| /* |
| * internal execution defines for qemu |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef EXEC_ALL_H |
| #define EXEC_ALL_H |
| |
| #include "cpu.h" |
| #if defined(CONFIG_USER_ONLY) |
| #include "exec/cpu_ldst.h" |
| #endif |
| #include "exec/translation-block.h" |
| #include "qemu/clang-tsa.h" |
| |
| /** |
| * cpu_loop_exit_requested: |
| * @cpu: The CPU state to be tested |
| * |
| * Indicate if somebody asked for a return of the CPU to the main loop |
| * (e.g., via cpu_exit() or cpu_interrupt()). |
| * |
| * This is helpful for architectures that support interruptible |
| * instructions. After writing back all state to registers/memory, this |
| * call can be used to check if it makes sense to return to the main loop |
| * or to continue executing the interruptible instruction. |
| */ |
| static inline bool cpu_loop_exit_requested(CPUState *cpu) |
| { |
| return (int32_t)qatomic_read(&cpu->neg.icount_decr.u32) < 0; |
| } |
| |
| #if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) |
| /* cputlb.c */ |
| /** |
| * tlb_init - initialize a CPU's TLB |
| * @cpu: CPU whose TLB should be initialized |
| */ |
| void tlb_init(CPUState *cpu); |
| /** |
| * tlb_destroy - destroy a CPU's TLB |
| * @cpu: CPU whose TLB should be destroyed |
| */ |
| void tlb_destroy(CPUState *cpu); |
| /** |
| * tlb_flush_page: |
| * @cpu: CPU whose TLB should be flushed |
| * @addr: virtual address of page to be flushed |
| * |
| * Flush one page from the TLB of the specified CPU, for all |
| * MMU indexes. |
| */ |
| void tlb_flush_page(CPUState *cpu, vaddr addr); |
| /** |
| * tlb_flush_page_all_cpus: |
| * @cpu: src CPU of the flush |
| * @addr: virtual address of page to be flushed |
| * |
| * Flush one page from the TLB of the specified CPU, for all |
| * MMU indexes. |
| */ |
| void tlb_flush_page_all_cpus(CPUState *src, vaddr addr); |
| /** |
| * tlb_flush_page_all_cpus_synced: |
| * @cpu: src CPU of the flush |
| * @addr: virtual address of page to be flushed |
| * |
| * Flush one page from the TLB of the specified CPU, for all MMU |
| * indexes like tlb_flush_page_all_cpus except the source vCPUs work |
| * is scheduled as safe work meaning all flushes will be complete once |
| * the source vCPUs safe work is complete. This will depend on when |
| * the guests translation ends the TB. |
| */ |
| void tlb_flush_page_all_cpus_synced(CPUState *src, vaddr addr); |
| /** |
| * tlb_flush: |
| * @cpu: CPU whose TLB should be flushed |
| * |
| * Flush the entire TLB for the specified CPU. Most CPU architectures |
| * allow the implementation to drop entries from the TLB at any time |
| * so this is generally safe. If more selective flushing is required |
| * use one of the other functions for efficiency. |
| */ |
| void tlb_flush(CPUState *cpu); |
| /** |
| * tlb_flush_all_cpus: |
| * @cpu: src CPU of the flush |
| */ |
| void tlb_flush_all_cpus(CPUState *src_cpu); |
| /** |
| * tlb_flush_all_cpus_synced: |
| * @cpu: src CPU of the flush |
| * |
| * Like tlb_flush_all_cpus except this except the source vCPUs work is |
| * scheduled as safe work meaning all flushes will be complete once |
| * the source vCPUs safe work is complete. This will depend on when |
| * the guests translation ends the TB. |
| */ |
