| /* |
| * Block dirty bitmap postcopy migration |
| * |
| * Copyright IBM, Corp. 2009 |
| * Copyright (c) 2016-2017 Virtuozzo International GmbH. All rights reserved. |
| * |
| * Authors: |
| * Liran Schour <lirans@il.ibm.com> |
| * Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| * This file is derived from migration/block.c, so it's author and IBM copyright |
| * are here, although content is quite different. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| * |
| * *** |
| * |
| * Here postcopy migration of dirty bitmaps is realized. Only QMP-addressable |
| * bitmaps are migrated. |
| * |
| * Bitmap migration implies creating bitmap with the same name and granularity |
| * in destination QEMU. If the bitmap with the same name (for the same node) |
| * already exists on destination an error will be generated. |
| * |
| * format of migration: |
| * |
| * # Header (shared for different chunk types) |
| * 1, 2 or 4 bytes: flags (see qemu_{put,put}_flags) |
| * [ 1 byte: node name size ] \ flags & DEVICE_NAME |
| * [ n bytes: node name ] / |
| * [ 1 byte: bitmap name size ] \ flags & BITMAP_NAME |
| * [ n bytes: bitmap name ] / |
| * |
| * # Start of bitmap migration (flags & START) |
| * header |
| * be64: granularity |
| * 1 byte: bitmap flags (corresponds to BdrvDirtyBitmap) |
| * bit 0 - bitmap is enabled |
| * bit 1 - bitmap is persistent |
| * bit 2 - bitmap is autoloading |
| * bits 3-7 - reserved, must be zero |
| * |
| * # Complete of bitmap migration (flags & COMPLETE) |
| * header |
| * |
| * # Data chunk of bitmap migration |
| * header |
| * be64: start sector |
| * be32: number of sectors |
| * [ be64: buffer size ] \ ! (flags & ZEROES) |
| * [ n bytes: buffer ] / |
| * |
| * The last chunk in stream should contain flags & EOS. The chunk may skip |
| * device and/or bitmap names, assuming them to be the same with the previous |
| * chunk. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "block/block.h" |
| #include "block/block_int.h" |
| #include "sysemu/block-backend.h" |
| #include "sysemu/runstate.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/error-report.h" |
| #include "migration/misc.h" |
| #include "migration/migration.h" |
| #include "qemu-file.h" |
| #include "migration/vmstate.h" |
| #include "migration/register.h" |
| #include "qemu/hbitmap.h" |
| #include "qemu/cutils.h" |
| #include "qapi/error.h" |
| #include "trace.h" |
| |
| #define CHUNK_SIZE (1 << 10) |
| |
| /* Flags occupy one, two or four bytes (Big Endian). The size is determined as |
| * follows: |
| * in first (most significant) byte bit 8 is clear --> one byte |
| * in first byte bit 8 is set --> two or four bytes, depending on second |
| * byte: |
| * | in second byte bit 8 is clear --> two bytes |
| * | in second byte bit 8 is set --> four bytes |
| */ |
| #define DIRTY_BITMAP_MIG_FLAG_EOS 0x01 |
| #define DIRTY_BITMAP_MIG_FLAG_ZEROES 0x02 |
| #define DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME 0x04 |
| #define DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME 0x08 |
| #define DIRTY_BITMAP_MIG_FLAG_START 0x10 |
