_cp_write_ignore }, |
| { .name = "DSB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 4, |
| .access = PL0_W, .type = ARM_CP_NOP }, |
| { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5, |
| .access = PL0_W, .type = ARM_CP_NOP }, |
| { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), |
| offsetof(CPUARMState, cp15.ifar_ns) }, |
| .resetvalue = 0, }, |
| /* |
| * Watchpoint Fault Address Register : should actually only be present |
| * for 1136, 1176, 11MPCore. |
| */ |
| { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, }, |
| { .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, |
| .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access, |
| .fgt = FGT_CPACR_EL1, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1), |
| .resetfn = cpacr_reset, .writefn = cpacr_write, .readfn = cpacr_read }, |
| }; |
| |
| typedef struct pm_event { |
| uint16_t number; /* PMEVTYPER.evtCount is 16 bits wide */ |
| /* If the event is supported on this CPU (used to generate PMCEID[01]) */ |
| bool (*supported)(CPUARMState *); |
| /* |
| * Retrieve the current count of the underlying event. The programmed |
| * counters hold a difference from the return value from this function |
| */ |
| uint64_t (*get_count)(CPUARMState *); |
| /* |
| * Return how many nanoseconds it will take (at a minimum) for count events |
| * to occur. A negative value indicates the counter will never overflow, or |
| * that the counter has otherwise arranged for the overflow bit to be set |
| * and the PMU interrupt to be raised on overflow. |
| */ |
| int64_t (*ns_per_count)(uint64_t); |
| } pm_event; |
| |
| static bool event_always_supported(CPUARMState *env) |
| { |
| return true; |
| } |
| |
| static uint64_t swinc_get_count(CPUARMState *env) |
| { |
| /* |
| * SW_INCR events are written directly to the pmevcntr's by writes to |
| * PMSWINC, so there is no underlying count maintained by the PMU itself |
| */ |
| return 0; |
| } |
| |
| static int64_t swinc_ns_per(uint64_t ignored) |
| { |
| return -1; |
| } |
| |
| /* |
| * Return the underlying cycle count for the PMU cycle counters. If we're in |
| * usermode, simply return 0. |
| */ |
| static uint64_t cycles_get_count(CPUARMState *env) |
| { |
| #ifndef CONFIG_USER_ONLY |
| return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), |
| ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); |
| #else |
| return cpu_get_host_ticks(); |
| #endif |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static int64_t cycles_ns_per(uint64_t cycles) |
| { |
| return (ARM_CPU_FREQ / NANOSECONDS_PER_SECOND) * cycles; |
| } |
| |
| static bool instructions_supported(CPUARMState *env) |
| { |
| return icount_enabled() == 1; /* Precise instruction counting */ |
| } |
| |
| static uint64_t instructions_get_count(CPUARMState *env) |
| { |
| return (uint64_t)icount_get_raw(); |
| } |
| |
| static int64_t instructions_ns_per(uint64_t icount) |
| { |
| return icount_to_ns((int64_t)icount); |
| } |
| #endif |
| |
| static bool pmuv3p1_events_supported(CPUARMState *env) |
| { |
| /* For events which are supported in any v8.1 PMU */ |
| return cpu_isar_feature(any_pmuv3p1, env_archcpu(env)); |
| } |
| |
| static bool pmuv3p4_events_supported(CPUARMState *env) |
| { |
| /* For events which are supported in any v8.1 PMU */ |
| return cpu_isar_feature(any_pmuv3p4, env_archcpu(env)); |
| } |
| |
| static uint64_t zero_event_get_count(CPUARMState *env) |
| { |
| /* For events which on QEMU never fire, so their count is always zero */ |
| return 0; |
| } |
| |
| static int64_t zero_event_ns_per(uint64_t cycles) |
| { |
| /* An event which never fires can never overflow */ |
| return -1; |
| } |
| |
| static const pm_event pm_events[] = { |
| { .number = 0x000, /* SW_INCR */ |
| .supported = event_always_supported, |
| .get_count = swinc_get_count, |
| .ns_per_count = swinc_ns_per, |
| }, |
| #ifndef CONFIG_USER_ONLY |
| { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */ |
| .supported = instructions_supported, |
| .get_count = instructions_get_count, |
| .ns_per_count = instructions_ns_per, |
| }, |
| { .number = 0x011, /* CPU_CYCLES, Cycle */ |
| .supported = event_always_supported, |
| .get_count = cycles_get_count, |
| .ns_per_count = cycles_ns_per, |
| }, |
| #endif |
| { .number = 0x023, /* STALL_FRONTEND */ |
| .supported = pmuv3p1_events_supported, |
| .get_count = zero_event_get_count, |
| .ns_per_count = zero_event_ns_per, |
| }, |
| { .number = 0x024, /* STALL_BACKEND */ |
| .supported = pmuv3p1_events_supported, |
| .get_count = zero_event_get_count, |
| .ns_per_count = zero_event_ns_per, |
| }, |
| { .number = 0x03c, /* STALL */ |
| .supported = pmuv3p4_events_supported, |
| .get_count = zero_event_get_count, |
| .ns_per_count = zero_event_ns_per, |
| }, |
| }; |
| |
| /* |
| * Note: Before increasing MAX_EVENT_ID beyond 0x3f into the 0x40xx range of |
| * events (i.e. the statistical profiling extension), this implementation |
| * should first be updated to something sparse instead of the current |
| * supported_event_map[] array. |
| */ |
| #define MAX_EVENT_ID 0x3c |
| #define UNSUPPORTED_EVENT UINT16_MAX |
| static uint16_t supported_event_map[MAX_EVENT_ID + 1]; |
| |
| /* |
| * Called upon CPU initialization to initialize PMCEID[01]_EL0 and build a map |
| * of ARM event numbers to indices in our pm_events array. |
| * |
| * Note: Events in the 0x40XX range are not currently supported. |
| */ |
| void pmu_init(ARMCPU *cpu) |
| { |
| unsigned int i; |
| |
| /* |
| * Empty supported_event_map and cpu->pmceid[01] before adding supported |
| * events to them |
| */ |
| for (i = 0; i < ARRAY_SIZE(supported_event_map); i++) { |
| supported_event_map[i] = UNSUPPORTED_EVENT; |
| } |
| cpu->pmceid0 = 0; |
| cpu->pmceid1 = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(pm_events); i++) { |
| const pm_event *cnt = &pm_events[i]; |
| assert(cnt->number <= MAX_EVENT_ID); |
| /* We do not currently support events in the 0x40xx range */ |
| assert(cnt->number <= 0x3f); |
| |
| if (cnt->supported(&cpu->env)) { |
| supported_event_map[cnt->number] = i; |
| uint64_t event_mask = 1ULL << (cnt->number & 0x1f); |
| if (cnt->number & 0x20) { |
| cpu->pmceid1 |= event_mask; |
| } else { |
| cpu->pmceid0 |= event_mask; |
| } |
| } |
| } |
| } |
| |
| /* |
| * Check at runtime whether a PMU event is supported for the current machine |
| */ |
| static bool event_supported(uint16_t number) |
| { |
| if (number > MAX_EVENT_ID) { |
| return false; |
| } |
| return supported_event_map[number] != UNSUPPORTED_EVENT; |
| } |
| |
| static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* |
| * Performance monitor registers user accessibility is controlled |
| * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable |
| * trapping to EL2 or EL3 for other accesses. |
| */ |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| |
| if (el == 0 && !(env->cp15.c9_pmuserenr & 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (el < 2 && (mdcr_el2 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult pmreg_access_xevcntr(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* ER: event counter read trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 3)) != 0 |
| && isread) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| static CPAccessResult pmreg_access_swinc(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* SW: software increment write trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 1)) != 0 |
| && !isread) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| static CPAccessResult pmreg_access_selr(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* ER: event counter read trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 3)) != 0) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| static CPAccessResult pmreg_access_ccntr(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* CR: cycle counter read trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 2)) != 0 |
| && isread) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| /* |
| * Bits in MDCR_EL2 and MDCR_EL3 which pmu_counter_enabled() looks at. |
| * We use these to decide whether we need to wrap a write to MDCR_EL2 |
| * or MDCR_EL3 in pmu_op_start()/pmu_op_finish() calls. |
| */ |
| #define MDCR_EL2_PMU_ENABLE_BITS \ |
| (MDCR_HPME | MDCR_HPMD | MDCR_HPMN | MDCR_HCCD | MDCR_HLP) |
| #define MDCR_EL3_PMU_ENABLE_BITS (MDCR_SPME | MDCR_SCCD) |
| |
| /* |
| * Returns true if the counter (pass 31 for PMCCNTR) should count events using |
| * the current EL, security state, and register configuration. |
| */ |
| static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) |
| { |
| uint64_t filter; |
| bool e, p, u, nsk, nsu, nsh, m; |
| bool enabled, prohibited = false, filtered; |
| bool secure = arm_is_secure(env); |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| uint8_t hpmn = mdcr_el2 & MDCR_HPMN; |
| |
| if (!arm_feature(env, ARM_FEATURE_PMU)) { |
| return false; |
| } |
| |
| if (!arm_feature(env, ARM_FEATURE_EL2) || |
| (counter < hpmn || counter == 31)) { |
| e = env->cp15.c9_pmcr & PMCRE; |
| } else { |
| e = mdcr_el2 & MDCR_HPME; |
| } |
| enabled = e && (env->cp15.c9_pmcnten & (1 << counter)); |
| |
| /* Is event counting prohibited? */ |
| if (el == 2 && (counter < hpmn || counter == 31)) { |
| prohibited = mdcr_el2 & MDCR_HPMD; |
| } |
| if (secure) { |
| prohibited = prohibited || !(env->cp15.mdcr_el3 & MDCR_SPME); |
| } |
| |
| if (counter == 31) { |
| /* |
| * The cycle counter defaults to running. PMCR.DP says "disable |
| * the cycle counter when event counting is prohibited". |
| * Some MDCR bits disable the cycle counter specifically. |
| */ |
| prohibited = prohibited && env->cp15.c9_pmcr & PMCRDP; |
| if (cpu_isar_feature(any_pmuv3p5, env_archcpu(env))) { |
| if (secure) { |
| prohibited = prohibited || (env->cp15.mdcr_el3 & MDCR_SCCD); |
| } |
| if (el == 2) { |
| prohibited = prohibited || (mdcr_el2 & MDCR_HCCD); |
| } |
| } |
| } |
| |
| if (counter == 31) { |
| filter = env->cp15.pmccfiltr_el0; |
| } else { |
| filter = env->cp15.c14_pmevtyper[counter]; |
| } |
| |
| p = filter & PMXEVTYPER_P; |
| u = filter & PMXEVTYPER_U; |
| nsk = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSK); |
| nsu = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSU); |
| nsh = arm_feature(env, ARM_FEATURE_EL2) && (filter & PMXEVTYPER_NSH); |
| m = arm_el_is_aa64(env, 1) && |
| arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_M); |
| |
| if (el == 0) { |
| filtered = secure ? u : u != nsu; |
| } else if (el == 1) { |
| filtered = secure ? p : p != nsk; |
| } else if (el == 2) { |
| filtered = !nsh; |
| } else { /* EL3 */ |
| filtered = m != p; |
| } |
| |
| if (counter != 31) { |
| /* |
| * If not checking PMCCNTR, ensure the counter is setup to an event we |
| * support |
| */ |
| uint16_t event = filter & PMXEVTYPER_EVTCOUNT; |
| if (!event_supported(event)) { |
| return false; |
| } |
| } |
| |
| return enabled && !prohibited && !filtered; |
| } |
| |
| static void pmu_update_irq(CPUARMState *env) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| qemu_set_irq(cpu->pmu_interrupt, (env->cp15.c9_pmcr & PMCRE) && |
| (env->cp15.c9_pminten & env->cp15.c9_pmovsr)); |
| } |
| |
| static bool pmccntr_clockdiv_enabled(CPUARMState *env) |
| { |
| /* |
| * Return true if the clock divider is enabled and the cycle counter |
| * is supposed to tick only once every 64 clock cycles. This is |
| * controlled by PMCR.D, but if PMCR.LC is set to enable the long |
| * (64-bit) cycle counter PMCR.D has no effect. |
| */ |
| return (env->cp15.c9_pmcr & (PMCRD | PMCRLC)) == PMCRD; |
| } |
| |
| static bool pmevcntr_is_64_bit(CPUARMState *env, int counter) |
| { |
| /* Return true if the specified event counter is configured to be 64 bit */ |
| |
| /* This isn't intended to be used with the cycle counter */ |
| assert(counter < 31); |
| |
| if (!cpu_isar_feature(any_pmuv3p5, env_archcpu(env))) { |
| return false; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_EL2)) { |
| /* |
| * MDCR_EL2.HLP still applies even when EL2 is disabled in the |
| * current security state, so we don't use arm_mdcr_el2_eff() here. |
| */ |
| bool hlp = env->cp15.mdcr_el2 & MDCR_HLP; |
| int hpmn = env->cp15.mdcr_el2 & MDCR_HPMN; |
| |
| if (hpmn != 0 && counter >= hpmn) { |
| return hlp; |
| } |
| } |
| return env->cp15.c9_pmcr & PMCRLP; |
| } |
| |
| /* |
| * Ensure c15_ccnt is the guest-visible count so that operations such as |
| * enabling/disabling the counter or filtering, modifying the count itself, |
| * etc. can be done logically. This is essentially a no-op if the counter is |
| * not enabled at the time of the call. |
| */ |
| static void pmccntr_op_start(CPUARMState *env) |
| { |
| uint64_t cycles = cycles_get_count(env); |
| |
| if (pmu_counter_enabled(env, 31)) { |
| uint64_t eff_cycles = cycles; |
| if (pmccntr_clockdiv_enabled(env)) { |
| eff_cycles /= 64; |
| } |
| |
| uint64_t new_pmccntr = eff_cycles - env->cp15.c15_ccnt_delta; |
| |
| uint64_t overflow_mask = env->cp15.c9_pmcr & PMCRLC ? \ |
| 1ull << 63 : 1ull << 31; |
| if (env->cp15.c15_ccnt & ~new_pmccntr & overflow_mask) { |
| env->cp15.c9_pmovsr |= (1ULL << 31); |
| pmu_update_irq(env); |
| } |
| |
| env->cp15.c15_ccnt = new_pmccntr; |
| } |
| env->cp15.c15_ccnt_delta = cycles; |
| } |
| |
| /* |
| * If PMCCNTR is enabled, recalculate the delta between the clock and the |
| * guest-visible count. A call to pmccntr_op_finish should follow every call to |
| * pmccntr_op_start. |
| */ |
| static void pmccntr_op_finish(CPUARMState *env) |
| { |
| if (pmu_counter_enabled(env, 31)) { |
| #ifndef CONFIG_USER_ONLY |
| /* Calculate when the counter will next overflow */ |
| uint64_t remaining_cycles = -env->cp15.c15_ccnt; |
| if (!(env->cp15.c9_pmcr & PMCRLC)) { |
| remaining_cycles = (uint32_t)remaining_cycles; |
| } |
| int64_t overflow_in = cycles_ns_per(remaining_cycles); |
| |
| if (overflow_in > 0) { |
| int64_t overflow_at; |
| |
| if (!sadd64_overflow(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), |
| overflow_in, &overflow_at)) { |
| ARMCPU *cpu = env_archcpu(env); |
| timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at); |
| } |
| } |
| #endif |
| |
| uint64_t prev_cycles = env->cp15.c15_ccnt_delta; |
| if (pmccntr_clockdiv_enabled(env)) { |
| prev_cycles /= 64; |
| } |
| env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt; |
| } |
| } |
| |
| static void pmevcntr_op_start(CPUARMState *env, uint8_t counter) |
| { |
| |
| uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT; |
| uint64_t count = 0; |
| if (event_supported(event)) { |
| uint16_t event_idx = supported_event_map[event]; |
| count = pm_events[event_idx].get_count(env); |
| } |
| |
| if (pmu_counter_enabled(env, counter)) { |
| uint64_t new_pmevcntr = count - env->cp15.c14_pmevcntr_delta[counter]; |
| uint64_t overflow_mask = pmevcntr_is_64_bit(env, counter) ? |
| 1ULL << 63 : 1ULL << 31; |
| |
| if (env->cp15.c14_pmevcntr[counter] & ~new_pmevcntr & overflow_mask) { |
| env->cp15.c9_pmovsr |= (1 << counter); |
| pmu_update_irq(env); |
| } |
| env->cp15.c14_pmevcntr[counter] = new_pmevcntr; |
| } |
| env->cp15.c14_pmevcntr_delta[counter] = count; |
| } |
| |
| static void pmevcntr_op_finish(CPUARMState *env, uint8_t counter) |
| { |
| if (pmu_counter_enabled(env, counter)) { |
| #ifndef CONFIG_USER_ONLY |
| uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT; |
| uint16_t event_idx = supported_event_map[event]; |
| uint64_t delta = -(env->cp15.c14_pmevcntr[counter] + 1); |
| int64_t overflow_in; |
| |
| if (!pmevcntr_is_64_bit(env, counter)) { |
| delta = (uint32_t)delta; |
| } |
| overflow_in = pm_events[event_idx].ns_per_count(delta); |
| |
| if (overflow_in > 0) { |
| int64_t overflow_at; |
| |
| if (!sadd64_overflow(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), |
| overflow_in, &overflow_at)) { |
| ARMCPU *cpu = env_archcpu(env); |
| timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at); |
| } |
| } |
| #endif |
| |
| env->cp15.c14_pmevcntr_delta[counter] -= |
| env->cp15.c14_pmevcntr[counter]; |
| } |
| } |
| |
| void pmu_op_start(CPUARMState *env) |
| { |
| unsigned int i; |
| pmccntr_op_start(env); |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| pmevcntr_op_start(env, i); |
| } |
| } |
| |
| void pmu_op_finish(CPUARMState *env) |
| { |
| unsigned int i; |
| pmccntr_op_finish(env); |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| pmevcntr_op_finish(env, i); |
| } |
| } |
| |
| void pmu_pre_el_change(ARMCPU *cpu, void *ignored) |
| { |
| pmu_op_start(&cpu->env); |
| } |
| |
| void pmu_post_el_change(ARMCPU *cpu, void *ignored) |
| { |
| pmu_op_finish(&cpu->env); |
| } |
| |
| void arm_pmu_timer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| /* |
| * Update all the counter values based on the current underlying counts, |
| * triggering interrupts to be raised, if necessary. pmu_op_finish() also |
| * has the effect of setting the cpu->pmu_timer to the next earliest time a |
| * counter may expire. |
| */ |
| pmu_op_start(&cpu->env); |
| pmu_op_finish(&cpu->env); |
| } |
| |
| static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmu_op_start(env); |
| |
| if (value & PMCRC) { |
| /* The counter has been reset */ |
| env->cp15.c15_ccnt = 0; |
| } |
| |
| if (value & PMCRP) { |
| unsigned int i; |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| env->cp15.c14_pmevcntr[i] = 0; |
| } |
| } |
| |
| env->cp15.c9_pmcr &= ~PMCR_WRITABLE_MASK; |
| env->cp15.c9_pmcr |= (value & PMCR_WRITABLE_MASK); |
| |
| pmu_op_finish(env); |
| } |
| |
| static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| unsigned int i; |
| uint64_t overflow_mask, new_pmswinc; |
| |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| /* Increment a counter's count iff: */ |
| if ((value & (1 << i)) && /* counter's bit is set */ |
| /* counter is enabled and not filtered */ |
| pmu_counter_enabled(env, i) && |
| /* counter is SW_INCR */ |
| (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) { |
| pmevcntr_op_start(env, i); |
| |
| /* |
| * Detect if this write causes an overflow since we can't predict |
| * PMSWINC overflows like we can for other events |
| */ |
| new_pmswinc = env->cp15.c14_pmevcntr[i] + 1; |
| |
| overflow_mask = pmevcntr_is_64_bit(env, i) ? |
| 1ULL << 63 : 1ULL << 31; |
| |
| if (env->cp15.c14_pmevcntr[i] & ~new_pmswinc & overflow_mask) { |
| env->cp15.c9_pmovsr |= (1 << i); |
| pmu_update_irq(env); |
| } |
| |
| env->cp15.c14_pmevcntr[i] = new_pmswinc; |
| |
| pmevcntr_op_finish(env, i); |
| } |
| } |
| } |
| |
| static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint64_t ret; |
| pmccntr_op_start(env); |
| ret = env->cp15.c15_ccnt; |
| pmccntr_op_finish(env); |
| return ret; |
| } |
| |
| static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * The value of PMSELR.SEL affects the behavior of PMXEVTYPER and |
| * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the |
| * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are |
| * accessed. |
| */ |
| env->cp15.c9_pmselr = value & 0x1f; |
| } |
| |
| static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmccntr_op_start(env); |
| env->cp15.c15_ccnt = value; |
| pmccntr_op_finish(env); |
| } |
| |
| static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint64_t cur_val = pmccntr_read(env, NULL); |
| |
| pmccntr_write(env, ri, deposit64(cur_val, 0, 32, value)); |
| } |
| |
| static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmccntr_op_start(env); |
| env->cp15.pmccfiltr_el0 = value & PMCCFILTR_EL0; |
| pmccntr_op_finish(env); |
| } |
| |
| static void pmccfiltr_write_a32(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmccntr_op_start(env); |
| /* M is not accessible from AArch32 */ |
| env->cp15.pmccfiltr_el0 = (env->cp15.pmccfiltr_el0 & PMCCFILTR_M) | |
| (value & PMCCFILTR); |
| pmccntr_op_finish(env); |
| } |
| |
| static uint64_t pmccfiltr_read_a32(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* M is not visible in AArch32 */ |
| return env->cp15.pmccfiltr_el0 & PMCCFILTR; |
| } |
| |
| static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmu_op_start(env); |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmcnten |= value; |
| pmu_op_finish(env); |
| } |
| |
| static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmu_op_start(env); |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmcnten &= ~value; |
| pmu_op_finish(env); |
| } |
| |
| static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmovsr &= ~value; |
| pmu_update_irq(env); |
| } |
| |
| static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmovsr |= value; |
| pmu_update_irq(env); |
| } |
| |
| static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value, const uint8_t counter) |
| { |
| if (counter == 31) { |
| pmccfiltr_write(env, ri, value); |
| } else if (counter < pmu_num_counters(env)) { |
| pmevcntr_op_start(env, counter); |
| |
| /* |
| * If this counter's event type is changing, store the current |
| * underlying count for the new type in c14_pmevcntr_delta[counter] so |
| * pmevcntr_op_finish has the correct baseline when it converts back to |
| * a delta. |
| */ |
| uint16_t old_event = env->cp15.c14_pmevtyper[counter] & |
| PMXEVTYPER_EVTCOUNT; |
| uint16_t new_event = value & PMXEVTYPER_EVTCOUNT; |
| if (old_event != new_event) { |
| uint64_t count = 0; |
| if (event_supported(new_event)) { |
| uint16_t event_idx = supported_event_map[new_event]; |
| count = pm_events[event_idx].get_count(env); |
| } |
| env->cp15.c14_pmevcntr_delta[counter] = count; |
| } |
| |
| env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK; |
| pmevcntr_op_finish(env, counter); |
| } |
| /* |
| * Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when |
| * PMSELR value is equal to or greater than the number of implemented |
| * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI. |
| */ |
| } |
| |
| static uint64_t pmevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri, |
| const uint8_t counter) |
| { |
| if (counter == 31) { |
| return env->cp15.pmccfiltr_el0; |
| } else if (counter < pmu_num_counters(env)) { |
| return env->cp15.c14_pmevtyper[counter]; |
| } else { |
| /* |
| * We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER |
| * are CONSTRAINED UNPREDICTABLE. See comments in pmevtyper_write(). |
| */ |
| return 0; |
| } |
| } |
| |
| static void pmevtyper_writefn(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| pmevtyper_write(env, ri, value, counter); |
| } |
| |
| static void pmevtyper_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| env->cp15.c14_pmevtyper[counter] = value; |
| |
| /* |
| * pmevtyper_rawwrite is called between a pair of pmu_op_start and |
| * pmu_op_finish calls when loading saved state for a migration. Because |
| * we're potentially updating the type of event here, the value written to |
| * c14_pmevcntr_delta by the preceeding pmu_op_start call may be for a |
| * different counter type. Therefore, we need to set this value to the |
| * current count for the counter type we're writing so that pmu_op_finish |
| * has the correct count for its calculation. |
| */ |
| uint16_t event = value & PMXEVTYPER_EVTCOUNT; |
| if (event_supported(event)) { |
| uint16_t event_idx = supported_event_map[event]; |
| env->cp15.c14_pmevcntr_delta[counter] = |
| pm_events[event_idx].get_count(env); |
| } |
| } |
| |
| static uint64_t pmevtyper_readfn(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| return pmevtyper_read(env, ri, counter); |
| } |
| |
| static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmevtyper_write(env, ri, value, env->cp15.c9_pmselr & 31); |
| } |
| |
| static uint64_t pmxevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return pmevtyper_read(env, ri, env->cp15.c9_pmselr & 31); |
| } |
| |
| static void pmevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value, uint8_t counter) |
| { |
| if (!cpu_isar_feature(any_pmuv3p5, env_archcpu(env))) { |
| /* Before FEAT_PMUv3p5, top 32 bits of event counters are RES0 */ |
| value &= MAKE_64BIT_MASK(0, 32); |
| } |
| if (counter < pmu_num_counters(env)) { |
| pmevcntr_op_start(env, counter); |
| env->cp15.c14_pmevcntr[counter] = value; |
| pmevcntr_op_finish(env, counter); |
| } |
| /* |
| * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR |
| * are CONSTRAINED UNPREDICTABLE. |
| */ |
| } |
| |
| static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint8_t counter) |
| { |
| if (counter < pmu_num_counters(env)) { |
| uint64_t ret; |
| pmevcntr_op_start(env, counter); |
| ret = env->cp15.c14_pmevcntr[counter]; |
| pmevcntr_op_finish(env, counter); |
| if (!cpu_isar_feature(any_pmuv3p5, env_archcpu(env))) { |
| /* Before FEAT_PMUv3p5, top 32 bits of event counters are RES0 */ |
| ret &= MAKE_64BIT_MASK(0, 32); |
| } |
| return ret; |
| } else { |
| /* |
| * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR |
| * are CONSTRAINED UNPREDICTABLE. |
| */ |
| return 0; |
| } |
| } |
| |
| static void pmevcntr_writefn(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| pmevcntr_write(env, ri, value, counter); |
| } |
| |
| static uint64_t pmevcntr_readfn(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| return pmevcntr_read(env, ri, counter); |
| } |
| |
| static void pmevcntr_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| assert(counter < pmu_num_counters(env)); |
| env->cp15.c14_pmevcntr[counter] = value; |
| pmevcntr_write(env, ri, value, counter); |
| } |
| |
| static uint64_t pmevcntr_rawread(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| assert(counter < pmu_num_counters(env)); |
| return env->cp15.c14_pmevcntr[counter]; |
| } |
| |
| static void pmxevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmevcntr_write(env, ri, value, env->cp15.c9_pmselr & 31); |
| } |
| |
| static uint64_t pmxevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return pmevcntr_read(env, ri, env->cp15.c9_pmselr & 31); |
| } |
| |
| static void pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| env->cp15.c9_pmuserenr = value & 0xf; |
| } else { |
| env->cp15.c9_pmuserenr = value & 1; |
| } |
| } |
| |
| static void pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* We have no event counters so only the C bit can be changed */ |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pminten |= value; |
| pmu_update_irq(env); |
| } |
| |
| static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pminten &= ~value; |
| pmu_update_irq(env); |
| } |
| |
| static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Note that even though the AArch64 view of this register has bits |
| * [10:0] all RES0 we can only mask the bottom 5, to comply with the |
| * architectural requirements for bits which are RES0 only in some |
| * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7 |
| * requires the bottom five bits to be RAZ/WI because they're UNK/SBZP.) |
| */ |
| raw_write(env, ri, value & ~0x1FULL); |
| } |
| |
| static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| /* Begin with base v8.0 state. */ |
| uint64_t valid_mask = 0x3fff; |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t changed; |
| |
| /* |
| * Because SCR_EL3 is the "real" cpreg and SCR is the alias, reset always |
| * passes the reginfo for SCR_EL3, which has type ARM_CP_STATE_AA64. |
| * Instead, choose the format based on the mode of EL3. |
| */ |
| if (arm_el_is_aa64(env, 3)) { |
| value |= SCR_FW | SCR_AW; /* RES1 */ |
| valid_mask &= ~SCR_NET; /* RES0 */ |
| |
| if (!cpu_isar_feature(aa64_aa32_el1, cpu) && |
| !cpu_isar_feature(aa64_aa32_el2, cpu)) { |
| value |= SCR_RW; /* RAO/WI */ |
| } |
| if (cpu_isar_feature(aa64_ras, cpu)) { |
| valid_mask |= SCR_TERR; |
| } |
| if (cpu_isar_feature(aa64_lor, cpu)) { |
| valid_mask |= SCR_TLOR; |
| } |
| if (cpu_isar_feature(aa64_pauth, cpu)) { |
| valid_mask |= SCR_API | SCR_APK; |
| } |
| if (cpu_isar_feature(aa64_sel2, cpu)) { |
| valid_mask |= SCR_EEL2; |
| } |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| valid_mask |= SCR_ATA; |
| } |
| if (cpu_isar_feature(aa64_scxtnum, cpu)) { |
| valid_mask |= SCR_ENSCXT; |
| } |
| if (cpu_isar_feature(aa64_doublefault, cpu)) { |
| valid_mask |= SCR_EASE | SCR_NMEA; |
| } |
| if (cpu_isar_feature(aa64_sme, cpu)) { |
| valid_mask |= SCR_ENTP2; |
| } |
| if (cpu_isar_feature(aa64_hcx, cpu)) { |
| valid_mask |= SCR_HXEN; |
| } |
| if (cpu_isar_feature(aa64_fgt, cpu)) { |
| valid_mask |= SCR_FGTEN; |
| } |
| } else { |
| valid_mask &= ~(SCR_RW | SCR_ST); |
| if (cpu_isar_feature(aa32_ras, cpu)) { |
| valid_mask |= SCR_TERR; |
| } |
| } |
| |
| if (!arm_feature(env, ARM_FEATURE_EL2)) { |
| valid_mask &= ~SCR_HCE; |
| |
| /* |
| * On ARMv7, SMD (or SCD as it is called in v7) is only |
| * supported if EL2 exists. The bit is UNK/SBZP when |
| * EL2 is unavailable. In QEMU ARMv7, we force it to always zero |
| * when EL2 is unavailable. |
| * On ARMv8, this bit is always available. |
| */ |
| if (arm_feature(env, ARM_FEATURE_V7) && |
| !arm_feature(env, ARM_FEATURE_V8)) { |
| valid_mask &= ~SCR_SMD; |
| } |
| } |
| |
| /* Clear all-context RES0 bits. */ |
| value &= valid_mask; |
| changed = env->cp15.scr_el3 ^ value; |
| env->cp15.scr_el3 = value; |
| |
| /* |
| * If SCR_EL3.NS changes, i.e. arm_is_secure_below_el3, then |
| * we must invalidate all TLBs below EL3. |
| */ |
| if (changed & SCR_NS) { |
| tlb_flush_by_mmuidx(env_cpu(env), (ARMMMUIdxBit_E10_0 | |
| ARMMMUIdxBit_E20_0 | |
| ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E20_2 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E20_2_PAN | |
| ARMMMUIdxBit_E2)); |
| } |
| } |
| |
| static void scr_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* |
| * scr_write will set the RES1 bits on an AArch64-only CPU. |
| * The reset value will be 0x30 on an AArch64-only CPU and 0 otherwise. |
| */ |
| scr_write(env, ri, 0); |
| } |
| |
| static CPAccessResult access_tid4(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && |
| (arm_hcr_el2_eff(env) & (HCR_TID2 | HCR_TID4))) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* |
| * Acquire the CSSELR index from the bank corresponding to the CCSIDR |
| * bank |
| */ |
| uint32_t index = A32_BANKED_REG_GET(env, csselr, |
| ri->secure & ARM_CP_SECSTATE_S); |
| |
| return cpu->ccsidr[index]; |
| } |
| |
| static void csselr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| raw_write(env, ri, value & 0xf); |
| } |
| |
| static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| CPUState *cs = env_cpu(env); |
| bool el1 = arm_current_el(env) == 1; |
| uint64_t hcr_el2 = el1 ? arm_hcr_el2_eff(env) : 0; |
| uint64_t ret = 0; |
| |
| if (hcr_el2 & HCR_IMO) { |
| if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) { |
| ret |= CPSR_I; |
| } |
| } else { |
| if (cs->interrupt_request & CPU_INTERRUPT_HARD) { |
| ret |= CPSR_I; |
| } |
| } |
| |
| if (hcr_el2 & HCR_FMO) { |
| if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) { |
| ret |= CPSR_F; |
| } |
| } else { |
| if (cs->interrupt_request & CPU_INTERRUPT_FIQ) { |
| ret |= CPSR_F; |
| } |
| } |
| |
| if (hcr_el2 & HCR_AMO) { |
| if (cs->interrupt_request & CPU_INTERRUPT_VSERR) { |
| ret |= CPSR_A; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static CPAccessResult access_aa64_tid1(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_aa32_tid1(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| return access_aa64_tid1(env, ri, isread); |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo v7_cp_reginfo[] = { |
| /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */ |
| { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| /* |
| * Performance monitors are implementation defined in v7, |
| * but with an ARM recommended set of registers, which we |
| * follow. |
| * |
| * Performance registers fall into three categories: |
| * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR) |
| * (b) RO in PL0 (ie UNDEF on write), RW in PL1 (PMUSERENR) |
| * (c) UNDEF in PL0 if PMUSERENR.EN==0, otherwise accessible (all others) |
| * For the cases controlled by PMUSERENR we must set .access to PL0_RW |
| * or PL0_RO as appropriate and then check PMUSERENR in the helper fn. |
| */ |
| { .name = "PMCNTENSET", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 1, |
| .access = PL0_RW, .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten), |
| .writefn = pmcntenset_write, |
| .accessfn = pmreg_access, |
| .fgt = FGT_PMCNTEN, |
| .raw_writefn = raw_write }, |
| { .name = "PMCNTENSET_EL0", .state = ARM_CP_STATE_AA64, .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 1, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMCNTEN, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .resetvalue = 0, |
| .writefn = pmcntenset_write, .raw_writefn = raw_write }, |
| { .name = "PMCNTENCLR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 2, |
| .access = PL0_RW, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten), |
| .accessfn = pmreg_access, |
| .fgt = FGT_PMCNTEN, |
| .writefn = pmcntenclr_write, |
| .type = ARM_CP_ALIAS | ARM_CP_IO }, |
| { .name = "PMCNTENCLR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 2, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMCNTEN, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), |
| .writefn = pmcntenclr_write }, |
| { .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3, |
| .access = PL0_RW, .type = ARM_CP_IO, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), |
| .accessfn = pmreg_access, |
| .fgt = FGT_PMOVS, |
| .writefn = pmovsr_write, |
| .raw_writefn = raw_write }, |
| { .name = "PMOVSCLR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 3, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMOVS, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), |
| .writefn = pmovsr_write, |
| .raw_writefn = raw_write }, |
| { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, |
| .access = PL0_W, .accessfn = pmreg_access_swinc, |
| .fgt = FGT_PMSWINC_EL0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .writefn = pmswinc_write }, |
| { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4, |
| .access = PL0_W, .accessfn = pmreg_access_swinc, |
| .fgt = FGT_PMSWINC_EL0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .writefn = pmswinc_write }, |
| { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, |
| .access = PL0_RW, .type = ARM_CP_ALIAS, |
| .fgt = FGT_PMSELR_EL0, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr), |
| .accessfn = pmreg_access_selr, .writefn = pmselr_write, |
| .raw_writefn = raw_write}, |
| { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5, |
| .access = PL0_RW, .accessfn = pmreg_access_selr, |
| .fgt = FGT_PMSELR_EL0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr), |
| .writefn = pmselr_write, .raw_writefn = raw_write, }, |
| { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0, |
| .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fgt = FGT_PMCCNTR_EL0, |
| .readfn = pmccntr_read, .writefn = pmccntr_write32, |
| .accessfn = pmreg_access_ccntr }, |
| { .name = "PMCCNTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0, |
| .access = PL0_RW, .accessfn = pmreg_access_ccntr, |
| .fgt = FGT_PMCCNTR_EL0, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt), |
| .readfn = pmccntr_read, .writefn = pmccntr_write, |
| .raw_readfn = raw_read, .raw_writefn = raw_write, }, |
| { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7, |
| .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMCCFILTR_EL0, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .resetvalue = 0, }, |
| { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7, |
| .writefn = pmccfiltr_write, .raw_writefn = raw_write, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMCCFILTR_EL0, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0), |
| .resetvalue = 0, }, |
| { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access, |
| .fgt = FGT_PMEVTYPERN_EL0, |
| .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, |
| { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access, |
| .fgt = FGT_PMEVTYPERN_EL0, |
| .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, |
| { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access_xevcntr, |
| .fgt = FGT_PMEVCNTRN_EL0, |
| .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, |
| { .name = "PMXEVCNTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 2, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access_xevcntr, |
| .fgt = FGT_PMEVCNTRN_EL0, |
| .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, |
| { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0, |
| .access = PL0_R | PL1_RW, .accessfn = access_tpm, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmuserenr), |
| .resetvalue = 0, |
| .writefn = pmuserenr_write, .raw_writefn = raw_write }, |
| { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 0, |
| .access = PL0_R | PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr), |
| .resetvalue = 0, |
| .writefn = pmuserenr_write, .raw_writefn = raw_write }, |
| { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .fgt = FGT_PMINTEN, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten), |
| .resetvalue = 0, |
| .writefn = pmintenset_write, .raw_writefn = raw_write }, |
| { .name = "PMINTENSET_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .fgt = FGT_PMINTEN, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), |
| .writefn = pmintenset_write, .raw_writefn = raw_write, |
| .resetvalue = 0x0 }, |
| { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .fgt = FGT_PMINTEN, |
| .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), |
| .writefn = pmintenclr_write, }, |
| { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .fgt = FGT_PMINTEN, |
| .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), |
| .writefn = pmintenclr_write }, |
| { .name = "CCSIDR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0, |
| .access = PL1_R, |
| .accessfn = access_tid4, |
| .fgt = FGT_CCSIDR_EL1, |
| .readfn = ccsidr_read, .type = ARM_CP_NO_RAW }, |
| { .name = "CSSELR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0, |
| .access = PL1_RW, |
| .accessfn = access_tid4, |
| .fgt = FGT_CSSELR_EL1, |
| .writefn = csselr_write, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s), |
| offsetof(CPUARMState, cp15.csselr_ns) } }, |
| /* |
| * Auxiliary ID register: this actually has an IMPDEF value but for now |
| * just RAZ for all cores: |
| */ |
| { .name = "AIDR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid1, |
| .fgt = FGT_AIDR_EL1, |
| .resetvalue = 0 }, |
| /* |
| * Auxiliary fault status registers: these also are IMPDEF, and we |
| * choose to RAZ/WI for all cores. |
| */ |
| { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_AFSR0_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_AFSR1_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* |
| * MAIR can just read-as-written because we don't implement caches |
| * and so don't need to care about memory attributes. |
| */ |
| { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_MAIR_EL1, |
| .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), |
| .resetvalue = 0 }, |
| { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[3]), |
| .resetvalue = 0 }, |
| /* |
| * For non-long-descriptor page tables these are PRRR and NMRR; |
| * regardless they still act as reads-as-written for QEMU. |
| */ |
| /* |
| * MAIR0/1 are defined separately from their 64-bit counterpart which |
| * allows them to assign the correct fieldoffset based on the endianness |
| * handled in the field definitions. |
| */ |
| { .name = "MAIR0", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s), |
| offsetof(CPUARMState, cp15.mair0_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "MAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s), |
| offsetof(CPUARMState, cp15.mair1_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "ISR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 0, |