| void tlb_flush_all_cpus_synced(CPUState *src_cpu); |
| /** |
| * tlb_flush_page_by_mmuidx: |
| * @cpu: CPU whose TLB should be flushed |
| * @addr: virtual address of page to be flushed |
| * @idxmap: bitmap of MMU indexes to flush |
| * |
| * Flush one page from the TLB of the specified CPU, for the specified |
| * MMU indexes. |
| */ |
| void tlb_flush_page_by_mmuidx(CPUState *cpu, vaddr addr, |
| uint16_t idxmap); |
| /** |
| * tlb_flush_page_by_mmuidx_all_cpus: |
| * @cpu: Originating CPU of the flush |
| * @addr: virtual address of page to be flushed |
| * @idxmap: bitmap of MMU indexes to flush |
| * |
| * Flush one page from the TLB of all CPUs, for the specified |
| * MMU indexes. |
| */ |
| void tlb_flush_page_by_mmuidx_all_cpus(CPUState *cpu, vaddr addr, |
| uint16_t idxmap); |
| /** |
| * tlb_flush_page_by_mmuidx_all_cpus_synced: |
| * @cpu: Originating CPU of the flush |
| * @addr: virtual address of page to be flushed |
| * @idxmap: bitmap of MMU indexes to flush |
| * |
| * Flush one page from the TLB of all CPUs, for the specified MMU |
| * indexes like tlb_flush_page_by_mmuidx_all_cpus except the source |
| * vCPUs work is scheduled as safe work meaning all flushes will be |
| * complete once the source vCPUs safe work is complete. This will |
| * depend on when the guests translation ends the TB. |
| */ |
| void tlb_flush_page_by_mmuidx_all_cpus_synced(CPUState *cpu, vaddr addr, |
| uint16_t idxmap); |
| /** |
| * tlb_flush_by_mmuidx: |
| * @cpu: CPU whose TLB should be flushed |
| * @wait: If true ensure synchronisation by exiting the cpu_loop |
| * @idxmap: bitmap of MMU indexes to flush |
| * |
| * Flush all entries from the TLB of the specified CPU, for the specified |
| * MMU indexes. |
| */ |
| void tlb_flush_by_mmuidx(CPUState *cpu, uint16_t idxmap); |
| /** |
| * tlb_flush_by_mmuidx_all_cpus: |
| * @cpu: Originating CPU of the flush |
| * @idxmap: bitmap of MMU indexes to flush |
| * |
| * Flush all entries from all TLBs of all CPUs, for the specified |
| * MMU indexes. |
| */ |
| void tlb_flush_by_mmuidx_all_cpus(CPUState *cpu, uint16_t idxmap); |
| /** |
| * tlb_flush_by_mmuidx_all_cpus_synced: |
| * @cpu: Originating CPU of the flush |
| * @idxmap: bitmap of MMU indexes to flush |
| * |
| * Flush all entries from all TLBs of all CPUs, for the specified |
| * MMU indexes like tlb_flush_by_mmuidx_all_cpus except except the source |
| * vCPUs work is scheduled as safe work meaning all flushes will be |
| * complete once the source vCPUs safe work is complete. This will |
| * depend on when the guests translation ends the TB. |
| */ |
| void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu, uint16_t idxmap); |
| |
| /** |
| * tlb_flush_page_bits_by_mmuidx |
| * @cpu: CPU whose TLB should be flushed |
| * @addr: virtual address of page to be flushed |
| * @idxmap: bitmap of mmu indexes to flush |
| * @bits: number of significant bits in address |
| * |
| * Similar to tlb_flush_page_mask, but with a bitmap of indexes. |
| */ |
| void tlb_flush_page_bits_by_mmuidx(CPUState *cpu, vaddr addr, |
| uint16_t idxmap, unsigned bits); |
| |
| /* Similarly, with broadcast and syncing. */ |
| void tlb_flush_page_bits_by_mmuidx_all_cpus(CPUState *cpu, vaddr addr, |
| uint16_t idxmap, unsigned bits); |
