| # -*- Mode: Python -*- |
| # |
| |
| ## |
| # @RTC_CHANGE: |
| # |
| # Emitted when the guest changes the RTC time. |
| # |
| # @offset: offset between base RTC clock (as specified by -rtc base), and |
| # new RTC clock value |
| # |
| # Note: This event is rate-limited. |
| # |
| # Since: 0.13.0 |
| # |
| # Example: |
| # |
| # <- { "event": "RTC_CHANGE", |
| # "data": { "offset": 78 }, |
| # "timestamp": { "seconds": 1267020223, "microseconds": 435656 } } |
| # |
| ## |
| { 'event': 'RTC_CHANGE', |
| 'data': { 'offset': 'int' }, |
| 'if': 'defined(TARGET_ALPHA) || defined(TARGET_ARM) || defined(TARGET_HPPA) || defined(TARGET_I386) || defined(TARGET_MIPS) || defined(TARGET_MIPS64) || defined(TARGET_MOXIE) || defined(TARGET_PPC) || defined(TARGET_PPC64) || defined(TARGET_S390X) || defined(TARGET_SH4) || defined(TARGET_SPARC)' } |
| |
| ## |
| # @rtc-reset-reinjection: |
| # |
| # This command will reset the RTC interrupt reinjection backlog. |
| # Can be used if another mechanism to synchronize guest time |
| # is in effect, for example QEMU guest agent's guest-set-time |
| # command. |
| # |
| # Since: 2.1 |
| # |
| # Example: |
| # |
| # -> { "execute": "rtc-reset-reinjection" } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'rtc-reset-reinjection', |
| 'if': 'defined(TARGET_I386)' } |
| |
| |
| ## |
| # @SevState: |
| # |
| # An enumeration of SEV state information used during @query-sev. |
| # |
| # @uninit: The guest is uninitialized. |
| # |
| # @launch-update: The guest is currently being launched; plaintext data and |
| # register state is being imported. |
| # |
| # @launch-secret: The guest is currently being launched; ciphertext data |
| # is being imported. |
| # |
| # @running: The guest is fully launched or migrated in. |
| # |
| # @send-update: The guest is currently being migrated out to another machine. |
| # |
| # @receive-update: The guest is currently being migrated from another machine. |
| # |
| # Since: 2.12 |
| ## |
| { 'enum': 'SevState', |
| 'data': ['uninit', 'launch-update', 'launch-secret', 'running', |
| 'send-update', 'receive-update' ], |
| 'if': 'defined(TARGET_I386)' } |
| |
| ## |
| # @SevInfo: |
| # |
| # Information about Secure Encrypted Virtualization (SEV) support |
| # |
| # @enabled: true if SEV is active |
| # |
| # @api-major: SEV API major version |
| # |
| # @api-minor: SEV API minor version |
| # |
| # @build-id: SEV FW build id |
| # |
| # @policy: SEV policy value |
| # |
| # @state: SEV guest state |
| # |
| # @handle: SEV firmware handle |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'SevInfo', |
| 'data': { 'enabled': 'bool', |
| 'api-major': 'uint8', |
| 'api-minor' : 'uint8', |
| 'build-id' : 'uint8', |
| 'policy' : 'uint32', |
| 'state' : 'SevState', |
| 'handle' : 'uint32' |
| }, |
| 'if': 'defined(TARGET_I386)' |
| } |
| |
| ## |
| # @query-sev: |
| # |
| # Returns information about SEV |
| # |
| # Returns: @SevInfo |
| # |
| # Since: 2.12 |
| # |
| # Example: |
| # |
| # -> { "execute": "query-sev" } |
| # <- { "return": { "enabled": true, "api-major" : 0, "api-minor" : 0, |
| # "build-id" : 0, "policy" : 0, "state" : "running", |
| # "handle" : 1 } } |
| # |
| ## |
| { 'command': 'query-sev', 'returns': 'SevInfo', |
| 'if': 'defined(TARGET_I386)' } |
| |
| |
| ## |
| # @SevLaunchMeasureInfo: |
| # |
| # SEV Guest Launch measurement information |
| # |
| # @data: the measurement value encoded in base64 |
| # |
| # Since: 2.12 |
| # |
| ## |
