| /* |
| * SD Memory Card emulation as defined in the "SD Memory Card Physical |
| * layer specification, Version 1.10." |
| * |
| * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> |
| * Copyright (c) 2007 CodeSourcery |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A |
| * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY |
| * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "hw/hw.h" |
| #include "sysemu/block-backend.h" |
| #include "hw/sd.h" |
| #include "qemu/bitmap.h" |
| |
| //#define DEBUG_SD 1 |
| |
| #ifdef DEBUG_SD |
| #define DPRINTF(fmt, ...) \ |
| do { fprintf(stderr, "SD: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) do {} while(0) |
| #endif |
| |
| #define ACMD41_ENQUIRY_MASK 0x00ffffff |
| |
| typedef enum { |
| sd_r0 = 0, /* no response */ |
| sd_r1, /* normal response command */ |
| sd_r2_i, /* CID register */ |
| sd_r2_s, /* CSD register */ |
| sd_r3, /* OCR register */ |
| sd_r6 = 6, /* Published RCA response */ |
| sd_r7, /* Operating voltage */ |
| sd_r1b = -1, |
| sd_illegal = -2, |
| } sd_rsp_type_t; |
| |
| enum SDCardModes { |
| sd_inactive, |
| sd_card_identification_mode, |
| sd_data_transfer_mode, |
| }; |
| |
| enum SDCardStates { |
| sd_inactive_state = -1, |
| sd_idle_state = 0, |
| sd_ready_state, |
| sd_identification_state, |
| sd_standby_state, |
| sd_transfer_state, |
| sd_sendingdata_state, |
| sd_receivingdata_state, |
| sd_programming_state, |
| sd_disconnect_state, |
| }; |
| |
| struct SDState { |
| uint32_t mode; /* current card mode, one of SDCardModes */ |
| int32_t state; /* current card state, one of SDCardStates */ |
| uint32_t ocr; |
| uint8_t scr[8]; |
| uint8_t cid[16]; |
| uint8_t csd[16]; |
| uint16_t rca; |
| uint32_t card_status; |
| uint8_t sd_status[64]; |
| uint32_t vhs; |
| bool wp_switch; |
| unsigned long *wp_groups; |
| int32_t wpgrps_size; |
| uint64_t size; |
| uint32_t blk_len; |
| uint32_t erase_start; |
| uint32_t erase_end; |
| uint8_t pwd[16]; |
| uint32_t pwd_len; |
| uint8_t function_group[6]; |
| |
| bool spi; |
| uint8_t current_cmd; |
| /* True if we will handle the next command as an ACMD. Note that this does |
| * *not* track the APP_CMD status bit! |
| */ |
| bool expecting_acmd; |
| uint32_t blk_written; |
| uint64_t data_start; |
| uint32_t data_offset; |
| uint8_t data[512]; |
| qemu_irq readonly_cb; |
| qemu_irq inserted_cb; |
| BlockBackend *blk; |
| uint8_t *buf; |
| |
| bool enable; |
| }; |
| |
| static void sd_set_mode(SDState *sd) |
| { |
| switch (sd->state) { |
| case sd_inactive_state: |
| sd->mode = sd_inactive; |
| break; |
| |
| case sd_idle_state: |
| case sd_ready_state: |
| case sd_identification_state: |
| sd->mode = sd_card_identification_mode; |
| break; |
| |
| case sd_standby_state: |
| case sd_transfer_state: |
| case sd_sendingdata_state: |
| case sd_receivingdata_state: |
| case sd_programming_state: |
| case sd_disconnect_state: |
| sd->mode = sd_data_transfer_mode; |
| break; |
| } |
| } |
| |
| static const sd_cmd_type_t sd_cmd_type[64] = { |
| sd_bc, sd_none, sd_bcr, sd_bcr, sd_none, sd_none, sd_none, sd_ac, |
| sd_bcr, sd_ac, sd_ac, sd_adtc, sd_ac, sd_ac, sd_none, sd_ac, |
| sd_ac, sd_adtc, sd_adtc, sd_none, sd_none, sd_none, sd_none, sd_none, |
| sd_adtc, sd_adtc, sd_adtc, sd_adtc, sd_ac, sd_ac, sd_adtc, sd_none, |
| sd_ac, sd_ac, sd_none, sd_none, sd_none, sd_none, sd_ac, sd_none, |
| sd_none, sd_none, sd_bc, sd_none, sd_none, sd_none, sd_none, sd_none, |
| sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_ac, |
| sd_adtc, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, |
| }; |
| |
| static const int sd_cmd_class[64] = { |
| 0, 0, 0, 0, 0, 9, 10, 0, 0, 0, 0, 1, 0, 0, 0, 0, |
| 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 6, 6, 6, 6, |
| 5, 5, 10, 10, 10, 10, 5, 9, 9, 9, 7, 7, 7, 7, 7, 7, |
| 7, 7, 10, 7, 9, 9, 9, 8, 8, 10, 8, 8, 8, 8, 8, 8, |
| }; |
| |
| static uint8_t sd_crc7(void *message, size_t width) |
| { |
| int i, bit; |
| uint8_t shift_reg = 0x00; |
| uint8_t *msg = (uint8_t *) message; |
| |
| for (i = 0; i < width; i ++, msg ++) |
| for (bit = 7; bit >= 0; bit --) { |
| shift_reg <<= 1; |
| if ((shift_reg >> 7) ^ ((*msg >> bit) & 1)) |
| shift_reg ^= 0x89; |
| } |
| |
| return shift_reg; |
| } |
| |
| static uint16_t sd_crc16(void *message, size_t width) |
| { |
| int i, bit; |
| uint16_t shift_reg = 0x0000; |
| uint16_t *msg = (uint16_t *) message; |
| width <<= 1; |
| |
| for (i = 0; i < width; i ++, msg ++) |
| for (bit = 15; bit >= 0; bit --) { |
| shift_reg <<= 1; |
| if ((shift_reg >> 15) ^ ((*msg >> bit) & 1)) |
| shift_reg ^= 0x1011; |
| } |
| |
| return shift_reg; |
| } |
| |
| static void sd_set_ocr(SDState *sd) |
| { |
| /* All voltages OK, card power-up OK, Standard Capacity SD Memory Card */ |
| sd->ocr = 0x80ffff00; |
| } |
| |
| static void sd_set_scr(SDState *sd) |
| { |
| sd->scr[0] = 0x00; /* SCR Structure */ |
| sd->scr[1] = 0x2f; /* SD Security Support */ |
| sd->scr[2] = 0x00; |
| sd->scr[3] = 0x00; |
| sd->scr[4] = 0x00; |
| sd->scr[5] = 0x00; |
| sd->scr[6] = 0x00; |
| sd->scr[7] = 0x00; |
| } |
| |
| #define MID 0xaa |
| #define OID "XY" |
| #define PNM "QEMU!" |
| #define PRV 0x01 |
| #define MDT_YR 2006 |
| #define MDT_MON 2 |
| |
| static void sd_set_cid(SDState *sd) |
| { |
| sd->cid[0] = MID; /* Fake card manufacturer ID (MID) */ |