| void tlb_flush_page_bits_by_mmuidx_all_cpus_synced |
| (CPUState *cpu, vaddr addr, uint16_t idxmap, unsigned bits); |
| |
| /** |
| * tlb_flush_range_by_mmuidx |
| * @cpu: CPU whose TLB should be flushed |
| * @addr: virtual address of the start of the range to be flushed |
| * @len: length of range to be flushed |
| * @idxmap: bitmap of mmu indexes to flush |
| * @bits: number of significant bits in address |
| * |
| * For each mmuidx in @idxmap, flush all pages within [@addr,@addr+@len), |
| * comparing only the low @bits worth of each virtual page. |
| */ |
| void tlb_flush_range_by_mmuidx(CPUState *cpu, vaddr addr, |
| vaddr len, uint16_t idxmap, |
| unsigned bits); |
| |
| /* Similarly, with broadcast and syncing. */ |
| void tlb_flush_range_by_mmuidx_all_cpus(CPUState *cpu, vaddr addr, |
| vaddr len, uint16_t idxmap, |
| unsigned bits); |
| void tlb_flush_range_by_mmuidx_all_cpus_synced(CPUState *cpu, |
| vaddr addr, |
| vaddr len, |
| uint16_t idxmap, |
| unsigned bits); |
| |
| /** |
| * tlb_set_page_full: |
| * @cpu: CPU context |
| * @mmu_idx: mmu index of the tlb to modify |
| * @addr: virtual address of the entry to add |
| * @full: the details of the tlb entry |
| * |
| * Add an entry to @cpu tlb index @mmu_idx. All of the fields of |
| * @full must be filled, except for xlat_section, and constitute |
| * the complete description of the translated page. |
| * |
| * This is generally called by the target tlb_fill function after |
| * having performed a successful page table walk to find the physical |
| * address and attributes for the translation. |
| * |
| * At most one entry for a given virtual address is permitted. Only a |
| * single TARGET_PAGE_SIZE region is mapped; @full->lg_page_size is only |
| * used by tlb_flush_page. |
| */ |
| void tlb_set_page_full(CPUState *cpu, int mmu_idx, vaddr addr, |
| CPUTLBEntryFull *full); |
| |
| /** |
| * tlb_set_page_with_attrs: |
| * @cpu: CPU to add this TLB entry for |
| * @addr: virtual address of page to add entry for |
| * @paddr: physical address of the page |
| * @attrs: memory transaction attributes |
| * @prot: access permissions (PAGE_READ/PAGE_WRITE/PAGE_EXEC bits) |
| * @mmu_idx: MMU index to insert TLB entry for |
| * @size: size of the page in bytes |
| * |
| * Add an entry to this CPU's TLB (a mapping from virtual address |
| * @addr to physical address @paddr) with the specified memory |
| * transaction attributes. This is generally called by the target CPU |
| * specific code after it has been called through the tlb_fill() |
| * entry point and performed a successful page table walk to find |
| * the physical address and attributes for the virtual address |
| * which provoked the TLB miss. |
| * |
| * At most one entry for a given virtual address is permitted. Only a |
| * single TARGET_PAGE_SIZE region is mapped; the supplied @size is only |
| * used by tlb_flush_page. |
| */ |
| void tlb_set_page_with_attrs(CPUState *cpu, vaddr addr, |
| hwaddr paddr, MemTxAttrs attrs, |
| int prot, int mmu_idx, vaddr size); |
| /* tlb_set_page: |
| * |
| * This function is equivalent to calling tlb_set_page_with_attrs() |
| * with an @attrs argument of MEMTXATTRS_UNSPECIFIED. It's provided |
| * as a convenience for CPUs which don't use memory transaction attributes. |