| #define DIRTY_BITMAP_MIG_FLAG_COMPLETE 0x20 |
| #define DIRTY_BITMAP_MIG_FLAG_BITS 0x40 |
| |
| #define DIRTY_BITMAP_MIG_EXTRA_FLAGS 0x80 |
| |
| #define DIRTY_BITMAP_MIG_START_FLAG_ENABLED 0x01 |
| #define DIRTY_BITMAP_MIG_START_FLAG_PERSISTENT 0x02 |
| /* 0x04 was "AUTOLOAD" flags on elder versions, no it is ignored */ |
| #define DIRTY_BITMAP_MIG_START_FLAG_RESERVED_MASK 0xf8 |
| |
| typedef struct DirtyBitmapMigBitmapState { |
| /* Written during setup phase. */ |
| BlockDriverState *bs; |
| const char *node_name; |
| BdrvDirtyBitmap *bitmap; |
| uint64_t total_sectors; |
| uint64_t sectors_per_chunk; |
| QSIMPLEQ_ENTRY(DirtyBitmapMigBitmapState) entry; |
| uint8_t flags; |
| |
| /* For bulk phase. */ |
| bool bulk_completed; |
| uint64_t cur_sector; |
| } DirtyBitmapMigBitmapState; |
| |
| typedef struct DirtyBitmapMigState { |
| QSIMPLEQ_HEAD(, DirtyBitmapMigBitmapState) dbms_list; |
| |
| bool bulk_completed; |
| bool no_bitmaps; |
| |
| /* for send_bitmap_bits() */ |
| BlockDriverState *prev_bs; |
| BdrvDirtyBitmap *prev_bitmap; |
| } DirtyBitmapMigState; |
| |
| typedef struct DirtyBitmapLoadState { |
| uint32_t flags; |
| char node_name[256]; |
| char bitmap_name[256]; |
| BlockDriverState *bs; |
| BdrvDirtyBitmap *bitmap; |
| } DirtyBitmapLoadState; |
| |
| static DirtyBitmapMigState dirty_bitmap_mig_state; |
| |
| typedef struct DirtyBitmapLoadBitmapState { |
| BlockDriverState *bs; |
| BdrvDirtyBitmap *bitmap; |
| bool migrated; |
| } DirtyBitmapLoadBitmapState; |
| static GSList *enabled_bitmaps; |
| QemuMutex finish_lock; |
| |
| void init_dirty_bitmap_incoming_migration(void) |
| { |
| qemu_mutex_init(&finish_lock); |
| } |
| |
| static uint32_t qemu_get_bitmap_flags(QEMUFile *f) |
| { |
| uint8_t flags = qemu_get_byte(f); |
| if (flags & DIRTY_BITMAP_MIG_EXTRA_FLAGS) { |
| flags = flags << 8 | qemu_get_byte(f); |
| if (flags & DIRTY_BITMAP_MIG_EXTRA_FLAGS) { |
| flags = flags << 16 | qemu_get_be16(f); |
| } |
| } |
| |
| return flags; |
| } |
| |
| static void qemu_put_bitmap_flags(QEMUFile *f, uint32_t flags) |
| { |
| /* The code currently do not send flags more than one byte */ |
| assert(!(flags & (0xffffff00 | DIRTY_BITMAP_MIG_EXTRA_FLAGS))); |
| |
| qemu_put_byte(f, flags); |
| } |
| |
| static void send_bitmap_header(QEMUFile *f, DirtyBitmapMigBitmapState *dbms, |
| uint32_t additional_flags) |
| { |
| BlockDriverState *bs = dbms->bs; |
| BdrvDirtyBitmap *bitmap = dbms->bitmap; |
| uint32_t flags = additional_flags; |
| trace_send_bitmap_header_enter(); |
| |
| if (bs != dirty_bitmap_mig_state.prev_bs) { |
| dirty_bitmap_mig_state.prev_bs = bs; |
| flags |= DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME; |
| } |
| |
| if (bitmap != dirty_bitmap_mig_state.prev_bitmap) { |
| dirty_bitmap_mig_state.prev_bitmap = bitmap; |
| flags |= DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME; |
| } |
| |
| qemu_put_bitmap_flags(f, flags); |
| |
| if (flags & DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME) { |
| qemu_put_counted_string(f, dbms->node_name); |
| } |
| |
| if (flags & DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME) { |
