|  | /* | 
|  | * Vhost-user SCMI virtio device | 
|  | * | 
|  | * SPDX-FileCopyrightText: Red Hat, Inc. | 
|  | * SPDX-License-Identifier: GPL-2.0-or-later | 
|  | * | 
|  | * Implementation based on other vhost-user devices in QEMU. | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include "qapi/error.h" | 
|  | #include "qemu/error-report.h" | 
|  | #include "hw/virtio/virtio-bus.h" | 
|  | #include "hw/virtio/vhost-user-scmi.h" | 
|  | #include "standard-headers/linux/virtio_ids.h" | 
|  | #include "standard-headers/linux/virtio_scmi.h" | 
|  | #include "trace.h" | 
|  |  | 
|  | /* | 
|  | * In this version, we don't support VIRTIO_SCMI_F_SHARED_MEMORY. | 
|  | * Note that VIRTIO_SCMI_F_SHARED_MEMORY is currently not supported in | 
|  | * Linux VirtIO SCMI guest driver. | 
|  | */ | 
|  | static const int feature_bits[] = { | 
|  | VIRTIO_F_VERSION_1, | 
|  | VIRTIO_F_NOTIFY_ON_EMPTY, | 
|  | VIRTIO_RING_F_INDIRECT_DESC, | 
|  | VIRTIO_RING_F_EVENT_IDX, | 
|  | VIRTIO_F_RING_RESET, | 
|  | VIRTIO_SCMI_F_P2A_CHANNELS, | 
|  | VHOST_INVALID_FEATURE_BIT | 
|  | }; | 
|  |  | 
|  | static int vu_scmi_start(VirtIODevice *vdev) | 
|  | { | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  | BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); | 
|  | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); | 
|  | struct vhost_dev *vhost_dev = &scmi->vhost_dev; | 
|  | int ret, i; | 
|  |  | 
|  | if (!k->set_guest_notifiers) { | 
|  | error_report("binding does not support guest notifiers"); | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | ret = vhost_dev_enable_notifiers(vhost_dev, vdev); | 
|  | if (ret < 0) { | 
|  | error_report("Error enabling host notifiers: %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, true); | 
|  | if (ret < 0) { | 
|  | error_report("Error binding guest notifier: %d", ret); | 
|  | goto err_host_notifiers; | 
|  | } | 
|  |  | 
|  | vhost_ack_features(vhost_dev, feature_bits, vdev->guest_features); | 
|  |  | 
|  | ret = vhost_dev_start(vhost_dev, vdev, true); | 
|  | if (ret < 0) { | 
|  | error_report("Error starting vhost-user-scmi: %d", ret); | 
|  | goto err_guest_notifiers; | 
|  | } | 
|  | scmi->started_vu = true; | 
|  |  | 
|  | /* | 
|  | * guest_notifier_mask/pending not used yet, so just unmask | 
|  | * everything here. virtio-pci will do the right thing by | 
|  | * enabling/disabling irqfd. | 
|  | */ | 
|  | for (i = 0; i < scmi->vhost_dev.nvqs; i++) { | 
|  | vhost_virtqueue_mask(vhost_dev, vdev, i, false); | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | err_guest_notifiers: | 
|  | k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false); | 
|  | err_host_notifiers: | 
|  | vhost_dev_disable_notifiers(vhost_dev, vdev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vu_scmi_stop(VirtIODevice *vdev) | 
|  | { | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  | BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); | 
|  | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); | 
|  | struct vhost_dev *vhost_dev = &scmi->vhost_dev; | 
|  | int ret; | 
|  |  | 
|  | /* vhost_dev_is_started() check in the callers is not fully reliable. */ | 
|  | if (!scmi->started_vu) { | 
|  | return; | 
|  | } | 
|  | scmi->started_vu = false; | 
|  |  | 
