|  | /* | 
|  | * generic functions used by VFIO devices | 
|  | * | 
|  | * Copyright Red Hat, Inc. 2012 | 
|  | * | 
|  | * Authors: | 
|  | *  Alex Williamson <alex.williamson@redhat.com> | 
|  | * | 
|  | * This work is licensed under the terms of the GNU GPL, version 2.  See | 
|  | * the COPYING file in the top-level directory. | 
|  | * | 
|  | * Based on qemu-kvm device-assignment: | 
|  | *  Adapted for KVM by Qumranet. | 
|  | *  Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com) | 
|  | *  Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com) | 
|  | *  Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com) | 
|  | *  Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com) | 
|  | *  Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com) | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include <sys/ioctl.h> | 
|  | #ifdef CONFIG_KVM | 
|  | #include <linux/kvm.h> | 
|  | #endif | 
|  | #include <linux/vfio.h> | 
|  |  | 
|  | #include "hw/vfio/vfio-common.h" | 
|  | #include "hw/vfio/pci.h" | 
|  | #include "exec/address-spaces.h" | 
|  | #include "exec/memory.h" | 
|  | #include "exec/ram_addr.h" | 
|  | #include "hw/hw.h" | 
|  | #include "qemu/error-report.h" | 
|  | #include "qemu/main-loop.h" | 
|  | #include "qemu/range.h" | 
|  | #include "system/kvm.h" | 
|  | #include "system/reset.h" | 
|  | #include "system/runstate.h" | 
|  | #include "trace.h" | 
|  | #include "qapi/error.h" | 
|  | #include "migration/misc.h" | 
|  | #include "migration/blocker.h" | 
|  | #include "migration/qemu-file.h" | 
|  | #include "system/tpm.h" | 
|  |  | 
|  | VFIODeviceList vfio_device_list = | 
|  | QLIST_HEAD_INITIALIZER(vfio_device_list); | 
|  | static QLIST_HEAD(, VFIOAddressSpace) vfio_address_spaces = | 
|  | QLIST_HEAD_INITIALIZER(vfio_address_spaces); | 
|  |  | 
|  | #ifdef CONFIG_KVM | 
|  | /* | 
|  | * We have a single VFIO pseudo device per KVM VM.  Once created it lives | 
|  | * for the life of the VM.  Closing the file descriptor only drops our | 
|  | * reference to it and the device's reference to kvm.  Therefore once | 
|  | * initialized, this file descriptor is only released on QEMU exit and | 
|  | * we'll re-use it should another vfio device be attached before then. | 
|  | */ | 
|  | int vfio_kvm_device_fd = -1; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Device state interfaces | 
|  | */ | 
|  |  | 
|  | bool vfio_mig_active(void) | 
|  | { | 
|  | VFIODevice *vbasedev; | 
|  |  | 
|  | if (QLIST_EMPTY(&vfio_device_list)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &vfio_device_list, global_next) { | 
|  | if (vbasedev->migration_blocker) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static Error *multiple_devices_migration_blocker; | 
|  |  | 
|  | /* | 
|  | * Multiple devices migration is allowed only if all devices support P2P | 
|  | * migration. Single device migration is allowed regardless of P2P migration | 
|  | * support. | 
|  | */ | 
|  | static bool vfio_multiple_devices_migration_is_supported(void) | 
|  | { | 
|  | VFIODevice *vbasedev; | 
|  | unsigned int device_num = 0; | 
|  | bool all_support_p2p = true; | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &vfio_device_list, global_next) { | 
|  | if (vbasedev->migration) { | 
|  | device_num++; | 
|  |  | 
|  | if (!(vbasedev->migration->mig_flags & VFIO_MIGRATION_P2P)) { | 
|  | all_support_p2p = false; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return all_support_p2p || device_num <= 1; | 
|  | } | 
|  |  | 
|  | int vfio_block_multiple_devices_migration(VFIODevice *vbasedev, Error **errp) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (vfio_multiple_devices_migration_is_supported()) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (vbasedev->enable_migration == ON_OFF_AUTO_ON) { | 
|  | error_setg(errp, "Multiple VFIO devices migration is supported only if " | 
|  | "all of them support P2P migration"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (multiple_devices_migration_blocker) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | error_setg(&multiple_devices_migration_blocker, | 
|  | "Multiple VFIO devices migration is supported only if all of " | 
|  | "them support P2P migration"); | 
|  | ret = migrate_add_blocker_normal(&multiple_devices_migration_blocker, errp); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void vfio_unblock_multiple_devices_migration(void) | 
|  | { | 
|  | if (!multiple_devices_migration_blocker || | 
|  | !vfio_multiple_devices_migration_is_supported()) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | migrate_del_blocker(&multiple_devices_migration_blocker); | 
|  | } | 
|  |  | 
|  | bool vfio_viommu_preset(VFIODevice *vbasedev) | 
|  | { | 
|  | return vbasedev->bcontainer->space->as != &address_space_memory; | 
|  | } | 
|  |  | 
|  | static void vfio_set_migration_error(int ret) | 
|  | { | 
|  | if (migration_is_running()) { | 
|  | migration_file_set_error(ret, NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | bool vfio_device_state_is_running(VFIODevice *vbasedev) | 
|  | { | 
|  | VFIOMigration *migration = vbasedev->migration; | 
|  |  | 
|  | return migration->device_state == VFIO_DEVICE_STATE_RUNNING || | 
|  | migration->device_state == VFIO_DEVICE_STATE_RUNNING_P2P; | 
|  | } | 
|  |  | 
|  | bool vfio_device_state_is_precopy(VFIODevice *vbasedev) | 
|  | { | 
|  | VFIOMigration *migration = vbasedev->migration; | 
|  |  | 
|  | return migration->device_state == VFIO_DEVICE_STATE_PRE_COPY || | 
|  | migration->device_state == VFIO_DEVICE_STATE_PRE_COPY_P2P; | 
|  | } | 
|  |  | 
|  | static bool vfio_devices_all_device_dirty_tracking_started( | 
|  | const VFIOContainerBase *bcontainer) | 
|  | { | 
|  | VFIODevice *vbasedev; | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &bcontainer->device_list, container_next) { | 
|  | if (!vbasedev->dirty_tracking) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool vfio_devices_all_dirty_tracking_started( | 
|  | const VFIOContainerBase *bcontainer) | 
|  | { | 
|  | return vfio_devices_all_device_dirty_tracking_started(bcontainer) || | 
|  | bcontainer->dirty_pages_started; | 
|  | } | 
|  |  | 
|  | static bool vfio_log_sync_needed(const VFIOContainerBase *bcontainer) | 
|  | { | 
|  | VFIODevice *vbasedev; | 
|  |  | 
|  | if (!vfio_devices_all_dirty_tracking_started(bcontainer)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &bcontainer->device_list, container_next) { | 
|  | VFIOMigration *migration = vbasedev->migration; | 
|  |  | 
|  | if (!migration) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (vbasedev->pre_copy_dirty_page_tracking == ON_OFF_AUTO_OFF && | 