| qemu_put_counted_string(f, bdrv_dirty_bitmap_name(bitmap)); |
| } |
| } |
| |
| static void send_bitmap_start(QEMUFile *f, DirtyBitmapMigBitmapState *dbms) |
| { |
| send_bitmap_header(f, dbms, DIRTY_BITMAP_MIG_FLAG_START); |
| qemu_put_be32(f, bdrv_dirty_bitmap_granularity(dbms->bitmap)); |
| qemu_put_byte(f, dbms->flags); |
| } |
| |
| static void send_bitmap_complete(QEMUFile *f, DirtyBitmapMigBitmapState *dbms) |
| { |
| send_bitmap_header(f, dbms, DIRTY_BITMAP_MIG_FLAG_COMPLETE); |
| } |
| |
| static void send_bitmap_bits(QEMUFile *f, DirtyBitmapMigBitmapState *dbms, |
| uint64_t start_sector, uint32_t nr_sectors) |
| { |
| /* align for buffer_is_zero() */ |
| uint64_t align = 4 * sizeof(long); |
| uint64_t unaligned_size = |
| bdrv_dirty_bitmap_serialization_size( |
| dbms->bitmap, start_sector << BDRV_SECTOR_BITS, |
| (uint64_t)nr_sectors << BDRV_SECTOR_BITS); |
| uint64_t buf_size = QEMU_ALIGN_UP(unaligned_size, align); |
| uint8_t *buf = g_malloc0(buf_size); |
| uint32_t flags = DIRTY_BITMAP_MIG_FLAG_BITS; |
| |
| bdrv_dirty_bitmap_serialize_part( |
| dbms->bitmap, buf, start_sector << BDRV_SECTOR_BITS, |
| (uint64_t)nr_sectors << BDRV_SECTOR_BITS); |
| |
| if (buffer_is_zero(buf, buf_size)) { |
| g_free(buf); |
| buf = NULL; |
| flags |= DIRTY_BITMAP_MIG_FLAG_ZEROES; |
| } |
| |
| trace_send_bitmap_bits(flags, start_sector, nr_sectors, buf_size); |
| |
| send_bitmap_header(f, dbms, flags); |
| |
| qemu_put_be64(f, start_sector); |
| qemu_put_be32(f, nr_sectors); |
| |
| /* if a block is zero we need to flush here since the network |
| * bandwidth is now a lot higher than the storage device bandwidth. |
| * thus if we queue zero blocks we slow down the migration. */ |
| if (flags & DIRTY_BITMAP_MIG_FLAG_ZEROES) { |
| qemu_fflush(f); |
| } else { |
| qemu_put_be64(f, buf_size); |
| qemu_put_buffer(f, buf, buf_size); |
| } |
| |
| g_free(buf); |
| } |
| |
| /* Called with iothread lock taken. */ |
| static void dirty_bitmap_mig_cleanup(void) |
| { |
| DirtyBitmapMigBitmapState *dbms; |
| |
| while ((dbms = QSIMPLEQ_FIRST(&dirty_bitmap_mig_state.dbms_list)) != NULL) { |
| QSIMPLEQ_REMOVE_HEAD(&dirty_bitmap_mig_state.dbms_list, entry); |
| bdrv_dirty_bitmap_set_busy(dbms->bitmap, false); |
| bdrv_unref(dbms->bs); |
| g_free(dbms); |
| } |
| } |
| |
| /* Called with iothread lock taken. */ |
| static int init_dirty_bitmap_migration(void) |
| { |
| BlockDriverState *bs; |
| BdrvDirtyBitmap *bitmap; |
| DirtyBitmapMigBitmapState *dbms; |
| Error *local_err = NULL; |
| |
| dirty_bitmap_mig_state.bulk_completed = false; |
| dirty_bitmap_mig_state.prev_bs = NULL; |
| dirty_bitmap_mig_state.prev_bitmap = NULL; |
| dirty_bitmap_mig_state.no_bitmaps = false; |
| |
| for (bs = bdrv_next_all_states(NULL); bs; bs = bdrv_next_all_states(bs)) { |
| const char *name = bdrv_get_device_or_node_name(bs); |
| |
| for (bitmap = bdrv_dirty_bitmap_next(bs, NULL); bitmap; |
| bitmap = bdrv_dirty_bitmap_next(bs, bitmap)) |
| { |
| if (!bdrv_dirty_bitmap_name(bitmap)) { |
| continue; |
| } |
| |
| if (!name || strcmp(name, "") == 0) { |
| error_report("Found bitmap '%s' in unnamed node %p. It can't " |