| */ |
| void tlb_set_page(CPUState *cpu, vaddr addr, |
| hwaddr paddr, int prot, |
| int mmu_idx, vaddr size); |
| #else |
| static inline void tlb_init(CPUState *cpu) |
| { |
| } |
| static inline void tlb_destroy(CPUState *cpu) |
| { |
| } |
| static inline void tlb_flush_page(CPUState *cpu, vaddr addr) |
| { |
| } |
| static inline void tlb_flush_page_all_cpus(CPUState *src, vaddr addr) |
| { |
| } |
| static inline void tlb_flush_page_all_cpus_synced(CPUState *src, vaddr addr) |
| { |
| } |
| static inline void tlb_flush(CPUState *cpu) |
| { |
| } |
| static inline void tlb_flush_all_cpus(CPUState *src_cpu) |
| { |
| } |
| static inline void tlb_flush_all_cpus_synced(CPUState *src_cpu) |
| { |
| } |
| static inline void tlb_flush_page_by_mmuidx(CPUState *cpu, |
| vaddr addr, uint16_t idxmap) |
| { |
| } |
| |
| static inline void tlb_flush_by_mmuidx(CPUState *cpu, uint16_t idxmap) |
| { |
| } |
| static inline void tlb_flush_page_by_mmuidx_all_cpus(CPUState *cpu, |
| vaddr addr, |
| uint16_t idxmap) |
| { |
| } |
| static inline void tlb_flush_page_by_mmuidx_all_cpus_synced(CPUState *cpu, |
| vaddr addr, |
| uint16_t idxmap) |
| { |
| } |
| static inline void tlb_flush_by_mmuidx_all_cpus(CPUState *cpu, uint16_t idxmap) |
| { |
| } |
| |
| static inline void tlb_flush_by_mmuidx_all_cpus_synced(CPUState *cpu, |
| uint16_t idxmap) |
| { |
| } |
| static inline void tlb_flush_page_bits_by_mmuidx(CPUState *cpu, |
| vaddr addr, |
| uint16_t idxmap, |
| unsigned bits) |
| { |
| } |
| static inline void tlb_flush_page_bits_by_mmuidx_all_cpus(CPUState *cpu, |
| vaddr addr, |
| uint16_t idxmap, |
| unsigned bits) |
| { |
| } |
| static inline void |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(CPUState *cpu, vaddr addr, |
| uint16_t idxmap, unsigned bits) |
| { |
| } |
| static inline void tlb_flush_range_by_mmuidx(CPUState *cpu, vaddr addr, |
| vaddr len, uint16_t idxmap, |
| unsigned bits) |
| { |
| } |
| static inline void tlb_flush_range_by_mmuidx_all_cpus(CPUState *cpu, |
| vaddr addr, |
| vaddr len, |
| uint16_t idxmap, |
| unsigned bits) |
| { |
| } |
| static inline void tlb_flush_range_by_mmuidx_all_cpus_synced(CPUState *cpu, |
| vaddr addr, |
| vaddr len, |
| uint16_t idxmap, |
| unsigned bits) |
| { |
| } |
| #endif |
| /** |
| * probe_access: |
| * @env: CPUArchState |
| * @addr: guest virtual address to look up |
| * @size: size of the access |
| * @access_type: read, write or execute permission |
| * @mmu_idx: MMU index to use for lookup |
| * @retaddr: return address for unwinding |
| * |
| * Look up the guest virtual address @addr. Raise an exception if the |
| * page does not satisfy @access_type. Raise an exception if the |
| * access (@addr, @size) hits a watchpoint. For writes, mark a clean |
| * page as dirty. |
| * |
| * Finally, return the host address for a page that is backed by RAM, |
| * or NULL if the page requires I/O. |
| */ |
| void *probe_access(CPUArchState *env, vaddr addr, int size, |
| MMUAccessType access_type, int mmu_idx, uintptr_t retaddr); |
| |
| static inline void *probe_write(CPUArchState *env, vaddr addr, int size, |
| int mmu_idx, uintptr_t retaddr) |
| { |
| return probe_access(env, addr, size, MMU_DATA_STORE, mmu_idx, retaddr); |
| } |
| |