|  | (vfio_device_state_is_running(vbasedev) || | 
|  | vfio_device_state_is_precopy(vbasedev))) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool vfio_devices_all_device_dirty_tracking(const VFIOContainerBase *bcontainer) | 
|  | { | 
|  | VFIODevice *vbasedev; | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &bcontainer->device_list, container_next) { | 
|  | if (vbasedev->device_dirty_page_tracking == ON_OFF_AUTO_OFF) { | 
|  | return false; | 
|  | } | 
|  | if (!vbasedev->dirty_pages_supported) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool vfio_listener_skipped_section(MemoryRegionSection *section) | 
|  | { | 
|  | return (!memory_region_is_ram(section->mr) && | 
|  | !memory_region_is_iommu(section->mr)) || | 
|  | memory_region_is_protected(section->mr) || | 
|  | /* | 
|  | * Sizing an enabled 64-bit BAR can cause spurious mappings to | 
|  | * addresses in the upper part of the 64-bit address space.  These | 
|  | * are never accessed by the CPU and beyond the address width of | 
|  | * some IOMMU hardware.  TODO: VFIO should tell us the IOMMU width. | 
|  | */ | 
|  | section->offset_within_address_space & (1ULL << 63); | 
|  | } | 
|  |  | 
|  | /* Called with rcu_read_lock held.  */ | 
|  | static bool vfio_get_xlat_addr(IOMMUTLBEntry *iotlb, void **vaddr, | 
|  | ram_addr_t *ram_addr, bool *read_only, | 
|  | Error **errp) | 
|  | { | 
|  | bool ret, mr_has_discard_manager; | 
|  |  | 
|  | ret = memory_get_xlat_addr(iotlb, vaddr, ram_addr, read_only, | 
|  | &mr_has_discard_manager, errp); | 
|  | if (ret && mr_has_discard_manager) { | 
|  | /* | 
|  | * Malicious VMs might trigger discarding of IOMMU-mapped memory. The | 
|  | * pages will remain pinned inside vfio until unmapped, resulting in a | 
|  | * higher memory consumption than expected. If memory would get | 
|  | * populated again later, there would be an inconsistency between pages | 
|  | * pinned by vfio and pages seen by QEMU. This is the case until | 
|  | * unmapped from the IOMMU (e.g., during device reset). | 
|  | * | 
|  | * With malicious guests, we really only care about pinning more memory | 
|  | * than expected. RLIMIT_MEMLOCK set for the user/process can never be | 
|  | * exceeded and can be used to mitigate this problem. | 
|  | */ | 
|  | warn_report_once("Using vfio with vIOMMUs and coordinated discarding of" | 
|  | " RAM (e.g., virtio-mem) works, however, malicious" | 
|  | " guests can trigger pinning of more memory than" | 
|  | " intended via an IOMMU. It's possible to mitigate " | 
|  | " by setting/adjusting RLIMIT_MEMLOCK."); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vfio_iommu_map_notify(IOMMUNotifier *n, IOMMUTLBEntry *iotlb) | 
|  | { | 
|  | VFIOGuestIOMMU *giommu = container_of(n, VFIOGuestIOMMU, n); | 
|  | VFIOContainerBase *bcontainer = giommu->bcontainer; | 
|  | hwaddr iova = iotlb->iova + giommu->iommu_offset; | 
|  | void *vaddr; | 
|  | int ret; | 
|  | Error *local_err = NULL; | 
|  |  | 
|  | trace_vfio_iommu_map_notify(iotlb->perm == IOMMU_NONE ? "UNMAP" : "MAP", | 
|  | iova, iova + iotlb->addr_mask); | 
|  |  | 
|  | if (iotlb->target_as != &address_space_memory) { | 
|  | error_report("Wrong target AS \"%s\", only system memory is allowed", | 
|  | iotlb->target_as->name ? iotlb->target_as->name : "none"); | 
|  | vfio_set_migration_error(-EINVAL); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if ((iotlb->perm & IOMMU_RW) != IOMMU_NONE) { | 
|  | bool read_only; | 
|  |  | 
|  | if (!vfio_get_xlat_addr(iotlb, &vaddr, NULL, &read_only, &local_err)) { | 
|  | error_report_err(local_err); | 
|  | goto out; | 
|  | } | 
|  | /* | 
|  | * vaddr is only valid until rcu_read_unlock(). But after | 
|  | * vfio_dma_map has set up the mapping the pages will be | 
|  | * pinned by the kernel. This makes sure that the RAM backend | 
|  | * of vaddr will always be there, even if the memory object is | 
|  | * destroyed and its backing memory munmap-ed. | 
|  | */ | 
|  | ret = vfio_container_dma_map(bcontainer, iova, | 
|  | iotlb->addr_mask + 1, vaddr, | 
|  | read_only); | 
|  | if (ret) { | 
|  | error_report("vfio_container_dma_map(%p, 0x%"HWADDR_PRIx", " | 
|  | "0x%"HWADDR_PRIx", %p) = %d (%s)", | 
|  | bcontainer, iova, | 
|  | iotlb->addr_mask + 1, vaddr, ret, strerror(-ret)); | 
|  | } | 
|  | } else { | 
|  | ret = vfio_container_dma_unmap(bcontainer, iova, | 
|  | iotlb->addr_mask + 1, iotlb); | 
|  | if (ret) { | 
|  | error_report("vfio_container_dma_unmap(%p, 0x%"HWADDR_PRIx", " | 
|  | "0x%"HWADDR_PRIx") = %d (%s)", | 
|  | bcontainer, iova, | 
|  | iotlb->addr_mask + 1, ret, strerror(-ret)); | 
|  | vfio_set_migration_error(ret); | 
|  | } | 
|  | } | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void vfio_ram_discard_notify_discard(RamDiscardListener *rdl, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | VFIORamDiscardListener *vrdl = container_of(rdl, VFIORamDiscardListener, | 
|  | listener); | 
|  | VFIOContainerBase *bcontainer = vrdl->bcontainer; | 
|  | const hwaddr size = int128_get64(section->size); | 
|  | const hwaddr iova = section->offset_within_address_space; | 
|  | int ret; | 
|  |  | 
|  | /* Unmap with a single call. */ | 
|  | ret = vfio_container_dma_unmap(bcontainer, iova, size , NULL); | 
|  | if (ret) { | 
|  | error_report("%s: vfio_container_dma_unmap() failed: %s", __func__, | 
|  | strerror(-ret)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int vfio_ram_discard_notify_populate(RamDiscardListener *rdl, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | VFIORamDiscardListener *vrdl = container_of(rdl, VFIORamDiscardListener, | 
|  | listener); | 
|  | VFIOContainerBase *bcontainer = vrdl->bcontainer; | 
|  | const hwaddr end = section->offset_within_region + | 
|  | int128_get64(section->size); | 
|  | hwaddr start, next, iova; | 
|  | void *vaddr; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Map in (aligned within memory region) minimum granularity, so we can | 
|  | * unmap in minimum granularity later. | 
|  | */ | 
|  | for (start = section->offset_within_region; start < end; start = next) { | 
|  | next = ROUND_UP(start + 1, vrdl->granularity); | 
|  | next = MIN(next, end); | 
|  |  | 
|  | iova = start - section->offset_within_region + | 
|  | section->offset_within_address_space; | 
|  | vaddr = memory_region_get_ram_ptr(section->mr) + start; | 
|  |  | 
|  | ret = vfio_container_dma_map(bcontainer, iova, next - start, | 
|  | vaddr, section->readonly); | 
|  | if (ret) { | 
|  | /* Rollback */ | 