| sd->cid[1] = OID[0]; /* OEM/Application ID (OID) */ |
| sd->cid[2] = OID[1]; |
| sd->cid[3] = PNM[0]; /* Fake product name (PNM) */ |
| sd->cid[4] = PNM[1]; |
| sd->cid[5] = PNM[2]; |
| sd->cid[6] = PNM[3]; |
| sd->cid[7] = PNM[4]; |
| sd->cid[8] = PRV; /* Fake product revision (PRV) */ |
| sd->cid[9] = 0xde; /* Fake serial number (PSN) */ |
| sd->cid[10] = 0xad; |
| sd->cid[11] = 0xbe; |
| sd->cid[12] = 0xef; |
| sd->cid[13] = 0x00 | /* Manufacture date (MDT) */ |
| ((MDT_YR - 2000) / 10); |
| sd->cid[14] = ((MDT_YR % 10) << 4) | MDT_MON; |
| sd->cid[15] = (sd_crc7(sd->cid, 15) << 1) | 1; |
| } |
| |
| #define HWBLOCK_SHIFT 9 /* 512 bytes */ |
| #define SECTOR_SHIFT 5 /* 16 kilobytes */ |
| #define WPGROUP_SHIFT 7 /* 2 megs */ |
| #define CMULT_SHIFT 9 /* 512 times HWBLOCK_SIZE */ |
| #define WPGROUP_SIZE (1 << (HWBLOCK_SHIFT + SECTOR_SHIFT + WPGROUP_SHIFT)) |
| |
| static const uint8_t sd_csd_rw_mask[16] = { |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfe, |
| }; |
| |
| static void sd_set_csd(SDState *sd, uint64_t size) |
| { |
| uint32_t csize = (size >> (CMULT_SHIFT + HWBLOCK_SHIFT)) - 1; |
| uint32_t sectsize = (1 << (SECTOR_SHIFT + 1)) - 1; |
| uint32_t wpsize = (1 << (WPGROUP_SHIFT + 1)) - 1; |
| |
| if (size <= 0x40000000) { /* Standard Capacity SD */ |
| sd->csd[0] = 0x00; /* CSD structure */ |
| sd->csd[1] = 0x26; /* Data read access-time-1 */ |
| sd->csd[2] = 0x00; /* Data read access-time-2 */ |
| sd->csd[3] = 0x5a; /* Max. data transfer rate */ |
| sd->csd[4] = 0x5f; /* Card Command Classes */ |
| sd->csd[5] = 0x50 | /* Max. read data block length */ |
| HWBLOCK_SHIFT; |
| sd->csd[6] = 0xe0 | /* Partial block for read allowed */ |
| ((csize >> 10) & 0x03); |
| sd->csd[7] = 0x00 | /* Device size */ |
| ((csize >> 2) & 0xff); |
| sd->csd[8] = 0x3f | /* Max. read current */ |
| ((csize << 6) & 0xc0); |
| sd->csd[9] = 0xfc | /* Max. write current */ |
| ((CMULT_SHIFT - 2) >> 1); |
| sd->csd[10] = 0x40 | /* Erase sector size */ |
| (((CMULT_SHIFT - 2) << 7) & 0x80) | (sectsize >> 1); |
| sd->csd[11] = 0x00 | /* Write protect group size */ |
| ((sectsize << 7) & 0x80) | wpsize; |
| sd->csd[12] = 0x90 | /* Write speed factor */ |
| (HWBLOCK_SHIFT >> 2); |
| sd->csd[13] = 0x20 | /* Max. write data block length */ |
| ((HWBLOCK_SHIFT << 6) & 0xc0); |
| sd->csd[14] = 0x00; /* File format group */ |
| sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1; |
| } else { /* SDHC */ |
| size /= 512 * 1024; |
| size -= 1; |
| sd->csd[0] = 0x40; |
| sd->csd[1] = 0x0e; |
| sd->csd[2] = 0x00; |
| sd->csd[3] = 0x32; |
| sd->csd[4] = 0x5b; |
| sd->csd[5] = 0x59; |
| sd->csd[6] = 0x00; |
| sd->csd[7] = (size >> 16) & 0xff; |
| sd->csd[8] = (size >> 8) & 0xff; |
| sd->csd[9] = (size & 0xff); |
| sd->csd[10] = 0x7f; |
| sd->csd[11] = 0x80; |
| sd->csd[12] = 0x0a; |
| sd->csd[13] = 0x40; |
| sd->csd[14] = 0x00; |
| sd->csd[15] = 0x00; |
| sd->ocr |= 1 << 30; /* High Capacity SD Memory Card */ |
| } |
| } |
| |
| static void sd_set_rca(SDState *sd) |
| { |
| sd->rca += 0x4567; |
| } |
| |
| /* Card status bits, split by clear condition: |
| * A : According to the card current state |
| * B : Always related to the previous command |
| * C : Cleared by read |
| */ |
| #define CARD_STATUS_A 0x02004100 |
| #define CARD_STATUS_B 0x00c01e00 |
| #define CARD_STATUS_C 0xfd39a028 |
| |
| static void sd_set_cardstatus(SDState *sd) |
| { |
| sd->card_status = 0x00000100; |
| } |
| |
| static void sd_set_sdstatus(SDState *sd) |
| { |
| memset(sd->sd_status, 0, 64); |
| } |
| |
| static int sd_req_crc_validate(SDRequest *req) |
| { |
| uint8_t buffer[5]; |
| buffer[0] = 0x40 | req->cmd; |
| buffer[1] = (req->arg >> 24) & 0xff; |
| buffer[2] = (req->arg >> 16) & 0xff; |
| buffer[3] = (req->arg >> 8) & 0xff; |
| buffer[4] = (req->arg >> 0) & 0xff; |
| return 0; |
| return sd_crc7(buffer, 5) != req->crc; /* TODO */ |
| } |
| |
| static void sd_response_r1_make(SDState *sd, uint8_t *response) |
| { |
| uint32_t status = sd->card_status; |
| /* Clear the "clear on read" status bits */ |
| sd->card_status &= ~CARD_STATUS_C; |
| |
| response[0] = (status >> 24) & 0xff; |
| response[1] = (status >> 16) & 0xff; |
| response[2] = (status >> 8) & 0xff; |
| response[3] = (status >> 0) & 0xff; |
| } |
| |
| static void sd_response_r3_make(SDState *sd, uint8_t *response) |
| { |
| response[0] = (sd->ocr >> 24) & 0xff; |
| response[1] = (sd->ocr >> 16) & 0xff; |
| response[2] = (sd->ocr >> 8) & 0xff; |
| response[3] = (sd->ocr >> 0) & 0xff; |
| } |
| |
| static void sd_response_r6_make(SDState *sd, uint8_t *response) |
| { |
| uint16_t arg; |
| uint16_t status; |
| |
| arg = sd->rca; |
| status = ((sd->card_status >> 8) & 0xc000) | |
| ((sd->card_status >> 6) & 0x2000) | |
| (sd->card_status & 0x1fff); |
| sd->card_status &= ~(CARD_STATUS_C & 0xc81fff); |
| |
| response[0] = (arg >> 8) & 0xff; |
| response[1] = arg & 0xff; |
| response[2] = (status >> 8) & 0xff; |
| response[3] = status & 0xff; |
| } |
| |
| static void sd_response_r7_make(SDState *sd, uint8_t *response) |
| { |
| response[0] = (sd->vhs >> 24) & 0xff; |
| response[1] = (sd->vhs >> 16) & 0xff; |
| response[2] = (sd->vhs >> 8) & 0xff; |
| response[3] = (sd->vhs >> 0) & 0xff; |
| } |
| |
| static inline uint64_t sd_addr_to_wpnum(uint64_t addr) |
| { |