| static inline void *probe_read(CPUArchState *env, vaddr addr, int size, |
| int mmu_idx, uintptr_t retaddr) |
| { |
| return probe_access(env, addr, size, MMU_DATA_LOAD, mmu_idx, retaddr); |
| } |
| |
| /** |
| * probe_access_flags: |
| * @env: CPUArchState |
| * @addr: guest virtual address to look up |
| * @size: size of the access |
| * @access_type: read, write or execute permission |
| * @mmu_idx: MMU index to use for lookup |
| * @nonfault: suppress the fault |
| * @phost: return value for host address |
| * @retaddr: return address for unwinding |
| * |
| * Similar to probe_access, loosely returning the TLB_FLAGS_MASK for |
| * the page, and storing the host address for RAM in @phost. |
| * |
| * If @nonfault is set, do not raise an exception but return TLB_INVALID_MASK. |
| * Do not handle watchpoints, but include TLB_WATCHPOINT in the returned flags. |
| * Do handle clean pages, so exclude TLB_NOTDIRY from the returned flags. |
| * For simplicity, all "mmio-like" flags are folded to TLB_MMIO. |
| */ |
| int probe_access_flags(CPUArchState *env, vaddr addr, int size, |
| MMUAccessType access_type, int mmu_idx, |
| bool nonfault, void **phost, uintptr_t retaddr); |
| |
| #ifndef CONFIG_USER_ONLY |
| /** |
| * probe_access_full: |
| * Like probe_access_flags, except also return into @pfull. |
| * |
| * The CPUTLBEntryFull structure returned via @pfull is transient |
| * and must be consumed or copied immediately, before any further |
| * access or changes to TLB @mmu_idx. |
| */ |
| int probe_access_full(CPUArchState *env, vaddr addr, int size, |
| MMUAccessType access_type, int mmu_idx, |
| bool nonfault, void **phost, |
| CPUTLBEntryFull **pfull, uintptr_t retaddr); |
| |
| /** |
| * probe_access_mmu() - Like probe_access_full except cannot fault and |
| * doesn't trigger instrumentation. |
| * |
| * @env: CPUArchState |
| * @vaddr: virtual address to probe |
| * @size: size of the probe |
| * @access_type: read, write or execute permission |
| * @mmu_idx: softmmu index |
| * @phost: ptr to return value host address or NULL |
| * @pfull: ptr to return value CPUTLBEntryFull structure or NULL |
| * |
| * The CPUTLBEntryFull structure returned via @pfull is transient |
| * and must be consumed or copied immediately, before any further |
| * access or changes to TLB @mmu_idx. |
| * |
| * Returns: TLB flags as per probe_access_flags() |
| */ |
| int probe_access_full_mmu(CPUArchState *env, vaddr addr, int size, |
| MMUAccessType access_type, int mmu_idx, |
| void **phost, CPUTLBEntryFull **pfull); |
| |
| #endif |
| |
| /* Hide the qatomic_read to make code a little easier on the eyes */ |
| static inline uint32_t tb_cflags(const TranslationBlock *tb) |
| { |
| return qatomic_read(&tb->cflags); |
| } |
| |
| static inline tb_page_addr_t tb_page_addr0(const TranslationBlock *tb) |
| { |
| #ifdef CONFIG_USER_ONLY |
| return tb->itree.start; |
| #else |
| return tb->page_addr[0]; |
| #endif |
| } |
| |
| static inline tb_page_addr_t tb_page_addr1(const TranslationBlock *tb) |
| { |
| #ifdef CONFIG_USER_ONLY |
| tb_page_addr_t next = tb->itree.last & TARGET_PAGE_MASK; |
| return next == (tb->itree.start & TARGET_PAGE_MASK) ? -1 : next; |
| #else |
| return tb->page_addr[1]; |
| #endif |
| } |
| |
| static inline void tb_set_page_addr0(TranslationBlock *tb, |