|  | vfio_ram_discard_notify_discard(rdl, section); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void vfio_register_ram_discard_listener(VFIOContainerBase *bcontainer, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | RamDiscardManager *rdm = memory_region_get_ram_discard_manager(section->mr); | 
|  | VFIORamDiscardListener *vrdl; | 
|  |  | 
|  | /* Ignore some corner cases not relevant in practice. */ | 
|  | g_assert(QEMU_IS_ALIGNED(section->offset_within_region, TARGET_PAGE_SIZE)); | 
|  | g_assert(QEMU_IS_ALIGNED(section->offset_within_address_space, | 
|  | TARGET_PAGE_SIZE)); | 
|  | g_assert(QEMU_IS_ALIGNED(int128_get64(section->size), TARGET_PAGE_SIZE)); | 
|  |  | 
|  | vrdl = g_new0(VFIORamDiscardListener, 1); | 
|  | vrdl->bcontainer = bcontainer; | 
|  | vrdl->mr = section->mr; | 
|  | vrdl->offset_within_address_space = section->offset_within_address_space; | 
|  | vrdl->size = int128_get64(section->size); | 
|  | vrdl->granularity = ram_discard_manager_get_min_granularity(rdm, | 
|  | section->mr); | 
|  |  | 
|  | g_assert(vrdl->granularity && is_power_of_2(vrdl->granularity)); | 
|  | g_assert(bcontainer->pgsizes && | 
|  | vrdl->granularity >= 1ULL << ctz64(bcontainer->pgsizes)); | 
|  |  | 
|  | ram_discard_listener_init(&vrdl->listener, | 
|  | vfio_ram_discard_notify_populate, | 
|  | vfio_ram_discard_notify_discard, true); | 
|  | ram_discard_manager_register_listener(rdm, &vrdl->listener, section); | 
|  | QLIST_INSERT_HEAD(&bcontainer->vrdl_list, vrdl, next); | 
|  |  | 
|  | /* | 
|  | * Sanity-check if we have a theoretically problematic setup where we could | 
|  | * exceed the maximum number of possible DMA mappings over time. We assume | 
|  | * that each mapped section in the same address space as a RamDiscardManager | 
|  | * section consumes exactly one DMA mapping, with the exception of | 
|  | * RamDiscardManager sections; i.e., we don't expect to have gIOMMU sections | 
|  | * in the same address space as RamDiscardManager sections. | 
|  | * | 
|  | * We assume that each section in the address space consumes one memslot. | 
|  | * We take the number of KVM memory slots as a best guess for the maximum | 
|  | * number of sections in the address space we could have over time, | 
|  | * also consuming DMA mappings. | 
|  | */ | 
|  | if (bcontainer->dma_max_mappings) { | 
|  | unsigned int vrdl_count = 0, vrdl_mappings = 0, max_memslots = 512; | 
|  |  | 
|  | #ifdef CONFIG_KVM | 
|  | if (kvm_enabled()) { | 
|  | max_memslots = kvm_get_max_memslots(); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | QLIST_FOREACH(vrdl, &bcontainer->vrdl_list, next) { | 
|  | hwaddr start, end; | 
|  |  | 
|  | start = QEMU_ALIGN_DOWN(vrdl->offset_within_address_space, | 
|  | vrdl->granularity); | 
|  | end = ROUND_UP(vrdl->offset_within_address_space + vrdl->size, | 
|  | vrdl->granularity); | 
|  | vrdl_mappings += (end - start) / vrdl->granularity; | 
|  | vrdl_count++; | 
|  | } | 
|  |  | 
|  | if (vrdl_mappings + max_memslots - vrdl_count > | 
|  | bcontainer->dma_max_mappings) { | 
|  | warn_report("%s: possibly running out of DMA mappings. E.g., try" | 
|  | " increasing the 'block-size' of virtio-mem devies." | 
|  | " Maximum possible DMA mappings: %d, Maximum possible" | 
|  | " memslots: %d", __func__, bcontainer->dma_max_mappings, | 
|  | max_memslots); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vfio_unregister_ram_discard_listener(VFIOContainerBase *bcontainer, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | RamDiscardManager *rdm = memory_region_get_ram_discard_manager(section->mr); | 
|  | VFIORamDiscardListener *vrdl = NULL; | 
|  |  | 
|  | QLIST_FOREACH(vrdl, &bcontainer->vrdl_list, next) { | 
|  | if (vrdl->mr == section->mr && | 
|  | vrdl->offset_within_address_space == | 
|  | section->offset_within_address_space) { | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!vrdl) { | 
|  | hw_error("vfio: Trying to unregister missing RAM discard listener"); | 
|  | } | 
|  |  | 
|  | ram_discard_manager_unregister_listener(rdm, &vrdl->listener); | 
|  | QLIST_REMOVE(vrdl, next); | 
|  | g_free(vrdl); | 
|  | } | 
|  |  | 
|  | static bool vfio_known_safe_misalignment(MemoryRegionSection *section) | 
|  | { | 
|  | MemoryRegion *mr = section->mr; | 
|  |  | 
|  | if (!TPM_IS_CRB(mr->owner)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* this is a known safe misaligned region, just trace for debug purpose */ | 
|  | trace_vfio_known_safe_misalignment(memory_region_name(mr), | 
|  | section->offset_within_address_space, | 
|  | section->offset_within_region, | 
|  | qemu_real_host_page_size()); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool vfio_listener_valid_section(MemoryRegionSection *section, | 
|  | const char *name) | 
|  | { | 
|  | if (vfio_listener_skipped_section(section)) { | 
|  | trace_vfio_listener_region_skip(name, | 
|  | section->offset_within_address_space, | 
|  | section->offset_within_address_space + | 
|  | int128_get64(int128_sub(section->size, int128_one()))); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (unlikely((section->offset_within_address_space & | 
|  | ~qemu_real_host_page_mask()) != | 
|  | (section->offset_within_region & ~qemu_real_host_page_mask()))) { | 
|  | if (!vfio_known_safe_misalignment(section)) { | 
|  | error_report("%s received unaligned region %s iova=0x%"PRIx64 | 
|  | " offset_within_region=0x%"PRIx64 | 
|  | " qemu_real_host_page_size=0x%"PRIxPTR, | 
|  | __func__, memory_region_name(section->mr), | 
|  | section->offset_within_address_space, | 
|  | section->offset_within_region, | 
|  | qemu_real_host_page_size()); | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool vfio_get_section_iova_range(VFIOContainerBase *bcontainer, | 
|  | MemoryRegionSection *section, | 
|  | hwaddr *out_iova, hwaddr *out_end, | 
|  | Int128 *out_llend) | 
|  | { | 
|  | Int128 llend; | 
|  | hwaddr iova; | 
|  |  | 
|  | iova = REAL_HOST_PAGE_ALIGN(section->offset_within_address_space); | 
|  | llend = int128_make64(section->offset_within_address_space); | 
|  | llend = int128_add(llend, section->size); | 
|  | llend = int128_and(llend, int128_exts64(qemu_real_host_page_mask())); | 
|  |  | 
|  | if (int128_ge(int128_make64(iova), llend)) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | *out_iova = iova; | 
|  | *out_end = int128_get64(int128_sub(llend, int128_one())); | 
|  | if (out_llend) { | 
|  | *out_llend = llend; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void vfio_device_error_append(VFIODevice *vbasedev, Error **errp) | 
|  | { | 
|  | /* | 
|  | * MMIO region mapping failures are not fatal but in this case PCI | 
|  | * peer-to-peer transactions are broken. | 
|  | */ | 
|  | if (vbasedev && vbasedev->type == VFIO_DEVICE_TYPE_PCI) { | 
