| /* |
| * Syborg serial port |
| * |
| * Copyright (c) 2008 CodeSourcery |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "sysbus.h" |
| #include "qemu-char.h" |
| #include "syborg.h" |
| |
| //#define DEBUG_SYBORG_SERIAL |
| |
| #ifdef DEBUG_SYBORG_SERIAL |
| #define DPRINTF(fmt, ...) \ |
| do { printf("syborg_serial: " fmt , ##args); } while (0) |
| #define BADF(fmt, ...) \ |
| do { fprintf(stderr, "syborg_serial: error: " fmt , ## __VA_ARGS__); \ |
| exit(1);} while (0) |
| #else |
| #define DPRINTF(fmt, ...) do {} while(0) |
| #define BADF(fmt, ...) \ |
| do { fprintf(stderr, "syborg_serial: error: " fmt , ## __VA_ARGS__);} while (0) |
| #endif |
| |
| enum { |
| SERIAL_ID = 0, |
| SERIAL_DATA = 1, |
| SERIAL_FIFO_COUNT = 2, |
| SERIAL_INT_ENABLE = 3, |
| SERIAL_DMA_TX_ADDR = 4, |
| SERIAL_DMA_TX_COUNT = 5, /* triggers dma */ |
| SERIAL_DMA_RX_ADDR = 6, |
| SERIAL_DMA_RX_COUNT = 7, /* triggers dma */ |
| SERIAL_FIFO_SIZE = 8 |
| }; |
| |
| #define SERIAL_INT_FIFO (1u << 0) |
| #define SERIAL_INT_DMA_TX (1u << 1) |
| #define SERIAL_INT_DMA_RX (1u << 2) |
| |
| typedef struct { |
| SysBusDevice busdev; |
| MemoryRegion iomem; |
| uint32_t int_enable; |
| uint32_t fifo_size; |
| uint32_t *read_fifo; |
| int read_pos; |
| int read_count; |
| CharDriverState *chr; |
| qemu_irq irq; |
| uint32_t dma_tx_ptr; |
| uint32_t dma_rx_ptr; |
| uint32_t dma_rx_size; |
| } SyborgSerialState; |
| |
| static void syborg_serial_update(SyborgSerialState *s) |
| { |
| int level; |
| level = 0; |
| if ((s->int_enable & SERIAL_INT_FIFO) && s->read_count) |
| level = 1; |
| if (s->int_enable & SERIAL_INT_DMA_TX) |
| level = 1; |
| if ((s->int_enable & SERIAL_INT_DMA_RX) && s->dma_rx_size == 0) |
| level = 1; |
| |
| qemu_set_irq(s->irq, level); |
| } |
| |
| static uint32_t fifo_pop(SyborgSerialState *s) |
| { |
| const uint32_t c = s->read_fifo[s->read_pos]; |
| s->read_count--; |
| s->read_pos++; |
| if (s->read_pos == s->fifo_size) |
| s->read_pos = 0; |
| |
| DPRINTF("FIFO pop %x (%d)\n", c, s->read_count); |
| return c; |
| } |
| |
| static void fifo_push(SyborgSerialState *s, uint32_t new_value) |
| { |
| int slot; |
| |
| DPRINTF("FIFO push %x (%d)\n", new_value, s->read_count); |
| slot = s->read_pos + s->read_count; |
| if (slot >= s->fifo_size) |
| slot -= s->fifo_size; |
| s->read_fifo[slot] = new_value; |
| s->read_count++; |
| } |
| |
| static void do_dma_tx(SyborgSerialState *s, uint32_t count) |
| { |
| unsigned char ch; |
| |
| if (count == 0) |
| return; |
| |
| if (s->chr != NULL) { |
| /* optimize later. Now, 1 byte per iteration */ |
| while (count--) { |
| cpu_physical_memory_read(s->dma_tx_ptr, &ch, 1); |
| qemu_chr_fe_write(s->chr, &ch, 1); |
| s->dma_tx_ptr++; |
| } |
| } else { |
| s->dma_tx_ptr += count; |
| } |
| /* QEMU char backends do not have a nonblocking mode, so we transmit all |
| the data immediately and the interrupt status will be unchanged. */ |
| } |
| |
| /* Initiate RX DMA, and transfer data from the FIFO. */ |
| static void dma_rx_start(SyborgSerialState *s, uint32_t len) |
| { |
| uint32_t dest; |
| unsigned char ch; |
| |
| dest = s->dma_rx_ptr; |
| if (s->read_count < len) { |
| s->dma_rx_size = len - s->read_count; |
| len = s->read_count; |
| } else { |
| s->dma_rx_size = 0; |
| } |
| |
| while (len--) { |
| ch = fifo_pop(s); |
| cpu_physical_memory_write(dest, &ch, 1); |
| dest++; |
| } |
| s->dma_rx_ptr = dest; |
| syborg_serial_update(s); |
| } |
| |
| static uint64_t syborg_serial_read(void *opaque, target_phys_addr_t offset, |
| unsigned size) |
| { |
| SyborgSerialState *s = (SyborgSerialState *)opaque; |
| uint32_t c; |
| |
| offset &= 0xfff; |
| DPRINTF("read 0x%x\n", (int)offset); |
| switch(offset >> 2) { |
| case SERIAL_ID: |
| return SYBORG_ID_SERIAL; |
| case SERIAL_DATA: |
| if (s->read_count > 0) |
| c = fifo_pop(s); |
| else |
| c = -1; |
| syborg_serial_update(s); |
| return c; |
| case SERIAL_FIFO_COUNT: |
| return s->read_count; |
| case SERIAL_INT_ENABLE: |
| return s->int_enable; |
| case SERIAL_DMA_TX_ADDR: |
| return s->dma_tx_ptr; |
| case SERIAL_DMA_TX_COUNT: |