| .fgt = FGT_ISR_EL1, |
| .type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read }, |
| /* 32 bit ITLB invalidates */ |
| { .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiall_write }, |
| { .name = "ITLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "ITLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiasid_write }, |
| /* 32 bit DTLB invalidates */ |
| { .name = "DTLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiall_write }, |
| { .name = "DTLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "DTLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiasid_write }, |
| /* 32 bit TLB invalidates */ |
| { .name = "TLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiall_write }, |
| { .name = "TLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "TLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiasid_write }, |
| { .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimvaa_write }, |
| }; |
| |
| static const ARMCPRegInfo v7mp_cp_reginfo[] = { |
| /* 32 bit TLB invalidates, Inner Shareable */ |
| { .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlbis, |
| .writefn = tlbiall_is_write }, |
| { .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlbis, |
| .writefn = tlbimva_is_write }, |
| { .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlbis, |
| .writefn = tlbiasid_is_write }, |
| { .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlbis, |
| .writefn = tlbimvaa_is_write }, |
| }; |
| |
| static const ARMCPRegInfo pmovsset_cp_reginfo[] = { |
| /* PMOVSSET is not implemented in v7 before v7ve */ |
| { .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMOVS, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), |
| .writefn = pmovsset_write, |
| .raw_writefn = raw_write }, |
| { .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMOVS, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), |
| .writefn = pmovsset_write, |
| .raw_writefn = raw_write }, |
| }; |
| |
| static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= 1; |
| env->teecr = value; |
| } |
| |
| static CPAccessResult teecr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* |
| * HSTR.TTEE only exists in v7A, not v8A, but v8A doesn't have T2EE |
| * at all, so we don't need to check whether we're v8A. |
| */ |
| if (arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) && |
| (env->cp15.hstr_el2 & HSTR_TTEE)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult teehbr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 0 && (env->teecr & 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| return teecr_access(env, ri, isread); |
| } |
| |
| static const ARMCPRegInfo t2ee_cp_reginfo[] = { |
| { .name = "TEECR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 6, .opc2 = 0, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, teecr), |
| .resetvalue = 0, |
| .writefn = teecr_write, .accessfn = teecr_access }, |
| { .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0, |
| .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr), |
| .accessfn = teehbr_access, .resetvalue = 0 }, |
| }; |
| |
| static const ARMCPRegInfo v6k_cp_reginfo[] = { |
| { .name = "TPIDR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 2, .crn = 13, .crm = 0, |
| .access = PL0_RW, |
| .fgt = FGT_TPIDR_EL0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[0]), .resetvalue = 0 }, |
| { .name = "TPIDRURW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL0_RW, |
| .fgt = FGT_TPIDR_EL0, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrurw_s), |
| offsetoflow32(CPUARMState, cp15.tpidrurw_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0, |
| .access = PL0_R | PL1_W, |
| .fgt = FGT_TPIDRRO_EL0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]), |
| .resetvalue = 0}, |
| { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3, |
| .access = PL0_R | PL1_W, |
| .fgt = FGT_TPIDRRO_EL0, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s), |
| offsetoflow32(CPUARMState, cp15.tpidruro_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "TPIDR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .opc2 = 4, .crn = 13, .crm = 0, |
| .access = PL1_RW, |
| .fgt = FGT_TPIDR_EL1, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[1]), .resetvalue = 0 }, |
| { .name = "TPIDRPRW", .opc1 = 0, .cp = 15, .crn = 13, .crm = 0, .opc2 = 4, |
| .access = PL1_RW, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrprw_s), |
| offsetoflow32(CPUARMState, cp15.tpidrprw_ns) }, |
| .resetvalue = 0 }, |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| |
| static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* |
| * CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. |
| * Writable only at the highest implemented exception level. |
| */ |
| int el = arm_current_el(env); |
| uint64_t hcr; |
| uint32_t cntkctl; |
| |
| switch (el) { |
| case 0: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| cntkctl = env->cp15.cnthctl_el2; |
| } else { |
| cntkctl = env->cp15.c14_cntkctl; |
| } |
| if (!extract32(cntkctl, 0, 2)) { |
| return CP_ACCESS_TRAP; |
| } |
| break; |
| case 1: |
| if (!isread && ri->state == ARM_CP_STATE_AA32 && |
| arm_is_secure_below_el3(env)) { |
| /* Accesses from 32-bit Secure EL1 UNDEF (*not* trap to EL3!) */ |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| break; |
| case 2: |
| case 3: |
| break; |
| } |
| |
| if (!isread && el < arm_highest_el(env)) { |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, |
| bool isread) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| bool has_el2 = arm_is_el2_enabled(env); |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| switch (cur_el) { |
| case 0: |
| /* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]CTEN. */ |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| return (extract32(env->cp15.cnthctl_el2, timeridx, 1) |
| ? CP_ACCESS_OK : CP_ACCESS_TRAP_EL2); |
| } |
| |
| /* CNT[PV]CT: not visible from PL0 if EL0[PV]CTEN is zero */ |
| if (!extract32(env->cp15.c14_cntkctl, timeridx, 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| |
| /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PCTEN. */ |
| if (hcr & HCR_E2H) { |
| if (timeridx == GTIMER_PHYS && |
| !extract32(env->cp15.cnthctl_el2, 10, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ |
| if (has_el2 && timeridx == GTIMER_PHYS && |
| !extract32(env->cp15.cnthctl_el2, 1, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| break; |
| |
| case 1: |
| /* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */ |
| if (has_el2 && timeridx == GTIMER_PHYS && |
| (hcr & HCR_E2H |
| ? !extract32(env->cp15.cnthctl_el2, 10, 1) |
| : !extract32(env->cp15.cnthctl_el2, 0, 1))) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult gt_timer_access(CPUARMState *env, int timeridx, |
| bool isread) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| bool has_el2 = arm_is_el2_enabled(env); |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| switch (cur_el) { |
| case 0: |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| /* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]TEN. */ |
| return (extract32(env->cp15.cnthctl_el2, 9 - timeridx, 1) |
| ? CP_ACCESS_OK : CP_ACCESS_TRAP_EL2); |
| } |
| |
| /* |
| * CNT[PV]_CVAL, CNT[PV]_CTL, CNT[PV]_TVAL: not visible from |
| * EL0 if EL0[PV]TEN is zero. |
| */ |
| if (!extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| /* fall through */ |
| |
| case 1: |
| if (has_el2 && timeridx == GTIMER_PHYS) { |
| if (hcr & HCR_E2H) { |
| /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PTEN. */ |
| if (!extract32(env->cp15.cnthctl_el2, 11, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ |
| if (!extract32(env->cp15.cnthctl_el2, 1, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult gt_pct_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_counter_access(env, GTIMER_PHYS, isread); |
| } |
| |
| static CPAccessResult gt_vct_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_counter_access(env, GTIMER_VIRT, isread); |
| } |
| |
| static CPAccessResult gt_ptimer_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_timer_access(env, GTIMER_PHYS, isread); |
| } |
| |
| static CPAccessResult gt_vtimer_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_timer_access(env, GTIMER_VIRT, isread); |
| } |
| |
| static CPAccessResult gt_stimer_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* |
| * The AArch64 register view of the secure physical timer is |
| * always accessible from EL3, and configurably accessible from |
| * Secure EL1. |
| */ |
| switch (arm_current_el(env)) { |
| case 1: |
| if (!arm_is_secure(env)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (!(env->cp15.scr_el3 & SCR_ST)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| case 0: |
| case 2: |
| return CP_ACCESS_TRAP; |
| case 3: |
| return CP_ACCESS_OK; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static uint64_t gt_get_countervalue(CPUARMState *env) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / gt_cntfrq_period_ns(cpu); |
| } |
| |
| static void gt_recalc_timer(ARMCPU *cpu, int timeridx) |
| { |
| ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; |
| |
| if (gt->ctl & 1) { |
| /* |
| * Timer enabled: calculate and set current ISTATUS, irq, and |
| * reset timer to when ISTATUS next has to change |
| */ |
| uint64_t offset = timeridx == GTIMER_VIRT ? |
| cpu->env.cp15.cntvoff_el2 : 0; |
| uint64_t count = gt_get_countervalue(&cpu->env); |
| /* Note that this must be unsigned 64 bit arithmetic: */ |
| int istatus = count - offset >= gt->cval; |
| uint64_t nexttick; |
| int irqstate; |
| |
| gt->ctl = deposit32(gt->ctl, 2, 1, istatus); |
| |
| irqstate = (istatus && !(gt->ctl & 2)); |
| qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate); |
| |
| if (istatus) { |
| /* Next transition is when count rolls back over to zero */ |
| nexttick = UINT64_MAX; |
| } else { |
| /* Next transition is when we hit cval */ |
| nexttick = gt->cval + offset; |
| } |
| /* |
| * Note that the desired next expiry time might be beyond the |
| * signed-64-bit range of a QEMUTimer -- in this case we just |
| * set the timer for as far in the future as possible. When the |
| * timer expires we will reset the timer for any remaining period. |
| */ |
| if (nexttick > INT64_MAX / gt_cntfrq_period_ns(cpu)) { |
| timer_mod_ns(cpu->gt_timer[timeridx], INT64_MAX); |
| } else { |
| timer_mod(cpu->gt_timer[timeridx], nexttick); |
| } |
| trace_arm_gt_recalc(timeridx, irqstate, nexttick); |
| } else { |
| /* Timer disabled: ISTATUS and timer output always clear */ |
| gt->ctl &= ~4; |
| qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0); |
| timer_del(cpu->gt_timer[timeridx]); |
| trace_arm_gt_recalc_disabled(timeridx); |
| } |
| } |
| |
| static void gt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| timer_del(cpu->gt_timer[timeridx]); |
| } |
| |
| static uint64_t gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_get_countervalue(env); |
| } |
| |
| static uint64_t gt_virt_cnt_offset(CPUARMState *env) |
| { |
| uint64_t hcr; |
| |
| switch (arm_current_el(env)) { |
| case 2: |
| hcr = arm_hcr_el2_eff(env); |
| if (hcr & HCR_E2H) { |
| return 0; |
| } |
| break; |
| case 0: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| return 0; |
| } |
| break; |
| } |
| |
| return env->cp15.cntvoff_el2; |
| } |
| |
| static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_get_countervalue(env) - gt_virt_cnt_offset(env); |
| } |
| |
| static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx, |
| uint64_t value) |
| { |
| trace_arm_gt_cval_write(timeridx, value); |
| env->cp15.c14_timer[timeridx].cval = value; |
| gt_recalc_timer(env_archcpu(env), timeridx); |
| } |
| |
| static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx) |
| { |
| uint64_t offset = 0; |
| |
| switch (timeridx) { |
| case GTIMER_VIRT: |
| case GTIMER_HYPVIRT: |
| offset = gt_virt_cnt_offset(env); |
| break; |
| } |
| |
| return (uint32_t)(env->cp15.c14_timer[timeridx].cval - |
| (gt_get_countervalue(env) - offset)); |
| } |
| |
| static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx, |
| uint64_t value) |
| { |
| uint64_t offset = 0; |
| |
| switch (timeridx) { |
| case GTIMER_VIRT: |
| case GTIMER_HYPVIRT: |
| offset = gt_virt_cnt_offset(env); |
| break; |
| } |
| |
| trace_arm_gt_tval_write(timeridx, value); |
| env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) - offset + |
| sextract64(value, 0, 32); |
| gt_recalc_timer(env_archcpu(env), timeridx); |
| } |
| |
| static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint32_t oldval = env->cp15.c14_timer[timeridx].ctl; |
| |
| trace_arm_gt_ctl_write(timeridx, value); |
| env->cp15.c14_timer[timeridx].ctl = deposit64(oldval, 0, 2, value); |
| if ((oldval ^ value) & 1) { |
| /* Enable toggled */ |
| gt_recalc_timer(cpu, timeridx); |
| } else if ((oldval ^ value) & 2) { |
| /* |
| * IMASK toggled: don't need to recalculate, |
| * just set the interrupt line based on ISTATUS |
| */ |
| int irqstate = (oldval & 4) && !(value & 2); |
| |
| trace_arm_gt_imask_toggle(timeridx, irqstate); |
| qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate); |
| } |
| } |
| |
| static void gt_phys_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_PHYS); |
| } |
| |
| static void gt_phys_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_PHYS, value); |
| } |
| |
| static uint64_t gt_phys_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_PHYS); |
| } |
| |
| static void gt_phys_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_PHYS, value); |
| } |
| |
| static void gt_phys_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_PHYS, value); |
| } |
| |
| static int gt_phys_redir_timeridx(CPUARMState *env) |
| { |
| switch (arm_mmu_idx(env)) { |
| case ARMMMUIdx_E20_0: |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| return GTIMER_HYP; |
| default: |
| return GTIMER_PHYS; |
| } |
| } |
| |
| static int gt_virt_redir_timeridx(CPUARMState *env) |
| { |
| switch (arm_mmu_idx(env)) { |
| case ARMMMUIdx_E20_0: |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| return GTIMER_HYPVIRT; |
| default: |
| return GTIMER_VIRT; |
| } |
| } |
| |
| static uint64_t gt_phys_redir_cval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].cval; |
| } |
| |
| static void gt_phys_redir_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| gt_cval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_phys_redir_tval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| return gt_tval_read(env, ri, timeridx); |
| } |
| |
| static void gt_phys_redir_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| gt_tval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_phys_redir_ctl_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].ctl; |
| } |
| |
| static void gt_phys_redir_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| gt_ctl_write(env, ri, timeridx, value); |
| } |
| |
| static void gt_virt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_VIRT); |
| } |
| |
| static void gt_virt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_VIRT, value); |
| } |
| |
| static uint64_t gt_virt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_VIRT); |
| } |
| |
| static void gt_virt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_VIRT, value); |
| } |
| |
| static void gt_virt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_VIRT, value); |
| } |
| |
| static void gt_cntvoff_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| trace_arm_gt_cntvoff_write(value); |
| raw_write(env, ri, value); |
| gt_recalc_timer(cpu, GTIMER_VIRT); |
| } |
| |
| static uint64_t gt_virt_redir_cval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].cval; |
| } |
| |
| static void gt_virt_redir_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| gt_cval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_virt_redir_tval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| return gt_tval_read(env, ri, timeridx); |
| } |
| |
| static void gt_virt_redir_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| gt_tval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_virt_redir_ctl_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].ctl; |
| } |
| |
| static void gt_virt_redir_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| gt_ctl_write(env, ri, timeridx, value); |
| } |
| |
| static void gt_hyp_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_HYP); |
| } |
| |
| static void gt_hyp_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_HYP, value); |
| } |
| |
| static uint64_t gt_hyp_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_HYP); |
| } |
| |
| static void gt_hyp_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_HYP, value); |
| } |
| |
| static void gt_hyp_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_HYP, value); |
| } |
| |
| static void gt_sec_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_SEC); |
| } |
| |
| static void gt_sec_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_SEC, value); |
| } |
| |
| static uint64_t gt_sec_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_SEC); |
| } |
| |
| static void gt_sec_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_SEC, value); |
| } |
| |
| static void gt_sec_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_SEC, value); |
| } |
| |
| static void gt_hv_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_HYPVIRT); |
| } |
| |
| static void gt_hv_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_HYPVIRT, value); |
| } |
| |
| static uint64_t gt_hv_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_HYPVIRT); |
| } |
| |
| static void gt_hv_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_HYPVIRT, value); |
| } |
| |
| static void gt_hv_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_HYPVIRT, value); |
| } |
| |
| void arm_gt_ptimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_PHYS); |
| } |
| |
| void arm_gt_vtimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_VIRT); |
| } |
| |
| void arm_gt_htimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_HYP); |
| } |
| |
| void arm_gt_stimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_SEC); |
| } |
| |
| void arm_gt_hvtimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_HYPVIRT); |
| } |
| |
| static void arm_gt_cntfrq_reset(CPUARMState *env, const ARMCPRegInfo *opaque) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| cpu->env.cp15.c14_cntfrq = cpu->gt_cntfrq_hz; |
| } |
| |
| static const ARMCPRegInfo generic_timer_cp_reginfo[] = { |
| /* |
| * Note that CNTFRQ is purely reads-as-written for the benefit |
| * of software; writing it doesn't actually change the timer frequency. |
| * Our reset value matches the fixed frequency we implement the timer at. |
| */ |
| { .name = "CNTFRQ", .cp = 15, .crn = 14, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .type = ARM_CP_ALIAS, |
| .access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c14_cntfrq), |
| }, |
| { .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0, |
| .access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq), |
| .resetfn = arm_gt_cntfrq_reset, |
| }, |
| /* overall control: mostly access permissions */ |
| { .name = "CNTKCTL", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 14, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_cntkctl), |
| .resetvalue = 0, |
| }, |
| /* per-timer control */ |
| { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1, |
| .secure = ARM_CP_SECSTATE_NS, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .fieldoffset = offsetoflow32(CPUARMState, |
| cp15.c14_timer[GTIMER_PHYS].ctl), |
| .readfn = gt_phys_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CTL_S", |
| .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1, |
| .secure = ARM_CP_SECSTATE_S, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .fieldoffset = offsetoflow32(CPUARMState, |
| cp15.c14_timer[GTIMER_SEC].ctl), |
| .writefn = gt_sec_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 1, |
| .type = ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl), |
| .resetvalue = 0, |
| .readfn = gt_phys_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, |
| .fieldoffset = offsetoflow32(CPUARMState, |
| cp15.c14_timer[GTIMER_VIRT].ctl), |
| .readfn = gt_virt_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CTL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl), |
| .resetvalue = 0, |
| .readfn = gt_virt_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| /* TimerValue views: a 32 bit downcounting view of the underlying state */ |
| { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .secure = ARM_CP_SECSTATE_NS, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .readfn = gt_phys_redir_tval_read, .writefn = gt_phys_redir_tval_write, |
| }, |
| { .name = "CNTP_TVAL_S", |
| .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .secure = ARM_CP_SECSTATE_S, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .readfn = gt_sec_tval_read, .writefn = gt_sec_tval_write, |
| }, |
| { .name = "CNTP_TVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, .resetfn = gt_phys_timer_reset, |
| .readfn = gt_phys_redir_tval_read, .writefn = gt_phys_redir_tval_write, |
| }, |
| { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, |
| .readfn = gt_virt_redir_tval_read, .writefn = gt_virt_redir_tval_write, |
| }, |
| { .name = "CNTV_TVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, .resetfn = gt_virt_timer_reset, |
| .readfn = gt_virt_redir_tval_read, .writefn = gt_virt_redir_tval_write, |
| }, |
| /* The counter itself */ |
| { .name = "CNTPCT", .cp = 15, .crm = 14, .opc1 = 0, |
| .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_pct_access, |
| .readfn = gt_cnt_read, .resetfn = arm_cp_reset_ignore, |
| }, |
| { .name = "CNTPCT_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 1, |
| .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_pct_access, .readfn = gt_cnt_read, |
| }, |
| { .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1, |
| .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_vct_access, |
| .readfn = gt_virt_cnt_read, .resetfn = arm_cp_reset_ignore, |
| }, |
| { .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2, |
| .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_vct_access, .readfn = gt_virt_cnt_read, |
| }, |
| /* Comparison value, indicating when the timer goes off */ |
| { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2, |
| .secure = ARM_CP_SECSTATE_NS, |
| .access = PL0_RW, |
| .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), |
| .accessfn = gt_ptimer_access, |
| .readfn = gt_phys_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CVAL_S", .cp = 15, .crm = 14, .opc1 = 2, |
| .secure = ARM_CP_SECSTATE_S, |
| .access = PL0_RW, |
| .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval), |
| .accessfn = gt_ptimer_access, |
| .writefn = gt_sec_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 2, |
| .access = PL0_RW, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), |
| .resetvalue = 0, .accessfn = gt_ptimer_access, |
| .readfn = gt_phys_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3, |
| .access = PL0_RW, |
| .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), |
| .accessfn = gt_vtimer_access, |
| .readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 2, |
| .access = PL0_RW, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), |
| .resetvalue = 0, .accessfn = gt_vtimer_access, |
| .readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| /* |
| * Secure timer -- this is actually restricted to only EL3 |
| * and configurably Secure-EL1 via the accessfn. |
| */ |
| { .name = "CNTPS_TVAL_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW, |
| .accessfn = gt_stimer_access, |
| .readfn = gt_sec_tval_read, |
| .writefn = gt_sec_tval_write, |
| .resetfn = gt_sec_timer_reset, |
| }, |
| { .name = "CNTPS_CTL_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 1, |
| .type = ARM_CP_IO, .access = PL1_RW, |
| .accessfn = gt_stimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].ctl), |
| .resetvalue = 0, |
| .writefn = gt_sec_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTPS_CVAL_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 2, |
| .type = ARM_CP_IO, .access = PL1_RW, |
| .accessfn = gt_stimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval), |
| .writefn = gt_sec_cval_write, .raw_writefn = raw_write, |
| }, |
| }; |
| |
| static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (!(arm_hcr_el2_eff(env) & HCR_E2H)) { |
| return CP_ACCESS_TRAP; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| #else |
| |
| /* |
| * In user-mode most of the generic timer registers are inaccessible |
| * however modern kernels (4.12+) allow access to cntvct_el0 |
| */ |
| |
| static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* |
| * Currently we have no support for QEMUTimer in linux-user so we |
| * can't call gt_get_countervalue(env), instead we directly |
| * call the lower level functions. |
| */ |
| return cpu_get_clock() / gt_cntfrq_period_ns(cpu); |
| } |
| |
| static const ARMCPRegInfo generic_timer_cp_reginfo[] = { |
| { .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0, |
| .type = ARM_CP_CONST, .access = PL0_R /* no PL1_RW in linux-user */, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq), |
| .resetvalue = NANOSECONDS_PER_SECOND / GTIMER_SCALE, |
| }, |
| { .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2, |
| .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .readfn = gt_virt_cnt_read, |
| }, |
| }; |
| |
| #endif |
| |
| static void par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| raw_write(env, ri, value); |
| } else if (arm_feature(env, ARM_FEATURE_V7)) { |
| raw_write(env, ri, value & 0xfffff6ff); |
| } else { |
| raw_write(env, ri, value & 0xfffff1ff); |
| } |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| /* get_phys_addr() isn't present for user-mode-only targets */ |
| |
| static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (ri->opc2 & 4) { |
| /* |
| * The ATS12NSO* operations must trap to EL3 or EL2 if executed in |
| * Secure EL1 (which can only happen if EL3 is AArch64). |
| * They are simply UNDEF if executed from NS EL1. |
| * They function normally from EL2 or EL3. |
| */ |
| if (arm_current_el(env) == 1) { |
| if (arm_is_secure_below_el3(env)) { |
| if (env->cp15.scr_el3 & SCR_EEL2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| #ifdef CONFIG_TCG |
| static uint64_t do_ats_write(CPUARMState *env, uint64_t value, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| bool is_secure) |
| { |
| bool ret; |
| uint64_t par64; |
| bool format64 = false; |
| ARMMMUFaultInfo fi = {}; |
| GetPhysAddrResult res = {}; |
| |
| ret = get_phys_addr_with_secure(env, value, access_type, mmu_idx, |
| is_secure, &res, &fi); |
| |
| /* |
| * ATS operations only do S1 or S1+S2 translations, so we never |
| * have to deal with the ARMCacheAttrs format for S2 only. |
| */ |
| assert(!res.cacheattrs.is_s2_format); |
| |
| if (ret) { |
| /* |
| * Some kinds of translation fault must cause exceptions rather |
| * than being reported in the PAR. |
| */ |
| int current_el = arm_current_el(env); |
| int target_el; |
| uint32_t syn, fsr, fsc; |
| bool take_exc = false; |
| |
| if (fi.s1ptw && current_el == 1 |
| && arm_mmu_idx_is_stage1_of_2(mmu_idx)) { |
| /* |
| * Synchronous stage 2 fault on an access made as part of the |
| * translation table walk for AT S1E0* or AT S1E1* insn |
| * executed from NS EL1. If this is a synchronous external abort |
| * and SCR_EL3.EA == 1, then we take a synchronous external abort |
| * to EL3. Otherwise the fault is taken as an exception to EL2, |
| * and HPFAR_EL2 holds the faulting IPA. |
| */ |
| if (fi.type == ARMFault_SyncExternalOnWalk && |
| (env->cp15.scr_el3 & SCR_EA)) { |
| target_el = 3; |
| } else { |
| env->cp15.hpfar_el2 = extract64(fi.s2addr, 12, 47) << 4; |
| if (arm_is_secure_below_el3(env) && fi.s1ns) { |
| env->cp15.hpfar_el2 |= HPFAR_NS; |
| } |
| target_el = 2; |
| } |
| take_exc = true; |
| } else if (fi.type == ARMFault_SyncExternalOnWalk) { |
| /* |
| * Synchronous external aborts during a translation table walk |
| * are taken as Data Abort exceptions. |
| */ |
| if (fi.stage2) { |
| if (current_el == 3) { |
| target_el = 3; |
| } else { |
| target_el = 2; |
| } |
| } else { |
| target_el = exception_target_el(env); |
| } |
| take_exc = true; |
| } |
| |
| if (take_exc) { |
| /* Construct FSR and FSC using same logic as arm_deliver_fault() */ |
| if (target_el == 2 || arm_el_is_aa64(env, target_el) || |
| arm_s1_regime_using_lpae_format(env, mmu_idx)) { |
| fsr = arm_fi_to_lfsc(&fi); |
| fsc = extract32(fsr, 0, 6); |
| } else { |
| fsr = arm_fi_to_sfsc(&fi); |
| fsc = 0x3f; |
| } |
| /* |
| * Report exception with ESR indicating a fault due to a |
| * translation table walk for a cache maintenance instruction. |
| */ |
| syn = syn_data_abort_no_iss(current_el == target_el, 0, |
| fi.ea, 1, fi.s1ptw, 1, fsc); |
| env->exception.vaddress = value; |
| env->exception.fsr = fsr; |
| raise_exception(env, EXCP_DATA_ABORT, syn, target_el); |
| } |
| } |
| |
| if (is_a64(env)) { |
| format64 = true; |
| } else if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| /* |
| * ATS1Cxx: |
| * * TTBCR.EAE determines whether the result is returned using the |
| * 32-bit or the 64-bit PAR format |
| * * Instructions executed in Hyp mode always use the 64bit format |
| * |
| * ATS1S2NSOxx uses the 64bit format if any of the following is true: |
| * * The Non-secure TTBCR.EAE bit is set to 1 |
| * * The implementation includes EL2, and the value of HCR.VM is 1 |
| * |
| * (Note that HCR.DC makes HCR.VM behave as if it is 1.) |
| * |
| * ATS1Hx always uses the 64bit format. |
| */ |
| format64 = arm_s1_regime_using_lpae_format(env, mmu_idx); |
| |
| if (arm_feature(env, ARM_FEATURE_EL2)) { |
| if (mmu_idx == ARMMMUIdx_E10_0 || |
| mmu_idx == ARMMMUIdx_E10_1 || |
| mmu_idx == ARMMMUIdx_E10_1_PAN) { |
| format64 |= env->cp15.hcr_el2 & (HCR_VM | HCR_DC); |
| } else { |
| format64 |= arm_current_el(env) == 2; |
| } |
| } |
| } |
| |
| if (format64) { |
| /* Create a 64-bit PAR */ |
| par64 = (1 << 11); /* LPAE bit always set */ |
| if (!ret) { |
| par64 |= res.f.phys_addr & ~0xfffULL; |
| if (!res.f.attrs.secure) { |
| par64 |= (1 << 9); /* NS */ |
| } |
| par64 |= (uint64_t)res.cacheattrs.attrs << 56; /* ATTR */ |
| par64 |= res.cacheattrs.shareability << 7; /* SH */ |
| } else { |
| uint32_t fsr = arm_fi_to_lfsc(&fi); |
| |
| par64 |= 1; /* F */ |
| par64 |= (fsr & 0x3f) << 1; /* FS */ |
| if (fi.stage2) { |
| par64 |= (1 << 9); /* S */ |
| } |
| if (fi.s1ptw) { |
| par64 |= (1 << 8); /* PTW */ |
| } |
| } |
| } else { |
| /* |
| * fsr is a DFSR/IFSR value for the short descriptor |
| * translation table format (with WnR always clear). |
| * Convert it to a 32-bit PAR. |
| */ |
| if (!ret) { |
| /* We do not set any attribute bits in the PAR */ |
| if (res.f.lg_page_size == 24 |
| && arm_feature(env, ARM_FEATURE_V7)) { |
| par64 = (res.f.phys_addr & 0xff000000) | (1 << 1); |
| } else { |
| par64 = res.f.phys_addr & 0xfffff000; |
| } |
| if (!res.f.attrs.secure) { |
| par64 |= (1 << 9); /* NS */ |
| } |
| } else { |
| uint32_t fsr = arm_fi_to_sfsc(&fi); |
| |
| par64 = ((fsr & (1 << 10)) >> 5) | ((fsr & (1 << 12)) >> 6) | |
| ((fsr & 0xf) << 1) | 1; |
| } |
| } |
| return par64; |
| } |
| #endif /* CONFIG_TCG */ |
| |
| static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| #ifdef CONFIG_TCG |
| MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; |
| uint64_t par64; |
| ARMMMUIdx mmu_idx; |
| int el = arm_current_el(env); |
| bool secure = arm_is_secure_below_el3(env); |
| |
| switch (ri->opc2 & 6) { |
| case 0: |
| /* stage 1 current state PL1: ATS1CPR, ATS1CPW, ATS1CPRP, ATS1CPWP */ |
| switch (el) { |
| case 3: |
| mmu_idx = ARMMMUIdx_E3; |
| secure = true; |
| break; |
| case 2: |
| g_assert(!secure); /* ARMv8.4-SecEL2 is 64-bit only */ |
| /* fall through */ |
| case 1: |
| if (ri->crm == 9 && (env->uncached_cpsr & CPSR_PAN)) { |
| mmu_idx = ARMMMUIdx_Stage1_E1_PAN; |
| } else { |
| mmu_idx = ARMMMUIdx_Stage1_E1; |
| } |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| break; |
| case 2: |
| /* stage 1 current state PL0: ATS1CUR, ATS1CUW */ |
| switch (el) { |
| case 3: |
| mmu_idx = ARMMMUIdx_E10_0; |
| secure = true; |
| break; |
| case 2: |
| g_assert(!secure); /* ARMv8.4-SecEL2 is 64-bit only */ |
| mmu_idx = ARMMMUIdx_Stage1_E0; |
| break; |
| case 1: |
| mmu_idx = ARMMMUIdx_Stage1_E0; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| break; |
| case 4: |
| /* stage 1+2 NonSecure PL1: ATS12NSOPR, ATS12NSOPW */ |
| mmu_idx = ARMMMUIdx_E10_1; |
| secure = false; |
| break; |
| case 6: |
| /* stage 1+2 NonSecure PL0: ATS12NSOUR, ATS12NSOUW */ |
| mmu_idx = ARMMMUIdx_E10_0; |
| secure = false; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| par64 = do_ats_write(env, value, access_type, mmu_idx, secure); |
| |
| A32_BANKED_CURRENT_REG_SET(env, par, par64); |
| #else |
| /* Handled by hardware accelerator. */ |
| g_assert_not_reached(); |
| #endif /* CONFIG_TCG */ |
| } |
| |
| static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| #ifdef CONFIG_TCG |
| MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; |
| uint64_t par64; |
| |
| /* There is no SecureEL2 for AArch32. */ |
| par64 = do_ats_write(env, value, access_type, ARMMMUIdx_E2, false); |
| |
| A32_BANKED_CURRENT_REG_SET(env, par, par64); |
| #else |
| /* Handled by hardware accelerator. */ |
| g_assert_not_reached(); |
| #endif /* CONFIG_TCG */ |
| } |
| |
| static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 3 && |
| !(env->cp15.scr_el3 & (SCR_NS | SCR_EEL2))) { |
| return CP_ACCESS_TRAP; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| #ifdef CONFIG_TCG |
| MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; |
| ARMMMUIdx mmu_idx; |
| int secure = arm_is_secure_below_el3(env); |
| uint64_t hcr_el2 = arm_hcr_el2_eff(env); |
| bool regime_e20 = (hcr_el2 & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE); |
| |
| switch (ri->opc2 & 6) { |
| case 0: |
| switch (ri->opc1) { |
| case 0: /* AT S1E1R, AT S1E1W, AT S1E1RP, AT S1E1WP */ |
| if (ri->crm == 9 && (env->pstate & PSTATE_PAN)) { |
| mmu_idx = regime_e20 ? |
| ARMMMUIdx_E20_2_PAN : ARMMMUIdx_Stage1_E1_PAN; |
| } else { |
| mmu_idx = regime_e20 ? ARMMMUIdx_E20_2 : ARMMMUIdx_Stage1_E1; |
| } |
| break; |
| case 4: /* AT S1E2R, AT S1E2W */ |
| mmu_idx = hcr_el2 & HCR_E2H ? ARMMMUIdx_E20_2 : ARMMMUIdx_E2; |
| break; |
| case 6: /* AT S1E3R, AT S1E3W */ |
| mmu_idx = ARMMMUIdx_E3; |
| secure = true; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| break; |
| case 2: /* AT S1E0R, AT S1E0W */ |
| mmu_idx = regime_e20 ? ARMMMUIdx_E20_0 : ARMMMUIdx_Stage1_E0; |
| break; |
| case 4: /* AT S12E1R, AT S12E1W */ |
| mmu_idx = regime_e20 ? ARMMMUIdx_E20_2 : ARMMMUIdx_E10_1; |
| break; |
| case 6: /* AT S12E0R, AT S12E0W */ |
| mmu_idx = regime_e20 ? ARMMMUIdx_E20_0 : ARMMMUIdx_E10_0; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| env->cp15.par_el[1] = do_ats_write(env, value, access_type, |
| mmu_idx, secure); |
| #else |
| /* Handled by hardware accelerator. */ |
| g_assert_not_reached(); |
| #endif /* CONFIG_TCG */ |
| } |
| #endif |
| |
| static const ARMCPRegInfo vapa_cp_reginfo[] = { |
| { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.par_s), |
| offsetoflow32(CPUARMState, cp15.par_ns) }, |
| .writefn = par_write }, |
| #ifndef CONFIG_USER_ONLY |
| /* This underdecoding is safe because the reginfo is NO_RAW. */ |
| { .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_W, .accessfn = ats_access, |
| .writefn = ats_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, |
| #endif |
| }; |
| |
| /* Return basic MPU access permission bits. */ |
| static uint32_t simple_mpu_ap_bits(uint32_t val) |
| { |
| uint32_t ret; |
| uint32_t mask; |
| int i; |
| ret = 0; |
| mask = 3; |
| for (i = 0; i < 16; i += 2) { |
| ret |= (val >> i) & mask; |
| mask <<= 2; |
| } |
| return ret; |
| } |
| |
| /* Pad basic MPU access permission bits to extended format. */ |
| static uint32_t extended_mpu_ap_bits(uint32_t val) |
| { |
| uint32_t ret; |
| uint32_t mask; |
| int i; |
| ret = 0; |
| mask = 3; |
| for (i = 0; i < 16; i += 2) { |
| ret |= (val & mask) << i; |
| mask <<= 2; |
| } |
| return ret; |
| } |
| |
| static void pmsav5_data_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.pmsav5_data_ap = extended_mpu_ap_bits(value); |
| } |
| |
| static uint64_t pmsav5_data_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return simple_mpu_ap_bits(env->cp15.pmsav5_data_ap); |
| } |
| |
| static void pmsav5_insn_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.pmsav5_insn_ap = extended_mpu_ap_bits(value); |
| } |
| |
| static uint64_t pmsav5_insn_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return simple_mpu_ap_bits(env->cp15.pmsav5_insn_ap); |
| } |
| |
| static uint64_t pmsav7_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint32_t *u32p = *(uint32_t **)raw_ptr(env, ri); |
| |
| if (!u32p) { |
| return 0; |
| } |
| |
| u32p += env->pmsav7.rnr[M_REG_NS]; |
| return *u32p; |
| } |
| |
| static void pmsav7_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint32_t *u32p = *(uint32_t **)raw_ptr(env, ri); |
| |
| if (!u32p) { |
| return; |
| } |
| |
| u32p += env->pmsav7.rnr[M_REG_NS]; |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| *u32p = value; |
| } |
| |
| static void pmsav7_rgnr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint32_t nrgs = cpu->pmsav7_dregion; |
| |
| if (value >= nrgs) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "PMSAv7 RGNR write >= # supported regions, %" PRIu32 |
| " > %" PRIu32 "\n", (uint32_t)value, nrgs); |
| return; |
| } |
| |
| raw_write(env, ri, value); |
| } |
| |
| static void prbar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; |
| } |
| |
| static uint64_t prbar_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pmsav8.rbar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; |
| } |
| |
| static void prlar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]] = value; |
| } |
| |
| static uint64_t prlar_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pmsav8.rlar[M_REG_NS][env->pmsav7.rnr[M_REG_NS]]; |
| } |
| |
| static void prselr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* |
| * Ignore writes that would select not implemented region. |
| * This is architecturally UNPREDICTABLE. |
| */ |
| if (value >= cpu->pmsav7_dregion) { |
| return; |
| } |
| |
| env->pmsav7.rnr[M_REG_NS] = value; |
| } |
| |
| static void hprbar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| env->pmsav8.hprbar[env->pmsav8.hprselr] = value; |
| } |
| |
| static uint64_t hprbar_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pmsav8.hprbar[env->pmsav8.hprselr]; |
| } |
| |
| static void hprlar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| env->pmsav8.hprlar[env->pmsav8.hprselr] = value; |
| } |
| |
| static uint64_t hprlar_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pmsav8.hprlar[env->pmsav8.hprselr]; |
| } |
| |
| static void hprenr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint32_t n; |
| uint32_t bit; |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* Ignore writes to unimplemented regions */ |
| int rmax = MIN(cpu->pmsav8r_hdregion, 32); |
| value &= MAKE_64BIT_MASK(0, rmax); |
| |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| |
| /* Register alias is only valid for first 32 indexes */ |
| for (n = 0; n < rmax; ++n) { |
| bit = extract32(value, n, 1); |
| env->pmsav8.hprlar[n] = deposit32( |
| env->pmsav8.hprlar[n], 0, 1, bit); |
| } |
| } |
| |
| static uint64_t hprenr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint32_t n; |