|  | error_append_hint(errp, "%s: PCI peer-to-peer transactions " | 
|  | "on BARs are not supported.\n", vbasedev->name); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vfio_listener_region_add(MemoryListener *listener, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | VFIOContainerBase *bcontainer = container_of(listener, VFIOContainerBase, | 
|  | listener); | 
|  | hwaddr iova, end; | 
|  | Int128 llend, llsize; | 
|  | void *vaddr; | 
|  | int ret; | 
|  | Error *err = NULL; | 
|  |  | 
|  | if (!vfio_listener_valid_section(section, "region_add")) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!vfio_get_section_iova_range(bcontainer, section, &iova, &end, | 
|  | &llend)) { | 
|  | if (memory_region_is_ram_device(section->mr)) { | 
|  | trace_vfio_listener_region_add_no_dma_map( | 
|  | memory_region_name(section->mr), | 
|  | section->offset_within_address_space, | 
|  | int128_getlo(section->size), | 
|  | qemu_real_host_page_size()); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* PPC64/pseries machine only */ | 
|  | if (!vfio_container_add_section_window(bcontainer, section, &err)) { | 
|  | goto mmio_dma_error; | 
|  | } | 
|  |  | 
|  | memory_region_ref(section->mr); | 
|  |  | 
|  | if (memory_region_is_iommu(section->mr)) { | 
|  | VFIOGuestIOMMU *giommu; | 
|  | IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr); | 
|  | int iommu_idx; | 
|  |  | 
|  | trace_vfio_listener_region_add_iommu(section->mr->name, iova, end); | 
|  | /* | 
|  | * FIXME: For VFIO iommu types which have KVM acceleration to | 
|  | * avoid bouncing all map/unmaps through qemu this way, this | 
|  | * would be the right place to wire that up (tell the KVM | 
|  | * device emulation the VFIO iommu handles to use). | 
|  | */ | 
|  | giommu = g_malloc0(sizeof(*giommu)); | 
|  | giommu->iommu_mr = iommu_mr; | 
|  | giommu->iommu_offset = section->offset_within_address_space - | 
|  | section->offset_within_region; | 
|  | giommu->bcontainer = bcontainer; | 
|  | llend = int128_add(int128_make64(section->offset_within_region), | 
|  | section->size); | 
|  | llend = int128_sub(llend, int128_one()); | 
|  | iommu_idx = memory_region_iommu_attrs_to_index(iommu_mr, | 
|  | MEMTXATTRS_UNSPECIFIED); | 
|  | iommu_notifier_init(&giommu->n, vfio_iommu_map_notify, | 
|  | IOMMU_NOTIFIER_IOTLB_EVENTS, | 
|  | section->offset_within_region, | 
|  | int128_get64(llend), | 
|  | iommu_idx); | 
|  |  | 
|  | ret = memory_region_register_iommu_notifier(section->mr, &giommu->n, | 
|  | &err); | 
|  | if (ret) { | 
|  | g_free(giommu); | 
|  | goto fail; | 
|  | } | 
|  | QLIST_INSERT_HEAD(&bcontainer->giommu_list, giommu, giommu_next); | 
|  | memory_region_iommu_replay(giommu->iommu_mr, &giommu->n); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Here we assume that memory_region_is_ram(section->mr)==true */ | 
|  |  | 
|  | /* | 
|  | * For RAM memory regions with a RamDiscardManager, we only want to map the | 
|  | * actually populated parts - and update the mapping whenever we're notified | 
|  | * about changes. | 
|  | */ | 
|  | if (memory_region_has_ram_discard_manager(section->mr)) { | 
|  | vfio_register_ram_discard_listener(bcontainer, section); | 
|  | return; | 
|  | } | 
|  |  | 
|  | vaddr = memory_region_get_ram_ptr(section->mr) + | 
|  | section->offset_within_region + | 
|  | (iova - section->offset_within_address_space); | 
|  |  | 
|  | trace_vfio_listener_region_add_ram(iova, end, vaddr); | 
|  |  | 
|  | llsize = int128_sub(llend, int128_make64(iova)); | 
|  |  | 
|  | if (memory_region_is_ram_device(section->mr)) { | 
|  | hwaddr pgmask = (1ULL << ctz64(bcontainer->pgsizes)) - 1; | 
|  |  | 
|  | if ((iova & pgmask) || (int128_get64(llsize) & pgmask)) { | 
|  | trace_vfio_listener_region_add_no_dma_map( | 
|  | memory_region_name(section->mr), | 
|  | section->offset_within_address_space, | 
|  | int128_getlo(section->size), | 
|  | pgmask + 1); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = vfio_container_dma_map(bcontainer, iova, int128_get64(llsize), | 
|  | vaddr, section->readonly); | 
|  | if (ret) { | 
|  | error_setg(&err, "vfio_container_dma_map(%p, 0x%"HWADDR_PRIx", " | 
|  | "0x%"HWADDR_PRIx", %p) = %d (%s)", | 
|  | bcontainer, iova, int128_get64(llsize), vaddr, ret, | 
|  | strerror(-ret)); | 
|  | mmio_dma_error: | 
|  | if (memory_region_is_ram_device(section->mr)) { | 
|  | /* Allow unexpected mappings not to be fatal for RAM devices */ | 
|  | VFIODevice *vbasedev = | 
|  | vfio_get_vfio_device(memory_region_owner(section->mr)); | 
|  | vfio_device_error_append(vbasedev, &err); | 
|  | warn_report_err_once(err); | 
|  | return; | 
|  | } | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | fail: | 
|  | if (!bcontainer->initialized) { | 
|  | /* | 
|  | * At machine init time or when the device is attached to the | 
|  | * VM, store the first error in the container so we can | 
|  | * gracefully fail the device realize routine. | 
|  | */ | 
|  | if (!bcontainer->error) { | 
|  | error_propagate_prepend(&bcontainer->error, err, | 
|  | "Region %s: ", | 
|  | memory_region_name(section->mr)); | 
|  | } else { | 
|  | error_free(err); | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * At runtime, there's not much we can do other than throw a | 
|  | * hardware error. | 
|  | */ | 
|  | error_report_err(err); | 
|  | hw_error("vfio: DMA mapping failed, unable to continue"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vfio_listener_region_del(MemoryListener *listener, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | VFIOContainerBase *bcontainer = container_of(listener, VFIOContainerBase, | 
|  | listener); | 
|  | hwaddr iova, end; | 
|  | Int128 llend, llsize; | 
|  | int ret; | 
|  | bool try_unmap = true; | 
|  |  | 
|  | if (!vfio_listener_valid_section(section, "region_del")) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (memory_region_is_iommu(section->mr)) { | 
|  | VFIOGuestIOMMU *giommu; | 
|  |  | 
|  | trace_vfio_listener_region_del_iommu(section->mr->name); | 
|  | QLIST_FOREACH(giommu, &bcontainer->giommu_list, giommu_next) { | 
|  | if (MEMORY_REGION(giommu->iommu_mr) == section->mr && | 
|  | giommu->n.start == section->offset_within_region) { | 
|  | memory_region_unregister_iommu_notifier(section->mr, | 
|  | &giommu->n); | 
|  | QLIST_REMOVE(giommu, giommu_next); | 
|  | g_free(giommu); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * FIXME: We assume the one big unmap below is adequate to | 
|  | * remove any individual page mappings in the IOMMU which | 
|  | * might have been copied into VFIO. This works for a page table | 
|  | * based IOMMU where a big unmap flattens a large range of IO-PTEs. | 
