| /* |
| * GPIO Controller for a lot of Freescale SoCs |
| * |
| * Copyright (C) 2014 Freescale Semiconductor, Inc. All rights reserved. |
| * |
| * Author: Alexander Graf, <agraf@suse.de> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/irq.h" |
| #include "hw/sysbus.h" |
| #include "migration/vmstate.h" |
| #include "qemu/module.h" |
| #include "qom/object.h" |
| |
| #define TYPE_MPC8XXX_GPIO "mpc8xxx_gpio" |
| OBJECT_DECLARE_SIMPLE_TYPE(MPC8XXXGPIOState, MPC8XXX_GPIO) |
| |
| struct MPC8XXXGPIOState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| qemu_irq irq; |
| qemu_irq out[32]; |
| |
| uint32_t dir; |
| uint32_t odr; |
| uint32_t dat; |
| uint32_t ier; |
| uint32_t imr; |
| uint32_t icr; |
| }; |
| |
| static const VMStateDescription vmstate_mpc8xxx_gpio = { |
| .name = "mpc8xxx_gpio", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(dir, MPC8XXXGPIOState), |
| VMSTATE_UINT32(odr, MPC8XXXGPIOState), |
| VMSTATE_UINT32(dat, MPC8XXXGPIOState), |
| VMSTATE_UINT32(ier, MPC8XXXGPIOState), |
| VMSTATE_UINT32(imr, MPC8XXXGPIOState), |
| VMSTATE_UINT32(icr, MPC8XXXGPIOState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void mpc8xxx_gpio_update(MPC8XXXGPIOState *s) |
| { |
| qemu_set_irq(s->irq, !!(s->ier & s->imr)); |
| } |
| |
| static uint64_t mpc8xxx_gpio_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| MPC8XXXGPIOState *s = (MPC8XXXGPIOState *)opaque; |
| |
| if (size != 4) { |
| /* All registers are 32bit */ |
| return 0; |
| } |
| |
| switch (offset) { |
| case 0x0: /* Direction */ |
| return s->dir; |
| case 0x4: /* Open Drain */ |
| return s->odr; |
| case 0x8: /* Data */ |
| return s->dat; |
| case 0xC: /* Interrupt Event */ |
| return s->ier; |
| case 0x10: /* Interrupt Mask */ |
| return s->imr; |
| case 0x14: /* Interrupt Control */ |
| return s->icr; |
| default: |
| return 0; |
| } |
| } |
| |
| static void mpc8xxx_write_data(MPC8XXXGPIOState *s, uint32_t new_data) |
| { |
| uint32_t old_data = s->dat; |
| uint32_t diff = old_data ^ new_data; |
| int i; |
| |
| for (i = 0; i < 32; i++) { |
| uint32_t mask = 0x80000000 >> i; |
| if (!(diff & mask)) { |
| continue; |
| } |
| |
| if (s->dir & mask) { |
| /* Output */ |
| qemu_set_irq(s->out[i], (new_data & mask) != 0); |
| } |
| } |
| |
| s->dat = new_data; |
| } |
| |
| static void mpc8xxx_gpio_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| MPC8XXXGPIOState *s = (MPC8XXXGPIOState *)opaque; |
| |
| if (size != 4) { |
| /* All registers are 32bit */ |
| return; |
| } |
| |
| switch (offset) { |
| case 0x0: /* Direction */ |
| s->dir = value; |
| break; |
| case 0x4: /* Open Drain */ |
| s->odr = value; |
| break; |
| case 0x8: /* Data */ |
| mpc8xxx_write_data(s, value); |
| break; |
| case 0xC: /* Interrupt Event */ |
| s->ier &= ~value; |
| break; |
| case 0x10: /* Interrupt Mask */ |
| s->imr = value; |
| break; |
| case 0x14: /* Interrupt Control */ |
| s->icr = value; |
| break; |
| } |
| |
| mpc8xxx_gpio_update(s); |
| } |
| |
| static void mpc8xxx_gpio_reset(DeviceState *dev) |
| { |
| MPC8XXXGPIOState *s = MPC8XXX_GPIO(dev); |
| |
| s->dir = 0; |
| s->odr = 0; |
| s->dat = 0; |
| s->ier = 0; |
| s->imr = 0; |
| s->icr = 0; |
| } |
| |
| static void mpc8xxx_gpio_set_irq(void * opaque, int irq, int level) |
| { |
| MPC8XXXGPIOState *s = (MPC8XXXGPIOState *)opaque; |
| uint32_t mask; |
| |
| mask = 0x80000000 >> irq; |
| if ((s->dir & mask) == 0) { |
| uint32_t old_value = s->dat & mask; |
| |
| s->dat &= ~mask; |
| if (level) |
| s->dat |= mask; |
| |
| if (!(s->icr & irq) || (old_value && !level)) { |
| s->ier |= mask; |
| } |
| |
| mpc8xxx_gpio_update(s); |
| } |
| } |
| |
| static const MemoryRegionOps mpc8xxx_gpio_ops = { |
| .read = mpc8xxx_gpio_read, |
| .write = mpc8xxx_gpio_write, |
| .endianness = DEVICE_BIG_ENDIAN, |
| }; |
| |
| static void mpc8xxx_gpio_initfn(Object *obj) |
| { |
| DeviceState *dev = DEVICE(obj); |
| MPC8XXXGPIOState *s = MPC8XXX_GPIO(obj); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| |
| memory_region_init_io(&s->iomem, obj, &mpc8xxx_gpio_ops, |
| s, "mpc8xxx_gpio", 0x1000); |
| sysbus_init_mmio(sbd, &s->iomem); |
| sysbus_init_irq(sbd, &s->irq); |
| qdev_init_gpio_in(dev, mpc8xxx_gpio_set_irq, 32); |
| qdev_init_gpio_out(dev, s->out, 32); |
| } |
| |
| static void mpc8xxx_gpio_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->vmsd = &vmstate_mpc8xxx_gpio; |
| dc->reset = mpc8xxx_gpio_reset; |
| } |
| |
| static const TypeInfo mpc8xxx_gpio_info = { |
| .name = TYPE_MPC8XXX_GPIO, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(MPC8XXXGPIOState), |
| .instance_init = mpc8xxx_gpio_initfn, |
| .class_init = mpc8xxx_gpio_class_init, |
| }; |
| |
| static void mpc8xxx_gpio_register_types(void) |
| { |
| type_register_static(&mpc8xxx_gpio_info); |
| } |
| |
| type_init(mpc8xxx_gpio_register_types) |