| return addr >> (HWBLOCK_SHIFT + SECTOR_SHIFT + WPGROUP_SHIFT); |
| } |
| |
| static void sd_reset(SDState *sd) |
| { |
| uint64_t size; |
| uint64_t sect; |
| |
| if (sd->blk) { |
| blk_get_geometry(sd->blk, §); |
| } else { |
| sect = 0; |
| } |
| size = sect << 9; |
| |
| sect = sd_addr_to_wpnum(size) + 1; |
| |
| sd->state = sd_idle_state; |
| sd->rca = 0x0000; |
| sd_set_ocr(sd); |
| sd_set_scr(sd); |
| sd_set_cid(sd); |
| sd_set_csd(sd, size); |
| sd_set_cardstatus(sd); |
| sd_set_sdstatus(sd); |
| |
| g_free(sd->wp_groups); |
| sd->wp_switch = sd->blk ? blk_is_read_only(sd->blk) : false; |
| sd->wpgrps_size = sect; |
| sd->wp_groups = bitmap_new(sd->wpgrps_size); |
| memset(sd->function_group, 0, sizeof(sd->function_group)); |
| sd->erase_start = 0; |
| sd->erase_end = 0; |
| sd->size = size; |
| sd->blk_len = 0x200; |
| sd->pwd_len = 0; |
| sd->expecting_acmd = false; |
| } |
| |
| static void sd_cardchange(void *opaque, bool load) |
| { |
| SDState *sd = opaque; |
| |
| qemu_set_irq(sd->inserted_cb, blk_is_inserted(sd->blk)); |
| if (blk_is_inserted(sd->blk)) { |
| sd_reset(sd); |
| qemu_set_irq(sd->readonly_cb, sd->wp_switch); |
| } |
| } |
| |
| static const BlockDevOps sd_block_ops = { |
| .change_media_cb = sd_cardchange, |
| }; |
| |
| static const VMStateDescription sd_vmstate = { |
| .name = "sd-card", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(mode, SDState), |
| VMSTATE_INT32(state, SDState), |
| VMSTATE_UINT8_ARRAY(cid, SDState, 16), |
| VMSTATE_UINT8_ARRAY(csd, SDState, 16), |
| VMSTATE_UINT16(rca, SDState), |
| VMSTATE_UINT32(card_status, SDState), |
| VMSTATE_PARTIAL_BUFFER(sd_status, SDState, 1), |
| VMSTATE_UINT32(vhs, SDState), |
| VMSTATE_BITMAP(wp_groups, SDState, 0, wpgrps_size), |
| VMSTATE_UINT32(blk_len, SDState), |
| VMSTATE_UINT32(erase_start, SDState), |
| VMSTATE_UINT32(erase_end, SDState), |
| VMSTATE_UINT8_ARRAY(pwd, SDState, 16), |
| VMSTATE_UINT32(pwd_len, SDState), |
| VMSTATE_UINT8_ARRAY(function_group, SDState, 6), |
| VMSTATE_UINT8(current_cmd, SDState), |
| VMSTATE_BOOL(expecting_acmd, SDState), |
| VMSTATE_UINT32(blk_written, SDState), |
| VMSTATE_UINT64(data_start, SDState), |
| VMSTATE_UINT32(data_offset, SDState), |
| VMSTATE_UINT8_ARRAY(data, SDState, 512), |
| VMSTATE_BUFFER_POINTER_UNSAFE(buf, SDState, 1, 512), |
| VMSTATE_BOOL(enable, SDState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| /* We do not model the chip select pin, so allow the board to select |
| whether card should be in SSI or MMC/SD mode. It is also up to the |
| board to ensure that ssi transfers only occur when the chip select |
| is asserted. */ |
| SDState *sd_init(BlockBackend *blk, bool is_spi) |
| { |
| SDState *sd; |
| |
| if (blk && blk_is_read_only(blk)) { |
| fprintf(stderr, "sd_init: Cannot use read-only drive\n"); |
| return NULL; |
| } |
| |
| sd = (SDState *) g_malloc0(sizeof(SDState)); |
| sd->buf = blk_blockalign(blk, 512); |
| sd->spi = is_spi; |
| sd->enable = true; |
| sd->blk = blk; |
| sd_reset(sd); |
| if (sd->blk) { |
| blk_attach_dev_nofail(sd->blk, sd); |
| blk_set_dev_ops(sd->blk, &sd_block_ops, sd); |
| } |
| vmstate_register(NULL, -1, &sd_vmstate, sd); |
| return sd; |
| } |
| |
| void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert) |
| { |
| sd->readonly_cb = readonly; |
| sd->inserted_cb = insert; |
| qemu_set_irq(readonly, sd->blk ? blk_is_read_only(sd->blk) : 0); |
| qemu_set_irq(insert, sd->blk ? blk_is_inserted(sd->blk) : 0); |
| } |
| |
| static void sd_erase(SDState *sd) |
| { |
| int i; |
| uint64_t erase_start = sd->erase_start; |
| uint64_t erase_end = sd->erase_end; |
| |
| if (!sd->erase_start || !sd->erase_end) { |
| sd->card_status |= ERASE_SEQ_ERROR; |
| return; |
| } |
| |
| if (extract32(sd->ocr, OCR_CCS_BITN, 1)) { |
| /* High capacity memory card: erase units are 512 byte blocks */ |
| erase_start *= 512; |
| erase_end *= 512; |
| } |
| |
| erase_start = sd_addr_to_wpnum(erase_start); |
| erase_end = sd_addr_to_wpnum(erase_end); |
| sd->erase_start = 0; |
| sd->erase_end = 0; |
| sd->csd[14] |= 0x40; |
| |
| for (i = erase_start; i <= erase_end; i++) { |
| if (test_bit(i, sd->wp_groups)) { |
| sd->card_status |= WP_ERASE_SKIP; |
| } |
| } |
| } |
| |
| static uint32_t sd_wpbits(SDState *sd, uint64_t addr) |
| { |
| uint32_t i, wpnum; |
| uint32_t ret = 0; |
| |
| wpnum = sd_addr_to_wpnum(addr); |
| |
| for (i = 0; i < 32; i++, wpnum++, addr += WPGROUP_SIZE) { |
| if (addr < sd->size && test_bit(wpnum, sd->wp_groups)) { |
| ret |= (1 << i); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void sd_function_switch(SDState *sd, uint32_t arg) |
| { |
| int i, mode, new_func, crc; |
| mode = !!(arg & 0x80000000); |
| |
| sd->data[0] = 0x00; /* Maximum current consumption */ |
| sd->data[1] = 0x01; |
| sd->data[2] = 0x80; /* Supported group 6 functions */ |
| sd->data[3] = 0x01; |
| sd->data[4] = 0x80; /* Supported group 5 functions */ |
| sd->data[5] = 0x01; |
| sd->data[6] = 0x80; /* Supported group 4 functions */ |
| sd->data[7] = 0x01; |
| sd->data[8] = 0x80; /* Supported group 3 functions */ |
| sd->data[9] = 0x01; |
| sd->data[10] = 0x80; /* Supported group 2 functions */ |
| sd->data[11] = 0x43; |
| sd->data[12] = 0x80; /* Supported group 1 functions */ |
| sd->data[13] = 0x03; |
| for (i = 0; i < 6; i ++) { |
| new_func = (arg >> (i * 4)) & 0x0f; |