|  | * That may not be true for all IOMMU types. | 
|  | */ | 
|  | } | 
|  |  | 
|  | if (!vfio_get_section_iova_range(bcontainer, section, &iova, &end, | 
|  | &llend)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | llsize = int128_sub(llend, int128_make64(iova)); | 
|  |  | 
|  | trace_vfio_listener_region_del(iova, end); | 
|  |  | 
|  | if (memory_region_is_ram_device(section->mr)) { | 
|  | hwaddr pgmask; | 
|  |  | 
|  | pgmask = (1ULL << ctz64(bcontainer->pgsizes)) - 1; | 
|  | try_unmap = !((iova & pgmask) || (int128_get64(llsize) & pgmask)); | 
|  | } else if (memory_region_has_ram_discard_manager(section->mr)) { | 
|  | vfio_unregister_ram_discard_listener(bcontainer, section); | 
|  | /* Unregistering will trigger an unmap. */ | 
|  | try_unmap = false; | 
|  | } | 
|  |  | 
|  | if (try_unmap) { | 
|  | if (int128_eq(llsize, int128_2_64())) { | 
|  | /* The unmap ioctl doesn't accept a full 64-bit span. */ | 
|  | llsize = int128_rshift(llsize, 1); | 
|  | ret = vfio_container_dma_unmap(bcontainer, iova, | 
|  | int128_get64(llsize), NULL); | 
|  | if (ret) { | 
|  | error_report("vfio_container_dma_unmap(%p, 0x%"HWADDR_PRIx", " | 
|  | "0x%"HWADDR_PRIx") = %d (%s)", | 
|  | bcontainer, iova, int128_get64(llsize), ret, | 
|  | strerror(-ret)); | 
|  | } | 
|  | iova += int128_get64(llsize); | 
|  | } | 
|  | ret = vfio_container_dma_unmap(bcontainer, iova, | 
|  | int128_get64(llsize), NULL); | 
|  | if (ret) { | 
|  | error_report("vfio_container_dma_unmap(%p, 0x%"HWADDR_PRIx", " | 
|  | "0x%"HWADDR_PRIx") = %d (%s)", | 
|  | bcontainer, iova, int128_get64(llsize), ret, | 
|  | strerror(-ret)); | 
|  | } | 
|  | } | 
|  |  | 
|  | memory_region_unref(section->mr); | 
|  |  | 
|  | /* PPC64/pseries machine only */ | 
|  | vfio_container_del_section_window(bcontainer, section); | 
|  | } | 
|  |  | 
|  | typedef struct VFIODirtyRanges { | 
|  | hwaddr min32; | 
|  | hwaddr max32; | 
|  | hwaddr min64; | 
|  | hwaddr max64; | 
|  | hwaddr minpci64; | 
|  | hwaddr maxpci64; | 
|  | } VFIODirtyRanges; | 
|  |  | 
|  | typedef struct VFIODirtyRangesListener { | 
|  | VFIOContainerBase *bcontainer; | 
|  | VFIODirtyRanges ranges; | 
|  | MemoryListener listener; | 
|  | } VFIODirtyRangesListener; | 
|  |  | 
|  | static bool vfio_section_is_vfio_pci(MemoryRegionSection *section, | 
|  | VFIOContainerBase *bcontainer) | 
|  | { | 
|  | VFIOPCIDevice *pcidev; | 
|  | VFIODevice *vbasedev; | 
|  | Object *owner; | 
|  |  | 
|  | owner = memory_region_owner(section->mr); | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &bcontainer->device_list, container_next) { | 
|  | if (vbasedev->type != VFIO_DEVICE_TYPE_PCI) { | 
|  | continue; | 
|  | } | 
|  | pcidev = container_of(vbasedev, VFIOPCIDevice, vbasedev); | 
|  | if (OBJECT(pcidev) == owner) { | 
|  | return true; | 
|  | } | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void vfio_dirty_tracking_update_range(VFIODirtyRanges *range, | 
|  | hwaddr iova, hwaddr end, | 
|  | bool update_pci) | 
|  | { | 
|  | hwaddr *min, *max; | 
|  |  | 
|  | /* | 
|  | * The address space passed to the dirty tracker is reduced to three ranges: | 
|  | * one for 32-bit DMA ranges, one for 64-bit DMA ranges and one for the | 
|  | * PCI 64-bit hole. | 
|  | * | 
|  | * The underlying reports of dirty will query a sub-interval of each of | 
|  | * these ranges. | 
|  | * | 
|  | * The purpose of the three range handling is to handle known cases of big | 
|  | * holes in the address space, like the x86 AMD 1T hole, and firmware (like | 
|  | * OVMF) which may relocate the pci-hole64 to the end of the address space. | 
|  | * The latter would otherwise generate large ranges for tracking, stressing | 
|  | * the limits of supported hardware. The pci-hole32 will always be below 4G | 
|  | * (overlapping or not) so it doesn't need special handling and is part of | 
|  | * the 32-bit range. | 
|  | * | 
|  | * The alternative would be an IOVATree but that has a much bigger runtime | 
|  | * overhead and unnecessary complexity. | 
|  | */ | 
|  | if (update_pci && iova >= UINT32_MAX) { | 
|  | min = &range->minpci64; | 
|  | max = &range->maxpci64; | 
|  | } else { | 
|  | min = (end <= UINT32_MAX) ? &range->min32 : &range->min64; | 
|  | max = (end <= UINT32_MAX) ? &range->max32 : &range->max64; | 
|  | } | 
|  | if (*min > iova) { | 
|  | *min = iova; | 
|  | } | 
|  | if (*max < end) { | 
|  | *max = end; | 
|  | } | 
|  |  | 
|  | trace_vfio_device_dirty_tracking_update(iova, end, *min, *max); | 
|  | } | 
|  |  | 
|  | static void vfio_dirty_tracking_update(MemoryListener *listener, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | VFIODirtyRangesListener *dirty = | 
|  | container_of(listener, VFIODirtyRangesListener, listener); | 
|  | hwaddr iova, end; | 
|  |  | 
|  | if (!vfio_listener_valid_section(section, "tracking_update") || | 
|  | !vfio_get_section_iova_range(dirty->bcontainer, section, | 
|  | &iova, &end, NULL)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | vfio_dirty_tracking_update_range(&dirty->ranges, iova, end, | 
|  | vfio_section_is_vfio_pci(section, dirty->bcontainer)); | 
|  | } | 
|  |  | 
|  | static const MemoryListener vfio_dirty_tracking_listener = { | 
|  | .name = "vfio-tracking", | 
|  | .region_add = vfio_dirty_tracking_update, | 
|  | }; | 
|  |  | 
|  | static void vfio_dirty_tracking_init(VFIOContainerBase *bcontainer, | 
|  | VFIODirtyRanges *ranges) | 
|  | { | 
|  | VFIODirtyRangesListener dirty; | 
|  |  | 
|  | memset(&dirty, 0, sizeof(dirty)); | 
|  | dirty.ranges.min32 = UINT32_MAX; | 
|  | dirty.ranges.min64 = UINT64_MAX; | 
|  | dirty.ranges.minpci64 = UINT64_MAX; | 
|  | dirty.listener = vfio_dirty_tracking_listener; | 
|  | dirty.bcontainer = bcontainer; | 
|  |  | 
|  | memory_listener_register(&dirty.listener, | 
|  | bcontainer->space->as); | 
|  |  | 
|  | *ranges = dirty.ranges; | 
|  |  | 
|  | /* | 
|  | * The memory listener is synchronous, and used to calculate the range | 
|  | * to dirty tracking. Unregister it after we are done as we are not | 
|  | * interested in any follow-up updates. | 
|  | */ | 
|  | memory_listener_unregister(&dirty.listener); | 
|  | } | 
|  |  | 
|  | static void vfio_devices_dma_logging_stop(VFIOContainerBase *bcontainer) | 
|  | { | 
|  | uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature), | 
|  | sizeof(uint64_t))] = {}; | 
|  | struct vfio_device_feature *feature = (struct vfio_device_feature *)buf; | 
|  | VFIODevice *vbasedev; | 
|  |  | 
|  | feature->argsz = sizeof(buf); | 
|  | feature->flags = VFIO_DEVICE_FEATURE_SET | | 