| "be migrated", bdrv_dirty_bitmap_name(bitmap), bs); |
| goto fail; |
| } |
| |
| if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_DEFAULT, |
| &local_err)) { |
| error_report_err(local_err); |
| goto fail; |
| } |
| |
| bdrv_ref(bs); |
| bdrv_dirty_bitmap_set_busy(bitmap, true); |
| |
| dbms = g_new0(DirtyBitmapMigBitmapState, 1); |
| dbms->bs = bs; |
| dbms->node_name = name; |
| dbms->bitmap = bitmap; |
| dbms->total_sectors = bdrv_nb_sectors(bs); |
| dbms->sectors_per_chunk = CHUNK_SIZE * 8 * |
| bdrv_dirty_bitmap_granularity(bitmap) >> BDRV_SECTOR_BITS; |
| if (bdrv_dirty_bitmap_enabled(bitmap)) { |
| dbms->flags |= DIRTY_BITMAP_MIG_START_FLAG_ENABLED; |
| } |
| if (bdrv_dirty_bitmap_get_persistence(bitmap)) { |
| dbms->flags |= DIRTY_BITMAP_MIG_START_FLAG_PERSISTENT; |
| } |
| |
| QSIMPLEQ_INSERT_TAIL(&dirty_bitmap_mig_state.dbms_list, |
| dbms, entry); |
| } |
| } |
| |
| /* unset migration flags here, to not roll back it */ |
| QSIMPLEQ_FOREACH(dbms, &dirty_bitmap_mig_state.dbms_list, entry) { |
| bdrv_dirty_bitmap_skip_store(dbms->bitmap, true); |
| } |
| |
| if (QSIMPLEQ_EMPTY(&dirty_bitmap_mig_state.dbms_list)) { |
| dirty_bitmap_mig_state.no_bitmaps = true; |
| } |
| |
| return 0; |
| |
| fail: |
| dirty_bitmap_mig_cleanup(); |
| |
| return -1; |
| } |
| |
| /* Called with no lock taken. */ |
| static void bulk_phase_send_chunk(QEMUFile *f, DirtyBitmapMigBitmapState *dbms) |
| { |
| uint32_t nr_sectors = MIN(dbms->total_sectors - dbms->cur_sector, |
| dbms->sectors_per_chunk); |
| |
| send_bitmap_bits(f, dbms, dbms->cur_sector, nr_sectors); |
| |
| dbms->cur_sector += nr_sectors; |
| if (dbms->cur_sector >= dbms->total_sectors) { |
| dbms->bulk_completed = true; |
| } |
| } |
| |
| /* Called with no lock taken. */ |
| static void bulk_phase(QEMUFile *f, bool limit) |
| { |
| DirtyBitmapMigBitmapState *dbms; |
| |
| QSIMPLEQ_FOREACH(dbms, &dirty_bitmap_mig_state.dbms_list, entry) { |
| while (!dbms->bulk_completed) { |
| bulk_phase_send_chunk(f, dbms); |
| if (limit && qemu_file_rate_limit(f)) { |
| return; |
| } |
| } |
| } |
| |
| dirty_bitmap_mig_state.bulk_completed = true; |
| } |
| |
| /* for SaveVMHandlers */ |
| static void dirty_bitmap_save_cleanup(void *opaque) |
| { |
| dirty_bitmap_mig_cleanup(); |
| } |
| |
| static int dirty_bitmap_save_iterate(QEMUFile *f, void *opaque) |
| { |
| trace_dirty_bitmap_save_iterate(migration_in_postcopy()); |
| |
| if (migration_in_postcopy() && !dirty_bitmap_mig_state.bulk_completed) { |
| bulk_phase(f, true); |
| } |
| |
| qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS); |
| |
| return dirty_bitmap_mig_state.bulk_completed; |
| } |
| |
| /* Called with iothread lock taken. */ |
| |
| static int dirty_bitmap_save_complete(QEMUFile *f, void *opaque) |
| { |
| DirtyBitmapMigBitmapState *dbms; |
| trace_dirty_bitmap_save_complete_enter(); |
| |
| if (!dirty_bitmap_mig_state.bulk_completed) { |
| bulk_phase(f, false); |
| } |
| |
| QSIMPLEQ_FOREACH(dbms, &dirty_bitmap_mig_state.dbms_list, entry) { |
| send_bitmap_complete(f, dbms); |
| } |
| |
| qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS); |