| if (mode && new_func != 0x0f) |
| sd->function_group[i] = new_func; |
| sd->data[14 + (i >> 1)] = new_func << ((i * 4) & 4); |
| } |
| memset(&sd->data[17], 0, 47); |
| crc = sd_crc16(sd->data, 64); |
| sd->data[65] = crc >> 8; |
| sd->data[66] = crc & 0xff; |
| } |
| |
| static inline bool sd_wp_addr(SDState *sd, uint64_t addr) |
| { |
| return test_bit(sd_addr_to_wpnum(addr), sd->wp_groups); |
| } |
| |
| static void sd_lock_command(SDState *sd) |
| { |
| int erase, lock, clr_pwd, set_pwd, pwd_len; |
| erase = !!(sd->data[0] & 0x08); |
| lock = sd->data[0] & 0x04; |
| clr_pwd = sd->data[0] & 0x02; |
| set_pwd = sd->data[0] & 0x01; |
| |
| if (sd->blk_len > 1) |
| pwd_len = sd->data[1]; |
| else |
| pwd_len = 0; |
| |
| if (erase) { |
| if (!(sd->card_status & CARD_IS_LOCKED) || sd->blk_len > 1 || |
| set_pwd || clr_pwd || lock || sd->wp_switch || |
| (sd->csd[14] & 0x20)) { |
| sd->card_status |= LOCK_UNLOCK_FAILED; |
| return; |
| } |
| bitmap_zero(sd->wp_groups, sd->wpgrps_size); |
| sd->csd[14] &= ~0x10; |
| sd->card_status &= ~CARD_IS_LOCKED; |
| sd->pwd_len = 0; |
| /* Erasing the entire card here! */ |
| fprintf(stderr, "SD: Card force-erased by CMD42\n"); |
| return; |
| } |
| |
| if (sd->blk_len < 2 + pwd_len || |
| pwd_len <= sd->pwd_len || |
| pwd_len > sd->pwd_len + 16) { |
| sd->card_status |= LOCK_UNLOCK_FAILED; |
| return; |
| } |
| |
| if (sd->pwd_len && memcmp(sd->pwd, sd->data + 2, sd->pwd_len)) { |
| sd->card_status |= LOCK_UNLOCK_FAILED; |
| return; |
| } |
| |
| pwd_len -= sd->pwd_len; |
| if ((pwd_len && !set_pwd) || |
| (clr_pwd && (set_pwd || lock)) || |
| (lock && !sd->pwd_len && !set_pwd) || |
| (!set_pwd && !clr_pwd && |
| (((sd->card_status & CARD_IS_LOCKED) && lock) || |
| (!(sd->card_status & CARD_IS_LOCKED) && !lock)))) { |
| sd->card_status |= LOCK_UNLOCK_FAILED; |
| return; |
| } |
| |
| if (set_pwd) { |
| memcpy(sd->pwd, sd->data + 2 + sd->pwd_len, pwd_len); |
| sd->pwd_len = pwd_len; |
| } |
| |
| if (clr_pwd) { |
| sd->pwd_len = 0; |
| } |
| |
| if (lock) |
| sd->card_status |= CARD_IS_LOCKED; |
| else |
| sd->card_status &= ~CARD_IS_LOCKED; |
| } |
| |
| static sd_rsp_type_t sd_normal_command(SDState *sd, |
| SDRequest req) |
| { |
| uint32_t rca = 0x0000; |
| uint64_t addr = (sd->ocr & (1 << 30)) ? (uint64_t) req.arg << 9 : req.arg; |
| |
| /* Not interpreting this as an app command */ |
| sd->card_status &= ~APP_CMD; |
| |
| if (sd_cmd_type[req.cmd] == sd_ac || sd_cmd_type[req.cmd] == sd_adtc) |
| rca = req.arg >> 16; |
| |
| DPRINTF("CMD%d 0x%08x state %d\n", req.cmd, req.arg, sd->state); |
| switch (req.cmd) { |
| /* Basic commands (Class 0 and Class 1) */ |
| case 0: /* CMD0: GO_IDLE_STATE */ |
| switch (sd->state) { |
| case sd_inactive_state: |
| return sd->spi ? sd_r1 : sd_r0; |
| |
| default: |
| sd->state = sd_idle_state; |
| sd_reset(sd); |
| return sd->spi ? sd_r1 : sd_r0; |
| } |
| break; |
| |
| case 1: /* CMD1: SEND_OP_CMD */ |
| if (!sd->spi) |
| goto bad_cmd; |
| |
| sd->state = sd_transfer_state; |
| return sd_r1; |
| |
| case 2: /* CMD2: ALL_SEND_CID */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->state) { |
| case sd_ready_state: |
| sd->state = sd_identification_state; |
| return sd_r2_i; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 3: /* CMD3: SEND_RELATIVE_ADDR */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->state) { |
| case sd_identification_state: |
| case sd_standby_state: |
| sd->state = sd_standby_state; |
| sd_set_rca(sd); |
| return sd_r6; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 4: /* CMD4: SEND_DSR */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->state) { |
| case sd_standby_state: |
| break; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 5: /* CMD5: reserved for SDIO cards */ |
| return sd_illegal; |
| |
| case 6: /* CMD6: SWITCH_FUNCTION */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->mode) { |
| case sd_data_transfer_mode: |
| sd_function_switch(sd, req.arg); |
| sd->state = sd_sendingdata_state; |
| sd->data_start = 0; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 7: /* CMD7: SELECT/DESELECT_CARD */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->state) { |
| case sd_standby_state: |
| if (sd->rca != rca) |
| return sd_r0; |
| |
| sd->state = sd_transfer_state; |
| return sd_r1b; |
| |
| case sd_transfer_state: |
| case sd_sendingdata_state: |
| if (sd->rca == rca) |
| break; |
| |
| sd->state = sd_standby_state; |
| return sd_r1b; |
| |
| case sd_disconnect_state: |
| if (sd->rca != rca) |
| return sd_r0; |
| |
| sd->state = sd_programming_state; |
| return sd_r1b; |
| |
| case sd_programming_state: |
| if (sd->rca == rca) |
| break; |
| |
| sd->state = sd_disconnect_state; |
| return sd_r1b; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 8: /* CMD8: SEND_IF_COND */ |
| /* Physical Layer Specification Version 2.00 command */ |
| switch (sd->state) { |
| case sd_idle_state: |
| sd->vhs = 0; |
| |
| /* No response if not exactly one VHS bit is set. */ |
| if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) { |
| return sd->spi ? sd_r7 : sd_r0; |
| } |
| |
| /* Accept. */ |
| sd->vhs = req.arg; |
| return sd_r7; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 9: /* CMD9: SEND_CSD */ |
| switch (sd->state) { |
| case sd_standby_state: |
| if (sd->rca != rca) |