| uint32_t result = 0x0; |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* Register alias is only valid for first 32 indexes */ |
| for (n = 0; n < MIN(cpu->pmsav8r_hdregion, 32); ++n) { |
| if (env->pmsav8.hprlar[n] & 0x1) { |
| result |= (0x1 << n); |
| } |
| } |
| return result; |
| } |
| |
| static void hprselr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* |
| * Ignore writes that would select not implemented region. |
| * This is architecturally UNPREDICTABLE. |
| */ |
| if (value >= cpu->pmsav8r_hdregion) { |
| return; |
| } |
| |
| env->pmsav8.hprselr = value; |
| } |
| |
| static void pmsav8r_regn_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | |
| (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); |
| |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| |
| if (ri->opc1 & 4) { |
| if (index >= cpu->pmsav8r_hdregion) { |
| return; |
| } |
| if (ri->opc2 & 0x1) { |
| env->pmsav8.hprlar[index] = value; |
| } else { |
| env->pmsav8.hprbar[index] = value; |
| } |
| } else { |
| if (index >= cpu->pmsav7_dregion) { |
| return; |
| } |
| if (ri->opc2 & 0x1) { |
| env->pmsav8.rlar[M_REG_NS][index] = value; |
| } else { |
| env->pmsav8.rbar[M_REG_NS][index] = value; |
| } |
| } |
| } |
| |
| static uint64_t pmsav8r_regn_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint8_t index = (extract32(ri->opc0, 0, 1) << 4) | |
| (extract32(ri->crm, 0, 3) << 1) | extract32(ri->opc2, 2, 1); |
| |
| if (ri->opc1 & 4) { |
| if (index >= cpu->pmsav8r_hdregion) { |
| return 0x0; |
| } |
| if (ri->opc2 & 0x1) { |
| return env->pmsav8.hprlar[index]; |
| } else { |
| return env->pmsav8.hprbar[index]; |
| } |
| } else { |
| if (index >= cpu->pmsav7_dregion) { |
| return 0x0; |
| } |
| if (ri->opc2 & 0x1) { |
| return env->pmsav8.rlar[M_REG_NS][index]; |
| } else { |
| return env->pmsav8.rbar[M_REG_NS][index]; |
| } |
| } |
| } |
| |
| static const ARMCPRegInfo pmsav8r_cp_reginfo[] = { |
| { .name = "PRBAR", |
| .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .accessfn = access_tvm_trvm, |
| .readfn = prbar_read, .writefn = prbar_write }, |
| { .name = "PRLAR", |
| .cp = 15, .opc1 = 0, .crn = 6, .crm = 3, .opc2 = 1, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .accessfn = access_tvm_trvm, |
| .readfn = prlar_read, .writefn = prlar_write }, |
| { .name = "PRSELR", .resetvalue = 0, |
| .cp = 15, .opc1 = 0, .crn = 6, .crm = 2, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .writefn = prselr_write, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]) }, |
| { .name = "HPRBAR", .resetvalue = 0, |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_NO_RAW, |
| .readfn = hprbar_read, .writefn = hprbar_write }, |
| { .name = "HPRLAR", |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_NO_RAW, |
| .readfn = hprlar_read, .writefn = hprlar_write }, |
| { .name = "HPRSELR", .resetvalue = 0, |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 2, .opc2 = 1, |
| .access = PL2_RW, |
| .writefn = hprselr_write, |
| .fieldoffset = offsetof(CPUARMState, pmsav8.hprselr) }, |
| { .name = "HPRENR", |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 1, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_NO_RAW, |
| .readfn = hprenr_read, .writefn = hprenr_write }, |
| }; |
| |
| static const ARMCPRegInfo pmsav7_cp_reginfo[] = { |
| /* |
| * Reset for all these registers is handled in arm_cpu_reset(), |
| * because the PMSAv7 is also used by M-profile CPUs, which do |
| * not register cpregs but still need the state to be reset. |
| */ |
| { .name = "DRBAR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.drbar), |
| .readfn = pmsav7_read, .writefn = pmsav7_write, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "DRSR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 2, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.drsr), |
| .readfn = pmsav7_read, .writefn = pmsav7_write, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "DRACR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 4, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.dracr), |
| .readfn = pmsav7_read, .writefn = pmsav7_write, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "RGNR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]), |
| .writefn = pmsav7_rgnr_write, |
| .resetfn = arm_cp_reset_ignore }, |
| }; |
| |
| static const ARMCPRegInfo pmsav5_cp_reginfo[] = { |
| { .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap), |
| .readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, }, |
| { .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap), |
| .readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, }, |
| { .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap), |
| .resetvalue = 0, }, |
| { .name = "INSN_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 3, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap), |
| .resetvalue = 0, }, |
| { .name = "DCACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c2_data), .resetvalue = 0, }, |
| { .name = "ICACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c2_insn), .resetvalue = 0, }, |
| /* Protection region base and size registers */ |
| { .name = "946_PRBS0", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[0]) }, |
| { .name = "946_PRBS1", .cp = 15, .crn = 6, .crm = 1, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[1]) }, |
| { .name = "946_PRBS2", .cp = 15, .crn = 6, .crm = 2, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[2]) }, |
| { .name = "946_PRBS3", .cp = 15, .crn = 6, .crm = 3, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[3]) }, |
| { .name = "946_PRBS4", .cp = 15, .crn = 6, .crm = 4, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[4]) }, |
| { .name = "946_PRBS5", .cp = 15, .crn = 6, .crm = 5, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[5]) }, |
| { .name = "946_PRBS6", .cp = 15, .crn = 6, .crm = 6, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[6]) }, |
| { .name = "946_PRBS7", .cp = 15, .crn = 6, .crm = 7, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[7]) }, |
| }; |
| |
| static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| if (arm_feature(env, ARM_FEATURE_LPAE) && (value & TTBCR_EAE)) { |
| /* |
| * Pre ARMv8 bits [21:19], [15:14] and [6:3] are UNK/SBZP when |
| * using Long-descriptor translation table format |
| */ |
| value &= ~((7 << 19) | (3 << 14) | (0xf << 3)); |
| } else if (arm_feature(env, ARM_FEATURE_EL3)) { |
| /* |
| * In an implementation that includes the Security Extensions |
| * TTBCR has additional fields PD0 [4] and PD1 [5] for |
| * Short-descriptor translation table format. |
| */ |
| value &= TTBCR_PD1 | TTBCR_PD0 | TTBCR_N; |
| } else { |
| value &= TTBCR_N; |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| /* |
| * With LPAE the TTBCR could result in a change of ASID |
| * via the TTBCR.A1 bit, so do a TLB flush. |
| */ |
| tlb_flush(CPU(cpu)); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| static void vmsa_tcr_el12_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* For AArch64 the A1 bit could result in a change of ASID, so TLB flush. */ |
| tlb_flush(CPU(cpu)); |
| raw_write(env, ri, value); |
| } |
| |
| static void vmsa_ttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* If the ASID changes (with a 64-bit write), we must flush the TLB. */ |
| if (cpreg_field_is_64bit(ri) && |
| extract64(raw_read(env, ri) ^ value, 48, 16) != 0) { |
| ARMCPU *cpu = env_archcpu(env); |
| tlb_flush(CPU(cpu)); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| static void vmsa_tcr_ttbr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * If we are running with E2&0 regime, then an ASID is active. |
| * Flush if that might be changing. Note we're not checking |
| * TCR_EL2.A1 to know if this is really the TTBRx_EL2 that |
| * holds the active ASID, only checking the field that might. |
| */ |
| if (extract64(raw_read(env, ri) ^ value, 48, 16) && |
| (arm_hcr_el2_eff(env) & HCR_E2H)) { |
| uint16_t mask = ARMMMUIdxBit_E20_2 | |
| ARMMMUIdxBit_E20_2_PAN | |
| ARMMMUIdxBit_E20_0; |
| tlb_flush_by_mmuidx(env_cpu(env), mask); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| CPUState *cs = CPU(cpu); |
| |
| /* |
| * A change in VMID to the stage2 page table (Stage2) invalidates |
| * the stage2 and combined stage 1&2 tlbs (EL10_1 and EL10_0). |
| */ |
| if (extract64(raw_read(env, ri) ^ value, 48, 16) != 0) { |
| tlb_flush_by_mmuidx(cs, alle1_tlbmask(env)); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { |
| { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s), |
| offsetoflow32(CPUARMState, cp15.dfsr_ns) }, }, |
| { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s), |
| offsetoflow32(CPUARMState, cp15.ifsr_ns) } }, |
| { .name = "DFAR", .cp = 15, .opc1 = 0, .crn = 6, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s), |
| offsetof(CPUARMState, cp15.dfar_ns) } }, |
| { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_FAR_EL1, |
| .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), |
| .resetvalue = 0, }, |
| }; |
| |
| static const ARMCPRegInfo vmsa_cp_reginfo[] = { |
| { .name = "ESR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_ESR_EL1, |
| .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, }, |
| { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_TTBR0_EL1, |
| .writefn = vmsa_ttbr_write, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), |
| offsetof(CPUARMState, cp15.ttbr0_ns) } }, |
| { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_TTBR1_EL1, |
| .writefn = vmsa_ttbr_write, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), |
| offsetof(CPUARMState, cp15.ttbr1_ns) } }, |
| { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_TCR_EL1, |
| .writefn = vmsa_tcr_el12_write, |
| .raw_writefn = raw_write, |
| .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) }, |
| { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, |
| .raw_writefn = raw_write, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]), |
| offsetoflow32(CPUARMState, cp15.tcr_el[1])} }, |
| }; |
| |
| /* |
| * Note that unlike TTBCR, writing to TTBCR2 does not require flushing |
| * qemu tlbs nor adjusting cached masks. |
| */ |
| static const ARMCPRegInfo ttbcr2_reginfo = { |
| .name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_ALIAS, |
| .bank_fieldoffsets = { |
| offsetofhigh32(CPUARMState, cp15.tcr_el[3]), |
| offsetofhigh32(CPUARMState, cp15.tcr_el[1]), |
| }, |
| }; |
| |
| static void omap_ticonfig_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.c15_ticonfig = value & 0xe7; |
| /* The OS_TYPE bit in this register changes the reported CPUID! */ |
| env->cp15.c0_cpuid = (value & (1 << 5)) ? |
| ARM_CPUID_TI915T : ARM_CPUID_TI925T; |
| } |
| |
| static void omap_threadid_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.c15_threadid = value & 0xffff; |
| } |
| |
| static void omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Wait-for-interrupt (deprecated) */ |
| cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HALT); |
| } |
| |
| static void omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * On OMAP there are registers indicating the max/min index of dcache lines |
| * containing a dirty line; cache flush operations have to reset these. |
| */ |
| env->cp15.c15_i_max = 0x000; |
| env->cp15.c15_i_min = 0xff0; |
| } |
| |
| static const ARMCPRegInfo omap_cp_reginfo[] = { |
| { .name = "DFSR", .cp = 15, .crn = 5, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_OVERRIDE, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.esr_el[1]), |
| .resetvalue = 0, }, |
| { .name = "", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TICONFIG", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_ticonfig), .resetvalue = 0, |
| .writefn = omap_ticonfig_write }, |
| { .name = "IMAX", .cp = 15, .crn = 15, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_i_max), .resetvalue = 0, }, |
| { .name = "IMIN", .cp = 15, .crn = 15, .crm = 3, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0xff0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_i_min) }, |
| { .name = "THREADID", .cp = 15, .crn = 15, .crm = 4, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_threadid), .resetvalue = 0, |
| .writefn = omap_threadid_write }, |
| { .name = "TI925T_STATUS", .cp = 15, .crn = 15, |
| .crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW, |
| .type = ARM_CP_NO_RAW, |
| .readfn = arm_cp_read_zero, .writefn = omap_wfi_write, }, |
| /* |
| * TODO: Peripheral port remap register: |
| * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller |
| * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff), |
| * when MMU is off. |
| */ |
| { .name = "OMAP_CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY, |
| .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W, |
| .type = ARM_CP_OVERRIDE | ARM_CP_NO_RAW, |
| .writefn = omap_cachemaint_write }, |
| { .name = "C9", .cp = 15, .crn = 9, |
| .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, |
| .type = ARM_CP_CONST | ARM_CP_OVERRIDE, .resetvalue = 0 }, |
| }; |
| |
| static void xscale_cpar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.c15_cpar = value & 0x3fff; |
| } |
| |
| static const ARMCPRegInfo xscale_cp_reginfo[] = { |
| { .name = "XSCALE_CPAR", |
| .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_cpar), .resetvalue = 0, |
| .writefn = xscale_cpar_write, }, |
| { .name = "XSCALE_AUXCR", |
| .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr), |
| .resetvalue = 0, }, |
| /* |
| * XScale specific cache-lockdown: since we have no cache we NOP these |
| * and hope the guest does not really rely on cache behaviour. |
| */ |
| { .name = "XSCALE_LOCK_ICACHE_LINE", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| { .name = "XSCALE_UNLOCK_ICACHE", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| { .name = "XSCALE_DCACHE_LOCK", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "XSCALE_UNLOCK_DCACHE", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| }; |
| |
| static const ARMCPRegInfo dummy_c15_cp_reginfo[] = { |
| /* |
| * RAZ/WI the whole crn=15 space, when we don't have a more specific |
| * implementation of this implementation-defined space. |
| * Ideally this should eventually disappear in favour of actually |
| * implementing the correct behaviour for all cores. |
| */ |
| { .name = "C15_IMPDEF", .cp = 15, .crn = 15, |
| .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, |
| .access = PL1_RW, |
| .type = ARM_CP_CONST | ARM_CP_NO_RAW | ARM_CP_OVERRIDE, |
| .resetvalue = 0 }, |
| }; |
| |
| static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = { |
| /* Cache status: RAZ because we have no cache so it's always clean */ |
| { .name = "CDSR", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = 0 }, |
| }; |
| |
| static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { |
| /* We never have a block transfer operation in progress */ |
| { .name = "BXSR", .cp = 15, .crn = 7, .crm = 12, .opc1 = 0, .opc2 = 4, |
| .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = 0 }, |
| /* The cache ops themselves: these all NOP for QEMU */ |
| { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, |
| { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, |
| { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0, |
| .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, |
| { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, |
| { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2, |
| .access = PL0_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, |
| { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP | ARM_CP_64BIT }, |
| }; |
| |
| static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { |
| /* |
| * The cache test-and-clean instructions always return (1 << 30) |
| * to indicate that there are no dirty cache lines. |
| */ |
| { .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3, |
| .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = (1 << 30) }, |
| { .name = "TCI_DCACHE", .cp = 15, .crn = 7, .crm = 14, .opc1 = 0, .opc2 = 3, |
| .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = (1 << 30) }, |
| }; |
| |
| static const ARMCPRegInfo strongarm_cp_reginfo[] = { |
| /* Ignore ReadBuffer accesses */ |
| { .name = "C9_READBUFFER", .cp = 15, .crn = 9, |
| .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, |
| .access = PL1_RW, .resetvalue = 0, |
| .type = ARM_CP_CONST | ARM_CP_OVERRIDE | ARM_CP_NO_RAW }, |
| }; |
| |
| static uint64_t midr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| |
| if (arm_is_el2_enabled(env) && cur_el == 1) { |
| return env->cp15.vpidr_el2; |
| } |
| return raw_read(env, ri); |
| } |
| |
| static uint64_t mpidr_read_val(CPUARMState *env) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t mpidr = cpu->mp_affinity; |
| |
| if (arm_feature(env, ARM_FEATURE_V7MP)) { |
| mpidr |= (1U << 31); |
| /* |
| * Cores which are uniprocessor (non-coherent) |
| * but still implement the MP extensions set |
| * bit 30. (For instance, Cortex-R5). |
| */ |
| if (cpu->mp_is_up) { |
| mpidr |= (1u << 30); |
| } |
| } |
| return mpidr; |
| } |
| |
| static uint64_t mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| |
| if (arm_is_el2_enabled(env) && cur_el == 1) { |
| return env->cp15.vmpidr_el2; |
| } |
| return mpidr_read_val(env); |
| } |
| |
| static const ARMCPRegInfo lpae_cp_reginfo[] = { |
| /* NOP AMAIR0/1 */ |
| { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_AMAIR_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* AMAIR1 is mapped to AMAIR_EL1[63:32] */ |
| { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0, |
| .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s), |
| offsetof(CPUARMState, cp15.par_ns)} }, |
| { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), |
| offsetof(CPUARMState, cp15.ttbr0_ns) }, |
| .writefn = vmsa_ttbr_write, }, |
| { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), |
| offsetof(CPUARMState, cp15.ttbr1_ns) }, |
| .writefn = vmsa_ttbr_write, }, |
| }; |
| |
| static uint64_t aa64_fpcr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return vfp_get_fpcr(env); |
| } |
| |
| static void aa64_fpcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| vfp_set_fpcr(env, value); |
| } |
| |
| static uint64_t aa64_fpsr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return vfp_get_fpsr(env); |
| } |
| |
| static void aa64_fpsr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| vfp_set_fpsr(env, value); |
| } |
| |
| static CPAccessResult aa64_daif_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UMA)) { |
| return CP_ACCESS_TRAP; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static void aa64_daif_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->daif = value & PSTATE_DAIF; |
| } |
| |
| static uint64_t aa64_pan_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_PAN; |
| } |
| |
| static void aa64_pan_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_PAN) | (value & PSTATE_PAN); |
| } |
| |
| static const ARMCPRegInfo pan_reginfo = { |
| .name = "PAN", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 3, |
| .type = ARM_CP_NO_RAW, .access = PL1_RW, |
| .readfn = aa64_pan_read, .writefn = aa64_pan_write |
| }; |
| |
| static uint64_t aa64_uao_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_UAO; |
| } |
| |
| static void aa64_uao_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_UAO) | (value & PSTATE_UAO); |
| } |
| |
| static const ARMCPRegInfo uao_reginfo = { |
| .name = "UAO", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 4, |
| .type = ARM_CP_NO_RAW, .access = PL1_RW, |
| .readfn = aa64_uao_read, .writefn = aa64_uao_write |
| }; |
| |
| static uint64_t aa64_dit_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_DIT; |
| } |
| |
| static void aa64_dit_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_DIT) | (value & PSTATE_DIT); |
| } |
| |
| static const ARMCPRegInfo dit_reginfo = { |
| .name = "DIT", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL0_RW, |
| .readfn = aa64_dit_read, .writefn = aa64_dit_write |
| }; |
| |
| static uint64_t aa64_ssbs_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_SSBS; |
| } |
| |
| static void aa64_ssbs_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_SSBS) | (value & PSTATE_SSBS); |
| } |
| |
| static const ARMCPRegInfo ssbs_reginfo = { |
| .name = "SSBS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 6, |
| .type = ARM_CP_NO_RAW, .access = PL0_RW, |
| .readfn = aa64_ssbs_read, .writefn = aa64_ssbs_write |
| }; |
| |
| static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* Cache invalidate/clean to Point of Coherency or Persistence... */ |
| switch (arm_current_el(env)) { |
| case 0: |
| /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ |
| if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { |
| return CP_ACCESS_TRAP; |
| } |
| /* fall through */ |
| case 1: |
| /* ... EL1 must trap to EL2 if HCR_EL2.TPCP is set. */ |
| if (arm_hcr_el2_eff(env) & HCR_TPCP) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult do_cacheop_pou_access(CPUARMState *env, uint64_t hcrflags) |
| { |
| /* Cache invalidate/clean to Point of Unification... */ |
| switch (arm_current_el(env)) { |
| case 0: |
| /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ |
| if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { |
| return CP_ACCESS_TRAP; |
| } |
| /* fall through */ |
| case 1: |
| /* ... EL1 must trap to EL2 if relevant HCR_EL2 flags are set. */ |
| if (arm_hcr_el2_eff(env) & hcrflags) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_ticab(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return do_cacheop_pou_access(env, HCR_TICAB | HCR_TPU); |
| } |
| |
| static CPAccessResult access_tocu(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return do_cacheop_pou_access(env, HCR_TOCU | HCR_TPU); |
| } |
| |
| /* |
| * See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions |
| * Page D4-1736 (DDI0487A.b) |
| */ |
| |
| static int vae1_tlbmask(CPUARMState *env) |
| { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| uint16_t mask; |
| |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| mask = ARMMMUIdxBit_E20_2 | |
| ARMMMUIdxBit_E20_2_PAN | |
| ARMMMUIdxBit_E20_0; |
| } else { |
| mask = ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E10_0; |
| } |
| return mask; |
| } |
| |
| /* Return 56 if TBI is enabled, 64 otherwise. */ |
| static int tlbbits_for_regime(CPUARMState *env, ARMMMUIdx mmu_idx, |
| uint64_t addr) |
| { |
| uint64_t tcr = regime_tcr(env, mmu_idx); |
| int tbi = aa64_va_parameter_tbi(tcr, mmu_idx); |
| int select = extract64(addr, 55, 1); |
| |
| return (tbi >> select) & 1 ? 56 : 64; |
| } |
| |
| static int vae1_tlbbits(CPUARMState *env, uint64_t addr) |
| { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| ARMMMUIdx mmu_idx; |
| |
| /* Only the regime of the mmu_idx below is significant. */ |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| mmu_idx = ARMMMUIdx_E20_0; |
| } else { |
| mmu_idx = ARMMMUIdx_E10_0; |
| } |
| |
| return tlbbits_for_regime(env, mmu_idx, addr); |
| } |
| |
| static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } |
| |
| static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } else { |
| tlb_flush_by_mmuidx(cs, mask); |
| } |
| } |
| |
| static int e2_tlbmask(CPUARMState *env) |
| { |
| return (ARMMMUIdxBit_E20_0 | |
| ARMMMUIdxBit_E20_2 | |
| ARMMMUIdxBit_E20_2_PAN | |
| ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbi_aa64_alle1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = alle1_tlbmask(env); |
| |
| tlb_flush_by_mmuidx(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = e2_tlbmask(env); |
| |
| tlb_flush_by_mmuidx(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| CPUState *cs = CPU(cpu); |
| |
| tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_E3); |
| } |
| |
| static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = alle1_tlbmask(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = e2_tlbmask(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_E3); |
| } |
| |
| static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA, EL2 |
| * Currently handles both VAE2 and VALE2, since we don't support |
| * flush-last-level-only. |
| */ |
| CPUState *cs = env_cpu(env); |
| int mask = e2_tlbmask(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| |
| tlb_flush_page_by_mmuidx(cs, pageaddr, mask); |
| } |
| |
| static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA, EL3 |
| * Currently handles both VAE3 and VALE3, since we don't support |
| * flush-last-level-only. |
| */ |
| ARMCPU *cpu = env_archcpu(env); |
| CPUState *cs = CPU(cpu); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| |
| tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_E3); |
| } |
| |
| static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| int bits = vae1_tlbbits(env, pageaddr); |
| |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits); |
| } |
| |
| static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA, EL1&0 (AArch64 version). |
| * Currently handles all of VAE1, VAAE1, VAALE1 and VALE1, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| int bits = vae1_tlbbits(env, pageaddr); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits); |
| } else { |
| tlb_flush_page_bits_by_mmuidx(cs, pageaddr, mask, bits); |
| } |
| } |
| |
| static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| int bits = tlbbits_for_regime(env, ARMMMUIdx_E2, pageaddr); |
| |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, |
| ARMMMUIdxBit_E2, bits); |
| } |
| |
| static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| int bits = tlbbits_for_regime(env, ARMMMUIdx_E3, pageaddr); |
| |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, |
| ARMMMUIdxBit_E3, bits); |
| } |
| |
| static int ipas2e1_tlbmask(CPUARMState *env, int64_t value) |
| { |
| /* |
| * The MSB of value is the NS field, which only applies if SEL2 |
| * is implemented and SCR_EL3.NS is not set (i.e. in secure mode). |
| */ |
| return (value >= 0 |
| && cpu_isar_feature(aa64_sel2, env_archcpu(env)) |
| && arm_is_secure_below_el3(env) |
| ? ARMMMUIdxBit_Stage2_S |
| : ARMMMUIdxBit_Stage2); |
| } |
| |
| static void tlbi_aa64_ipas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = ipas2e1_tlbmask(env, value); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, mask); |
| } else { |
| tlb_flush_page_by_mmuidx(cs, pageaddr, mask); |
| } |
| } |
| |
| static void tlbi_aa64_ipas2e1is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = ipas2e1_tlbmask(env, value); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| |
| tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, mask); |
| } |
| |
| #ifdef TARGET_AARCH64 |
| typedef struct { |
| uint64_t base; |
| uint64_t length; |
| } TLBIRange; |
| |
| static ARMGranuleSize tlbi_range_tg_to_gran_size(int tg) |
| { |
| /* |
| * Note that the TLBI range TG field encoding differs from both |
| * TG0 and TG1 encodings. |
| */ |
| switch (tg) { |
| case 1: |
| return Gran4K; |
| case 2: |
| return Gran16K; |
| case 3: |
| return Gran64K; |
| default: |
| return GranInvalid; |
| } |
| } |
| |
| static TLBIRange tlbi_aa64_get_range(CPUARMState *env, ARMMMUIdx mmuidx, |
| uint64_t value) |
| { |
| unsigned int page_size_granule, page_shift, num, scale, exponent; |
| /* Extract one bit to represent the va selector in use. */ |
| uint64_t select = sextract64(value, 36, 1); |
| ARMVAParameters param = aa64_va_parameters(env, select, mmuidx, true); |
| TLBIRange ret = { }; |
| ARMGranuleSize gran; |
| |
| page_size_granule = extract64(value, 46, 2); |
| gran = tlbi_range_tg_to_gran_size(page_size_granule); |
| |
| /* The granule encoded in value must match the granule in use. */ |
| if (gran != param.gran) { |
| qemu_log_mask(LOG_GUEST_ERROR, "Invalid tlbi page size granule %d\n", |
| page_size_granule); |
| return ret; |
| } |
| |
| page_shift = arm_granule_bits(gran); |
| num = extract64(value, 39, 5); |
| scale = extract64(value, 44, 2); |
| exponent = (5 * scale) + 1; |
| |
| ret.length = (num + 1) << (exponent + page_shift); |
| |
| if (param.select) { |
| ret.base = sextract64(value, 0, 37); |
| } else { |
| ret.base = extract64(value, 0, 37); |
| } |
| if (param.ds) { |
| /* |
| * With DS=1, BaseADDR is always shifted 16 so that it is able |
| * to address all 52 va bits. The input address is perforce |
| * aligned on a 64k boundary regardless of translation granule. |
| */ |
| page_shift = 16; |
| } |
| ret.base <<= page_shift; |
| |
| return ret; |
| } |
| |
| static void do_rvae_write(CPUARMState *env, uint64_t value, |
| int idxmap, bool synced) |
| { |
| ARMMMUIdx one_idx = ARM_MMU_IDX_A | ctz32(idxmap); |
| TLBIRange range; |
| int bits; |
| |
| range = tlbi_aa64_get_range(env, one_idx, value); |
| bits = tlbbits_for_regime(env, one_idx, range.base); |
| |
| if (synced) { |
| tlb_flush_range_by_mmuidx_all_cpus_synced(env_cpu(env), |
| range.base, |
| range.length, |
| idxmap, |
| bits); |
| } else { |
| tlb_flush_range_by_mmuidx(env_cpu(env), range.base, |
| range.length, idxmap, bits); |
| } |
| } |
| |
| static void tlbi_aa64_rvae1_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL1&0. |
| * Currently handles all of RVAE1, RVAAE1, RVAALE1 and RVALE1, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| |
| do_rvae_write(env, value, vae1_tlbmask(env), |
| tlb_force_broadcast(env)); |
| } |
| |
| static void tlbi_aa64_rvae1is_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, Inner/Outer Shareable EL1&0. |
| * Currently handles all of RVAE1IS, RVAE1OS, RVAAE1IS, RVAAE1OS, |
| * RVAALE1IS, RVAALE1OS, RVALE1IS and RVALE1OS, since we don't support |
| * flush-for-specific-ASID-only, flush-last-level-only or inner/outer |
| * shareable specific flushes. |
| */ |
| |
| do_rvae_write(env, value, vae1_tlbmask(env), true); |
| } |
| |
| static int vae2_tlbmask(CPUARMState *env) |
| { |
| return ARMMMUIdxBit_E2; |
| } |
| |
| static void tlbi_aa64_rvae2_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL2. |
| * Currently handles all of RVAE2 and RVALE2, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| |
| do_rvae_write(env, value, vae2_tlbmask(env), |
| tlb_force_broadcast(env)); |
| |
| |
| } |
| |
| static void tlbi_aa64_rvae2is_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, Inner/Outer Shareable, EL2. |
| * Currently handles all of RVAE2IS, RVAE2OS, RVALE2IS and RVALE2OS, |
| * since we don't support flush-for-specific-ASID-only, |
| * flush-last-level-only or inner/outer shareable specific flushes. |
| */ |
| |
| do_rvae_write(env, value, vae2_tlbmask(env), true); |
| |
| } |
| |
| static void tlbi_aa64_rvae3_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL3. |
| * Currently handles all of RVAE3 and RVALE3, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| |
| do_rvae_write(env, value, ARMMMUIdxBit_E3, tlb_force_broadcast(env)); |
| } |
| |
| static void tlbi_aa64_rvae3is_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL3, Inner/Outer Shareable. |
| * Currently handles all of RVAE3IS, RVAE3OS, RVALE3IS and RVALE3OS, |
| * since we don't support flush-for-specific-ASID-only, |
| * flush-last-level-only or inner/outer specific flushes. |
| */ |
| |
| do_rvae_write(env, value, ARMMMUIdxBit_E3, true); |
| } |
| |
| static void tlbi_aa64_ripas2e1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| do_rvae_write(env, value, ipas2e1_tlbmask(env, value), |
| tlb_force_broadcast(env)); |
| } |
| |
| static void tlbi_aa64_ripas2e1is_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| do_rvae_write(env, value, ipas2e1_tlbmask(env, value), true); |
| } |
| #endif |
| |
| static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int cur_el = arm_current_el(env); |
| |
| if (cur_el < 2) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| if (cur_el == 0) { |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| if (!(env->cp15.sctlr_el[2] & SCTLR_DZE)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| if (!(env->cp15.sctlr_el[1] & SCTLR_DZE)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (hcr & HCR_TDZ) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| } else if (hcr & HCR_TDZ) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t aa64_dczid_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int dzp_bit = 1 << 4; |
| |
| /* DZP indicates whether DC ZVA access is allowed */ |
| if (aa64_zva_access(env, NULL, false) == CP_ACCESS_OK) { |
| dzp_bit = 0; |
| } |
| return cpu->dcz_blocksize | dzp_bit; |
| } |
| |
| static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (!(env->pstate & PSTATE_SP)) { |
| /* |
| * Access to SP_EL0 is undefined if it's being used as |
| * the stack pointer. |
| */ |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t spsel_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_SP; |
| } |
| |
| static void spsel_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) |
| { |
| update_spsel(env, val); |
| } |
| |
| static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA) && !cpu->has_mpu) { |
| /* M bit is RAZ/WI for PMSA with no MPU implemented */ |
| value &= ~SCTLR_M; |
| } |
| |
| /* ??? Lots of these bits are not implemented. */ |
| |
| if (ri->state == ARM_CP_STATE_AA64 && !cpu_isar_feature(aa64_mte, cpu)) { |
| if (ri->opc1 == 6) { /* SCTLR_EL3 */ |
| value &= ~(SCTLR_ITFSB | SCTLR_TCF | SCTLR_ATA); |
| } else { |
| value &= ~(SCTLR_ITFSB | SCTLR_TCF0 | SCTLR_TCF | |
| SCTLR_ATA0 | SCTLR_ATA); |
| } |
| } |
| |
| if (raw_read(env, ri) == value) { |
| /* |
| * Skip the TLB flush if nothing actually changed; Linux likes |
| * to do a lot of pointless SCTLR writes. |
| */ |
| return; |
| } |
| |
| raw_write(env, ri, value); |
| |
| /* This may enable/disable the MMU, so do a TLB flush. */ |
| tlb_flush(CPU(cpu)); |
| |
| if (ri->type & ARM_CP_SUPPRESS_TB_END) { |
| /* |
| * Normally we would always end the TB on an SCTLR write; see the |
| * comment in ARMCPRegInfo sctlr initialization below for why Xscale |
| * is special. Setting ARM_CP_SUPPRESS_TB_END also stops the rebuild |
| * of hflags from the translator, so do it here. |
| */ |
| arm_rebuild_hflags(env); |
| } |
| } |
| |
| static void mdcr_el3_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Some MDCR_EL3 bits affect whether PMU counters are running: |
| * if we are trying to change any of those then we must |
| * bracket this update with PMU start/finish calls. |
| */ |
| bool pmu_op = (env->cp15.mdcr_el3 ^ value) & MDCR_EL3_PMU_ENABLE_BITS; |
| |
| if (pmu_op) { |
| pmu_op_start(env); |
| } |
| env->cp15.mdcr_el3 = value; |
| if (pmu_op) { |
| pmu_op_finish(env); |
| } |
| } |
| |
| static void sdcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Not all bits defined for MDCR_EL3 exist in the AArch32 SDCR */ |
| mdcr_el3_write(env, ri, value & SDCR_VALID_MASK); |
| } |
| |
| static void mdcr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Some MDCR_EL2 bits affect whether PMU counters are running: |
| * if we are trying to change any of those then we must |
| * bracket this update with PMU start/finish calls. |
| */ |
| bool pmu_op = (env->cp15.mdcr_el2 ^ value) & MDCR_EL2_PMU_ENABLE_BITS; |
| |
| if (pmu_op) { |
| pmu_op_start(env); |
| } |
| env->cp15.mdcr_el2 = value; |
| if (pmu_op) { |
| pmu_op_finish(env); |
| } |
| } |
| |
| static const ARMCPRegInfo v8_cp_reginfo[] = { |
| /* |
| * Minimal set of EL0-visible registers. This will need to be expanded |
| * significantly for system emulation of AArch64 CPUs. |
| */ |
| { .name = "NZCV", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 2, |
| .access = PL0_RW, .type = ARM_CP_NZCV }, |
| { .name = "DAIF", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 2, |
| .type = ARM_CP_NO_RAW, |
| .access = PL0_RW, .accessfn = aa64_daif_access, |
| .fieldoffset = offsetof(CPUARMState, daif), |
| .writefn = aa64_daif_write, .resetfn = arm_cp_reset_ignore }, |
| { .name = "FPCR", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 4, |
| .access = PL0_RW, .type = ARM_CP_FPU | ARM_CP_SUPPRESS_TB_END, |
| .readfn = aa64_fpcr_read, .writefn = aa64_fpcr_write }, |
| { .name = "FPSR", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 4, |
| .access = PL0_RW, .type = ARM_CP_FPU | ARM_CP_SUPPRESS_TB_END, |
| .readfn = aa64_fpsr_read, .writefn = aa64_fpsr_write }, |
| { .name = "DCZID_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 7, .crn = 0, .crm = 0, |
| .access = PL0_R, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_DCZID_EL0, |
| .readfn = aa64_dczid_read }, |
| { .name = "DC_ZVA", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_DC_ZVA, |
| #ifndef CONFIG_USER_ONLY |
| /* Avoid overhead of an access check that always passes in user-mode */ |
| .accessfn = aa64_zva_access, |
| .fgt = FGT_DCZVA, |
| #endif |
| }, |
| { .name = "CURRENTEL", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .opc2 = 2, .crn = 4, .crm = 2, |
| .access = PL1_R, .type = ARM_CP_CURRENTEL }, |
| /* Cache ops: all NOPs since we don't emulate caches */ |
| { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP, |
| .fgt = FGT_ICIALLUIS, |
| .accessfn = access_ticab }, |
| { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP, |
| .fgt = FGT_ICIALLU, |
| .accessfn = access_tocu }, |
| { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .fgt = FGT_ICIVAU, |
| .accessfn = access_tocu }, |
| { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, |
| .access = PL1_W, .accessfn = aa64_cacheop_poc_access, |
| .fgt = FGT_DCIVAC, |
| .type = ARM_CP_NOP }, |
| { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, |
| .fgt = FGT_DCISW, |
| .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, |
| { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .fgt = FGT_DCCVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, |
| .fgt = FGT_DCCSW, |
| .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, |
| { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .fgt = FGT_DCCVAU, |
| .accessfn = access_tocu }, |
| { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .fgt = FGT_DCCIVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, |
| .fgt = FGT_DCCISW, |
| .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, |
| /* TLBI operations */ |
| { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVMALLE1IS, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAE1IS, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIASIDE1IS, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAAE1IS, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVALE1IS, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAALE1IS, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVMALLE1, |
| .writefn = tlbi_aa64_vmalle1_write }, |
| { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAE1, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIASIDE1, |
| .writefn = tlbi_aa64_vmalle1_write }, |
| { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAAE1, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVALE1, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAALE1, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ipas2e1is_write }, |
| { .name = "TLBI_IPAS2LE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ipas2e1is_write }, |
| { .name = "TLBI_ALLE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_VMALLS12E1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_IPAS2E1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ipas2e1_write }, |
| { .name = "TLBI_IPAS2LE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ipas2e1_write }, |
| { .name = "TLBI_ALLE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1_write }, |
| { .name = "TLBI_VMALLS12E1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| #ifndef CONFIG_USER_ONLY |
| /* 64 bit address translation operations */ |