|  | VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP; | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &bcontainer->device_list, container_next) { | 
|  | if (!vbasedev->dirty_tracking) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) { | 
|  | warn_report("%s: Failed to stop DMA logging, err %d (%s)", | 
|  | vbasedev->name, -errno, strerror(errno)); | 
|  | } | 
|  | vbasedev->dirty_tracking = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct vfio_device_feature * | 
|  | vfio_device_feature_dma_logging_start_create(VFIOContainerBase *bcontainer, | 
|  | VFIODirtyRanges *tracking) | 
|  | { | 
|  | struct vfio_device_feature *feature; | 
|  | size_t feature_size; | 
|  | struct vfio_device_feature_dma_logging_control *control; | 
|  | struct vfio_device_feature_dma_logging_range *ranges; | 
|  |  | 
|  | feature_size = sizeof(struct vfio_device_feature) + | 
|  | sizeof(struct vfio_device_feature_dma_logging_control); | 
|  | feature = g_try_malloc0(feature_size); | 
|  | if (!feature) { | 
|  | errno = ENOMEM; | 
|  | return NULL; | 
|  | } | 
|  | feature->argsz = feature_size; | 
|  | feature->flags = VFIO_DEVICE_FEATURE_SET | | 
|  | VFIO_DEVICE_FEATURE_DMA_LOGGING_START; | 
|  |  | 
|  | control = (struct vfio_device_feature_dma_logging_control *)feature->data; | 
|  | control->page_size = qemu_real_host_page_size(); | 
|  |  | 
|  | /* | 
|  | * DMA logging uAPI guarantees to support at least a number of ranges that | 
|  | * fits into a single host kernel base page. | 
|  | */ | 
|  | control->num_ranges = !!tracking->max32 + !!tracking->max64 + | 
|  | !!tracking->maxpci64; | 
|  | ranges = g_try_new0(struct vfio_device_feature_dma_logging_range, | 
|  | control->num_ranges); | 
|  | if (!ranges) { | 
|  | g_free(feature); | 
|  | errno = ENOMEM; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | control->ranges = (uintptr_t)ranges; | 
|  | if (tracking->max32) { | 
|  | ranges->iova = tracking->min32; | 
|  | ranges->length = (tracking->max32 - tracking->min32) + 1; | 
|  | ranges++; | 
|  | } | 
|  | if (tracking->max64) { | 
|  | ranges->iova = tracking->min64; | 
|  | ranges->length = (tracking->max64 - tracking->min64) + 1; | 
|  | ranges++; | 
|  | } | 
|  | if (tracking->maxpci64) { | 
|  | ranges->iova = tracking->minpci64; | 
|  | ranges->length = (tracking->maxpci64 - tracking->minpci64) + 1; | 
|  | } | 
|  |  | 
|  | trace_vfio_device_dirty_tracking_start(control->num_ranges, | 
|  | tracking->min32, tracking->max32, | 
|  | tracking->min64, tracking->max64, | 
|  | tracking->minpci64, tracking->maxpci64); | 
|  |  | 
|  | return feature; | 
|  | } | 
|  |  | 
|  | static void vfio_device_feature_dma_logging_start_destroy( | 
|  | struct vfio_device_feature *feature) | 
|  | { | 
|  | struct vfio_device_feature_dma_logging_control *control = | 
|  | (struct vfio_device_feature_dma_logging_control *)feature->data; | 
|  | struct vfio_device_feature_dma_logging_range *ranges = | 
|  | (struct vfio_device_feature_dma_logging_range *)(uintptr_t)control->ranges; | 
|  |  | 
|  | g_free(ranges); | 
|  | g_free(feature); | 
|  | } | 
|  |  | 
|  | static bool vfio_devices_dma_logging_start(VFIOContainerBase *bcontainer, | 
|  | Error **errp) | 
|  | { | 
|  | struct vfio_device_feature *feature; | 
|  | VFIODirtyRanges ranges; | 
|  | VFIODevice *vbasedev; | 
|  | int ret = 0; | 
|  |  | 
|  | vfio_dirty_tracking_init(bcontainer, &ranges); | 
|  | feature = vfio_device_feature_dma_logging_start_create(bcontainer, | 
|  | &ranges); | 
|  | if (!feature) { | 
|  | error_setg_errno(errp, errno, "Failed to prepare DMA logging"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &bcontainer->device_list, container_next) { | 
|  | if (vbasedev->dirty_tracking) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ret = ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature); | 
|  | if (ret) { | 
|  | ret = -errno; | 
|  | error_setg_errno(errp, errno, "%s: Failed to start DMA logging", | 
|  | vbasedev->name); | 
|  | goto out; | 
|  | } | 
|  | vbasedev->dirty_tracking = true; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (ret) { | 
|  | vfio_devices_dma_logging_stop(bcontainer); | 
|  | } | 
|  |  | 
|  | vfio_device_feature_dma_logging_start_destroy(feature); | 
|  |  | 
|  | return ret == 0; | 
|  | } | 
|  |  | 
|  | static bool vfio_listener_log_global_start(MemoryListener *listener, | 
|  | Error **errp) | 
|  | { | 
|  | ERRP_GUARD(); | 
|  | VFIOContainerBase *bcontainer = container_of(listener, VFIOContainerBase, | 
|  | listener); | 
|  | bool ret; | 
|  |  | 
|  | if (vfio_devices_all_device_dirty_tracking(bcontainer)) { | 
|  | ret = vfio_devices_dma_logging_start(bcontainer, errp); | 
|  | } else { | 
|  | ret = vfio_container_set_dirty_page_tracking(bcontainer, true, errp) == 0; | 
|  | } | 
|  |  | 
|  | if (!ret) { | 
|  | error_prepend(errp, "vfio: Could not start dirty page tracking - "); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vfio_listener_log_global_stop(MemoryListener *listener) | 
|  | { | 
|  | VFIOContainerBase *bcontainer = container_of(listener, VFIOContainerBase, | 
|  | listener); | 
|  | Error *local_err = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | if (vfio_devices_all_device_dirty_tracking(bcontainer)) { | 
|  | vfio_devices_dma_logging_stop(bcontainer); | 
|  | } else { | 
|  | ret = vfio_container_set_dirty_page_tracking(bcontainer, false, | 
|  | &local_err); | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | error_prepend(&local_err, | 
|  | "vfio: Could not stop dirty page tracking - "); | 
|  | error_report_err(local_err); | 
|  | vfio_set_migration_error(ret); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int vfio_device_dma_logging_report(VFIODevice *vbasedev, hwaddr iova, | 
|  | hwaddr size, void *bitmap) | 
|  | { | 
|  | uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature) + | 
|  | sizeof(struct vfio_device_feature_dma_logging_report), | 
|  | sizeof(uint64_t))] = {}; | 
|  | struct vfio_device_feature *feature = (struct vfio_device_feature *)buf; | 
|  | struct vfio_device_feature_dma_logging_report *report = | 
|  | (struct vfio_device_feature_dma_logging_report *)feature->data; | 
|  |  | 
|  | report->iova = iova; | 
|  | report->length = size; | 
|  | report->page_size = qemu_real_host_page_size(); | 
|  | report->bitmap = (uintptr_t)bitmap; | 
|  |  | 
|  | feature->argsz = sizeof(buf); | 
|  | feature->flags = VFIO_DEVICE_FEATURE_GET | | 
|  | VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT; | 
|  |  | 
|  | if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) { | 
|  | return -errno; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int vfio_devices_query_dirty_bitmap(const VFIOContainerBase *bcontainer, | 