|  | if (!k->set_guest_notifiers) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | vhost_dev_stop(vhost_dev, vdev, true); | 
|  |  | 
|  | ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false); | 
|  | if (ret < 0) { | 
|  | error_report("vhost guest notifier cleanup failed: %d", ret); | 
|  | return; | 
|  | } | 
|  | vhost_dev_disable_notifiers(vhost_dev, vdev); | 
|  | } | 
|  |  | 
|  | static void vu_scmi_set_status(VirtIODevice *vdev, uint8_t status) | 
|  | { | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  | bool should_start = virtio_device_should_start(vdev, status); | 
|  |  | 
|  | if (!scmi->connected) { | 
|  | return; | 
|  | } | 
|  | if (vhost_dev_is_started(&scmi->vhost_dev) == should_start) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (should_start) { | 
|  | vu_scmi_start(vdev); | 
|  | } else { | 
|  | vu_scmi_stop(vdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static uint64_t vu_scmi_get_features(VirtIODevice *vdev, uint64_t features, | 
|  | Error **errp) | 
|  | { | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  |  | 
|  | return vhost_get_features(&scmi->vhost_dev, feature_bits, features); | 
|  | } | 
|  |  | 
|  | static void vu_scmi_handle_output(VirtIODevice *vdev, VirtQueue *vq) | 
|  | { | 
|  | /* | 
|  | * Not normally called; it's the daemon that handles the queue; | 
|  | * however virtio's cleanup path can call this. | 
|  | */ | 
|  | } | 
|  |  | 
|  | static void vu_scmi_guest_notifier_mask(VirtIODevice *vdev, int idx, bool mask) | 
|  | { | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  |  | 
|  | if (idx == VIRTIO_CONFIG_IRQ_IDX) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | vhost_virtqueue_mask(&scmi->vhost_dev, vdev, idx, mask); | 
|  | } | 
|  |  | 
|  | static bool vu_scmi_guest_notifier_pending(VirtIODevice *vdev, int idx) | 
|  | { | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  |  | 
|  | return vhost_virtqueue_pending(&scmi->vhost_dev, idx); | 
|  | } | 
|  |  | 
|  | static void vu_scmi_connect(DeviceState *dev) | 
|  | { | 
|  | VirtIODevice *vdev = VIRTIO_DEVICE(dev); | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  |  | 
|  | if (scmi->connected) { | 
|  | return; | 
|  | } | 
|  | scmi->connected = true; | 
|  |  | 
|  | /* restore vhost state */ | 
|  | if (virtio_device_started(vdev, vdev->status)) { | 
|  | vu_scmi_start(vdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vu_scmi_disconnect(DeviceState *dev) | 
|  | { | 
|  | VirtIODevice *vdev = VIRTIO_DEVICE(dev); | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev); | 
|  |  | 
|  | if (!scmi->connected) { | 
|  | return; | 
|  | } | 
|  | scmi->connected = false; | 
|  |  | 
|  | if (vhost_dev_is_started(&scmi->vhost_dev)) { | 
|  | vu_scmi_stop(vdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vu_scmi_event(void *opaque, QEMUChrEvent event) | 
|  | { | 
|  | DeviceState *dev = opaque; | 
|  |  | 
|  | switch (event) { | 
|  | case CHR_EVENT_OPENED: | 
|  | vu_scmi_connect(dev); | 
|  | break; | 
|  | case CHR_EVENT_CLOSED: | 
|  | vu_scmi_disconnect(dev); | 
|  | break; | 
|  | case CHR_EVENT_BREAK: | 
|  | case CHR_EVENT_MUX_IN: | 
|  | case CHR_EVENT_MUX_OUT: | 
|  | /* Ignore */ | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserSCMI *scmi) | 