| { .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .fgt = FGT_ATS1E1R, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .fgt = FGT_ATS1E1W, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E0R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 2, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .fgt = FGT_ATS1E0R, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E0W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 3, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .fgt = FGT_ATS1E0W, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E1R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E1W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E0R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E0W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 7, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| /* AT S1E2* are elsewhere as they UNDEF from EL3 if EL2 is not present */ |
| { .name = "AT_S1E3R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E3W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "PAR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 0, .crn = 7, .crm = 4, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, |
| .fgt = FGT_PAR_EL1, |
| .fieldoffset = offsetof(CPUARMState, cp15.par_el[1]), |
| .writefn = par_write }, |
| #endif |
| /* TLB invalidate last level of translation table walk */ |
| { .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlbis, |
| .writefn = tlbimva_is_write }, |
| { .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlbis, |
| .writefn = tlbimvaa_is_write }, |
| { .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "TLBIMVAAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimvaa_write }, |
| { .name = "TLBIMVALH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_write }, |
| { .name = "TLBIMVALHIS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_is_write }, |
| { .name = "TLBIIPAS2", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiipas2_hyp_write }, |
| { .name = "TLBIIPAS2IS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiipas2is_hyp_write }, |
| { .name = "TLBIIPAS2L", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiipas2_hyp_write }, |
| { .name = "TLBIIPAS2LIS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiipas2is_hyp_write }, |
| /* 32 bit cache operations */ |
| { .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_ticab }, |
| { .name = "BPIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 6, |
| .type = ARM_CP_NOP, .access = PL1_W }, |
| { .name = "ICIALLU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tocu }, |
| { .name = "ICIMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tocu }, |
| { .name = "BPIALL", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 6, |
| .type = ARM_CP_NOP, .access = PL1_W }, |
| { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, |
| .type = ARM_CP_NOP, .access = PL1_W }, |
| { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tocu }, |
| { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| /* MMU Domain access control / MPU write buffer control */ |
| { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .writefn = dacr_write, .raw_writefn = raw_write, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), |
| offsetoflow32(CPUARMState, cp15.dacr_ns) } }, |
| { .name = "ELR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, elr_el[1]) }, |
| { .name = "SPSR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) }, |
| /* |
| * We rely on the access checks not allowing the guest to write to the |
| * state field when SPSel indicates that it's being used as the stack |
| * pointer. |
| */ |
| { .name = "SP_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = sp_el0_access, |
| .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, sp_el[0]) }, |
| { .name = "SP_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_KEEP, |
| .fieldoffset = offsetof(CPUARMState, sp_el[1]) }, |
| { .name = "SPSel", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, |
| .access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write }, |
| { .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0, |
| .access = PL2_RW, |
| .type = ARM_CP_ALIAS | ARM_CP_FPU | ARM_CP_EL3_NO_EL2_KEEP, |
| .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]) }, |
| { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, |
| .writefn = dacr_write, .raw_writefn = raw_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) }, |
| { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, .resetvalue = 0, .type = ARM_CP_EL3_NO_EL2_KEEP, |
| .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) }, |
| { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 0, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_IRQ]) }, |
| { .name = "SPSR_ABT", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_ABT]) }, |
| { .name = "SPSR_UND", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 2, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_UND]) }, |
| { .name = "SPSR_FIQ", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 3, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_FIQ]) }, |
| { .name = "MDCR_EL3", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 3, .opc2 = 1, |
| .resetvalue = 0, |
| .access = PL3_RW, |
| .writefn = mdcr_el3_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el3) }, |
| { .name = "SDCR", .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_trap_aa32s_el1, |
| .writefn = sdcr_write, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) }, |
| }; |
| |
| static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| valid_mask |= MAKE_64BIT_MASK(0, 34); /* ARMv8.0 */ |
| } else { |
| valid_mask |= MAKE_64BIT_MASK(0, 28); /* ARMv7VE */ |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| valid_mask &= ~HCR_HCD; |
| } else if (cpu->psci_conduit != QEMU_PSCI_CONDUIT_SMC) { |
| /* |
| * Architecturally HCR.TSC is RES0 if EL3 is not implemented. |
| * However, if we're using the SMC PSCI conduit then QEMU is |
| * effectively acting like EL3 firmware and so the guest at |
| * EL2 should retain the ability to prevent EL1 from being |
| * able to make SMC calls into the ersatz firmware, so in |
| * that case HCR.TSC should be read/write. |
| */ |
| valid_mask &= ~HCR_TSC; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_AARCH64)) { |
| if (cpu_isar_feature(aa64_vh, cpu)) { |
| valid_mask |= HCR_E2H; |
| } |
| if (cpu_isar_feature(aa64_ras, cpu)) { |
| valid_mask |= HCR_TERR | HCR_TEA; |
| } |
| if (cpu_isar_feature(aa64_lor, cpu)) { |
| valid_mask |= HCR_TLOR; |
| } |
| if (cpu_isar_feature(aa64_pauth, cpu)) { |
| valid_mask |= HCR_API | HCR_APK; |
| } |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| valid_mask |= HCR_ATA | HCR_DCT | HCR_TID5; |
| } |
| if (cpu_isar_feature(aa64_scxtnum, cpu)) { |
| valid_mask |= HCR_ENSCXT; |
| } |
| if (cpu_isar_feature(aa64_fwb, cpu)) { |
| valid_mask |= HCR_FWB; |
| } |
| } |
| |
| if (cpu_isar_feature(any_evt, cpu)) { |
| valid_mask |= HCR_TTLBIS | HCR_TTLBOS | HCR_TICAB | HCR_TOCU | HCR_TID4; |
| } else if (cpu_isar_feature(any_half_evt, cpu)) { |
| valid_mask |= HCR_TICAB | HCR_TOCU | HCR_TID4; |
| } |
| |
| /* Clear RES0 bits. */ |
| value &= valid_mask; |
| |
| /* |
| * These bits change the MMU setup: |
| * HCR_VM enables stage 2 translation |
| * HCR_PTW forbids certain page-table setups |
| * HCR_DC disables stage1 and enables stage2 translation |
| * HCR_DCT enables tagging on (disabled) stage1 translation |
| * HCR_FWB changes the interpretation of stage2 descriptor bits |
| */ |
| if ((env->cp15.hcr_el2 ^ value) & |
| (HCR_VM | HCR_PTW | HCR_DC | HCR_DCT | HCR_FWB)) { |
| tlb_flush(CPU(cpu)); |
| } |
| env->cp15.hcr_el2 = value; |
| |
| /* |
| * Updates to VI and VF require us to update the status of |
| * virtual interrupts, which are the logical OR of these bits |
| * and the state of the input lines from the GIC. (This requires |
| * that we have the iothread lock, which is done by marking the |
| * reginfo structs as ARM_CP_IO.) |
| * Note that if a write to HCR pends a VIRQ or VFIQ it is never |
| * possible for it to be taken immediately, because VIRQ and |
| * VFIQ are masked unless running at EL0 or EL1, and HCR |
| * can only be written at EL2. |
| */ |
| g_assert(qemu_mutex_iothread_locked()); |
| arm_cpu_update_virq(cpu); |
| arm_cpu_update_vfiq(cpu); |
| arm_cpu_update_vserr(cpu); |
| } |
| |
| static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| do_hcr_write(env, value, 0); |
| } |
| |
| static void hcr_writehigh(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Handle HCR2 write, i.e. write to high half of HCR_EL2 */ |
| value = deposit64(env->cp15.hcr_el2, 32, 32, value); |
| do_hcr_write(env, value, MAKE_64BIT_MASK(0, 32)); |
| } |
| |
| static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Handle HCR write, i.e. write to low half of HCR_EL2 */ |
| value = deposit64(env->cp15.hcr_el2, 0, 32, value); |
| do_hcr_write(env, value, MAKE_64BIT_MASK(32, 32)); |
| } |
| |
| /* |
| * Return the effective value of HCR_EL2, at the given security state. |
| * Bits that are not included here: |
| * RW (read from SCR_EL3.RW as needed) |
| */ |
| uint64_t arm_hcr_el2_eff_secstate(CPUARMState *env, bool secure) |
| { |
| uint64_t ret = env->cp15.hcr_el2; |
| |
| if (!arm_is_el2_enabled_secstate(env, secure)) { |
| /* |
| * "This register has no effect if EL2 is not enabled in the |
| * current Security state". This is ARMv8.4-SecEL2 speak for |
| * !(SCR_EL3.NS==1 || SCR_EL3.EEL2==1). |
| * |
| * Prior to that, the language was "In an implementation that |
| * includes EL3, when the value of SCR_EL3.NS is 0 the PE behaves |
| * as if this field is 0 for all purposes other than a direct |
| * read or write access of HCR_EL2". With lots of enumeration |
| * on a per-field basis. In current QEMU, this is condition |
| * is arm_is_secure_below_el3. |
| * |
| * Since the v8.4 language applies to the entire register, and |
| * appears to be backward compatible, use that. |
| */ |
| return 0; |
| } |
| |
| /* |
| * For a cpu that supports both aarch64 and aarch32, we can set bits |
| * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. |
| * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. |
| */ |
| if (!arm_el_is_aa64(env, 2)) { |
| uint64_t aa32_valid; |
| |
| /* |
| * These bits are up-to-date as of ARMv8.6. |
| * For HCR, it's easiest to list just the 2 bits that are invalid. |
| * For HCR2, list those that are valid. |
| */ |
| aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); |
| aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | |
| HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); |
| ret &= aa32_valid; |
| } |
| |
| if (ret & HCR_TGE) { |
| /* These bits are up-to-date as of ARMv8.6. */ |
| if (ret & HCR_E2H) { |
| ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | |
| HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | |
| HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | |
| HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | |
| HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | |
| HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); |
| } else { |
| ret |= HCR_FMO | HCR_IMO | HCR_AMO; |
| } |
| ret &= ~(HCR_SWIO | HCR_PTW | HCR_VF | HCR_VI | HCR_VSE | |
| HCR_FB | HCR_TID1 | HCR_TID3 | HCR_TSC | HCR_TACR | |
| HCR_TSW | HCR_TTLB | HCR_TVM | HCR_HCD | HCR_TRVM | |
| HCR_TLOR); |
| } |
| |
| return ret; |
| } |
| |
| uint64_t arm_hcr_el2_eff(CPUARMState *env) |
| { |
| return arm_hcr_el2_eff_secstate(env, arm_is_secure_below_el3(env)); |
| } |
| |
| /* |
| * Corresponds to ARM pseudocode function ELIsInHost(). |
| */ |
| bool el_is_in_host(CPUARMState *env, int el) |
| { |
| uint64_t mask; |
| |
| /* |
| * Since we only care about E2H and TGE, we can skip arm_hcr_el2_eff(). |
| * Perform the simplest bit tests first, and validate EL2 afterward. |
| */ |
| if (el & 1) { |
| return false; /* EL1 or EL3 */ |
| } |
| |
| /* |
| * Note that hcr_write() checks isar_feature_aa64_vh(), |
| * aka HaveVirtHostExt(), in allowing HCR_E2H to be set. |
| */ |
| mask = el ? HCR_E2H : HCR_E2H | HCR_TGE; |
| if ((env->cp15.hcr_el2 & mask) != mask) { |
| return false; |
| } |
| |
| /* TGE and/or E2H set: double check those bits are currently legal. */ |
| return arm_is_el2_enabled(env) && arm_el_is_aa64(env, 2); |
| } |
| |
| static void hcrx_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint64_t valid_mask = 0; |
| |
| /* No features adding bits to HCRX are implemented. */ |
| |
| /* Clear RES0 bits. */ |
| env->cp15.hcrx_el2 = value & valid_mask; |
| } |
| |
| static CPAccessResult access_hxen(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) < 3 |
| && arm_feature(env, ARM_FEATURE_EL3) |
| && !(env->cp15.scr_el3 & SCR_HXEN)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo hcrx_el2_reginfo = { |
| .name = "HCRX_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 2, |
| .access = PL2_RW, .writefn = hcrx_write, .accessfn = access_hxen, |
| .fieldoffset = offsetof(CPUARMState, cp15.hcrx_el2), |
| }; |
| |
| /* Return the effective value of HCRX_EL2. */ |
| uint64_t arm_hcrx_el2_eff(CPUARMState *env) |
| { |
| /* |
| * The bits in this register behave as 0 for all purposes other than |
| * direct reads of the register if: |
| * - EL2 is not enabled in the current security state, |
| * - SCR_EL3.HXEn is 0. |
| */ |
| if (!arm_is_el2_enabled(env) |
| || (arm_feature(env, ARM_FEATURE_EL3) |
| && !(env->cp15.scr_el3 & SCR_HXEN))) { |
| return 0; |
| } |
| return env->cp15.hcrx_el2; |
| } |
| |
| static void cptr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * For A-profile AArch32 EL3, if NSACR.CP10 |
| * is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| uint64_t mask = R_HCPTR_TCP11_MASK | R_HCPTR_TCP10_MASK; |
| value = (value & ~mask) | (env->cp15.cptr_el[2] & mask); |
| } |
| env->cp15.cptr_el[2] = value; |
| } |
| |
| static uint64_t cptr_el2_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* |
| * For A-profile AArch32 EL3, if NSACR.CP10 |
| * is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1. |
| */ |
| uint64_t value = env->cp15.cptr_el[2]; |
| |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| value |= R_HCPTR_TCP11_MASK | R_HCPTR_TCP10_MASK; |
| } |
| return value; |
| } |
| |
| static const ARMCPRegInfo el2_cp_reginfo[] = { |
| { .name = "HCR_EL2", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2), |
| .writefn = hcr_write }, |
| { .name = "HCR", .state = ARM_CP_STATE_AA32, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2), |
| .writefn = hcr_writelow }, |
| { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "ELR_EL2", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, elr_el[2]) }, |
| { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[2]) }, |
| { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[2]) }, |
| { .name = "HIFAR", .state = ARM_CP_STATE_AA32, |
| .type = ARM_CP_ALIAS, |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, |
| .fieldoffset = offsetofhigh32(CPUARMState, cp15.far_el[2]) }, |
| { .name = "SPSR_EL2", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_HYP]) }, |
| { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .writefn = vbar_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[2]), |
| .resetvalue = 0 }, |
| { .name = "SP_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 1, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, sp_el[2]) }, |
| { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL2_RW, .accessfn = cptr_access, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.cptr_el[2]), |
| .readfn = cptr_el2_read, .writefn = cptr_el2_write }, |
| { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[2]), |
| .resetvalue = 0 }, |
| { .name = "HMAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetofhigh32(CPUARMState, cp15.mair_el[2]) }, |
| { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| /* HAMAIR1 is mapped to AMAIR_EL2[63:32] */ |
| { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, .writefn = vmsa_tcr_el12_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[2]) }, |
| { .name = "VTCR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, |
| .type = ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.vtcr_el2) }, |
| { .name = "VTCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, |
| .access = PL2_RW, |
| /* no .writefn needed as this can't cause an ASID change */ |
| .fieldoffset = offsetof(CPUARMState, cp15.vtcr_el2) }, |
| { .name = "VTTBR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 6, .crm = 2, |
| .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2), |
| .writefn = vttbr_write }, |
| { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .writefn = vttbr_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2) }, |
| { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .raw_writefn = raw_write, .writefn = sctlr_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[2]) }, |
| { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[2]) }, |
| { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .resetvalue = 0, .writefn = vmsa_tcr_ttbr_el2_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) }, |
| { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2, |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) }, |
| { .name = "TLBIALLNSNH", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 4, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_nsnh_write }, |
| { .name = "TLBIALLNSNHIS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_nsnh_is_write }, |
| { .name = "TLBIALLH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_hyp_write }, |
| { .name = "TLBIALLHIS", .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_hyp_is_write }, |
| { .name = "TLBIMVAH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_write }, |
| { .name = "TLBIMVAHIS", .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_is_write }, |
| { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_alle2_write }, |
| { .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_vae2_write }, |
| { .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_vae2_write }, |
| { .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_alle2is_write }, |
| { .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_vae2is_write }, |
| { .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_vae2is_write }, |
| #ifndef CONFIG_USER_ONLY |
| /* |
| * Unlike the other EL2-related AT operations, these must |
| * UNDEF from EL3 if EL2 is not implemented, which is why we |
| * define them here rather than with the rest of the AT ops. |
| */ |
| { .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL2_W, .accessfn = at_s1e2_access, |
| .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL2_W, .accessfn = at_s1e2_access, |
| .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = ats_write64 }, |
| /* |
| * The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE |
| * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 |
| * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose |
| * to behave as if SCR.NS was 1. |
| */ |
| { .name = "ATS1HR", .cp = 15, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL2_W, |
| .writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, |
| { .name = "ATS1HW", .cp = 15, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL2_W, |
| .writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, |
| { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, |
| /* |
| * ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the |
| * reset values as IMPDEF. We choose to reset to 3 to comply with |
| * both ARMv7 and ARMv8. |
| */ |
| .access = PL2_RW, .resetvalue = 3, |
| .fieldoffset = offsetof(CPUARMState, cp15.cnthctl_el2) }, |
| { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3, |
| .access = PL2_RW, .type = ARM_CP_IO, .resetvalue = 0, |
| .writefn = gt_cntvoff_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) }, |
| { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14, |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS | ARM_CP_IO, |
| .writefn = gt_cntvoff_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) }, |
| { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].cval), |
| .type = ARM_CP_IO, .access = PL2_RW, |
| .writefn = gt_hyp_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].cval), |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_IO, |
| .writefn = gt_hyp_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW, |
| .resetfn = gt_hyp_timer_reset, |
| .readfn = gt_hyp_tval_read, .writefn = gt_hyp_tval_write }, |
| { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].ctl), |
| .resetvalue = 0, |
| .writefn = gt_hyp_ctl_write, .raw_writefn = raw_write }, |
| #endif |
| { .name = "HPFAR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .fieldoffset = offsetof(CPUARMState, cp15.hpfar_el2) }, |
| { .name = "HPFAR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.hpfar_el2) }, |
| { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH, |
| .cp = 15, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.hstr_el2) }, |
| }; |
| |
| static const ARMCPRegInfo el2_v8_cp_reginfo[] = { |
| { .name = "HCR2", .state = ARM_CP_STATE_AA32, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, |
| .access = PL2_RW, |
| .fieldoffset = offsetofhigh32(CPUARMState, cp15.hcr_el2), |
| .writefn = hcr_writehigh }, |
| }; |
| |
| static CPAccessResult sel2_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 3 || arm_is_secure_below_el3(env)) { |
| return CP_ACCESS_OK; |
| } |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| static const ARMCPRegInfo el2_sec_cp_reginfo[] = { |
| { .name = "VSTTBR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 0, |
| .access = PL2_RW, .accessfn = sel2_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.vsttbr_el2) }, |
| { .name = "VSTCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 2, |
| .access = PL2_RW, .accessfn = sel2_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.vstcr_el2) }, |
| }; |
| |
| static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* |
| * The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. |
| * At Secure EL1 it traps to EL3 or EL2. |
| */ |
| if (arm_current_el(env) == 3) { |
| return CP_ACCESS_OK; |
| } |
| if (arm_is_secure_below_el3(env)) { |
| if (env->cp15.scr_el3 & SCR_EEL2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_TRAP_EL3; |
| } |
| /* Accesses from EL1 NS and EL2 NS are UNDEF for write but allow reads. */ |
| if (isread) { |
| return CP_ACCESS_OK; |
| } |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| static const ARMCPRegInfo el3_cp_reginfo[] = { |
| { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3), |
| .resetfn = scr_reset, .writefn = scr_write }, |
| { .name = "SCR", .type = ARM_CP_ALIAS | ARM_CP_NEWEL, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_trap_aa32s_el1, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3), |
| .writefn = scr_write }, |
| { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.sder) }, |
| { .name = "SDER", |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 1, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.sder) }, |
| { .name = "MVBAR", .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_trap_aa32s_el1, |
| .writefn = vbar_write, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.mvbar) }, |
| { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[3]) }, |
| { .name = "TCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 2, .crm = 0, .opc2 = 2, |
| .access = PL3_RW, |
| /* no .writefn needed as this can't cause an ASID change */ |
| .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[3]) }, |
| { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1, |
| .access = PL3_RW, |
| .fieldoffset = offsetof(CPUARMState, elr_el[3]) }, |
| { .name = "ESR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 2, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[3]) }, |
| { .name = "FAR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 6, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[3]) }, |
| { .name = "SPSR_EL3", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_MON]) }, |
| { .name = "VBAR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, .writefn = vbar_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[3]), |
| .resetvalue = 0 }, |
| { .name = "CPTR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL3_RW, .accessfn = cptr_access, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.cptr_el[3]) }, |
| { .name = "TPIDR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 2, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[3]) }, |
| { .name = "AMAIR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 3, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR0_EL3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 1, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR1_EL3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 1, .opc2 = 1, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "TLBI_ALLE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle3is_write }, |
| { .name = "TLBI_VAE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| { .name = "TLBI_VALE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| { .name = "TLBI_ALLE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle3_write }, |
| { .name = "TLBI_VAE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3_write }, |
| { .name = "TLBI_VALE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3_write }, |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| /* Test if system register redirection is to occur in the current state. */ |
| static bool redirect_for_e2h(CPUARMState *env) |
| { |
| return arm_current_el(env) == 2 && (arm_hcr_el2_eff(env) & HCR_E2H); |
| } |
| |
| static uint64_t el2_e2h_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| CPReadFn *readfn; |
| |
| if (redirect_for_e2h(env)) { |
| /* Switch to the saved EL2 version of the register. */ |
| ri = ri->opaque; |
| readfn = ri->readfn; |
| } else { |
| readfn = ri->orig_readfn; |
| } |
| if (readfn == NULL) { |
| readfn = raw_read; |
| } |
| return readfn(env, ri); |
| } |
| |
| static void el2_e2h_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPWriteFn *writefn; |
| |
| if (redirect_for_e2h(env)) { |
| /* Switch to the saved EL2 version of the register. */ |
| ri = ri->opaque; |
| writefn = ri->writefn; |
| } else { |
| writefn = ri->orig_writefn; |
| } |
| if (writefn == NULL) { |
| writefn = raw_write; |
| } |
| writefn(env, ri, value); |
| } |
| |
| static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) |
| { |
| struct E2HAlias { |
| uint32_t src_key, dst_key, new_key; |
| const char *src_name, *dst_name, *new_name; |
| bool (*feature)(const ARMISARegisters *id); |
| }; |
| |
| #define K(op0, op1, crn, crm, op2) \ |
| ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2) |
| |
| static const struct E2HAlias aliases[] = { |
| { K(3, 0, 1, 0, 0), K(3, 4, 1, 0, 0), K(3, 5, 1, 0, 0), |
| "SCTLR", "SCTLR_EL2", "SCTLR_EL12" }, |
| { K(3, 0, 1, 0, 2), K(3, 4, 1, 1, 2), K(3, 5, 1, 0, 2), |
| "CPACR", "CPTR_EL2", "CPACR_EL12" }, |
| { K(3, 0, 2, 0, 0), K(3, 4, 2, 0, 0), K(3, 5, 2, 0, 0), |
| "TTBR0_EL1", "TTBR0_EL2", "TTBR0_EL12" }, |
| { K(3, 0, 2, 0, 1), K(3, 4, 2, 0, 1), K(3, 5, 2, 0, 1), |
| "TTBR1_EL1", "TTBR1_EL2", "TTBR1_EL12" }, |
| { K(3, 0, 2, 0, 2), K(3, 4, 2, 0, 2), K(3, 5, 2, 0, 2), |
| "TCR_EL1", "TCR_EL2", "TCR_EL12" }, |
| { K(3, 0, 4, 0, 0), K(3, 4, 4, 0, 0), K(3, 5, 4, 0, 0), |
| "SPSR_EL1", "SPSR_EL2", "SPSR_EL12" }, |
| { K(3, 0, 4, 0, 1), K(3, 4, 4, 0, 1), K(3, 5, 4, 0, 1), |
| "ELR_EL1", "ELR_EL2", "ELR_EL12" }, |
| { K(3, 0, 5, 1, 0), K(3, 4, 5, 1, 0), K(3, 5, 5, 1, 0), |
| "AFSR0_EL1", "AFSR0_EL2", "AFSR0_EL12" }, |
| { K(3, 0, 5, 1, 1), K(3, 4, 5, 1, 1), K(3, 5, 5, 1, 1), |
| "AFSR1_EL1", "AFSR1_EL2", "AFSR1_EL12" }, |
| { K(3, 0, 5, 2, 0), K(3, 4, 5, 2, 0), K(3, 5, 5, 2, 0), |
| "ESR_EL1", "ESR_EL2", "ESR_EL12" }, |
| { K(3, 0, 6, 0, 0), K(3, 4, 6, 0, 0), K(3, 5, 6, 0, 0), |
| "FAR_EL1", "FAR_EL2", "FAR_EL12" }, |
| { K(3, 0, 10, 2, 0), K(3, 4, 10, 2, 0), K(3, 5, 10, 2, 0), |
| "MAIR_EL1", "MAIR_EL2", "MAIR_EL12" }, |
| { K(3, 0, 10, 3, 0), K(3, 4, 10, 3, 0), K(3, 5, 10, 3, 0), |
| "AMAIR0", "AMAIR_EL2", "AMAIR_EL12" }, |
| { K(3, 0, 12, 0, 0), K(3, 4, 12, 0, 0), K(3, 5, 12, 0, 0), |
| "VBAR", "VBAR_EL2", "VBAR_EL12" }, |
| { K(3, 0, 13, 0, 1), K(3, 4, 13, 0, 1), K(3, 5, 13, 0, 1), |
| "CONTEXTIDR_EL1", "CONTEXTIDR_EL2", "CONTEXTIDR_EL12" }, |
| { K(3, 0, 14, 1, 0), K(3, 4, 14, 1, 0), K(3, 5, 14, 1, 0), |
| "CNTKCTL", "CNTHCTL_EL2", "CNTKCTL_EL12" }, |
| |
| /* |
| * Note that redirection of ZCR is mentioned in the description |
| * of ZCR_EL2, and aliasing in the description of ZCR_EL1, but |
| * not in the summary table. |
| */ |
| { K(3, 0, 1, 2, 0), K(3, 4, 1, 2, 0), K(3, 5, 1, 2, 0), |
| "ZCR_EL1", "ZCR_EL2", "ZCR_EL12", isar_feature_aa64_sve }, |
| { K(3, 0, 1, 2, 6), K(3, 4, 1, 2, 6), K(3, 5, 1, 2, 6), |
| "SMCR_EL1", "SMCR_EL2", "SMCR_EL12", isar_feature_aa64_sme }, |
| |
| { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0), |
| "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte }, |
| |
| { K(3, 0, 13, 0, 7), K(3, 4, 13, 0, 7), K(3, 5, 13, 0, 7), |
| "SCXTNUM_EL1", "SCXTNUM_EL2", "SCXTNUM_EL12", |
| isar_feature_aa64_scxtnum }, |
| |
| /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */ |
| /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */ |
| }; |
| #undef K |
| |
| size_t i; |
| |
| for (i = 0; i < ARRAY_SIZE(aliases); i++) { |
| const struct E2HAlias *a = &aliases[i]; |
| ARMCPRegInfo *src_reg, *dst_reg, *new_reg; |
| bool ok; |
| |
| if (a->feature && !a->feature(&cpu->isar)) { |
| continue; |
| } |
| |
| src_reg = g_hash_table_lookup(cpu->cp_regs, |
| (gpointer)(uintptr_t)a->src_key); |
| dst_reg = g_hash_table_lookup(cpu->cp_regs, |
| (gpointer)(uintptr_t)a->dst_key); |
| g_assert(src_reg != NULL); |
| g_assert(dst_reg != NULL); |
| |
| /* Cross-compare names to detect typos in the keys. */ |
| g_assert(strcmp(src_reg->name, a->src_name) == 0); |
| g_assert(strcmp(dst_reg->name, a->dst_name) == 0); |
| |
| /* None of the core system registers use opaque; we will. */ |
| g_assert(src_reg->opaque == NULL); |
| |
| /* Create alias before redirection so we dup the right data. */ |
| new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo)); |
| |
| new_reg->name = a->new_name; |
| new_reg->type |= ARM_CP_ALIAS; |
| /* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */ |
| new_reg->access &= PL2_RW | PL3_RW; |
| |
| ok = g_hash_table_insert(cpu->cp_regs, |
| (gpointer)(uintptr_t)a->new_key, new_reg); |
| g_assert(ok); |
| |
| src_reg->opaque = dst_reg; |
| src_reg->orig_readfn = src_reg->readfn ?: raw_read; |
| src_reg->orig_writefn = src_reg->writefn ?: raw_write; |
| if (!src_reg->raw_readfn) { |
| src_reg->raw_readfn = raw_read; |
| } |
| if (!src_reg->raw_writefn) { |
| src_reg->raw_writefn = raw_write; |
| } |
| src_reg->readfn = el2_e2h_read; |
| src_reg->writefn = el2_e2h_write; |
| } |
| } |
| #endif |
| |
| static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int cur_el = arm_current_el(env); |
| |
| if (cur_el < 2) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| if (cur_el == 0) { |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| if (!(env->cp15.sctlr_el[2] & SCTLR_UCT)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| if (!(env->cp15.sctlr_el[1] & SCTLR_UCT)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (hcr & HCR_TID2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| } else if (hcr & HCR_TID2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| |
| if (arm_current_el(env) < 2 && arm_hcr_el2_eff(env) & HCR_TID2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| /* |
| * Check for traps to RAS registers, which are controlled |
| * by HCR_EL2.TERR and SCR_EL3.TERR. |
| */ |
| static CPAccessResult access_terr(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TERR)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.scr_el3 & SCR_TERR)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t disr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { |
| return env->cp15.vdisr_el2; |
| } |
| if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { |
| return 0; /* RAZ/WI */ |
| } |
| return env->cp15.disr_el1; |
| } |
| |
| static void disr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && (arm_hcr_el2_eff(env) & HCR_AMO)) { |
| env->cp15.vdisr_el2 = val; |
| return; |
| } |
| if (el < 3 && (env->cp15.scr_el3 & SCR_EA)) { |
| return; /* RAZ/WI */ |
| } |
| env->cp15.disr_el1 = val; |
| } |
| |
| /* |
| * Minimal RAS implementation with no Error Records. |
| * Which means that all of the Error Record registers: |
| * ERXADDR_EL1 |
| * ERXCTLR_EL1 |
| * ERXFR_EL1 |
| * ERXMISC0_EL1 |
| * ERXMISC1_EL1 |
| * ERXMISC2_EL1 |
| * ERXMISC3_EL1 |
| * ERXPFGCDN_EL1 (RASv1p1) |
| * ERXPFGCTL_EL1 (RASv1p1) |
| * ERXPFGF_EL1 (RASv1p1) |
| * ERXSTATUS_EL1 |
| * and |
| * ERRSELR_EL1 |
| * may generate UNDEFINED, which is the effect we get by not |
| * listing them at all. |
| * |
| * These registers have fine-grained trap bits, but UNDEF-to-EL1 |
| * is higher priority than FGT-to-EL2 so we do not need to list them |
| * in order to check for an FGT. |
| */ |
| static const ARMCPRegInfo minimal_ras_reginfo[] = { |
| { .name = "DISR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 1, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.disr_el1), |
| .readfn = disr_read, .writefn = disr_write, .raw_writefn = raw_write }, |
| { .name = "ERRIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 3, .opc2 = 0, |
| .access = PL1_R, .accessfn = access_terr, |
| .fgt = FGT_ERRIDR_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vdisr_el2) }, |
| { .name = "VSESR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 3, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vsesr_el2) }, |
| }; |
| |
| /* |
| * Return the exception level to which exceptions should be taken |
| * via SVEAccessTrap. This excludes the check for whether the exception |
| * should be routed through AArch64.AdvSIMDFPAccessTrap. That can easily |
| * be found by testing 0 < fp_exception_el < sve_exception_el. |
| * |
| * C.f. the ARM pseudocode function CheckSVEEnabled. Note that the |
| * pseudocode does *not* separate out the FP trap checks, but has them |
| * all in one function. |
| */ |
| int sve_exception_el(CPUARMState *env, int el) |
| { |
| #ifndef CONFIG_USER_ONLY |
| if (el <= 1 && !el_is_in_host(env, el)) { |
| switch (FIELD_EX64(env->cp15.cpacr_el1, CPACR_EL1, ZEN)) { |
| case 1: |
| if (el != 0) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 1; |
| } |
| } |
| |
| if (el <= 2 && arm_is_el2_enabled(env)) { |
| /* CPTR_EL2 changes format with HCR_EL2.E2H (regardless of TGE). */ |
| if (env->cp15.hcr_el2 & HCR_E2H) { |
| switch (FIELD_EX64(env->cp15.cptr_el[2], CPTR_EL2, ZEN)) { |
| case 1: |
| if (el != 0 || !(env->cp15.hcr_el2 & HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 2; |
| } |
| } else { |
| if (FIELD_EX64(env->cp15.cptr_el[2], CPTR_EL2, TZ)) { |
| return 2; |
| } |
| } |
| } |
| |
| /* CPTR_EL3. Since EZ is negative we must check for EL3. */ |
| if (arm_feature(env, ARM_FEATURE_EL3) |
| && !FIELD_EX64(env->cp15.cptr_el[3], CPTR_EL3, EZ)) { |
| return 3; |
| } |
| #endif |
| return 0; |
| } |
| |
| /* |
| * Return the exception level to which exceptions should be taken for SME. |
| * C.f. the ARM pseudocode function CheckSMEAccess. |
| */ |
| int sme_exception_el(CPUARMState *env, int el) |
| { |
| #ifndef CONFIG_USER_ONLY |
| if (el <= 1 && !el_is_in_host(env, el)) { |
| switch (FIELD_EX64(env->cp15.cpacr_el1, CPACR_EL1, SMEN)) { |
| case 1: |
| if (el != 0) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 1; |
| } |
| } |
| |
| if (el <= 2 && arm_is_el2_enabled(env)) { |
| /* CPTR_EL2 changes format with HCR_EL2.E2H (regardless of TGE). */ |
| if (env->cp15.hcr_el2 & HCR_E2H) { |
| switch (FIELD_EX64(env->cp15.cptr_el[2], CPTR_EL2, SMEN)) { |
| case 1: |
| if (el != 0 || !(env->cp15.hcr_el2 & HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 2; |
| } |
| } else { |
| if (FIELD_EX64(env->cp15.cptr_el[2], CPTR_EL2, TSM)) { |
| return 2; |
| } |
| } |
| } |
| |
| /* CPTR_EL3. Since ESM is negative we must check for EL3. */ |
| if (arm_feature(env, ARM_FEATURE_EL3) |
| && !FIELD_EX64(env->cp15.cptr_el[3], CPTR_EL3, ESM)) { |
| return 3; |
| } |
| #endif |
| return 0; |
| } |
| |
| /* This corresponds to the ARM pseudocode function IsFullA64Enabled(). */ |
| static bool sme_fa64(CPUARMState *env, int el) |
| { |
| if (!cpu_isar_feature(aa64_sme_fa64, env_archcpu(env))) { |
| return false; |
| } |
| |
| if (el <= 1 && !el_is_in_host(env, el)) { |
| if (!FIELD_EX64(env->vfp.smcr_el[1], SMCR, FA64)) { |
| return false; |
| } |
| } |
| if (el <= 2 && arm_is_el2_enabled(env)) { |
| if (!FIELD_EX64(env->vfp.smcr_el[2], SMCR, FA64)) { |
| return false; |
| } |
| } |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| if (!FIELD_EX64(env->vfp.smcr_el[3], SMCR, FA64)) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Given that SVE is enabled, return the vector length for EL. |
| */ |
| uint32_t sve_vqm1_for_el_sm(CPUARMState *env, int el, bool sm) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t *cr = env->vfp.zcr_el; |
| uint32_t map = cpu->sve_vq.map; |
| uint32_t len = ARM_MAX_VQ - 1; |
| |
| if (sm) { |
| cr = env->vfp.smcr_el; |
| map = cpu->sme_vq.map; |
| } |
| |
| if (el <= 1 && !el_is_in_host(env, el)) { |
| len = MIN(len, 0xf & (uint32_t)cr[1]); |
| } |
| if (el <= 2 && arm_feature(env, ARM_FEATURE_EL2)) { |
| len = MIN(len, 0xf & (uint32_t)cr[2]); |
| } |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| len = MIN(len, 0xf & (uint32_t)cr[3]); |
| } |
| |
| map &= MAKE_64BIT_MASK(0, len + 1); |
| if (map != 0) { |
| return 31 - clz32(map); |
| } |
| |
| /* Bit 0 is always set for Normal SVE -- not so for Streaming SVE. */ |
| assert(sm); |
| return ctz32(cpu->sme_vq.map); |
| } |
| |
| uint32_t sve_vqm1_for_el(CPUARMState *env, int el) |
| { |
| return sve_vqm1_for_el_sm(env, el, FIELD_EX64(env->svcr, SVCR, SM)); |
| } |
| |
| static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int cur_el = arm_current_el(env); |
| int old_len = sve_vqm1_for_el(env, cur_el); |
| int new_len; |
| |
| /* Bits other than [3:0] are RAZ/WI. */ |
| QEMU_BUILD_BUG_ON(ARM_MAX_VQ > 16); |
| raw_write(env, ri, value & 0xf); |
| |
| /* |
| * Because we arrived here, we know both FP and SVE are enabled; |
| * otherwise we would have trapped access to the ZCR_ELn register. |
| */ |
| new_len = sve_vqm1_for_el(env, cur_el); |
| if (new_len < old_len) { |
| aarch64_sve_narrow_vq(env, new_len + 1); |
| } |
| } |
| |
| static const ARMCPRegInfo zcr_reginfo[] = { |
| { .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_SVE, |
| .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), |
| .writefn = zcr_write, .raw_writefn = raw_write }, |
| { .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_SVE, |
| .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), |
| .writefn = zcr_write, .raw_writefn = raw_write }, |
| { .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_SVE, |
| .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), |
| .writefn = zcr_write, .raw_writefn = raw_write }, |
| }; |
| |
| #ifdef TARGET_AARCH64 |
| static CPAccessResult access_tpidr2(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el == 0) { |
| uint64_t sctlr = arm_sctlr(env, el); |
| if (!(sctlr & SCTLR_EnTP2)) { |
| return CP_ACCESS_TRAP; |
| } |
| } |
| /* TODO: FEAT_FGT */ |
| if (el < 3 |
| && arm_feature(env, ARM_FEATURE_EL3) |
| && !(env->cp15.scr_el3 & SCR_ENTP2)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_esm(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* TODO: FEAT_FGT for SMPRI_EL1 but not SMPRIMAP_EL2 */ |
| if (arm_current_el(env) < 3 |
| && arm_feature(env, ARM_FEATURE_EL3) |
| && !FIELD_EX64(env->cp15.cptr_el[3], CPTR_EL3, ESM)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* ResetSVEState */ |
| static void arm_reset_sve_state(CPUARMState *env) |