|  | VFIOBitmap *vbmap, hwaddr iova, hwaddr size, Error **errp) | 
|  | { | 
|  | VFIODevice *vbasedev; | 
|  | int ret; | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &bcontainer->device_list, container_next) { | 
|  | ret = vfio_device_dma_logging_report(vbasedev, iova, size, | 
|  | vbmap->bitmap); | 
|  | if (ret) { | 
|  | error_setg_errno(errp, -ret, | 
|  | "%s: Failed to get DMA logging report, iova: " | 
|  | "0x%" HWADDR_PRIx ", size: 0x%" HWADDR_PRIx, | 
|  | vbasedev->name, iova, size); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int vfio_get_dirty_bitmap(const VFIOContainerBase *bcontainer, uint64_t iova, | 
|  | uint64_t size, ram_addr_t ram_addr, Error **errp) | 
|  | { | 
|  | bool all_device_dirty_tracking = | 
|  | vfio_devices_all_device_dirty_tracking(bcontainer); | 
|  | uint64_t dirty_pages; | 
|  | VFIOBitmap vbmap; | 
|  | int ret; | 
|  |  | 
|  | if (!bcontainer->dirty_pages_supported && !all_device_dirty_tracking) { | 
|  | cpu_physical_memory_set_dirty_range(ram_addr, size, | 
|  | tcg_enabled() ? DIRTY_CLIENTS_ALL : | 
|  | DIRTY_CLIENTS_NOCODE); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ret = vfio_bitmap_alloc(&vbmap, size); | 
|  | if (ret) { | 
|  | error_setg_errno(errp, -ret, | 
|  | "Failed to allocate dirty tracking bitmap"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (all_device_dirty_tracking) { | 
|  | ret = vfio_devices_query_dirty_bitmap(bcontainer, &vbmap, iova, size, | 
|  | errp); | 
|  | } else { | 
|  | ret = vfio_container_query_dirty_bitmap(bcontainer, &vbmap, iova, size, | 
|  | errp); | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | dirty_pages = cpu_physical_memory_set_dirty_lebitmap(vbmap.bitmap, ram_addr, | 
|  | vbmap.pages); | 
|  |  | 
|  | trace_vfio_get_dirty_bitmap(iova, size, vbmap.size, ram_addr, dirty_pages); | 
|  | out: | 
|  | g_free(vbmap.bitmap); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | typedef struct { | 
|  | IOMMUNotifier n; | 
|  | VFIOGuestIOMMU *giommu; | 
|  | } vfio_giommu_dirty_notifier; | 
|  |  | 
|  | static void vfio_iommu_map_dirty_notify(IOMMUNotifier *n, IOMMUTLBEntry *iotlb) | 
|  | { | 
|  | vfio_giommu_dirty_notifier *gdn = container_of(n, | 
|  | vfio_giommu_dirty_notifier, n); | 
|  | VFIOGuestIOMMU *giommu = gdn->giommu; | 
|  | VFIOContainerBase *bcontainer = giommu->bcontainer; | 
|  | hwaddr iova = iotlb->iova + giommu->iommu_offset; | 
|  | ram_addr_t translated_addr; | 
|  | Error *local_err = NULL; | 
|  | int ret = -EINVAL; | 
|  |  | 
|  | trace_vfio_iommu_map_dirty_notify(iova, iova + iotlb->addr_mask); | 
|  |  | 
|  | if (iotlb->target_as != &address_space_memory) { | 
|  | error_report("Wrong target AS \"%s\", only system memory is allowed", | 
|  | iotlb->target_as->name ? iotlb->target_as->name : "none"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (!vfio_get_xlat_addr(iotlb, NULL, &translated_addr, NULL, &local_err)) { | 
|  | error_report_err(local_err); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | ret = vfio_get_dirty_bitmap(bcontainer, iova, iotlb->addr_mask + 1, | 
|  | translated_addr, &local_err); | 
|  | if (ret) { | 
|  | error_prepend(&local_err, | 
|  | "vfio_iommu_map_dirty_notify(%p, 0x%"HWADDR_PRIx", " | 
|  | "0x%"HWADDR_PRIx") failed - ", bcontainer, iova, | 
|  | iotlb->addr_mask + 1); | 
|  | error_report_err(local_err); | 
|  | } | 
|  |  | 
|  | out_unlock: | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | out: | 
|  | if (ret) { | 
|  | vfio_set_migration_error(ret); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int vfio_ram_discard_get_dirty_bitmap(MemoryRegionSection *section, | 
|  | void *opaque) | 
|  | { | 
|  | const hwaddr size = int128_get64(section->size); | 
|  | const hwaddr iova = section->offset_within_address_space; | 
|  | const ram_addr_t ram_addr = memory_region_get_ram_addr(section->mr) + | 
|  | section->offset_within_region; | 
|  | VFIORamDiscardListener *vrdl = opaque; | 
|  | Error *local_err = NULL; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Sync the whole mapped region (spanning multiple individual mappings) | 
|  | * in one go. | 
|  | */ | 
|  | ret = vfio_get_dirty_bitmap(vrdl->bcontainer, iova, size, ram_addr, | 
|  | &local_err); | 
|  | if (ret) { | 
|  | error_report_err(local_err); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | vfio_sync_ram_discard_listener_dirty_bitmap(VFIOContainerBase *bcontainer, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | RamDiscardManager *rdm = memory_region_get_ram_discard_manager(section->mr); | 
|  | VFIORamDiscardListener *vrdl = NULL; | 
|  |  | 
|  | QLIST_FOREACH(vrdl, &bcontainer->vrdl_list, next) { | 
|  | if (vrdl->mr == section->mr && | 
|  | vrdl->offset_within_address_space == | 
|  | section->offset_within_address_space) { | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!vrdl) { | 
|  | hw_error("vfio: Trying to sync missing RAM discard listener"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We only want/can synchronize the bitmap for actually mapped parts - | 
|  | * which correspond to populated parts. Replay all populated parts. | 
|  | */ | 
|  | return ram_discard_manager_replay_populated(rdm, section, | 
|  | vfio_ram_discard_get_dirty_bitmap, | 
|  | &vrdl); | 
|  | } | 
|  |  | 
|  | static int vfio_sync_iommu_dirty_bitmap(VFIOContainerBase *bcontainer, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | VFIOGuestIOMMU *giommu; | 
|  | bool found = false; | 
|  | Int128 llend; | 
|  | vfio_giommu_dirty_notifier gdn; | 
|  | int idx; | 
|  |  | 
|  | QLIST_FOREACH(giommu, &bcontainer->giommu_list, giommu_next) { | 
|  | if (MEMORY_REGION(giommu->iommu_mr) == section->mr && | 
|  | giommu->n.start == section->offset_within_region) { | 
|  | found = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | gdn.giommu = giommu; | 
|  | idx = memory_region_iommu_attrs_to_index(giommu->iommu_mr, | 
|  | MEMTXATTRS_UNSPECIFIED); | 
|  |  | 
|  | llend = int128_add(int128_make64(section->offset_within_region), | 
|  | section->size); | 
|  | llend = int128_sub(llend, int128_one()); | 
|  |  | 
|  | iommu_notifier_init(&gdn.n, vfio_iommu_map_dirty_notify, IOMMU_NOTIFIER_MAP, | 
|  | section->offset_within_region, int128_get64(llend), | 
|  | idx); | 
|  | memory_region_iommu_replay(giommu->iommu_mr, &gdn.n); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vfio_sync_dirty_bitmap(VFIOContainerBase *bcontainer, | 
|  | MemoryRegionSection *section, Error **errp) | 
|  | { | 
|  | ram_addr_t ram_addr; | 
|  |  | 
|  | if (memory_region_is_iommu(section->mr)) { | 
|  | return vfio_sync_iommu_dirty_bitmap(bcontainer, section); | 