|  | { | 
|  | virtio_delete_queue(scmi->cmd_vq); | 
|  | virtio_delete_queue(scmi->event_vq); | 
|  | g_free(scmi->vhost_dev.vqs); | 
|  | virtio_cleanup(vdev); | 
|  | vhost_user_cleanup(&scmi->vhost_user); | 
|  | } | 
|  |  | 
|  | static void vu_scmi_device_realize(DeviceState *dev, Error **errp) | 
|  | { | 
|  | VirtIODevice *vdev = VIRTIO_DEVICE(dev); | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(dev); | 
|  | int ret; | 
|  |  | 
|  | if (!scmi->chardev.chr) { | 
|  | error_setg(errp, "vhost-user-scmi: chardev is mandatory"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | vdev->host_features |= (1ULL << VIRTIO_SCMI_F_P2A_CHANNELS); | 
|  |  | 
|  | if (!vhost_user_init(&scmi->vhost_user, &scmi->chardev, errp)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | virtio_init(vdev, VIRTIO_ID_SCMI, 0); | 
|  |  | 
|  | scmi->cmd_vq = virtio_add_queue(vdev, 256, vu_scmi_handle_output); | 
|  | scmi->event_vq = virtio_add_queue(vdev, 256, vu_scmi_handle_output); | 
|  | scmi->vhost_dev.nvqs = 2; | 
|  | scmi->vhost_dev.vqs = g_new0(struct vhost_virtqueue, scmi->vhost_dev.nvqs); | 
|  |  | 
|  | ret = vhost_dev_init(&scmi->vhost_dev, &scmi->vhost_user, | 
|  | VHOST_BACKEND_TYPE_USER, 0, errp); | 
|  | if (ret < 0) { | 
|  | error_setg_errno(errp, -ret, | 
|  | "vhost-user-scmi: vhost_dev_init() failed"); | 
|  | do_vhost_user_cleanup(vdev, scmi); | 
|  | return; | 
|  | } | 
|  |  | 
|  | qemu_chr_fe_set_handlers(&scmi->chardev, NULL, NULL, vu_scmi_event, NULL, | 
|  | dev, NULL, true); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void vu_scmi_device_unrealize(DeviceState *dev) | 
|  | { | 
|  | VirtIODevice *vdev = VIRTIO_DEVICE(dev); | 
|  | VHostUserSCMI *scmi = VHOST_USER_SCMI(dev); | 
|  |  | 
|  | vu_scmi_set_status(vdev, 0); | 
|  | vhost_dev_cleanup(&scmi->vhost_dev); | 
|  | do_vhost_user_cleanup(vdev, scmi); | 
|  | } | 
|  |  | 
|  | static const VMStateDescription vu_scmi_vmstate = { | 
|  | .name = "vhost-user-scmi", | 
|  | .unmigratable = 1, | 
|  | }; | 
|  |  | 
|  | static const Property vu_scmi_properties[] = { | 
|  | DEFINE_PROP_CHR("chardev", VHostUserSCMI, chardev), | 
|  | }; | 
|  |  | 
|  | static void vu_scmi_class_init(ObjectClass *klass, void *data) | 
|  | { | 
|  | DeviceClass *dc = DEVICE_CLASS(klass); | 
|  | VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); | 
|  |  | 
|  | device_class_set_props(dc, vu_scmi_properties); | 
|  | dc->vmsd = &vu_scmi_vmstate; | 
|  | set_bit(DEVICE_CATEGORY_INPUT, dc->categories); | 
|  | vdc->realize = vu_scmi_device_realize; | 
|  | vdc->unrealize = vu_scmi_device_unrealize; | 
|  | vdc->get_features = vu_scmi_get_features; | 
|  | vdc->set_status = vu_scmi_set_status; | 
|  | vdc->guest_notifier_mask = vu_scmi_guest_notifier_mask; | 
|  | vdc->guest_notifier_pending = vu_scmi_guest_notifier_pending; | 
|  | } | 
|  |  | 
|  | static const TypeInfo vu_scmi_info = { | 
|  | .name = TYPE_VHOST_USER_SCMI, | 
|  | .parent = TYPE_VIRTIO_DEVICE, | 
|  | .instance_size = sizeof(VHostUserSCMI), | 
|  | .class_init = vu_scmi_class_init, | 
|  | }; | 
|  |  | 
|  | static void vu_scmi_register_types(void) | 
|  | { | 
|  | type_register_static(&vu_scmi_info); | 
|  | } | 
|  |  | 
|  | type_init(vu_scmi_register_types) |