| return 0; |
| case SERIAL_DMA_RX_ADDR: |
| return s->dma_rx_ptr; |
| case SERIAL_DMA_RX_COUNT: |
| return s->dma_rx_size; |
| case SERIAL_FIFO_SIZE: |
| return s->fifo_size; |
| |
| default: |
| cpu_abort(cpu_single_env, "syborg_serial_read: Bad offset %x\n", |
| (int)offset); |
| return 0; |
| } |
| } |
| |
| static void syborg_serial_write(void *opaque, target_phys_addr_t offset, |
| uint64_t value, unsigned size) |
| { |
| SyborgSerialState *s = (SyborgSerialState *)opaque; |
| unsigned char ch; |
| |
| offset &= 0xfff; |
| DPRINTF("Write 0x%x=0x%x\n", (int)offset, value); |
| switch (offset >> 2) { |
| case SERIAL_DATA: |
| ch = value; |
| if (s->chr) |
| qemu_chr_fe_write(s->chr, &ch, 1); |
| break; |
| case SERIAL_INT_ENABLE: |
| s->int_enable = value; |
| syborg_serial_update(s); |
| break; |
| case SERIAL_DMA_TX_ADDR: |
| s->dma_tx_ptr = value; |
| break; |
| case SERIAL_DMA_TX_COUNT: |
| do_dma_tx(s, value); |
| break; |
| case SERIAL_DMA_RX_ADDR: |
| /* For safety, writes to this register cancel any pending DMA. */ |
| s->dma_rx_size = 0; |
| s->dma_rx_ptr = value; |
| break; |
| case SERIAL_DMA_RX_COUNT: |
| dma_rx_start(s, value); |
| break; |
| default: |
| cpu_abort(cpu_single_env, "syborg_serial_write: Bad offset %x\n", |
| (int)offset); |
| break; |
| } |
| } |
| |
| static int syborg_serial_can_receive(void *opaque) |
| { |
| SyborgSerialState *s = (SyborgSerialState *)opaque; |
| |
| if (s->dma_rx_size) |
| return s->dma_rx_size; |
| return s->fifo_size - s->read_count; |
| } |
| |
| static void syborg_serial_receive(void *opaque, const uint8_t *buf, int size) |
| { |
| SyborgSerialState *s = (SyborgSerialState *)opaque; |
| |
| if (s->dma_rx_size) { |
| /* Place it in the DMA buffer. */ |
| cpu_physical_memory_write(s->dma_rx_ptr, buf, size); |
| s->dma_rx_size -= size; |
| s->dma_rx_ptr += size; |
| } else { |
| while (size--) |
| fifo_push(s, *buf); |
| } |
| |
| syborg_serial_update(s); |
| } |
| |
| static void syborg_serial_event(void *opaque, int event) |
| { |
| /* TODO: Report BREAK events? */ |
| } |
| |
| static const MemoryRegionOps syborg_serial_ops = { |
| .read = syborg_serial_read, |
| .write = syborg_serial_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static const VMStateDescription vmstate_syborg_serial = { |
| .name = "syborg_serial", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_EQUAL(fifo_size, SyborgSerialState), |
| VMSTATE_UINT32(int_enable, SyborgSerialState), |
| VMSTATE_INT32(read_pos, SyborgSerialState), |
| VMSTATE_INT32(read_count, SyborgSerialState), |
| VMSTATE_UINT32(dma_tx_ptr, SyborgSerialState), |
| VMSTATE_UINT32(dma_rx_ptr, SyborgSerialState), |
| VMSTATE_UINT32(dma_rx_size, SyborgSerialState), |
| VMSTATE_VARRAY_UINT32(read_fifo, SyborgSerialState, fifo_size, 1, |
| vmstate_info_uint32, uint32), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static int syborg_serial_init(SysBusDevice *dev) |
| { |
| SyborgSerialState *s = FROM_SYSBUS(SyborgSerialState, dev); |
| |
| sysbus_init_irq(dev, &s->irq); |
| memory_region_init_io(&s->iomem, &syborg_serial_ops, s, |
| "serial", 0x1000); |
| sysbus_init_mmio_region(dev, &s->iomem); |
| s->chr = qdev_init_chardev(&dev->qdev); |
| if (s->chr) { |
| qemu_chr_add_handlers(s->chr, syborg_serial_can_receive, |
| syborg_serial_receive, syborg_serial_event, s); |
| } |
| if (s->fifo_size <= 0) { |
| fprintf(stderr, "syborg_serial: fifo too small\n"); |
| s->fifo_size = 16; |
| } |
| s->read_fifo = g_malloc0(s->fifo_size * sizeof(s->read_fifo[0])); |
| |
| return 0; |
| } |
| |
| static SysBusDeviceInfo syborg_serial_info = { |
| .init = syborg_serial_init, |
| .qdev.name = "syborg,serial", |
| .qdev.size = sizeof(SyborgSerialState), |
| .qdev.vmsd = &vmstate_syborg_serial, |
| .qdev.props = (Property[]) { |
| DEFINE_PROP_UINT32("fifo-size", SyborgSerialState, fifo_size, 16), |
| DEFINE_PROP_END_OF_LIST(), |
| } |
| }; |
| |
| static void syborg_serial_register_devices(void) |
| { |
| sysbus_register_withprop(&syborg_serial_info); |
| } |
| |
| device_init(syborg_serial_register_devices) |