| return sd_r0; |
| |
| return sd_r2_s; |
| |
| case sd_transfer_state: |
| if (!sd->spi) |
| break; |
| sd->state = sd_sendingdata_state; |
| memcpy(sd->data, sd->csd, 16); |
| sd->data_start = addr; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 10: /* CMD10: SEND_CID */ |
| switch (sd->state) { |
| case sd_standby_state: |
| if (sd->rca != rca) |
| return sd_r0; |
| |
| return sd_r2_i; |
| |
| case sd_transfer_state: |
| if (!sd->spi) |
| break; |
| sd->state = sd_sendingdata_state; |
| memcpy(sd->data, sd->cid, 16); |
| sd->data_start = addr; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 11: /* CMD11: READ_DAT_UNTIL_STOP */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_sendingdata_state; |
| sd->data_start = req.arg; |
| sd->data_offset = 0; |
| |
| if (sd->data_start + sd->blk_len > sd->size) |
| sd->card_status |= ADDRESS_ERROR; |
| return sd_r0; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 12: /* CMD12: STOP_TRANSMISSION */ |
| switch (sd->state) { |
| case sd_sendingdata_state: |
| sd->state = sd_transfer_state; |
| return sd_r1b; |
| |
| case sd_receivingdata_state: |
| sd->state = sd_programming_state; |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| return sd_r1b; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 13: /* CMD13: SEND_STATUS */ |
| switch (sd->mode) { |
| case sd_data_transfer_mode: |
| if (sd->rca != rca) |
| return sd_r0; |
| |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 15: /* CMD15: GO_INACTIVE_STATE */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->mode) { |
| case sd_data_transfer_mode: |
| if (sd->rca != rca) |
| return sd_r0; |
| |
| sd->state = sd_inactive_state; |
| return sd_r0; |
| |
| default: |
| break; |
| } |
| break; |
| |
| /* Block read commands (Classs 2) */ |
| case 16: /* CMD16: SET_BLOCKLEN */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| if (req.arg > (1 << HWBLOCK_SHIFT)) |
| sd->card_status |= BLOCK_LEN_ERROR; |
| else |
| sd->blk_len = req.arg; |
| |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 17: /* CMD17: READ_SINGLE_BLOCK */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_sendingdata_state; |
| sd->data_start = addr; |
| sd->data_offset = 0; |
| |
| if (sd->data_start + sd->blk_len > sd->size) |
| sd->card_status |= ADDRESS_ERROR; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 18: /* CMD18: READ_MULTIPLE_BLOCK */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_sendingdata_state; |
| sd->data_start = addr; |
| sd->data_offset = 0; |
| |
| if (sd->data_start + sd->blk_len > sd->size) |
| sd->card_status |= ADDRESS_ERROR; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| /* Block write commands (Class 4) */ |
| case 24: /* CMD24: WRITE_SINGLE_BLOCK */ |
| if (sd->spi) |
| goto unimplemented_cmd; |
| switch (sd->state) { |
| case sd_transfer_state: |
| /* Writing in SPI mode not implemented. */ |
| if (sd->spi) |
| break; |
| sd->state = sd_receivingdata_state; |
| sd->data_start = addr; |
| sd->data_offset = 0; |
| sd->blk_written = 0; |
| |
| if (sd->data_start + sd->blk_len > sd->size) |
| sd->card_status |= ADDRESS_ERROR; |
| if (sd_wp_addr(sd, sd->data_start)) |
| sd->card_status |= WP_VIOLATION; |
| if (sd->csd[14] & 0x30) |
| sd->card_status |= WP_VIOLATION; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 25: /* CMD25: WRITE_MULTIPLE_BLOCK */ |
| if (sd->spi) |
| goto unimplemented_cmd; |
| switch (sd->state) { |
| case sd_transfer_state: |
| /* Writing in SPI mode not implemented. */ |
| if (sd->spi) |
| break; |
| sd->state = sd_receivingdata_state; |
| sd->data_start = addr; |
| sd->data_offset = 0; |
| sd->blk_written = 0; |
| |
| if (sd->data_start + sd->blk_len > sd->size) |
| sd->card_status |= ADDRESS_ERROR; |
| if (sd_wp_addr(sd, sd->data_start)) |
| sd->card_status |= WP_VIOLATION; |
| if (sd->csd[14] & 0x30) |
| sd->card_status |= WP_VIOLATION; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 26: /* CMD26: PROGRAM_CID */ |
| if (sd->spi) |
| goto bad_cmd; |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_receivingdata_state; |
| sd->data_start = 0; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 27: /* CMD27: PROGRAM_CSD */ |
| if (sd->spi) |
| goto unimplemented_cmd; |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_receivingdata_state; |
| sd->data_start = 0; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| /* Write protection (Class 6) */ |
| case 28: /* CMD28: SET_WRITE_PROT */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| if (addr >= sd->size) { |
| sd->card_status |= ADDRESS_ERROR; |
| return sd_r1b; |
| } |
| |
| sd->state = sd_programming_state; |
| set_bit(sd_addr_to_wpnum(addr), sd->wp_groups); |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| return sd_r1b; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 29: /* CMD29: CLR_WRITE_PROT */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| if (addr >= sd->size) { |
| sd->card_status |= ADDRESS_ERROR; |
| return sd_r1b; |
| } |
| |
| sd->state = sd_programming_state; |
| clear_bit(sd_addr_to_wpnum(addr), sd->wp_groups); |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| return sd_r1b; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 30: /* CMD30: SEND_WRITE_PROT */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_sendingdata_state; |