|  | } else if (memory_region_has_ram_discard_manager(section->mr)) { | 
|  | int ret; | 
|  |  | 
|  | ret = vfio_sync_ram_discard_listener_dirty_bitmap(bcontainer, section); | 
|  | if (ret) { | 
|  | error_setg(errp, | 
|  | "Failed to sync dirty bitmap with RAM discard listener"); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ram_addr = memory_region_get_ram_addr(section->mr) + | 
|  | section->offset_within_region; | 
|  |  | 
|  | return vfio_get_dirty_bitmap(bcontainer, | 
|  | REAL_HOST_PAGE_ALIGN(section->offset_within_address_space), | 
|  | int128_get64(section->size), ram_addr, errp); | 
|  | } | 
|  |  | 
|  | static void vfio_listener_log_sync(MemoryListener *listener, | 
|  | MemoryRegionSection *section) | 
|  | { | 
|  | VFIOContainerBase *bcontainer = container_of(listener, VFIOContainerBase, | 
|  | listener); | 
|  | int ret; | 
|  | Error *local_err = NULL; | 
|  |  | 
|  | if (vfio_listener_skipped_section(section)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (vfio_log_sync_needed(bcontainer)) { | 
|  | ret = vfio_sync_dirty_bitmap(bcontainer, section, &local_err); | 
|  | if (ret) { | 
|  | error_report_err(local_err); | 
|  | vfio_set_migration_error(ret); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | const MemoryListener vfio_memory_listener = { | 
|  | .name = "vfio", | 
|  | .region_add = vfio_listener_region_add, | 
|  | .region_del = vfio_listener_region_del, | 
|  | .log_global_start = vfio_listener_log_global_start, | 
|  | .log_global_stop = vfio_listener_log_global_stop, | 
|  | .log_sync = vfio_listener_log_sync, | 
|  | }; | 
|  |  | 
|  | void vfio_reset_handler(void *opaque) | 
|  | { | 
|  | VFIODevice *vbasedev; | 
|  |  | 
|  | trace_vfio_reset_handler(); | 
|  | QLIST_FOREACH(vbasedev, &vfio_device_list, global_next) { | 
|  | if (vbasedev->dev->realized) { | 
|  | vbasedev->ops->vfio_compute_needs_reset(vbasedev); | 
|  | } | 
|  | } | 
|  |  | 
|  | QLIST_FOREACH(vbasedev, &vfio_device_list, global_next) { | 
|  | if (vbasedev->dev->realized && vbasedev->needs_reset) { | 
|  | vbasedev->ops->vfio_hot_reset_multi(vbasedev); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | int vfio_kvm_device_add_fd(int fd, Error **errp) | 
|  | { | 
|  | #ifdef CONFIG_KVM | 
|  | struct kvm_device_attr attr = { | 
|  | .group = KVM_DEV_VFIO_FILE, | 
|  | .attr = KVM_DEV_VFIO_FILE_ADD, | 
|  | .addr = (uint64_t)(unsigned long)&fd, | 
|  | }; | 
|  |  | 
|  | if (!kvm_enabled()) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (vfio_kvm_device_fd < 0) { | 
|  | struct kvm_create_device cd = { | 
|  | .type = KVM_DEV_TYPE_VFIO, | 
|  | }; | 
|  |  | 
|  | if (kvm_vm_ioctl(kvm_state, KVM_CREATE_DEVICE, &cd)) { | 
|  | error_setg_errno(errp, errno, "Failed to create KVM VFIO device"); | 
|  | return -errno; | 
|  | } | 
|  |  | 
|  | vfio_kvm_device_fd = cd.fd; | 
|  | } | 
|  |  | 
|  | if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) { | 
|  | error_setg_errno(errp, errno, "Failed to add fd %d to KVM VFIO device", | 
|  | fd); | 
|  | return -errno; | 
|  | } | 
|  | #endif | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int vfio_kvm_device_del_fd(int fd, Error **errp) | 
|  | { | 
|  | #ifdef CONFIG_KVM | 
|  | struct kvm_device_attr attr = { | 
|  | .group = KVM_DEV_VFIO_FILE, | 
|  | .attr = KVM_DEV_VFIO_FILE_DEL, | 
|  | .addr = (uint64_t)(unsigned long)&fd, | 
|  | }; | 
|  |  | 
|  | if (vfio_kvm_device_fd < 0) { | 
|  | error_setg(errp, "KVM VFIO device isn't created yet"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (ioctl(vfio_kvm_device_fd, KVM_SET_DEVICE_ATTR, &attr)) { | 
|  | error_setg_errno(errp, errno, | 
|  | "Failed to remove fd %d from KVM VFIO device", fd); | 
|  | return -errno; | 
|  | } | 
|  | #endif | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | VFIOAddressSpace *vfio_get_address_space(AddressSpace *as) | 
|  | { | 
|  | VFIOAddressSpace *space; | 
|  |  | 
|  | QLIST_FOREACH(space, &vfio_address_spaces, list) { | 
|  | if (space->as == as) { | 
|  | return space; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* No suitable VFIOAddressSpace, create a new one */ | 
|  | space = g_malloc0(sizeof(*space)); | 
|  | space->as = as; | 
|  | QLIST_INIT(&space->containers); | 
|  |  | 
|  | if (QLIST_EMPTY(&vfio_address_spaces)) { | 
|  | qemu_register_reset(vfio_reset_handler, NULL); | 
|  | } | 
|  |  | 
|  | QLIST_INSERT_HEAD(&vfio_address_spaces, space, list); | 
|  |  | 
|  | return space; | 
|  | } | 
|  |  | 
|  | void vfio_put_address_space(VFIOAddressSpace *space) | 
|  | { | 
|  | if (!QLIST_EMPTY(&space->containers)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | QLIST_REMOVE(space, list); | 
|  | g_free(space); | 
|  |  | 
|  | if (QLIST_EMPTY(&vfio_address_spaces)) { | 
|  | qemu_unregister_reset(vfio_reset_handler, NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | void vfio_address_space_insert(VFIOAddressSpace *space, | 
|  | VFIOContainerBase *bcontainer) | 
|  | { | 
|  | QLIST_INSERT_HEAD(&space->containers, bcontainer, next); | 
|  | bcontainer->space = space; | 
|  | } | 
|  |  | 
|  | struct vfio_device_info *vfio_get_device_info(int fd) | 
|  | { | 
|  | struct vfio_device_info *info; | 
|  | uint32_t argsz = sizeof(*info); | 
|  |  | 
|  | info = g_malloc0(argsz); | 
|  |  | 
|  | retry: | 
|  | info->argsz = argsz; | 
|  |  | 
|  | if (ioctl(fd, VFIO_DEVICE_GET_INFO, info)) { | 
|  | g_free(info); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (info->argsz > argsz) { | 
|  | argsz = info->argsz; | 
|  | info = g_realloc(info, argsz); | 
|  | goto retry; | 
|  | } | 
|  |  | 
|  | return info; | 
|  | } | 
|  |  | 
|  | bool vfio_attach_device(char *name, VFIODevice *vbasedev, | 
|  | AddressSpace *as, Error **errp) | 
|  | { | 
|  | const VFIOIOMMUClass *ops = | 
|  | VFIO_IOMMU_CLASS(object_class_by_name(TYPE_VFIO_IOMMU_LEGACY)); | 
|  | HostIOMMUDevice *hiod = NULL; | 
|  |  | 
|  | if (vbasedev->iommufd) { | 
|  | ops = VFIO_IOMMU_CLASS(object_class_by_name(TYPE_VFIO_IOMMU_IOMMUFD)); | 
|  | } | 
|  |  | 
|  | assert(ops); | 
|  |  | 
|  |  | 
|  | if (!vbasedev->mdev) { | 
|  | hiod = HOST_IOMMU_DEVICE(object_new(ops->hiod_typename)); | 
|  | vbasedev->hiod = hiod; | 
|  | } | 
|  |  | 
|  | if (!ops->attach_device(name, vbasedev, as, errp)) { | 
|  | object_unref(hiod); | 
|  | vbasedev->hiod = NULL; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | void vfio_detach_device(VFIODevice *vbasedev) | 
|  | { | 
|  | if (!vbasedev->bcontainer) { | 
|  | return; | 
|  | } | 
|  | object_unref(vbasedev->hiod); | 
|  | VFIO_IOMMU_GET_CLASS(vbasedev->bcontainer)->detach_device(vbasedev); | 
|  | } |