| { |
| memset(env->vfp.zregs, 0, sizeof(env->vfp.zregs)); |
| /* Recall that FFR is stored as pregs[16]. */ |
| memset(env->vfp.pregs, 0, sizeof(env->vfp.pregs)); |
| vfp_set_fpcr(env, 0x0800009f); |
| } |
| |
| void aarch64_set_svcr(CPUARMState *env, uint64_t new, uint64_t mask) |
| { |
| uint64_t change = (env->svcr ^ new) & mask; |
| |
| if (change == 0) { |
| return; |
| } |
| env->svcr ^= change; |
| |
| if (change & R_SVCR_SM_MASK) { |
| arm_reset_sve_state(env); |
| } |
| |
| /* |
| * ResetSMEState. |
| * |
| * SetPSTATE_ZA zeros on enable and disable. We can zero this only |
| * on enable: while disabled, the storage is inaccessible and the |
| * value does not matter. We're not saving the storage in vmstate |
| * when disabled either. |
| */ |
| if (change & new & R_SVCR_ZA_MASK) { |
| memset(env->zarray, 0, sizeof(env->zarray)); |
| } |
| |
| arm_rebuild_hflags(env); |
| } |
| |
| static void svcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| aarch64_set_svcr(env, value, -1); |
| } |
| |
| static void smcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int cur_el = arm_current_el(env); |
| int old_len = sve_vqm1_for_el(env, cur_el); |
| int new_len; |
| |
| QEMU_BUILD_BUG_ON(ARM_MAX_VQ > R_SMCR_LEN_MASK + 1); |
| value &= R_SMCR_LEN_MASK | R_SMCR_FA64_MASK; |
| raw_write(env, ri, value); |
| |
| /* |
| * Note that it is CONSTRAINED UNPREDICTABLE what happens to ZA storage |
| * when SVL is widened (old values kept, or zeros). Choose to keep the |
| * current values for simplicity. But for QEMU internals, we must still |
| * apply the narrower SVL to the Zregs and Pregs -- see the comment |
| * above aarch64_sve_narrow_vq. |
| */ |
| new_len = sve_vqm1_for_el(env, cur_el); |
| if (new_len < old_len) { |
| aarch64_sve_narrow_vq(env, new_len + 1); |
| } |
| } |
| |
| static const ARMCPRegInfo sme_reginfo[] = { |
| { .name = "TPIDR2_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 5, |
| .access = PL0_RW, .accessfn = access_tpidr2, |
| .fgt = FGT_NTPIDR2_EL0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr2_el0) }, |
| { .name = "SVCR", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 2, |
| .access = PL0_RW, .type = ARM_CP_SME, |
| .fieldoffset = offsetof(CPUARMState, svcr), |
| .writefn = svcr_write, .raw_writefn = raw_write }, |
| { .name = "SMCR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 6, |
| .access = PL1_RW, .type = ARM_CP_SME, |
| .fieldoffset = offsetof(CPUARMState, vfp.smcr_el[1]), |
| .writefn = smcr_write, .raw_writefn = raw_write }, |
| { .name = "SMCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 6, |
| .access = PL2_RW, .type = ARM_CP_SME, |
| .fieldoffset = offsetof(CPUARMState, vfp.smcr_el[2]), |
| .writefn = smcr_write, .raw_writefn = raw_write }, |
| { .name = "SMCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 6, |
| .access = PL3_RW, .type = ARM_CP_SME, |
| .fieldoffset = offsetof(CPUARMState, vfp.smcr_el[3]), |
| .writefn = smcr_write, .raw_writefn = raw_write }, |
| { .name = "SMIDR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 6, |
| .access = PL1_R, .accessfn = access_aa64_tid1, |
| /* |
| * IMPLEMENTOR = 0 (software) |
| * REVISION = 0 (implementation defined) |
| * SMPS = 0 (no streaming execution priority in QEMU) |
| * AFFINITY = 0 (streaming sve mode not shared with other PEs) |
| */ |
| .type = ARM_CP_CONST, .resetvalue = 0, }, |
| /* |
| * Because SMIDR_EL1.SMPS is 0, SMPRI_EL1 and SMPRIMAP_EL2 are RES 0. |
| */ |
| { .name = "SMPRI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 4, |
| .access = PL1_RW, .accessfn = access_esm, |
| .fgt = FGT_NSMPRI_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "SMPRIMAP_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 5, |
| .access = PL2_RW, .accessfn = access_esm, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| }; |
| #endif /* TARGET_AARCH64 */ |
| |
| static void define_pmu_regs(ARMCPU *cpu) |
| { |
| /* |
| * v7 performance monitor control register: same implementor |
| * field as main ID register, and we implement four counters in |
| * addition to the cycle count register. |
| */ |
| unsigned int i, pmcrn = pmu_num_counters(&cpu->env); |
| ARMCPRegInfo pmcr = { |
| .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0, |
| .access = PL0_RW, |
| .fgt = FGT_PMCR_EL0, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcr), |
| .accessfn = pmreg_access, .writefn = pmcr_write, |
| .raw_writefn = raw_write, |
| }; |
| ARMCPRegInfo pmcr64 = { |
| .name = "PMCR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 0, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMCR_EL0, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr), |
| .resetvalue = cpu->isar.reset_pmcr_el0, |
| .writefn = pmcr_write, .raw_writefn = raw_write, |
| }; |
| |
| define_one_arm_cp_reg(cpu, &pmcr); |
| define_one_arm_cp_reg(cpu, &pmcr64); |
| for (i = 0; i < pmcrn; i++) { |
| char *pmevcntr_name = g_strdup_printf("PMEVCNTR%d", i); |
| char *pmevcntr_el0_name = g_strdup_printf("PMEVCNTR%d_EL0", i); |
| char *pmevtyper_name = g_strdup_printf("PMEVTYPER%d", i); |
| char *pmevtyper_el0_name = g_strdup_printf("PMEVTYPER%d_EL0", i); |
| ARMCPRegInfo pmev_regs[] = { |
| { .name = pmevcntr_name, .cp = 15, .crn = 14, |
| .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, |
| .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fgt = FGT_PMEVCNTRN_EL0, |
| .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, |
| .accessfn = pmreg_access_xevcntr }, |
| { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 8 | (3 & (i >> 3)), |
| .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access_xevcntr, |
| .type = ARM_CP_IO, |
| .fgt = FGT_PMEVCNTRN_EL0, |
| .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, |
| .raw_readfn = pmevcntr_rawread, |
| .raw_writefn = pmevcntr_rawwrite }, |
| { .name = pmevtyper_name, .cp = 15, .crn = 14, |
| .crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, |
| .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fgt = FGT_PMEVTYPERN_EL0, |
| .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, |
| .accessfn = pmreg_access }, |
| { .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 12 | (3 & (i >> 3)), |
| .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access, |
| .fgt = FGT_PMEVTYPERN_EL0, |
| .type = ARM_CP_IO, |
| .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, |
| .raw_writefn = pmevtyper_rawwrite }, |
| }; |
| define_arm_cp_regs(cpu, pmev_regs); |
| g_free(pmevcntr_name); |
| g_free(pmevcntr_el0_name); |
| g_free(pmevtyper_name); |
| g_free(pmevtyper_el0_name); |
| } |
| if (cpu_isar_feature(aa32_pmuv3p1, cpu)) { |
| ARMCPRegInfo v81_pmu_regs[] = { |
| { .name = "PMCEID2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .fgt = FGT_PMCEIDN_EL0, |
| .resetvalue = extract64(cpu->pmceid0, 32, 32) }, |
| { .name = "PMCEID3", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .fgt = FGT_PMCEIDN_EL0, |
| .resetvalue = extract64(cpu->pmceid1, 32, 32) }, |
| }; |
| define_arm_cp_regs(cpu, v81_pmu_regs); |
| } |
| if (cpu_isar_feature(any_pmuv3p4, cpu)) { |
| static const ARMCPRegInfo v84_pmmir = { |
| .name = "PMMIR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 6, |
| .access = PL1_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .fgt = FGT_PMMIR_EL1, |
| .resetvalue = 0 |
| }; |
| define_one_arm_cp_reg(cpu, &v84_pmmir); |
| } |
| } |
| |
| /* |
| * We don't know until after realize whether there's a GICv3 |
| * attached, and that is what registers the gicv3 sysregs. |
| * So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1 |
| * at runtime. |
| */ |
| static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t pfr1 = cpu->isar.id_pfr1; |
| |
| if (env->gicv3state) { |
| pfr1 |= 1 << 28; |
| } |
| return pfr1; |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t pfr0 = cpu->isar.id_aa64pfr0; |
| |
| if (env->gicv3state) { |
| pfr0 |= 1 << 24; |
| } |
| return pfr0; |
| } |
| #endif |
| |
| /* |
| * Shared logic between LORID and the rest of the LOR* registers. |
| * Secure state exclusion has already been dealt with. |
| */ |
| static CPAccessResult access_lor_ns(CPUARMState *env, |
| const ARMCPRegInfo *ri, bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TLOR)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.scr_el3 & SCR_TLOR)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_lor_other(CPUARMState *env, |
| const ARMCPRegInfo *ri, bool isread) |
| { |
| if (arm_is_secure_below_el3(env)) { |
| /* Access denied in secure mode. */ |
| return CP_ACCESS_TRAP; |
| } |
| return access_lor_ns(env, ri, isread); |
| } |
| |
| /* |
| * A trivial implementation of ARMv8.1-LOR leaves all of these |
| * registers fixed at 0, which indicates that there are zero |
| * supported Limited Ordering regions. |
| */ |
| static const ARMCPRegInfo lor_reginfo[] = { |
| { .name = "LORSA_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .fgt = FGT_LORSA_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LOREA_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .fgt = FGT_LOREA_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LORN_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .fgt = FGT_LORN_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LORC_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .fgt = FGT_LORC_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LORID_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 7, |
| .access = PL1_R, .accessfn = access_lor_ns, |
| .fgt = FGT_LORID_EL1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| }; |
| |
| #ifdef TARGET_AARCH64 |
| static CPAccessResult access_pauth(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && |
| arm_is_el2_enabled(env) && |
| !(arm_hcr_el2_eff(env) & HCR_APK)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && |
| arm_feature(env, ARM_FEATURE_EL3) && |
| !(env->cp15.scr_el3 & SCR_APK)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo pauth_reginfo[] = { |
| { .name = "APDAKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APDAKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apda.lo) }, |
| { .name = "APDAKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APDAKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apda.hi) }, |
| { .name = "APDBKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APDBKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apdb.lo) }, |
| { .name = "APDBKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APDBKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apdb.hi) }, |
| { .name = "APGAKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APGAKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apga.lo) }, |
| { .name = "APGAKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APGAKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apga.hi) }, |
| { .name = "APIAKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APIAKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apia.lo) }, |
| { .name = "APIAKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APIAKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apia.hi) }, |
| { .name = "APIBKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APIBKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apib.lo) }, |
| { .name = "APIBKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fgt = FGT_APIBKEY, |
| .fieldoffset = offsetof(CPUARMState, keys.apib.hi) }, |
| }; |
| |
| static const ARMCPRegInfo tlbirange_reginfo[] = { |
| { .name = "TLBI_RVAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 1, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAE1IS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAAE1IS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVALE1IS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlbis, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAALE1IS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAE1OS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAAE1OS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVALE1OS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAALE1OS, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAE1, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RVAAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAAE1, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RVALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVALE1, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RVAALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIRVAALE1, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RIPAS2E1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 2, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ripas2e1is_write }, |
| { .name = "TLBI_RIPAS2LE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ripas2e1is_write }, |
| { .name = "TLBI_RVAE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RVALE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RIPAS2E1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 2, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ripas2e1_write }, |
| { .name = "TLBI_RIPAS2LE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_ripas2e1_write }, |
| { .name = "TLBI_RVAE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RVALE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RVAE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_rvae2_write }, |
| { .name = "TLBI_RVALE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_rvae2_write }, |
| { .name = "TLBI_RVAE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVALE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVAE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 5, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVALE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 5, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVAE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 6, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3_write }, |
| { .name = "TLBI_RVALE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 6, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3_write }, |
| }; |
| |
| static const ARMCPRegInfo tlbios_reginfo[] = { |
| { .name = "TLBI_VMALLE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 0, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVMALLE1OS, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 1, |
| .fgt = FGT_TLBIVAE1OS, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_ASIDE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIASIDE1OS, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAAE1OS, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVALE1OS, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VAALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlbos, .type = ARM_CP_NO_RAW, |
| .fgt = FGT_TLBIVAALE1OS, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_alle2is_write }, |
| { .name = "TLBI_VAE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_vae2is_write }, |
| { .name = "TLBI_ALLE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_VALE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_EL3_NO_EL2_UNDEF, |
| .writefn = tlbi_aa64_vae2is_write }, |
| { .name = "TLBI_VMALLS12E1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_IPAS2E1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 0, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RIPAS2E1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 3, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_IPAS2LE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RIPAS2LE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 7, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_ALLE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 1, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle3is_write }, |
| { .name = "TLBI_VAE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 1, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| { .name = "TLBI_VALE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 1, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| }; |
| |
| static uint64_t rndr_readfn(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| Error *err = NULL; |
| uint64_t ret; |
| |
| /* Success sets NZCV = 0000. */ |
| env->NF = env->CF = env->VF = 0, env->ZF = 1; |
| |
| if (qemu_guest_getrandom(&ret, sizeof(ret), &err) < 0) { |
| /* |
| * ??? Failed, for unknown reasons in the crypto subsystem. |
| * The best we can do is log the reason and return the |
| * timed-out indication to the guest. There is no reason |
| * we know to expect this failure to be transitory, so the |
| * guest may well hang retrying the operation. |
| */ |
| qemu_log_mask(LOG_UNIMP, "%s: Crypto failure: %s", |
| ri->name, error_get_pretty(err)); |
| error_free(err); |
| |
| env->ZF = 0; /* NZCF = 0100 */ |
| return 0; |
| } |
| return ret; |
| } |
| |
| /* We do not support re-seeding, so the two registers operate the same. */ |
| static const ARMCPRegInfo rndr_reginfo[] = { |
| { .name = "RNDR", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END | ARM_CP_IO, |
| .opc0 = 3, .opc1 = 3, .crn = 2, .crm = 4, .opc2 = 0, |
| .access = PL0_R, .readfn = rndr_readfn }, |
| { .name = "RNDRRS", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END | ARM_CP_IO, |
| .opc0 = 3, .opc1 = 3, .crn = 2, .crm = 4, .opc2 = 1, |
| .access = PL0_R, .readfn = rndr_readfn }, |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| static void dccvap_writefn(CPUARMState *env, const ARMCPRegInfo *opaque, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| /* CTR_EL0 System register -> DminLine, bits [19:16] */ |
| uint64_t dline_size = 4 << ((cpu->ctr >> 16) & 0xF); |
| uint64_t vaddr_in = (uint64_t) value; |
| uint64_t vaddr = vaddr_in & ~(dline_size - 1); |
| void *haddr; |
| int mem_idx = cpu_mmu_index(env, false); |
| |
| /* This won't be crossing page boundaries */ |
| haddr = probe_read(env, vaddr, dline_size, mem_idx, GETPC()); |
| if (haddr) { |
| |
| ram_addr_t offset; |
| MemoryRegion *mr; |
| |
| /* RCU lock is already being held */ |
| mr = memory_region_from_host(haddr, &offset); |
| |
| if (mr) { |
| memory_region_writeback(mr, offset, dline_size); |
| } |
| } |
| } |
| |
| static const ARMCPRegInfo dcpop_reg[] = { |
| { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, |
| .fgt = FGT_DCCVAP, |
| .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, |
| }; |
| |
| static const ARMCPRegInfo dcpodp_reg[] = { |
| { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, |
| .fgt = FGT_DCCVADP, |
| .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, |
| }; |
| #endif /*CONFIG_USER_ONLY*/ |
| |
| static CPAccessResult access_aa64_tid5(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if ((arm_current_el(env) < 2) && (arm_hcr_el2_eff(env) & HCR_TID5)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_mte(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && arm_is_el2_enabled(env)) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| if (!(hcr & HCR_ATA) && (!(hcr & HCR_E2H) || !(hcr & HCR_TGE))) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| if (el < 3 && |
| arm_feature(env, ARM_FEATURE_EL3) && |
| !(env->cp15.scr_el3 & SCR_ATA)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t tco_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_TCO; |
| } |
| |
| static void tco_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) |
| { |
| env->pstate = (env->pstate & ~PSTATE_TCO) | (val & PSTATE_TCO); |
| } |
| |
| static const ARMCPRegInfo mte_reginfo[] = { |
| { .name = "TFSRE0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 6, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[0]) }, |
| { .name = "TFSR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 6, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[1]) }, |
| { .name = "TFSR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 6, .opc2 = 0, |
| .access = PL2_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[2]) }, |
| { .name = "TFSR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 6, .opc2 = 0, |
| .access = PL3_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[3]) }, |
| { .name = "RGSR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 5, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.rgsr_el1) }, |
| { .name = "GCR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, |
| { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, |
| .access = PL1_R, .accessfn = access_aa64_tid5, |
| .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, |
| { .name = "TCO", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, |
| .type = ARM_CP_NO_RAW, |
| .access = PL0_RW, .readfn = tco_read, .writefn = tco_write }, |
| { .name = "DC_IGVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL1_W, |
| .fgt = FGT_DCIVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_IGSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 4, |
| .fgt = FGT_DCISW, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_IGDVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL1_W, |
| .fgt = FGT_DCIVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_IGDSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 6, |
| .fgt = FGT_DCISW, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CGSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 4, |
| .fgt = FGT_DCCSW, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CGDSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 6, |
| .fgt = FGT_DCCSW, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CIGSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 4, |
| .fgt = FGT_DCCISW, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CIGDSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 6, |
| .fgt = FGT_DCCISW, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| }; |
| |
| static const ARMCPRegInfo mte_tco_ro_reginfo[] = { |
| { .name = "TCO", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, |
| .type = ARM_CP_CONST, .access = PL0_RW, }, |
| }; |
| |
| static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { |
| { .name = "DC_CGVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGDVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGVAP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCVAP, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGDVAP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCVAP, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGVADP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCVADP, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGDVADP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCVADP, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CIGVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCIVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CIGDVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .fgt = FGT_DCCIVAC, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_GVA", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 3, |
| .access = PL0_W, .type = ARM_CP_DC_GVA, |
| #ifndef CONFIG_USER_ONLY |
| /* Avoid overhead of an access check that always passes in user-mode */ |
| .accessfn = aa64_zva_access, |
| .fgt = FGT_DCZVA, |
| #endif |
| }, |
| { .name = "DC_GZVA", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 4, |
| .access = PL0_W, .type = ARM_CP_DC_GZVA, |
| #ifndef CONFIG_USER_ONLY |
| /* Avoid overhead of an access check that always passes in user-mode */ |
| .accessfn = aa64_zva_access, |
| .fgt = FGT_DCZVA, |
| #endif |
| }, |
| }; |
| |
| static CPAccessResult access_scxtnum(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| int el = arm_current_el(env); |
| |
| if (el == 0 && !((hcr & HCR_E2H) && (hcr & HCR_TGE))) { |
| if (env->cp15.sctlr_el[1] & SCTLR_TSCXT) { |
| if (hcr & HCR_TGE) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_TRAP; |
| } |
| } else if (el < 2 && (env->cp15.sctlr_el[2] & SCTLR_TSCXT)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 2 && arm_is_el2_enabled(env) && !(hcr & HCR_ENSCXT)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 |
| && arm_feature(env, ARM_FEATURE_EL3) |
| && !(env->cp15.scr_el3 & SCR_ENSCXT)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo scxtnum_reginfo[] = { |
| { .name = "SCXTNUM_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 13, .crm = 0, .opc2 = 7, |
| .access = PL0_RW, .accessfn = access_scxtnum, |
| .fgt = FGT_SCXTNUM_EL0, |
| .fieldoffset = offsetof(CPUARMState, scxtnum_el[0]) }, |
| { .name = "SCXTNUM_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 7, |
| .access = PL1_RW, .accessfn = access_scxtnum, |
| .fgt = FGT_SCXTNUM_EL1, |
| .fieldoffset = offsetof(CPUARMState, scxtnum_el[1]) }, |
| { .name = "SCXTNUM_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 7, |
| .access = PL2_RW, .accessfn = access_scxtnum, |
| .fieldoffset = offsetof(CPUARMState, scxtnum_el[2]) }, |
| { .name = "SCXTNUM_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 7, |
| .access = PL3_RW, |
| .fieldoffset = offsetof(CPUARMState, scxtnum_el[3]) }, |
| }; |
| |
| static CPAccessResult access_fgt(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 2 && |
| arm_feature(env, ARM_FEATURE_EL3) && !(env->cp15.scr_el3 & SCR_FGTEN)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo fgt_reginfo[] = { |
| { .name = "HFGRTR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, |
| .access = PL2_RW, .accessfn = access_fgt, |
| .fieldoffset = offsetof(CPUARMState, cp15.fgt_read[FGTREG_HFGRTR]) }, |
| { .name = "HFGWTR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 5, |
| .access = PL2_RW, .accessfn = access_fgt, |
| .fieldoffset = offsetof(CPUARMState, cp15.fgt_write[FGTREG_HFGWTR]) }, |
| { .name = "HDFGRTR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 1, .opc2 = 4, |
| .access = PL2_RW, .accessfn = access_fgt, |
| .fieldoffset = offsetof(CPUARMState, cp15.fgt_read[FGTREG_HDFGRTR]) }, |
| { .name = "HDFGWTR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 1, .opc2 = 5, |
| .access = PL2_RW, .accessfn = access_fgt, |
| .fieldoffset = offsetof(CPUARMState, cp15.fgt_write[FGTREG_HDFGWTR]) }, |
| { .name = "HFGITR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 6, |
| .access = PL2_RW, .accessfn = access_fgt, |
| .fieldoffset = offsetof(CPUARMState, cp15.fgt_exec[FGTREG_HFGITR]) }, |
| }; |
| #endif /* TARGET_AARCH64 */ |
| |
| static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el == 0) { |
| uint64_t sctlr = arm_sctlr(env, el); |
| if (!(sctlr & SCTLR_EnRCTX)) { |
| return CP_ACCESS_TRAP; |
| } |
| } else if (el == 1) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| if (hcr & HCR_NV) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo predinv_reginfo[] = { |
| { .name = "CFP_RCTX", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 4, |
| .fgt = FGT_CFPRCTX, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "DVP_RCTX", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 5, |
| .fgt = FGT_DVPRCTX, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "CPP_RCTX", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 7, |
| .fgt = FGT_CPPRCTX, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| /* |
| * Note the AArch32 opcodes have a different OPC1. |
| */ |
| { .name = "CFPRCTX", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 4, |
| .fgt = FGT_CFPRCTX, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "DVPRCTX", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 5, |
| .fgt = FGT_DVPRCTX, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "CPPRCTX", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 7, |
| .fgt = FGT_CPPRCTX, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| }; |
| |
| static uint64_t ccsidr2_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Read the high 32 bits of the current CCSIDR */ |
| return extract64(ccsidr_read(env, ri), 32, 32); |
| } |
| |
| static const ARMCPRegInfo ccsidr2_reginfo[] = { |
| { .name = "CCSIDR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 2, |
| .access = PL1_R, |
| .accessfn = access_tid4, |
| .readfn = ccsidr2_read, .type = ARM_CP_NO_RAW }, |
| }; |
| |
| static CPAccessResult access_aa64_tid3(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if ((arm_current_el(env) < 2) && (arm_hcr_el2_eff(env) & HCR_TID3)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_aa32_tid3(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| return access_aa64_tid3(env, ri, isread); |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_jazelle(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID0)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_joscr_jmcr(CPUARMState *env, |
| const ARMCPRegInfo *ri, bool isread) |
| { |
| /* |
| * HSTR.TJDBX traps JOSCR and JMCR accesses, but it exists only |
| * in v7A, not in v8A. |
| */ |
| if (!arm_feature(env, ARM_FEATURE_V8) && |
| arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) && |
| (env->cp15.hstr_el2 & HSTR_TJDBX)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo jazelle_regs[] = { |
| { .name = "JIDR", |
| .cp = 14, .crn = 0, .crm = 0, .opc1 = 7, .opc2 = 0, |
| .access = PL1_R, .accessfn = access_jazelle, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "JOSCR", |
| .cp = 14, .crn = 1, .crm = 0, .opc1 = 7, .opc2 = 0, |
| .accessfn = access_joscr_jmcr, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "JMCR", |
| .cp = 14, .crn = 2, .crm = 0, .opc1 = 7, .opc2 = 0, |
| .accessfn = access_joscr_jmcr, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| }; |
| |
| static const ARMCPRegInfo contextidr_el2 = { |
| .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) |
| }; |
| |
| static const ARMCPRegInfo vhe_reginfo[] = { |
| { .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el[2]) }, |
| #ifndef CONFIG_USER_ONLY |
| { .name = "CNTHV_CVAL_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 2, |
| .fieldoffset = |
| offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].cval), |
| .type = ARM_CP_IO, .access = PL2_RW, |
| .writefn = gt_hv_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTHV_TVAL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW, |
| .resetfn = gt_hv_timer_reset, |
| .readfn = gt_hv_tval_read, .writefn = gt_hv_tval_write }, |
| { .name = "CNTHV_CTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].ctl), |
| .writefn = gt_hv_ctl_write, .raw_writefn = raw_write }, |
| { .name = "CNTP_CTL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 1, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl), |
| .writefn = gt_phys_ctl_write, .raw_writefn = raw_write }, |
| { .name = "CNTV_CTL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl), |
| .writefn = gt_virt_ctl_write, .raw_writefn = raw_write }, |
| { .name = "CNTP_TVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write }, |
| { .name = "CNTV_TVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .readfn = gt_virt_tval_read, .writefn = gt_virt_tval_write }, |
| { .name = "CNTP_CVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 2, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), |
| .access = PL2_RW, .accessfn = e2h_access, |
| .writefn = gt_phys_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTV_CVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 2, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), |
| .access = PL2_RW, .accessfn = e2h_access, |
| .writefn = gt_virt_cval_write, .raw_writefn = raw_write }, |
| #endif |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| static const ARMCPRegInfo ats1e1_reginfo[] = { |
| { .name = "AT_S1E1RP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .fgt = FGT_ATS1E1RP, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E1WP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .fgt = FGT_ATS1E1WP, |
| .writefn = ats_write64 }, |
| }; |
| |
| static const ARMCPRegInfo ats1cp_reginfo[] = { |
| { .name = "ATS1CPRP", |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write }, |
| { .name = "ATS1CPWP", |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write }, |
| }; |
| #endif |
| |
| /* |
| * ACTLR2 and HACTLR2 map to ACTLR_EL1[63:32] and |
| * ACTLR_EL2[63:32]. They exist only if the ID_MMFR4.AC2 field |
| * is non-zero, which is never for ARMv7, optionally in ARMv8 |
| * and mandatorily for ARMv8.2 and up. |
| * ACTLR2 is banked for S and NS if EL3 is AArch32. Since QEMU's |
| * implementation is RAZ/WI we can ignore this detail, as we |
| * do for ACTLR. |
| */ |
| static const ARMCPRegInfo actlr2_hactlr2_reginfo[] = { |
| { .name = "ACTLR2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_tacr, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "HACTLR2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| }; |
| |
| void register_cp_regs_for_features(ARMCPU *cpu) |
| { |
| /* Register all the coprocessor registers based on feature bits */ |
| CPUARMState *env = &cpu->env; |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| /* M profile has no coprocessor registers */ |
| return; |
| } |
| |
| define_arm_cp_regs(cpu, cp_reginfo); |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| /* |
| * Must go early as it is full of wildcards that may be |
| * overridden by later definitions. |
| */ |
| define_arm_cp_regs(cpu, not_v8_cp_reginfo); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| /* The ID registers all have impdef reset values */ |
| ARMCPRegInfo v6_idregs[] = { |
| { .name = "ID_PFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_pfr0 }, |
| /* |
| * ID_PFR1 is not a plain ARM_CP_CONST because we don't know |
| * the value of the GIC field until after we define these regs. |
| */ |
| { .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_NO_RAW, |
| .accessfn = access_aa32_tid3, |
| .readfn = id_pfr1_read, |
| .writefn = arm_cp_write_ignore }, |
| { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_dfr0 }, |
| { .name = "ID_AFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->id_afr0 }, |
| { .name = "ID_MMFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr0 }, |
| { .name = "ID_MMFR1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr1 }, |
| { .name = "ID_MMFR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr2 }, |
| { .name = "ID_MMFR3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr3 }, |
| { .name = "ID_ISAR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar0 }, |
| { .name = "ID_ISAR1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar1 }, |
| { .name = "ID_ISAR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar2 }, |
| { .name = "ID_ISAR3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar3 }, |
| { .name = "ID_ISAR4", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar4 }, |
| { .name = "ID_ISAR5", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar5 }, |
| { .name = "ID_MMFR4", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr4 }, |
| { .name = "ID_ISAR6", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar6 }, |
| }; |
| define_arm_cp_regs(cpu, v6_idregs); |
| define_arm_cp_regs(cpu, v6_cp_reginfo); |
| } else { |
| define_arm_cp_regs(cpu, not_v6_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V6K)) { |
| define_arm_cp_regs(cpu, v6k_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V7MP) && |
| !arm_feature(env, ARM_FEATURE_PMSA)) { |
| define_arm_cp_regs(cpu, v7mp_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V7VE)) { |
| define_arm_cp_regs(cpu, pmovsset_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V7)) { |
| ARMCPRegInfo clidr = { |
| .name = "CLIDR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_tid4, |
| .fgt = FGT_CLIDR_EL1, |
| .resetvalue = cpu->clidr |
| }; |
| define_one_arm_cp_reg(cpu, &clidr); |
| define_arm_cp_regs(cpu, v7_cp_reginfo); |
| define_debug_regs(cpu); |
| define_pmu_regs(cpu); |
| } else { |
| define_arm_cp_regs(cpu, not_v7_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* |
| * v8 ID registers, which all have impdef reset values. |
| * Note that within the ID register ranges the unused slots |
| * must all RAZ, not UNDEF; future architecture versions may |
| * define new registers here. |
| * ID registers which are AArch64 views of the AArch32 ID registers |
| * which already existed in v6 and v7 are handled elsewhere, |
| * in v6_idregs[]. |
| */ |
| int i; |
| ARMCPRegInfo v8_idregs[] = { |
| /* |
| * ID_AA64PFR0_EL1 is not a plain ARM_CP_CONST in system |
| * emulation because we don't know the right value for the |
| * GIC field until after we define these regs. |
| */ |
| { .name = "ID_AA64PFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 0, |
| .access = PL1_R, |
| #ifdef CONFIG_USER_ONLY |
| .type = ARM_CP_CONST, |
| .resetvalue = cpu->isar.id_aa64pfr0 |
| #else |
| .type = ARM_CP_NO_RAW, |
| .accessfn = access_aa64_tid3, |
| .readfn = id_aa64pfr0_read, |
| .writefn = arm_cp_write_ignore |
| #endif |
| }, |
| { .name = "ID_AA64PFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64pfr1}, |
| { .name = "ID_AA64PFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64PFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ZFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64zfr0 }, |
| { .name = "ID_AA64SMFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64smfr0 }, |
| { .name = "ID_AA64PFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64PFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64dfr0 }, |
| { .name = "ID_AA64DFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64dfr1 }, |
| { .name = "ID_AA64DFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64DFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64AFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->id_aa64afr0 }, |
| { .name = "ID_AA64AFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->id_aa64afr1 }, |
| { .name = "ID_AA64AFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64AFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64isar0 }, |
| { .name = "ID_AA64ISAR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64isar1 }, |
| { .name = "ID_AA64ISAR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64mmfr0 }, |
| { .name = "ID_AA64MMFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64mmfr1 }, |
| { .name = "ID_AA64MMFR2_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64mmfr2 }, |
| { .name = "ID_AA64MMFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "MVFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.mvfr0 }, |
| { .name = "MVFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.mvfr1 }, |
| { .name = "MVFR2_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.mvfr2 }, |
| /* |
| * "0, c0, c3, {0,1,2}" are the encodings corresponding to |
| * AArch64 MVFR[012]_EL1. Define the STATE_AA32 encoding |
| * as RAZ, since it is in the "reserved for future ID |
| * registers, RAZ" part of the AArch32 encoding space. |
| */ |
| { .name = "RES_0_C0_C3_0", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "RES_0_C0_C3_1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "RES_0_C0_C3_2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| /* |
| * Other encodings in "0, c0, c3, ..." are STATE_BOTH because |
| * they're also RAZ for AArch64, and in v8 are gradually |
| * being filled with AArch64-view-of-AArch32-ID-register |
| * for new ID registers. |
| */ |
| { .name = "RES_0_C0_C3_3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_pfr2 }, |
| { .name = "ID_DFR1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_dfr1 }, |
| { .name = "ID_MMFR5", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_mmfr5 }, |
| { .name = "RES_0_C0_C3_7", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "PMCEID0", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .fgt = FGT_PMCEIDN_EL0, |
| .resetvalue = extract64(cpu->pmceid0, 0, 32) }, |
| { .name = "PMCEID0_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 6, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .fgt = FGT_PMCEIDN_EL0, |
| .resetvalue = cpu->pmceid0 }, |
| { .name = "PMCEID1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 7, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .fgt = FGT_PMCEIDN_EL0, |