| |
| trace_dirty_bitmap_save_complete_finish(); |
| |
| dirty_bitmap_mig_cleanup(); |
| return 0; |
| } |
| |
| static void dirty_bitmap_save_pending(QEMUFile *f, void *opaque, |
| uint64_t max_size, |
| uint64_t *res_precopy_only, |
| uint64_t *res_compatible, |
| uint64_t *res_postcopy_only) |
| { |
| DirtyBitmapMigBitmapState *dbms; |
| uint64_t pending = 0; |
| |
| qemu_mutex_lock_iothread(); |
| |
| QSIMPLEQ_FOREACH(dbms, &dirty_bitmap_mig_state.dbms_list, entry) { |
| uint64_t gran = bdrv_dirty_bitmap_granularity(dbms->bitmap); |
| uint64_t sectors = dbms->bulk_completed ? 0 : |
| dbms->total_sectors - dbms->cur_sector; |
| |
| pending += DIV_ROUND_UP(sectors * BDRV_SECTOR_SIZE, gran); |
| } |
| |
| qemu_mutex_unlock_iothread(); |
| |
| trace_dirty_bitmap_save_pending(pending, max_size); |
| |
| *res_postcopy_only += pending; |
| } |
| |
| /* First occurrence of this bitmap. It should be created if doesn't exist */ |
| static int dirty_bitmap_load_start(QEMUFile *f, DirtyBitmapLoadState *s) |
| { |
| Error *local_err = NULL; |
| uint32_t granularity = qemu_get_be32(f); |
| uint8_t flags = qemu_get_byte(f); |
| |
| if (s->bitmap) { |
| error_report("Bitmap with the same name ('%s') already exists on " |
| "destination", bdrv_dirty_bitmap_name(s->bitmap)); |
| return -EINVAL; |
| } else { |
| s->bitmap = bdrv_create_dirty_bitmap(s->bs, granularity, |
| s->bitmap_name, &local_err); |
| if (!s->bitmap) { |
| error_report_err(local_err); |
| return -EINVAL; |
| } |
| } |
| |
| if (flags & DIRTY_BITMAP_MIG_START_FLAG_RESERVED_MASK) { |
| error_report("Unknown flags in migrated dirty bitmap header: %x", |
| flags); |
| return -EINVAL; |
| } |
| |
| if (flags & DIRTY_BITMAP_MIG_START_FLAG_PERSISTENT) { |
| bdrv_dirty_bitmap_set_persistence(s->bitmap, true); |
| } |
| |
| bdrv_disable_dirty_bitmap(s->bitmap); |
| if (flags & DIRTY_BITMAP_MIG_START_FLAG_ENABLED) { |
| DirtyBitmapLoadBitmapState *b; |
| |
| bdrv_dirty_bitmap_create_successor(s->bs, s->bitmap, &local_err); |
| if (local_err) { |
| error_report_err(local_err); |
| return -EINVAL; |
| } |
| |
| b = g_new(DirtyBitmapLoadBitmapState, 1); |
| b->bs = s->bs; |
| b->bitmap = s->bitmap; |
| b->migrated = false; |
| enabled_bitmaps = g_slist_prepend(enabled_bitmaps, b); |
| } |
| |
| return 0; |
| } |
| |
| void dirty_bitmap_mig_before_vm_start(void) |
| { |
| GSList *item; |
| |
| qemu_mutex_lock(&finish_lock); |
| |
| for (item = enabled_bitmaps; item; item = g_slist_next(item)) { |
| DirtyBitmapLoadBitmapState *b = item->data; |
| |
| if (b->migrated) { |
| bdrv_enable_dirty_bitmap_locked(b->bitmap); |
| } else { |
| bdrv_dirty_bitmap_enable_successor(b->bitmap); |
| } |
| |
| g_free(b); |
| } |
| |
| g_slist_free(enabled_bitmaps); |
| enabled_bitmaps = NULL; |
| |
| qemu_mutex_unlock(&finish_lock); |
| } |
| |
| static void dirty_bitmap_load_complete(QEMUFile *f, DirtyBitmapLoadState *s) |
| { |
| GSList *item; |
| trace_dirty_bitmap_load_complete(); |
| bdrv_dirty_bitmap_deserialize_finish(s->bitmap); |
| |
| qemu_mutex_lock(&finish_lock); |
| |
| for (item = enabled_bitmaps; item; item = g_slist_next(item)) { |