| tb_page_addr_t addr) |
| { |
| #ifdef CONFIG_USER_ONLY |
| tb->itree.start = addr; |
| /* |
| * To begin, we record an interval of one byte. When the translation |
| * loop encounters a second page, the interval will be extended to |
| * include the first byte of the second page, which is sufficient to |
| * allow tb_page_addr1() above to work properly. The final corrected |
| * interval will be set by tb_page_add() from tb->size before the |
| * node is added to the interval tree. |
| */ |
| tb->itree.last = addr; |
| #else |
| tb->page_addr[0] = addr; |
| #endif |
| } |
| |
| static inline void tb_set_page_addr1(TranslationBlock *tb, |
| tb_page_addr_t addr) |
| { |
| #ifdef CONFIG_USER_ONLY |
| /* Extend the interval to the first byte of the second page. See above. */ |
| tb->itree.last = addr; |
| #else |
| tb->page_addr[1] = addr; |
| #endif |
| } |
| |
| /* current cflags for hashing/comparison */ |
| uint32_t curr_cflags(CPUState *cpu); |
| |
| /* TranslationBlock invalidate API */ |
| void tb_phys_invalidate(TranslationBlock *tb, tb_page_addr_t page_addr); |
| void tb_invalidate_phys_range(tb_page_addr_t start, tb_page_addr_t last); |
| void tb_set_jmp_target(TranslationBlock *tb, int n, uintptr_t addr); |
| |
| /* GETPC is the true target of the return instruction that we'll execute. */ |
| #if defined(CONFIG_TCG_INTERPRETER) |
| extern __thread uintptr_t tci_tb_ptr; |
| # define GETPC() tci_tb_ptr |
| #else |
| # define GETPC() \ |
| ((uintptr_t)__builtin_extract_return_addr(__builtin_return_address(0))) |
| #endif |
| |
| /* The true return address will often point to a host insn that is part of |
| the next translated guest insn. Adjust the address backward to point to |
| the middle of the call insn. Subtracting one would do the job except for |
| several compressed mode architectures (arm, mips) which set the low bit |
| to indicate the compressed mode; subtracting two works around that. It |
| is also the case that there are no host isas that contain a call insn |
| smaller than 4 bytes, so we don't worry about special-casing this. */ |
| #define GETPC_ADJ 2 |
| |
| #if !defined(CONFIG_USER_ONLY) |
| |
| /** |
| * iotlb_to_section: |
| * @cpu: CPU performing the access |
| * @index: TCG CPU IOTLB entry |
| * |
| * Given a TCG CPU IOTLB entry, return the MemoryRegionSection that |
| * it refers to. @index will have been initially created and returned |
| * by memory_region_section_get_iotlb(). |
| */ |
| struct MemoryRegionSection *iotlb_to_section(CPUState *cpu, |
| hwaddr index, MemTxAttrs attrs); |
| #endif |
| |
| /** |
| * get_page_addr_code_hostp() |
| * @env: CPUArchState |
| * @addr: guest virtual address of guest code |
| * |
| * See get_page_addr_code() (full-system version) for documentation on the |
| * return value. |
| * |
| * Sets *@hostp (when @hostp is non-NULL) as follows. |
| * If the return value is -1, sets *@hostp to NULL. Otherwise, sets *@hostp |
| * to the host address where @addr's content is kept. |
| * |
| * Note: this function can trigger an exception. |
| */ |
| tb_page_addr_t get_page_addr_code_hostp(CPUArchState *env, vaddr addr, |
| void **hostp); |
| |
| /** |
| * get_page_addr_code() |
| * @env: CPUArchState |
| * @addr: guest virtual address of guest code |