| *(uint32_t *) sd->data = sd_wpbits(sd, req.arg); |
| sd->data_start = addr; |
| sd->data_offset = 0; |
| return sd_r1b; |
| |
| default: |
| break; |
| } |
| break; |
| |
| /* Erase commands (Class 5) */ |
| case 32: /* CMD32: ERASE_WR_BLK_START */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->erase_start = req.arg; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 33: /* CMD33: ERASE_WR_BLK_END */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->erase_end = req.arg; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 38: /* CMD38: ERASE */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| if (sd->csd[14] & 0x30) { |
| sd->card_status |= WP_VIOLATION; |
| return sd_r1b; |
| } |
| |
| sd->state = sd_programming_state; |
| sd_erase(sd); |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| return sd_r1b; |
| |
| default: |
| break; |
| } |
| break; |
| |
| /* Lock card commands (Class 7) */ |
| case 42: /* CMD42: LOCK_UNLOCK */ |
| if (sd->spi) |
| goto unimplemented_cmd; |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_receivingdata_state; |
| sd->data_start = 0; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 52: |
| case 53: |
| /* CMD52, CMD53: reserved for SDIO cards |
| * (see the SDIO Simplified Specification V2.0) |
| * Handle as illegal command but do not complain |
| * on stderr, as some OSes may use these in their |
| * probing for presence of an SDIO card. |
| */ |
| return sd_illegal; |
| |
| /* Application specific commands (Class 8) */ |
| case 55: /* CMD55: APP_CMD */ |
| if (sd->rca != rca) |
| return sd_r0; |
| |
| sd->expecting_acmd = true; |
| sd->card_status |= APP_CMD; |
| return sd_r1; |
| |
| case 56: /* CMD56: GEN_CMD */ |
| fprintf(stderr, "SD: GEN_CMD 0x%08x\n", req.arg); |
| |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->data_offset = 0; |
| if (req.arg & 1) |
| sd->state = sd_sendingdata_state; |
| else |
| sd->state = sd_receivingdata_state; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| default: |
| bad_cmd: |
| fprintf(stderr, "SD: Unknown CMD%i\n", req.cmd); |
| return sd_illegal; |
| |
| unimplemented_cmd: |
| /* Commands that are recognised but not yet implemented in SPI mode. */ |
| fprintf(stderr, "SD: CMD%i not implemented in SPI mode\n", req.cmd); |
| return sd_illegal; |
| } |
| |
| fprintf(stderr, "SD: CMD%i in a wrong state\n", req.cmd); |
| return sd_illegal; |
| } |
| |
| static sd_rsp_type_t sd_app_command(SDState *sd, |
| SDRequest req) |
| { |
| DPRINTF("ACMD%d 0x%08x\n", req.cmd, req.arg); |
| sd->card_status |= APP_CMD; |
| switch (req.cmd) { |
| case 6: /* ACMD6: SET_BUS_WIDTH */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->sd_status[0] &= 0x3f; |
| sd->sd_status[0] |= (req.arg & 0x03) << 6; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 13: /* ACMD13: SD_STATUS */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_sendingdata_state; |
| sd->data_start = 0; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 22: /* ACMD22: SEND_NUM_WR_BLOCKS */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| *(uint32_t *) sd->data = sd->blk_written; |
| |
| sd->state = sd_sendingdata_state; |
| sd->data_start = 0; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 23: /* ACMD23: SET_WR_BLK_ERASE_COUNT */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 41: /* ACMD41: SD_APP_OP_COND */ |
| if (sd->spi) { |
| /* SEND_OP_CMD */ |
| sd->state = sd_transfer_state; |
| return sd_r1; |
| } |
| switch (sd->state) { |
| case sd_idle_state: |
| /* We accept any voltage. 10000 V is nothing. |
| * |
| * We don't model init delay so just advance straight to ready state |
| * unless it's an enquiry ACMD41 (bits 23:0 == 0). |
| */ |
| if (req.arg & ACMD41_ENQUIRY_MASK) { |
| sd->state = sd_ready_state; |
| } |
| |
| return sd_r3; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 42: /* ACMD42: SET_CLR_CARD_DETECT */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| /* Bringing in the 50KOhm pull-up resistor... Done. */ |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| case 51: /* ACMD51: SEND_SCR */ |
| switch (sd->state) { |
| case sd_transfer_state: |
| sd->state = sd_sendingdata_state; |
| sd->data_start = 0; |
| sd->data_offset = 0; |
| return sd_r1; |
| |
| default: |
| break; |
| } |
| break; |
| |
| default: |
| /* Fall back to standard commands. */ |
| return sd_normal_command(sd, req); |
| } |
| |
| fprintf(stderr, "SD: ACMD%i in a wrong state\n", req.cmd); |
| return sd_illegal; |
| } |
| |
| static int cmd_valid_while_locked(SDState *sd, SDRequest *req) |
| { |
| /* Valid commands in locked state: |
| * basic class (0) |
| * lock card class (7) |
| * CMD16 |
| * implicitly, the ACMD prefix CMD55 |
| * ACMD41 and ACMD42 |
| * Anything else provokes an "illegal command" response. |
| */ |
| if (sd->expecting_acmd) { |
| return req->cmd == 41 || req->cmd == 42; |
| } |
| if (req->cmd == 16 || req->cmd == 55) { |
| return 1; |
| } |
| return sd_cmd_class[req->cmd] == 0 || sd_cmd_class[req->cmd] == 7; |
| } |
| |
| int sd_do_command(SDState *sd, SDRequest *req, |
| uint8_t *response) { |
| int last_state; |
| sd_rsp_type_t rtype; |
| int rsplen; |
| |
| if (!sd->blk || !blk_is_inserted(sd->blk) || !sd->enable) { |
| return 0; |
| } |
| |
| if (sd_req_crc_validate(req)) { |
| sd->card_status |= COM_CRC_ERROR; |