| .resetvalue = extract64(cpu->pmceid1, 0, 32) }, |
| { .name = "PMCEID1_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .fgt = FGT_PMCEIDN_EL0, |
| .resetvalue = cpu->pmceid1 }, |
| }; |
| #ifdef CONFIG_USER_ONLY |
| static const ARMCPRegUserSpaceInfo v8_user_idregs[] = { |
| { .name = "ID_AA64PFR0_EL1", |
| .exported_bits = R_ID_AA64PFR0_FP_MASK | |
| R_ID_AA64PFR0_ADVSIMD_MASK | |
| R_ID_AA64PFR0_SVE_MASK | |
| R_ID_AA64PFR0_DIT_MASK, |
| .fixed_bits = (0x1u << R_ID_AA64PFR0_EL0_SHIFT) | |
| (0x1u << R_ID_AA64PFR0_EL1_SHIFT) }, |
| { .name = "ID_AA64PFR1_EL1", |
| .exported_bits = R_ID_AA64PFR1_BT_MASK | |
| R_ID_AA64PFR1_SSBS_MASK | |
| R_ID_AA64PFR1_MTE_MASK | |
| R_ID_AA64PFR1_SME_MASK }, |
| { .name = "ID_AA64PFR*_EL1_RESERVED", |
| .is_glob = true }, |
| { .name = "ID_AA64ZFR0_EL1", |
| .exported_bits = R_ID_AA64ZFR0_SVEVER_MASK | |
| R_ID_AA64ZFR0_AES_MASK | |
| R_ID_AA64ZFR0_BITPERM_MASK | |
| R_ID_AA64ZFR0_BFLOAT16_MASK | |
| R_ID_AA64ZFR0_SHA3_MASK | |
| R_ID_AA64ZFR0_SM4_MASK | |
| R_ID_AA64ZFR0_I8MM_MASK | |
| R_ID_AA64ZFR0_F32MM_MASK | |
| R_ID_AA64ZFR0_F64MM_MASK }, |
| { .name = "ID_AA64SMFR0_EL1", |
| .exported_bits = R_ID_AA64SMFR0_F32F32_MASK | |
| R_ID_AA64SMFR0_B16F32_MASK | |
| R_ID_AA64SMFR0_F16F32_MASK | |
| R_ID_AA64SMFR0_I8I32_MASK | |
| R_ID_AA64SMFR0_F64F64_MASK | |
| R_ID_AA64SMFR0_I16I64_MASK | |
| R_ID_AA64SMFR0_FA64_MASK }, |
| { .name = "ID_AA64MMFR0_EL1", |
| .exported_bits = R_ID_AA64MMFR0_ECV_MASK, |
| .fixed_bits = (0xfu << R_ID_AA64MMFR0_TGRAN64_SHIFT) | |
| (0xfu << R_ID_AA64MMFR0_TGRAN4_SHIFT) }, |
| { .name = "ID_AA64MMFR1_EL1", |
| .exported_bits = R_ID_AA64MMFR1_AFP_MASK }, |
| { .name = "ID_AA64MMFR2_EL1", |
| .exported_bits = R_ID_AA64MMFR2_AT_MASK }, |
| { .name = "ID_AA64MMFR*_EL1_RESERVED", |
| .is_glob = true }, |
| { .name = "ID_AA64DFR0_EL1", |
| .fixed_bits = (0x6u << R_ID_AA64DFR0_DEBUGVER_SHIFT) }, |
| { .name = "ID_AA64DFR1_EL1" }, |
| { .name = "ID_AA64DFR*_EL1_RESERVED", |
| .is_glob = true }, |
| { .name = "ID_AA64AFR*", |
| .is_glob = true }, |
| { .name = "ID_AA64ISAR0_EL1", |
| .exported_bits = R_ID_AA64ISAR0_AES_MASK | |
| R_ID_AA64ISAR0_SHA1_MASK | |
| R_ID_AA64ISAR0_SHA2_MASK | |
| R_ID_AA64ISAR0_CRC32_MASK | |
| R_ID_AA64ISAR0_ATOMIC_MASK | |
| R_ID_AA64ISAR0_RDM_MASK | |
| R_ID_AA64ISAR0_SHA3_MASK | |
| R_ID_AA64ISAR0_SM3_MASK | |
| R_ID_AA64ISAR0_SM4_MASK | |
| R_ID_AA64ISAR0_DP_MASK | |
| R_ID_AA64ISAR0_FHM_MASK | |
| R_ID_AA64ISAR0_TS_MASK | |
| R_ID_AA64ISAR0_RNDR_MASK }, |
| { .name = "ID_AA64ISAR1_EL1", |
| .exported_bits = R_ID_AA64ISAR1_DPB_MASK | |
| R_ID_AA64ISAR1_APA_MASK | |
| R_ID_AA64ISAR1_API_MASK | |
| R_ID_AA64ISAR1_JSCVT_MASK | |
| R_ID_AA64ISAR1_FCMA_MASK | |
| R_ID_AA64ISAR1_LRCPC_MASK | |
| R_ID_AA64ISAR1_GPA_MASK | |
| R_ID_AA64ISAR1_GPI_MASK | |
| R_ID_AA64ISAR1_FRINTTS_MASK | |
| R_ID_AA64ISAR1_SB_MASK | |
| R_ID_AA64ISAR1_BF16_MASK | |
| R_ID_AA64ISAR1_DGH_MASK | |
| R_ID_AA64ISAR1_I8MM_MASK }, |
| { .name = "ID_AA64ISAR2_EL1", |
| .exported_bits = R_ID_AA64ISAR2_WFXT_MASK | |
| R_ID_AA64ISAR2_RPRES_MASK | |
| R_ID_AA64ISAR2_GPA3_MASK | |
| R_ID_AA64ISAR2_APA3_MASK }, |
| { .name = "ID_AA64ISAR*_EL1_RESERVED", |
| .is_glob = true }, |
| }; |
| modify_arm_cp_regs(v8_idregs, v8_user_idregs); |
| #endif |
| /* RVBAR_EL1 is only implemented if EL1 is the highest EL */ |
| if (!arm_feature(env, ARM_FEATURE_EL3) && |
| !arm_feature(env, ARM_FEATURE_EL2)) { |
| ARMCPRegInfo rvbar = { |
| .name = "RVBAR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL1_R, |
| .fieldoffset = offsetof(CPUARMState, cp15.rvbar), |
| }; |
| define_one_arm_cp_reg(cpu, &rvbar); |
| } |
| define_arm_cp_regs(cpu, v8_idregs); |
| define_arm_cp_regs(cpu, v8_cp_reginfo); |
| |
| for (i = 4; i < 16; i++) { |
| /* |
| * Encodings in "0, c0, {c4-c7}, {0-7}" are RAZ for AArch32. |
| * For pre-v8 cores there are RAZ patterns for these in |
| * id_pre_v8_midr_cp_reginfo[]; for v8 we do that here. |
| * v8 extends the "must RAZ" part of the ID register space |
| * to also cover c0, 0, c{8-15}, {0-7}. |
| * These are STATE_AA32 because in the AArch64 sysreg space |
| * c4-c7 is where the AArch64 ID registers live (and we've |
| * already defined those in v8_idregs[]), and c8-c15 are not |
| * "must RAZ" for AArch64. |
| */ |
| g_autofree char *name = g_strdup_printf("RES_0_C0_C%d_X", i); |
| ARMCPRegInfo v8_aa32_raz_idregs = { |
| .name = name, |
| .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 0, .crm = i, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }; |
| define_one_arm_cp_reg(cpu, &v8_aa32_raz_idregs); |
| } |
| } |
| |
| /* |
| * Register the base EL2 cpregs. |
| * Pre v8, these registers are implemented only as part of the |
| * Virtualization Extensions (EL2 present). Beginning with v8, |
| * if EL2 is missing but EL3 is enabled, mostly these become |
| * RES0 from EL3, with some specific exceptions. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL2) |
| || (arm_feature(env, ARM_FEATURE_EL3) |
| && arm_feature(env, ARM_FEATURE_V8))) { |
| uint64_t vmpidr_def = mpidr_read_val(env); |
| ARMCPRegInfo vpidr_regs[] = { |
| { .name = "VPIDR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .resetvalue = cpu->midr, |
| .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) }, |
| { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .resetvalue = cpu->midr, |
| .type = ARM_CP_EL3_NO_EL2_C_NZ, |
| .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, |
| { .name = "VMPIDR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .resetvalue = vmpidr_def, |
| .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_C_NZ, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) }, |
| { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, |
| .access = PL2_RW, .resetvalue = vmpidr_def, |
| .type = ARM_CP_EL3_NO_EL2_C_NZ, |
| .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, |
| }; |
| /* |
| * The only field of MDCR_EL2 that has a defined architectural reset |
| * value is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N. |
| */ |
| ARMCPRegInfo mdcr_el2 = { |
| .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1, |
| .writefn = mdcr_el2_write, |
| .access = PL2_RW, .resetvalue = pmu_num_counters(env), |
| .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el2), |
| }; |
| define_one_arm_cp_reg(cpu, &mdcr_el2); |
| define_arm_cp_regs(cpu, vpidr_regs); |
| define_arm_cp_regs(cpu, el2_cp_reginfo); |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| define_arm_cp_regs(cpu, el2_v8_cp_reginfo); |
| } |
| if (cpu_isar_feature(aa64_sel2, cpu)) { |
| define_arm_cp_regs(cpu, el2_sec_cp_reginfo); |
| } |
| /* RVBAR_EL2 is only implemented if EL2 is the highest EL */ |
| if (!arm_feature(env, ARM_FEATURE_EL3)) { |
| ARMCPRegInfo rvbar[] = { |
| { |
| .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL2_R, |
| .fieldoffset = offsetof(CPUARMState, cp15.rvbar), |
| }, |
| { .name = "RVBAR", .type = ARM_CP_ALIAS, |
| .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL2_R, |
| .fieldoffset = offsetof(CPUARMState, cp15.rvbar), |
| }, |
| }; |
| define_arm_cp_regs(cpu, rvbar); |
| } |
| } |
| |
| /* Register the base EL3 cpregs. */ |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| define_arm_cp_regs(cpu, el3_cp_reginfo); |
| ARMCPRegInfo el3_regs[] = { |
| { .name = "RVBAR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL3_R, |
| .fieldoffset = offsetof(CPUARMState, cp15.rvbar), |
| }, |
| { .name = "SCTLR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, |
| .raw_writefn = raw_write, .writefn = sctlr_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]), |
| .resetvalue = cpu->reset_sctlr }, |
| }; |
| |
| define_arm_cp_regs(cpu, el3_regs); |
| } |
| /* |
| * The behaviour of NSACR is sufficiently various that we don't |
| * try to describe it in a single reginfo: |
| * if EL3 is 64 bit, then trap to EL3 from S EL1, |
| * reads as constant 0xc00 from NS EL1 and NS EL2 |
| * if EL3 is 32 bit, then RW at EL3, RO at NS EL1 and NS EL2 |
| * if v7 without EL3, register doesn't exist |
| * if v8 without EL3, reads as constant 0xc00 from NS EL1 and NS EL2 |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| if (arm_feature(env, ARM_FEATURE_AARCH64)) { |
| static const ARMCPRegInfo nsacr = { |
| .name = "NSACR", .type = ARM_CP_CONST, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL1_RW, .accessfn = nsacr_access, |
| .resetvalue = 0xc00 |
| }; |
| define_one_arm_cp_reg(cpu, &nsacr); |
| } else { |
| static const ARMCPRegInfo nsacr = { |
| .name = "NSACR", |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL3_RW | PL1_R, |
| .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.nsacr) |
| }; |
| define_one_arm_cp_reg(cpu, &nsacr); |
| } |
| } else { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| static const ARMCPRegInfo nsacr = { |
| .name = "NSACR", .type = ARM_CP_CONST, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL1_R, |
| .resetvalue = 0xc00 |
| }; |
| define_one_arm_cp_reg(cpu, &nsacr); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA)) { |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| /* PMSAv6 not implemented */ |
| assert(arm_feature(env, ARM_FEATURE_V7)); |
| define_arm_cp_regs(cpu, vmsa_pmsa_cp_reginfo); |
| define_arm_cp_regs(cpu, pmsav7_cp_reginfo); |
| } else { |
| define_arm_cp_regs(cpu, pmsav5_cp_reginfo); |
| } |
| } else { |
| define_arm_cp_regs(cpu, vmsa_pmsa_cp_reginfo); |
| define_arm_cp_regs(cpu, vmsa_cp_reginfo); |
| /* TTCBR2 is introduced with ARMv8.2-AA32HPD. */ |
| if (cpu_isar_feature(aa32_hpd, cpu)) { |
| define_one_arm_cp_reg(cpu, &ttbcr2_reginfo); |
| } |
| } |
| if (arm_feature(env, ARM_FEATURE_THUMB2EE)) { |
| define_arm_cp_regs(cpu, t2ee_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) { |
| define_arm_cp_regs(cpu, generic_timer_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_VAPA)) { |
| define_arm_cp_regs(cpu, vapa_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_CACHE_TEST_CLEAN)) { |
| define_arm_cp_regs(cpu, cache_test_clean_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_CACHE_DIRTY_REG)) { |
| define_arm_cp_regs(cpu, cache_dirty_status_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_CACHE_BLOCK_OPS)) { |
| define_arm_cp_regs(cpu, cache_block_ops_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) { |
| define_arm_cp_regs(cpu, omap_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_STRONGARM)) { |
| define_arm_cp_regs(cpu, strongarm_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| define_arm_cp_regs(cpu, xscale_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_DUMMY_C15_REGS)) { |
| define_arm_cp_regs(cpu, dummy_c15_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| define_arm_cp_regs(cpu, lpae_cp_reginfo); |
| } |
| if (cpu_isar_feature(aa32_jazelle, cpu)) { |
| define_arm_cp_regs(cpu, jazelle_regs); |
| } |
| /* |
| * Slightly awkwardly, the OMAP and StrongARM cores need all of |
| * cp15 crn=0 to be writes-ignored, whereas for other cores they should |
| * be read-only (ie write causes UNDEF exception). |
| */ |
| { |
| ARMCPRegInfo id_pre_v8_midr_cp_reginfo[] = { |
| /* |
| * Pre-v8 MIDR space. |
| * Note that the MIDR isn't a simple constant register because |
| * of the TI925 behaviour where writes to another register can |
| * cause the MIDR value to change. |
| * |
| * Unimplemented registers in the c15 0 0 0 space default to |
| * MIDR. Define MIDR first as this entire space, then CTR, TCMTR |
| * and friends override accordingly. |
| */ |
| { .name = "MIDR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .resetvalue = cpu->midr, |
| .writefn = arm_cp_write_ignore, .raw_writefn = raw_write, |
| .readfn = midr_read, |
| .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), |
| .type = ARM_CP_OVERRIDE }, |
| /* crn = 0 op1 = 0 crm = 3..7 : currently unassigned; we RAZ. */ |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 3, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 4, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 5, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 6, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 7, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| }; |
| ARMCPRegInfo id_v8_midr_cp_reginfo[] = { |
| { .name = "MIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr, |
| .fgt = FGT_MIDR_EL1, |
| .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), |
| .readfn = midr_read }, |
| /* crn = 0 op1 = 0 crm = 0 op2 = 7 : AArch32 aliases of MIDR */ |
| { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 7, |
| .access = PL1_R, .resetvalue = cpu->midr }, |
| { .name = "REVIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 6, |
| .access = PL1_R, |
| .accessfn = access_aa64_tid1, |
| .fgt = FGT_REVIDR_EL1, |
| .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, |
| }; |
| ARMCPRegInfo id_v8_midr_alias_cp_reginfo = { |
| .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_R, .resetvalue = cpu->midr |
| }; |
| ARMCPRegInfo id_cp_reginfo[] = { |
| /* These are common to v8 and pre-v8 */ |
| { .name = "CTR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_R, .accessfn = ctr_el0_access, |
| .type = ARM_CP_CONST, .resetvalue = cpu->ctr }, |
| { .name = "CTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 0, .crm = 0, |
| .access = PL0_R, .accessfn = ctr_el0_access, |
| .fgt = FGT_CTR_EL0, |
| .type = ARM_CP_CONST, .resetvalue = cpu->ctr }, |
| /* TCMTR and TLBTR exist in v8 but have no 64-bit versions */ |
| { .name = "TCMTR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_R, |
| .accessfn = access_aa32_tid1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| }; |
| /* TLBTR is specific to VMSA */ |
| ARMCPRegInfo id_tlbtr_reginfo = { |
| .name = "TLBTR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 3, |
| .access = PL1_R, |
| .accessfn = access_aa32_tid1, |
| .type = ARM_CP_CONST, .resetvalue = 0, |
| }; |
| /* MPUIR is specific to PMSA V6+ */ |
| ARMCPRegInfo id_mpuir_reginfo = { |
| .name = "MPUIR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .resetvalue = cpu->pmsav7_dregion << 8 |
| }; |
| /* HMPUIR is specific to PMSA V8 */ |
| ARMCPRegInfo id_hmpuir_reginfo = { |
| .name = "HMPUIR", |
| .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 4, |
| .access = PL2_R, .type = ARM_CP_CONST, |
| .resetvalue = cpu->pmsav8r_hdregion |
| }; |
| static const ARMCPRegInfo crn0_wi_reginfo = { |
| .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W, |
| .type = ARM_CP_NOP | ARM_CP_OVERRIDE |
| }; |
| #ifdef CONFIG_USER_ONLY |
| static const ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = { |
| { .name = "MIDR_EL1", |
| .exported_bits = R_MIDR_EL1_REVISION_MASK | |
| R_MIDR_EL1_PARTNUM_MASK | |
| R_MIDR_EL1_ARCHITECTURE_MASK | |
| R_MIDR_EL1_VARIANT_MASK | |
| R_MIDR_EL1_IMPLEMENTER_MASK }, |
| { .name = "REVIDR_EL1" }, |
| }; |
| modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo); |
| #endif |
| if (arm_feature(env, ARM_FEATURE_OMAPCP) || |
| arm_feature(env, ARM_FEATURE_STRONGARM)) { |
| size_t i; |
| /* |
| * Register the blanket "writes ignored" value first to cover the |
| * whole space. Then update the specific ID registers to allow write |
| * access, so that they ignore writes rather than causing them to |
| * UNDEF. |
| */ |
| define_one_arm_cp_reg(cpu, &crn0_wi_reginfo); |
| for (i = 0; i < ARRAY_SIZE(id_pre_v8_midr_cp_reginfo); ++i) { |
| id_pre_v8_midr_cp_reginfo[i].access = PL1_RW; |
| } |
| for (i = 0; i < ARRAY_SIZE(id_cp_reginfo); ++i) { |
| id_cp_reginfo[i].access = PL1_RW; |
| } |
| id_mpuir_reginfo.access = PL1_RW; |
| id_tlbtr_reginfo.access = PL1_RW; |
| } |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo); |
| if (!arm_feature(env, ARM_FEATURE_PMSA)) { |
| define_one_arm_cp_reg(cpu, &id_v8_midr_alias_cp_reginfo); |
| } |
| } else { |
| define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); |
| } |
| define_arm_cp_regs(cpu, id_cp_reginfo); |
| if (!arm_feature(env, ARM_FEATURE_PMSA)) { |
| define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); |
| } else if (arm_feature(env, ARM_FEATURE_PMSA) && |
| arm_feature(env, ARM_FEATURE_V8)) { |
| uint32_t i = 0; |
| char *tmp_string; |
| |
| define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); |
| define_one_arm_cp_reg(cpu, &id_hmpuir_reginfo); |
| define_arm_cp_regs(cpu, pmsav8r_cp_reginfo); |
| |
| /* Register alias is only valid for first 32 indexes */ |
| for (i = 0; i < MIN(cpu->pmsav7_dregion, 32); ++i) { |
| uint8_t crm = 0b1000 | extract32(i, 1, 3); |
| uint8_t opc1 = extract32(i, 4, 1); |
| uint8_t opc2 = extract32(i, 0, 1) << 2; |
| |
| tmp_string = g_strdup_printf("PRBAR%u", i); |
| ARMCPRegInfo tmp_prbarn_reginfo = { |
| .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, |
| .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, |
| .access = PL1_RW, .resetvalue = 0, |
| .accessfn = access_tvm_trvm, |
| .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read |
| }; |
| define_one_arm_cp_reg(cpu, &tmp_prbarn_reginfo); |
| g_free(tmp_string); |
| |
| opc2 = extract32(i, 0, 1) << 2 | 0x1; |
| tmp_string = g_strdup_printf("PRLAR%u", i); |
| ARMCPRegInfo tmp_prlarn_reginfo = { |
| .name = tmp_string, .type = ARM_CP_ALIAS | ARM_CP_NO_RAW, |
| .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, |
| .access = PL1_RW, .resetvalue = 0, |
| .accessfn = access_tvm_trvm, |
| .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read |
| }; |
| define_one_arm_cp_reg(cpu, &tmp_prlarn_reginfo); |
| g_free(tmp_string); |
| } |
| |
| /* Register alias is only valid for first 32 indexes */ |
| for (i = 0; i < MIN(cpu->pmsav8r_hdregion, 32); ++i) { |
| uint8_t crm = 0b1000 | extract32(i, 1, 3); |
| uint8_t opc1 = 0b100 | extract32(i, 4, 1); |
| uint8_t opc2 = extract32(i, 0, 1) << 2; |
| |
| tmp_string = g_strdup_printf("HPRBAR%u", i); |
| ARMCPRegInfo tmp_hprbarn_reginfo = { |
| .name = tmp_string, |
| .type = ARM_CP_NO_RAW, |
| .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, |
| .access = PL2_RW, .resetvalue = 0, |
| .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read |
| }; |
| define_one_arm_cp_reg(cpu, &tmp_hprbarn_reginfo); |
| g_free(tmp_string); |
| |
| opc2 = extract32(i, 0, 1) << 2 | 0x1; |
| tmp_string = g_strdup_printf("HPRLAR%u", i); |
| ARMCPRegInfo tmp_hprlarn_reginfo = { |
| .name = tmp_string, |
| .type = ARM_CP_NO_RAW, |
| .cp = 15, .opc1 = opc1, .crn = 6, .crm = crm, .opc2 = opc2, |
| .access = PL2_RW, .resetvalue = 0, |
| .writefn = pmsav8r_regn_write, .readfn = pmsav8r_regn_read |
| }; |
| define_one_arm_cp_reg(cpu, &tmp_hprlarn_reginfo); |
| g_free(tmp_string); |
| } |
| } else if (arm_feature(env, ARM_FEATURE_V7)) { |
| define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_MPIDR)) { |
| ARMCPRegInfo mpidr_cp_reginfo[] = { |
| { .name = "MPIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5, |
| .fgt = FGT_MPIDR_EL1, |
| .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_RAW }, |
| }; |
| #ifdef CONFIG_USER_ONLY |
| static const ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo[] = { |
| { .name = "MPIDR_EL1", |
| .fixed_bits = 0x0000000080000000 }, |
| }; |
| modify_arm_cp_regs(mpidr_cp_reginfo, mpidr_user_cp_reginfo); |
| #endif |
| define_arm_cp_regs(cpu, mpidr_cp_reginfo); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_AUXCR)) { |
| ARMCPRegInfo auxcr_reginfo[] = { |
| { .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tacr, |
| .type = ARM_CP_CONST, .resetvalue = cpu->reset_auxcr }, |
| { .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "ACTLR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 1, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| }; |
| define_arm_cp_regs(cpu, auxcr_reginfo); |
| if (cpu_isar_feature(aa32_ac2, cpu)) { |
| define_arm_cp_regs(cpu, actlr2_hactlr2_reginfo); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_CBAR)) { |
| /* |
| * CBAR is IMPDEF, but common on Arm Cortex-A implementations. |
| * There are two flavours: |
| * (1) older 32-bit only cores have a simple 32-bit CBAR |
| * (2) 64-bit cores have a 64-bit CBAR visible to AArch64, plus a |
| * 32-bit register visible to AArch32 at a different encoding |
| * to the "flavour 1" register and with the bits rearranged to |
| * be able to squash a 64-bit address into the 32-bit view. |
| * We distinguish the two via the ARM_FEATURE_AARCH64 flag, but |
| * in future if we support AArch32-only configs of some of the |
| * AArch64 cores we might need to add a specific feature flag |
| * to indicate cores with "flavour 2" CBAR. |
| */ |
| if (arm_feature(env, ARM_FEATURE_AARCH64)) { |
| /* 32 bit view is [31:18] 0...0 [43:32]. */ |
| uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18) |
| | extract64(cpu->reset_cbar, 32, 12); |
| ARMCPRegInfo cbar_reginfo[] = { |
| { .name = "CBAR", |
| .type = ARM_CP_CONST, |
| .cp = 15, .crn = 15, .crm = 3, .opc1 = 1, .opc2 = 0, |
| .access = PL1_R, .resetvalue = cbar32 }, |
| { .name = "CBAR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_CONST, |
| .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 0, |
| .access = PL1_R, .resetvalue = cpu->reset_cbar }, |
| }; |
| /* We don't implement a r/w 64 bit CBAR currently */ |
| assert(arm_feature(env, ARM_FEATURE_CBAR_RO)); |
| define_arm_cp_regs(cpu, cbar_reginfo); |
| } else { |
| ARMCPRegInfo cbar = { |
| .name = "CBAR", |
| .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0, |
| .access = PL1_R | PL3_W, .resetvalue = cpu->reset_cbar, |
| .fieldoffset = offsetof(CPUARMState, |
| cp15.c15_config_base_address) |
| }; |
| if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { |
| cbar.access = PL1_R; |
| cbar.fieldoffset = 0; |
| cbar.type = ARM_CP_CONST; |
| } |
| define_one_arm_cp_reg(cpu, &cbar); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_VBAR)) { |
| static const ARMCPRegInfo vbar_cp_reginfo[] = { |
| { .name = "VBAR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .writefn = vbar_write, |
| .fgt = FGT_VBAR_EL1, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s), |
| offsetof(CPUARMState, cp15.vbar_ns) }, |
| .resetvalue = 0 }, |
| }; |
| define_arm_cp_regs(cpu, vbar_cp_reginfo); |
| } |
| |
| /* Generic registers whose values depend on the implementation */ |
| { |
| ARMCPRegInfo sctlr = { |
| .name = "SCTLR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fgt = FGT_SCTLR_EL1, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), |
| offsetof(CPUARMState, cp15.sctlr_ns) }, |
| .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, |
| .raw_writefn = raw_write, |
| }; |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| /* |
| * Normally we would always end the TB on an SCTLR write, but Linux |
| * arch/arm/mach-pxa/sleep.S expects two instructions following |
| * an MMU enable to execute from cache. Imitate this behaviour. |
| */ |
| sctlr.type |= ARM_CP_SUPPRESS_TB_END; |
| } |
| define_one_arm_cp_reg(cpu, &sctlr); |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA) && |
| arm_feature(env, ARM_FEATURE_V8)) { |
| ARMCPRegInfo vsctlr = { |
| .name = "VSCTLR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .resetvalue = 0x0, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.vsctlr), |
| }; |
| define_one_arm_cp_reg(cpu, &vsctlr); |
| } |
| } |
| |
| if (cpu_isar_feature(aa64_lor, cpu)) { |
| define_arm_cp_regs(cpu, lor_reginfo); |
| } |
| if (cpu_isar_feature(aa64_pan, cpu)) { |
| define_one_arm_cp_reg(cpu, &pan_reginfo); |
| } |
| #ifndef CONFIG_USER_ONLY |
| if (cpu_isar_feature(aa64_ats1e1, cpu)) { |
| define_arm_cp_regs(cpu, ats1e1_reginfo); |
| } |
| if (cpu_isar_feature(aa32_ats1e1, cpu)) { |
| define_arm_cp_regs(cpu, ats1cp_reginfo); |
| } |
| #endif |
| if (cpu_isar_feature(aa64_uao, cpu)) { |
| define_one_arm_cp_reg(cpu, &uao_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_dit, cpu)) { |
| define_one_arm_cp_reg(cpu, &dit_reginfo); |
| } |
| if (cpu_isar_feature(aa64_ssbs, cpu)) { |
| define_one_arm_cp_reg(cpu, &ssbs_reginfo); |
| } |
| if (cpu_isar_feature(any_ras, cpu)) { |
| define_arm_cp_regs(cpu, minimal_ras_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_vh, cpu) || |
| cpu_isar_feature(aa64_debugv8p2, cpu)) { |
| define_one_arm_cp_reg(cpu, &contextidr_el2); |
| } |
| if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { |
| define_arm_cp_regs(cpu, vhe_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_sve, cpu)) { |
| define_arm_cp_regs(cpu, zcr_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_hcx, cpu)) { |
| define_one_arm_cp_reg(cpu, &hcrx_el2_reginfo); |
| } |
| |
| #ifdef TARGET_AARCH64 |
| if (cpu_isar_feature(aa64_sme, cpu)) { |
| define_arm_cp_regs(cpu, sme_reginfo); |
| } |
| if (cpu_isar_feature(aa64_pauth, cpu)) { |
| define_arm_cp_regs(cpu, pauth_reginfo); |
| } |
| if (cpu_isar_feature(aa64_rndr, cpu)) { |
| define_arm_cp_regs(cpu, rndr_reginfo); |
| } |
| if (cpu_isar_feature(aa64_tlbirange, cpu)) { |
| define_arm_cp_regs(cpu, tlbirange_reginfo); |
| } |
| if (cpu_isar_feature(aa64_tlbios, cpu)) { |
| define_arm_cp_regs(cpu, tlbios_reginfo); |
| } |
| #ifndef CONFIG_USER_ONLY |
| /* Data Cache clean instructions up to PoP */ |
| if (cpu_isar_feature(aa64_dcpop, cpu)) { |
| define_one_arm_cp_reg(cpu, dcpop_reg); |
| |
| if (cpu_isar_feature(aa64_dcpodp, cpu)) { |
| define_one_arm_cp_reg(cpu, dcpodp_reg); |
| } |
| } |
| #endif /*CONFIG_USER_ONLY*/ |
| |
| /* |
| * If full MTE is enabled, add all of the system registers. |
| * If only "instructions available at EL0" are enabled, |
| * then define only a RAZ/WI version of PSTATE.TCO. |
| */ |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| define_arm_cp_regs(cpu, mte_reginfo); |
| define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); |
| } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { |
| define_arm_cp_regs(cpu, mte_tco_ro_reginfo); |
| define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_scxtnum, cpu)) { |
| define_arm_cp_regs(cpu, scxtnum_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_fgt, cpu)) { |
| define_arm_cp_regs(cpu, fgt_reginfo); |
| } |
| #endif |
| |
| if (cpu_isar_feature(any_predinv, cpu)) { |
| define_arm_cp_regs(cpu, predinv_reginfo); |
| } |
| |
| if (cpu_isar_feature(any_ccidx, cpu)) { |
| define_arm_cp_regs(cpu, ccsidr2_reginfo); |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| /* |
| * Register redirections and aliases must be done last, |
| * after the registers from the other extensions have been defined. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { |
| define_arm_vh_e2h_redirects_aliases(cpu); |
| } |
| #endif |
| } |
| |
| /* Sort alphabetically by type name, except for "any". */ |
| static gint arm_cpu_list_compare(gconstpointer a, gconstpointer b) |
| { |
| ObjectClass *class_a = (ObjectClass *)a; |
| ObjectClass *class_b = (ObjectClass *)b; |
| const char *name_a, *name_b; |
| |
| name_a = object_class_get_name(class_a); |
| name_b = object_class_get_name(class_b); |
| if (strcmp(name_a, "any-" TYPE_ARM_CPU) == 0) { |
| return 1; |
| } else if (strcmp(name_b, "any-" TYPE_ARM_CPU) == 0) { |
| return -1; |
| } else { |
| return strcmp(name_a, name_b); |
| } |
| } |
| |
| static void arm_cpu_list_entry(gpointer data, gpointer user_data) |
| { |
| ObjectClass *oc = data; |
| CPUClass *cc = CPU_CLASS(oc); |
| const char *typename; |
| char *name; |
| |
| typename = object_class_get_name(oc); |
| name = g_strndup(typename, strlen(typename) - strlen("-" TYPE_ARM_CPU)); |
| if (cc->deprecation_note) { |
| qemu_printf(" %s (deprecated)\n", name); |
| } else { |
| qemu_printf(" %s\n", name); |
| } |
| g_free(name); |
| } |
| |
| void arm_cpu_list(void) |
| { |
| GSList *list; |
| |
| list = object_class_get_list(TYPE_ARM_CPU, false); |
| list = g_slist_sort(list, arm_cpu_list_compare); |
| qemu_printf("Available CPUs:\n"); |
| g_slist_foreach(list, arm_cpu_list_entry, NULL); |
| g_slist_free(list); |
| } |
| |
| static void arm_cpu_add_definition(gpointer data, gpointer user_data) |
| { |
| ObjectClass *oc = data; |
| CpuDefinitionInfoList **cpu_list = user_data; |
| CpuDefinitionInfo *info; |
| const char *typename; |
| |
| typename = object_class_get_name(oc); |
| info = g_malloc0(sizeof(*info)); |
| info->name = g_strndup(typename, |
| strlen(typename) - strlen("-" TYPE_ARM_CPU)); |
| info->q_typename = g_strdup(typename); |
| |
| QAPI_LIST_PREPEND(*cpu_list, info); |
| } |
| |
| CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp) |
| { |
| CpuDefinitionInfoList *cpu_list = NULL; |
| GSList *list; |
| |
| list = object_class_get_list(TYPE_ARM_CPU, false); |
| g_slist_foreach(list, arm_cpu_add_definition, &cpu_list); |
| g_slist_free(list); |
| |
| return cpu_list; |
| } |
| |
| /* |
| * Private utility function for define_one_arm_cp_reg_with_opaque(): |
| * add a single reginfo struct to the hash table. |
| */ |
| static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, |
| void *opaque, CPState state, |
| CPSecureState secstate, |
| int crm, int opc1, int opc2, |
| const char *name) |
| { |
| CPUARMState *env = &cpu->env; |
| uint32_t key; |
| ARMCPRegInfo *r2; |
| bool is64 = r->type & ARM_CP_64BIT; |
| bool ns = secstate & ARM_CP_SECSTATE_NS; |
| int cp = r->cp; |
| size_t name_len; |
| bool make_const; |
| |
| switch (state) { |
| case ARM_CP_STATE_AA32: |
| /* We assume it is a cp15 register if the .cp field is left unset. */ |
| if (cp == 0 && r->state == ARM_CP_STATE_BOTH) { |
| cp = 15; |
| } |
| key = ENCODE_CP_REG(cp, is64, ns, r->crn, crm, opc1, opc2); |
| break; |
| case ARM_CP_STATE_AA64: |
| /* |
| * To allow abbreviation of ARMCPRegInfo definitions, we treat |
| * cp == 0 as equivalent to the value for "standard guest-visible |
| * sysreg". STATE_BOTH definitions are also always "standard sysreg" |
| * in their AArch64 view (the .cp value may be non-zero for the |
| * benefit of the AArch32 view). |
| */ |
| if (cp == 0 || r->state == ARM_CP_STATE_BOTH) { |
| cp = CP_REG_ARM64_SYSREG_CP; |
| } |
| key = ENCODE_AA64_CP_REG(cp, r->crn, crm, r->opc0, opc1, opc2); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| /* Overriding of an existing definition must be explicitly requested. */ |
| if (!(r->type & ARM_CP_OVERRIDE)) { |
| const ARMCPRegInfo *oldreg = get_arm_cp_reginfo(cpu->cp_regs, key); |
| if (oldreg) { |
| assert(oldreg->type & ARM_CP_OVERRIDE); |
| } |
| } |
| |
| /* |
| * Eliminate registers that are not present because the EL is missing. |
| * Doing this here makes it easier to put all registers for a given |
| * feature into the same ARMCPRegInfo array and define them all at once. |
| */ |
| make_const = false; |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| /* |
| * An EL2 register without EL2 but with EL3 is (usually) RES0. |
| * See rule RJFFP in section D1.1.3 of DDI0487H.a. |
| */ |
| int min_el = ctz32(r->access) / 2; |
| if (min_el == 2 && !arm_feature(env, ARM_FEATURE_EL2)) { |
| if (r->type & ARM_CP_EL3_NO_EL2_UNDEF) { |
| return; |
| } |
| make_const = !(r->type & ARM_CP_EL3_NO_EL2_KEEP); |
| } |
| } else { |
| CPAccessRights max_el = (arm_feature(env, ARM_FEATURE_EL2) |
| ? PL2_RW : PL1_RW); |
| if ((r->access & max_el) == 0) { |
| return; |
| } |
| } |
| |
| /* Combine cpreg and name into one allocation. */ |
| name_len = strlen(name) + 1; |
| r2 = g_malloc(sizeof(*r2) + name_len); |
| *r2 = *r; |
| r2->name = memcpy(r2 + 1, name, name_len); |
| |
| /* |
| * Update fields to match the instantiation, overwiting wildcards |
| * such as CP_ANY, ARM_CP_STATE_BOTH, or ARM_CP_SECSTATE_BOTH. |
| */ |
| r2->cp = cp; |
| r2->crm = crm; |
| r2->opc1 = opc1; |
| r2->opc2 = opc2; |
| r2->state = state; |
| r2->secure = secstate; |
| if (opaque) { |
| r2->opaque = opaque; |
| } |
| |
| if (make_const) { |
| /* This should not have been a very special register to begin. */ |
| int old_special = r2->type & ARM_CP_SPECIAL_MASK; |
| assert(old_special == 0 || old_special == ARM_CP_NOP); |
| /* |
| * Set the special function to CONST, retaining the other flags. |
| * This is important for e.g. ARM_CP_SVE so that we still |
| * take the SVE trap if CPTR_EL3.EZ == 0. |
| */ |
| r2->type = (r2->type & ~ARM_CP_SPECIAL_MASK) | ARM_CP_CONST; |
| /* |
| * Usually, these registers become RES0, but there are a few |
| * special cases like VPIDR_EL2 which have a constant non-zero |
| * value with writes ignored. |
| */ |
| if (!(r->type & ARM_CP_EL3_NO_EL2_C_NZ)) { |
| r2->resetvalue = 0; |
| } |
| /* |
| * ARM_CP_CONST has precedence, so removing the callbacks and |
| * offsets are not strictly necessary, but it is potentially |
| * less confusing to debug later. |
| */ |
| r2->readfn = NULL; |
| r2->writefn = NULL; |
| r2->raw_readfn = NULL; |
| r2->raw_writefn = NULL; |
| r2->resetfn = NULL; |
| r2->fieldoffset = 0; |
| r2->bank_fieldoffsets[0] = 0; |
| r2->bank_fieldoffsets[1] = 0; |
| } else { |
| bool isbanked = r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]; |
| |
| if (isbanked) { |
| /* |
| * Register is banked (using both entries in array). |
| * Overwriting fieldoffset as the array is only used to define |
| * banked registers but later only fieldoffset is used. |
| */ |
| r2->fieldoffset = r->bank_fieldoffsets[ns]; |
| } |
| if (state == ARM_CP_STATE_AA32) { |
| if (isbanked) { |
| /* |
| * If the register is banked then we don't need to migrate or |
| * reset the 32-bit instance in certain cases: |
| * |
| * 1) If the register has both 32-bit and 64-bit instances |
| * then we can count on the 64-bit instance taking care |
| * of the non-secure bank. |
| * 2) If ARMv8 is enabled then we can count on a 64-bit |
| * version taking care of the secure bank. This requires |
| * that separate 32 and 64-bit definitions are provided. |
| */ |
| if ((r->state == ARM_CP_STATE_BOTH && ns) || |
| (arm_feature(env, ARM_FEATURE_V8) && !ns)) { |
| r2->type |= ARM_CP_ALIAS; |
| } |
| } else if ((secstate != r->secure) && !ns) { |
| /* |
| * The register is not banked so we only want to allow |
| * migration of the non-secure instance. |
| */ |
| r2->type |= ARM_CP_ALIAS; |
| } |
| |
| if (HOST_BIG_ENDIAN && |
| r->state == ARM_CP_STATE_BOTH && r2->fieldoffset) { |
| r2->fieldoffset += sizeof(uint32_t); |
| } |
| } |
| } |
| |
| /* |
| * By convention, for wildcarded registers only the first |
| * entry is used for migration; the others are marked as |
| * ALIAS so we don't try to transfer the register |
| * multiple times. Special registers (ie NOP/WFI) are |
| * never migratable and not even raw-accessible. |
| */ |
| if (r2->type & ARM_CP_SPECIAL_MASK) { |
| r2->type |= ARM_CP_NO_RAW; |
| } |
| if (((r->crm == CP_ANY) && crm != 0) || |
| ((r->opc1 == CP_ANY) && opc1 != 0) || |
| ((r->opc2 == CP_ANY) && opc2 != 0)) { |
| r2->type |= ARM_CP_ALIAS | ARM_CP_NO_GDB; |
| } |
| |
| /* |
| * Check that raw accesses are either forbidden or handled. Note that |
| * we can't assert this earlier because the setup of fieldoffset for |
| * banked registers has to be done first. |
| */ |
| if (!(r2->type & ARM_CP_NO_RAW)) { |
| assert(!raw_accessors_invalid(r2)); |
| } |
| |
| g_hash_table_insert(cpu->cp_regs, (gpointer)(uintptr_t)key, r2); |
| } |
| |
| |
| void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, |
| const ARMCPRegInfo *r, void *opaque) |
| { |
| /* |
| * Define implementations of coprocessor registers. |
| * We store these in a hashtable because typically |
| * there are less than 150 registers in a space which |
| * is 16*16*16*8*8 = 262144 in size. |
| * Wildcarding is supported for the crm, opc1 and opc2 fields. |
| * If a register is defined twice then the second definition is |
| * used, so this can be used to define some generic registers and |
| * then override them with implementation specific variations. |
| * At least one of the original and the second definition should |
| * include ARM_CP_OVERRIDE in its type bits -- this is just a guard |
| * against accidental use. |
| * |
| * The state field defines whether the register is to be |
| * visible in the AArch32 or AArch64 execution state. If the |
| * state is set to ARM_CP_STATE_BOTH then we synthesise a |
| * reginfo structure for the AArch32 view, which sees the lower |
| * 32 bits of the 64 bit register. |
| * |
| * Only registers visible in AArch64 may set r->opc0; opc0 cannot |
| * be wildcarded. AArch64 registers are always considered to be 64 |
| * bits; the ARM_CP_64BIT* flag applies only to the AArch32 view of |
| * the register, if any. |
| */ |
| int crm, opc1, opc2; |
| int crmmin = (r->crm == CP_ANY) ? 0 : r->crm; |
| int crmmax = (r->crm == CP_ANY) ? 15 : r->crm; |
| int opc1min = (r->opc1 == CP_ANY) ? 0 : r->opc1; |
| int opc1max = (r->opc1 == CP_ANY) ? 7 : r->opc1; |
| int opc2min = (r->opc2 == CP_ANY) ? 0 : r->opc2; |
| int opc2max = (r->opc2 == CP_ANY) ? 7 : r->opc2; |
| CPState state; |
| |
| /* 64 bit registers have only CRm and Opc1 fields */ |
| assert(!((r->type & ARM_CP_64BIT) && (r->opc2 || r->crn))); |
| /* op0 only exists in the AArch64 encodings */ |
| assert((r->state != ARM_CP_STATE_AA32) || (r->opc0 == 0)); |
| /* AArch64 regs are all 64 bit so ARM_CP_64BIT is meaningless */ |
| assert((r->state != ARM_CP_STATE_AA64) || !(r->type & ARM_CP_64BIT)); |
| /* |
| * This API is only for Arm's system coprocessors (14 and 15) or |
| * (M-profile or v7A-and-earlier only) for implementation defined |
| * coprocessors in the range 0..7. Our decode assumes this, since |
| * 8..13 can be used for other insns including VFP and Neon. See |
| * valid_cp() in translate.c. Assert here that we haven't tried |
| * to use an invalid coprocessor number. |
| */ |
| switch (r->state) { |
| case ARM_CP_STATE_BOTH: |
| /* 0 has a special meaning, but otherwise the same rules as AA32. */ |
| if (r->cp == 0) { |
| break; |
| } |
| /* fall through */ |
| case ARM_CP_STATE_AA32: |
| if (arm_feature(&cpu->env, ARM_FEATURE_V8) && |
| !arm_feature(&cpu->env, ARM_FEATURE_M)) { |
| assert(r->cp >= 14 && r->cp <= 15); |
| } else { |
| assert(r->cp < 8 || (r->cp >= 14 && r->cp <= 15)); |
| } |
| break; |
| case ARM_CP_STATE_AA64: |
| assert(r->cp == 0 || r->cp == CP_REG_ARM64_SYSREG_CP); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| /* |
| * The AArch64 pseudocode CheckSystemAccess() specifies that op1 |
| * encodes a minimum access level for the register. We roll this |
| * runtime check into our general permission check code, so check |
| * here that the reginfo's specified permissions are strict enough |
| * to encompass the generic architectural permission check. |
| */ |
| if (r->state != ARM_CP_STATE_AA32) { |
| CPAccessRights mask; |
| switch (r->opc1) { |
| case 0: |
| /* min_EL EL1, but some accessible to EL0 via kernel ABI */ |
| mask = PL0U_R | PL1_RW; |
| break; |
| case 1: case 2: |
| /* min_EL EL1 */ |
| mask = PL1_RW; |
| break; |
| case 3: |
| /* min_EL EL0 */ |
| mask = PL0_RW; |
| break; |
| case 4: |
| case 5: |
| /* min_EL EL2 */ |
| mask = PL2_RW; |
| break; |
| case 6: |
| /* min_EL EL3 */ |
| mask = PL3_RW; |
| break; |
| case 7: |
| /* min_EL EL1, secure mode only (we don't check the latter) */ |
| mask = PL1_RW; |
| break; |
| default: |
| /* broken reginfo with out-of-range opc1 */ |
| g_assert_not_reached(); |
| } |
| /* assert our permissions are not too lax (stricter is fine) */ |
| assert((r->access & ~mask) == 0); |
| } |
| |
| /* |
| * Check that the register definition has enough info to handle |
| * reads and writes if they are permitted. |
| */ |
| if (!(r->type & (ARM_CP_SPECIAL_MASK | ARM_CP_CONST))) { |
| if (r->access & PL3_R) { |
| assert((r->fieldoffset || |
| (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) || |
| r->readfn); |
| } |
| if (r->access & PL3_W) { |
| assert((r->fieldoffset || |
| (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) || |
| r->writefn); |
| } |
| } |
| |
| for (crm = crmmin; crm <= crmmax; crm++) { |
| for (opc1 = opc1min; opc1 <= opc1max; opc1++) { |
| for (opc2 = opc2min; opc2 <= opc2max; opc2++) { |
| for (state = ARM_CP_STATE_AA32; |
| state <= ARM_CP_STATE_AA64; state++) { |