| DirtyBitmapLoadBitmapState *b = item->data; |
| |
| if (b->bitmap == s->bitmap) { |
| b->migrated = true; |
| break; |
| } |
| } |
| |
| if (bdrv_dirty_bitmap_has_successor(s->bitmap)) { |
| bdrv_dirty_bitmap_lock(s->bitmap); |
| if (enabled_bitmaps == NULL) { |
| /* in postcopy */ |
| bdrv_reclaim_dirty_bitmap_locked(s->bs, s->bitmap, &error_abort); |
| bdrv_enable_dirty_bitmap_locked(s->bitmap); |
| } else { |
| /* target not started, successor must be empty */ |
| int64_t count = bdrv_get_dirty_count(s->bitmap); |
| BdrvDirtyBitmap *ret = bdrv_reclaim_dirty_bitmap_locked(s->bs, |
| s->bitmap, |
| NULL); |
| /* bdrv_reclaim_dirty_bitmap can fail only on no successor (it |
| * must be) or on merge fail, but merge can't fail when second |
| * bitmap is empty |
| */ |
| assert(ret == s->bitmap && |
| count == bdrv_get_dirty_count(s->bitmap)); |
| } |
| bdrv_dirty_bitmap_unlock(s->bitmap); |
| } |
| |
| qemu_mutex_unlock(&finish_lock); |
| } |
| |
| static int dirty_bitmap_load_bits(QEMUFile *f, DirtyBitmapLoadState *s) |
| { |
| uint64_t first_byte = qemu_get_be64(f) << BDRV_SECTOR_BITS; |
| uint64_t nr_bytes = (uint64_t)qemu_get_be32(f) << BDRV_SECTOR_BITS; |
| trace_dirty_bitmap_load_bits_enter(first_byte >> BDRV_SECTOR_BITS, |
| nr_bytes >> BDRV_SECTOR_BITS); |
| |
| if (s->flags & DIRTY_BITMAP_MIG_FLAG_ZEROES) { |
| trace_dirty_bitmap_load_bits_zeroes(); |
| bdrv_dirty_bitmap_deserialize_zeroes(s->bitmap, first_byte, nr_bytes, |
| false); |
| } else { |
| size_t ret; |
| uint8_t *buf; |
| uint64_t buf_size = qemu_get_be64(f); |
| uint64_t needed_size = |
| bdrv_dirty_bitmap_serialization_size(s->bitmap, |
| first_byte, nr_bytes); |
| |
| if (needed_size > buf_size || |
| buf_size > QEMU_ALIGN_UP(needed_size, 4 * sizeof(long)) |
| /* Here used same alignment as in send_bitmap_bits */ |
| ) { |
| error_report("Migrated bitmap granularity doesn't " |
| "match the destination bitmap '%s' granularity", |
| bdrv_dirty_bitmap_name(s->bitmap)); |
| return -EINVAL; |
| } |
| |
| buf = g_malloc(buf_size); |
| ret = qemu_get_buffer(f, buf, buf_size); |
| if (ret != buf_size) { |
| error_report("Failed to read bitmap bits"); |
| g_free(buf); |
| return -EIO; |
| } |
| |
| bdrv_dirty_bitmap_deserialize_part(s->bitmap, buf, first_byte, nr_bytes, |
| false); |
| g_free(buf); |
| } |
| |
| return 0; |
| } |
| |
| static int dirty_bitmap_load_header(QEMUFile *f, DirtyBitmapLoadState *s) |
| { |
| Error *local_err = NULL; |
| bool nothing; |
| s->flags = qemu_get_bitmap_flags(f); |
| trace_dirty_bitmap_load_header(s->flags); |
| |
| nothing = s->flags == (s->flags & DIRTY_BITMAP_MIG_FLAG_EOS); |
| |
| if (s->flags & DIRTY_BITMAP_MIG_FLAG_DEVICE_NAME) { |
| if (!qemu_get_counted_string(f, s->node_name)) { |
| error_report("Unable to read node name string"); |
| return -EINVAL; |
| } |
| s->bs = bdrv_lookup_bs(s->node_name, s->node_name, &local_err); |
| if (!s->bs) { |
| error_report_err(local_err); |
| return -EINVAL; |
| } |
| } else if (!s->bs && !nothing) { |
| error_report("Error: block device name is not set"); |
| return -EINVAL; |
| } |
| |