| * |
| * If we cannot translate and execute from the entire RAM page, or if |
| * the region is not backed by RAM, returns -1. Otherwise, returns the |
| * ram_addr_t corresponding to the guest code at @addr. |
| * |
| * Note: this function can trigger an exception. |
| */ |
| static inline tb_page_addr_t get_page_addr_code(CPUArchState *env, |
| vaddr addr) |
| { |
| return get_page_addr_code_hostp(env, addr, NULL); |
| } |
| |
| #if defined(CONFIG_USER_ONLY) |
| void TSA_NO_TSA mmap_lock(void); |
| void TSA_NO_TSA mmap_unlock(void); |
| bool have_mmap_lock(void); |
| |
| static inline void mmap_unlock_guard(void *unused) |
| { |
| mmap_unlock(); |
| } |
| |
| #define WITH_MMAP_LOCK_GUARD() \ |
| for (int _mmap_lock_iter __attribute__((cleanup(mmap_unlock_guard))) \ |
| = (mmap_lock(), 0); _mmap_lock_iter == 0; _mmap_lock_iter = 1) |
| |
| /** |
| * adjust_signal_pc: |
| * @pc: raw pc from the host signal ucontext_t. |
| * @is_write: host memory operation was write, or read-modify-write. |
| * |
| * Alter @pc as required for unwinding. Return the type of the |
| * guest memory access -- host reads may be for guest execution. |
| */ |
| MMUAccessType adjust_signal_pc(uintptr_t *pc, bool is_write); |
| |
| /** |
| * handle_sigsegv_accerr_write: |
| * @cpu: the cpu context |
| * @old_set: the sigset_t from the signal ucontext_t |
| * @host_pc: the host pc, adjusted for the signal |
| * @host_addr: the host address of the fault |
| * |
| * Return true if the write fault has been handled, and should be re-tried. |
| */ |
| bool handle_sigsegv_accerr_write(CPUState *cpu, sigset_t *old_set, |
| uintptr_t host_pc, abi_ptr guest_addr); |
| |
| /** |
| * cpu_loop_exit_sigsegv: |
| * @cpu: the cpu context |
| * @addr: the guest address of the fault |
| * @access_type: access was read/write/execute |
| * @maperr: true for invalid page, false for permission fault |
| * @ra: host pc for unwinding |
| * |
| * Use the TCGCPUOps hook to record cpu state, do guest operating system |
| * specific things to raise SIGSEGV, and jump to the main cpu loop. |
| */ |
| G_NORETURN void cpu_loop_exit_sigsegv(CPUState *cpu, target_ulong addr, |
| MMUAccessType access_type, |
| bool maperr, uintptr_t ra); |
| |
| /** |
| * cpu_loop_exit_sigbus: |
| * @cpu: the cpu context |
| * @addr: the guest address of the alignment fault |
| * @access_type: access was read/write/execute |
| * @ra: host pc for unwinding |
| * |
| * Use the TCGCPUOps hook to record cpu state, do guest operating system |
| * specific things to raise SIGBUS, and jump to the main cpu loop. |
| */ |
| G_NORETURN void cpu_loop_exit_sigbus(CPUState *cpu, target_ulong addr, |
| MMUAccessType access_type, |
| uintptr_t ra); |
| |
| #else |
| static inline void mmap_lock(void) {} |
| static inline void mmap_unlock(void) {} |
| #define WITH_MMAP_LOCK_GUARD() |
| |
| void tlb_reset_dirty(CPUState *cpu, ram_addr_t start1, ram_addr_t length); |
| void tlb_set_dirty(CPUState *cpu, vaddr addr); |
| |
| MemoryRegionSection * |
| address_space_translate_for_iotlb(CPUState *cpu, int asidx, hwaddr addr, |
| hwaddr *xlat, hwaddr *plen, |
| MemTxAttrs attrs, int *prot); |
| hwaddr memory_region_section_get_iotlb(CPUState *cpu, |
| MemoryRegionSection *section); |
| #endif |
| |
| #endif |