| if (r->state != state && r->state != ARM_CP_STATE_BOTH) { |
| continue; |
| } |
| if (state == ARM_CP_STATE_AA32) { |
| /* |
| * Under AArch32 CP registers can be common |
| * (same for secure and non-secure world) or banked. |
| */ |
| char *name; |
| |
| switch (r->secure) { |
| case ARM_CP_SECSTATE_S: |
| case ARM_CP_SECSTATE_NS: |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| r->secure, crm, opc1, opc2, |
| r->name); |
| break; |
| case ARM_CP_SECSTATE_BOTH: |
| name = g_strdup_printf("%s_S", r->name); |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| ARM_CP_SECSTATE_S, |
| crm, opc1, opc2, name); |
| g_free(name); |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| ARM_CP_SECSTATE_NS, |
| crm, opc1, opc2, r->name); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } else { |
| /* |
| * AArch64 registers get mapped to non-secure instance |
| * of AArch32 |
| */ |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| ARM_CP_SECSTATE_NS, |
| crm, opc1, opc2, r->name); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| /* Define a whole list of registers */ |
| void define_arm_cp_regs_with_opaque_len(ARMCPU *cpu, const ARMCPRegInfo *regs, |
| void *opaque, size_t len) |
| { |
| size_t i; |
| for (i = 0; i < len; ++i) { |
| define_one_arm_cp_reg_with_opaque(cpu, regs + i, opaque); |
| } |
| } |
| |
| /* |
| * Modify ARMCPRegInfo for access from userspace. |
| * |
| * This is a data driven modification directed by |
| * ARMCPRegUserSpaceInfo. All registers become ARM_CP_CONST as |
| * user-space cannot alter any values and dynamic values pertaining to |
| * execution state are hidden from user space view anyway. |
| */ |
| void modify_arm_cp_regs_with_len(ARMCPRegInfo *regs, size_t regs_len, |
| const ARMCPRegUserSpaceInfo *mods, |
| size_t mods_len) |
| { |
| for (size_t mi = 0; mi < mods_len; ++mi) { |
| const ARMCPRegUserSpaceInfo *m = mods + mi; |
| GPatternSpec *pat = NULL; |
| |
| if (m->is_glob) { |
| pat = g_pattern_spec_new(m->name); |
| } |
| for (size_t ri = 0; ri < regs_len; ++ri) { |
| ARMCPRegInfo *r = regs + ri; |
| |
| if (pat && g_pattern_match_string(pat, r->name)) { |
| r->type = ARM_CP_CONST; |
| r->access = PL0U_R; |
| r->resetvalue = 0; |
| /* continue */ |
| } else if (strcmp(r->name, m->name) == 0) { |
| r->type = ARM_CP_CONST; |
| r->access = PL0U_R; |
| r->resetvalue &= m->exported_bits; |
| r->resetvalue |= m->fixed_bits; |
| break; |
| } |
| } |
| if (pat) { |
| g_pattern_spec_free(pat); |
| } |
| } |
| } |
| |
| const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp) |
| { |
| return g_hash_table_lookup(cpregs, (gpointer)(uintptr_t)encoded_cp); |
| } |
| |
| void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Helper coprocessor write function for write-ignore registers */ |
| } |
| |
| uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Helper coprocessor write function for read-as-zero registers */ |
| return 0; |
| } |
| |
| void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque) |
| { |
| /* Helper coprocessor reset function for do-nothing-on-reset registers */ |
| } |
| |
| static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) |
| { |
| /* |
| * Return true if it is not valid for us to switch to |
| * this CPU mode (ie all the UNPREDICTABLE cases in |
| * the ARM ARM CPSRWriteByInstr pseudocode). |
| */ |
| |
| /* Changes to or from Hyp via MSR and CPS are illegal. */ |
| if (write_type == CPSRWriteByInstr && |
| ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_HYP || |
| mode == ARM_CPU_MODE_HYP)) { |
| return 1; |
| } |
| |
| switch (mode) { |
| case ARM_CPU_MODE_USR: |
| return 0; |
| case ARM_CPU_MODE_SYS: |
| case ARM_CPU_MODE_SVC: |
| case ARM_CPU_MODE_ABT: |
| case ARM_CPU_MODE_UND: |
| case ARM_CPU_MODE_IRQ: |
| case ARM_CPU_MODE_FIQ: |
| /* |
| * Note that we don't implement the IMPDEF NSACR.RFR which in v7 |
| * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.) |
| */ |
| /* |
| * If HCR.TGE is set then changes from Monitor to NS PL1 via MSR |
| * and CPS are treated as illegal mode changes. |
| */ |
| if (write_type == CPSRWriteByInstr && |
| (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON && |
| (arm_hcr_el2_eff(env) & HCR_TGE)) { |
| return 1; |
| } |
| return 0; |
| case ARM_CPU_MODE_HYP: |
| return !arm_is_el2_enabled(env) || arm_current_el(env) < 2; |
| case ARM_CPU_MODE_MON: |
| return arm_current_el(env) < 3; |
| default: |
| return 1; |
| } |
| } |
| |
| uint32_t cpsr_read(CPUARMState *env) |
| { |
| int ZF; |
| ZF = (env->ZF == 0); |
| return env->uncached_cpsr | (env->NF & 0x80000000) | (ZF << 30) | |
| (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27) |
| | (env->thumb << 5) | ((env->condexec_bits & 3) << 25) |
| | ((env->condexec_bits & 0xfc) << 8) |
| | (env->GE << 16) | (env->daif & CPSR_AIF); |
| } |
| |
| void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, |
| CPSRWriteType write_type) |
| { |
| uint32_t changed_daif; |
| bool rebuild_hflags = (write_type != CPSRWriteRaw) && |
| (mask & (CPSR_M | CPSR_E | CPSR_IL)); |
| |
| if (mask & CPSR_NZCV) { |
| env->ZF = (~val) & CPSR_Z; |
| env->NF = val; |
| env->CF = (val >> 29) & 1; |
| env->VF = (val << 3) & 0x80000000; |
| } |
| if (mask & CPSR_Q) { |
| env->QF = ((val & CPSR_Q) != 0); |
| } |
| if (mask & CPSR_T) { |
| env->thumb = ((val & CPSR_T) != 0); |
| } |
| if (mask & CPSR_IT_0_1) { |
| env->condexec_bits &= ~3; |
| env->condexec_bits |= (val >> 25) & 3; |
| } |
| if (mask & CPSR_IT_2_7) { |
| env->condexec_bits &= 3; |
| env->condexec_bits |= (val >> 8) & 0xfc; |
| } |
| if (mask & CPSR_GE) { |
| env->GE = (val >> 16) & 0xf; |
| } |
| |
| /* |
| * In a V7 implementation that includes the security extensions but does |
| * not include Virtualization Extensions the SCR.FW and SCR.AW bits control |
| * whether non-secure software is allowed to change the CPSR_F and CPSR_A |
| * bits respectively. |
| * |
| * In a V8 implementation, it is permitted for privileged software to |
| * change the CPSR A/F bits regardless of the SCR.AW/FW bits. |
| */ |
| if (write_type != CPSRWriteRaw && !arm_feature(env, ARM_FEATURE_V8) && |
| arm_feature(env, ARM_FEATURE_EL3) && |
| !arm_feature(env, ARM_FEATURE_EL2) && |
| !arm_is_secure(env)) { |
| |
| changed_daif = (env->daif ^ val) & mask; |
| |
| if (changed_daif & CPSR_A) { |
| /* |
| * Check to see if we are allowed to change the masking of async |
| * abort exceptions from a non-secure state. |
| */ |
| if (!(env->cp15.scr_el3 & SCR_AW)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Ignoring attempt to switch CPSR_A flag from " |
| "non-secure world with SCR.AW bit clear\n"); |
| mask &= ~CPSR_A; |
| } |
| } |
| |
| if (changed_daif & CPSR_F) { |
| /* |
| * Check to see if we are allowed to change the masking of FIQ |
| * exceptions from a non-secure state. |
| */ |
| if (!(env->cp15.scr_el3 & SCR_FW)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Ignoring attempt to switch CPSR_F flag from " |
| "non-secure world with SCR.FW bit clear\n"); |
| mask &= ~CPSR_F; |
| } |
| |
| /* |
| * Check whether non-maskable FIQ (NMFI) support is enabled. |
| * If this bit is set software is not allowed to mask |
| * FIQs, but is allowed to set CPSR_F to 0. |
| */ |
| if ((A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_NMFI) && |
| (val & CPSR_F)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Ignoring attempt to enable CPSR_F flag " |
| "(non-maskable FIQ [NMFI] support enabled)\n"); |
| mask &= ~CPSR_F; |
| } |
| } |
| } |
| |
| env->daif &= ~(CPSR_AIF & mask); |
| env->daif |= val & CPSR_AIF & mask; |
| |
| if (write_type != CPSRWriteRaw && |
| ((env->uncached_cpsr ^ val) & mask & CPSR_M)) { |
| if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) { |
| /* |
| * Note that we can only get here in USR mode if this is a |
| * gdb stub write; for this case we follow the architectural |
| * behaviour for guest writes in USR mode of ignoring an attempt |
| * to switch mode. (Those are caught by translate.c for writes |
| * triggered by guest instructions.) |
| */ |
| mask &= ~CPSR_M; |
| } else if (bad_mode_switch(env, val & CPSR_M, write_type)) { |
| /* |
| * Attempt to switch to an invalid mode: this is UNPREDICTABLE in |
| * v7, and has defined behaviour in v8: |
| * + leave CPSR.M untouched |
| * + allow changes to the other CPSR fields |
| * + set PSTATE.IL |
| * For user changes via the GDB stub, we don't set PSTATE.IL, |
| * as this would be unnecessarily harsh for a user error. |
| */ |
| mask &= ~CPSR_M; |
| if (write_type != CPSRWriteByGDBStub && |
| arm_feature(env, ARM_FEATURE_V8)) { |
| mask |= CPSR_IL; |
| val |= CPSR_IL; |
| } |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Illegal AArch32 mode switch attempt from %s to %s\n", |
| aarch32_mode_name(env->uncached_cpsr), |
| aarch32_mode_name(val)); |
| } else { |
| qemu_log_mask(CPU_LOG_INT, "%s %s to %s PC 0x%" PRIx32 "\n", |
| write_type == CPSRWriteExceptionReturn ? |
| "Exception return from AArch32" : |
| "AArch32 mode switch from", |
| aarch32_mode_name(env->uncached_cpsr), |
| aarch32_mode_name(val), env->regs[15]); |
| switch_mode(env, val & CPSR_M); |
| } |
| } |
| mask &= ~CACHED_CPSR_BITS; |
| env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask); |
| if (rebuild_hflags) { |
| arm_rebuild_hflags(env); |
| } |
| } |
| |
| /* Sign/zero extend */ |
| uint32_t HELPER(sxtb16)(uint32_t x) |
| { |
| uint32_t res; |
| res = (uint16_t)(int8_t)x; |
| res |= (uint32_t)(int8_t)(x >> 16) << 16; |
| return res; |
| } |
| |
| static void handle_possible_div0_trap(CPUARMState *env, uintptr_t ra) |
| { |
| /* |
| * Take a division-by-zero exception if necessary; otherwise return |
| * to get the usual non-trapping division behaviour (result of 0) |
| */ |
| if (arm_feature(env, ARM_FEATURE_M) |
| && (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_DIV_0_TRP_MASK)) { |
| raise_exception_ra(env, EXCP_DIVBYZERO, 0, 1, ra); |
| } |
| } |
| |
| uint32_t HELPER(uxtb16)(uint32_t x) |
| { |
| uint32_t res; |
| res = (uint16_t)(uint8_t)x; |
| res |= (uint32_t)(uint8_t)(x >> 16) << 16; |
| return res; |
| } |
| |
| int32_t HELPER(sdiv)(CPUARMState *env, int32_t num, int32_t den) |
| { |
| if (den == 0) { |
| handle_possible_div0_trap(env, GETPC()); |
| return 0; |
| } |
| if (num == INT_MIN && den == -1) { |
| return INT_MIN; |
| } |
| return num / den; |
| } |
| |
| uint32_t HELPER(udiv)(CPUARMState *env, uint32_t num, uint32_t den) |
| { |
| if (den == 0) { |
| handle_possible_div0_trap(env, GETPC()); |
| return 0; |
| } |
| return num / den; |
| } |
| |
| uint32_t HELPER(rbit)(uint32_t x) |
| { |
| return revbit32(x); |
| } |
| |
| #ifdef CONFIG_USER_ONLY |
| |
| static void switch_mode(CPUARMState *env, int mode) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (mode != ARM_CPU_MODE_USR) { |
| cpu_abort(CPU(cpu), "Tried to switch out of user mode\n"); |
| } |
| } |
| |
| uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, |
| uint32_t cur_el, bool secure) |
| { |
| return 1; |
| } |
| |
| void aarch64_sync_64_to_32(CPUARMState *env) |
| { |
| g_assert_not_reached(); |
| } |
| |
| #else |
| |
| static void switch_mode(CPUARMState *env, int mode) |
| { |
| int old_mode; |
| int i; |
| |
| old_mode = env->uncached_cpsr & CPSR_M; |
| if (mode == old_mode) { |
| return; |
| } |
| |
| if (old_mode == ARM_CPU_MODE_FIQ) { |
| memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); |
| memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); |
| } else if (mode == ARM_CPU_MODE_FIQ) { |
| memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); |
| memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); |
| } |
| |
| i = bank_number(old_mode); |
| env->banked_r13[i] = env->regs[13]; |
| env->banked_spsr[i] = env->spsr; |
| |
| i = bank_number(mode); |
| env->regs[13] = env->banked_r13[i]; |
| env->spsr = env->banked_spsr[i]; |
| |
| env->banked_r14[r14_bank_number(old_mode)] = env->regs[14]; |
| env->regs[14] = env->banked_r14[r14_bank_number(mode)]; |
| } |
| |
| /* |
| * Physical Interrupt Target EL Lookup Table |
| * |
| * [ From ARM ARM section G1.13.4 (Table G1-15) ] |
| * |
| * The below multi-dimensional table is used for looking up the target |
| * exception level given numerous condition criteria. Specifically, the |
| * target EL is based on SCR and HCR routing controls as well as the |
| * currently executing EL and secure state. |
| * |
| * Dimensions: |
| * target_el_table[2][2][2][2][2][4] |
| * | | | | | +--- Current EL |
| * | | | | +------ Non-secure(0)/Secure(1) |
| * | | | +--------- HCR mask override |
| * | | +------------ SCR exec state control |
| * | +--------------- SCR mask override |
| * +------------------ 32-bit(0)/64-bit(1) EL3 |
| * |
| * The table values are as such: |
| * 0-3 = EL0-EL3 |
| * -1 = Cannot occur |
| * |
| * The ARM ARM target EL table includes entries indicating that an "exception |
| * is not taken". The two cases where this is applicable are: |
| * 1) An exception is taken from EL3 but the SCR does not have the exception |
| * routed to EL3. |
| * 2) An exception is taken from EL2 but the HCR does not have the exception |
| * routed to EL2. |
| * In these two cases, the below table contain a target of EL1. This value is |
| * returned as it is expected that the consumer of the table data will check |
| * for "target EL >= current EL" to ensure the exception is not taken. |
| * |
| * SCR HCR |
| * 64 EA AMO From |
| * BIT IRQ IMO Non-secure Secure |
| * EL3 FIQ RW FMO EL0 EL1 EL2 EL3 EL0 EL1 EL2 EL3 |
| */ |
| static const int8_t target_el_table[2][2][2][2][2][4] = { |
| {{{{/* 0 0 0 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 0 0 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},}, |
| {{/* 0 0 1 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 0 1 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},},}, |
| {{{/* 0 1 0 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 1 0 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},}, |
| {{/* 0 1 1 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 1 1 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},},},}, |
| {{{{/* 1 0 0 0 */{ 1, 1, 2, -1 },{ 1, 1, -1, 1 },}, |
| {/* 1 0 0 1 */{ 2, 2, 2, -1 },{ 2, 2, -1, 1 },},}, |
| {{/* 1 0 1 0 */{ 1, 1, 1, -1 },{ 1, 1, 1, 1 },}, |
| {/* 1 0 1 1 */{ 2, 2, 2, -1 },{ 2, 2, 2, 1 },},},}, |
| {{{/* 1 1 0 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },}, |
| {/* 1 1 0 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},}, |
| {{/* 1 1 1 0 */{ 3, 3, 3, -1 },{ 3, 3, 3, 3 },}, |
| {/* 1 1 1 1 */{ 3, 3, 3, -1 },{ 3, 3, 3, 3 },},},},}, |
| }; |
| |
| /* |
| * Determine the target EL for physical exceptions |
| */ |
| uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, |
| uint32_t cur_el, bool secure) |
| { |
| CPUARMState *env = cs->env_ptr; |
| bool rw; |
| bool scr; |
| bool hcr; |
| int target_el; |
| /* Is the highest EL AArch64? */ |
| bool is64 = arm_feature(env, ARM_FEATURE_AARCH64); |
| uint64_t hcr_el2; |
| |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW); |
| } else { |
| /* |
| * Either EL2 is the highest EL (and so the EL2 register width |
| * is given by is64); or there is no EL2 or EL3, in which case |
| * the value of 'rw' does not affect the table lookup anyway. |
| */ |
| rw = is64; |
| } |
| |
| hcr_el2 = arm_hcr_el2_eff(env); |
| switch (excp_idx) { |
| case EXCP_IRQ: |
| scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ); |
| hcr = hcr_el2 & HCR_IMO; |
| break; |
| case EXCP_FIQ: |
| scr = ((env->cp15.scr_el3 & SCR_FIQ) == SCR_FIQ); |
| hcr = hcr_el2 & HCR_FMO; |
| break; |
| default: |
| scr = ((env->cp15.scr_el3 & SCR_EA) == SCR_EA); |
| hcr = hcr_el2 & HCR_AMO; |
| break; |
| }; |
| |
| /* |
| * For these purposes, TGE and AMO/IMO/FMO both force the |
| * interrupt to EL2. Fold TGE into the bit extracted above. |
| */ |
| hcr |= (hcr_el2 & HCR_TGE) != 0; |
| |
| /* Perform a table-lookup for the target EL given the current state */ |
| target_el = target_el_table[is64][scr][rw][hcr][secure][cur_el]; |
| |
| assert(target_el > 0); |
| |
| return target_el; |
| } |
| |
| void arm_log_exception(CPUState *cs) |
| { |
| int idx = cs->exception_index; |
| |
| if (qemu_loglevel_mask(CPU_LOG_INT)) { |
| const char *exc = NULL; |
| static const char * const excnames[] = { |
| [EXCP_UDEF] = "Undefined Instruction", |
| [EXCP_SWI] = "SVC", |
| [EXCP_PREFETCH_ABORT] = "Prefetch Abort", |
| [EXCP_DATA_ABORT] = "Data Abort", |
| [EXCP_IRQ] = "IRQ", |
| [EXCP_FIQ] = "FIQ", |
| [EXCP_BKPT] = "Breakpoint", |
| [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", |
| [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", |
| [EXCP_HVC] = "Hypervisor Call", |
| [EXCP_HYP_TRAP] = "Hypervisor Trap", |
| [EXCP_SMC] = "Secure Monitor Call", |
| [EXCP_VIRQ] = "Virtual IRQ", |
| [EXCP_VFIQ] = "Virtual FIQ", |
| [EXCP_SEMIHOST] = "Semihosting call", |
| [EXCP_NOCP] = "v7M NOCP UsageFault", |
| [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", |
| [EXCP_STKOF] = "v8M STKOF UsageFault", |
| [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", |
| [EXCP_LSERR] = "v8M LSERR UsageFault", |
| [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", |
| [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", |
| [EXCP_VSERR] = "Virtual SERR", |
| }; |
| |
| if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { |
| exc = excnames[idx]; |
| } |
| if (!exc) { |
| exc = "unknown"; |
| } |
| qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s] on CPU %d\n", |
| idx, exc, cs->cpu_index); |
| } |
| } |
| |
| /* |
| * Function used to synchronize QEMU's AArch64 register set with AArch32 |
| * register set. This is necessary when switching between AArch32 and AArch64 |
| * execution state. |
| */ |
| void aarch64_sync_32_to_64(CPUARMState *env) |
| { |
| int i; |
| uint32_t mode = env->uncached_cpsr & CPSR_M; |
| |
| /* We can blanket copy R[0:7] to X[0:7] */ |
| for (i = 0; i < 8; i++) { |
| env->xregs[i] = env->regs[i]; |
| } |
| |
| /* |
| * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12. |
| * Otherwise, they come from the banked user regs. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 8; i < 13; i++) { |
| env->xregs[i] = env->usr_regs[i - 8]; |
| } |
| } else { |
| for (i = 8; i < 13; i++) { |
| env->xregs[i] = env->regs[i]; |
| } |
| } |
| |
| /* |
| * Registers x13-x23 are the various mode SP and FP registers. Registers |
| * r13 and r14 are only copied if we are in that mode, otherwise we copy |
| * from the mode banked register. |
| */ |
| if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) { |
| env->xregs[13] = env->regs[13]; |
| env->xregs[14] = env->regs[14]; |
| } else { |
| env->xregs[13] = env->banked_r13[bank_number(ARM_CPU_MODE_USR)]; |
| /* HYP is an exception in that it is copied from r14 */ |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->xregs[14] = env->regs[14]; |
| } else { |
| env->xregs[14] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)]; |
| } |
| } |
| |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->xregs[15] = env->regs[13]; |
| } else { |
| env->xregs[15] = env->banked_r13[bank_number(ARM_CPU_MODE_HYP)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_IRQ) { |
| env->xregs[16] = env->regs[14]; |
| env->xregs[17] = env->regs[13]; |
| } else { |
| env->xregs[16] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)]; |
| env->xregs[17] = env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_SVC) { |
| env->xregs[18] = env->regs[14]; |
| env->xregs[19] = env->regs[13]; |
| } else { |
| env->xregs[18] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)]; |
| env->xregs[19] = env->banked_r13[bank_number(ARM_CPU_MODE_SVC)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_ABT) { |
| env->xregs[20] = env->regs[14]; |
| env->xregs[21] = env->regs[13]; |
| } else { |
| env->xregs[20] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)]; |
| env->xregs[21] = env->banked_r13[bank_number(ARM_CPU_MODE_ABT)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_UND) { |
| env->xregs[22] = env->regs[14]; |
| env->xregs[23] = env->regs[13]; |
| } else { |
| env->xregs[22] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)]; |
| env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)]; |
| } |
| |
| /* |
| * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ |
| * mode, then we can copy from r8-r14. Otherwise, we copy from the |
| * FIQ bank for r8-r14. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 24; i < 31; i++) { |
| env->xregs[i] = env->regs[i - 16]; /* X[24:30] <- R[8:14] */ |
| } |
| } else { |
| for (i = 24; i < 29; i++) { |
| env->xregs[i] = env->fiq_regs[i - 24]; |
| } |
| env->xregs[29] = env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)]; |
| env->xregs[30] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)]; |
| } |
| |
| env->pc = env->regs[15]; |
| } |
| |
| /* |
| * Function used to synchronize QEMU's AArch32 register set with AArch64 |
| * register set. This is necessary when switching between AArch32 and AArch64 |
| * execution state. |
| */ |
| void aarch64_sync_64_to_32(CPUARMState *env) |
| { |
| int i; |
| uint32_t mode = env->uncached_cpsr & CPSR_M; |
| |
| /* We can blanket copy X[0:7] to R[0:7] */ |
| for (i = 0; i < 8; i++) { |
| env->regs[i] = env->xregs[i]; |
| } |
| |
| /* |
| * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12. |
| * Otherwise, we copy x8-x12 into the banked user regs. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 8; i < 13; i++) { |
| env->usr_regs[i - 8] = env->xregs[i]; |
| } |
| } else { |
| for (i = 8; i < 13; i++) { |
| env->regs[i] = env->xregs[i]; |
| } |
| } |
| |
| /* |
| * Registers r13 & r14 depend on the current mode. |
| * If we are in a given mode, we copy the corresponding x registers to r13 |
| * and r14. Otherwise, we copy the x register to the banked r13 and r14 |
| * for the mode. |
| */ |
| if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) { |
| env->regs[13] = env->xregs[13]; |
| env->regs[14] = env->xregs[14]; |
| } else { |
| env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13]; |
| |
| /* |
| * HYP is an exception in that it does not have its own banked r14 but |
| * shares the USR r14 |
| */ |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->regs[14] = env->xregs[14]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)] = env->xregs[14]; |
| } |
| } |
| |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->regs[13] = env->xregs[15]; |
| } else { |
| env->banked_r13[bank_number(ARM_CPU_MODE_HYP)] = env->xregs[15]; |
| } |
| |
| if (mode == ARM_CPU_MODE_IRQ) { |
| env->regs[14] = env->xregs[16]; |
| env->regs[13] = env->xregs[17]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[16]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[17]; |
| } |
| |
| if (mode == ARM_CPU_MODE_SVC) { |
| env->regs[14] = env->xregs[18]; |
| env->regs[13] = env->xregs[19]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)] = env->xregs[18]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_SVC)] = env->xregs[19]; |
| } |
| |
| if (mode == ARM_CPU_MODE_ABT) { |
| env->regs[14] = env->xregs[20]; |
| env->regs[13] = env->xregs[21]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)] = env->xregs[20]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_ABT)] = env->xregs[21]; |
| } |
| |
| if (mode == ARM_CPU_MODE_UND) { |
| env->regs[14] = env->xregs[22]; |
| env->regs[13] = env->xregs[23]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)] = env->xregs[22]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23]; |
| } |
| |
| /* |
| * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ |
| * mode, then we can copy to r8-r14. Otherwise, we copy to the |
| * FIQ bank for r8-r14. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 24; i < 31; i++) { |
| env->regs[i - 16] = env->xregs[i]; /* X[24:30] -> R[8:14] */ |
| } |
| } else { |
| for (i = 24; i < 29; i++) { |
| env->fiq_regs[i - 24] = env->xregs[i]; |
| } |
| env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[29]; |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[30]; |
| } |
| |
| env->regs[15] = env->pc; |
| } |
| |
| static void take_aarch32_exception(CPUARMState *env, int new_mode, |
| uint32_t mask, uint32_t offset, |
| uint32_t newpc) |
| { |
| int new_el; |
| |
| /* Change the CPU state so as to actually take the exception. */ |
| switch_mode(env, new_mode); |
| |
| /* |
| * For exceptions taken to AArch32 we must clear the SS bit in both |
| * PSTATE and in the old-state value we save to SPSR_<mode>, so zero it now. |
| */ |
| env->pstate &= ~PSTATE_SS; |
| env->spsr = cpsr_read(env); |
| /* Clear IT bits. */ |
| env->condexec_bits = 0; |
| /* Switch to the new mode, and to the correct instruction set. */ |
| env->uncached_cpsr = (env->uncached_cpsr & ~CPSR_M) | new_mode; |
| |
| /* This must be after mode switching. */ |
| new_el = arm_current_el(env); |
| |
| /* Set new mode endianness */ |
| env->uncached_cpsr &= ~CPSR_E; |
| if (env->cp15.sctlr_el[new_el] & SCTLR_EE) { |
| env->uncached_cpsr |= CPSR_E; |
| } |
| /* J and IL must always be cleared for exception entry */ |
| env->uncached_cpsr &= ~(CPSR_IL | CPSR_J); |
| env->daif |= mask; |
| |
| if (cpu_isar_feature(aa32_ssbs, env_archcpu(env))) { |
| if (env->cp15.sctlr_el[new_el] & SCTLR_DSSBS_32) { |
| env->uncached_cpsr |= CPSR_SSBS; |
| } else { |
| env->uncached_cpsr &= ~CPSR_SSBS; |
| } |
| } |
| |
| if (new_mode == ARM_CPU_MODE_HYP) { |
| env->thumb = (env->cp15.sctlr_el[2] & SCTLR_TE) != 0; |
| env->elr_el[2] = env->regs[15]; |
| } else { |
| /* CPSR.PAN is normally preserved preserved unless... */ |
| if (cpu_isar_feature(aa32_pan, env_archcpu(env))) { |
| switch (new_el) { |
| case 3: |
| if (!arm_is_secure_below_el3(env)) { |
| /* ... the target is EL3, from non-secure state. */ |
| env->uncached_cpsr &= ~CPSR_PAN; |
| break; |
| } |
| /* ... the target is EL3, from secure state ... */ |
| /* fall through */ |
| case 1: |
| /* ... the target is EL1 and SCTLR.SPAN is 0. */ |
| if (!(env->cp15.sctlr_el[new_el] & SCTLR_SPAN)) { |
| env->uncached_cpsr |= CPSR_PAN; |
| } |
| break; |
| } |
| } |
| /* |
| * this is a lie, as there was no c1_sys on V4T/V5, but who cares |
| * and we should just guard the thumb mode on V4 |
| */ |
| if (arm_feature(env, ARM_FEATURE_V4T)) { |
| env->thumb = |
| (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_TE) != 0; |
| } |
| env->regs[14] = env->regs[15] + offset; |
| } |
| env->regs[15] = newpc; |
| arm_rebuild_hflags(env); |
| } |
| |
| static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) |
| { |
| /* |
| * Handle exception entry to Hyp mode; this is sufficiently |
| * different to entry to other AArch32 modes that we handle it |
| * separately here. |
| * |
| * The vector table entry used is always the 0x14 Hyp mode entry point, |
| * unless this is an UNDEF/SVC/HVC/abort taken from Hyp to Hyp. |
| * The offset applied to the preferred return address is always zero |
| * (see DDI0487C.a section G1.12.3). |
| * PSTATE A/I/F masks are set based only on the SCR.EA/IRQ/FIQ values. |
| */ |
| uint32_t addr, mask; |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| switch (cs->exception_index) { |
| case EXCP_UDEF: |
| addr = 0x04; |
| break; |
| case EXCP_SWI: |
| addr = 0x08; |
| break; |
| case EXCP_BKPT: |
| /* Fall through to prefetch abort. */ |
| case EXCP_PREFETCH_ABORT: |
| env->cp15.ifar_s = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, "...with HIFAR 0x%x\n", |
| (uint32_t)env->exception.vaddress); |
| addr = 0x0c; |
| break; |
| case EXCP_DATA_ABORT: |
| env->cp15.dfar_s = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, "...with HDFAR 0x%x\n", |
| (uint32_t)env->exception.vaddress); |
| addr = 0x10; |
| break; |
| case EXCP_IRQ: |
| addr = 0x18; |
| break; |
| case EXCP_FIQ: |
| addr = 0x1c; |
| break; |
| case EXCP_HVC: |
| addr = 0x08; |
| break; |
| case EXCP_HYP_TRAP: |
| addr = 0x14; |
| break; |
| default: |
| cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); |
| } |
| |
| if (cs->exception_index != EXCP_IRQ && cs->exception_index != EXCP_FIQ) { |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| /* |
| * QEMU syndrome values are v8-style. v7 has the IL bit |
| * UNK/SBZP for "field not valid" cases, where v8 uses RES1. |
| * If this is a v7 CPU, squash the IL bit in those cases. |
| */ |
| if (cs->exception_index == EXCP_PREFETCH_ABORT || |
| (cs->exception_index == EXCP_DATA_ABORT && |
| !(env->exception.syndrome & ARM_EL_ISV)) || |
| syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { |
| env->exception.syndrome &= ~ARM_EL_IL; |
| } |
| } |
| env->cp15.esr_el[2] = env->exception.syndrome; |
| } |
| |
| if (arm_current_el(env) != 2 && addr < 0x14) { |
| addr = 0x14; |
| } |
| |
| mask = 0; |
| if (!(env->cp15.scr_el3 & SCR_EA)) { |
| mask |= CPSR_A; |
| } |
| if (!(env->cp15.scr_el3 & SCR_IRQ)) { |
| mask |= CPSR_I; |
| } |
| if (!(env->cp15.scr_el3 & SCR_FIQ)) { |
| mask |= CPSR_F; |
| } |
| |
| addr += env->cp15.hvbar; |
| |
| take_aarch32_exception(env, ARM_CPU_MODE_HYP, mask, 0, addr); |
| } |
| |
| static void arm_cpu_do_interrupt_aarch32(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| uint32_t addr; |
| uint32_t mask; |
| int new_mode; |
| uint32_t offset; |
| uint32_t moe; |
| |
| /* If this is a debug exception we must update the DBGDSCR.MOE bits */ |
| switch (syn_get_ec(env->exception.syndrome)) { |
| case EC_BREAKPOINT: |
| case EC_BREAKPOINT_SAME_EL: |
| moe = 1; |
| break; |
| case EC_WATCHPOINT: |
| case EC_WATCHPOINT_SAME_EL: |
| moe = 10; |
| break; |
| case EC_AA32_BKPT: |
| moe = 3; |
| break; |
| case EC_VECTORCATCH: |
| moe = 5; |
| break; |
| default: |
| moe = 0; |
| break; |
| } |
| |
| if (moe) { |
| env->cp15.mdscr_el1 = deposit64(env->cp15.mdscr_el1, 2, 4, moe); |
| } |
| |
| if (env->exception.target_el == 2) { |
| arm_cpu_do_interrupt_aarch32_hyp(cs); |
| return; |
| } |
| |
| switch (cs->exception_index) { |
| case EXCP_UDEF: |
| new_mode = ARM_CPU_MODE_UND; |
| addr = 0x04; |
| mask = CPSR_I; |
| if (env->thumb) { |
| offset = 2; |
| } else { |
| offset = 4; |
| } |
| break; |
| case EXCP_SWI: |
| new_mode = ARM_CPU_MODE_SVC; |
| addr = 0x08; |
| mask = CPSR_I; |
| /* The PC already points to the next instruction. */ |
| offset = 0; |
| break; |
| case EXCP_BKPT: |
| /* Fall through to prefetch abort. */ |
| case EXCP_PREFETCH_ABORT: |
| A32_BANKED_CURRENT_REG_SET(env, ifsr, env->exception.fsr); |
| A32_BANKED_CURRENT_REG_SET(env, ifar, env->exception.vaddress); |
| qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x IFAR 0x%x\n", |
| env->exception.fsr, (uint32_t)env->exception.vaddress); |
| new_mode = ARM_CPU_MODE_ABT; |
| addr = 0x0c; |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| break; |
| case EXCP_DATA_ABORT: |
| A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr); |
| A32_BANKED_CURRENT_REG_SET(env, dfar, env->exception.vaddress); |
| qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n", |
| env->exception.fsr, |
| (uint32_t)env->exception.vaddress); |
| new_mode = ARM_CPU_MODE_ABT; |
| addr = 0x10; |
| mask = CPSR_A | CPSR_I; |
| offset = 8; |
| break; |
| case EXCP_IRQ: |
| new_mode = ARM_CPU_MODE_IRQ; |
| addr = 0x18; |
| /* Disable IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| if (env->cp15.scr_el3 & SCR_IRQ) { |
| /* IRQ routed to monitor mode */ |
| new_mode = ARM_CPU_MODE_MON; |
| mask |= CPSR_F; |
| } |
| break; |
| case EXCP_FIQ: |
| new_mode = ARM_CPU_MODE_FIQ; |
| addr = 0x1c; |
| /* Disable FIQ, IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I | CPSR_F; |
| if (env->cp15.scr_el3 & SCR_FIQ) { |
| /* FIQ routed to monitor mode */ |
| new_mode = ARM_CPU_MODE_MON; |
| } |
| offset = 4; |
| break; |
| case EXCP_VIRQ: |
| new_mode = ARM_CPU_MODE_IRQ; |
| addr = 0x18; |
| /* Disable IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| break; |
| case EXCP_VFIQ: |
| new_mode = ARM_CPU_MODE_FIQ; |
| addr = 0x1c; |
| /* Disable FIQ, IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I | CPSR_F; |
| offset = 4; |
| break; |
| case EXCP_VSERR: |
| { |
| /* |
| * Note that this is reported as a data abort, but the DFAR |
| * has an UNKNOWN value. Construct the SError syndrome from |
| * AET and ExT fields. |
| */ |
| ARMMMUFaultInfo fi = { .type = ARMFault_AsyncExternal, }; |
| |
| if (extended_addresses_enabled(env)) { |
| env->exception.fsr = arm_fi_to_lfsc(&fi); |
| } else { |
| env->exception.fsr = arm_fi_to_sfsc(&fi); |
| } |
| env->exception.fsr |= env->cp15.vsesr_el2 & 0xd000; |
| A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr); |
| qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x\n", |
| env->exception.fsr); |
| |
| new_mode = ARM_CPU_MODE_ABT; |
| addr = 0x10; |
| mask = CPSR_A | CPSR_I; |
| offset = 8; |
| } |
| break; |
| case EXCP_SMC: |
| new_mode = ARM_CPU_MODE_MON; |
| addr = 0x08; |
| mask = CPSR_A | CPSR_I | CPSR_F; |
| offset = 0; |
| break; |
| default: |
| cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); |
| return; /* Never happens. Keep compiler happy. */ |
| } |
| |
| if (new_mode == ARM_CPU_MODE_MON) { |
| addr += env->cp15.mvbar; |
| } else if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { |
| /* High vectors. When enabled, base address cannot be remapped. */ |
| addr += 0xffff0000; |
| } else { |
| /* |
| * ARM v7 architectures provide a vector base address register to remap |
| * the interrupt vector table. |
| * This register is only followed in non-monitor mode, and is banked. |
| * Note: only bits 31:5 are valid. |
| */ |
| addr += A32_BANKED_CURRENT_REG_GET(env, vbar); |
| } |
| |
| if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) { |
| env->cp15.scr_el3 &= ~SCR_NS; |
| } |
| |
| take_aarch32_exception(env, new_mode, mask, offset, addr); |
| } |
| |
| static int aarch64_regnum(CPUARMState *env, int aarch32_reg) |
| { |
| /* |
| * Return the register number of the AArch64 view of the AArch32 |
| * register @aarch32_reg. The CPUARMState CPSR is assumed to still |
| * be that of the AArch32 mode the exception came from. |
| */ |
| int mode = env->uncached_cpsr & CPSR_M; |
| |
| switch (aarch32_reg) { |
| case 0 ... 7: |
| return aarch32_reg; |
| case 8 ... 12: |
| return mode == ARM_CPU_MODE_FIQ ? aarch32_reg + 16 : aarch32_reg; |
| case 13: |
| switch (mode) { |
| case ARM_CPU_MODE_USR: |
| case ARM_CPU_MODE_SYS: |
| return 13; |
| case ARM_CPU_MODE_HYP: |
| return 15; |
| case ARM_CPU_MODE_IRQ: |
| return 17; |
| case ARM_CPU_MODE_SVC: |
| return 19; |
| case ARM_CPU_MODE_ABT: |
| return 21; |
| case ARM_CPU_MODE_UND: |
| return 23; |
| case ARM_CPU_MODE_FIQ: |
| return 29; |
| default: |
| g_assert_not_reached(); |
| } |
| case 14: |
| switch (mode) { |
| case ARM_CPU_MODE_USR: |
| case ARM_CPU_MODE_SYS: |
| case ARM_CPU_MODE_HYP: |
| return 14; |
| case ARM_CPU_MODE_IRQ: |
| return 16; |
| case ARM_CPU_MODE_SVC: |
| return 18; |
| case ARM_CPU_MODE_ABT: |
| return 20; |
| case ARM_CPU_MODE_UND: |
| return 22; |
| case ARM_CPU_MODE_FIQ: |
| return 30; |
| default: |
| g_assert_not_reached(); |
| } |
| case 15: |
| return 31; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static uint32_t cpsr_read_for_spsr_elx(CPUARMState *env) |
| { |
| uint32_t ret = cpsr_read(env); |
| |
| /* Move DIT to the correct location for SPSR_ELx */ |
| if (ret & CPSR_DIT) { |
| ret &= ~CPSR_DIT; |
| ret |= PSTATE_DIT; |
| } |
| /* Merge PSTATE.SS into SPSR_ELx */ |
| ret |= env->pstate & PSTATE_SS; |
| |
| return ret; |
| } |
| |
| static bool syndrome_is_sync_extabt(uint32_t syndrome) |
| { |
| /* Return true if this syndrome value is a synchronous external abort */ |
| switch (syn_get_ec(syndrome)) { |
| case EC_INSNABORT: |
| case EC_INSNABORT_SAME_EL: |
| case EC_DATAABORT: |
| case EC_DATAABORT_SAME_EL: |
| /* Look at fault status code for all the synchronous ext abort cases */ |
| switch (syndrome & 0x3f) { |
| case 0x10: |
| case 0x13: |
| case 0x14: |
| case 0x15: |
| case 0x16: |
| case 0x17: |
| return true; |
| default: |
| return false; |
| } |
| default: |
| return false; |
| } |
| } |
| |
| /* Handle exception entry to a target EL which is using AArch64 */ |
| static void arm_cpu_do_interrupt_aarch64(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| unsigned int new_el = env->exception.target_el; |
| target_ulong addr = env->cp15.vbar_el[new_el]; |
| unsigned int new_mode = aarch64_pstate_mode(new_el, true); |
| unsigned int old_mode; |
| unsigned int cur_el = arm_current_el(env); |
| int rt; |
| |
| /* |
| * Note that new_el can never be 0. If cur_el is 0, then |
| * el0_a64 is is_a64(), else el0_a64 is ignored. |
| */ |
| aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); |
| |
| if (cur_el < new_el) { |
| /* |
| * Entry vector offset depends on whether the implemented EL |
| * immediately lower than the target level is using AArch32 or AArch64 |
| */ |
| bool is_aa64; |
| uint64_t hcr; |
| |
| switch (new_el) { |
| case 3: |
| is_aa64 = (env->cp15.scr_el3 & SCR_RW) != 0; |
| break; |
| case 2: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| is_aa64 = (hcr & HCR_RW) != 0; |
| break; |
| } |
| /* fall through */ |
| case 1: |
| is_aa64 = is_a64(env); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| if (is_aa64) { |
| addr += 0x400; |
| } else { |
| addr += 0x600; |
| } |
| } else if (pstate_read(env) & PSTATE_SP) { |
| addr += 0x200; |
| } |
| |
| switch (cs->exception_index) { |
| case EXCP_PREFETCH_ABORT: |
| case EXCP_DATA_ABORT: |
| /* |
| * FEAT_DoubleFault allows synchronous external aborts taken to EL3 |
| * to be taken to the SError vector entrypoint. |
| */ |
| if (new_el == 3 && (env->cp15.scr_el3 & SCR_EASE) && |
| syndrome_is_sync_extabt(env->exception.syndrome)) { |
| addr += 0x180; |
| } |
| env->cp15.far_el[new_el] = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, "...with FAR 0x%" PRIx64 "\n", |
| env->cp15.far_el[new_el]); |
| /* fall through */ |
| case EXCP_BKPT: |
| case EXCP_UDEF: |
| case EXCP_SWI: |
| case EXCP_HVC: |
| case EXCP_HYP_TRAP: |
| case EXCP_SMC: |
| switch (syn_get_ec(env->exception.syndrome)) { |
| case EC_ADVSIMDFPACCESSTRAP: |
| /* |
| * QEMU internal FP/SIMD syndromes from AArch32 include the |
| * TA and coproc fields which are only exposed if the exception |
| * is taken to AArch32 Hyp mode. Mask them out to get a valid |
| * AArch64 format syndrome. |
| */ |
| env->exception.syndrome &= ~MAKE_64BIT_MASK(0, 20); |
| break; |
| case EC_CP14RTTRAP: |
| case EC_CP15RTTRAP: |
| case EC_CP14DTTRAP: |
| /* |
| * For a trap on AArch32 MRC/MCR/LDC/STC the Rt field is currently |
| * the raw register field from the insn; when taking this to |
| * AArch64 we must convert it to the AArch64 view of the register |
| * number. Notice that we read a 4-bit AArch32 register number and |
| * write back a 5-bit AArch64 one. |
| */ |
| rt = extract32(env->exception.syndrome, 5, 4); |
| rt = aarch64_regnum(env, rt); |
| env->exception.syndrome = deposit32(env->exception.syndrome, |
| 5, 5, rt); |
| break; |
| case EC_CP15RRTTRAP: |
| case EC_CP14RRTTRAP: |
| /* Similarly for MRRC/MCRR traps for Rt and Rt2 fields */ |
| rt = extract32(env->exception.syndrome, 5, 4); |
| rt = aarch64_regnum(env, rt); |
| env->exception.syndrome = deposit32(env->exception.syndrome, |
| 5, 5, rt); |
| rt = extract32(env->exception.syndrome, 10, 4); |
| rt = aarch64_regnum(env, rt); |
| env->exception.syndrome = deposit32(env->exception.syndrome, |
| 10, 5, rt); |
| break; |
| } |
| env->cp15.esr_el[new_el] = env->exception.syndrome; |
| break; |
| case EXCP_IRQ: |
| case EXCP_VIRQ: |
| addr += 0x80; |
| break; |
| case EXCP_FIQ: |
| case EXCP_VFIQ: |
| addr += 0x100; |
| break; |
| case EXCP_VSERR: |
| addr += 0x180; |
| /* Construct the SError syndrome from IDS and ISS fields. */ |
| env->exception.syndrome = syn_serror(env->cp15.vsesr_el2 & 0x1ffffff); |
| env->cp15.esr_el[new_el] = env->exception.syndrome; |
| break; |
| default: |
| cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); |
| } |
| |
| if (is_a64(env)) { |
| old_mode = pstate_read(env); |
| aarch64_save_sp(env, arm_current_el(env)); |
| env->elr_el[new_el] = env->pc; |
| } else { |
| old_mode = cpsr_read_for_spsr_elx(env); |
| env->elr_el[new_el] = env->regs[15]; |
| |
| aarch64_sync_32_to_64(env); |
| |
| env->condexec_bits = 0; |
| } |
| env->banked_spsr[aarch64_banked_spsr_index(new_el)] = old_mode; |
| |
| qemu_log_mask(CPU_LOG_INT, "...with ELR 0x%" PRIx64 "\n", |
| env->elr_el[new_el]); |
| |
| if (cpu_isar_feature(aa64_pan, cpu)) { |
| /* The value of PSTATE.PAN is normally preserved, except when ... */ |
| new_mode |= old_mode & PSTATE_PAN; |
| switch (new_el) { |
| case 2: |
| /* ... the target is EL2 with HCR_EL2.{E2H,TGE} == '11' ... */ |
| if ((arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) |
| != (HCR_E2H | HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 1: |
| /* ... the target is EL1 ... */ |
| /* ... and SCTLR_ELx.SPAN == 0, then set to 1. */ |
| if ((env->cp15.sctlr_el[new_el] & SCTLR_SPAN) == 0) { |
| new_mode |= PSTATE_PAN; |
| } |
| break; |
| } |
| } |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| new_mode |= PSTATE_TCO; |
| } |
| |
| if (cpu_isar_feature(aa64_ssbs, cpu)) { |
| if (env->cp15.sctlr_el[new_el] & SCTLR_DSSBS_64) { |
| new_mode |= PSTATE_SSBS; |
| } else { |
| new_mode &= ~PSTATE_SSBS; |
| } |
| } |
| |
| pstate_write(env, PSTATE_DAIF | new_mode); |
| env->aarch64 = true; |
| aarch64_restore_sp(env, new_el); |
| helper_rebuild_hflags_a64(env, new_el); |
| |
| env->pc = addr; |
| |
| qemu_log_mask(CPU_LOG_INT, "...to EL%d PC 0x%" PRIx64 " PSTATE 0x%x\n", |
| new_el, env->pc, pstate_read(env)); |
| } |
| |
| /* |
| * Do semihosting call and set the appropriate return value. All the |
| * permission and validity checks have been done at translate time. |
| * |
| * We only see semihosting exceptions in TCG only as they are not |
| * trapped to the hypervisor in KVM. |
| */ |
| #ifdef CONFIG_TCG |
| static void handle_semihosting(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| if (is_a64(env)) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...handling as semihosting call 0x%" PRIx64 "\n", |
| env->xregs[0]); |
| do_common_semihosting(cs); |
| env->pc += 4; |
| } else { |
| qemu_log_mask(CPU_LOG_INT, |
| "...handling as semihosting call 0x%x\n", |
| env->regs[0]); |
| do_common_semihosting(cs); |
| env->regs[15] += env->thumb ? 2 : 4; |
| } |
| } |
| #endif |
| |
| /* |
| * Handle a CPU exception for A and R profile CPUs. |
| * Do any appropriate logging, handle PSCI calls, and then hand off |
| * to the AArch64-entry or AArch32-entry function depending on the |
| * target exception level's register width. |
| * |
| * Note: this is used for both TCG (as the do_interrupt tcg op), |
| * and KVM to re-inject guest debug exceptions, and to |
| * inject a Synchronous-External-Abort. |
| */ |
| void arm_cpu_do_interrupt(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| unsigned int new_el = env->exception.target_el; |
| |
| assert(!arm_feature(env, ARM_FEATURE_M)); |
| |
| arm_log_exception(cs); |
| qemu_log_mask(CPU_LOG_INT, "...from EL%d to EL%d\n", arm_current_el(env), |
| new_el); |
| if (qemu_loglevel_mask(CPU_LOG_INT) |
| && !excp_is_internal(cs->exception_index)) { |
| qemu_log_mask(CPU_LOG_INT, "...with ESR 0x%x/0x%" PRIx32 "\n", |
| syn_get_ec(env->exception.syndrome), |
| env->exception.syndrome); |
| } |
| |
| if (arm_is_psci_call(cpu, cs->exception_index)) { |
| arm_handle_psci_call(cpu); |
| qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); |
| return; |
| } |
| |
| /* |
| * Semihosting semantics depend on the register width of the code |
| * that caused the exception, not the target exception level, so |
| * must be handled here. |
| */ |
| #ifdef CONFIG_TCG |
| if (cs->exception_index == EXCP_SEMIHOST) { |
| handle_semihosting(cs); |
| return; |
| } |
| #endif |
| |
| /* |
| * Hooks may change global state so BQL should be held, also the |
| * BQL needs to be held for any modification of |
| * cs->interrupt_request. |
| */ |
| g_assert(qemu_mutex_iothread_locked()); |
| |
| arm_call_pre_el_change_hook(cpu); |
| |
| assert(!excp_is_internal(cs->exception_index)); |
| if (arm_el_is_aa64(env, new_el)) { |
| arm_cpu_do_interrupt_aarch64(cs); |
| } else { |
| arm_cpu_do_interrupt_aarch32(cs); |
| } |
| |
| arm_call_el_change_hook(cpu); |
| |
| if (!kvm_enabled()) { |
| cs->interrupt_request |= CPU_INTERRUPT_EXITTB; |
| } |
| } |
| #endif /* !CONFIG_USER_ONLY */ |
| |
| uint64_t arm_sctlr(CPUARMState *env, int el) |
| { |
| /* Only EL0 needs to be adjusted for EL1&0 or EL2&0. */ |
| if (el == 0) { |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, 0); |
| el = mmu_idx == ARMMMUIdx_E20_0 ? 2 : 1; |
| } |
| return env->cp15.sctlr_el[el]; |
| } |
| |
| int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx) |
| { |
| if (regime_has_2_ranges(mmu_idx)) { |
| return extract64(tcr, 37, 2); |
| } else if (regime_is_stage2(mmu_idx)) { |
| return 0; /* VTCR_EL2 */ |
| } else { |
| /* Replicate the single TBI bit so we always have 2 bits. */ |
| return extract32(tcr, 20, 1) * 3; |
| } |
| } |
| |
| int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx) |
| { |
| if (regime_has_2_ranges(mmu_idx)) { |
| return extract64(tcr, 51, 2); |
| } else if (regime_is_stage2(mmu_idx)) { |
| return 0; /* VTCR_EL2 */ |
| } else { |
| /* Replicate the single TBID bit so we always have 2 bits. */ |
| return extract32(tcr, 29, 1) * 3; |
| } |
| } |
| |
| static int aa64_va_parameter_tcma(uint64_t tcr, ARMMMUIdx mmu_idx) |
| { |
| if (regime_has_2_ranges(mmu_idx)) { |
| return extract64(tcr, 57, 2); |
| } else { |
| /* Replicate the single TCMA bit so we always have 2 bits. */ |
| return extract32(tcr, 30, 1) * 3; |
| } |
| } |
| |
| static ARMGranuleSize tg0_to_gran_size(int tg) |
| { |
| switch (tg) { |
| case 0: |
| return Gran4K; |
| case 1: |
| return Gran64K; |
| case 2: |
| return Gran16K; |
| default: |
| return GranInvalid; |
| } |
| } |
| |
| static ARMGranuleSize tg1_to_gran_size(int tg) |
| { |
| switch (tg) { |
| case 1: |
| return Gran16K; |
| case 2: |
| return Gran4K; |
| case 3: |
| return Gran64K; |
| default: |
| return GranInvalid; |
| } |
| } |
| |
| static inline bool have4k(ARMCPU *cpu, bool stage2) |
| { |
| return stage2 ? cpu_isar_feature(aa64_tgran4_2, cpu) |
| : cpu_isar_feature(aa64_tgran4, cpu); |
| } |
| |
| static inline bool have16k(ARMCPU *cpu, bool stage2) |
| { |
| return stage2 ? cpu_isar_feature(aa64_tgran16_2, cpu) |
| : cpu_isar_feature(aa64_tgran16, cpu); |
| } |
| |
| static inline bool have64k(ARMCPU *cpu, bool stage2) |
| { |
| return stage2 ? cpu_isar_feature(aa64_tgran64_2, cpu) |
| : cpu_isar_feature(aa64_tgran64, cpu); |
| } |
| |
| static ARMGranuleSize sanitize_gran_size(ARMCPU *cpu, ARMGranuleSize gran, |
| bool stage2) |
| { |
| switch (gran) { |
| case Gran4K: |
| if (have4k(cpu, stage2)) { |
| return gran; |
| } |
| break; |
| case Gran16K: |
| if (have16k(cpu, stage2)) { |
| return gran; |
| } |
| break; |
| case Gran64K: |
| if (have64k(cpu, stage2)) { |
| return gran; |
| } |
| break; |
| case GranInvalid: |
| break; |
| } |
| /* |
| * If the guest selects a granule size that isn't implemented, |
| * the architecture requires that we behave as if it selected one |
| * that is (with an IMPDEF choice of which one to pick). We choose |
| * to implement the smallest supported granule size. |
| */ |
| if (have4k(cpu, stage2)) { |
| return Gran4K; |
| } |
| if (have16k(cpu, stage2)) { |
| return Gran16K; |
| } |
| assert(have64k(cpu, stage2)); |
| return Gran64K; |
| } |
| |
| ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, |
| ARMMMUIdx mmu_idx, bool data) |
| { |
| uint64_t tcr = regime_tcr(env, mmu_idx); |
| bool epd, hpd, tsz_oob, ds, ha, hd; |
| int select, tsz, tbi, max_tsz, min_tsz, ps, sh; |
| ARMGranuleSize gran; |
| ARMCPU *cpu = env_archcpu(env); |
| bool stage2 = regime_is_stage2(mmu_idx); |
| |
| if (!regime_has_2_ranges(mmu_idx)) { |
| select = 0; |
| tsz = extract32(tcr, 0, 6); |
| gran = tg0_to_gran_size(extract32(tcr, 14, 2)); |
| if (stage2) { |
| /* VTCR_EL2 */ |
| hpd = false; |
| } else { |
| hpd = extract32(tcr, 24, 1); |
| } |
| epd = false; |
| sh = extract32(tcr, 12, 2); |
| ps = extract32(tcr, 16, 3); |
| ha = extract32(tcr, 21, 1) && cpu_isar_feature(aa64_hafs, cpu); |
| hd = extract32(tcr, 22, 1) && cpu_isar_feature(aa64_hdbs, cpu); |
| ds = extract64(tcr, 32, 1); |
| } else { |
| bool e0pd; |
| |
| /* |
| * Bit 55 is always between the two regions, and is canonical for |
| * determining if address tagging is enabled. |
| */ |
| select = extract64(va, 55, 1); |
| if (!select) { |
| tsz = extract32(tcr, 0, 6); |
| gran = tg0_to_gran_size(extract32(tcr, 14, 2)); |
| epd = extract32(tcr, 7, 1); |
| sh = extract32(tcr, 12, 2); |
| hpd = extract64(tcr, 41, 1); |
| e0pd = extract64(tcr, 55, 1); |
| } else { |
| tsz = extract32(tcr, 16, 6); |
| gran = tg1_to_gran_size(extract32(tcr, 30, 2)); |
| epd = extract32(tcr, 23, 1); |
| sh = extract32(tcr, 28, 2); |
| hpd = extract64(tcr, 42, 1); |
| e0pd = extract64(tcr, 56, 1); |
| } |
| ps = extract64(tcr, 32, 3); |
| ha = extract64(tcr, 39, 1) && cpu_isar_feature(aa64_hafs, cpu); |
| hd = extract64(tcr, 40, 1) && cpu_isar_feature(aa64_hdbs, cpu); |
| ds = extract64(tcr, 59, 1); |
| |
| if (e0pd && cpu_isar_feature(aa64_e0pd, cpu) && |
| regime_is_user(env, mmu_idx)) { |
| epd = true; |
| } |
| } |
| |
| gran = sanitize_gran_size(cpu, gran, stage2); |
| |
| if (cpu_isar_feature(aa64_st, cpu)) { |
| max_tsz = 48 - (gran == Gran64K); |
| } else { |
| max_tsz = 39; |
| } |
| |
| /* |
| * DS is RES0 unless FEAT_LPA2 is supported for the given page size; |
| * adjust the effective value of DS, as documented. |
| */ |
| min_tsz = 16; |
| if (gran == Gran64K) { |
| if (cpu_isar_feature(aa64_lva, cpu)) { |
| min_tsz = 12; |
| } |
| ds = false; |
| } else if (ds) { |
| if (regime_is_stage2(mmu_idx)) { |
| if (gran == Gran16K) { |
| ds = cpu_isar_feature(aa64_tgran16_2_lpa2, cpu); |
| } else { |
| ds = cpu_isar_feature(aa64_tgran4_2_lpa2, cpu); |
| } |
| } else { |
| if (gran == Gran16K) { |
| ds = cpu_isar_feature(aa64_tgran16_lpa2, cpu); |
| } else { |
| ds = cpu_isar_feature(aa64_tgran4_lpa2, cpu); |
| } |
| } |
| if (ds) { |
| min_tsz = 12; |
| } |
| } |
| |
| if (tsz > max_tsz) { |
| tsz = max_tsz; |
| tsz_oob = true; |
| } else if (tsz < min_tsz) { |
| tsz = min_tsz; |
| tsz_oob = true; |
| } else { |
| tsz_oob = false; |
| } |
| |
| /* Present TBI as a composite with TBID. */ |
| tbi = aa64_va_parameter_tbi(tcr, mmu_idx); |
| if (!data) { |
| tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx); |
| } |
| tbi = (tbi >> select) & 1; |
| |
| return (ARMVAParameters) { |
| .tsz = tsz, |
| .ps = ps, |
| .sh = sh, |
| .select = select, |
| .tbi = tbi, |
| .epd = epd, |
| .hpd = hpd, |
| .tsz_oob = tsz_oob, |
| .ds = ds, |
| .ha = ha, |
| .hd = ha && hd, |
| .gran = gran, |
| }; |
| } |
| |
| /* |
| * Note that signed overflow is undefined in C. The following routines are |
| * careful to use unsigned types where modulo arithmetic is required. |
| * Failure to do so _will_ break on newer gcc. |
| */ |
| |
| /* Signed saturating arithmetic. */ |
| |
| /* Perform 16-bit signed saturating addition. */ |
| static inline uint16_t add16_sat(uint16_t a, uint16_t b) |
| { |
| uint16_t res; |
| |
| res = a + b; |
| if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) { |
| if (a & 0x8000) { |
| res = 0x8000; |
| } else { |
| res = 0x7fff; |
| } |
| } |
| return res; |
| } |
| |
| /* Perform 8-bit signed saturating addition. */ |
| static inline uint8_t add8_sat(uint8_t a, uint8_t b) |
| { |
| uint8_t res; |
| |
| res = a + b; |
| if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) { |
| if (a & 0x80) { |
| res = 0x80; |
| } else { |
| res = 0x7f; |
| } |
| } |
| return res; |
| } |
| |
| /* Perform 16-bit signed saturating subtraction. */ |
| static inline uint16_t sub16_sat(uint16_t a, uint16_t b) |
| { |
| uint16_t res; |
| |
| res = a - b; |
| if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) { |
| if (a & 0x8000) { |
| res = 0x8000; |
| } else { |
| res = 0x7fff; |
| } |
| } |
| return res; |
| } |
| |
| /* Perform 8-bit signed saturating subtraction. */ |
| static inline uint8_t sub8_sat(uint8_t a, uint8_t b) |
| { |
| uint8_t res; |
| |
| res = a - b; |
| if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) { |
| if (a & 0x80) { |
| res = 0x80; |
| } else { |
| res = 0x7f; |
| } |
| } |
| return res; |
| } |
| |
| #define ADD16(a, b, n) RESULT(add16_sat(a, b), n, 16); |
| #define SUB16(a, b, n) RESULT(sub16_sat(a, b), n, 16); |
| #define ADD8(a, b, n) RESULT(add8_sat(a, b), n, 8); |
| #define SUB8(a, b, n) RESULT(sub8_sat(a, b), n, 8); |
| #define PFX q |
| |
| #include "op_addsub.h" |
| |
| /* Unsigned saturating arithmetic. */ |
| static inline uint16_t add16_usat(uint16_t a, uint16_t b) |
| { |
| uint16_t res; |
| res = a + b; |
| if (res < a) { |
| res = 0xffff; |
| } |
| return res; |
| } |
| |
| static inline uint16_t sub16_usat(uint16_t a, uint16_t b) |
| { |
| if (a > b) { |
| return a - b; |
| } else { |
| return 0; |
| } |
| } |
| |
| static inline uint8_t add8_usat(uint8_t a, uint8_t b) |
| { |
| uint8_t res; |
| res = a + b; |
| if (res < a) { |
| res = 0xff; |
| } |
| return res; |
| } |
| |
| static inline uint8_t sub8_usat(uint8_t a, uint8_t b) |
| { |
| if (a > b) { |
| return a - b; |
| } else { |
| return 0; |
| } |
| } |
| |
| #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16); |
| #define SUB16(a, b, n) RESULT(sub16_usat(a, b), n, 16); |
| #define ADD8(a, b, n) RESULT(add8_usat(a, b), n, 8); |
| #define SUB8(a, b, n) RESULT(sub8_usat(a, b), n, 8); |
| #define PFX uq |
| |
| #include "op_addsub.h" |
| |
| /* Signed modulo arithmetic. */ |
| #define SARITH16(a, b, n, op) do { \ |
| int32_t sum; \ |
| sum = (int32_t)(int16_t)(a) op (int32_t)(int16_t)(b); \ |
| RESULT(sum, n, 16); \ |
| if (sum >= 0) \ |
| ge |= 3 << (n * 2); \ |
| } while (0) |
| |
| #define SARITH8(a, b, n, op) do { \ |
| int32_t sum; \ |
| sum = (int32_t)(int8_t)(a) op (int32_t)(int8_t)(b); \ |
| RESULT(sum, n, 8); \ |
| if (sum >= 0) \ |
| ge |= 1 << n; \ |
| } while (0) |
| |
| |
| #define ADD16(a, b, n) SARITH16(a, b, n, +) |
| #define SUB16(a, b, n) SARITH16(a, b, n, -) |
| #define ADD8(a, b, n) SARITH8(a, b, n, +) |
| #define SUB8(a, b, n) SARITH8(a, b, n, -) |
| #define PFX s |
| #define ARITH_GE |
| |
| #include "op_addsub.h" |
| |
| /* Unsigned modulo arithmetic. */ |
| #define ADD16(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b); \ |
| RESULT(sum, n, 16); \ |
| if ((sum >> 16) == 1) \ |
| ge |= 3 << (n * 2); \ |
| } while (0) |
| |
| #define ADD8(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b); \ |
| RESULT(sum, n, 8); \ |
| if ((sum >> 8) == 1) \ |
| ge |= 1 << n; \ |
| } while (0) |
| |
| #define SUB16(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b); \ |
| RESULT(sum, n, 16); \ |
| if ((sum >> 16) == 0) \ |
| ge |= 3 << (n * 2); \ |
| } while (0) |
| |
| #define SUB8(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b); \ |
| RESULT(sum, n, 8); \ |
| if ((sum >> 8) == 0) \ |
| ge |= 1 << n; \ |
| } while (0) |
| |
| #define PFX u |
| #define ARITH_GE |
| |
| #include "op_addsub.h" |
| |
| /* Halved signed arithmetic. */ |
| #define ADD16(a, b, n) \ |
| RESULT(((int32_t)(int16_t)(a) + (int32_t)(int16_t)(b)) >> 1, n, 16) |
| #define SUB16(a, b, n) \ |
| RESULT(((int32_t)(int16_t)(a) - (int32_t)(int16_t)(b)) >> 1, n, 16) |
| #define ADD8(a, b, n) \ |
| RESULT(((int32_t)(int8_t)(a) + (int32_t)(int8_t)(b)) >> 1, n, 8) |
| #define SUB8(a, b, n) \ |
| RESULT(((int32_t)(int8_t)(a) - (int32_t)(int8_t)(b)) >> 1, n, 8) |
| #define PFX sh |
| |
| #include "op_addsub.h" |
| |
| /* Halved unsigned arithmetic. */ |
| #define ADD16(a, b, n) \ |
| RESULT(((uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b)) >> 1, n, 16) |
| #define SUB16(a, b, n) \ |
| RESULT(((uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b)) >> 1, n, 16) |
| #define ADD8(a, b, n) \ |
| RESULT(((uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b)) >> 1, n, 8) |
| #define SUB8(a, b, n) \ |
| RESULT(((uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b)) >> 1, n, 8) |
| #define PFX uh |
| |
| #include "op_addsub.h" |
| |
| static inline uint8_t do_usad(uint8_t a, uint8_t b) |
| { |
| if (a > b) { |
| return a - b; |
| } else { |
| return b - a; |
| } |
| } |
| |
| /* Unsigned sum of absolute byte differences. */ |
| uint32_t HELPER(usad8)(uint32_t a, uint32_t b) |
| { |
| uint32_t sum; |
| sum = do_usad(a, b); |
| sum += do_usad(a >> 8, b >> 8); |
| sum += do_usad(a >> 16, b >> 16); |
| sum += do_usad(a >> 24, b >> 24); |
| return sum; |
| } |
| |
| /* For ARMv6 SEL instruction. */ |
| uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) |
| { |
| uint32_t mask; |
| |
| mask = 0; |
| if (flags & 1) { |
| mask |= 0xff; |
| } |
| if (flags & 2) { |
| mask |= 0xff00; |
| } |
| if (flags & 4) { |
| mask |= 0xff0000; |
| } |
| if (flags & 8) { |
| mask |= 0xff000000; |
| } |
| return (a & mask) | (b & ~mask); |
| } |
| |
| /* |
| * CRC helpers. |
| * The upper bytes of val (above the number specified by 'bytes') must have |
| * been zeroed out by the caller. |
| */ |
| uint32_t HELPER(crc32)(uint32_t acc, uint32_t val, uint32_t bytes) |
| { |
| uint8_t buf[4]; |
| |
| stl_le_p(buf, val); |
| |
| /* zlib crc32 converts the accumulator and output to one's complement. */ |
| return crc32(acc ^ 0xffffffff, buf, bytes) ^ 0xffffffff; |
| } |
| |
| uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes) |
| { |
| uint8_t buf[4]; |
| |
| stl_le_p(buf, val); |
| |
| /* Linux crc32c converts the output to one's complement. */ |
| return crc32c(acc, buf, bytes) ^ 0xffffffff; |
| } |
| |
| /* |
| * Return the exception level to which FP-disabled exceptions should |
| * be taken, or 0 if FP is enabled. |
| */ |
| int fp_exception_el(CPUARMState *env, int cur_el) |
| { |
| #ifndef CONFIG_USER_ONLY |
| uint64_t hcr_el2; |
| |
| /* |
| * CPACR and the CPTR registers don't exist before v6, so FP is |
| * always accessible |
| */ |
| if (!arm_feature(env, ARM_FEATURE_V6)) { |
| return 0; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| /* CPACR can cause a NOCP UsageFault taken to current security state */ |
| if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { |
| return 1; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { |
| if (!extract32(env->v7m.nsacr, 10, 1)) { |
| /* FP insns cause a NOCP UsageFault taken to Secure */ |
| return 3; |
| } |
| } |
| |
| return 0; |
| } |
| |
| hcr_el2 = arm_hcr_el2_eff(env); |
| |
| /* |
| * The CPACR controls traps to EL1, or PL1 if we're 32 bit: |
| * 0, 2 : trap EL0 and EL1/PL1 accesses |
| * 1 : trap only EL0 accesses |
| * 3 : trap no accesses |
| * This register is ignored if E2H+TGE are both set. |
| */ |
| if ((hcr_el2 & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| int fpen = FIELD_EX64(env->cp15.cpacr_el1, CPACR_EL1, FPEN); |
| |
| switch (fpen) { |
| case 1: |
| if (cur_el != 0) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| /* Trap from Secure PL0 or PL1 to Secure PL1. */ |
| if (!arm_el_is_aa64(env, 3) |
| && (cur_el == 3 || arm_is_secure_below_el3(env))) { |
| return 3; |
| } |
| if (cur_el <= 1) { |
| return 1; |
| } |
| break; |
| } |
| } |
| |
| /* |
| * The NSACR allows A-profile AArch32 EL3 and M-profile secure mode |
| * to control non-secure access to the FPU. It doesn't have any |
| * effect if EL3 is AArch64 or if EL3 doesn't exist at all. |
| */ |
| if ((arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| cur_el <= 2 && !arm_is_secure_below_el3(env))) { |
| if (!extract32(env->cp15.nsacr, 10, 1)) { |
| /* FP insns act as UNDEF */ |
| return cur_el == 2 ? 2 : 1; |
| } |
| } |
| |
| /* |
| * CPTR_EL2 is present in v7VE or v8, and changes format |
| * with HCR_EL2.E2H (regardless of TGE). |
| */ |
| if (cur_el <= 2) { |
| if (hcr_el2 & HCR_E2H) { |
| switch (FIELD_EX64(env->cp15.cptr_el[2], CPTR_EL2, FPEN)) { |
| case 1: |
| if (cur_el != 0 || !(hcr_el2 & HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 2; |
| } |
| } else if (arm_is_el2_enabled(env)) { |
| if (FIELD_EX64(env->cp15.cptr_el[2], CPTR_EL2, TFP)) { |
| return 2; |
| } |
| } |
| } |
| |
| /* CPTR_EL3 : present in v8 */ |
| if (FIELD_EX64(env->cp15.cptr_el[3], CPTR_EL3, TFP)) { |
| /* Trap all FP ops to EL3 */ |
| return 3; |
| } |
| #endif |
| return 0; |
| } |
| |
| /* Return the exception level we're running at if this is our mmu_idx */ |
| int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) |
| { |
| if (mmu_idx & ARM_MMU_IDX_M) { |
| return mmu_idx & ARM_MMU_IDX_M_PRIV; |
| } |
| |
| switch (mmu_idx) { |
| case ARMMMUIdx_E10_0: |
| case ARMMMUIdx_E20_0: |
| return 0; |
| case ARMMMUIdx_E10_1: |
| case ARMMMUIdx_E10_1_PAN: |
| return 1; |
| case ARMMMUIdx_E2: |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| return 2; |
| case ARMMMUIdx_E3: |
| return 3; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| #ifndef CONFIG_TCG |
| ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) |
| { |
| g_assert_not_reached(); |
| } |
| #endif |
| |
| static bool arm_pan_enabled(CPUARMState *env) |
| { |
| if (is_a64(env)) { |
| return env->pstate & PSTATE_PAN; |
| } else { |
| return env->uncached_cpsr & CPSR_PAN; |
| } |
| } |
| |
| ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el) |
| { |
| ARMMMUIdx idx; |
| uint64_t hcr; |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| return arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); |
| } |
| |
| /* See ARM pseudo-function ELIsInHost. */ |
| switch (el) { |
| case 0: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| idx = ARMMMUIdx_E20_0; |
| } else { |
| idx = ARMMMUIdx_E10_0; |
| } |
| break; |
| case 1: |
| if (arm_pan_enabled(env)) { |
| idx = ARMMMUIdx_E10_1_PAN; |
| } else { |
| idx = ARMMMUIdx_E10_1; |
| } |
| break; |
| case 2: |
| /* Note that TGE does not apply at EL2. */ |
| if (arm_hcr_el2_eff(env) & HCR_E2H) { |
| if (arm_pan_enabled(env)) { |
| idx = ARMMMUIdx_E20_2_PAN; |
| } else { |
| idx = ARMMMUIdx_E20_2; |
| } |
| } else { |
| idx = ARMMMUIdx_E2; |
| } |
| break; |
| case 3: |
| return ARMMMUIdx_E3; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| return idx; |
| } |
| |
| ARMMMUIdx arm_mmu_idx(CPUARMState *env) |
| { |
| return arm_mmu_idx_el(env, arm_current_el(env)); |
| } |
| |
| static inline bool fgt_svc(CPUARMState *env, int el) |
| { |
| /* |
| * Assuming fine-grained-traps are active, return true if we |
| * should be trapping on SVC instructions. Only AArch64 can |
| * trap on an SVC at EL1, but we don't need to special-case this |
| * because if this is AArch32 EL1 then arm_fgt_active() is false. |
| * We also know el is 0 or 1. |
| */ |
| return el == 0 ? |
| FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, SVC_EL0) : |
| FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, SVC_EL1); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_common(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx, |
| CPUARMTBFlags flags) |
| { |
| DP_TBFLAG_ANY(flags, FPEXC_EL, fp_el); |
| DP_TBFLAG_ANY(flags, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); |
| |
| if (arm_singlestep_active(env)) { |
| DP_TBFLAG_ANY(flags, SS_ACTIVE, 1); |
| } |
| |
| return flags; |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_common_32(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx, |
| CPUARMTBFlags flags) |
| { |
| bool sctlr_b = arm_sctlr_b(env); |
| |
| if (sctlr_b) { |
| DP_TBFLAG_A32(flags, SCTLR__B, 1); |
| } |
| if (arm_cpu_data_is_big_endian_a32(env, sctlr_b)) { |
| DP_TBFLAG_ANY(flags, BE_DATA, 1); |
| } |
| DP_TBFLAG_A32(flags, NS, !access_secure_reg(env)); |
| |
| return rebuild_hflags_common(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_m32(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx) |
| { |
| CPUARMTBFlags flags = {}; |
| uint32_t ccr = env->v7m.ccr[env->v7m.secure]; |
| |
| /* Without HaveMainExt, CCR.UNALIGN_TRP is RES1. */ |
| if (ccr & R_V7M_CCR_UNALIGN_TRP_MASK) { |
| DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); |
| } |
| |
| if (arm_v7m_is_handler_mode(env)) { |
| DP_TBFLAG_M32(flags, HANDLER, 1); |
| } |
| |
| /* |
| * v8M always applies stack limit checks unless CCR.STKOFHFNMIGN |
| * is suppressing them because the requested execution priority |
| * is less than 0. |
| */ |
| if (arm_feature(env, ARM_FEATURE_V8) && |
| !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && |
| (ccr & R_V7M_CCR_STKOFHFNMIGN_MASK))) { |
| DP_TBFLAG_M32(flags, STACKCHECK, 1); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY) && env->v7m.secure) { |
| DP_TBFLAG_M32(flags, SECURE, 1); |
| } |
| |
| return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx) |
| { |
| CPUARMTBFlags flags = {}; |
| int el = arm_current_el(env); |
| |
| if (arm_sctlr(env, el) & SCTLR_A) { |
| DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); |
| } |
| |
| if (arm_el_is_aa64(env, 1)) { |
| DP_TBFLAG_A32(flags, VFPEN, 1); |
| } |
| |
| if (el < 2 && env->cp15.hstr_el2 && arm_is_el2_enabled(env) && |
| (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1); |
| } |
| |
| if (arm_fgt_active(env, el)) { |
| DP_TBFLAG_ANY(flags, FGT_ACTIVE, 1); |
| if (fgt_svc(env, el)) { |
| DP_TBFLAG_ANY(flags, FGT_SVC, 1); |
| } |
| } |
| |
| if (env->uncached_cpsr & CPSR_IL) { |
| DP_TBFLAG_ANY(flags, PSTATE__IL, 1); |
| } |
| |
| /* |
| * The SME exception we are testing for is raised via |
| * AArch64.CheckFPAdvSIMDEnabled(), as called from |
| * AArch32.CheckAdvSIMDOrFPEnabled(). |
| */ |
| if (el == 0 |
| && FIELD_EX64(env->svcr, SVCR, SM) |
| && (!arm_is_el2_enabled(env) |
| || (arm_el_is_aa64(env, 2) && !(env->cp15.hcr_el2 & HCR_TGE))) |
| && arm_el_is_aa64(env, 1) |
| && !sme_fa64(env, el)) { |
| DP_TBFLAG_A32(flags, SME_TRAP_NONSTREAMING, 1); |
| } |
| |
| return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, |
| ARMMMUIdx mmu_idx) |
| { |
| CPUARMTBFlags flags = {}; |
| ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); |
| uint64_t tcr = regime_tcr(env, mmu_idx); |
| uint64_t sctlr; |
| int tbii, tbid; |
| |
| DP_TBFLAG_ANY(flags, AARCH64_STATE, 1); |
| |
| /* Get control bits for tagged addresses. */ |
| tbid = aa64_va_parameter_tbi(tcr, mmu_idx); |
| tbii = tbid & ~aa64_va_parameter_tbid(tcr, mmu_idx); |
| |
| DP_TBFLAG_A64(flags, TBII, tbii); |
| DP_TBFLAG_A64(flags, TBID, tbid); |
| |
| if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { |
| int sve_el = sve_exception_el(env, el); |
| |
| /* |
| * If either FP or SVE are disabled, translator does not need len. |
| * If SVE EL > FP EL, FP exception has precedence, and translator |
| * does not need SVE EL. Save potential re-translations by forcing |
| * the unneeded data to zero. |
| */ |
| if (fp_el != 0) { |
| if (sve_el > fp_el) { |
| sve_el = 0; |
| } |
| } else if (sve_el == 0) { |
| DP_TBFLAG_A64(flags, VL, sve_vqm1_for_el(env, el)); |
| } |
| DP_TBFLAG_A64(flags, SVEEXC_EL, sve_el); |
| } |
| if (cpu_isar_feature(aa64_sme, env_archcpu(env))) { |
| int sme_el = sme_exception_el(env, el); |
| bool sm = FIELD_EX64(env->svcr, SVCR, SM); |
| |
| DP_TBFLAG_A64(flags, SMEEXC_EL, sme_el); |
| if (sme_el == 0) { |
| /* Similarly, do not compute SVL if SME is disabled. */ |
| int svl = sve_vqm1_for_el_sm(env, el, true); |
| DP_TBFLAG_A64(flags, SVL, svl); |
| if (sm) { |
| /* If SVE is disabled, we will not have set VL above. */ |
| DP_TBFLAG_A64(flags, VL, svl); |
| } |
| } |
| if (sm) { |
| DP_TBFLAG_A64(flags, PSTATE_SM, 1); |
| DP_TBFLAG_A64(flags, SME_TRAP_NONSTREAMING, !sme_fa64(env, el)); |
| } |
| DP_TBFLAG_A64(flags, PSTATE_ZA, FIELD_EX64(env->svcr, SVCR, ZA)); |
| } |
| |
| sctlr = regime_sctlr(env, stage1); |
| |
| if (sctlr & SCTLR_A) { |
| DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); |
| } |
| |
| if (arm_cpu_data_is_big_endian_a64(el, sctlr)) { |
| DP_TBFLAG_ANY(flags, BE_DATA, 1); |
| } |
| |
| if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) { |
| /* |
| * In order to save space in flags, we record only whether |
| * pauth is "inactive", meaning all insns are implemented as |
| * a nop, or "active" when some action must be performed. |
| * The decision of which action to take is left to a helper. |
| */ |
| if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { |
| DP_TBFLAG_A64(flags, PAUTH_ACTIVE, 1); |
| } |
| } |
| |
| if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { |
| /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */ |
| if (sctlr & (el == 0 ? SCTLR_BT0 : SCTLR_BT1)) { |
| DP_TBFLAG_A64(flags, BT, 1); |
| } |
| } |
| |
| /* Compute the condition for using AccType_UNPRIV for LDTR et al. */ |
| if (!(env->pstate & PSTATE_UAO)) { |
| switch (mmu_idx) { |
| case ARMMMUIdx_E10_1: |
| case ARMMMUIdx_E10_1_PAN: |
| /* TODO: ARMv8.3-NV */ |
| DP_TBFLAG_A64(flags, UNPRIV, 1); |
| break; |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| /* |
| * Note that EL20_2 is gated by HCR_EL2.E2H == 1, but EL20_0 is |
| * gated by HCR_EL2.<E2H,TGE> == '11', and so is LDTR. |
| */ |
| if (env->cp15.hcr_el2 & HCR_TGE) { |
| DP_TBFLAG_A64(flags, UNPRIV, 1); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (env->pstate & PSTATE_IL) { |
| DP_TBFLAG_ANY(flags, PSTATE__IL, 1); |
| } |
| |
| if (arm_fgt_active(env, el)) { |
| DP_TBFLAG_ANY(flags, FGT_ACTIVE, 1); |
| if (FIELD_EX64(env->cp15.fgt_exec[FGTREG_HFGITR], HFGITR_EL2, ERET)) { |
| DP_TBFLAG_A64(flags, FGT_ERET, 1); |
| } |
| if (fgt_svc(env, el)) { |
| DP_TBFLAG_ANY(flags, FGT_SVC, 1); |
| } |
| } |
| |
| if (cpu_isar_feature(aa64_mte, env_archcpu(env))) { |
| /* |
| * Set MTE_ACTIVE if any access may be Checked, and leave clear |
| * if all accesses must be Unchecked: |
| * 1) If no TBI, then there are no tags in the address to check, |
| * 2) If Tag Check Override, then all accesses are Unchecked, |
| * 3) If Tag Check Fail == 0, then Checked access have no effect, |
| * 4) If no Allocation Tag Access, then all accesses are Unchecked. |
| */ |
| if (allocation_tag_access_enabled(env, el, sctlr)) { |
| DP_TBFLAG_A64(flags, ATA, 1); |
| if (tbid |
| && !(env->pstate & PSTATE_TCO) |
| && (sctlr & (el == 0 ? SCTLR_TCF0 : SCTLR_TCF))) { |
| DP_TBFLAG_A64(flags, MTE_ACTIVE, 1); |
| } |
| } |
| /* And again for unprivileged accesses, if required. */ |
| if (EX_TBFLAG_A64(flags, UNPRIV) |
| && tbid |
| && !(env->pstate & PSTATE_TCO) |
| && (sctlr & SCTLR_TCF0) |
| && allocation_tag_access_enabled(env, 0, sctlr)) { |
| DP_TBFLAG_A64(flags, MTE0_ACTIVE, 1); |
| } |
| /* Cache TCMA as well as TBI. */ |
| DP_TBFLAG_A64(flags, TCMA, aa64_va_parameter_tcma(tcr, mmu_idx)); |
| } |
| |
| return rebuild_hflags_common(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_internal(CPUARMState *env) |
| { |
| int el = arm_current_el(env); |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| if (is_a64(env)) { |
| return rebuild_hflags_a64(env, el, fp_el, mmu_idx); |
| } else if (arm_feature(env, ARM_FEATURE_M)) { |
| return rebuild_hflags_m32(env, fp_el, mmu_idx); |
| } else { |
| return rebuild_hflags_a32(env, fp_el, mmu_idx); |
| } |
| } |
| |
| void arm_rebuild_hflags(CPUARMState *env) |
| { |
| env->hflags = rebuild_hflags_internal(env); |
| } |
| |
| /* |
| * If we have triggered a EL state change we can't rely on the |
| * translator having passed it to us, we need to recompute. |
| */ |
| void HELPER(rebuild_hflags_m32_newel)(CPUARMState *env) |
| { |
| int el = arm_current_el(env); |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); |
| } |
| |
| void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) |
| { |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); |
| } |
| |
| /* |
| * If we have triggered a EL state change we can't rely on the |
| * translator having passed it to us, we need to recompute. |
| */ |
| void HELPER(rebuild_hflags_a32_newel)(CPUARMState *env) |
| { |
| int el = arm_current_el(env); |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx); |
| } |
| |
| void HELPER(rebuild_hflags_a32)(CPUARMState *env, int el) |
| { |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx); |
| } |
| |
| void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el) |
| { |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_a64(env, el, fp_el, mmu_idx); |
| } |
| |
| static inline void assert_hflags_rebuild_correctly(CPUARMState *env) |
| { |
| #ifdef CONFIG_DEBUG_TCG |
| CPUARMTBFlags c = env->hflags; |
| CPUARMTBFlags r = rebuild_hflags_internal(env); |
| |
| if (unlikely(c.flags != r.flags || c.flags2 != r.flags2)) { |
| fprintf(stderr, "TCG hflags mismatch " |
| "(current:(0x%08x,0x" TARGET_FMT_lx ")" |
| " rebuilt:(0x%08x,0x" TARGET_FMT_lx ")\n", |
| c.flags, c.flags2, r.flags, r.flags2); |
| abort(); |
| } |
| #endif |
| } |
| |
| static bool mve_no_pred(CPUARMState *env) |
| { |
| /* |
| * Return true if there is definitely no predication of MVE |
| * instructions by VPR or LTPSIZE. (Returning false even if there |
| * isn't any predication is OK; generated code will just be |
| * a little worse.) |
| * If the CPU does not implement MVE then this TB flag is always 0. |
| * |
| * NOTE: if you change this logic, the "recalculate s->mve_no_pred" |
| * logic in gen_update_fp_context() needs to be updated to match. |
| * |
| * We do not include the effect of the ECI bits here -- they are |
| * tracked in other TB flags. This simplifies the logic for |
| * "when did we emit code that changes the MVE_NO_PRED TB flag |
| * and thus need to end the TB?". |
| */ |
| if (cpu_isar_feature(aa32_mve, env_archcpu(env))) { |
| return false; |
| } |
| if (env->v7m.vpr) { |
| return false; |
| } |
| if (env->v7m.ltpsize < 4) { |
| return false; |
| } |
| return true; |
| } |
| |
| void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, |
| target_ulong *cs_base, uint32_t *pflags) |
| { |
| CPUARMTBFlags flags; |
| |
| assert_hflags_rebuild_correctly(env); |
| flags = env->hflags; |
| |
| if (EX_TBFLAG_ANY(flags, AARCH64_STATE)) { |
| *pc = env->pc; |
| if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { |
| DP_TBFLAG_A64(flags, BTYPE, env->btype); |
| } |
| } else { |
| *pc = env->regs[15]; |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY) && |
| FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) |
| != env->v7m.secure) { |
| DP_TBFLAG_M32(flags, FPCCR_S_WRONG, 1); |
| } |
| |
| if ((env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && |
| (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || |
| (env->v7m.secure && |
| !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { |
| /* |
| * ASPEN is set, but FPCA/SFPA indicate that there is no |
| * active FP context; we must create a new FP context before |
| * executing any FP insn. |
| */ |
| DP_TBFLAG_M32(flags, NEW_FP_CTXT_NEEDED, 1); |
| } |
| |
| bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; |
| if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { |
| DP_TBFLAG_M32(flags, LSPACT, 1); |
| } |
| |
| if (mve_no_pred(env)) { |
| DP_TBFLAG_M32(flags, MVE_NO_PRED, 1); |
| } |
| } else { |
| /* |
| * Note that XSCALE_CPAR shares bits with VECSTRIDE. |
| * Note that VECLEN+VECSTRIDE are RES0 for M-profile. |
| */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| DP_TBFLAG_A32(flags, XSCALE_CPAR, env->cp15.c15_cpar); |
| } else { |
| DP_TBFLAG_A32(flags, VECLEN, env->vfp.vec_len); |
| DP_TBFLAG_A32(flags, VECSTRIDE, env->vfp.vec_stride); |
| } |
| if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)) { |
| DP_TBFLAG_A32(flags, VFPEN, 1); |
| } |
| } |
| |
| DP_TBFLAG_AM32(flags, THUMB, env->thumb); |
| DP_TBFLAG_AM32(flags, CONDEXEC, env->condexec_bits); |
| } |
| |
| /* |
| * The SS_ACTIVE and PSTATE_SS bits correspond to the state machine |
| * states defined in the ARM ARM for software singlestep: |
| * SS_ACTIVE PSTATE.SS State |
| * 0 x Inactive (the TB flag for SS is always 0) |
| * 1 0 Active-pending |
| * 1 1 Active-not-pending |
| * SS_ACTIVE is set in hflags; PSTATE__SS is computed every TB. |
| */ |
| if (EX_TBFLAG_ANY(flags, SS_ACTIVE) && (env->pstate & PSTATE_SS)) { |
| DP_TBFLAG_ANY(flags, PSTATE__SS, 1); |
| } |
| |
| *pflags = flags.flags; |
| *cs_base = flags.flags2; |
| } |
| |
| #ifdef TARGET_AARCH64 |
| /* |
| * The manual says that when SVE is enabled and VQ is widened the |
| * implementation is allowed to zero the previously inaccessible |
| * portion of the registers. The corollary to that is that when |
| * SVE is enabled and VQ is narrowed we are also allowed to zero |
| * the now inaccessible portion of the registers. |
| * |
| * The intent of this is that no predicate bit beyond VQ is ever set. |
| * Which means that some operations on predicate registers themselves |
| * may operate on full uint64_t or even unrolled across the maximum |
| * uint64_t[4]. Performing 4 bits of host arithmetic unconditionally |
| * may well be cheaper than conditionals to restrict the operation |
| * to the relevant portion of a uint16_t[16]. |
| */ |
| void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) |
| { |
| int i, j; |
| uint64_t pmask; |
| |
| assert(vq >= 1 && vq <= ARM_MAX_VQ); |
| assert(vq <= env_archcpu(env)->sve_max_vq); |
| |
| /* Zap the high bits of the zregs. */ |
| for (i = 0; i < 32; i++) { |
| memset(&env->vfp.zregs[i].d[2 * vq], 0, 16 * (ARM_MAX_VQ - vq)); |
| } |
| |
| /* Zap the high bits of the pregs and ffr. */ |
| pmask = 0; |
| if (vq & 3) { |
| pmask = ~(-1ULL << (16 * (vq & 3))); |
| } |
| for (j = vq / 4; j < ARM_MAX_VQ / 4; j++) { |
| for (i = 0; i < 17; ++i) { |
| env->vfp.pregs[i].p[j] &= pmask; |
| } |
| pmask = 0; |
| } |
| } |
| |
| static uint32_t sve_vqm1_for_el_sm_ena(CPUARMState *env, int el, bool sm) |
| { |
| int exc_el; |
| |
| if (sm) { |
| exc_el = sme_exception_el(env, el); |
| } else { |
| exc_el = sve_exception_el(env, el); |
| } |
| if (exc_el) { |
| return 0; /* disabled */ |
| } |
| return sve_vqm1_for_el_sm(env, el, sm); |
| } |
| |
| /* |
| * Notice a change in SVE vector size when changing EL. |
| */ |
| void aarch64_sve_change_el(CPUARMState *env, int old_el, |
| int new_el, bool el0_a64) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int old_len, new_len; |
| bool old_a64, new_a64, sm; |
| |
| /* Nothing to do if no SVE. */ |
| if (!cpu_isar_feature(aa64_sve, cpu)) { |
| return; |
| } |
| |
| /* Nothing to do if FP is disabled in either EL. */ |
| if (fp_exception_el(env, old_el) || fp_exception_el(env, new_el)) { |
| return; |
| } |
| |
| old_a64 = old_el ? arm_el_is_aa64(env, old_el) : el0_a64; |
| new_a64 = new_el ? arm_el_is_aa64(env, new_el) : el0_a64; |
| |
| /* |
| * Both AArch64.TakeException and AArch64.ExceptionReturn |
| * invoke ResetSVEState when taking an exception from, or |
| * returning to, AArch32 state when PSTATE.SM is enabled. |
| */ |
| sm = FIELD_EX64(env->svcr, SVCR, SM); |
| if (old_a64 != new_a64 && sm) { |
| arm_reset_sve_state(env); |
| return; |
| } |
| |
| /* |
| * DDI0584A.d sec 3.2: "If SVE instructions are disabled or trapped |
| * at ELx, or not available because the EL is in AArch32 state, then |
| * for all purposes other than a direct read, the ZCR_ELx.LEN field |
| * has an effective value of 0". |
| * |
| * Consider EL2 (aa64, vq=4) -> EL0 (aa32) -> EL1 (aa64, vq=0). |
| * If we ignore aa32 state, we would fail to see the vq4->vq0 transition |
| * from EL2->EL1. Thus we go ahead and narrow when entering aa32 so that |
| * we already have the correct register contents when encountering the |
| * vq0->vq0 transition between EL0->EL1. |
| */ |
| old_len = new_len = 0; |
| if (old_a64) { |
| old_len = sve_vqm1_for_el_sm_ena(env, old_el, sm); |
| } |
| if (new_a64) { |
| new_len = sve_vqm1_for_el_sm_ena(env, new_el, sm); |
| } |
| |
| /* When changing vector length, clear inaccessible state. */ |
| if (new_len < old_len) { |
| aarch64_sve_narrow_vq(env, new_len + 1); |
| } |
| } |
| #endif |