| if (s->flags & DIRTY_BITMAP_MIG_FLAG_BITMAP_NAME) { |
| if (!qemu_get_counted_string(f, s->bitmap_name)) { |
| error_report("Unable to read bitmap name string"); |
| return -EINVAL; |
| } |
| s->bitmap = bdrv_find_dirty_bitmap(s->bs, s->bitmap_name); |
| |
| /* bitmap may be NULL here, it wouldn't be an error if it is the |
| * first occurrence of the bitmap */ |
| if (!s->bitmap && !(s->flags & DIRTY_BITMAP_MIG_FLAG_START)) { |
| error_report("Error: unknown dirty bitmap " |
| "'%s' for block device '%s'", |
| s->bitmap_name, s->node_name); |
| return -EINVAL; |
| } |
| } else if (!s->bitmap && !nothing) { |
| error_report("Error: block device name is not set"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int dirty_bitmap_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| static DirtyBitmapLoadState s; |
| int ret = 0; |
| |
| trace_dirty_bitmap_load_enter(); |
| |
| if (version_id != 1) { |
| return -EINVAL; |
| } |
| |
| do { |
| ret = dirty_bitmap_load_header(f, &s); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| if (s.flags & DIRTY_BITMAP_MIG_FLAG_START) { |
| ret = dirty_bitmap_load_start(f, &s); |
| } else if (s.flags & DIRTY_BITMAP_MIG_FLAG_COMPLETE) { |
| dirty_bitmap_load_complete(f, &s); |
| } else if (s.flags & DIRTY_BITMAP_MIG_FLAG_BITS) { |
| ret = dirty_bitmap_load_bits(f, &s); |
| } |
| |
| if (!ret) { |
| ret = qemu_file_get_error(f); |
| } |
| |
| if (ret) { |
| return ret; |
| } |
| } while (!(s.flags & DIRTY_BITMAP_MIG_FLAG_EOS)); |
| |
| trace_dirty_bitmap_load_success(); |
| return 0; |
| } |
| |
| static int dirty_bitmap_save_setup(QEMUFile *f, void *opaque) |
| { |
| DirtyBitmapMigBitmapState *dbms = NULL; |
| if (init_dirty_bitmap_migration() < 0) { |
| return -1; |
| } |
| |
| QSIMPLEQ_FOREACH(dbms, &dirty_bitmap_mig_state.dbms_list, entry) { |
| send_bitmap_start(f, dbms); |
| } |
| qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS); |
| |
| return 0; |
| } |
| |
| static bool dirty_bitmap_is_active(void *opaque) |
| { |
| return migrate_dirty_bitmaps() && !dirty_bitmap_mig_state.no_bitmaps; |
| } |
| |
| static bool dirty_bitmap_is_active_iterate(void *opaque) |
| { |
| return dirty_bitmap_is_active(opaque) && !runstate_is_running(); |
| } |
| |
| static bool dirty_bitmap_has_postcopy(void *opaque) |
| { |
| return true; |
| } |
| |
| static SaveVMHandlers savevm_dirty_bitmap_handlers = { |
| .save_setup = dirty_bitmap_save_setup, |
| .save_live_complete_postcopy = dirty_bitmap_save_complete, |
| .save_live_complete_precopy = dirty_bitmap_save_complete, |
| .has_postcopy = dirty_bitmap_has_postcopy, |
| .save_live_pending = dirty_bitmap_save_pending, |
| .save_live_iterate = dirty_bitmap_save_iterate, |
| .is_active_iterate = dirty_bitmap_is_active_iterate, |
| .load_state = dirty_bitmap_load, |
| .save_cleanup = dirty_bitmap_save_cleanup, |
| .is_active = dirty_bitmap_is_active, |
| }; |
| |
| void dirty_bitmap_mig_init(void) |
| { |
| QSIMPLEQ_INIT(&dirty_bitmap_mig_state.dbms_list); |
| |
| register_savevm_live(NULL, "dirty-bitmap", 0, 1, |
| &savevm_dirty_bitmap_handlers, |
| &dirty_bitmap_mig_state); |
| } |