| rtype = sd_illegal; |
| goto send_response; |
| } |
| |
| if (sd->card_status & CARD_IS_LOCKED) { |
| if (!cmd_valid_while_locked(sd, req)) { |
| sd->card_status |= ILLEGAL_COMMAND; |
| sd->expecting_acmd = false; |
| fprintf(stderr, "SD: Card is locked\n"); |
| rtype = sd_illegal; |
| goto send_response; |
| } |
| } |
| |
| last_state = sd->state; |
| sd_set_mode(sd); |
| |
| if (sd->expecting_acmd) { |
| sd->expecting_acmd = false; |
| rtype = sd_app_command(sd, *req); |
| } else { |
| rtype = sd_normal_command(sd, *req); |
| } |
| |
| if (rtype == sd_illegal) { |
| sd->card_status |= ILLEGAL_COMMAND; |
| } else { |
| /* Valid command, we can update the 'state before command' bits. |
| * (Do this now so they appear in r1 responses.) |
| */ |
| sd->current_cmd = req->cmd; |
| sd->card_status &= ~CURRENT_STATE; |
| sd->card_status |= (last_state << 9); |
| } |
| |
| send_response: |
| switch (rtype) { |
| case sd_r1: |
| case sd_r1b: |
| sd_response_r1_make(sd, response); |
| rsplen = 4; |
| break; |
| |
| case sd_r2_i: |
| memcpy(response, sd->cid, sizeof(sd->cid)); |
| rsplen = 16; |
| break; |
| |
| case sd_r2_s: |
| memcpy(response, sd->csd, sizeof(sd->csd)); |
| rsplen = 16; |
| break; |
| |
| case sd_r3: |
| sd_response_r3_make(sd, response); |
| rsplen = 4; |
| break; |
| |
| case sd_r6: |
| sd_response_r6_make(sd, response); |
| rsplen = 4; |
| break; |
| |
| case sd_r7: |
| sd_response_r7_make(sd, response); |
| rsplen = 4; |
| break; |
| |
| case sd_r0: |
| case sd_illegal: |
| default: |
| rsplen = 0; |
| break; |
| } |
| |
| if (rtype != sd_illegal) { |
| /* Clear the "clear on valid command" status bits now we've |
| * sent any response |
| */ |
| sd->card_status &= ~CARD_STATUS_B; |
| } |
| |
| #ifdef DEBUG_SD |
| if (rsplen) { |
| int i; |
| DPRINTF("Response:"); |
| for (i = 0; i < rsplen; i++) |
| fprintf(stderr, " %02x", response[i]); |
| fprintf(stderr, " state %d\n", sd->state); |
| } else { |
| DPRINTF("No response %d\n", sd->state); |
| } |
| #endif |
| |
| return rsplen; |
| } |
| |
| static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) |
| { |
| uint64_t end = addr + len; |
| |
| DPRINTF("sd_blk_read: addr = 0x%08llx, len = %d\n", |
| (unsigned long long) addr, len); |
| if (!sd->blk || blk_read(sd->blk, addr >> 9, sd->buf, 1) < 0) { |
| fprintf(stderr, "sd_blk_read: read error on host side\n"); |
| return; |
| } |
| |
| if (end > (addr & ~511) + 512) { |
| memcpy(sd->data, sd->buf + (addr & 511), 512 - (addr & 511)); |
| |
| if (blk_read(sd->blk, end >> 9, sd->buf, 1) < 0) { |
| fprintf(stderr, "sd_blk_read: read error on host side\n"); |
| return; |
| } |
| memcpy(sd->data + 512 - (addr & 511), sd->buf, end & 511); |
| } else |
| memcpy(sd->data, sd->buf + (addr & 511), len); |
| } |
| |
| static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len) |
| { |
| uint64_t end = addr + len; |
| |
| if ((addr & 511) || len < 512) |
| if (!sd->blk || blk_read(sd->blk, addr >> 9, sd->buf, 1) < 0) { |
| fprintf(stderr, "sd_blk_write: read error on host side\n"); |
| return; |
| } |
| |
| if (end > (addr & ~511) + 512) { |
| memcpy(sd->buf + (addr & 511), sd->data, 512 - (addr & 511)); |
| if (blk_write(sd->blk, addr >> 9, sd->buf, 1) < 0) { |
| fprintf(stderr, "sd_blk_write: write error on host side\n"); |
| return; |
| } |
| |
| if (blk_read(sd->blk, end >> 9, sd->buf, 1) < 0) { |
| fprintf(stderr, "sd_blk_write: read error on host side\n"); |
| return; |
| } |
| memcpy(sd->buf, sd->data + 512 - (addr & 511), end & 511); |
| if (blk_write(sd->blk, end >> 9, sd->buf, 1) < 0) { |
| fprintf(stderr, "sd_blk_write: write error on host side\n"); |
| } |
| } else { |
| memcpy(sd->buf + (addr & 511), sd->data, len); |
| if (!sd->blk || blk_write(sd->blk, addr >> 9, sd->buf, 1) < 0) { |
| fprintf(stderr, "sd_blk_write: write error on host side\n"); |
| } |
| } |
| } |
| |
| #define BLK_READ_BLOCK(a, len) sd_blk_read(sd, a, len) |
| #define BLK_WRITE_BLOCK(a, len) sd_blk_write(sd, a, len) |
| #define APP_READ_BLOCK(a, len) memset(sd->data, 0xec, len) |
| #define APP_WRITE_BLOCK(a, len) |
| |
| void sd_write_data(SDState *sd, uint8_t value) |
| { |
| int i; |
| |
| if (!sd->blk || !blk_is_inserted(sd->blk) || !sd->enable) |
| return; |
| |
| if (sd->state != sd_receivingdata_state) { |
| fprintf(stderr, "sd_write_data: not in Receiving-Data state\n"); |
| return; |
| } |
| |
| if (sd->card_status & (ADDRESS_ERROR | WP_VIOLATION)) |
| return; |
| |
| switch (sd->current_cmd) { |
| case 24: /* CMD24: WRITE_SINGLE_BLOCK */ |
| sd->data[sd->data_offset ++] = value; |
| if (sd->data_offset >= sd->blk_len) { |
| /* TODO: Check CRC before committing */ |
| sd->state = sd_programming_state; |
| BLK_WRITE_BLOCK(sd->data_start, sd->data_offset); |
| sd->blk_written ++; |
| sd->csd[14] |= 0x40; |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| } |
| break; |
| |
| case 25: /* CMD25: WRITE_MULTIPLE_BLOCK */ |
| if (sd->data_offset == 0) { |
| /* Start of the block - let's check the address is valid */ |
| if (sd->data_start + sd->blk_len > sd->size) { |
| sd->card_status |= ADDRESS_ERROR; |
| break; |
| } |
| if (sd_wp_addr(sd, sd->data_start)) { |
| sd->card_status |= WP_VIOLATION; |
| break; |
| } |
| } |
| sd->data[sd->data_offset++] = value; |
| if (sd->data_offset >= sd->blk_len) { |