| { 'struct': 'SevLaunchMeasureInfo', 'data': {'data': 'str'}, |
| 'if': 'defined(TARGET_I386)' } |
| |
| ## |
| # @query-sev-launch-measure: |
| # |
| # Query the SEV guest launch information. |
| # |
| # Returns: The @SevLaunchMeasureInfo for the guest |
| # |
| # Since: 2.12 |
| # |
| # Example: |
| # |
| # -> { "execute": "query-sev-launch-measure" } |
| # <- { "return": { "data": "4l8LXeNlSPUDlXPJG5966/8%YZ" } } |
| # |
| ## |
| { 'command': 'query-sev-launch-measure', 'returns': 'SevLaunchMeasureInfo', |
| 'if': 'defined(TARGET_I386)' } |
| |
| |
| ## |
| # @SevCapability: |
| # |
| # The struct describes capability for a Secure Encrypted Virtualization |
| # feature. |
| # |
| # @pdh: Platform Diffie-Hellman key (base64 encoded) |
| # |
| # @cert-chain: PDH certificate chain (base64 encoded) |
| # |
| # @cbitpos: C-bit location in page table entry |
| # |
| # @reduced-phys-bits: Number of physical Address bit reduction when SEV is |
| # enabled |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'SevCapability', |
| 'data': { 'pdh': 'str', |
| 'cert-chain': 'str', |
| 'cbitpos': 'int', |
| 'reduced-phys-bits': 'int'}, |
| 'if': 'defined(TARGET_I386)' } |
| |
| ## |
| # @query-sev-capabilities: |
| # |
| # This command is used to get the SEV capabilities, and is supported on AMD |
| # X86 platforms only. |
| # |
| # Returns: SevCapability objects. |
| # |
| # Since: 2.12 |
| # |
| # Example: |
| # |
| # -> { "execute": "query-sev-capabilities" } |
| # <- { "return": { "pdh": "8CCDD8DDD", "cert-chain": "888CCCDDDEE", |
| # "cbitpos": 47, "reduced-phys-bits": 5}} |
| # |
| ## |
| { 'command': 'query-sev-capabilities', 'returns': 'SevCapability', |
| 'if': 'defined(TARGET_I386)' } |
| |
| ## |
| # @dump-skeys: |
| # |
| # Dump guest's storage keys |
| # |
| # @filename: the path to the file to dump to |
| # |
| # This command is only supported on s390 architecture. |
| # |
| # Since: 2.5 |
| # |
| # Example: |
| # |
| # -> { "execute": "dump-skeys", |
| # "arguments": { "filename": "/tmp/skeys" } } |
| # <- { "return": {} } |
| # |
| ## |
| { 'command': 'dump-skeys', |
| 'data': { 'filename': 'str' }, |
| 'if': 'defined(TARGET_S390X)' } |
| |
| ## |
| # @GICCapability: |
| # |
| # The struct describes capability for a specific GIC (Generic |
| # Interrupt Controller) version. These bits are not only decided by |
| # QEMU/KVM software version, but also decided by the hardware that |
| # the program is running upon. |
| # |
| # @version: version of GIC to be described. Currently, only 2 and 3 |
| # are supported. |
| # |
| # @emulated: whether current QEMU/hardware supports emulated GIC |
| # device in user space. |
| # |
| # @kernel: whether current QEMU/hardware supports hardware |
| # accelerated GIC device in kernel. |
| # |
| # Since: 2.6 |
| ## |
| { 'struct': 'GICCapability', |
| 'data': { 'version': 'int', |
| 'emulated': 'bool', |
| 'kernel': 'bool' }, |
| 'if': 'defined(TARGET_ARM)' } |
| |
| ## |
| # @query-gic-capabilities: |
| # |
| # This command is ARM-only. It will return a list of GICCapability |
| # objects that describe its capability bits. |
| # |
| # Returns: a list of GICCapability objects. |
| # |
| # Since: 2.6 |
| # |
| # Example: |
| # |
| # -> { "execute": "query-gic-capabilities" } |
| # <- { "return": [{ "version": 2, "emulated": true, "kernel": false }, |
| # { "version": 3, "emulated": false, "kernel": true } ] } |
| # |
| ## |
| { 'command': 'query-gic-capabilities', 'returns': ['GICCapability'], |
| 'if': 'defined(TARGET_ARM)' } |