| /* TODO: Check CRC before committing */ |
| sd->state = sd_programming_state; |
| BLK_WRITE_BLOCK(sd->data_start, sd->data_offset); |
| sd->blk_written++; |
| sd->data_start += sd->blk_len; |
| sd->data_offset = 0; |
| sd->csd[14] |= 0x40; |
| |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_receivingdata_state; |
| } |
| break; |
| |
| case 26: /* CMD26: PROGRAM_CID */ |
| sd->data[sd->data_offset ++] = value; |
| if (sd->data_offset >= sizeof(sd->cid)) { |
| /* TODO: Check CRC before committing */ |
| sd->state = sd_programming_state; |
| for (i = 0; i < sizeof(sd->cid); i ++) |
| if ((sd->cid[i] | 0x00) != sd->data[i]) |
| sd->card_status |= CID_CSD_OVERWRITE; |
| |
| if (!(sd->card_status & CID_CSD_OVERWRITE)) |
| for (i = 0; i < sizeof(sd->cid); i ++) { |
| sd->cid[i] |= 0x00; |
| sd->cid[i] &= sd->data[i]; |
| } |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| } |
| break; |
| |
| case 27: /* CMD27: PROGRAM_CSD */ |
| sd->data[sd->data_offset ++] = value; |
| if (sd->data_offset >= sizeof(sd->csd)) { |
| /* TODO: Check CRC before committing */ |
| sd->state = sd_programming_state; |
| for (i = 0; i < sizeof(sd->csd); i ++) |
| if ((sd->csd[i] | sd_csd_rw_mask[i]) != |
| (sd->data[i] | sd_csd_rw_mask[i])) |
| sd->card_status |= CID_CSD_OVERWRITE; |
| |
| /* Copy flag (OTP) & Permanent write protect */ |
| if (sd->csd[14] & ~sd->data[14] & 0x60) |
| sd->card_status |= CID_CSD_OVERWRITE; |
| |
| if (!(sd->card_status & CID_CSD_OVERWRITE)) |
| for (i = 0; i < sizeof(sd->csd); i ++) { |
| sd->csd[i] |= sd_csd_rw_mask[i]; |
| sd->csd[i] &= sd->data[i]; |
| } |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| } |
| break; |
| |
| case 42: /* CMD42: LOCK_UNLOCK */ |
| sd->data[sd->data_offset ++] = value; |
| if (sd->data_offset >= sd->blk_len) { |
| /* TODO: Check CRC before committing */ |
| sd->state = sd_programming_state; |
| sd_lock_command(sd); |
| /* Bzzzzzzztt .... Operation complete. */ |
| sd->state = sd_transfer_state; |
| } |
| break; |
| |
| case 56: /* CMD56: GEN_CMD */ |
| sd->data[sd->data_offset ++] = value; |
| if (sd->data_offset >= sd->blk_len) { |
| APP_WRITE_BLOCK(sd->data_start, sd->data_offset); |
| sd->state = sd_transfer_state; |
| } |
| break; |
| |
| default: |
| fprintf(stderr, "sd_write_data: unknown command\n"); |
| break; |
| } |
| } |
| |
| uint8_t sd_read_data(SDState *sd) |
| { |
| /* TODO: Append CRCs */ |
| uint8_t ret; |
| int io_len; |
| |
| if (!sd->blk || !blk_is_inserted(sd->blk) || !sd->enable) |
| return 0x00; |
| |
| if (sd->state != sd_sendingdata_state) { |
| fprintf(stderr, "sd_read_data: not in Sending-Data state\n"); |
| return 0x00; |
| } |
| |
| if (sd->card_status & (ADDRESS_ERROR | WP_VIOLATION)) |
| return 0x00; |
| |
| io_len = (sd->ocr & (1 << 30)) ? 512 : sd->blk_len; |
| |
| switch (sd->current_cmd) { |
| case 6: /* CMD6: SWITCH_FUNCTION */ |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= 64) |
| sd->state = sd_transfer_state; |
| break; |
| |
| case 9: /* CMD9: SEND_CSD */ |
| case 10: /* CMD10: SEND_CID */ |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= 16) |
| sd->state = sd_transfer_state; |
| break; |
| |
| case 11: /* CMD11: READ_DAT_UNTIL_STOP */ |
| if (sd->data_offset == 0) |
| BLK_READ_BLOCK(sd->data_start, io_len); |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= io_len) { |
| sd->data_start += io_len; |
| sd->data_offset = 0; |
| if (sd->data_start + io_len > sd->size) { |
| sd->card_status |= ADDRESS_ERROR; |
| break; |
| } |
| } |
| break; |
| |
| case 13: /* ACMD13: SD_STATUS */ |
| ret = sd->sd_status[sd->data_offset ++]; |
| |
| if (sd->data_offset >= sizeof(sd->sd_status)) |
| sd->state = sd_transfer_state; |
| break; |
| |
| case 17: /* CMD17: READ_SINGLE_BLOCK */ |
| if (sd->data_offset == 0) |
| BLK_READ_BLOCK(sd->data_start, io_len); |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= io_len) |
| sd->state = sd_transfer_state; |
| break; |
| |
| case 18: /* CMD18: READ_MULTIPLE_BLOCK */ |
| if (sd->data_offset == 0) |
| BLK_READ_BLOCK(sd->data_start, io_len); |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= io_len) { |
| sd->data_start += io_len; |
| sd->data_offset = 0; |
| if (sd->data_start + io_len > sd->size) { |
| sd->card_status |= ADDRESS_ERROR; |
| break; |
| } |
| } |
| break; |
| |
| case 22: /* ACMD22: SEND_NUM_WR_BLOCKS */ |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= 4) |
| sd->state = sd_transfer_state; |
| break; |
| |
| case 30: /* CMD30: SEND_WRITE_PROT */ |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= 4) |
| sd->state = sd_transfer_state; |
| break; |
| |
| case 51: /* ACMD51: SEND_SCR */ |
| ret = sd->scr[sd->data_offset ++]; |
| |
| if (sd->data_offset >= sizeof(sd->scr)) |
| sd->state = sd_transfer_state; |
| break; |
| |
| case 56: /* CMD56: GEN_CMD */ |
| if (sd->data_offset == 0) |
| APP_READ_BLOCK(sd->data_start, sd->blk_len); |
| ret = sd->data[sd->data_offset ++]; |
| |
| if (sd->data_offset >= sd->blk_len) |
| sd->state = sd_transfer_state; |
| break; |
| |
| default: |
| fprintf(stderr, "sd_read_data: unknown command\n"); |
| return 0x00; |
| } |
| |
| return ret; |
| } |
| |
| bool sd_data_ready(SDState *sd) |
| { |
| return sd->state == sd_sendingdata_state; |
| } |
| |
| void sd_enable(SDState *sd, bool enable) |
| { |
| sd->enable = enable; |
| } |